this is in regards to http://forum.xda-developers.com/showthread.php?t=754020
I'm ready to kick myself, it worked for everyone else, but here is what i get:
C:\and_sdk\tools>adb push exploid /sqlite_stmt_journals
failed to copy 'exploid' to '/sqlite_stmt_journals': Read-only file system
i have tried - remount command and it didn't do a thing.
please help!
dialbat said:
this is in regards to http://forum.xda-developers.com/showthread.php?t=754020
I'm ready to kick myself, it worked for everyone else, but here is what i get:
C:\and_sdk\tools>adb push exploid /sqlite_stmt_journals
failed to copy 'exploid' to '/sqlite_stmt_journals': Read-only file system
i have tried - remount command and it didn't do a thing.
please help!
Click to expand...
Click to collapse
You're in recovery mode right? I rooted before the tmobile update so I used the original method not the one you're using. I assume that for the most part you need to have your phone in recovery mode.
The /system/ directory is read only unless you're in recovery and I believe that's were that method attempts to write. You usually only get that message when you attempt to write to the system when not in recovery.
Thank you, but there is not a single word about puting phone into recovery mode in the instructions. Unless they mean it my default
i will try though.
Yeah, some steps are left out in certain 'common' tasks like rooting. It's assumed to be common knowledge or that if you don't know to automatically do a step then maybe you shouldn't be attempting it. At least that's the feeling I get sometimes but that's why it's important to search and ask if you don't find the answer.
Recovery mode is not necessary, nor possible at this point. The phone just needs to be on and connected with adb. No steps are left out (I've used this method), you just need to make sure you follow every step exactly.
Sent from my T-Mobile myTouch 3G Slide using XDA App
If it's under/system, you need to be in recovery. I rooted with the original method though, so I can't really tell you much.
guitarist5122 said:
Recovery mode is not necessary, nor possible at this point. The phone just needs to be on and connected with adb. No steps are left out (I've used this method), you just need to make sure you follow every step exactly.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
You're kidding about recovery mode right? I really hope so or that you stated that wrong... wow...
In order to write to ./system on the mytouch 3g slide you HAVE to be in recovery. Not saying this method has to be in recovery or not because I never used it. Just thought I'd throw out the suggestion to try it just in case it needs to be.
Well, i've followed steps to the point. I have rooted my phone before, so even though i am a newbe, i do have a general idea of the process.
But i have no idea why it just won't work for me.
I have tried putting it into recovery using loop script, otherwise it just states that it's in recovery and still won't let me write to it
KCRic said:
You're kidding about recovery mode right? I really hope so or that you stated that wrong... wow...
In order to write to ./system on the mytouch 3g slide you HAVE to be in recovery. Not saying this method has to be in recovery or not because I never used it. Just thought I'd throw out the suggestion to try it just in case it needs to be.
Click to expand...
Click to collapse
Why would I be kidding? It isn't necessary to be in recovery to push files to /system. I know since I've rooted my phone twice from a fully booted state (which is necessary to toggle the wifi).
Sent from my T-Mobile myTouch 3G Slide using XDA App
guitarist5122 said:
Why would I be kidding? It isn't necessary to be in recovery to push files to /system. I know since I've rooted my phone twice from a fully booted state (which is necessary to toggle the wifi).
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
Hmm... Allow me to copy and paste a few lines from that thread, written by the developer:
1:After many long hours of trying to restore my phone, I have now ported the exploid exploit to the MyTouch Slide! This means that you can gain root on any version of the Slide, INCLUDING the latest OTA! However, this isn't necessarily "easy" as in the One-Click Root program, but there are reasons for this. While Android is running we cannot write to /system and even if we force Linux to let us, the NAND protection will prevent Linux from completing the write!
2:Important: If you do nothing after step 12 then you are not "rooted." This program grants itself root permissions in a shell, that is ALL. If you want system-wide root access (what most people consider "rooted"), you MUST flash a custom ROM since the NAND protection on our device prevents us from giving global root access while inside the ROM. When following Eugene's instructions on flashing ENG, make note to NOT run the command 'su' if you already have a pound symbol (#) at your command prompt!
Basically, this 'root' method is actually a program that allows you to flash the ENG package to give you root. By itself, the program does nothing but allow you to operate inside the shell as root for a short time. Sort of like the 'sudo' command in linux - at least from what I can tell.
I'm aware of what the developer said. I'm also aware that I disregarded not having the phone booted since it would be a little tough to toggle wifi without being booted. If you don't believe it can be done, do a nandroid backup and unroot your phone and try rerooting. Pushing exploid and do the root whole process before flashing the eng-build while booted. Or just take my word. Personally I figure out for the life of me how anyone toggles the wifi (which is one of the steps) if not fully booted.
I don't argue just to be right. I just don't want people to be given incorrect info and never solve their problem. Rooting and can be frustrating on this phone if your not too familiar with rooting or using command prompt.
Sent from my T-Mobile myTouch 3G Slide using XDA App
I wan't saying the files can't be pushed while it's on, I've done that before but NAND will undo or not complete it once you reboot. It's the same reason that you can't delete a system app while the slide is booted - well you can but it will still be there, and once you reboot the delete is undone - unless you're in recovery.
All I was saying is that it's not a permanent write to the system, if that's where it's even being pushed and he still has to flash the ENG build to gain full root. I think this guy needs to just redo the steps, maybe read the old root methods to gain some insight too. It might help.
btw, I think there actually is a command to toggle wifi through adb, not sure if it does much in recovery or not. Also, not a chance in hell am I going to unroot - it was a pain in the a** catching my phone in recovery even when I used the loop.bat file
Good to know that's why my apps didn't stay deleted.
Sent from my T-Mobile myTouch 3G Slide using XDA App
I came across this thread while trying to understand why my rooted phone won't let me pull or rm from a terminal emulator. The way I rooted my phone was by flashing an update in recovery. Does anyone know of a file that would unroot by using the same method in recovery?
Thainfamous20v said:
I came across this thread while trying to understand why my rooted phone won't let me pull or rm from a terminal emulator. The way I rooted my phone was by flashing an update in recovery. Does anyone know of a file that would unroot by using the same method in recovery?
Click to expand...
Click to collapse
rm, rm -f or any other commmands will not work with terminal emulator because in order to use that program you phone has to be on, and since we can only write to the /system in recovery I'm sure you see what I'm getting at. You can still pull from the /system when the phone is on. The command isn't 'pull' though, it's:
Code:
cp <path to file> <location to copy to>
As far as the unroot thing, use the search bar [slide rom bible].
just found this thread while looking for a solution to the OP's problem (same as my own).
If my phone is ON, usb debugging ON, Charge Only, i cannot push exploid to /sqlite_stmt_journals.
this is what i did:
C:\android-sdk-windows\platform-tools>adb push exploid /sqlite_stmt_journals
failed to copy 'exploid' to '/sqlite_stmt_journals': Read-only file system
i tried to follow the directions as closely as possible. can someone please tell me where i'm going wrong here?
PunkRockJesus said:
just found this thread while looking for a solution to the OP's problem (same as my own).
If my phone is ON, usb debugging ON, Charge Only, i cannot push exploid to /sqlite_stmt_journals.
this is what i did:
C:\android-sdk-windows\platform-tools>adb push exploid /sqlite_stmt_journals
failed to copy 'exploid' to '/sqlite_stmt_journals': Read-only file system
i tried to follow the directions as closely as possible. can someone please tell me where i'm going wrong here?
Click to expand...
Click to collapse
Its been so long since i used that method and rooted i cant quite recall. But it does look like you need to change the path to c:/android-sdk-windows/platform-tools
Command prompt is picky about using / or \
Sent from my T-Mobile myTouch 3G Slide using XDA App
guitarist5122 said:
Its been so long since i used that method and rooted i cant quite recall. But it does look like you need to change the path to c:/android-sdk-windows/platform-tools
Command prompt is picky about using / or \
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
No, windows uses \ for local and local network file paths, it only uses / for remote locations and networks.
I'm not sure if this would work without already having root (I received my phone already rooted, never had to do it)
In command prompt, try
adb remount
You can also try this:
adb shell mount -o rw,remount /sqlite_stmt_journals
See if any of those work. Like I said, it may not, since those might be things that need root.
Any updates on this? I cannot push the file either. And "adb shell mount -o rw,remount /sqlite_stmt_journals" does nothing.
Related
I moved from an HD2 to the Evo this week (no more TMobile, woot!). I am very familiar with custom WMO ROMS, Hard SPL, blah blah...
I have nearly zero Android development, custom ROM knowledge, etc, however.
I'd like to flash a custom ROM based on the factory, without all the Sprint programs preloaded.
Clearly I need to root; I am on steady ground with that knowledge. After that? Not so clear. There doesn't seem to be a thread with the steps I need to proceed.
Any info would be invaluable, thanks!
(PS - side question: why does Android launch all sort of processes in the background seemingly at random?)
ifiweresolucky said:
I moved from an HD2 to the Evo this week (no more TMobile, woot!). I am very familiar with custom WMO ROMS, Hard SPL, blah blah...
I have nearly zero Android development, custom ROM knowledge, etc, however.
I'd like to flash a custom ROM based on the factory, without all the Sprint programs preloaded.
Clearly I need to root; I am on steady ground with that knowledge. After that? Not so clear. There doesn't seem to be a thread with the steps I need to proceed.
Any info would be invaluable, thanks!
(PS - side question: why does Android launch all sort of processes in the background seemingly at random?)
Click to expand...
Click to collapse
This should be in Q & A.. But unless someone creates a rom with the apps removed. Its easier to just do it yourself.
If you did toasts method of rooting. Boot into recovery and type this
adb remount
adb shell
cd /system/app
ls
This displays all apps on the phone. Do this to delete them.
rm NameOfApp.apk
rm NameOfApp.odex
It is caps sensitive and make sure you type the apk exactly as its written.
Jus10o said:
This should be in Q & A.. But unless someone creates a rom with the apps removed. Its easier to just do it yourself.
If you did toasts method of rooting. Boot into recovery and type this
adb remount
adb shell
cd /system/app
ls
This displays all apps on the phone. Do this to delete them.
rm NameOfApp.apk
rm NameOfApp.odex
It is caps sensitive and make sure you type the apk exactly as its written.
Click to expand...
Click to collapse
any reason adb remount isn't working for me? I do adb devices and my devices is there but when i type adb remount i get "remount faild: Invalid argument"
I started Toasts root directions, placing PC36IMG.zip on the base directory of the SD card. Shut down, loaded with the Vol Down and Power buttons. The bootloader checked the file on the SD card but then stopped on the white screen.
It seems it was supposed to proceed automatically? But I am dropped off with options on the white screen: FASTBOOT, RECOVERY, CLEAR STORAGE, SIMLOCK, and HBOOT USB.
Directions show Vol Up and Down for previous and next and Power for select.
Alright, I resolved this issue. I recopied the file to the SD card and made sure to eject drive before shutting the device down. Seemed to make all the difference! Proceeding with the remainder of Toast's directions now...
p-slim said:
any reason adb remount isn't working for me? I do adb devices and my devices is there but when i type adb remount i get "remount faild: Invalid argument"
Click to expand...
Click to collapse
I'm running in to the same issue...
rgordon3091 said:
I'm running in to the same issue...
Click to expand...
Click to collapse
i fixed it. you have to do this.
adb shell
mount /dev/block/mtdblock4 /system
cd /system/app
ls
Getting error trying to remove nascar..
Code:
rm Sprint_NASCAR.apk
rm failed for Sprint_NASCAR.apk, Directory not empty
Any ideas?
That's Linux trying to protect you. Essentially the rm command by default just removes one file at a time.
Try...
rm -r NameOfFolder
...to delete recursively.
Sent from my EVO 4G using Tapatalk
Go see the thread in the apps sub-forum about this. I have a post (#28, I believe) with the exact code to remove the bloatware. You can just copy any paste.
-------------
Sent from my HTC EVO 4G using Tapatalk Pro.
nick325i said:
Getting error trying to remove nascar..
Code:
rm Sprint_NASCAR.apk
rm failed for Sprint_NASCAR.apk, Directory not empty
Any ideas?
Click to expand...
Click to collapse
you shouldn't have a problem deleting the apk, because an apk is not a directory.
i deleted it without the same message.
p-slim said:
i fixed it. you have to do this.
adb shell
mount /dev/block/mtdblock4 /system
cd /system/app
ls
Click to expand...
Click to collapse
'
hmmm i put im adb shell then i got a "#" so i put in "mount /dev/block/mtdblock4 /system"
and i got mount:mounting /dev/block/mtdblock4 /system failed: No such file or directory
so what did i do wrong?
Found the issue. Thanks all
Jus10o said:
This should be in Q & A.. But unless someone creates a rom with the apps removed. Its easier to just do it yourself.
If you did toasts method of rooting. Boot into recovery and type this
adb remount
adb shell
cd /system/app
ls
This displays all apps on the phone. Do this to delete them.
rm NameOfApp.apk
rm NameOfApp.odex
It is caps sensitive and make sure you type the apk exactly as its written.
Click to expand...
Click to collapse
By the way, when I "cd /system/app" and then "ls" I see only NamesOfApps.apk. There are displayed no *.odex files. Is that normal?
thread dead?
IDK if this threads still monitored by anyone, but here's my question: I don't use adb, but I just rused root explorer to locate sprint crap, and added a .bak to the end of all of them to essentially 'disable' them. Is this a safe method? Will Android system waste energy looking for them anymore (they no longer show in app tray, but are they still using resources) ? Thanks much.
scottspa74 said:
IDK if this threads still monitored by anyone, but here's my question: I don't use adb, but I just rused root explorer to locate sprint crap, and added a .bak to the end of all of them to essentially 'disable' them. Is this a safe method? Will Android system waste energy looking for them anymore (they no longer show in app tray, but are they still using resources) ? Thanks much.
Click to expand...
Click to collapse
I was just about to say something similar. I had uninstalled Nascar using Titanium Backup, and the found out that I cant do the 2.2 OTA unless its there. TB didn't have the ability to restore it for some reason, so I got an APK from XDA, and put it in the system/app folder via Root Explorer. Then, I had to reset the permissions to match the other APK's, and it showed up and launched perfectly. Even did an update. Much easier than all that adb stuff, I think.
I used system app uninstaller for a buck on the market.. Easy and all there with the icons for easy to find and delete sprint and gapps.
Sent from my PC36100 using XDA App
scottspa74 said:
IDK if this threads still monitored by anyone, but here's my question: I don't use adb, but I just rused root explorer to locate sprint crap, and added a .bak to the end of all of them to essentially 'disable' them. Is this a safe method? Will Android system waste energy looking for them anymore (they no longer show in app tray, but are they still using resources) ? Thanks much.
Click to expand...
Click to collapse
Thats a good way.. If something goes wrong just have to rename.
Sent from my PC36100 using XDA App
Flash this zip and it should remove most of the Sprint apps. It will back them up to /sdx on your SD card so if anything is removed that you want, it will still be there. It's signed to work with RA.
http://grathwohl.me/uploads/android/evo/Sprint-Apps-Remover-signed.zip
I've seen a few people reference my post, but my post was really just trying to ask if anyone knew if, now that I've renamed them, and they don't run, they shouldn't be using up resources? Right, is that correct, or am I wrong in thinkin this?
And thanks cosine83, that's a really helpful post for a lot of people.
Hello,
I'm very new at this rooting stuff and I saw a lot of benefits from it so I thought I'd give it a try.
I've followed this root guide on MoDaCo, but I can't post a link here.
I also did the custom recovery image part (although I don't know what it is used for)
And I didn't make a goldcar either because someone told me I didn't have to do that as I don't have a carrier.
But my problem is I can't change anything as cmd keeps giving this error when I enter adb shell:
- exec ' system bin sh' failed no such file or directory (2)
I'm in my phone recovery and my usb cable is plugged in. This is the what I do and what it says:
C:\androidsdk\tools>adb shell mount /system
- exec ' system bin sh' failed no such file or directory (2) -
C:\androidsdk\tools>adb pull /system/usr/keylayout/bravo-keypad.kl c:\
remote object '/system/usr/keylayout/bravo-keypad.kl' does not exist
Any help is very welcomed as I've been searching the net for quite a while.
I'm not 100% sure what you are trying to achieve here. Are you trying to root, or have you already rooted?
socktug said:
I'm not 100% sure what you are trying to achieve here. Are you trying to root, or have you already rooted?
Click to expand...
Click to collapse
Sorry for being unclear. I've already rooted.
OK, and are you looking to remap the hardware keys?
As far as the goldcard goes, you don't need it if you rooted without one.
socktug said:
OK, and are you looking to remap the hardware keys?
As far as the goldcard goes, you don't need it if you rooted without one.
Click to expand...
Click to collapse
Yes that is correct, but when I enter adb shell it gives the error given above.
I don't think it's supposed to give that error.
Take a look HERE it might be of help.
socktug said:
Take a look HERE it might be of help.
Click to expand...
Click to collapse
Yes, that's the post I used to try it.
But it seems I can't pull the file. It says the file doesnt exist.
I'm not really up to speed with adb commands etc. I'd maybe try posting this in the dev section. Or chuck a post in there pointing to this one.
Sorry I can't help you more.
socktug said:
I'm not really up to speed with adb commands etc. I'd maybe try posting this in the dev section. Or chuck a post in there pointing to this one.
Sorry I can't help you more.
Click to expand...
Click to collapse
Ok, will do, thanks for the help!
I think I've found my problem. I've installed the app: rom manager and I can get into the custom recovery from there.
It seems I was uncapable of going in the custom recovery myself (probably because I'm doing something wrong). But I'd still like to know what I did wrong.
If you've got rom manager installed, flash into clockwork recovery and go to the partitions menu and mount system then re-do you adb commands.
There's also a fake-flash that provides an update.zip to boot you in recovery mode.
Sent from my HTC Desire using XDA App
dnlgee said:
If you've got rom manager installed, flash into clockwork recovery and go to the partitions menu and mount system then re-do you adb commands.
There's also a fake-flash that provides an update.zip to boot you in recovery mode.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Yes I've installed that fake flash, but I thought after installing it in the normal recovery it would take me directly to the custom recovery. Instead it just said the installation is complete without going to the custom recovery.
Everytime I want recovery mode I just load up rom manager and click reboot into recovery. However I find I can't mount my system directory through advanced cmd itself so have to mount through the partitions menu in clockwork.
Sorry of this doesn't help, I don't fully understand the issue..
Sent from my HTC Desire using XDA App
About 3 hours ago, I won a Desire Z (wheeey!) at the HTC London meetup. Naturally, I came straight here after the help I got in January rooting my Desire.
I used the Visionary method and obtained temp root status, and then attempted perm root, which seemed to work. All of the guides I have read include a bunch of steps after this, one of which included deleting Visionary, which I then did. I just turned the phone off, took the battery out for a bit and then turned it back on. I still have the Superuser icon and the Terminal Emulator indicates that I have root access... is that it then? It's that simple?
Please tell me if I've done anything wrong, as I don't want to flash Cyanogen and Clockwork Recovery if it's all going to go to hell on me. Any advice or confirmation on whether or not I've obtained perm root would be lovely.
Oh, my firmware version is 1.34.405... etc. Is this simply the last version which allows for such easy root?
Arconaught said:
About 3 hours ago, I won a Desire Z (wheeey!) at the HTC London meetup. Naturally, I came straight here after the help I got in January rooting my Desire.
I used the Visionary method and obtained temp root status, and then attempted perm root, which seemed to work. All of the guides I have read include a bunch of steps after this, one of which included deleting Visionary, which I then did. I just turned the phone off, took the battery out for a bit and then turned it back on. I still have the Superuser icon and the Terminal Emulator indicates that I have root access... is that it then? It's that simple?
Please tell me if I've done anything wrong, as I don't want to flash Cyanogen and Clockwork Recovery if it's all going to go to hell on me. Any advice or confirmation on whether or not I've obtained perm root would be lovely.
Oh, my firmware version is 1.34.405... etc. Is this simply the last version which allows for such easy root?
Click to expand...
Click to collapse
Having the SuperUser icon just means the app is installed, open up terminal and type 'su' to see if it throws up any errors
Sent from my HTC Vision using XDA App
I should have mentioned that I did that and got the # symbol, am I good to go?
Arconaught said:
I should have mentioned that I did that and got the # symbol, am I good to go?
Click to expand...
Click to collapse
In theory, yes; in practice, no. Visionary (with the G2/Desire Z, at least) is known to be a bit buggy. You shouldn't have any issues installing custom ROMs but, I would recommend using the wiki method to root.
Sent from my HTC Vision using XDA App
OriginalGabriel said:
In theory, yes; in practice, no. Visionary (with the G2/Desire Z, at least) is known to be a bit buggy. You shouldn't have any issues installing custom ROMs but, I would recommend using the wiki method to root.
Click to expand...
Click to collapse
My understanding, if he already used Visionary to root, and it worked than he should be good to go. Either it works, or it doesn't. The risk with Visionary is that it sometimes corrupts some partitions, which causes the phone to not boot. I haven't read any conclusive reports on Visionary causing long term issues (correct me if I'm wrong).
redpoint73 said:
My understanding, if he already used Visionary to root, and it worked than he should be good to go. Either it works, or it doesn't. The risk with Visionary is that it sometimes corrupts some partitions, which causes the phone to not boot. I haven't read any conclusive reports on Visionary causing long term issues (correct me if I'm wrong).
Click to expand...
Click to collapse
This is my understanding as well, though I'd probably still use GFREE to get S-OFF if I were OP.
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Arconaught said:
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Click to expand...
Click to collapse
I used the wiki method myself, those that used other methods (like Visionary) and were told to root via the wiki seem to have all just started at the beginning, from what I've read.
Sent from my HTC Vision using XDA App
Arconaught said:
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Click to expand...
Click to collapse
Whoa the Wiki method is completely different, looks like it was rewritten on 04/01.
You can completely ignore the temp rooting steps and concentrate on the gfree steps
From the "Necessary Files" section you need gfree, flash_image and ClockWorkMod Recovery
I would use the latest ClockWorkMod recovery rather than the one listed on the Wiki:
http://mirrorbrain.cyanogenmod.com/cm/recoveries/recovery-clockwork-3.0.2.4-vision.img (of course it's only the latest as of the time of this writing)
From step 2 you need to use:
Code:
$ adb push gfree /data/local/tmp/
$ adb push flash_image /data/local/tmp/
From step 2.a you need to use:
Code:
$ adb push recovery-clockwork-3.0.2.4-vision.img /data/local/tmp/recovery.img
Again note that the file name for CWM will depend on the version of CWM you are using.
Skip to step 4.b you need to use:
Code:
# cd /data/local/tmp
# ./gfree -f
# ./flash_image recovery recovery.img
# sync
Continue on as normal from here.
I skipped the temp root and perm root sections as you are already perm root.
I also skipped the ENG HBOOT parts, since that's not strictly necessary and the most risky part of the whole process (one mistake can result in a brick). If you want to flash the ENG HBOOT you would need to follow steps 4.a instead of 4.b, (you would also need the necessary HBOOT of course) the only command you need to omit from 4.a or 4.b is "# ./root_psn" which is the script which establishes permanent root.
Thanks a lot so far man, but I'm still stuck. I have adb, when I open it in the SDK, it flows for a bit, then closes. This is right, right? I'm meant to do all of these prompts via the cmd window?
OK, I've now sorted adb, but I can't get anything to work past that. Nothing will transfer to my phone and I'm going to kill... somebody.
Arconaught said:
OK, I've now sorted adb, but I can't get anything to work past that. Nothing will transfer to my phone and I'm going to kill... somebody.
Click to expand...
Click to collapse
You say you've sorted adb, but can you be more specific please ? What works and what doesn't work exactly ?
Ah, yeah, sorry. I got to the point where when I type in "adb devices" in the command window, it shows me my phone, with the serial number and whatnot. However, whenever i try the command:
$ adb push gfree /data/local/tmp/
It just won't work. I have all the files together in my desktop at the moment, having moved them from the downloads folder on my laptop. Is there a specific place I should have the stuff I need to send to my phone?
There is a great write up here about getting adb working. It sounds like either you didn't set up a "path" to use those commands anywhere or if you don't want to do that make sure your files are in the same folder as your adb.
Sent from my HTC Vision using XDA App
Arconaught said:
Ah, yeah, sorry. I got to the point where when I type in "adb devices" in the command window, it shows me my phone, with the serial number and whatnot. However, whenever i try the command:
$ adb push gfree /data/local/tmp/
It just won't work. I have all the files together in my desktop at the moment, having moved them from the downloads folder on my laptop. Is there a specific place I should have the stuff I need to send to my phone?
Click to expand...
Click to collapse
You need to have the files (extracted from the ZIP files you downloaded) in the same folder you run the ADB commands, if your ADB is in your path you should be able to run ADB commands from any folder.
To summarize you need to extract all the zips you downloaded under necessary files, all to the same folder. The open a command prompt and CD to that folder before you start using your adb push commands.
shortlived said:
There is a great write up here about getting adb working.
Click to expand...
Click to collapse
Yeah, steviewevie wrote it:
http://forum.xda-developers.com/showthread.php?t=865685
But it looks like he is willing to give the OP some personalized help.
Right, thanks guys, I think I'm making some progress.
ADB is all set up, and as far as I'm aware, having:
program files > android sdk > platform tools
on my path should mean I can open adb from anywhere right? I have all of the extracted files in platform tools, where adb is, in my program files... is this right, or have I completely missed the point here?
I keep getting "cannot stat 'gfree':: No such file or directory"
Sorry, I seem really stupid concerning this whole thing, but I'm sure it's something equally obvious that I'm just not seeing.
New problem. I worked out what I'd done wrong there, and got everything onto my phone. However, when trying to change the directory to /data/local/tmp, I keep getting "The system cannot find the path specified"
Now what am I doing wrong?
Arconaught said:
New problem. I worked out what I'd done wrong there, and got everything onto my phone. However, when trying to change the directory to /data/local/tmp, I keep getting "The system cannot find the path specified"
Now what am I doing wrong?
Click to expand...
Click to collapse
Remember you are running those commands (everything in that section) from an ADB shell, not from the Windows command prompt.
Excuse my ignorance, but what exactly do you mean by that? What should I do?
Rooted with this method completely stock kernel...
Ok I am new to Samsung but not new to rooting and using adb. I have been searching and maybe I missed something but I can not get adb working properly on my phone and pc. adb remount does not work so I can not push any files over. I have tried all the methods with mount -o rw,remount -t yaffs2 ... etc...
I can get su permissions on the phone but it will not allow me to transfer any files over at all. I even tried to r/w permission with Root Explorer while connected to phone through cmd window and nada. I am not running CWM so I would like to push files over if I can. I have done it the root explorer way of copy and paste its just that way seems so sloppy to me.
Any help would be appreciated since I cant seem to find a method on the web that works for me
Thanks guys
How are you typing the push command? Remember there are 2 sdcards on this phone.
For the internal sdcard
Code:
adb push c:\this\place /sdcard
for the external sdcard
Code:
adb push c:\this\place /sdcard/external_sd
You *shouldn't* have to use mnt/sdcard/external_sd but give it a shot just to be sure.
Doesn't this phone have to be on for ADB to work? I thought I read that. Obviously that seems a bit odd since most have to be in recovery. Or am I wrong about the on part?
Lastly, if you can run 'adb shell' then use the 'cp' or 'mv' commands to get the files on there.
EDIT: Ok, I completely just misread your post. You're trying to write to the /system? Try mount -o remount,rw /system
I don't know why everyone uses the yaffs, mmcblk, and all the other craziness. You still mount /system just with more typing. Let me know if it works.
KCRic said:
How are you typing the push command? Remember there are 2 sdcards on this phone.
For the internal sdcard
Code:
adb push c:\this\place /sdcard
for the external sdcard
Code:
adb push c:\this\place /sdcard/external_sd
You *shouldn't* have to use mnt/sdcard/external_sd but give it a shot just to be sure.
Doesn't this phone have to be on for ADB to work? I thought I read that. Obviously that seems a bit odd since most have to be in recovery. Or am I wrong about the on part?
Lastly, if you can run 'adb shell' then use the 'cp' or 'mv' commands to get the files on there.
Click to expand...
Click to collapse
tried cp and mv still gave me problems moving file. I forget the error message I got. Also I know the proper push commands I used to do it with my Evo all the time. Its just that this phone wont let me mount system. What do you mean be on ADB?
playya said:
tried cp and mv still gave me problems moving file. I forget the error message I got. Also I know the proper push commands I used to do it with my Evo all the time. Its just that this phone wont let me mount system. What do you mean be on ADB?
Click to expand...
Click to collapse
I meant the phone needs to be on (with debugging selected) in order to use ADB and write to it. At least that's what I think I remember seeing. Could be wrong since I haven't used ADB with this phone yet.
KCRic said:
I meant the phone needs to be on (with debugging selected) in order to use ADB and write to it. At least that's what I think I remember seeing. Could be wrong since I haven't used ADB with this phone yet.
Click to expand...
Click to collapse
correct all that has been done... all the basics you can think of have been done but it just keeps failing on adb remount
adb shell
$ su
#
no problem now, at first yes but I still cant mount system... driving me nuts since I dont use Clockwork right now I want to push files over... and my software on my pc AndroidCommander says NORoot has been obtained....
I'm probably as new to this phone as you are. Mostly just dealt with HTC. Past this point I have no idea what's going on. I can write to my /system - no problem. Hopefully one of the more seasoned guys will jump in here soon. Sorry I'm not much more of a help.
KCRic said:
I'm probably as new to this phone as you are. Mostly just dealt with HTC. Past this point I have no idea what's going on. I can write to my /system - no problem. Hopefully one of the more seasoned guys will jump in here soon. Sorry I'm not much more of a help.
Click to expand...
Click to collapse
what method did you use to root with... Is it the same as what I used the deoxeded stock method I posted above
Did u try with the Odin method? way easier.
Sent from my Galaxy SII √Epic4G Touch
skykc0401 said:
Did u try with the Odin method? way easier.
Sent from my Galaxy SII √Epic4G Touch
Click to expand...
Click to collapse
Odin method to do what? root? If so that is how I rooted thanks
I downloaded an app on the market that fix it.. thanks guys
Hi, I've got a noob question here: How do I properly remove Super User from my GSM Galaxy Nexus?
I used Wugs Root Toolkit and it applied some "permanent" superuser method. My question is, how can I go about deleting the files so that the APK is no longer on my phone? I don't mind rooting again if that's what is required to remove it.
I searched around and didn't find an answer--that said if this has already been answered somewhere before I apologize--maybe I just all around fail! I saw some posts that related to the Hero but yeah... pretty sure it doesn't apply to the GNex.
Thanks! Oh, and don't ask me why I want to do this, yeah yeah, I know I must be out of my mind. A follow-up question though, would be that if I decide to root again after this, is there a method of pushing superuser where it will be removed whenever the stock ROM is updated?
Thanks again!
Just use root explorer to delete it from system/ app
Sent from my Galaxy Nexus using Tapatalk 2
I was under the impression that, that would not completely work? Isn't there another file somewhere that has to be removed as well? Thanks for the response!
shadrage said:
Hi, I've got a noob question here: How do I properly remove Super User from my GSM Galaxy Nexus?
I used Wugs Root Toolkit and it applied some "permanent" superuser method. My question is, how can I go about deleting the files so that the APK is no longer on my phone? I don't mind rooting again if that's what is required to remove it.
I searched around and didn't find an answer--that said if this has already been answered somewhere before I apologize--maybe I just all around fail! I saw some posts that related to the Hero but yeah... pretty sure it doesn't apply to the GNex.
Thanks! Oh, and don't ask me why I want to do this, yeah yeah, I know I must be out of my mind. A follow-up question though, would be that if I decide to root again after this, is there a method of pushing superuser where it will be removed whenever the stock ROM is updated?
Thanks again!
Click to expand...
Click to collapse
This is another example of the pitfalls of trying to take shortcuts by using toolkits. Toolkits are fine to save time for those that understand what the toolkit is doing, but if you don't have that knowledege base, yo really should do things manually first, in order to learn. (In school, they don't let you use a calculator until you can add/sub/mult/div for a reason).
Take a look at this post, specifially method 2. See if you can figure out what those commands are actually doing.
I will help you out: you are essentially mounting the system partition as read-write, copying two files to the system, changing permission on the system, and then mounting the system as read-only.
So, in order to remove root, you need to mount the system as read-write, remove those two files (command is rm) and mount the system as read-only. [EDIT: depending on where the toolkit you used place su, it could be somewhere else than /system/bin, like /system/xbin or /system/sbin -- yet another reason not to use toolkits...]
Toolkits don't teach you that.
And for you follow-up question, the answer is no (if you are talking about updates). If you update using an OTA update, the update does not delete those two files, but it does change the permissions on them to disable root access.
Thanks Efrant! I'll try this out. Yeah, being lazy definitely didn't help me here
I used to flash my Vibrant all the time, but I got the Nexus so that hopefully I wouldn't need anything besides stock (for which I love the experience), so I'm just trying to stay as pure as possible
Thanks again, appreciate it!
shadrage said:
Thanks Efrant! I'll try this out. Yeah, being lazy definitely didn't help me here
I used to flash my Vibrant all the time, but I got the Nexus so that hopefully I wouldn't need anything besides stock (for which I love the experience), so I'm just trying to stay as pure as possible
Thanks again, appreciate it!
Click to expand...
Click to collapse
Give it a shot, and if you are having issues, post here and I'll guide you through it.
Appreciate it! I'll be fiddling around with it either tomorrow or the next day--pretty slammed this week.
Thanks again.
Let me know
shadrage, let me know what you figure out, and how you went about it, I'm stuck trying to figure out the same thing. If I figure it out, I'll give you instructions here.
nodnerb said:
shadrage, let me know what you figure out, and how you went about it, I'm stuck trying to figure out the same thing. If I figure it out, I'll give you instructions here.
Click to expand...
Click to collapse
It's very simple. If you still have root, just use root explorer and delete two files:
1) /system/app/Superuser.apk
2) the second file is su, and it could be in one of three places, depending on how you rooted:
/system/bin/su OR
/system/sbin/su OR
/system/xbin/su
That's it.
If you do not have root, go to the dev section and find an insecure boot image for the version of Android that you are running, download it, rename it to boot.img (if it isn't already), and place it in the same directory on your PC as you fastboot.exe and adb.exe files. Then boot into fastboot mode, plug your phone into your PC and type the following:
fastboot boot boot.img (wait for the device to boot)
adb remount
adb shell
rm /system/app/Superuser.apk
rm /system/bin/su
rm /system/sbin/su
rm /system/xbin/su
Done.
Now if you do not have root, and your bootloader is locked (and you are running 4.0.4), then you are out of luck. You will need to unlock your bootloader (which will wipe your data), and do the second method above/
Thanks
Thanks Efrant.
I'm trying to learn the ins and outs of adb, and it confuses me to no end. I'm slowing remembering playing with my dad's DOS computer when I was a kid, so command prompt and shell type work is coming back, but not easily.
efrant said:
This is another example of the pitfalls of trying to take shortcuts by using toolkits. Toolkits are fine to save time for those that understand what the toolkit is doing, but if you don't have that knowledege base, yo really should do things manually first, in order to learn. (In school, they don't let you use a calculator until you can add/sub/mult/div for a reason).
. . .
Click to expand...
Click to collapse
Exactly!
And how to only remove Superuser data?
I mean, I want Superuser to ask me again if I grant or not superuser-permision.
I need this because I have in Superuser 5 times Titanium Backup.
All has the same id but only one has the Titanium Backup icon and the other doesn't.
And if I try deleting the app from the list... the app just go to "Denied" but still there.
So, I want to delete the whole data so I get a clean list of apps.
Thanks!
settings >> apps >> all apps >> super user
clear cache, clear data
3rdstring said:
settings >> apps >> all apps >> super user
clear cache, clear data
Click to expand...
Click to collapse
Thanks man! I cannot believe I did not try that before.
Thanks!
efrant said:
If you do not have root, go to the dev section and find an insecure boot image for the version of Android that you are running, download it, rename it to boot.img (if it isn't already), and place it in the same directory on your PC as you fastboot.exe and adb.exe files. Then boot into fastboot mode, plug your phone into your PC and type the following:
fastboot boot boot.img (wait for the device to boot)
adb remount
adb shell
rm /system/app/Superuser.apk
rm /system/bin/su
rm /system/sbin/su
rm /system/xbin/su
Done.
Now if you do not have root, and your bootloader is locked (and you are running 4.0.4), then you are out of luck. You will need to unlock your bootloader (which will wipe your data), and do the second method above/
Click to expand...
Click to collapse
Having the same issue (I'm about to return the phone for a replacement so I want Superuser gone).
Can you maybe possibly kindly point me toward a good boot version of the file you're talking about? I'm running a Verizon Galaxy Nexus and I'm on version 4.0.4 Build IMM76K.
I found this link: http://forum.xda-developers.com/showthread.php?t=1631796 ...but I'm unsure what I should be downloading, renaming and throwing into my fastboot folder.
I understand I'll have to unlock the bootloader, but I'm going to wipe anyway since I'm sending it back. Any help with that part would be appreciated too.
Sorry if this is an unauthorized thread resurrection.
USA Prime Credit Peggy said:
Having the same issue (I'm about to return the phone for a replacement so I want Superuser gone).
Can you maybe possibly kindly point me toward a good boot version of the file you're talking about? I'm running a Verizon Galaxy Nexus and I'm on version 4.0.4 Build IMM76K.
I found this link: http://forum.xda-developers.com/showthread.php?t=1631796 ...but I'm unsure what I should be downloading, renaming and throwing into my fastboot folder.
I understand I'll have to unlock the bootloader, but I'm going to wipe anyway since I'm sending it back. Any help with that part would be appreciated too.
Sorry if this is an unauthorized thread resurrection.
Click to expand...
Click to collapse
Follow the instructions in this thread. It will take you back to stock, and there are instructions on re-locking the bootloader as well.
Had to restock my Nexus as well. but my USB didnt work so I decided to take my losses and just return it, rooted with Superuser.
I had spend 2 days trying to restock it. and then this Tech Guy from my Carrier Tells me...
O you have rooted your Phone. Well that might be a problem with the insurance... unless you got a Nexus Device.
I was like what do you mean.
wel with all nexus devices you are allowed to root your phone.
So I think this is the best Solution there is . just take it back and save yourself some time.
this really works!!!!
shadrage said:
Hi, I've got a noob question here: How do I properly remove Super User from my GSM Galaxy Nexus?
I used Wugs Root Toolkit and it applied some "permanent" superuser method. My question is, how can I go about deleting the files so that the APK is no longer on my phone? I don't mind rooting again if that's what is required to remove it.
I searched around and didn't find an answer--that said if this has already been answered somewhere before I apologize--maybe I just all around fail! I saw some posts that related to the Hero but yeah... pretty sure it doesn't apply to the GNex.
Thanks! Oh, and don't ask me why I want to do this, yeah yeah, I know I must be out of my mind. A follow-up question though, would be that if I decide to root again after this, is there a method of pushing superuser where it will be removed whenever the stock ROM is updated?
Thanks again!
Click to expand...
Click to collapse
1. after you have or have not unrooted, search up superuser on playstore
2. click uninstall, if it says uninstalling........, ignore that and go to home page
3. go to folder and delete cwm-root thingy(the zip file you copied to your folder when you rooted) and delete that(seriously, thats important)
4. make sure you have the root remover file in your external sd card
5. turn off device, reboot by holding power and down/left
6. select install zip from sd card and install the root remover file
7. reboot and superuser should be gone lol
keep in mind that i did this on my galaxy tab 2 10.1 so it will definitely work on that
should work with any device
hope this helped
lol
wow, old thread...
I have use root explorer to delete the Superuser.apk and system/bin/su
but once i restart my device, those two thing happen again and again.
Help!!!