I have got a vauxhall/opel uhp carkit in my car, my desire worked perfect with the carkit until the last update to android 2.2.
I finally found out wat caused this. This is the situation now:
When I connect the phone with the carkit it want to access the phonebook, if I accept this request the bluetooth disconnect. When I decline this request the carkit works fine and even the contacts are synchronised (no idea how this is possible but it works).
no problems so far, but the carkit keeps asking if it may access the phonebook even when I choose for always decline. Does someone know how I can make this request disappear? I must give an answer before I can use the carkit
I hope the story is a bit clear, I'm dutch so my english isn't very good.
Does someone have an answer?
Related
I have installed the Faria ROM on my Hermes and I can tell I am quite happy with it. Only thing I can't get to work is to use my Hermes with my AUDI built in handsfree carkit. I am able to get connected with it and I am also able to do phone calls, only thing is that there is no access to my phonebook, I also have tried to set the bluetooth to allow remot sim access, but still doesn't work. Does anybody know if there is a nweer bluetooth driver out there? Will be happy for any suggestion.
Thanks
Duke
I have Chryslers U-Connect and it accesses my phonebook I put into U-Connect. when connected , I have never been able to access my phonebook from my phone.
@pumpiron, sorry for the silly question, but what is U-connect and where would I get that from?
It comes with Chrysler Products. Check it out...http://www.jeep.com/crossbrand/uconnect/jeep/interface.html
Sorry to bring up this oldie, but I am now having this issue when trying to connect my bluetooth to my Kenwood radio. Downloading is extremely slow. These are the things I used to be able to do before I flash my Hermes with a new WinMo 6.5 ROM:
1. Dial a number through the radio. I now have to dial from the phone.
2. Calls log is not being downloaded. The only thing that shows up is the contacts list.
3. Simultaneous actions. Before the flash I used to be able to dial a number while information was being taken from the phone to the radio. This is no longer the case. I have to wait until info is downloaded before being able to make a call. This also prevents me from answering incoming calls.
Is there anyway to check what version of bluetooth (if any) is on the phone or if there's some type of upgrade?
Appreciate any help.
Hey guys,
i was wondering if anyone was facing this problem... i have the Alpine 103BT in my car which has an inbuilt parrot bluetooth system. I have noticed that when someone calls me it shows up on the lcd on the headunit then immediately drops the call! it shows up as a missed call on my tp2... but when i call using this bluetooth system then it works like a charm!
Any idea what i can do to change this? Is there a setting i have inadvertently changed?
I would really appreciate this because this call dropping really defeats the point of hands free!
Elfangor
I've got the same problem.
Just look a few posts down the list and you'll notice my 'cry for help'.
So far though, nobody's come to the rescue.
I've been reading that our phones have a unique BT-implementation, so it could be down to a bug in that area. If more people show up having similar issue, we might know.
Until then: fingers crossed and hope for sombody to post a solution.
Great! its not just me then! I hope it gets sorted! it gets on your nerves after awhile!
That's putting it mildly.
This sucks big-time: when on a business-call you definitely don't want your headset to die in you. During any conversation, really, but blasting along the motorway it's the last thing you need.
I also have an alpine 103 bt and an htc touch(elf) with onyx rom on it.
my problem is that when i make a call either from the head unit or the phone on the head unit it stops the music, displays CALLING and then after 3 seconds it displays ------------- , resumes the music, but the phone doesnt hang up. It continues the call, shows that is stil connected but you cant hear anything.
this is really frastrating as it does this sort of thing randomly and not always.
any thoughts?
Your symptoms sound a bit different from ours so it could be a totally different problem.
We might need to be paitient until one of the experts has a simiral experience and dived into the software.
Until then, I'm baffled.
eidikos said:
I also have an alpine 103 bt and an htc touch(elf) with onyx rom on it.
my problem is that when i make a call either from the head unit or the phone on the head unit it stops the music, displays CALLING and then after 3 seconds it displays ------------- , resumes the music, but the phone doesnt hang up. It continues the call, shows that is stil connected but you cant hear anything.
this is really frastrating as it does this sort of thing randomly and not always.
any thoughts?
Click to expand...
Click to collapse
Come to think of it... i have a similar problem.. when i get an incoming call it stops the music and registers a call and just a few second later..i get the --------------, and then the music comes back...by the time i fish my phone out of the pocket ive got a missed call! havnt noticed any problems when im calling though.
i tried repairing the phone to the unit but same thing! not sure what else i could do
Similar problem (I think)
Cant get a working setup in my car kit. I have a Jaguar XF SC with bluetooth handsfree...The TP2 (TMO US) pairs and docks fine, but doesnt work well. Incoming calls dont seem to be recognized, and outbound calls will dial and communicate, but wont hangup. When I hang up from the TP2, the car kit still thinks its connected and mutes the radio until i forcebly disconnect from TP2...
arg...
I've got exactly the same problem as the original poster. Mine's a vodafone TP2 with the standard vodafone rom. I've got the Alpine 104BTi. I can make outgoing calls ok but as has been described any incoming call will show the caller ID for about 1 ring and then it hangs up the call.
I've got a Jabra BT500 which works perfectly. I am wondering whether it may be the actual firmware in the Alpine device. If you look at the phone compatibility list on the Alpine website the TP2 is not listed. It worked fine with my Kaiser and this is listed as compatible.
I emailed their tech support and they said they are waiting for their customized version of the firmware from Parrot to be updated, possibly around September. I've noticed that for the Parrot standalone devices these all list the TouchPro2 as compatible, so maybe this will be fixed.
They did mention that the firmware update may only be available through the dealers. I'll keep an eye on their website. My current firmware version is 320.
I've read some other threads somewhere that people with the vodafone rom describe having problems with bluetooth that are fixed after flashing with a different rom so may turn out to be that.
Infuriating though.
It seems to be the poor implementation of the new BT stack
I have had similar problems to those described above, my Peugeot van has inbuilt BT (uses Parrot in implementation) which just misbehaves unbelievably including hanging up the current call if a new one comes in on call waiting, phonebook access is rediculously slow and buggy.
My Jabra BT8010 disconnects at random
My Jawbone disconnects very occasionally
The stack is full of bugs and HTC must know it - I reported it on their support system and firstly fobbed off, then they said they would look into it, then the log was auto closed - very convenient way to show they are meeting targets in resolving issues.
It is poor, poor and more poor. The new WIDCOMM stack looks great but doesnt really work.
Very poor for a flagship handset and they should sort something out
I went to an Alpine delearship who suggested what ukdoc was trying to do.. basically firmware update! Are you using a different Alpine website? Because the one i go to says coming soon on the page where software updates are supposed to be. I culdnt find any connection with parrot and alpine on the parrot website!
Basically what im asking is how are you going to be getting the firmware update and could you direct me towards it!
Many thanks Mate
Elfangor
rlsxda said:
Cant get a working setup in my car kit. I have a Jaguar XF SC with bluetooth handsfree...The TP2 (TMO US) pairs and docks fine, but doesnt work well. Incoming calls dont seem to be recognized, and outbound calls will dial and communicate, but wont hangup. When I hang up from the TP2, the car kit still thinks its connected and mutes the radio until i forcebly disconnect from TP2...
arg...
Click to expand...
Click to collapse
FYI, I just upgraded the radio to "4.46.25.24 - HTC" (see http://forum.xda-developers.com/showthread.php?t=549939) and the handsfree seems better...not sure it's perfect, but it does answer and hangup now...
Upgrade Alpine CDE-104BTi firmware from 320 to 360
I have just updated the firmware in my CDE-104BTi radio to version 360
http://www.alpine-electronics.co.uk/support/bluetooth-update-software.html
This has fixed the problem of not being able to recieve incomming calls on my HTC Touch Pro 2.
dsalter said:
I have just updated the firmware in my CDE-104BTi radio to version 360
http://www.alpine-electronics.co.uk/support/bluetooth-update-software.html
This has fixed the problem of not being able to recieve incomming calls on my HTC Touch Pro 2.
Click to expand...
Click to collapse
I've just done likewise, and can also receive incoming calls at last!
Hi
I just tried updating the BT in my Alpine 104bti. The laptop connects to the headunit but the update tool don't find the connection, I've tried disabling the antivirus etc. But it don't see the connection but the connection is displayed on the laptop.
Any Ideas whats wrong ?
Cheers Gomez...
SOLVED
Tried again using a laptop with Xp on worked first time, Seems Windows 7 was causing issues.
I have had the TP2 for a couple of weeks now and am generally very happy with it, but for some reason the Sim Access Profile is not working correctly with my Audi. I have paired the phone with the car and have enabled SAP in the phone's BT advanced settings page. Unfortunately the car will only access part of my phone book (only contacts under A to B are showing). The phone has all of my contacts on it and all of the other features of SAP seem to be working. I know that I can use JETware as an alternative but would like to know if I am doing something stupid with the phone before I go down the JETware route.
Any help would be appreciated, thanks.
I put my problem / question in this thread:
I use the TP2 in my skoda with a audi BT-SAP-Adapter this combination works, tested it before with my S/// X1.
When i pair my phone with the sap-Adapter the adapter recognizes that the TP2 can use the SAP-BT-profile and use the longer pairing PIN (when you pair a mobilephone wich has no SAP-profile the adapter use the Handsfree-profile and shows you a shorter PIN). As far, everything seems to work great.
But when my TP2 want´s than to connect with the adapter i see that the statusline shows the typical symbol for the flight mode and in the BT-menu at the BT-adapter i see the words "SIM-Access" for very short time (~ one second). Next the line “Stereo-profile” or something else (it is to fast to read) appears and half a second later the line “Handfsree” appears. The Symbol for a handsfree connection is shown at the statusline and the sign for flightmode changes back to the normal symbol for filedstrength.
what i tried as far to solve the problem:
1) i contacted the HTC-Support. They told me. that they made, at the moment, a test-row to solve specially the problems between HTC-WINMob-Handsets and car-handsfree-sets. So i got from there a software which i had to install at my phone and got a error-report. This i had to sent to HTC. No further comment from them.
2) i searched at very much forums at the car and mobilephone scene.
3) I tested the combination with different SIM-cards from different Providers and different ages.
4) I deleted my contacts at my SIM and wrote some newer one with an NOKIA Phone (this helped by some other SAP-car-FSEs)
5) I used No-Data
6) I installed the newest radio-rom.
Nothing of this brought some solution.
As i found at my recherches i´m not the only one who hast this problem with the HTC and sap-car-handsfree-set.
I thing, that this is a problem with the BT-Stack which is used at the TP2 and other HTC, is it?
Dose somebody solved this problem? Even with an other HTC with the same BT-Stack???
Has somebody any other idea to solve the problem??
Any help??
Merci
Quino666
I had no problems with SIM access on my 2010 A3 TDI -- worked flawlessly with my Tilt 2 with stock ROM. I haven't checked the car's phonebook lately, but last time I looked, everything was there.
1) With update on WM 6.5 or the first WM 6-version of the ROM?
2) Do you use a build in Handsfree solution with sap-profile or the adapter-solution?
Merci
Quino666
Hey,
I have a similiar Problem with the rSAP snap-in Adapter in my 2010 iDrive BMW. rSAP (telephony) just works great, but it only syncs the simcard's PhoneBook entries.
The BT-Monitor on my TP2 (Energy Rom WiMo 6.5.6) shows an active SAP and PBAP connection. Any ideas how I tell my TP2 to distribute the internal Exchange contacts and not the SIM-Contacts?
bye
Darky
Hello!
I have one question regarding BT when connected to my carkit. Here is the situation.
I owe a Citroen C5 III with factory supplied carkit. I had an HTC touch HD, which was working excellent. Then I have swiched to HTC TP2 and here is where the problems started. The TP2 connects to my carkit with no problems, but when I make a call the phone starts to work really slowly. It take about 30seconds to hang up the call I just had. If I want to make another call the phone still works very slowly, making the call takes about 1 minute. Phone strats to work fast again as soon as I disconnect the phone from carkit.
I have tried to change the roms (a lot of them with and without manila), I have taken my car to dealershop to updtae the BT on my carkit.
I there any solution for this problem?
Is there any way I can update or. downgrade the bluetooth drivers on TP2 so there would be the old interface just like the HD had?
Thanks a lot for all your help!
leonveliki said:
Hello!
I have one question regarding BT when connected to my carkit. Here is the situation.
I owe a Citroen C5 III with factory supplied carkit. I had an HTC touch HD, which was working excellent. Then I have swiched to HTC TP2 and here is where the problems started. The TP2 connects to my carkit with no problems, but when I make a call the phone starts to work really slowly. It take about 30seconds to hang up the call I just had. If I want to make another call the phone still works very slowly, making the call takes about 1 minute. Phone strats to work fast again as soon as I disconnect the phone from carkit.
I have tried to change the roms (a lot of them with and without manila), I have taken my car to dealershop to updtae the BT on my carkit.
I there any solution for this problem?
Is there any way I can update or. downgrade the bluetooth drivers on TP2 so there would be the old interface just like the HD had?
Thanks a lot for all your help!
Click to expand...
Click to collapse
Check out this thread: http://forum.xda-developers.com/showthread.php?t=591322
On page two there is a list of the registry edits to apply to fix issues between the Widcomm bluetooth stack and bluetooth car kits.
Dwboston, thanks for your reply. It helped a lot. I did the changes as described on second page on the link you have provided. I did not find the last entry I was supposed to change.
I went on a short test drive and looks like the carkit is now working perfectly. Tomorow I will go on a trip for two days. after that I will tell if the tweak worked.
Again, thanks a lot for the help. You have no idea how you made my day.
leonveliki said:
Dwboston, thanks for your reply. It helped a lot. I did the changes as described on second page on the link you have provided. I did not find the last entry I was supposed to change.
I went on a short test drive and looks like the carkit is now working perfectly. Tomorow I will go on a trip for two days. after that I will tell if the tweak worked.
Again, thanks a lot for the help. You have no idea how you made my day.
Click to expand...
Click to collapse
I didn't have the last entry either on my Tilt 2. So far the phone is working fine with the bluetooth system in my Acura. Hopefully it keeps working.
I did some testing. Although it works fast, the address book is now not synching with the carkit. Any idea about that?
leonveliki said:
I did some testing. Although it works fast, the address book is now not synching with the carkit. Any idea about that?
Click to expand...
Click to collapse
Sorry - not sure about that one. My bluetooth system doesn't support phonebook synching.
I figured it out. When I have changed the Change SupportedFeatures to 45, I have changed decimal value. Now I have set hex value to 45 it has started to work. dwboston thanks a lot for all you help. If you ever come to Slovenia, I will buy you a cup coffe.)
Hello everyone
I am running the Virtuous ROM and I'm having a small problem. Whenever I try to connect to my Kenwood car stereo (Parrot bluetooth hands-free system, I think) I can make and receive calls just fine, only the call lists don't get synced.
I might be wrong, but doesn't one usually have to give the hands-free permission to do that first? Interestingly enough, the two devices are pairing without any kind of password whatsoever. I find this rather strange and an FTP server aside, I haven't found many options to adjust in the bluetooth settings.
Am I missing something obvious here?
Regards and thank you.
Anybody? Anything?