Develop Bugs

ADB not seeing Evo

Sorry if this is a repost. But hopefully someone can help me out. I'm fully rooted, full nandroid unlock.full 100 yeards. Now this morning I was going to do the process for "Permanently replacing your recovery with ClockworkMod Recovery Image"
But for some strange reason, ADB doesn't see my Evo. I tried running "Command prompt" as administrator also and it wasa no go. I typed "adb devices" and my device wasn't listed like it was yesterday before I did a full nandroid Unlock.
Do anyone have any tips on how I can resolve this issue?
If this helps, I running the Bugless Beast Rom.
Thanks

You might have forgotten a step or two.
Open cmd
Type cd c:\android-sdk-windows\tools\ or wherever your sdk tools folder is.
Then it should work.

thanks. I'll give that a try and reply back

Strange thing....before I rooted/flashed a rom I created a Nandroid backup (I think it was stock. It doesn't have Superuser Permission in my list of Apps). Well I reverted back to that nandroid backup and now ADB sees my Evo.
I will flash back to my previous rom and trywhat you posted. Hopefully tat'll work

phatalboom said:
You might have forgotten a step or two.
Open cmd
Type cd c:\android-sdk-windows\tools\ or wherever your sdk tools folder is.
Then it should work.
Click to expand...
Click to collapse
Yeah, I tried what you suggested and itstill didn't see my Evo. I guess my only option is to revert back, then do the process.

Sometimes you need to restart the adb server. Try the following:
Code:
adb kill-server
adb shell
If you get a '#' then you're in.

I'm having same issues and it's not working. My device is not being seen. Do you I have to have the Evo in charging mode or Disk Mode?

chuckhriczko said:
Sometimes you need to restart the adb server. Try the following:
Code:
adb kill-server
adb shell
If you get a '#' then you're in.
Click to expand...
Click to collapse
or, you could just try
adb kill-server
adb start-server
lol
then check with
adb devices
seriously though, you may have put on a bad image. did you check the md5 hash? if not, do. there are threads around here on how to do that, if you are using windows. i don't have the link, because linux just has a command for it.

Try doing:
killall adb
sudo -s
adb devices
You must run adb as root on ur pc

timothydonohue said:
or, you could just try
adb kill-server
adb start-server
lol
then check with
adb devices
seriously though, you may have put on a bad image. did you check the md5 hash? if not, do. there are threads around here on how to do that, if you are using windows. i don't have the link, because linux just has a command for it.
Click to expand...
Click to collapse
Thanks for trying to help me out. But it still didn't work.
toastcfh said:
Try doing:
killall adb
sudo -s
adb devices
You must run adb as root on ur pc
Click to expand...
Click to collapse
What do you mean that I must run adb as root on my pc, i don't know what that mean. Do you mean run it by using the "Command prompt" program?
Also this only happens to me on the Bugless Beast Roms. When I revert back to my 1st nandroid backup that I was using before I flashed any rom, everything worked fine.

Is USB debugging enabled?

CentroniX said:
Is USB debugging enabled?
Click to expand...
Click to collapse
Thanks ...that fixed it! I enabled it typed "adb devices" and it showed up. thanks again!

No problem, glad you got it working! When I first started out I ran in to that trap over-and-over. Now I just make it a rule of thumb to turn it on after flashing and leave it on.
Have fun!

I would have started another thread, but this is basically a similar problem to the one I had at first with adb.
Ok...I was trying to install a rosie.apk that was in a zip format. Long story short, the OP informed me that he made a mistake and provided me the wrong information as to reinstalling the rosie.apk. He was giving me steps to "push it" via adb, instead of flashing it.
No problem to Poster and thanks for help if you reading this . But anyways after all that, When I open up "Cmd" and type anything with adb in front of it...adb devices, adb shell..., i get the message that adb is not recognized as a internal or external command. Before this incident happened i was able to just type "adb devices" and my Evo would show.
Do anyone know how to fix this?
By the way I also tried typing all the commands in the previous posts...and I get the same error message.
**Update** I got it working I had to redo the path. All is good now.
Thanks much!

You need to be in the tools directory of the sdk so cmd can find the adb command.

[Q] rooting slide in ubuntu

Hey If anyone can help i have a few questions about rooting the slide in ubuntu
the "loop" script will not run regardless of what i do....also i can't seem to get the phone to show up with adb devices when i am in the bootloader
i can see the phone when it is in the rom but for some reason it won't show in the bootloader
thanks in advance

just type
Code:
adb devices
in terminal, and then when you select recovery and press enter, press "ENTER, UP, ENTER, UP, ENTER, UP...) really fast...and hope it works! if not lather, rinse, repeat...

There are instructions in the rooting thread on making an equivalent script for MacOS (which should work under Linux as well.) If you tried to run a DOS batch file under Linux thinking it would work...well, that's a judgment for another day
-------------------------------------
Sent via the XDA Tapatalk App

The Mac script does not run as a sh script on linux.
(PS: don't for the ./ before adb on a linux term. (./adb etc...))
beartard said:
There are instructions in the rooting thread on making an equivalent script for MacOS (which should work under Linux as well.) If you tried to run a DOS batch file under Linux thinking it would work...well, that's a judgment for another day
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Sent from my T-Mobile myTouch 3G Slide using Tapatalk

Ive got a loop script for linux that I can send you when I get home. And like Indikut said, don't forget to add "./" before adb.

chrisinaz said:
Ive got a loop script for linux that I can send you when I get home. And like Indikut said, don't forget to add "./" before adb.
Click to expand...
Click to collapse
No need for the ./ if you added the sdk tools folder to your PATH.

Why that MacOS script doesn't work in bash on Ubuntu is beyond me. It looks to be formatted correctly.
Code:
#!/bin/sh
while [ 1 ]; do
adb devices;
sleep .25;
done
You could always use the following equivalent:
Code:
#!/bin/sh
watch -n .25 adb devices;
done
Assuming adb is in your path, this would run it every 1/4 second. You could, of course, change it to suit your location for adb (/usr/local/bin/adb or other location).

Cool thanks ..I will try that for the loop script
The other issue I have is that I can't see my phone as a device when I type adb devices in the bootloader ...it works fine when the phone is in the rom tho....I tried searching for the problem but I can't seem to find a solution ....I may just have overlooked it tho

beartard said:
Why that MacOS script doesn't work in bash on Ubuntu is beyond me. It looks to be formatted correctly.
Code:
#!/bin/sh
while [ 1 ]; do
adb devices;
sleep .25;
done
You could always use the following equivalent:
Code:
#!/bin/sh
watch -n .25 adb devices;
done
Assuming adb is in your path, this would run it every 1/4 second. You could, of course, change it to suit your location for adb (/usr/local/bin/adb or other location).
Click to expand...
Click to collapse
thanks again for the help with my problem i have a feeling the macos script would of worked i was using the wrong command i ended up typing "sh loop.sh" and it ran the script ....alltho i don't see it spamming adb devices ...it seems to just output it one time ....
now all i have to do is get the phone to show up when its in the bootloader....off to the search button i go

newspeak said:
thanks again for the help with my problem i have a feeling the macos script would of worked i was using the wrong command i ended up typing "sh loop.sh" and it ran the script ....alltho i don't see it spamming adb devices ...it seems to just output it one time ....
now all i have to do is get the phone to show up when its in the bootloader....off to the search button i go
Click to expand...
Click to collapse
As soon as you hit power to go to recovery either A) Activate the stupid script or B) mash ENTER+UP+ENTER+UP+ENTER until your keys fall off. I only got it to work the latter way.
Also, in Linux I've found that you'll get ???????? NO PERMISSIONS unless you do sudo ./adb devices.

The first time you run adb in a session, it should be started with sudo, since that starts the adb daemon. After that, any normal user's permissions (like running the script) should be ok. Make it easy on yourself and copy the adb executable to some place in your path (I use /usr/local/bin/). That way, you can delete the entire SDK unless you have plans for developing apps for Android.
I tried using my second code snippet above as loop.sh. I didn't go any higher, but it really doesn't have to work really quickly. I went up to .5 (executing "adb devices" twice a second) and it worked fine. You won't see a scrolling output like you would in DOS. The screen just updates if/when new info comes up (like showing the phone offline or in recovery.) When you get to the phone icon with the red triangle, hit VolUp and Power at the same time to get the recovery menu. The rest of the normal root tutorial should work for you.

ok thanks again for the help so far....here is where i am at ...i put adb in /usr/local/bin ...i can use adb devices ....the script is working for me but now when i get to the point where i push over the first file it says permission denied
i make sure to start adb with sudo ....i even tried running everything from a root terminal but i still get the same thing....i have already tried killing the adb server and restarting it with root permissions ...i have tried pushing the file with devices still listed as offline
kind of at a loss
here is what i get btw
"[email protected]:~/androidsdk/tools$ adb push ota.zip /sdcard/update.zip
failed to copy 'ota.zip' to '/sdcard/update.zip': Permission denied
[email protected]:~/androidsdk/tools$
"

I'm using a pretty fresh install of Ubuntu Lucid. I haven't messed with my user's groups or anything, so it's still fairly stock.
All I've done is copied adb to /usr/local/bin. The first run of adb (adb devices) is done as root using sudo. You could try running "sudo adb root" to begin with, and see if that makes a difference. After that, I can run any adb push commands as the normal user in GNOME's terminal.
Assuming you're set up like I am, if you're getting a permissions error after doing that, I'd hazard a guess and say the problem is on the phone's side rather than the computer.
Check and make sure USB debugging is checked in your settings. Beyond that, I'm stumped.

[GUIDE] Using ADB & FASTBOOT in OSX / Mac

Hi,
I thought I'd add this here because I've recently starting using OSX after building my own hackintosh out of PC parts. I got very fed up with Windows and the need for drivers all over the shop so I'm moved over now.
I've also just got into flashing my HTC Desire and it was made very easy by lots of the guys here. One thing that will always be useful when rooting and flashing your phone is ADB. There are lots of guides out there for ADB on Windows but I wanted to run in natively in OSX.
After a lot of research and a few failed attempts .... I've now worked out how to run ADB in OSX.
What you will need:
A Mac
USB cable
Android SDK for OSX- http://developer.android.com/sdk/index.html
At the time of writing this the version was "android-sdk_r08-mac_86" so please have a look at the above link and let me know if you can't find that same version.
So download the zip file and I would extract it to a folder where you are happy to keep it such as within your user home folder i.e. Macintosh HD/Users/{Your User Name} and for my mac it is Users/siedkins which is how I have my OSX set up.
Then open then still in Finder, open "android-sdk-mac_86" then "tools".
Now launch Terminal - ⌘ + space then type Terminal or Applications>Utilities>Terminal
Now drag and drop the file called "android" in the "tools" folder into your terminal window and you should see something like:
/Users/siedkins/android-sdk-mac_86/tools/android
Then hit enter - this should load Android SDK
Next go to Available Packages on the left and Android Repository > Android SDK Platform-tools, revision 1 -tick the box and hit "Install Selected"
It should download and install the Platform Tools which includes ADB !!!!
Now quit Android SDK after it has downloaded and go back into Finder. Now you should see a new folder "platform-tools" in the "android-sdk-mac_86" folder. Open that and you can now see a file called adb.
Now .... I am going to show you how to make your life a lot easier in Terminal to run ADB without having to navigate to the folder every time you want to launch it.
Go back to your Terminal window and type (or copy & paste):
Code:
cd ~
The screen should then look like
NAME_OF_YOUR_MACHINE:~ USERNAME$
For me I have:
Mac-Pro:~ siedkins$
Next, type
Code:
touch .bash_profile
to create your new bash / path file
Next, type
Code:
open -e .bash_profile
to open it in TextEdit.
Now into Text Edit please copy:
Code:
export PATH=${PATH}:
Then go into Finder and navigate your your "android-sdk-mac_86" folder. Then click on the "platform-tools" folder and drag and drop this into TextEdit at the end of the code above that you copied. Mine looks like:
export PATH=${PATH}:/Users/siedkins/android-sdk-mac_86/platform-tools/
Yours should look like:
export PATH=${PATH}:insert your path to the "platform-tools" folder in your Android SDK here
All you need is that one line. Then Save and exit TextEdit and then very importantly QUIT TERMINAL.
***** If you have issues being able to save the file at all then please jump to the bottom of the post*****
Now ........ to turn on USB Debugging in your handset Settings > Applications > Development > USB Debugging - ticked and also go to Settings > Connect to PC > Default connection type > Charge Only and also UNTICK "Ask me ..." there also. You can always go back here and change these settings back.
Now plug in your phone to a USB port. I noticed that if I plugged my phone into one of the standard USB ports on the front of my machine I couldn't see the phone further down the line and if I plugged it into a powered USB port on the front (I have an "akasa AK-ICR-08" which has a powered connector behind the 5 USB ports. But you guys will probably be using a MacBook or MacPro and there shouldn't be any issues with the power to your USB ports.
Now to launch ADB - re-open terminal (remember that you had quit it - very important!) then type in:
Code:
adb devices
And you should see:
List of devices attached
HXXXXXXXXXX device
where XXXXXXXX is your unique phone ID.
Now you can run all of your favourite ADB commands straight by typing:
adb shell
etc straight into Terminal. I won't go into that here as there are plenty of guides about what to do with ADB once it's installed!
Now you have ADB setup on your Mac and can run it without the need for installing HTC Sync - un-installing it - loading some modified drivers over the top !!!!
It all just works !!!!!!
Please drop me a line if you have any queries about this !
******************
If you are have user account issues such as Terminal or TextEdit says that you can't do anything then try adding "sudo" to the front of your terminal command as this will allow you to execute the account as a superuser or root user for OSX! ROOT!!! Note that you will have to enter your password to enable the superuser access rights and you won't see anything as you type in your password.
i.e. try:
Code:
sudo touch .bash_profile
then
Code:
sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit .bash_profile
(slight change in the coding here to ensure that TextEdit opens
Or you could do:
Code:
sudo pico .bash_profile
This will open up the Pico text editor instead of TextEdit. Here you will have to type out all of the text then you press "ctrl+x" to exit and then you can save on the next screen. To check that has worked you can then open the file in terminal again and check it with the normal command:
Code:
open -e .bash_profile
******************
Please see post #37 for How To Use ADB Over WIRELESS !!!!
************************************************************************
EDIT - 27th JAN 2010
FastBoot
I've now found you all a precompiled version of Fast Boot:
http://developer.htc.com/adp.html
Please download and unzip the precompiled version for OSX to your "SDK/platform-tools" folder.
Rename the unzipped file from "fastboot-mac" just to "fastboot". You need to fix the permissions of the fastboot file using CHMOD in Terminal.
In Terminal navigate to your "SDK/platform-tools" folder and then type:
Code:
ls
You should see all of the files in your "platform-tools" folder such as adb, aapt, fastboot, etc.
Then type:
Code:
chmod 777 fastboot
PLEASE NOTE THAT I AM ASSUMING THAT YOU HAVE CHANGED THE FILE NAME ABOVE !
Now with the permissions fixed you should be able to run fastboot.
Connect your phone via USB and set to "charging only". Then turn off your phone and leave the USB in. Then hold the back key and then turn your phone on again. You will have a white screen with 3 skateboarding androids on.
Now in Terminal type:
Code:
fastboot devices
And you should see your unqiue phone ID! (Note that you have to be at that white screen with the skateboarders for the "fastboot devices" code to run!
Now you have a fully working fastboot !!!
Sorry this explanation is a bit short - I did write out a longer one but my browser crashed and I lost it all. However if you cannot follow the above then I think it's maybe best that you don't use fastboot as you could seriously brick your phone.
NOTE - I HAVE NEVER USED FASTBOOT TO FLASH A RADIO OR PHONE SO I PROBABLY WON'T BE ABLE TO HELP IF YOU GET ERRORS IN USING FASTBOOT OR FLASHING YOUR DEVICE ! The above information is how to shortcut the navigation to the folder. Please don't blame me if you break the recovery image of your phone!

Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks

dhoshman said:
Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks
Click to expand...
Click to collapse
which last step ?

dhoshman said:
Thanks for such a thorough step by step guide. But Im having a problem I followed the directions and at the last step I get "permission denied". Any tips for me would be truly appreciated. Thanks
Click to expand...
Click to collapse
What version of MacOS? Also are you sure your device is properly rooted? I'm assuming you are getting the error when typing "adb devices"?
EDIT: That's what I get for being distracted while typing this.. ;-)

The easiest way to get the sdk is by using homebrew, which is an amazingly useful tool. https://github.com/mxcl/homebrew
Code:
brew install android-sdk
It doesn't add adb to your path however, you have to do that manually by adding /usr/local/Cellar/android-sdk/r8/platform-tools to your path.
Hope that makes it a little bit easier.

I found that on my mac using terminal I have to always start the adb commands with a ./ otherwise it wouldn't work right. This might be common knowledge for some, but I'm a terminal newbie
So, for example:
./adb devices

Thanks for the walk through
This work great. I put the the SDK folder on the root of Macintosh HD and renamed it to AndroidSDK. Then in the .bash_profile my path was /AndroidSDK/platform-tools/ . I then made a backup of my SD card with adb pull from /mnt/sdcard to my local machine.

mun-key said:
I found that on my mac using terminal I have to always start the adb commands with a ./ otherwise it wouldn't work right. This might be common knowledge for some, but I'm a terminal newbie
So, for example:
./adb devices
Click to expand...
Click to collapse
Kind of weird. To me that would mean that you're path variable isn't setup correctly. Usually the ./ before a command means to run the command from the current directory and ignore the path variable.

It doesn't even have to be this complicated. Download the sdk, whatever files you want to push to your phone put it in the same folder. Then do the commands (./adb push). Simple.

Great and easy tutorial! Got it working in 5min ^_^

madj42 said:
Kind of weird. To me that would mean that you're path variable isn't setup correctly. Usually the ./ before a command means to run the command from the current directory and ignore the path variable.
Click to expand...
Click to collapse
Ok - that makes sense now. And reading Krisrk's reply, that's exactly how I did it.
On my device I only needed to push a single file. Don't really need adb anymore. Your post was like 12-hours too late for me though. I spent 3 hours trying to figure out why it wouldn't work, then saw the ./ in a youtube video. After that I was rooted with a new rom in minutes
thanks for all the great info guys

Just wanted to thank you! I already had ADB working on my Mac OSX but didn't have the "environment variables" in the .bash_profile. So now I can just use adb commands directly without going into the finder and find the adb!
Also, kudos for the very detailed guide with your own examples, that reads very well!

Thanks for the comments guys.
I know that you can navigate to the SDK folder and just run it from there but I thought that people might like the above guide to do the shortcut once and then never have to jump around folders again in terminal which is a bit of a pain. Plus my method removes the need for the "./" prefix.
anyways I'm easy I'm sure that everyone will have their own preferred method if you already use adb on OSX

i cannot get beyond the command:
touch .bash_profile
the terminal returns permission denied. what do i need to add or what am i doing wrong?

What type of user account do you have set up in OSX?
System Prefs > Accounts
Also what about trying the following in Terminal
Code:
sudo touch .bash_profile
And then enter the password for your user profile?
Any better?

Thanks for this!!!!!
Nobody ever shows macs love.
Sent From My HTC Evo 4G Using Tapa Talk Pro!

siedkins said:
What type of user account do you have set up in OSX?
System Prefs > Accounts
Also what about trying the following in Terminal
Code:
sudo touch .bash_profile
And then enter the password for your user profile?
Any better?
Click to expand...
Click to collapse
it popped up and asked my password, then it said i entered the wrong one and i never was asked this again. this is incredibly frustrating as i cannot even get it to work in windows
edit: ok got to the part where i bring up text edit, but it will not let me save. states i do not have permission to save. is there a way i can turn off this password crap for the time being? all i want to do is push files to my phone, i can't even get this far

Ok...
I'm trying not to look stupid, but for gods sake, im stuck at the first command. I copy paste cd~ and nothing happens. press enter nothing. I've been reading up on terminal and i still feel quite stupid considering how im stuck on step one
edit: got it! I got lost going back into the same terminal and not closing the android sdk window. there fore I was still in the sdk and not telling the computer anything. a dur. Opening a new terminal and doing all of the steps did the trick. Thanks for this btw!

thanks for the detailed guide. i've been looking all over the web for a guide to setup adb for MAC. followed the steps here and now, i'm able to use ADB on my macbook. YAY!!

monstereo said:
thanks for the detailed guide. i've been looking all over the web for a guide to setup adb for MAC. followed the steps here and now, i'm able to use ADB on my macbook. YAY!!
Click to expand...
Click to collapse
Hey just a random note, nice prof pic stig ftw

[Q] Temporary Nand Unlock

How do you gain temporary nand unlock? All i wanted to do is copy 2 files into the /system/xbin/bb which doesnt seem to work with root explorer despite super user permission, copy paste just wont work.
Any ideas how to copy paste these 2 files without going to full s-off? Would the adb method work? or any other apk that can do the job?
Thanks in advance for those who can help and any tips is very much appreciated.

In recovery with adb.

TheGhost1233 said:
In recovery with adb.
Click to expand...
Click to collapse
any links to it? a guide perhaps? thanks for the tip.

Make a nandroid before messing with the system partition.
Then:
Code:
adb remount
adb push <file_name> /system/xbin/bb
This is what i think it is just looking at the basic adb commands, here is some more info about moving stuff to the system partition.

TheGhost1233 said:
Make a nandroid before messing with the system partition.
Then:
Code:
adb remount
adb push <file_name> /system/xbin/bb
This is what i think it is just looking at the basic adb commands, here is some more info about moving stuff to the system partition.
Click to expand...
Click to collapse
btw, how do i get to adb with recovery?

You do know that adb is part of the android sdk and not some function/app on the phone?
To get adb working (i hope you already installed it) just boot in to recovery, connect the usb cable, and launch adb via command prompt or terminal.

TheGhost1233 said:
You do know that adb is part of the android sdk and not some function/app on the phone?
To get adb working (i hope you already installed it) just boot in to recovery, connect the usb cable, and launch adb via command prompt or terminal.
Click to expand...
Click to collapse
many thanks! i will try this tommorow.

Use the update.zip I attached in this thread, you don't need to worry about adb then.
http://forum.xda-developers.com/showthread.php?t=885506&page=2
Sent from my HTC Desire using XDA App

Ghettonine said:
many thanks! i will try this tommorow.
Click to expand...
Click to collapse
Ok I did my best, read alot about adb and followed some tips but I just cant seem to get these things working. I need a DETAILED step by step procedure.
I feel such a noob today, can anyone please help?
Basically, I just wanted to copy "ifconfig" and "route" from "/system/xbin" to "system/xbin/bb" and thats it! Im s-on by the way and dont want a full s-off just to copy paste 2 files.
I tried rebooting in recovery with adb and run some commands on "adb shell", many things came out and I have no idea what it ment.

Well many things came out is not such a great description. So i have no idea if something is wrong or something happened which you did not expect.
Boot again in to recovery and connect adb.
The type "adb devices" this should output something like:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT##########
If this does not happen you don't have a connection and most likely have driver issues (only if you are on windows). If you do get a connection next thing to do is mount the system partition as read/write. To do this type "adb remount".
The output should be "remount succeeded"
Next type "adb shell"
This should give "#" as output .
Since you know where the files are and where you want them to go type "mv /system/xbin/ifconfig /system/xbin/bb" and hit enter, you don't get any conformation about this. Next type "mv /system/xbin/route /system/xbin/bb"
To check if they go moved correctly type " ls /system/xbin/bb", now you should see the files listed.
Next type "exit" to end the adb shell.
Then type "adb reboot".
If this doesn't work you need to give more info about the errors you get or maybe someone else has a better description.
A completly other method is, if you are able to copy the files to your computer, useing the .zip mercianary linked to, just make sure the system/app folder is empty and that you make the system/xbin/bb folder and place the files in there. Then just follow the instructions.

Stuck in bootloop but has very important files.

The bootloop started very randomly one day and my phone kept restarting and the battery became very hot.(I was asleep so I noticed this after I woke up). I had already switched to an iphone but I was using the moto g for music and stuff like that. I was able to boot once and then the storage suddenly got full and the bootloop started again. So, I just removed the battery and left it. I have a whatsapp backup on it that has some very important data which I need at the moment. The phone is stock without root or cwm. Usb debugging was on, I don't know if that helps though. I really need to recover just that one backup file. I went through quite a few threads and didn't find anything that could help me. Is there any way to recover it. I don't mind if the process is tedious.

Z91 said:
The bootloop started very randomly one day and my phone kept restarting and the battery became very hot.(I was asleep so I noticed this after I woke up). I had already switched to an iphone but I was using the moto g for music and stuff like that. I was able to boot once and then the storage suddenly got full and the bootloop started again. So, I just removed the battery and left it. I have a whatsapp backup on it that has some very important data which I need at the moment. The phone is stock without root or cwm. Usb debugging was on, I don't know if that helps though. I really need to recover just that one backup file. I went through quite a few threads and didn't find anything that could help me. Is there any way to recover it. I don't mind if the process is tedious.
Click to expand...
Click to collapse
I guess you can pull files from your phone via ADB commands. Can you get into recovery mode?

sharjeel.019 said:
I guess you can pull files from your phone via ADB commands. Can you get into recovery mode?
Click to expand...
Click to collapse
I can get into recovery but adb only works in sideload so I can't do stuff like adb pull, etc.

If your bootloader is unlocked you can flash twrp and then pull files via adb or by mtp (drag and drop files to pc)
If your bootloader is locked there's nothing you can do
Note adb doesn't work in stock recovery

TheFixItMan said:
If your bootloader is unlocked you can flash twrp and then pull files via adb or by mtp (drag and drop files to pc)
If your bootloader is locked there's nothing you can do
Note adb doesn't work in stock recovery
Click to expand...
Click to collapse
I haven't unlocked the bootloader so I'm assuming it's locked. Is there no way around it?

Z91 said:
I haven't unlocked the bootloader so I'm assuming it's locked. Is there no way around it?
Click to expand...
Click to collapse
No - unlocking the bootloader requires a data wipe
Technically if adb debugging is enabled your phone might boot enough for adb to become available but it might only be for a few seconds before it restarts
You'll keep having to type
adb devices
And see if you get a device listed but the chances of it being available long enough for you to pull anything is pretty much zero

TheFixItMan said:
No - unlocking the bootloader requires a data wipe
Technically if adb debugging is enabled your phone might boot enough for adb to become available but it might only be for a few seconds before it restarts
You'll keep having to type
adb devices
And see if you get a device listed but the chances of it being available long enough for you to pull anything is pretty much zero
Click to expand...
Click to collapse
Ohh, I don't remember exactly where but while researching I had read that it's possible to stop the phone at that boot stage. Is something like that doable?

Z91 said:
Ohh, I don't remember exactly where but while researching I had read that it's possible to stop the phone at that boot stage. Is something like that doable?
Click to expand...
Click to collapse
Found this it may help
Create a script and run it when adb is available on the device - usually sometime after boot logo
Windows version batch script eg run.bat
Code:
@ECHO off
cd /d %~dp0
echo.
echo Waiting for device…
adb wait-for-device
echo.
adb -d shell stop
adb pull (put directory location here)
Linux Version script eg run.sh
Code:
#!/system/bin/sh
echo " "
echo "Wating for device..."
./adb wait-for-device
echo " "
./adb -d shell stop
./adb pull (location of directory here)

TheFixItMan said:
Found this it may help
Create a script and run it when adb is available on the device - usually sometime after boot logo
Windows version batch script eg run.bat
Code:
@ECHO off
cd /d %~dp0
echo.
echo Waiting for device…
adb wait-for-device
echo.
adb -d shell stop
adb pull (put directory location here)
Linux Version script eg run.sh
Code:
#!/system/bin/sh
echo " "
echo "Wating for device..."
./adb wait-for-device
echo " "
./adb -d shell stop
./adb pull (location of directory here)
Click to expand...
Click to collapse
So, I tried this. Bu I realized soon that adb devices was recognizing the device during the boot. SO, the scrip couldn't work I guess. Do I have to do something so that the phone gets recognized during boot.

Z91 said:
So, I tried this. Bu I realized soon that adb devices was recognizing the device during the boot. SO, the scrip couldn't work I guess. Do I have to do something so that the phone gets recognized during boot.
Click to expand...
Click to collapse
If your phone doesn't reach the stage where adb is enabled there's nothing you can do