Hi everyone.
I am trying to wipe data/factory reset my phone through ClockworkMod recovery v2.5.0.7.
But when i press the trackball for it to be wiped, i get an error message.
"Formatting SDEXT...
No app2sd partition found. Skipping format of /sd-ext.
Formatting SDCART:/android_secure...
Data wipe complete"
And when i try to load a ROM after that i get:
"E: Can't mount /dev/block/mmcblk0p2
(File exists)
e:Can't mount SDECT:
E:Failure at line 11:
copy_dir PACKAGE:data SDEXT:
Installation aborted"
Anyone know how to fix that ?
No one? This is really important.
I have some problem...
you need an ext partiton.....maybe its corrupt, re-patition
Related
I did a root to my HTC desire using unrevoked v3.21 and than v3.22 and now i can't wipe data, can't wipe cache and can't install roms. I have HBOOT v.0.93.0001
as soon as i go to recovery i get:
clockworkmod recovery v2.5.0.7
E:can't find MISC:
E:can't mount CACHE:recovery/command
E:can't find MISC:
E:can't mount CACHE:recovery/log
E:can't find MISC:
when try to wpe data/factory reset I get:
Formatting DATA...
....
No app2sd partition found. skipping format of /sd-ext.
formatting SDCARD:/.android_secure...
Data wipe complete.
E:can't mount CACHE:recovery/log
E:can't find MISC:
and when i flash a rom it starts and than i get an error status 7 or something else for other roms.
where did it all go wrong????
why did you root twice??
shaigiv said:
I did a root to my HTC desire using unrevoked v3.21 and than v3.22 and now i can't wipe data, can't wipe cache and can't install roms. I have HBOOT v.0.93.0001
as soon as i go to recovery i get:
clockworkmod recovery v2.5.0.7
E:can't find MISC:
E:can't mount CACHE:recovery/command
E:can't find MISC:
E:can't mount CACHE:recovery/log
E:can't find MISC:
when try to wpe data/factory reset I get:
Formatting DATA...
....
No app2sd partition found. skipping format of /sd-ext.
formatting SDCARD:/.android_secure...
Data wipe complete.
E:can't mount CACHE:recovery/log
E:can't find MISC:
and when i flash a rom it starts and than i get an error status 7 or something else for other roms.
where did it all go wrong????
Click to expand...
Click to collapse
The MISC partition is where certain important things (such as USB mount settings (this is where USB Bricking occurs) and location settings) live. I'm not sure how this happened, but i destinctly remember 3.21 being pulled because it caused this exact problem. I'm not sure how you can proceed from here, perhaps someone more knowledgeable will be able to help.
Though, I also wonder. Why did you root twice?
I didn't know what else to do and I thought maybe another root will make it better. and I saw somewhere that v3.22 is the first version compatiable to HBOOT 0.93 (saw it too late...)
if I'll de-grade to 2.1 with HBOOT 0.83, will it help?
Try to flash an RUU while in fastboot.
I might not be in the right place for this post but I am hoping someone might have a min to help me generally with an issue I am having..Ok here is the problem I am having... A few days ago I went into recovery to do a backup (using clockwork 2.5.1.0 with busybox 1.16.0) and I have never had any problems with it but got an error not allowing me to wipe got this.
Formatting DATA...
Formatting DATADATA...
E:Can't mount /dev/block/stl10
(File exists)
Error Mounting /datadata/!
Skipping format...
Formatting CACHE...
Formatting SDEXT...
No app2sd partitiion found. Skipping format of /sd-ext.
Formatting SDCARD:/.android_secure...
Data wipe complete.
E:Can't mount /dev/block/stl11
(file exists)
E:Can't mount CACHE:recovery/log
E:Can't mount /dev/block/stl11
(file exists)
so I figured Oh well will just roll back to a prior backup one I did maybe 3 weeks prior, tried to do a restore and also go this
Checking MD5 sums... it waits for a while nothing going on the bar and then
Restoring system...
E:Can't mount /dev/block/stl11
(file exists)
Error mounting /system/!
Skipping format...
E:Can't mount /dev/block/stl11
(file exists)
E:Can't mount Cache:recovery/log
E:Can't mount /dev/block/stl11
(file exists)
I don't know what to do
I was running Skyraider semi current version with uncommon sense overlay.
Any thoughts or suggestions on how to get back to being able to run a backup?
vzw said:
I might not be in the right place for this post but I am hoping someone might have a min to help me generally with an issue I am having..Ok here is the problem I am having... A few days ago I went into recovery to do a backup (using clockwork 2.5.1.0 with busybox 1.16.0) and I have never had any problems with it but got an error not allowing me to wipe got this.
Formatting DATA...
Formatting DATADATA...
E:Can't mount /dev/block/stl10
(File exists)
Error Mounting /datadata/!
Skipping format...
Formatting CACHE...
Formatting SDEXT...
No app2sd partitiion found. Skipping format of /sd-ext.
Formatting SDCARD:/.android_secure...
Data wipe complete.
E:Can't mount /dev/block/stl11
(file exists)
E:Can't mount CACHE:recovery/log
E:Can't mount /dev/block/stl11
(file exists)
so I figured Oh well will just roll back to a prior backup one I did maybe 3 weeks prior, tried to do a restore and also go this
Checking MD5 sums... it waits for a while nothing going on the bar and then
Restoring system...
E:Can't mount /dev/block/stl11
(file exists)
Error mounting /system/!
Skipping format...
E:Can't mount /dev/block/stl11
(file exists)
E:Can't mount Cache:recovery/log
E:Can't mount /dev/block/stl11
(file exists)
I don't know what to do
I was running Skyraider semi current version with uncommon sense overlay.
Any thoughts or suggestions on how to get back to being able to run a backup?
Click to expand...
Click to collapse
Personally I would backup the sd-card, format it, put the files back on, and install a fresh ROM.
Sounds like /data/data has a corrupt file.
Can you mount DATADATA in recovery, then on a PC, do a "adb shell ls /data/data" and get me an output?
The same thing happened to me its not fun. I tryed to do what g said, for me it didnt work but TRY his method first. I tryed a bunch of different things i flashed the ruu back to stock 2.1, erased sd and reformatted, reinstalled clockwork and some other things and still nothing. What i ended up doing was useing a different recovery i use ra now and i havint had any problems since.
HTC Incredible 2.3.1
Hoping someone might have a min to help me generally with an issue I am having..Ok here is the problem I am having... A few days ago I went into recovery to do a backup (using clockwork 2.5.1.0 with busybox 1.16.0) and I have never had any problems with it but got an error not allowing me to wipe got this.
Formatting DATA...
Formatting DATADATA...
E:Can't mount /dev/block/stl10
(File exists)
Error Mounting /datadata/!
Skipping format...
Formatting CACHE...
Formatting SDEXT...
No app2sd partitiion found. Skipping format of /sd-ext.
Formatting SDCARD:/.android_secure...
Data wipe complete.
E:Can't mount /dev/block/stl11
(file exists)
E:Can't mount CACHE:recovery/log
E:Can't mount /dev/block/stl11
(file exists)
so I figured Oh well will just roll back to a prior backup one I did maybe 3 weeks prior, tried to do a restore and also go this
Checking MD5 sums... it waits for a while nothing going on the bar and then
Restoring system...
E:Can't mount /dev/block/stl11
(file exists)
Error mounting /system/!
Skipping format...
E:Can't mount /dev/block/stl11
(file exists)
E:Can't mount Cache:recovery/log
E:Can't mount /dev/block/stl11
(file exists)
I don't know what to do
I was running Skyraider semi current version with uncommon sense overlay.
Any thoughts or suggestions on how to get back to being able to run a backup?
perhaps a corrupted sd card.... take everything off of it then format to fat32, put stuff back on and see if it works
The data/data fail is what bothers me. And I've never seen that dev/block error on the Incredible either. Did you do anything else in Clockwork or otherwise prior to this that could lend clues? Was your SD or internal memory approaching full? And perhaps most importantly...did you reformat prior to this?
Also just to be clear, are you still up and running other than the backup/restore issue or are you only able to access recovery at this point?
I've gotten that data/data fail error on some of the newer clockworkmod recoveries, always end up going back to 2.5.0.5 and it works great
Hello!
I had 3.4.2 stock ROM on my Defy and everything worked well.
My mate tried to install the older 2.51 stock ROM, it failed.
I've successfuly instelled the 3.4.2 back, but unfortunately my market does not work. When I try to install an app, it go to a downloading loop.
"Downloading... Paused... Downloading... Download unsuccessful."
It is only 3 seconds.
I've tried to do these things:
Flashed 3 different kind of 3.4.2 - Market does not work.
Flashed with 2.3.3 latest Stock ROM - Market does not work.
I've tried to delete market cache files, tried with different google account.
If anyone could help, please reply!
Thank you!
Have you wiped data/factory reset, wiped cache and dalvik cache before flashing the back the 3.4.2?
Yes, I've tried, but is it normal tthat in CWM Recovery cant mount things:
E:Can't mount /dev/block/mmcblk1p24
(invalid argument)
E:Can't mount CACHE: recovery/command
E:Can't mount /dev/block/mmcblk1p24
E:Can't mount CACHE:recovery/log
E:Can't open CACHE:recovery/log
E:Can't mount /dev/block/mmcblk1p24
When I try to wipe everything the same lines appear, but it says Wipe done!.
Here are the lines:
-- Wiping data...
Formatting DATA: ...
Formatting CACHE:...
E:Can't mount /dev/block/mmcblk1p24
Error mounting /cache/!
Skipping format...
Formatting SDEXT:...
No app2sd partition found. Skipping format of /sd-ext.
Formatting SDCARD:/.android_secure...
Data wipe complete.
E:Can't mount CACHE:recovery/log
E:Can't open CACHE:recovery/log
E:Can't mount /dev/block/mmcblk1p24
It's pretty annoying.
Thanks for your reply
did you manage to solve this issue?
I'm having the same issues are you are.
wifi or not
tuxx42 said:
did you manage to solve this issue?
I'm having the same issues are you are.
Click to expand...
Click to collapse
check to see in settings if downloads are only allowed when wifi is on ..
I noticed when booting into CWM on my Arc (V5.0.2.7 by Doomlord) I'm receiving errors regarding the cache partition not being able to be mounted.
Below is what is appearing:
E: failed to find "cache" partition to mount at "/cache"
e: can't mount /cache/recovery/last_log
e: can't open /cache/recovery/last_log
Now, here is what I've done so far:
- I've tried to wipe the cache, but same error
- Tried to format the cache but I receive the below error:
E: format_volume: no MTB partition "cache"
This leads me to believe there is something wrong with the partition table?
Has anyone got a fix for this on the Arc?
Thanks
Dion
I think ur partition seems to be broken.
Try to reformat the partition
Sent from my Anzu using xda premium
I've already tried to reformat the partition, and I receive this error "E: format_volume: no MTB partition "cache""
Anyone have any ideas?