After i flashed JG4 using odin it's showing a Unable to mount error...
How to overcome this error??
This is the error
E:cant mount /dev/block/st110
(invalid argument)
E:copy_dbdata_media:cant mount DBDATA:
copy default media content failed
Which phone do you have? i9000m?
I9000GT
INDIA
Came with JG4
flashing stock JG4 with s1_odin_20100513.pit.
knanda said:
I9000GT
INDIA
Came with JG4
flashing stock JG4 with s1_odin_20100513.pit.
Click to expand...
Click to collapse
try to tick re-partition, or use pit512 to flash.
hope you can solve your problem.
Where can i find 512pit fiie??
Can u post a link if possible??
Thanks in advance..
Where do i need to put the .tar i downloaded?I put it in PDA.
pit512 is available @ samfirmware.com.
if it is a single tar file, yes, put it in the pda.
Here's the 512 PIT. Un-rar it before using it with Odin.
knanda said:
Where do i need to put the .tar i downloaded?I put it in PDA.
Click to expand...
Click to collapse
Only put it in pda and use 512 ... but out of curiosity , why are you flashing older firmware ? you giving it to the service center or something ? use jm8 / jm9 they work really well ..
Related
Please can some1 provide me this file...
http://www.samfirmware.com/WEBPROTECT-i9000.htm
andrewluecke said:
http://www.samfirmware.com/WEBPROTECT-i9000.htm
Click to expand...
Click to collapse
the .rar file only contains CSC and PDA files... and after flashin there is no network as PHONE file is missing....
any suggestions please...
Just install any rom that have all these files and then using registry fix upgrade to the latest DDJG4 ROM which is far more better and stable..
am using the same ... after changing a lot of rom .. its the best i found for indian galaxies.. need more help .. do write dowm.
U can also directly install DDJG4 through ODIN.. it has all the files .... i never needed modem or csc file only pda and pit did the upgrade.
dewimagica said:
Just install any rom that have all these files and then using registry fix upgrade to the latest DDJG4 ROM which is far more better and stable..
am using the same ... after changing a lot of rom .. its the best i found for indian galaxies.. need more help .. do write dowm.
U can also directly install DDJG4 through ODIN.. it has all the files .... i never needed modem or csc file only pda and pit did the upgrade.
Click to expand...
Click to collapse
i get this error if i try to directly update DDJG4...
update media, please wait...
E:can't mount /dev/block/st110 (invalid argument)now
E:copy_dbdata_media:can't mount DBDATA:copy default media content failed.
ne proper way to be followed to flash the phone...
harshad_kp said:
i get this error if i try to directly update DDJG4...
update media, please wait...
E:can't mount /dev/block/st110 (invalid argument)now
E:copy_dbdata_media:can't mount DBDATA:copy default media content failed.
ne proper way to be followed to flash the phone...
Click to expand...
Click to collapse
Did you enable repartition checkbox while flashing via odin and did you use the 512.pit file? If I 'm not wrong ddjg4 is a single tar which has the pda, modem and csc. Select pda in odin and point to the tar file.
Sent from my GT-I9000 using XDA App
somberi said:
Did you enable repartition checkbox while flashing via odin and did you use the 512.pit file? If I 'm not wrong ddjg4 is a single tar which has the pda, modem and csc. Select pda in odin and point to the tar file.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i enabled repartition but still getin the same error.... do i have to format my phone b4 doin it.. m using XXJPC firmware currently and want to move back to the official one... please help...
JPC is a real pain ... has lot of bugs .. also it changes the product code to KOR after reading a lot i managed to get back my product code to INU ....
Try doing a factory reset and then flashing with ODIN with repartition on .... or use the registry hack method and upgrade to DDJG4 via kies.
first format ur internal sd card and then ur device and then try the method below
the rar file ddjg4 contains 2 files 1)add_odd and 2) dll file. , add_odd .. is a tar file just ignore the dll file...
1) open odin , tick the repartition ..
2) select the 512.pit file
3) select the add_odd as pda
4)remove the sim and the sd card
5) put the battery and the back cover
6) put ur device in the download mode
7) connect device to computer (using data cable)
8) click start
and i think you should be back to ddjg4
devabhishek said:
first format ur internal sd card and then ur device and then try the method below
the rar file ddjg4 contains 2 files 1)add_odd and 2) dll file. , add_odd .. is a tar file just ignore the dll file...
1) open odin , tick the repartition ..
2) select the 512.pit file
3) select the add_odd as pda
4)remove the sim and the sd card
5) put the battery and the back cover
6) put ur device in the download mode
7) connect device to computer (using data cable)
8) click start
and i think you should be back to ddjg4
Click to expand...
Click to collapse
thanks wil try and let u know the result...
CURRENTLY UNDER INVESTIGATION
Just to let everyone know
LINKS REMOVED.
Gonna try it later tonight
Hi, I download ROM P1000XWJJ7 ## and unrar. in subdirectory is folder name
P1000XXJJ3... This is new ? Where is change log ?
well i also noticed that but could be a typo.. dunno, you would have to ask samfirmware guys because i haven't had the change to flash it myself.
Just successfully flashed this over JJ4 and everything works fine.
zyborg said:
Just successfully flashed this over JJ4 and everything works fine.
Click to expand...
Click to collapse
Which pit file did you use? I used P1_add_hidden.pit (with repartion active), and now my tab does not boot...
After the flash and rebbot I got this error:
"E: Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI for format and reboot actions.
copy default media content failed."
I have used P1_20100909.pit with repartition, P1_add_hidden.pit with and without repartition...
Any suggestions?
Thanks...
mascian said:
Which pit file did you use? I used P1_add_hidden.pit (with repartion active), and now my tab does not boot...
Click to expand...
Click to collapse
It is not a full flash. You should flash this over a working tab with no repartition.
So flash back to a firmware which is a full flash (like XWJJ4) and the flash this one with no repartition. Should work.
Can someone who flashed this post the build date for this firmware?
*#*#44336#*#*
Thanks.
clubtech said:
Can someone who flashed this post the build date for this firmware?
*#*#44336#*#*
Thanks.
Click to expand...
Click to collapse
Ok, my mistake .. thanks a lot clubtech!
The build date is:
2010.10.30
October 30, 2010.
clubtech said:
Can someone who flashed this post the build date for this firmware?
*#*#44336#*#*
Thanks.
Click to expand...
Click to collapse
Step by step upgrade instruction?
Hi,
can anyone explain step by step instruction to upgrade?
I am with P1000XXJID and when I try to upgrade there is an error, then I try with re-partition and now there is problem with the boot of the device. Any help?
Thank you
teodorp said:
Hi,
can anyone explain step by step instruction to upgrade?
I am with P1000XXJID and when I try to upgrade there is an error, then I try with re-partition and now there is problem with the boot of the device. Any help?
Thank you
Click to expand...
Click to collapse
READ my reply a few posts up.
clubtech said:
READ my reply a few posts up.
Click to expand...
Click to collapse
I read it but I do not know how to install XWJJ4 after the message
"E: Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI for format and reboot actions.
copy default media content failed."
Can you help me?
mascian said:
After the flash and rebbot I got this error:
"E: Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI for format and reboot actions.
copy default media content failed."
I have used P1_20100909.pit with repartition, P1_add_hidden.pit with and without repartition...
Any suggestions?
Thanks...
Click to expand...
Click to collapse
Hi,
I have the same problem, can you help me with instruction how I can resolve this?
teodorp said:
Hi,
I have the same problem, can you help me with instruction how I can resolve this?
Click to expand...
Click to collapse
OK, I got the screen of death going from JID to JJ7. However, note that from the screen'o'death, you can still use Odin and flash away.
So, I read a bit, saw JJ6 was a full flash, grabbed that off samfirmware, flashed it (with the pit, repartition) that was included in the archive.
Then, with that base, I then just flashed JJ7 by itself (as the PDA) and that worked fine.
So no worries.
I am not entirely sold on JJ7 however. Doesn't feel as smooth as JID did.
Gotta play more though.
spekesel said:
OK, I got the screen of death going from JID to JJ7. However, note that from the screen'o'death, you can still use Odin and flash away.
So, I read a bit, saw JJ6 was a full flash, grabbed that off samfirmware, flashed it (with the pit, repartition) that was included in the archive.
Then, with that base, I then just flashed JJ7 by itself (as the PDA) and that worked fine.
So no worries.
I am not entirely sold on JJ7 however. Doesn't feel as smooth as JID did.
Gotta play more though.
Click to expand...
Click to collapse
Pls, give me the link to the JJ6 - I can not found it in in samfirmware
teodorp said:
Pls, give me the link to the JJ6 - I can not found it in in samfirmware
Click to expand...
Click to collapse
ahem, JJ4 I mean. My bad
spekesel said:
ahem, JJ4 I mean. My bad
Click to expand...
Click to collapse
JJ4 and I am trying with P1_EUR.PIT and P1_add_hidden.PIT but without success. Which PIT did you use?
teodorp said:
JJ4 and I am trying with P1_EUR.PIT and P1_add_hidden.PIT but without success. Which PIT did you use?
Click to expand...
Click to collapse
I used the P1_add_hidden.PIT.
I used the PIT, the PDA/Modem/CSC, without repartition selected to flash JJ4. That worked for me. (from a failed JID -> JJ7 flash and screen'o'death)
I am however back to JID, I found JJ7 to be kinda slow. But it could also be I suck at knowing what PIT with which firmware.
sir i have download update for my sgy. after download complete i have open it with winRAR in pc i got only 2 file in it, one is in *.tar.md5 formate and another one is in *.dll .now i have selected *.tar.md5 as pda in odin and click on start and its fail to install... then again i have done but it alaways show fail...for more information i google it for solution but i didnt get usefull info. someone said to rename it to .tar i have done that too...but unsuccessful...so i thought that this file may be currupted so again i have download another ddlc3 update for sgy. but unfortuntly this also contain same extension *.md5 i try this too but it is also showing fail... please help me... for kind information i alaways untick re-partation...before updating
post here http://forum.xda-developers.com/showthread.php?t=1600373
http://galaxyydroid.wordpress.com/2012/06/16/stock-rom-cwm-flashable-with-14-toggles-status-bar/ flaah stock rom via cwm recovery
Hope this help you, if u found this helpful den press Thanks
shailu1990 said:
sir i have download update for my sgy. after download complete i have open it with winRAR in pc i got only 2 file in it, one is in *.tar.md5 formate and another one is in *.dll .now i have selected *.tar.md5 as pda in odin and click on start and its fail to install... then again i have done but it alaways show fail...for more information i google it for solution but i didnt get usefull info. someone said to rename it to .tar i have done that too...but unsuccessful...so i thought that this file may be currupted so again i have download another ddlc3 update for sgy. but unfortuntly this also contain same extension *.md5 i try this too but it is also showing fail... please help me... for kind information i alaways untick re-partation...before updating
Click to expand...
Click to collapse
u downloaded the wrong zip.. try other ones
its single file not support flash using odin(galaxy y odin 1.84/1.85) .....................
convert it odin package(3 file) using doky73 great tool
[TOOL] SplitFUS -create your own Odin ready pack
or
find ur odin package hare
[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
WHAT IS THE USE OF .pit FILE?
.pit FILE IS USED TO DIRECT THE PARTITION OF THE WHOLE ANDROID SYSTEM..JUST LIKE WE ARE DOING GRUB IN PC...HERE ALSO WE NEED TO PARTITION THE SYSTEM FOR FLASHING THE FIRMWARE PROPERLY.. AND HERE THE .PIT IS USED
1. Get your phone into download mode..
2. connect to computer. Make sure that usb drivers installed and you have the firmware.tar file.
3. Now open odin 3.10
4. click on PIT and select ZEROLTE_USA_TMO.pit
5. Make sure that partition is tick
6. click on PDA and select firmware.tar file
7. Now start button and wait...You are done
link:
https://drive.google.com/folderview...tmV3YxMTB4WGpSZU5ReEI1WjZtUXM&usp=sharing_eid
Mhhh could be useful great job Op
The link doesn't work for me, could you reupload it? Also does this contain data about your /data partition? If so this might be specific to your model (16/32/64 GB)
update the file
update the file
SHATTAH said:
update the file
Click to expand...
Click to collapse
Just requested permission for the file.
SHATTAH said:
WHAT IS THE USE OF .pit FILE?
.pit FILE IS USED TO DIRECT THE PARTITION OF THE WHOLE ANDROID SYSTEM..JUST LIKE WE ARE DOING GRUB IN PC...HERE ALSO WE NEED TO PARTITION THE SYSTEM FOR FLASHING THE FIRMWARE PROPERLY.. AND HERE THE .PIT IS USED
1. Get your phone into download mode..
2. connect to computer. Make sure that usb drivers installed and you have the firmware.tar file.
3. Now open odin 3.10
4. click on PIT and select ZEROLTE_USA_TMO.pit
5. Make sure that partition is tick
6. click on PDA and select firmware.tar file
7. Now start button and wait...You are done
link:
https://drive.google.com/folderview...tmV3YxMTB4WGpSZU5ReEI1WjZtUXM&usp=sharing_eid
Click to expand...
Click to collapse
Can you please explain how you got the pit file? from what I understand you cannot simply dump the pit anymore unless I missed something.
requested access to this as well-- can you post somewhere other than Google Drive as people cant get to this file?!
can you please grant my request to download the file? I have a soft bricked phone and I really need the Pit file. thanks so much
looking a pit file for latest firmware 5.1.1 G925TUVU2COF6 does anyone have?
onlineunlocks said:
looking a pit file for latest firmware 5.1.1 G925TUVU2COF6 does anyone have?
Click to expand...
Click to collapse
According to: http://www.droidviews.com/how-to-extract-pit-file-from-samsung-galaxy-devices/
Requirement: To be able to use any of the methods described below [to extract the PIT file], you must have root privilege on your Galaxy device. Both the methods have been tested on the Samsung Galaxy S5.
Click to expand...
Click to collapse
This means that, unless someone gets it directly from Samsung somehow (leak, release, or otherwise), you'll need to wait for root on the 5.1.1 stock ROM.
I don't know a whole lot about the PIT file, and why someone would ever need it (apart from screwing around so much that you overwrite your partition information on the device... which would be hard for the average user to accidentally do).
Have you tried Samsung Smart-Switch? I don't know if it's capable, but it might download the PIT info from the internet before restoring stock firmware on a 100% borked device.
Thank you for the reply; by adb I know does not work without root as I looked over those methods. But there is also Heimdall that should be able to extract the pit while in download mode and has the option to save it,but seems not supporting this device. Also odin performs this tasks " Get PIT for mapping.." ,but does it automatically and there is no option to save from a working device with same details to use on other. I need it for a g925t that is stuck on samsung logo after odin restore and showing in download mode SW rev. check fail. device:2 binari 1 , and I think by flashing with a pit might fix it
onlineunlocks said:
Thank you for the reply; by adb I know does not work without root as I looked over those methods. But there is also Heimdall that should be able to extract the pit while in download mode and has the option to save it,but seems not supporting this device. Also odin performs this tasks " Get PIT for mapping.." ,but does it automatically and there is no option to save from a working device with same details to use on other. I need it for a g925t that is stuck on samsung logo after odin restore and showing in download mode SW rev. check fail. device:2 binari 1 , and I think by flashing with a pit might fix it
Click to expand...
Click to collapse
Let us know if this worked. I need to restore back to 5.0.2 also from 5.1.1. Thanks
will not work to restore to 5.0.2 from what I know and might also damage it,so do not recommend to try that
onlineunlocks said:
Thank you for the reply; by adb I know does not work without root as I looked over those methods. But there is also Heimdall that should be able to extract the pit while in download mode and has the option to save it,but seems not supporting this device. Also odin performs this tasks " Get PIT for mapping.." ,but does it automatically and there is no option to save from a working device with same details to use on other. I need it for a g925t that is stuck on samsung logo after odin restore and showing in download mode SW rev. check fail. device:2 binari 1 , and I think by flashing with a pit might fix it
Click to expand...
Click to collapse
I'm in the same situation.
Have you found a solution?
Aou said:
According to: http://www.droidviews.com/how-to-extract-pit-file-from-samsung-galaxy-devices/
This means that, unless someone gets it directly from Samsung somehow (leak, release, or otherwise), you'll need to wait for root on the 5.1.1 stock ROM.
I don't know a whole lot about the PIT file, and why someone would ever need it (apart from screwing around so much that you overwrite your partition information on the device... which would be hard for the average user to accidentally do).
Have you tried Samsung Smart-Switch? I don't know if it's capable, but it might download the PIT info from the internet before restoring stock firmware on a 100% borked device.
Click to expand...
Click to collapse
is this gonna fix my phone if efs is not mounted??? me and my buddy have no idea how he broke his phone.
Samsung Galaxy tab pro SM t525
Error while trying to flash Firmware
no pit file
Pls see Pictures
Ps help
PS: I was able to install TWRP
but I don't Know HoTo get further
Witzker said:
Samsung Galaxy tab pro SM t525
Error while trying to flash Firmware
no pit file
Pls see Pictures
Ps help
PS: I was able to install TWRP
but I don't Know HoTo get further
Click to expand...
Click to collapse
I've the same problem now,
have solved the problem?
Thanks
alonzimanuel said:
I've the same problem now,
have solved the problem?
Thanks
Click to expand...
Click to collapse
Afaik you need the multiple! part stock file for this:
The pit file is inside the CSC stock file and can be extracted by ->
delete .md5 from the extension
open the remaing CSC......tar file
copy pit to desktop
When in Odin give it the place where the pit file is and check "repartiton".
bmwdroid said:
Afaik you need the multiple! part stock file for this:
The pit file is inside the CSC stock file and can be extracted by ->
delete .md5 from the extension
open the remaing CSC......tar file
copy pit to desktop
When in Odin give it the place where the pit file is and check "repartiton".
Click to expand...
Click to collapse
Really thanks to you!
alonzimanuel said:
Really thanks to you!
Click to expand...
Click to collapse
I hope it helps.
Please keep us updated
btw. Idk if windows can open tar files as I do all preparations in Linux before using Odin in Windows.