[Q] [Q/A] - 3G Mobile Hotspot and tethering - Droid Incredible Q&A, Help & Troubleshooting

I know this thread is repeated here and there but I am posting here because I do not feel that any of those properly describe how to do it. I tried this trick off and on several times without success and finally just got it to work today using the steps below.
FYI - I have root access and have not tested this without root. Also, I am running SkyRaider's Sense ROM.
1. Dial ##778
1.A If dialing ##778 does not work (like me) then create a new contact whose phone number is ##778 and then call that contact.
2. Choose Edit Mode - the password is 000000 - six zero's.
3. Go to 'Security'
4. Choose S.IP DUN User name
5. Change the value from yourvzwnumber at dun dot vzw3g dot com to yourvzwnumber at vzw3g dot com
6. Press the menu button and select Commit Modifications.
7. Let the phone reboot itself.
8. One the phone has rebooted itself repeat steps 1 and 2.
9. Now that you are back in edit mode choose M.IP Default Profile
10. Change the value from yourvzwnumber at dun dot vzw3g dot com to yourvzwnumber at vzw3g dot com
11. Press the menu button and select Commit Modifications.
12. Let the phone reboot itself.
Now you should be able to use the 3G Mobile Hotspot.
I could not post this thread without removing the at and dot characters in my post.

Related

Got settings for T-mobile UK anyone fancy making a cab?

Got my new Vario2 (Hermes yesterday) Straight backonto the forum after a long departure and instantly started playing with Mobile6 thanks to all the fantastic programmers on here. Only issue was having to reload al the gprs and mms data each time. After a long search on the tmobile site I found the following instructions for the UK network.
If anyone with the know how wishes to make a cab that can be installed easily each time I re-flash that would be highly appreciated and I'm sure some others will find it of use too.
Thank you in advance to any takers
How to configure Picture Messaging on your T-Mobile MDA VarioII
Setting up your connection
1. Select the Start menu and then Settings
2. Select the Connections tab
3. Select the Connections icon
4. Select the Advanced tab
5. Tap on Select Networks
6. select the button New… .immediately beneath the network drop down box and
follow the remaining instructions below to set up an internet connection
7. In the box Enter a name for these settings enter T-Mobile Internet
8. Select the Modem tab
9. Select New
10. In the box Enter a name for the connection enter T-Mobile Internet
11. Under the second drop down list Select a modem select Cellular Line (GPRS)
12. Select Next
13. In the box under Access point name enter general.t-mobile.uk
14. Select Next
15. In the box Username – leave blank
16. In the box Password – leave blank
17. Select Finish
18. Select ok three times
19. Tap on x to close the Settings screen
Setting up your Picture Messaging profile
1. Select the Start menu and then Messages.
2. Select Messaging
3. Select Menu and Tools then select Options
4. Tap on MMS
5. Tap on the Servers tab.
6. Tap on New.
7. In the box Server name enter T-Mobile MMS
8. In the box Gateway enter 149.254.201.135
9. In the box Port number enter 8080
10. In the box Server address enter http://mmsc.t-mobile.co.uk:8002
11. Select the Connect via drop down list and select your internet profile (T-Mobile Internet or T-Mobile GPRS
(Web))
12. Select the WAP Version drop down list and select WAP 2.0
13. Select OK
14. With T-Mobile MMS highlighted, tap on Set As Default
15. Select ok
Your phone is now ready to send picture messages.
PLEASE search the forums, there is a program in progress (very nearly finished) which will apply the settings for ANY network. You will find the thread here.

wm 6.1 and the uk

ive lost a weekend messing around with these different roms and although they look and run realy nice, untill one of you genius's make a rom for the tmobile mda mail im going to have to go back to my [email protected] tmobile 6.0 rom.
issues with email trying to use wifi, when these phones have no wifi!
issues with keypad mapping
and even after messing with settings and trying various cab files still no mms working.
there must be a uk guru out there??
Which ROMS have you tried?
I do not think I am understanding what you are saying. The T-mobile Dash/Excalibur has wifi, and wifi works in all of the ROMS i have tried including the stock t-mobile one.
You may have to configure some options in regard to internet/data and mms. Have you done any configuration under the Settings -> Connections -> GPRS menu? Each time you flash your phone, you have to reconfigure these settings.
Anyhow, I am not sure what you mean by the "tmobile mda mail." If this is a completely different device then the T-mobile Dash/Excalibur, then you have posted in the wrong forum; and I am surprised any of the ROMs on this forum even installed in the first place!
ive tried kavana 080307 and 080308.
tmobile mda mail has NO wifi! its like the dash in every way except this. tmobile uk must be tight wads.
subsequently email tries with gprs for a few seconds then goes to try wifi (get double arrow symbol in top right) then unsupprisingly no email.
i have configured gprs and internet explorer works (quite well infact).
http://www.manuals.t-mobile.co.uk/manual.asp?manualid=1866
That is bizzare. Is it possible to cook a ROM without wifi drivers? Sombody in the 6.1 thread said that they got their wing to work with it, perhaps they just dont use it for e-mail then. Do any of the other roms work with email? It would be a shame to have to downgrade to the stock tmobile ROM.
tell me about it, i can live without mms but not without email
In the meantime, you should try this:
http://forum.xda-developers.com/showthread.php?t=354126
If you need help installing, just give me a shout It can be a real pain for the first time without the nice wizard that comes with the new 6.1 ROMs.
NorseLaQuet said:
In the meantime, you should try this:
http://forum.xda-developers.com/showthread.php?t=354126
If you need help installing, just give me a shout It can be a real pain for the first time without the nice wizard that comes with the new 6.1 ROMs.
Click to expand...
Click to collapse
cheers mate your a star, quite a few pages reading there tough so here goes
along with this-----UK settings----
Setting up your connection
1. Select the Start menu
2. Scroll to and select More…
3. Scroll to and select Settings
4. Scroll to and More…
5. Scroll to and select Data Connections
6. Pushing the joystick left or right, scroll through the profiles listed under Internet connection
 If you see the profile T-Mobile Internet or T-Mobile GPRS (Web) listed, leave either one displayed in the
box then press Home to return to the main menu. You now need to skip the next steps and go to the
instructions Setting up your Picture Messaging profile below.
 If neither are listed, select Menu and follow the remaining instructions below to set up an internet
connection
7. Select Edit Connections
8. Scroll to and select GPRS Connections
9. Select Menu.
10. Scroll to and select Add
11. In the box Description enter T-Mobile Internet
12. Scroll to and select Connects to
13. Scroll to and select MMS Network
14. Scroll to Access point and enter general.t-mobile.uk
15. Scroll to User name and leave blank
16. Scroll to Password and leave blank
17. Select Done
18. Press the Home key
Setting up your Picture Messaging profile
1. Select the Start menu
2. Scroll and select More
3. Scroll to and select Configurations
4. Scroll to and select MMS Settings
5. Select Menu
6. Select MMSC Settings
7. Press Menu
8. Select New
9. In the Name field enter T-Mobile MMS
10. Scroll to MMSC URL and enter http://mmsc.t-mobile.co.uk:8002
11. Scroll to WAP Gateway and enter 149.254.201.135
12. Scroll to Port and enter 8080
13. Scroll to and select Connect via
14. Pushing the joystick left or right scroll to and select The Internet
15. Select Done
16. Scroll to T-Mobile MMS
17. Press Menu
18. Scroll to and select Set as Default
19. Press the Home key
Your phone is now ready to send picture messages.
I've tried the above settings for my Dash which I'm using in the UK and still no luck
i used these setting first, then modded them with the above
cheers burnsey but I get an error copying the file. Its connected via active sync and I'm using the most recent htc rom.
No idea why
EDIT - installed on reboot, GPRS & MMS seem to be working at last.

Optus settings/ROM for HTC Touch Diamond

Having problems getting on the internet. Does anyone have an Optus ROM or the settings required to get this phone working on the net....thanks Hugh
perthbar said:
Having problems getting on the internet. Does anyone have an Optus ROM or the settings required to get this phone working on the net....thanks Hugh
Click to expand...
Click to collapse
enable auto config... under settings connection / advanced network...
mine works without any extra settings...
but i'm sure gprs /3g settings are on optus' mobile homepage
Hi
I experienced a similar problem with my Diamond I purchased on the weekend. It was a Telstra NextG model that was supposedly unlocked and able to work on all networks.
It worked with my Optus SIM as a phone but I couldn't get any Internet connectivity.
I ended up flashing it to a cooked ROM which auto-detected the Optus SIM on first boot and configured itself automatically. Internet is now working without problem.
FYI I'm now using "Dia Druitt v05" ROM and am very happy with it. Original ROM version was 1.38.
Battery life is not great but I have just changed the radio from .06 to .bs14 and will see if that makes any difference.
Cheers
Loki
loki429 said:
Hi
I experienced a similar problem with my Diamond I purchased on the weekend. It was a Telstra NextG model that was supposedly unlocked and able to work on all networks.
It worked with my Optus SIM as a phone but I couldn't get any Internet connectivity.
I ended up flashing it to a cooked ROM which auto-detected the Optus SIM on first boot and configured itself automatically. Internet is now working without problem.
FYI I'm now using "Dia Druitt v05" ROM and am very happy with it. Original ROM version was 1.38.
Battery life is not great but I have just changed the radio from .06 to .bs14 and will see if that makes any difference.
Cheers
Loki
Click to expand...
Click to collapse
HI Loki
Can you explain how you did this by Dia Druitt v05 ROM...I have the same problem...I can call and SMS but now internet activity / MMS...dont know what to change on the phone...thanks for your help
You should be able to download the optus/vodafone rom from HTC using the Telstra Next G diamond serial without any issues.
Otherwise, here are the steps to manually input them:
For Internet:
1. Tap on the Start button.
2. Tap on Settings.
3. Tap on Connections.
4. Tap on the Connections Icon.
5. Tap on Add a new modem connection under My Work Network.
6. Enter Optus WEB in the Enter a name for the connection field.
7. Select Cellular Line (GPRS) in the drop down list of Select a modem.
8. Tap Next.
9. Enter internet in the Access point name field.
10. Tap Next.
11. Enter in the User name field or otherwise leave it blank.
12. Enter in the Password field or otherwise leave it blank.
13. Tap Advanced.
14. Select Use server-assigned IP address.
15. Tap OK.
16. Tap Finish.
for some pdas it is compulsary to set proxy for internet connetion if so in step 9 instead of "internet" put "wap.optus.net.au" and for proxy setting put "202.139.83.152" and port "8070".
For MMS:
1. Tap on the Start button.
2. Tap on Settings.
3. Tap on Connections.
4. Tap on the Connections icon.
5. Under My ISP, tap on Add a new modem connection.
6. Enter Optus MMS in the Enter a name for the connection field.
7. Select Cellular Line (GPRS, 3G) in the drop down list of Select a modem.
8. Tap on Next.
9. Enter mms in the Access point name field. Tap on Next.
10. Enter in the User name field.
11. Enter in the Password field.
12. Tap Advanced.
13. Select Use server-assigned IP address. Tap OK.
14. Tap Finish.
15. Tap OK.
16. Tap on Settings.
17. Tap on Messaging.
18. Tap on Menu which is located at the bottom right corner.
19. Tap on MMS Configuration.
20. Under Servers, tap on New.
21. Enter Optus MMS in the Server name field.
22. Enter 61.88.190.10 in the Gateway field.
23. Enter 9201 or Permanent, non-secure in the Port number field.
24. Enter http://mmsc.optus.com.au:8002 in the Server Address field.
25. Select My ISP in the Connect via drop down selection.
26. Select WAP 2.0 in the WAP Version drop down selection.
27. Tap on OK.
28. Tap on Set As Default.
29. Tap OK.
If setting above doesnt work change the port address on step 23 to "8070" then try again.
PS. I just did a search on google for "Optus MMS settings" and copied and paste those instructions.
Optus Rom Update
I've got the same problem. My Touch Diamond is from Telstra, but I'm with Optus. I can send/recieve sms, but not mms.
Can someone post up the latest rom for Optus users? I can'd download it from the HTC website as the serial number on the phone will only download the Telstra one.
Hey guys, I'm really sorry to bring this up again (after all this time) but I'm having issues getting the optus mms to work and I can't for the life of my work out why. I'd tried using all the suggested settings and it still refuses to work (the mobile internet is and has been working flawlessly for some time now).
I was just wondering if any of you guys actually managed to get the mms working or if you all just ended up flashing with a cooked rom.

[Q] evo4g on energy jan11 rom no data connection after sprint tech support

Hi folksi flashed energy jan 11 rom succesfully on first try then noticed no voicemail app or notification funtioning called sprint support they made me enter # codes ...still no voicemail and NOW no data connection(no 3g) ony wifi
please help me folks i wiped everything using recovery should i also format sd?
karmakid
Most roms don't come with a voicemail app.
If you have no 3g, that's a separate problem. Try updating PRL and Profile, if that doesnt work, call sprint and have then reprovision the phone. It will basically re-activate it. Don't mention that you are rooted or running a custom rom.
I may be mistaken, but I've seen people here on xda mention that you should be unrooted to activate the phone. I would at least flash a ROM that allows EPST and updating of the profile. Again, I'm no authority.
I'm guessing that they made you do a hands-free provisioning. Let's try this.
Look up MiseryInMotion's Barebones, thread. Find the download link in the OP for the odex one and download. Don't extract or anything
When the download is finished, mount as MS again. Transfer to your phone.
Transfer done? Unmount and navigate to the Wipe menu.
Wipe everything except for SD card. Twice. Believe me. Do it every time you flash a ROM.
Navigate to "Flash zip from sdcard" and find the Barebones .zip. Select with power button.
You are now flashing your first custom ROM, congratulations!
Let it sit there until it finishes. Then get back to the main menu and "Reboot system now".
Let your phone sit for a couple minutes. Skip sign-in. Reboot.
First, go to Settings - System Updates - and update PRL.Once that finishes, reboot.
Go to Market and get MSL Reader. Open the app. If it asks for "Superuser Privileges" then accept. It will tell you a 6-digit code. This code is unique to your phone. Write it down, but you can always get it again.
Go to Phone (Dial ##3282#, Choose edit mode) and enter your MSL code
select Data Profile
Hit the menu button and choose restore.
Just sit there, your phone should reboot. If it doesn't, then hold the power button and reboot.
Your phone should do "Hands-Free Provision". Once it says your phone has been provisioned, hit "Okay".
Once it starts to check for PRL update, hit cancel.
Turn on 4G, give it time to turn on (it doesn't need to connect)
Go to Phone (Dial ##3282#, Choose edit mode) and enter your MSL code. Select Advanced, scroll down to RTSP Proxy Port and HTTP PD Proxy Port. Click on them, set them to 0 (zero).
Set RTSP Proxy Address and HTTP PD Proxy Address to 0.0.0.0
Go back to the main menu of EPST and select Wimax
Find EntryRX and click on it
Change value from -89 to -110. Hit "Okay"
Hit the menu button and "Commit Changes" or "Commit Modifications". Your phone will reboot.
Go to Settings - System Updates - and Update Profile.
Once it finishes, reboot

MetroPCS for Epic 4G Data Issue

Hi Guys I have not been able to enable data on my Epic 4G, calls, text function properly the only issue is data it just doesn't work. What can Fix it? Any help? Thanks
Wrong section
Sent from my SPH-D700 using XDA
Sorry, I forgot. Well I think I found the fix, It may help some people
Fixing Data Service
1- Download QPST
2- Get your own SPC Number Click Here & Enter Your MEID. That will be your key to unlock the phone and your password. Your MEID could be found at Settings->About Phone->Status ... it's all numbers
3- Got to Start-->All Programs-->QPST-->QPST Configuration.
4- Select your phone from the list (the phone should be in Debug Mode).
5- If you don't see your phone Click on "Add New Port" uncheck "Show Serial ....blablabla" and select the port and add it.
6- With your phone selected go to Start Clients-->Service Programing. Select the phone and click OK.
7- If a dialog came up telling you to retry click on retry.
8- Click on "Read from Phone" you will be asked for your SPC number to unlock the phone and get its information.
**** BE REALLY CAREFUL AFTER THIS POINT YOU COULD MISS-UP YOUR SERVICE AND FLASHING YOUR PHONE WILL NOT RESTORE THESE SETTING... SO TAKE EXTRA CARE FROM THIS POINT ON***
9- Go to M.IP tab and select profile 0 and edit your user name remove the "aaak." just for the first row.
10- Go to PPP Config-->Um change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
11- Go to PPP Config-->An change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
12- M.IP tab change the mobile ip behavior to: simple IP only (thanks to oscarher4)
Write to Phone (the phone should restart by itself)
13- Download "Network" Click Here, and install it.
14- Turn off your WiFi
15- Run the App and in the "Set preferred network type:" Select CDMA auto (PRL). Tap Turn off radio wait about 5 seconds and turn radio ON.
16-Make Sure Toggle DNS check is "Allowed"
Full Thread
http://androidforums.com/admire-all-things-root/454073-regarding-2-3-6-update-metropcs-solved.html
4g data connected but not able to surf the net
tichs said:
Sorry, I forgot. Well I think I found the fix, It may help some people
Fixing Data Service
1- Download QPST
2- Get your own SPC Number Click Here & Enter Your MEID. That will be your key to unlock the phone and your password. Your MEID could be found at Settings->About Phone->Status ... it's all numbers
3- Got to Start-->All Programs-->QPST-->QPST Configuration.
4- Select your phone from the list (the phone should be in Debug Mode).
5- If you don't see your phone Click on "Add New Port" uncheck "Show Serial ....blablabla" and select the port and add it.
6- With your phone selected go to Start Clients-->Service Programing. Select the phone and click OK.
7- If a dialog came up telling you to retry click on retry.
8- Click on "Read from Phone" you will be asked for your SPC number to unlock the phone and get its information.
**** BE REALLY CAREFUL AFTER THIS POINT YOU COULD MISS-UP YOUR SERVICE AND FLASHING YOUR PHONE WILL NOT RESTORE THESE SETTING... SO TAKE EXTRA CARE FROM THIS POINT ON***
9- Go to M.IP tab and select profile 0 and edit your user name remove the "aaak." just for the first row.
10- Go to PPP Config-->Um change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
11- Go to PPP Config-->An change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
12- M.IP tab change the mobile ip behavior to: simple IP only (thanks to oscarher4)
Write to Phone (the phone should restart by itself)
13- Download "Network" Click Here, and install it.
14- Turn off your WiFi
15- Run the App and in the "Set preferred network type:" Select CDMA auto (PRL). Tap Turn off radio wait about 5 seconds and turn radio ON.
16-Make Sure Toggle DNS check is "Allowed"
Full Thread
http://androidforums.com/admire-all-things-root/454073-regarding-2-3-6-update-metropcs-solved.html
Click to expand...
Click to collapse
Where I can get this app "Network"?
Some of those steps are placebo, and unnecessary. That will only get you 1x internet, and dependent on your location you may/may never get 3g to work they've been blocking off more cities from flashed phones from getting 3g..
Sent from my SPH-D700 using xda premium

Categories

Resources