I'm trying to make a static boot animation, so it's the same as my splash...
Here's what I've got so far, can anyone tell me what I'm doing wrong? http://drp.ly/1rghdj
desc.txt has been set to 320 480 - same as png size
I've tried several FPSs to no avail
I've tried just a sing png in each folder, names 00001.png & 00002.png
AdrianK said:
I'm trying to make a static boot animation, so it's the same as my splash...
Here's what I've got so far, can anyone tell me what I'm doing wrong? http://drp.ly/1rghdj
desc.txt has been set to 320 480 - same as png size
I've tried several FPSs to no avail
I've tried just a sing png in each folder, names 00001.png & 00002.png
Click to expand...
Click to collapse
Here ya go. I just changed the file names along with the fps & rezipped it. I pushed it to /data/local/ & it seemed to work on my G1. I uploaded it to Mediafire. http://www.mediafire.com/file/w34znomyqcew317/bootanimation.zip
Houka420 said:
Here ya go. I just changed the file names along with the fps & rezipped it. I pushed it to /data/local/ & it seemed to work on my G1. I uploaded it to Mediafire. http://www.mediafire.com/file/w34znomyqcew317/bootanimation.zip
Click to expand...
Click to collapse
You are immense, thank you!!
I'll try removing redundant frames...
It's just a shame that there's a gap between splash1 (no splash 2 on Magic) and bootanim and then another short gap before the lockscreen, which I'm sure weren't there with the default bootanim :-S
AdrianK said:
You are immense, thank you!!
I'll try removing redundant frames...
It's just a shame that there's a gap between splash1 (no splash 2 on Magic) and bootanim and then another short gap before the lockscreen, which I'm sure weren't there with the default bootanim :-S
Click to expand...
Click to collapse
I rezipped it into 1 part so it may help with the transition between the two, maybe. http://www.mediafire.com/?sharekey=...d080c3eaa17387ec8683d6900f2d967ba1a25e8978010
Thanks for checking in, ok I opened the bootanimation-orig.zip with 7-Zip and copied out the part0 folder, changed each png to be black and white. Then dropped the files back in 7-Zip (it was named bootanimation.zip then) and then took that zip and put it in system/media folder in the theme I flashed. Basically Bionix 4.1
My phone boots fine, but the boot animation doesn't show anything. I just had a blank screen (seemingly) ... I was thinking maybe the whites aren't white enough?
Could someone take a peak, attached with the orig file and my bootanimation.zip that resulted in my edits.
Thanks a ton!!
I've run into this before - the solution, I've found, is to set the compression level to 'store'. It didn't seem to work any other way.
k0nane said:
I've run into this before - the solution, I've found, is to set the compression level to 'store'. It didn't seem to work any other way.
Click to expand...
Click to collapse
Yep that was it. Thanks for that!
Hi guys,
I recently rooted and S-OFF'ed my Desire. Really amazing. Everything went fine.
Really enjoying my phone more than ever before.
Now trying to flash my splash screen and boot loading screen.
I'm using Android Flasher 1.8.0 as suggested in the Noob tutorial section.
Splash screen went fine. Automatically reboots into fastboot. And flashes.
The tutorial doesn't actually doesn't go deeper into flashing the loading screen and whether or not it's supposed to automatically reboot into fastboot.
When i manually reboot into fastboot sometimes it can't find the process fastboot.exe and sometimes it can.
When it can it says it can't find my device when it's trying to flash the new loading screen. I don't understand why. Everything else i have tried works fine (except the first time i tried to S-OFF, it also said it couldn't find my device)
It did actually remove my RCmix-S loading screen. So now i only get a black screen when starting up. Everyhing still works fine though. Boots normally.
What should I do?
You cannot flash a new bootanimation with android flasher or fastboot. You have to replace the bootanimation.zip in /data/local or /system/media. You are s-off, so you can do this in os. Just use an explorer with root access (e.g. root explorer), mount /data or /system as r/w (read write) and replace the existing one with yours (but make a backup of the old before and make sure you used the correct resolution).
Okay that was kind of confusing then.
Still weird it's not recognizing my phone but is finding fastboot.exe
Anyway I got root explorer mounted /data/local and put a bootanimation.zip in the folder. It doesn't work though. Does it also have to be in /system/media
or just in one of them??
Thnx
It only has to be in /system/media.
SwiftKeyed from Oxygen with Transparent XDA App
i got a weird error trying to flash a new splash screen
"sending splash1...OKAY"
"writing splash1"...FAILED <remote not allowed>
phone is recognised in fastboot etc...
any ideas?
thanks
00mpollard said:
i got a weird error trying to flash a new splash screen
"sending splash1...OKAY"
"writing splash1"...FAILED <remote not allowed>
phone is recognised in fastboot etc...
any ideas?
thanks
Click to expand...
Click to collapse
Do not post in a thread which has nothing to do with your problem! And use the search.
I tried putting it only in /system/media and only in /data/local.
Both don't work.
My loading screen is still total black. I don't get it. What am I doing wrong. Is there some other file interfering. Do I have to delete something else....
PixelApocalypse said:
I tried putting it only in /system/media and only in /data/local.
Both don't work.
My loading screen is still total black. I don't get it. What am I doing wrong. Is there some other file interfering. Do I have to delete something else....
Click to expand...
Click to collapse
It does not have the correct resolution. It has to be 480x800.
Actually it has. I checked.
They are 480 x 800, 24 bit *.PNG. Downloaded these in the splash screen thread.
I got it sort of working now.
I renamed the zip to bootanim.zip instead of bootanimation.zip. Don't know if it should matter but now i'm getting a loading screen.
It's just text reading "Android" with a animated glow going over it.
This is not the one i put on the phone though. Not the pictures in the zip.
Is this some kind of default loading screen?
Which means it's still not working....
Which rom do you currently run? If a sense one, the bootanimation has to be in /data/local. If aosp one, it has to be in /system/media. That's the basic. Furthermore, in your bootanimation.zip has to be minimum two parts:
- one folder named part0
- one file named "desc.txt" (description file)
In the folder named part0 has to be the png files in the correct resolution (480x800x24). In the desc.txt you have to put the following ouput:
Code:
480 400 x p 1 0 part0
'480' is the width (not variable)
'800' is the height (not variable)
'x' is here just a placeholder. You have to replace with a number. This number sets the frames (your choice, what you set)
'1' is the count how often the bootanimation loops (your choice)
'0' sets the a pause (max 10 possible)
'part 0' sets the folder in which the bootanimation files are (not variable).
Source: http://android.modaco.com/topic/338...nimationzip-futurama-bender-bootanimationzip/
Woooot it's working!!
I'm using RCMixS_v2.0_A2SD+_BravoHboot which is a sense rom.
I put it in /data/local.
The animation was only 6 frames. Which was incorrect in the desc.txt.
Also using NO compression when zipping was the key.
Not knowing this is probably key to many people not getting this to work.
Maybe it's a good idea to have that tutorial be made a sticky or include it in the "Complete upgrading guide"
Thnx a lot MatDrOiD!
PixelApocalypse said:
Woooot it's working!!
I'm using RCMixS_v2.0_A2SD+_BravoHboot which is a sense rom.
I put it in /data/local.
The animation was only 6 frames. Which was incorrect in the desc.txt.
Also using NO compression when zipping was the key.
Not knowing this is probably key to many people not getting this to work.
Maybe it's a good idea to have that tutorial be made a sticky or include it in the "Complete upgrading guide"
Thnx a lot MatDrOiD!
Click to expand...
Click to collapse
No problem. And you could make very happy if you press the thanks-button.
I don't mean the splash screen when booting up, but when Sense homescreen is loading. Where is the file to be able to change it?
I have read that you have to unpack the htcsetupwizard.apk in order to change it but not 100% sure on that, never tried it.
They talk about it in this post as well, http://forum.xda-developers.com/showthread.php?t=806967
Anyone know if the Lg part of the boot animation can be disabled? I a newb, but I think it may be affecting my custom boot animation making it cut off too early. I'm on the skydragon rom. Also I set permissions to r-w-r-r on both bootanimation.zip as well as poweron.ogg. Thanks in advance for any help you can provide!
Demonic7789 said:
Anyone know if the Lg part of the boot animation can be disabled? I a newb, but I think it may be affecting my custom boot animation making it cut off too early. I'm on the skydragon rom. Also I set permissions to r-w-r-r on both bootanimation.zip as well as poweron.ogg. Thanks in advance for any help you can provide!
Click to expand...
Click to collapse
If you are talking about the screen that says powered by android at the bottom (splash screen), it's separate from the boot animation. I don't recommend disabling it. You can change your bootanimation settings in your desc.txt file. If you have multiple folders, part0, part1,.... etc.... change the p of the folder line to c and that should make your boot animation complete before going to your default screen. Here's an example of how to modify your desc.txt. The change is in BOLD:
Text to right between (....) describes each "setting" in desc.txt and are not part of the desc.txt file.
Original
1080 1920 30 (1080x1920 resolution at 30fps)
p 2 10 part0 (play,# of times to repeat, amount of frame pause, folder part)
p 3 0 part1 (play,# of times to repeat, amount of frame pause, folder part)
Changed
1080 1920 30 (1080x1920 resolution at 30fps)
p 2 10 part0 (play,# of times to repeat, amount of frame pause, folder part)
c 3 0 part1 (complete, # of times to repeat, amount of frame pause, folder part)
Hope this helps.
Thanks for info I'll try it out when I get a chance, or in the mood rather to switch it back out. I'm currently using one from one of the themes for cm12, but right now I'm on blisspop.
Sent from my LG-D851 using XDA Free mobile app
jran0880 said:
If you are talking about the screen that says powered by android at the bottom (splash screen), it's separate from the boot animation. I don't recommend disabling it. You can change your bootanimation settings in your desc.txt file. If you have multiple folders, part0, part1,.... etc.... change the p of the folder line to c and that should make your boot animation complete before going to your default screen. Here's an example of how to modify your desc.txt. The change is in BOLD:
Text to right between (....) describes each "setting" in desc.txt and are not part of the desc.txt file.
Original
1080 1920 30 (1080x1920 resolution at 30fps)
p 2 10 part0 (play,# of times to repeat, amount of frame pause, folder part)
p 3 0 part1 (play,# of times to repeat, amount of frame pause, folder part)
Changed
1080 1920 30 (1080x1920 resolution at 30fps)
p 2 10 part0 (play,# of times to repeat, amount of frame pause, folder part)
c 3 0 part1 (complete, # of times to repeat, amount of frame pause, folder part)
Hope this helps.
Click to expand...
Click to collapse
Hey tried it. It didn't even show up at all. I was using a boot animation in themes (I'm on blisspop atm) Pretty sure I've done everything right unless there are different steps than on kk?
Sent from my LG-D851 using XDA Free mobile app
Demonic7789 said:
Hey tried it. It didn't even show up at all. I was using a boot animation in themes (I'm on blisspop atm) Pretty sure I've done everything right unless there are different steps than on kk?
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry forgot to say I did switch back to the stock blisspop BA before setting it up. I didn't reboot before doing that though. Could that be the problem?
Sent from my LG-D851 using XDA Free mobile app
Is your bootanimation part of a theme you are developing? Or is it only a boot animation.zip file? If just a file, you can try and place it in /data/local/tmp and see if it supersedes the stock one. I have been having an issue getting a custom bootanimation to work on rooted stock D851, both KK and LP. If I place in /system/media or /data/local/tmp and either rename the original BA or move it to another location, when I reboot phone, it shows LG screen until boot complete. Seems to be on going issue. Wouldn't think it would affect CM based ROMs with theme engine. You may want to work it into a theme a see what happens.
jran0880 said:
Is your bootanimation part of a theme you are developing? Or is it only a boot animation.zip file? If just a file, you can try and place it in /data/local/tmp and see if it supersedes the stock one. I have been having an issue getting a custom bootanimation to work on rooted stock D851, both KK and LP. If I place in /system/media or /data/local/tmp and either rename the original BA or move it to another location, when I reboot phone, it shows LG screen until boot complete. Seems to be on going issue. Wouldn't think it would affect CM based ROMs with theme engine. You may want to work it into a theme a see what happens.
Click to expand...
Click to collapse
It's just a bootanimation.zip I ran it fine rooted on SkyDragon putting it in system/media. Aside from the issue the op was about. Could point in the right direction for working it into a theme?
Sent from my LG-D851 using XDA Free mobile app
Try placing it in /data/local/tmp and reboot. Sometimes that'll work. As for theme development, there are excellent resources here on XDA. Search theming, cm12 themeing, or similar. Also check github.com/cyngn for the latest CM12.x theme templetes and requirements.
Good luck.
jran0880 said:
Try placing it in /data/local/tmp and reboot. Sometimes that'll work. As for theme development, there are excellent resources here on XDA. Search theming, cm12 themeing, or similar. Also check github.com/cyngn for the latest CM12.x theme templetes and requirements.
Good luck.
Click to expand...
Click to collapse
Thanks I'll see if that works. Also wanted to look into making themes anyway. So win win I guess. If you don't care it'd be nice to add you to share what I come up with.
Sent from my LG-D851 using XDA Free mobile app
Definitely. I don't mind at all.
jran0880 said:
Definitely. I don't mind at all.
Click to expand...
Click to collapse
Hey would I need to edit the files usong a computer instead of like es file explorer. I decided to go rooted stock for a while. Still didn't work.
Sent from my LG-D851 using XDA Free mobile app
As long as you can extract a zip and repack it, you can change the desc.text file or any of your frames in the boot animation. Just make sure there is no compression selected when you rezip. Make sure you select "Store" for your level of compression (which is zero compression). For some reason, rthe G3 doesn't want to accept an alternate boot animation. I've tried /system/media and /data/local/tmp for storage with no luck. Usually get the splash screen until boot or sometimes a blank screen after splash screen until boot. I am probably going to try CyanogenMod or another ROM that has the CM theme engine and use my personal theme as a test to see if that works.
jran0880 said:
As long as you can extract a zip and repack it, you can change the desc.text file or any of your frames in the boot animation. Just make sure there is no compression selected when you rezip. Make sure you select "Store" for your level of compression (which is zero compression). For some reason, rthe G3 doesn't want to accept an alternate boot animation. I've tried /system/media and /data/local/tmp for storage with no luck. Usually get the splash screen until boot or sometimes a blank screen after splash screen until boot. I am probably going to try CyanogenMod or another ROM that has the CM theme engine and use my personal theme as a test to see if that works.
Click to expand...
Click to collapse
Well it working fine stock rooted. Except for not playing all the way through. I had to extract it with es to edit it. That said I had no idea what to select when I reziped it. That's probably where I screwed up.
Sent from my LG-D851 using XDA Free mobile app
Stock KK or LP? I tried both with no success in either folder. As far as it completing boot before animation completes, do you have more than 1 "part" folder? If so, make sure all "part" folders (part0, part1, part2.....) run only 1 time. Your last "part" folder should repeat, but not infinitely (do not set to 0 for loop number). If your animation is excessively long, try increasing frame rate to play faster.
Would you please walk me through the process you went through to install your animation? Also, what are your settings in "desc.txt" file? As well as the size of each image in your "part" folders? Are your images .png or .jpg? I'm wondering if maybe my image resolution is not high enough for this screen....
jran0880 said:
Stock KK or LP? I tried both with no success in either folder. As far as it completing boot before animation completes, do you have more than 1 "part" folder? If so, make sure all "part" folders (part0, part1, part2.....) run only 1 time. Your last "part" folder should repeat, but not infinitely (do not set to 0 for loop number). If your animation is excessively long, try increasing frame rate to play faster.
Would you please walk me through the process you went through to install your animation? Also, what are your settings in "desc.txt" file? As well as the size of each image in your "part" folders? Are your images .png or .jpg? I'm wondering if maybe my image resolution is not high enough for this screen....
Click to expand...
Click to collapse
I'm not to sure about what file type haven't looked as I didn't make it myself. I haven't edited the desc file yet. Also I'm stock kk. I used es file explorer with root explorer turned on copied the bootanimation to system/media, and the poweron.ogg file to system/media/sounds/ui. Set permissions to r-w-rr, and rebooted. Also if you need to find the files types you can find the boot animation I'm using here: http://forum.xda-developers.com/lg-g3/themes-apps/bootanimation-android-5-0-l-boot-t2814467
It's watch dogs by kachow I do believe.
Sent from my LG-D851 using XDA Free mobile app