Hi,
i am currently trying to tether my tp2 with my mac book. With the xda orbit i had before the tp2 this was no issue at all however i cant seem to get it to work with the tp2. Problem is that the tp2 doesn't seem to advertise its PAN functionality anymore when the devices are paired. So the macbook thinks the tp2 doesn't support PAN. Now when I use the internet sharing app on the tp2, it tries to connect to the macbook and then tells me that the macbook wouldn't support PAN and therefore the connection cannot be shared. On the xda this worked slightly different: the xda would open up a PAN when I started internet sharing. Then i told the macbook to connect to this PAN. So i have a catch-22 here. Any ideas on how I could get this to work?
thank you,
Kork
On a funny sidenote: this worked yesterday for a few minutes. I activated connection sharing on the tp2, and it asked me where to connect to, i selected the macbook, et voila... This was actually even better than on my XDA as I could connect in a single step.
Today i just get the message that the target system (my Macbook) would not support PAN and therefore no connection could be made - which is an outright lie...
Called HTC about it. They were actually clueless and recommended to hard reset the device. Well I got all the time in the world, did a hard reset, no change. This still remains not working. Has anyone a working bluetooth tethering between the TP2 and Mac OS X?
Had a nice talk with Apple Support for half an hour now. We tried the usual stuff, and the guy was very friendly and trying to help me, but the bottom line was "we do not support windows mobile phones, htc has to make it work with a Mac". This came not totally unexpected though. So back to square one, I am not yet giving up. But no tethering is a blocker...
Okay, guys we are getting closer. I digged deeper into the Bluetooth Settings of Mac OS X and found out that the PAN set up is stored in com.apple.Bluetooth.plist in /Library/Preferences on the Mac. With my old XDA paired, i got some Entry in there called PANDevices and the Device-ID of the XDA in that list. The Device-ID of my TP2 was not in there. So i manually added the Device-ID of my TP2 and guess what - Tethering Happyness . Problem is, on any reboot, the setting gets lost. So i am going to write a small script that fixes the plist file. I'm doing a bit of testing as well, to see if this is really the fix, but I'm getting close.
Seems that wasn't it either. It seems that the restart of Mac OS X's bluetooth daemon actually did the trick, the changes in the file were actually pointless. So now I got reproducible behaviour:
1. Restart Computer
- Connection sharing from TP2 to Mac doesn't work.
2. Restart the bluetooth daemon
- sudo killall -HUP blued
3. In bluetooth preferences, click Advanced and tick "Share my internet connection with other bluetooth devices"
4. Start the internet sharing application on the TP2. Now it works. You have to repeat steps 1 to 3 if you reboot your Mac.
Going to give Apple another call, as this clearly looks like some bug on Mac OSX side.
This is exactly why if I get the TP2 I will be keeping my n78 or e71 as a backup phone. With Joiku Spot it makes it so easy to tether. Actually, I wonder if there is a program like Joiku Spot that would do this.
For those who don't know, Joiku Spot makes your phone a wireless hub, and creates a wireless network which your computer can attach, thus using the internet from your phone on your computer. I have a macbook, and with Joiku Spot, i'm getting roughly 1800 download speeds on my mac when i'm tethered.
There is: http://www.joikushop.com/?action=products&mode=productDetails&product_id=265 - > WMWifiRouter.
However, having WiFI + UTMS is going to drain your battery pretty quickly, that's why i use bluetooth all the time, which makes the device last much longer. But i guess the WIFI option would be more compatible with all kinds of OSes...
Yes, but when I am tethering i generally have access to a plug outlet so i have no problem plugging my phone in while i'm using it as a wifi hot spot. I was using my e71 via bluetooth on both OS X and XP and my speeds are doubled with using wifi. bluetooth can only transfer so fast.
Well i use it a lot on train rides where you can consider yourself lucky if you got an outlet for your laptop let alone one for your mobile phone... So bluetooth is the way to go...
You could use a USB charge cable to keep your phone powered off of the laptop battery, while using WMWiFiRouter or any other similar program for your connection.
Although I guess if your trying to have all this done wirelessly, that kind of defeats the purpose.
That would be a good reason! but, TP2 supports usb charging, so that shouldn't be a problem. Then, you can plug your laptop in at work or wherever you're going!
Just read what Tecknik said, so it's about the same!
TP2 tether to macbook pro
Hello, I'm also trying to get my tp tethered to macbook. There is an option under BT in Mac to specify username and a phone number to use BT to connect to a modem, do i need to specify any of this information? OR do I just need to select to "share internet with other BT device" on the mac?
Kork said:
Seems that wasn't it either. It seems that the restart of Mac OS X's bluetooth daemon actually did the trick, the changes in the file were actually pointless. So now I got reproducible behaviour:
1. Restart Computer
- Connection sharing from TP2 to Mac doesn't work.
2. Restart the bluetooth daemon
- sudo killall -HUP blued
3. In bluetooth preferences, click Advanced and tick "Share my internet connection with other bluetooth devices"
4. Start the internet sharing application on the TP2. Now it works. You have to repeat steps 1 to 3 if you reboot your Mac.
Going to give Apple another call, as this clearly looks like some bug on Mac OSX side.
Click to expand...
Click to collapse
TP2 tether to macbook pro
HI Kork, do you know how to do the same thing but through a USB cable to tether TP to Macbookpro OSX?
Kork said:
Seems that wasn't it either. It seems that the restart of Mac OS X's bluetooth daemon actually did the trick, the changes in the file were actually pointless. So now I got reproducible behaviour:
1. Restart Computer
- Connection sharing from TP2 to Mac doesn't work.
2. Restart the bluetooth daemon
- sudo killall -HUP blued
3. In bluetooth preferences, click Advanced and tick "Share my internet connection with other bluetooth devices"
4. Start the internet sharing application on the TP2. Now it works. You have to repeat steps 1 to 3 if you reboot your Mac.
Going to give Apple another call, as this clearly looks like some bug on Mac OSX side.
Click to expand...
Click to collapse
I used to be able to tether fine about a week ago but now i'm getting the following msg:
"failed to establish internet sharing connection to remote device as it supports only network access point (nap) mode"
any thoughts? there is a bluetooth pan connection in network settings on my macbook. I've deleted it and recreated with no luck.
and "share my internet connection..." is checked in my device's advanced options from the bluetooth settings on my macbook.
fone_fanatic said:
"failed to establish internet sharing connection to remote device as it supports only network access point (nap) mode"
Click to expand...
Click to collapse
That's the message i get all the time after rebooting. You could try the steps I described above, this usually makes it work for me. Until next reboot, though.
Kork said:
There is: http://www.joikushop.com/?action=products&mode=productDetails&product_id=265 - > WMWifiRouter.
.
Click to expand...
Click to collapse
I Tether on all my MacBook/Netbook using WMWiFiRouter all the time.
Just enable Wifi on your Mac and it autodetects some PAN settings -even on the airport card. Give this app a try.
This has known to work on Tiger and Leopard. Never tried it on SnowLeopard though.
Well sounds easy enough. However isn't Wifi eating up your battery like a starving ogre?
Killing BT with Terminal worked great. I have been struggling with this problem for a couple of days now. Nice work. Very much appreciated. I am going to link to this solution from my post. I did not yet verify the failure to function after reboot but I will test that. I'd love to have a script that does this automatically.
myknyte said:
I Tether on all my MacBook/Netbook using WMWiFiRouter all the time.
Just enable Wifi on your Mac and it autodetects some PAN settings -even on the airport card. Give this app a try.
This has known to work on Tiger and Leopard. Never tried it on SnowLeopard though.
Click to expand...
Click to collapse
WMWiFiRouter eats up way too much battery, faster then the device can charge via USB (and my USB charing isn't working but thats another story)
Kork said:
That's the message i get all the time after rebooting. You could try the steps I described above, this usually makes it work for me. Until next reboot, though.
Click to expand...
Click to collapse
Thanks, worked just fine.
Is there a way we can create a script to place on the desktop so we can just open up a shortcut that will automatically do this?
The thing is I want to share the data connection of my mobile device on my Windows 7 PC.
The device has an option of internet sharing. I use the Wi-Fi to find and connect to the shared internet network but after it is connected, there is No Internet Access on the PC.
I don't know what is causing that? Although other mobile device can connect and use the shared internet.
Perhaps there's some PC settings which is not allowing to connect to the internet but I don't know what to change and where.
I have tried turning off the firewall.
It started working on its own.
I disconnected and tried connecting after some time, and again the same thing. Its connected but no internet access.
You are using W7 I guess? Did it pop up with a dialogue box saying Public/Work/Home?
Troubleshoot problems work sometimes
range152 said:
You are using W7 I guess? Did it pop up with a dialogue box saying Public/Work/Home?
Troubleshoot problems work sometimes
Click to expand...
Click to collapse
Yes, Windows 7 and it did pop up asking for the network type.
Closed per OP request.
Hi,
each time I use tethering on my Windows 7 PC it recognizes the connection as new (happens with USB and WiFi). I plug in the phone (or enable WiFi tethering) and Windows asks if this is a private connection and calls it network (or AndroidAP on WiFi). I plug it off and on again - the same happens again, Windows calls it network 2 (or AndroidAP 2). Next time network 3 etc. And with every number increase it keeps asking me, if this is a private or public connection, which is kinda annoying. My device is a GSM GNex running Stock 4.0.4. This happened with my SGS too. Any suggestions?
Lol same exact thing happens to me, it bothers me a little but is not like it hurts or affects the performance so I havent look into try to fix it
Sent from my Galaxy Nexus using xda premium
Sounds like the issue is on your PC end. Try naming your Hotspot something unique and putting PW security on it.
thx, i am using a custom name and wpa2 (no effect) but i used "androidap" in the post so that users find this thread when they want to google the issue.
Edit: I am experiencing the same behavior on my Windows 7 netbook. I tried Ubuntu on my PC - no bug here (WiFi and USB).
That is a Windows 7 fail.
This is a Win 7 issue I believe because it happens when USB tethering all 3 of my Android powered phones. I had over 150 network connections in Windows, until I found the "Merge or Delete Networks" option and was able to delete them.
Now I don't USB tether anymore. I have a datastick, and I also have a Linksys WRT54G with DDWRT flashed on it. Normally I use the datastick, but whenever I do need to tether I just fire up the wifi hotspot on my phone, the router connects, and it provides my lan with internet access.
Semi-Solution
I was having the same thing. It's just annoying, but you can remove the extra networks.
Right click on the network icon in your system tray, select "Open Network and Sharing center", click on the icon of your network, and on the resulting window there is an option to merge or delete networks (bottom left).
From here you can at least remove a load of networks!
I many a times use the wifi tethering to connect my Win7 laptop to connect to the internet. Running CM ROM.
Win7 connect to the AP right away, but shows 'Limited Connectivity'. Then it takes another minute or two before actually getting connected to the internet.
Connecting my Xoom to the same AP is instant. It seems like a Win7 issue.
Does anyone experience this issue?
hkk said:
I many a times use the wifi tethering to connect my Win7 laptop to connect to the internet. Running CM ROM.
Win7 connect to the AP right away, but shows 'Limited Connectivity'. Then it takes another minute or two before actually getting connected to the internet.
Connecting my Xoom to the same AP is instant. It seems like a Win7 issue.
Does anyone experience this issue?
Click to expand...
Click to collapse
I can't say that I've experienced this issue specifically, but I feel your pain. My guess would be an issue is with Windows 7. Try something different and see what happens. FoxFi is an easy to use WiFi tether. Worth a try if it fixes your issues.
Edit.
chrisgriner said:
I can't say that I've experienced this issue specifically, but I feel your pain. My guess would be an issue is with Windows 7. Try something different and see what happens. FoxFi is an easy to use WiFi tether. Worth a try if it fixes your issues.
Click to expand...
Click to collapse
Thanks chrisgriner. Tried FoxFi - doesn't work on JB. Looking thru the reviews, a few others also complained of it not working with JB.
hkk said:
I many a times use the wifi tethering to connect my Win7 laptop to connect to the internet. Running CM ROM.
Win7 connect to the AP right away, but shows 'Limited Connectivity'. Then it takes another minute or two before actually getting connected to the internet.
Connecting my Xoom to the same AP is instant. It seems like a Win7 issue.
Does anyone experience this issue?
Click to expand...
Click to collapse
I have had this same issue with my xoom and windows 7 laptop. My laptop always takes much longer to connect and catch up when connecting. Its probably something with how windows operates. I just deal with it.
Sent from my Galaxy Nexus using xda premium
1. Make sure to set a WPA2 password.
2. Make sure the Network type is set as PRIVATE/Home in Windows.
3. If all else fails, go to Control Panel > Network > Network Adapters and disable your wireless card/adapter and re-enable it.
Sent from my Galaxy Nexus using xda app-developers app
Smokeey said:
1. Make sure to set a WPA2 password.
2. Make sure the Network type is set as PRIVATE/Home in Windows.
3. If all else fails, go to Control Panel > Network > Network Adapters and disable your wireless card/adapter and re-enable it.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thanks smokeey, those are my settings. Sometimes, when windows fails to get Internet connectivity, clicking on troubleshooter (which sometimes disables and re enables the wireless adapter) gets it going.
Update your wireless card drivers on your laptop.
I subscribe to a tethering plan, but mobile hotspot isn't working.
Setting network security to "Open" works, but otherwise, if I use wpa or wpa2, no
client devices (a HTC one S, toshiba laptop running linux) will connect. They
just attempt to connect and give up without any type of diagnostic message.
I really hope I don't have to reset the phone to defaults after setting everything up.
thechocowarrior said:
try calling tmobile to see if its activated.
Click to expand...
Click to collapse
I do have hotspot active on the account. As I said, it works If I set the security settings to none.
Also if i put my SIM into my HTC one S, mobile hotspot works there with WPA2.
It's been really iffy for me. Sometimes it works, sometimes it doesn't. I'll connect with a laptop but have limited connectivity. Not sure if it's something on T-Mobile's end of the phone itself. Barnacle doesn't work great either.
allunix said:
I subscribe to a tethering plan, but mobile hotspot isn't working.
Setting network security to "Open" works, but otherwise, if I use wpa or wpa2, no
client devices (a HTC one S, toshiba laptop running linux) will connect. They
just attempt to connect and give up without any type of diagnostic message.
I really hope I don't have to reset the phone to defaults after setting everything up.
Click to expand...
Click to collapse
Did you add the tethered device's (i.e. your laptop) MAC address?
In TMO's stock firmware, you have to add the MAC addresses that are allowed to connect. I did not see anyway to turn this requirement off, nor did I see it documented anywhere.