Firstley im a complete newbie to the moddin world
but ad like to update my blackstone to the new TF3D 2.5
any 1 willing to give a guy sum help?
cheers
since touchflo itself is not published as cab files to simply install, you need to flash a rom that comes with the version you like. you'll find different roms here: http://forum.xda-developers.com/forumdisplay.php?f=453
and a tutorial on how to flash roms can be found here: http://forum.xda-developers.com/showthread.php?t=505377
also, as a beginner, you should check out the blackstone wiki
Related
Hi I have a Kaiser and I can pimp it fine, however looking briefly on the Artmeis section my friend has asked to upgrad hi windows 5 to windows 6.1.
Do I..a) just install the rom in the upgrades section i.e cube version
or..b) is there something I have to install first before doing a rom upgrade.
i.e on the kaiser I had to install Hard-SPL before upgrading, is there something similar that needs to be done..
If the above 2 steps need to be done or just one step can someone please send me a link to those relavent files....I think the title and question put accross is a worthwhile thread for newbies and they can pick it up easily if all the information is replied to in this thread.
Many thanks
A hard-uspl-like program is included in Meschle's and Toms roms. Just execute step1.bat (which is USPL), reset, then step2.bat (which is the actual flasing of the rom).
have u got a link direct to these roms please, it will be like one page read up for newbies with all the info on this thread
Meschle's Touch ROM
Call me stupid, but I have searched around ALOT on this forum for an answer to my question but have yet found any relevance to what I am looking for.
I want to start cooking my own Artemis ROM's. As far as I have read the easiest way is by using something called HyperCore kitchen. Now, I've started using this, but have found out afterwards that cooked ROM's available to download on here, cannot be extracted properly so as to be able to make one of them custom for what I want.
And as there is no official WM6.1 ROM for the Artemis, I am at a loss.
Basically, what I am asking to do, is to find out how to port a Kaiser WM6.1 official ROM so that it would be usable on the Artemis. Alternatively, perhaps find out what files are required from the Kaiser ROM to make the official WM6 Artemis ROM into WM6.1.
I hope I haven't confused you all. Any help would be greatly appreciated, maybe from bepe, tom_codon, Anja, NhatHoa? Any of you guys still about these days?
90 Views and nobody else knows anything?
This is starting to bug me now
I have looked everywhere. I have used the search, the wiki, google! I can't find any reference anywhere that explains to me how I can properly make a WM6.1 ROM for my Artemis using the required 6.1 files from a Diamond ROM.
HELP!!!!!!!
Start off with a base ROM first instead of porting. Porting can get very tricky and complicated. I'm currently in the attempt of porting a ROM (for the Hermes) and let me tell you, it's not easy. If you want to know more, i can show you what i'm doing via IM (faster) or here.
Hallo,
first I must say that I never cooked a rom so I'm a Rom-virgine
I want to edit the original 2.03 GER Rom from HTC.
I Installed XBmod Manila Rhodium but after installation there is no free Memory, so I must cook a ROM by myself. TouchFlow3D is the only thing I want to change.
Can anybody give me a link to a tutorial where I can read everything about Rom-Cooking.
I nee a kitchen... which, where I can find?
Which files to edit...
I hope somebody can spend me some minutes to help a nooby ^^
Maybe "erviuskitchen" is good for cooking, i dunno...
BUT I Think you need 2100+ build 4 TF3D working properly.
musste ma gugge obs irgndwo ne anleitung gibt
On my Diamond with cab installation everything works fine.
Where can I get a 2100+ build? I need a GER version.
Go to www.htc-developers.de. It's a German forum and there you can find a kitchen with a 21042 ROM and SYS. But currently the site seems to be down ...
Check this out, it might spare you the cooking - german rom with xbmod manila - http://forum.xda-developers.com/showthread.php?t=497204
Hey, nice to see some people really trying to learn and not only: "can you do it for me?"
Here's the easiest way i found to start cooking, it's a really simple kitchen, with it you can dump any open rom and there's also a great video tutorial:
http://forum.xda-developers.com/showthread.php?t=413782
And here's i nice post by Suiller explaining a little about some Manilla OEM's, what files you will need, etc...
http://forum.xda-developers.com/showpost.php?p=3622406&postcount=2220
Good luck man! If you have problems, just pm-me and i'll do my best!
In the Diamond ROM development section, look up the thread 'noob kitchen'. It's a thread where I and a few others help(ed) each other out to get started to cooking.
I posted a link there with a few packages and my entire ROM kitchen with what I ended up with, including my RhodiumManila packages.
Drop me a note on how to get going _after_ you've done at least a few test cooks and/or reading that thread for a bit .
If you're as far that you can dump the original 2.03 HTC ROM, and remove a few things, recook it and flash it: then you're just a few steps away from adding RhodiumManila to it
Hi,
I'm new to the forum, hence would appreciate some guidance & advice. Bought the Touch HD recently, and am keen to have the very nice looking
TF3D/manila 2.5 interface that's flying arnd the forum. But don't know how to go about doing it.
Is there a step-by-step dummies guide somewhere in the forum?
Frm what I can gathered, i think i need to flash my ROM before I can do anything. I see there are so many ROMs around but which should I use?
Info abt my device .. WM6.1 Pro, CE OS 5.2.20757 (Build 20757.1.4.0).
Thanks in advance for the help.
Hello and welcome
There is indeed a superb dummies guide written by Digital Outcast here: http://forum.xda-developers.com/showthread.php?t=505377
You will need a rom with TF3D 2.5. Take a look in the rom section and decide for yourself which one to go for based on what people have said in the threads. Bare in mind you can always flash another rom if you don't like it anyway...
At the time of writing Miri's Rev7.1 and Dutty's Leo R2 are the only roms with the very latest TF3D 2.5 (sometimes referred to as 2.6 as it has a weather panel and animated weather on the home screen).
Good luck!
Edit: forgot Miri also has a WM 6.1 rom with TF3D 2.5, http://forum.xda-developers.com/showthread.php?t=547278, the two above use windows mobile 6.5
Also, an often forgotten website:
The Wiki Site
The wiki is very useful, with lots of step-by-step instructions on how to flash your ROM, add themes, flash radios, etc. Give it a shot!
There is also another 2.5 ROM from Efsane at http://forum.xda-developers.com/showthread.php?t=553888
with the latest WM 6.5 combined
hi,
i own an touchHD/blackstone with stock spanish rom. Comes with touchflo 3d 1.3. Can i update my touch flo 3d? wich version? any cab?
Searched a lot in the forum but mostly are themes for other versions of manila.
if someone can help will be amazing,
thanks in advance
glikani said:
hi,
i own an touchHD/blackstone with stock spanish rom. Comes with touchflo 3d 1.3. Can i update my touch flo 3d? wich version? any cab?
Searched a lot in the forum but mostly are themes for other versions of manila.
if someone can help will be amazing,
thanks in advance
Click to expand...
Click to collapse
You would be best served flashing a new ROM in order to upgrade TF3....and also doing some reading about what versions are available.
There is Manila 2.1 w/sense and Manila 2.5...
Read more here and see all the custom ROMS:
http://forum.xda-developers.com/forumdisplay.php?f=453
TYSM Acid
i was searching a way to update tf3d. best without flashing.
Anyway, thanks a lot for the help!
Yes there befor years i found a CAB to update only the old Touch FLO with newer version but i don`t remember where is that CAB
Also the best way to feel the diference is to flash new ROM with Latest 2.1 Sense manila
TY tsalta
Then i must think in flash my device with a new ROM.
Any recomendation? I prefer a light and fast one, i will charge with the software i like later, but prefer one with the basic OS apps, office, and the latest manila. If its possible , in spanish.
thanks all again for your help!!
The Fastes ROM from my expirience are NRG ROMs they are not very clear i mean about the APPS but have some usefull apps cooked anyway the ROM is good and fast if you want bug free rom for everyday use and all to be smooth flash NRG 21898 with manila 2.1Sense 30March version and all wil be fine.
its WW rom not Spanish.
This is if you want to have a good ROM just to flash and to go ... if you want a super super faster rom without Manila and etc.. to use it for other i mean for some UI shell then you can flash some really CLEAR rom that is without Manila without Titanium and without APPS.
+1
The cab to update Touchlfo3d is huge if I rememeber and very very very slow and laggy once installed.
Flash to EnergyRom, very quick and stable and beautiful...
TYSM to all
just one more thing... a link to an easy explained way about how to flash my device?
thanks all again and excuse my english please
Dude i already Explain a super Easy Step by STep Guide for Begginers how to Unlock the Device and how to be Able to flash a NEW ROMS
I write it already but its looking like some peoples cant READ or are to lazzy so i hope this to help you its really EASY tut that i wrote if you read it will understand what you need to do Exactly.
http://forum.xda-developers.com/showpost.php?p=6083906&postcount=19
Once you did it will see HOW EASY it is