Related
So I bought a car usb charger that claimed it was rated at 1 amp. Using both my blackberry and HTC oem usb cables it will only show up as a USB charger (500ma).
This is not exactly enough to charge the phone while using 3g, gps, full screen brightness, etc. I'm looking for a good confirmed 1 amp hardwire (not using a usb cable) car charger and home charger. I used my sisters Samsung charger (rated at 700ma) and it charged it quicker than with the OEM htc charger.
And I would like to try and get ones that are confirmed to show up as fully charging the phone. I would appreciate some insight
Sent from my PC36100 using XDA App
And now that I think about it,
I would like to be able to use my Amazon prime for a change, so amazon links would be nice
Sent from my PC36100 using XDA App
I went through a few different car chargers, so I can help you out here. I bought the Belkin car charger recommended here in another thread, low profile and rated at 1A, but my phone only recognized it as USB and charging was fairly slow, extended road trips using video recording and navigation while plugged in would drain my battery over time.
I used my friend's palm pre home charger and it worked very well, so I went on to Amazon and bought the "palm vehicle charger". The one I got in the mail (from Park Deals) was DOA, wouldn't turn on at all (I emailed Park Deals and they sent me a new replacement free of charge, didn't even have me ship back the defective one). I called the local radio shacks and found one in stock at $9.99 (radio shack isn't carrying palm anymore, so the accessories are on closeout but hard to find in stock). Works like a charm, the phone recognizes as AC charging, the phone still charges while running navi or recording video.
My friend got a cheapo car kit on ebay, came with rubberized case, mount that fits the evo with the same case on, and a cheap unlabeled car charger with a bungie type cord. I tried this on my phone, my evo recognizes it as AC also, so I assume it would charge well if it's rated at 1A. I've seen several other cheapo car chargers rated at 1A as well.
Another thread here on XDA says that if you modify your charger/cable by altering the middle data pins you can get the phone to believe the usb port is plugged into the wall and draw full current from the charger. I tried covering the two middle pins with a piece of paper and plugging it in, but this didn't work for me. The other methods involved shorting the two data pins together, I didn't really want to waste a cable or mess up a charger and potentially my phone so I just bought a different charger. Another thread mentioned buying a specific rocketfish usb cable had a similar effect.
nhutpham said:
I went through a few different car chargers, so I can help you out here. I bought the Belkin car charger recommended here in another thread, low profile and rated at 1A, but my phone only recognized it as USB and charging was fairly slow, extended road trips using video recording and navigation while plugged in would drain my battery over time.
I used my friend's palm pre home charger and it worked very well, so I went on to Amazon and bought the "palm vehicle charger". The one I got in the mail (from Park Deals) was DOA, wouldn't turn on at all (I emailed Park Deals and they sent me a new replacement free of charge, didn't even have me ship back the defective one). I called the local radio shacks and found one in stock at $9.99 (radio shack isn't carrying palm anymore, so the accessories are on closeout but hard to find in stock). Works like a charm, the phone recognizes as AC charging, the phone still charges while running navi or recording video.
My friend got a cheapo car kit on ebay, came with rubberized case, mount that fits the evo with the same case on, and a cheap unlabeled car charger with a bungie type cord. I tried this on my phone, my evo recognizes it as AC also, so I assume it would charge well if it's rated at 1A. I've seen several other cheapo car chargers rated at 1A as well.
Another thread here on XDA says that if you modify your charger/cable by altering the middle data pins you can get the phone to believe the usb port is plugged into the wall and draw full current from the charger. I tried covering the two middle pins with a piece of paper and plugging it in, but this didn't work for me. The other methods involved shorting the two data pins together, I didn't really want to waste a cable or mess up a charger and potentially my phone so I just bought a different charger. Another thread mentioned buying a specific rocketfish usb cable had a similar effect.
Click to expand...
Click to collapse
That was me on both accounts. Love my rocket fish cable. Bought the 12v/usb converter for the car and whether or not i use the pc or car to charge, it shows as ac charger on the phone. I use this cable on all my pc's as well as the usb outlet in my vehicle.
This is the charger that I bought from amazon. It shows up as charging from AC (instead of USB) charging. It's available for Amazon Prime for under $6:
The Motorola P513 micro-usb charger.
Ok so I ended up with the Moto 513 charger as well (950ma rated)
http://www.amazon.com/Motorola-Vehi..._1_5?ie=UTF8&s=wireless&qid=1280759739&sr=8-5
But I cant find any AC chargers under prime that are 1000ma
investinwaffles said:
Ok so I ended up with the Moto 513 charger as well (950ma rated)
http://www.amazon.com/Motorola-Vehi..._1_5?ie=UTF8&s=wireless&qid=1280759739&sr=8-5
But I cant find any AC chargers under prime that are 1000ma
Click to expand...
Click to collapse
this one works great. I have it.
Ok, so I found an OEM Nokia for the N97 that is rated at 1200ma. Is this safe to buy for my phone?
http://www.amazon.com/Nokia-Origina..._1_2?ie=UTF8&s=wireless&qid=1280760676&sr=8-2
Auction with more specifics of the charger:
http://cgi.ebay.com/NOKIA-US-AC-10U...ccessories&hash=item414e190fa7#ht_2800wt_1026
There's a nokia micro usb charger for $6.99 available for Amaazon Prime. The model number is AC 6U. ASIN: B0030T0ULW
I'm charging with the scosche reviveII at 2.1 amps without any problems.
linhpham2 said:
There's a nokia micro usb charger for $6.99 available for Amaazon Prime. The model number is AC 6U. ASIN: B0030T0ULW
Click to expand...
Click to collapse
From this ebay listing it looks like the AC-6U is only a ~600ma charger:
http://cgi.ebay.com/NOKIA-CELL-PHON..._Accessories&hash=item5639f88b1c#ht_500wt_721
I think ill spend the extra few bucks on the 1200ma charger, I don't think ill have any problems (and i have the best buy warranty also so I'm not too worried).
linhpham2 said:
I'm charging with the scosche reviveII at 2.1 amps without any problems.
Click to expand...
Click to collapse
How fast does it charge?
One the 2.1 amp port, the Evo only charges at 1 amp. The Evo doesn't charge any faster with this charger than any other 1 amp charger.
linhpham2 said:
One the 2.1 amp port, the Evo only charges at 1 amp. The Evo doesn't charge any faster with this charger than any other 1 amp charger.
Click to expand...
Click to collapse
Gotcha, thanks for the info.
I just ordered a Rocketfish cable. We'll see how that works.
Would be nice if they made a Y-cable to get 1amp from 2 USB ports in a PC. I mean, I know they MAKE cables like this but I read somewhere that HTC phones were designed to still only charge at 500mAh even with one of those.
Dunno.
It depends on what you're using as a charging source. When usb charging on my home pc or car, it's AC charging at 1 amp.. But if I'm charging with my Energizer external battery, it's only USB charging at 0.5 amp. This is using the same usb cable.
iGo
Would anyone happen to know what an iGo tip (A97) delivers? I am trying to rig up a custom solution that is hard-wired, but uses iGo tips so I don't have to use the cigarette lighter plug and I have the flexibility at the corner of my windshield to swap tips for different devices.
Right now, I have a 4-port USB hub installed under the dash that is 12v powered. I then use a proprietary iGo cable that uses a standard PC style USB connector on one end and then terminates into an iGo tip connector at the other end. That USB cable runs up to the corner of the windshield so I can swap tips at will.
If I use the iGo A97 tip on their cigarette lighter adapter, it seems to charge, but I am not sure at what rate. If I try to use the A97 tip on the USB hub, it charges for about 2 seconds, and then the light goes out. The Evo does not seem to like the custom arrangement, yet all my other micro usb devices do not seem to have any issues and charge just fine...
Thanks,
-Rob
I can attest to the Moto 513 working fine - it has served me very well on my Evo and the Treo Pro before it.
Unfortunately it is a big ass charger though - wish there was a good micro option.
How do u determine how much power its actually charging at or if its not using the full 1amp rating?
_______________________________
Sent from my EVO 4G
robroy90 said:
Would anyone happen to know what an iGo tip (A97) delivers? I am trying to rig up a custom solution that is hard-wired, but uses iGo tips so I don't have to use the cigarette lighter plug and I have the flexibility at the corner of my windshield to swap tips for different devices.
Right now, I have a 4-port USB hub installed under the dash that is 12v powered. I then use a proprietary iGo cable that uses a standard PC style USB connector on one end and then terminates into an iGo tip connector at the other end. That USB cable runs up to the corner of the windshield so I can swap tips at will.
If I use the iGo A97 tip on their cigarette lighter adapter, it seems to charge, but I am not sure at what rate. If I try to use the A97 tip on the USB hub, it charges for about 2 seconds, and then the light goes out. The Evo does not seem to like the custom arrangement, yet all my other micro usb devices do not seem to have any issues and charge just fine...
Thanks,
-Rob
Click to expand...
Click to collapse
Should pull 1A off the Igo
how do i determine if its recognizing a charger as ac versus usb? could this be rom specific? it seems to charge much faster with cyanogen than it did with damagecontrol
I have been on the hunt for a charger for my car and home that shows up as an AC charger so that I can get a faster charge. After a bit of tinkering I have found that all you need to do to get ANY charger to show up as a AC charger is to have 5V on the standard USB + & - leads and simply connect the two data wires together. This will tell the phone that this is an AC adaptor.
I actually bought a cheapo 1A USB car charger from DealExtreme and it was supposed to show up as an AC adaptor but it didn't. So I carefully opened it up and de-soldered the resistors that were connected to the data pins on the PCB and verified that there were no more connections going to the two data pins on the USB connector (the two middle pins) and then put a small dab of solder across them. I plugged my MonoPrice USB cable into it and went to my car. Lo and behold it shows up as an AC adaptor AND actually charges at the full 1 AMP capacity!
Just wanted to share this with you guys. If people want to send me their chargers I would be happy to mod them for you (just pay shipping). I was also thinking about picking up a bunch of the USB 1A car chargers from DealExtreme, modding them, and then re-selling them. Would anyone be interested?
houseofbugs said:
I have been on the hunt for a charger for my car and home that shows up as an AC charger so that I can get a faster charge. After a bit of tinkering I have found that all you need to do to get ANY charger to show up as a AC charger is to have 5V on the standard USB + & - leads and simply connect the two data wires together. This will tell the phone that this is an AC adaptor.
I actually bought a cheapo 1A USB car charger from DealExtreme and it was supposed to show up as an AC adaptor but it didn't. So I carefully opened it up and de-soldered the resistors that were connected to the data pins on the PCB and verified that there were no more connections going to the two data pins on the USB connector (the two middle pins) and then put a small dab of solder across them. I plugged my MonoPrice USB cable into it and went to my car. Lo and behold it shows up as an AC adaptor AND actually charges at the full 1 AMP capacity!
Just wanted to share this with you guys. If people want to send me their chargers I would be happy to mod them for you (just pay shipping). I was also thinking about picking up a bunch of the USB 1A car chargers from DealExtreme, modding them, and then re-selling them. Would anyone be interested?
Click to expand...
Click to collapse
Thanks for the post! I just wanted to add to it a link which includes some more information about performing this "mod." I haven't done mine yet, but I intend to soon.
http://forum.xda-developers.com/showthread.php?t=767961
Sb22 said:
Thanks for the post! I just wanted to add to it a link which includes some more information about performing this "mod." I haven't done mine yet, but I intend to soon.
http://forum.xda-developers.com/showthread.php?t=767961
Click to expand...
Click to collapse
Thanks for that link! I didn't know if anyone else tried this yet. But I can verify that it works perfectly! The best part is that my car charger looks stock as I used 2-part epoxy to glue it back together.
i have said it before and i will say it agai , fast full 1amp charges a bad for your battery and do not allow proper charges this you get **** for battery life.
nice mods but not good for battery life
Sent from my PC36100 using XDA App
v_lestat said:
i have said it before and i will say it again , fast full 1amp charges are bad for your battery and do not allow proper charges. you get **** for battery life.
Click to expand...
Click to collapse
i heard you say that before, and i thought you were full of crap. after trying it for several charge cycles, it is plain as day. your battery charge WILL last longer from a slow usb half amp charge. seriously.
sometimes, however, it isn't worth waiting for. in a "non-primary" charging location such as a car, I can see the benefit in catching a quicker "top-off" charge.
I know your post is old, but THANK YOU MAN !!, i was having trouble obtaining only 100mAh from a AA-battery portable charger, modded a cable and now it's working so fine !!
Hmm, I could probably modify one of my short USB extension cables and cut off the data pins and keep that cable somewhere for cases where i'd prefer the turbo charge... Just snap on this usb extension cable (or maybe even an adapter) and boom you're getting the 1A charge
PS: my old WinXP box actually complains and shuts off the usb port if it sucks more than usual 500 mA, you would need to solder two usb connectors in parallel to fix that
So I want a fast charging car charger that is also a wall charger. I have read some threads on here stating the following:
alphadog00 said:
Unless the charger or the cable has the data lines shorted, the phone will only charge at USB rate (~500mA). Even if you have a 1A car charger, the best you will get is USB speed UNLESS you connect the data lines on the cable.
Click to expand...
Click to collapse
So how do get a cable that has the data lines shorted or what charger should I buy? Can I short the lines myself, I have a nice welding setup? I can get a $5 charger at walmart that does 500mah and has a cable (not to mention convenience).
If I can get faster charging somehow I wouldn't mind paying a little extra. This 1 amp per port, 2 port charger might be worth the trouble: http://www.gazaro.com/platinum-series-dual-port-wall-and-vehicle-charger-31106001bb
Finally I found a 2 amp incase single port charger at Best Buy for $40 but if our phone wont use the 2amps I don't want to waste the money as this one would not include the cable. http://www.jr.com/incase/pe/ICE_EC20035/
edit: found just the car charger 2 amp for $22 shipped: http://www.amazon.com/Incase-2-amp-Charger-iPad-iPhone/dp/B003IWJNJG
or ebay $7 shipped small 2amp: http://cgi.ebay.com/Apple-iPad-Mini...Accessories&hash=item45fa88cb21#ht_2044wt_952
What's everyone's opinions on the matter?
It looks like I just need to short the middle two pins D+ and D- but what is the best way to do this? On the cable itself or the car charger?
Also will I benefit from the 2 amp charger over the 1 amp?
edit: did some more reading motorola car chargers seem to be wired properly out of the box: http://www.amazon.com/gp/product/B0...eless&tag=5336653508-20&qid=1280759739&sr=8-5
wakestrong said:
It looks like I just need to short the middle two pins D+ and D- but what is the best way to do this? On the cable itself or the car charger?
Also will I benefit from the 2 amp charger over the 1 amp?
edit: did some more reading motorola car chargers seem to be wired properly out of the box: http://www.amazon.com/gp/product/B0...eless&tag=5336653508-20&qid=1280759739&sr=8-5
Click to expand...
Click to collapse
I've been using that exact Motorola car charger on my Thunderbolt with great success. It charges extremely fast.
DontCome2MyHouse said:
I've been using that exact Motorola car charger on my Thunderbolt with great success. It charges extremely fast.
Click to expand...
Click to collapse
I might buy it just because it is so cheap. I'm in the market for a car charger and was going to buy the seidio one that claims 1000mA, but since this is so cheap and boats 950mA, I think I'll go ahead and grab it.
What does everyone else think?
I was lucky enough to snag the actual Verizon one for $15. They were running 25% off and my employer bonus kicked in for another 15%.
I got a free charger from Verizon when I bought my droid and it works fine with this phone.
So far the Motorola fast charger from Amazon has worked flawlessly!
Sent from my rooted BAMF Thunderbolt!
Hi all,
I lost my charger unfortunately.
I did search around but found amazon out of stock.
Where can I buy the charger.
Thanks.
drpratik said:
Hi all,
I lost my charger unfortunately.
I did search around but found amazon out of stock.
Where can I buy the charger.
Thanks.
Click to expand...
Click to collapse
http://www.amazon.com/Motorola-SPN5...SKM8/ref=sr_1_1?ie=UTF8&qid=1312842851&sr=8-1
http://cgi.ebay.com/Car-AC-Charger-...758129?pt=PDA_Accessories&hash=item588f078a71
Thanks a lot.
ANY charger that puts out 1000mA will work with it. Motorola makes "travel" wall chargers that sometimes go on sale for a buck, and have the plug folding into them so it takes less space in a bag. As long as it has a micro-USB plug or takes your USB cable, it will work, does not have to be specific for the phone.
The whole idea of microUSB chargers is part of a larger EU plan to allow for standard chargers with microUSB tips, so you can replace your cell phone but "never" have to replace the wall wart for it.
Just check the power output, most of the Motorola chargers put out 1000mA now because some phones with big batteries (like the Atrix) can use that power to charger quickly. Lower power rating, longer charge times.
You read my mind,
It was just the info I wanted to know.
Thanks.
Bear in mind though, not all micro usb chargers work on atrix. I have a few that dont work but work fine on my other stuff. Im not sure why though. I have an external battery that worked with my nexus one but not my atrix.
I voided my warranty.
Rred said:
ANY charger that puts out 1000mA will work with it.
Click to expand...
Click to collapse
The one that comes with the phone in the US is 800ma actually. But as you said, 1000ma would charge it faster.
My atrix charger died so I'm currently using a blackberry charger with 750ma output. The iphone charger works too but it's a slower charge.
Whaddayaknow. The one supplied with my phone says 850mA, the one supplied with my bt earbud is 1000mA. Maybe someone at Motorola is paying attention to profits.<G>
But this is all part of why he industry is moving to standard chargers and why "all" standard chargers should work with standard phones. If a charger doesn't work with this phone, odds are it is too low power or simply a cheap piece of Chinese quality control which has one or more broken contacts in it.
I've gotten USB cables that have the same problem, charge or data not both. that isn't by design but at least one of the four wires in them was broken. Cheap cables is cheap cables--and I've seen cheap cables shipped as OEM from brand names.
Like cables from WD and possibly Moto that have the USB log on the wrong side of the plug--which means they are not entitled to use the logo at all, and the maker does not understand the USB spec.
If you live near a hotel, walk in and say that you left your phone charger in one of the rooms. They usually have boxes of forgotten chargers.
Thanks all for your help.
I started using lg micro USB charger which gives 700 ma.
Will get original one as well.
Thanks again.
Sent from my MB860 using Tapatalk
Go to monoprice.com and grab a dual USB / 3 port electrical outlet for like 3 bucks. Then stock up on 6-10ft micro USB cables for a buck a piece.
Sent from my MB860 using XDA Premium App
Nice idea.
Will surely check out monoprice,
Sent from my MB860 using Tapatalk
The USB wire the comes in the box was way too small for my liking, so i needed a longer wire, and I figured I might as well buy another wall outlet for travel or just for the heck of it. And I could not find a decent wire for under $5, until I came across this.
$2.28 - High-Speed WALL Power to USB Female Converter (1000mA) - White: http://www.monoprice.com/products/p...=10311&cs_id=1031106&p_id=6784&seq=1&format=2
$1.40 - 6ft USB 2.0 A Male to Micro 5pin Male 28/24AWG Cable w/ Ferrite Core (Gold Plated): http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5458&seq=1&format=2
They are out stock on the Black Wall USB plug.
The only downside was the S+H, it was $6.60. So I ordered 4 wires, and 2 plugs ($9.74). Total came to $16.34, which is not bad as I could not find anything even close on Amazon.
The combination work perfect. I have attached some pictures below. (Note: All pictures were taking with SGSII, EXCEPT the picture with the SGSII in it, that was taken with a Nexus 4G.)
Just wanted to let everyone know in case someone also wanted to buy one of these.
lucky for me i dont have to pay s&h with monoprice, they're awesome regardless though. I live 5 minutes away from their dist. center so i can just pick up
Funny thing, the 10' cable is cheaper than the 6' in OP.
Also, this phone comes with the exact charger that my Droid Charge came with, but the DC came with a much longer cable.
I've got about 5 of those same wall chargers (in black). Be careful unplugging them, as 3 of mine have all left one of the prongs in the WALL SOCKET when I unplugged them. I notified Monoprice customer service, and they're sending me replacements, but they'll be of the same design.
I hope they change the design soon, because right now both of the prongs are just held on by a piece of solder. One too many tugs and they come right out. So once you plug it in, leave it!
Thanks, I just ordered one of the 6ft cables
Awesome! Exactly what I was looking for. Got 3 cables, 1 wall charger and 1 car charger.
vikramjatt11 said:
The USB wire the comes in the box was way too small for my liking, so i needed a longer wire, and I figured I might as well buy another wall outlet for travel or just for the heck of it. And I could not find a decent wire for under $5, until I came across this.
$2.28 - High-Speed WALL Power to USB Female Converter (1000mA) - White: http://www.monoprice.com/products/p...=10311&cs_id=1031106&p_id=6784&seq=1&format=2
$1.40 - 6ft USB 2.0 A Male to Micro 5pin Male 28/24AWG Cable w/ Ferrite Core (Gold Plated): http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5458&seq=1&format=2
They are out stock on the Black Wall USB plug.
The only downside was the S+H, it was $6.60. So I ordered 4 wires, and 2 plugs ($9.74). Total came to $16.34, which is not bad as I could not find anything even close on Amazon.
The combination work perfect. I have attached some pictures below. (Note: All pictures were taking with SGSII, EXCEPT the picture with the SGSII in it, that was taken with a Nexus 4G.)
Just wanted to let everyone know in case someone also wanted to buy one of these.
Click to expand...
Click to collapse
so how much faster do you think this charges your phone
so how much faster do you think this charges your phone
Click to expand...
Click to collapse
Well considering the stock charger is also a 1000mAH... it won't be any faster.
yeah didnt think to check for myself. to much sleep depprevation.
Sorry if this is a noob question, Im coming from a blackberry so Im a bit retarded in this subject.
Are monoprice good quality cables? The supplied cable with the epic touch is just.. ridiculously short. The block.. charger.. thing is fine, I just want a longer cable! I found some longer OEM chargers as well that I was thinking of getting off Amazon.
IE:
http://www.amazon.com/Samsung-ATADU...=wireless&rps=1&ie=UTF8&qid=1316961827&sr=1-1
Either way its no big deal, just dont want to end up frying my phone because I cheaped out on cables lol.
also, for anyone looking for a car charger, ive read great things about:
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1317080917&sr=8-1
i plan on getting that myself, waiting to hear some feedback on the monoprice cables first though, otherwise ill go with the samsung oem charger i posted above
YESS, those chargers are amazing... i purchased 10 last year, when they were like $1 each... dey are so amazing, i onli broke 2 so far, n that was my fault.... dey charge the phones super fast, n love the blue light....
t0t said:
also, for anyone looking for a car charger, ive read great things about:
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1317080917&sr=8-1
i plan on getting that myself, waiting to hear some feedback on the monoprice cables first though, otherwise ill go with the samsung oem charger i posted above
Click to expand...
Click to collapse
I bought this one since it is an official Samsung charger, for cheap ($5):
http://www.amazon.com/gp/product/B001UB279A
But I bought it using the link shown below - the "buy all items" showing the Samsung car charger, Samsung regular charger + USB cable, and Samsung extra USB cable for $10 total.
Bear in mind - the USB cables are all the shortie length cables.
The car charger seems nice, has a spiral cord of decent length - same as my old Motorola charger.
vikramjatt11 said:
The USB wire the comes in the box was way too small for my liking, so i needed a longer wire, and I figured I might as well buy another wall outlet for travel or just for the heck of it. And I could not find a decent wire for under $5, until I came across this.
$2.28 - High-Speed WALL Power to USB Female Converter (1000mA) - White: http://www.monoprice.com/products/p...=10311&cs_id=1031106&p_id=6784&seq=1&format=2
$1.40 - 6ft USB 2.0 A Male to Micro 5pin Male 28/24AWG Cable w/ Ferrite Core (Gold Plated): http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5458&seq=1&format=2
They are out stock on the Black Wall USB plug.
The only downside was the S+H, it was $6.60. So I ordered 4 wires, and 2 plugs ($9.74). Total came to $16.34, which is not bad as I could not find anything even close on Amazon.
The combination work perfect. I have attached some pictures below. (Note: All pictures were taking with SGSII, EXCEPT the picture with the SGSII in it, that was taken with a Nexus 4G.)
Just wanted to let everyone know in case someone also wanted to buy one of these.
Click to expand...
Click to collapse
What's the difference between the Gold plated and the non Gold plated?
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5459&seq=1&format=2
and this
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5139&seq=1&format=2
? Besides .10..
the description of the gold plated one says:
- Gold Plated Connectors for corrosion resistence ensuring consistant and reliable conductivity
- Ferrite Core to filter out signal noise and reduce transmission errors
Sean-El said:
What's the difference between the Gold plated and the non Gold plated?
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5459&seq=1&format=2
and this
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5139&seq=1&format=2
? Besides .10..
Click to expand...
Click to collapse
Since I have not seen anyone answer your question, yes, monoPrice is an excellent site for great and cheap cables. Highly recommend them. Also, since you are coming from a BB, that is the brand of home/office charger that I always use... The foldable blade BB micro USB chargers that put out 5V worked perfectly on my Evo 4G and current Evo 3D... Looking to use that for my Epic 4GT when I get that in a couple days
t0t said:
Sorry if this is a noob question, Im coming from a blackberry so Im a bit retarded in this subject.
Are monoprice good quality cables? The supplied cable with the epic touch is just.. ridiculously short. The block.. charger.. thing is fine, I just want a longer cable! I found some longer OEM chargers as well that I was thinking of getting off Amazon.
IE:
http://www.amazon.com/Samsung-ATADU...=wireless&rps=1&ie=UTF8&qid=1316961827&sr=1-1
Either way its no big deal, just dont want to end up frying my phone because I cheaped out on cables lol.
Click to expand...
Click to collapse
I got one of those $2.28 wall blocks for my girlfriend's 2nd gen ipod touch. She was delighted because ipods don't come with wall chargers. At least the 2nd gen didn't. Apple trying to be "green" and crap.
Is there any risk using these non-Samsung chargers. Yes, they also put out 1000mA, but do they auto-shut off once the charging is complete, etc?
just a heads up the wall/usb charger plug has been discontinued
anyone know of another 1000mA option?
pi1ot said:
Is there any risk using these non-Samsung chargers. Yes, they also put out 1000mA, but do they auto-shut off once the charging is complete, etc?
Click to expand...
Click to collapse
No risk using non-Samsung as long as you get one from a reputable brand or company. After all, the included chargers are usually POS and still get the job done. No offense, but the charger in the OP looks to be very cheaply-made. And I have to wonder if the components inside reflect that. If you invest in a higher quality charger now you will still be using it 3-4 phones later, if not longer, and they will pay for themselves. Same goes for cables.
Monoprice is awesome. When working in the A/V field I lost count how many hundreds of their cables and adapters I used. Several levels of quality usually available, at great pricepoints.
I've been using a Rosewill 4-port wall charger for a few years and it's been problem-free. Puts out 2 amps.