So, I see a lot of different information about full wipes. First, just to make sure, a full wipe is the factory reset, correct?
Assuming this is the case, why do I see people say that a full wipe is recommended before install of another ROM? Since you are factory resetting, wouldn't you want to reset TO the ROM you are installing? Thus, wouldn't you wipe AFTER a flash?
Thanks.
You wipe before to give the new ROM a clean slate to be flashed on. It is a good idea to do this to ensure that no ROM specific data messes with the new ROM. Otherwise you might notice FC or other problems.
Sent from my PC36100
Does a factory reset cover the cache wipes as well? or should one do those after the factory reset. Also, would it be a good idea to wipe / flash / wipe?
yes and yes
that's exactly what i do bcz with some rom you might get stuck in an endless splash screen reboot
Related
Okay, I was on AOKP M4 and I wanted to upgrade to M5.
So I backup everything and make a backup of my ROM. I wipe the phone and caches and flash M5 with the GAPPS, with the latest CWM touch recovery. When my phone reboots I notice I have the same wallpaper as before and when I unlock my phone my pin is still requested and all of my apps and settings stayed exactly the same. I was never asked to sign into my Google account and the start up/set up screen never came up. I checked to see if I even updated and yes I was on M5. Now the ROM isn't very fast or smooth and I get a lot of force closes and things not working properly.
I tried the whole process again with the CWM non-touch recovery, and again my phone did not fully wipe and all my apps and setting remained exactly the same.
I tried it again with the TWRP touch recovery, and again my phone did not fully wipe and everything was the same and my phone remains kind of slow and I'm getting a lot of force closes.
Why is my phone not fully wiping? What can I do to fix this?
I would really appreciate some help!
you need to wipe factory / data.
wiping cache and dalvik doesn't wipe "/system/etc etc etc"
1. Wipe Factory
2. Wipe Data
3. Wipe Dalvik
4. Flash ROM
5. Flash Gapps.
6. Flash Kernel
for full wipe.
zephiK said:
you need to wipe factory / data.
wiping cache and dalvik doesn't wipe "/system/etc etc etc"
1. Wipe Factory
2. Wipe Data
3. Wipe Dalvik
4. Flash ROM
5. Flash Gapps.
6. Flash Kernel
for full wipe.
Click to expand...
Click to collapse
Yes, that is what I'm doing. I'm wiping factory/data and I'm still having the same problem
Like with the TWRP recovery, I went to wipe, I hit factory reset, then cache, then dalvik cache and then flashed the ROM and GAPPS and all my apps and settings stayed the same. It was like if I had dirty flashed it. I don't understand what's going on.
zephiK said:
you need to wipe factory / data.
wiping cache and dalvik doesn't wipe "/system/etc etc etc"
1. Wipe Factory
2. Wipe Data
3. Wipe Dalvik
***FORMAT /SYSTEM*** (under mount in CWM I believe)
4. Flash ROM
5. Flash Gapps.
6. Flash Kernel
for full wipe.
Click to expand...
Click to collapse
Try that additional step too. May or may not help
Sent from my Galaxy Nexus using XDA
killyouridols said:
Try that additional step too. May or may not help
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
What does that do exactly? Would I have to worry about my media and sd card being wiped?
SubyWill said:
What does that do exactly? Would I have to worry about my media and sd card being wiped?
Click to expand...
Click to collapse
No, all music, pictures ect will still be in place.
Sent from my Galaxy Nexus using XDA
Okay thank you, I guess this time in TWRP I'll do factory reset, cache, dalvik cache, and system and see if it works out
Okay, so I did factory reset, cache, dalvik cache, and format system.
I flashed M5 and GAPPS, rebooted and everything was still the same. My phone did not fully wipe.
I don't understand what's going. I'm so frustrated right now
SubyWill said:
Okay, so I did factory reset, cache, dalvik cache, and format system.
I flashed M5 and GAPPS, rebooted and everything was still the same. My phone did not fully wipe.
I don't understand what's going. I'm so frustrated right now
Click to expand...
Click to collapse
I would do a factory reset, if that doesn`t help flash a stock rom and root your phone again. BTW don`t you have a nandroid backup to revert to
gee2012 said:
I would do a factory reset, if that doesn`t help flash a stock rom and root your phone again. BTW don`t you have a nandroid backup to revert to
Click to expand...
Click to collapse
I have a nandroid backup, but that doesn't solve the problem of my phone not wiping.
I guess I'll unroot my phone and lock the bootloader and re-do everything to see. I don't understand why my phone isn't wiping correctly.
sometimes cwm just doesnt work with factory wipe. i've used it a few times now and sometimes it works and sometimes it doesnt. i have no idea why. you can try doing a factory wipe from the phone settings>backup and reset. ive only done that twice but it worked both times. if that still doesnt work just go with a fresh flash of google images using fastboot.
SubyWill said:
I have a nandroid backup, but that doesn't solve the problem of my phone not wiping.
I guess I'll unroot my phone and lock the bootloader and re-do everything to see. I don't understand why my phone isn't wiping correctly.
Click to expand...
Click to collapse
Init.d folders can only be wiped with a factory reset afaik, or manualy off course. By locking and unlocking the phone you perform a factory reset anyway, so i would flash a stock rom and start fresh. No chance on left files or scripts. You can do it with GNex Toolkit, option 8. Put the downloaded and not extracted .tgz file here C:\Galaxy Nexus ToolKit\put_google_factory_image_here and flash.
Thanks guys, I'll try that!
Hello,
I have an Amazon Kindle Fire with gedeROM v1.7. I love the updates because it makes my device better and better.
But can i update my device without data wipe so i don't have to reinstall and reconfigure the entire device every time. And if I can can someone please tell me how.
My usual procedure is download file, data wipe, clear davlik and cache, flash, wipe cache restart and wonderfull a better device. But all the data and apps go with the wipe so any help would be awesome!
Thnx for all the help!!
Moaely said:
My usual procedure is download file, data wipe, clear davlik and cache, flash, wipe cache restart and wonderfull a better device.
Click to expand...
Click to collapse
If you're not switching to a different ROM (ie, from CM7 to CM9, or from hashcode to energy...) then you can optionally skip the data wipe (factory reset), which will retain your data and applications...
Alternatively, you may want to take a look at Titanium Backup.
Thnx for the info.
I have been hearing a lot about Titanium Backup, can you give more info about the program.
With TB you can back up any apps on your device. Then when you update a rom just download TB again and then you can restore your apps that you backed up. I love TB and use it on every device that I have rooted. It is a lifesaver!! Ok maybe a time saver anyway!! LOL!!!!
I had a REALLY bad experience from not wiping everything completely. I'd definitely do a backup, like Titanium or MyBackupPro, and wipe it all just to be safe. To many goofy things can happen if you don't.
It really depends on what ROM your flashing. There are rare occasions you can cross flash without issue. Not recommended. Just updating the same ROM so wipe is necessary, unless mentioned by the dev.
If you do wipe than BUYING titanium backup is the way to go. The free version doesn't auto install apps, each needs confirmation.
I can get any ROM on the kf or my gnex but up and running in less than 15 minutes.
this is what I have been doing and I am not sure if it's bad to do or not. I make a backup of just my data using twrp, then I wipe the caches and do a factory reset. Then I install the rom, and then restore my data using twrp
chris_m128 said:
this is what I have been doing and I am not sure if it's bad to do or not. I make a backup of just my data using twrp, then I wipe the caches and do a factory reset. Then I install the rom, and then restore my data using twrp
Click to expand...
Click to collapse
Restoring your backed up data is akin to not having done "factory reset" in the first place.
You shouldn't encounter any major issues so long as you're flashing newer versions of the same ROM and there hasn't been a large change (for example, switching to linaro).
I want to update my Unofficial CM10 +3.x Kernel to the latest update from Hashcode.
UNOFFICIAL CM10 + 3.x Kernel for Kindle Fire [09/16 CHARGING+]
When you do an update like this, do you wipe everything like I did when I first flashed the ROM? I mean, when I installed, I wiped system, factory reset, cache and dalvik cache. Then I flashed the ROM and then I flashed gapps.
So now I just want to update the OS, what do I need to wipe? And will I need to flash gapps again?
CAn't ask this in the development thread 'cause my n00b hat it still too shiney.
Thanks!
A question like this doesn't belong in the development thread because it isn't development related.
If you're going from one ROM to a different one, you need to wipe System and Factory Reset (data and cache).
If the ROM is simply an update of an existing ROM, generally all you need to wipe is data and cache. There are always exceptions to this so it's always a good idea to make a backup in case things turn sour.
After installation of the ROM you have the option to wipe cache and dalvik. It isn't required but not wiping them has been known to cause some bugginess.
soupmagnet said:
A question like this doesn't belong in the development thread because it isn't development related.
If you're going from one ROM to a different one, you need to wipe System and Factory Reset (data and cache).
If the ROM is simply an update of an existing ROM, generally all you need to wipe is data and cache. There are always exceptions to this so it's always a good idea to make a backup in case things turn sour.
After installation of the ROM you have the option to wipe cache and dalvik. It isn't required but not wiping them has been known to cause some bugginess.
Click to expand...
Click to collapse
Thank you once again, soupmagnet. Yeah this is just an update to my current ROM. So .... I won't need to flash gapps again?
I'm slowly figuring this stuff out. hehehe... When I was 30 I picked this stuff up quick. Turning 60 on Thursday and stuff tends to need a little more pondering lately. hahaha
Anywho.... thanks
Oh, yeah. You need to flash Gapps if you wipe system.
soupmagnet said:
Oh, yeah. You need to flash Gapps if you wipe system.
Click to expand...
Click to collapse
OK, see, now you're messin' with the old man here... hehehe
On one hand I'm hearing if I am only updating my current ROM, I just wipe data and cache.
Then you tell me I have to flash gapps if I wipe System.
But prior you said I only need to wipe system if I'm going from one ROM to a different ROM.
So.... I'm just updating my current ROM. I wipe data and cache, flash the updated ROM, wipe dalvik.... done...
no flash gapps, right?
I need to look at TWRP again to see exactly how it presents the choices. Don't be hatin' on the old guy for bein' dumb now.
OK, booted to TWRP. When I select Wipe my choices are : Cache, Dalvik Cache, Factory Reset, System and then External Storage. So... in your first answer to me when you said to go to a different ROM I should wipe "System and Factory Reset (data and cache)" it appears you are telling me that "System and Factory Reset" is another way of referring to "data and cache". Is that correct?
Gapps go in the /system/app folder so if you wipe the system partition, Gapps will go along with it.
soupmagnet said:
Gapps go in the /system/app folder so if you wipe the system partition, Gapps will go along with it.
Click to expand...
Click to collapse
GAaaahhh..... I just wiped System and watched as it processed /system
and then I wiped Factory Reset and watched as it processed /data and /cache
So I guess that answers my confusion.
Guys I tried searching and only found this thread http://forum.xda-developers.com/showthread.php?t=1147152&highlight=cache+dalvic+wipe
which didn't help me at all
Can someone please explain when to do each of the following?
Reformat
Wipe Data
Wipe Cache
Wipe Dalvik
I want to have the cleanest install, so do I do all?
Thanks
I will give thanks to all that help me clarify when to use what in what combination
eyecon82 said:
Guys I tried searching and only found this thread http://forum.xda-developers.com/showthread.php?t=1147152&highlight=cache+dalvic+wipe
which didn't help me at all
Can someone please explain when to do each of the following?
Reformat
Wipe Data
Wipe Cache
Wipe Dalvik
I want to have the cleanest install, so do I do all?
Thanks
I will give thanks to all that help me clarify when to use what in what combination
Click to expand...
Click to collapse
yes do all for the cleanest install, I only do this if switching ROMs, or a developer tells you too in his updated thread. Some do it after every update. Basically I just overwrite old ROM with new update, which doesn't erase your data(always wipe dalvik and cache prior to doing this). Wiping data erases everything you've done to the newly installed ROM. Sometimes not doing a clean install even from the same ROM update can cause issues with certain apps that are reading your data. I had this issue with one app last update to jellybomb jb ROM.
Assuming you mean factory reset when u say wipe data. If u actually choose the "wipe data" option it will wipe internal sd.
But yes all 3 should be wiped, however factory reset usually wipes cache and dalvik-cache too. So factory reset by itself should do just fine
Hey guys,When I rooted my GS3 I wasn't sure how but kinda stumbled on having it done. When I did it I'm sure I didn't do a factory reset, or wipe the dalvik cache either,is this called a dirty flash? My question is if I want to RE root my phone,can I just simply follow the same procedure even though it's rooted already, and then re flash the WS Rom?..Thanks and please understand this is all new to me so any and all help is greatly appreciated..Phil
There is no need to Reroot. Yea, you did a dirty flash. A clean flash involves wiping cache, dalvik, data, and system. Sometimes it's a good idea to wipe your internal storage as well, copy everything you want off of it and then wipe. I always wipe everything 3 times, just habit. Then flash away!
Thanks, so I can just do a factory reset, wipe cache, wipe dalvik, and then re flash my rom? Cool, could this have anything to do with my battery life being bad after this?.. thanks again.
sent from my Wicked GS3
Factory reset isn't enough, you need to wipe data and system as well. As for the battery, anything could be the issue. A clean flash would help.
Update
Update.. I wiped my cache, wiped my dalvik cache, done a factory reset and system wipe ( I guess that's what it's called), and then reflashed the Wicked Sensations Rom, and my phone is operating much smoother. I read that after a new rom flash your battery should be re calibrated so I installed a battery calibrator. I'll post back in a few days with a report on whether or not there is a difference.