Related
I just compiled a tun.ko and got OpenVPN working on the Tmobile Gslate! so I thought I would share:
1- Rooted (thanks to Chandon)
http://forum.xda-developers.com/showthread.php?t=1065882
2- Install tun.ko (Attached below)
download and unzip
Code:
adb remount
adb push tun.ko /system/lib/modules
adb shell
chmod 755 /system/lib/modules/tun.ko
Note: This tun module was built for kernel 2.6.36.3+
3- Install BusyBox using BusyBox Installer (from Market)
Install to /system/xbin
4- Install OpenVPN using OpenVPN Installer (from Market)
Install binary to /system/xbin
Install route to /system/xbin/bb
5- Install OpenVPN Settings (from Market)
6- Install OpenVPN static binary:
Download Static openvpn
Un-bz2 the file (7-Zip on Windows | bunzip2 on linux)
Code:
adb remount
adb push openvpn-static /system/xbin/openvpn
adb shell
chmod 555 /system/xbin/openvpn
7- Link Busybox ifconfig and route to /system/xbin/bb
Code:
adb shell
su
mkdir /system/xbin/bb
ln -s /system/xbin/ifconfig /system/xbin/bb/ifconfig
ln -s /system/xbin/route /system/xbin/bb/route
8- Setup OpenVPN Settings (from Market)
OpenVPN settings > Advanced > Load tun kernel module <- turn ON
OpenVPN settings > Advanced > TUN module settings
Load module using - insmod
Path to tun module - /system/lib/modules/tun.ko
9- copy your .conf files to /sdcard/openvpn
REBOOT
CONNECT!~
Extra for SMB mounters : Cifs.ko ! - Attached!
Edit: June 5 '11 - Extra for Asian users : nls_utf8.ko - Attached!
Well, I'm able to connect to my OpenVPN server now, but there must be something different in the binary..."client.conf: Connected" keeps spamming the notification area. Are you having this problem?
On a related note - I've got a couple other options, if I can get my cross-compiling tools set up correctly...I could use SonicWALL's NetExtender app, but that needs ppp_async and ppp_synctty built. I also wanted to be able to talk to a Windows-friendly PoPToP VPN server, but I suspect I'd need the ppp_mppe.ko built for that.
I tried compiling the whole kernel with the options I've mentioned, but I don't think I did it right...the make went all the way through, but I was using the gcc 4.4.3 eabi set in the SDK/NDK toolset. Since then, I've been trying to set things up according notes I found at K's Cluttered loft ( at triple-w dot (noob html limitation workaround) ailis.de/~k/archives/19-ARM-cross-compiling-howto dot HyperText Markup Language ) but start encountering problems when I try to build glibc...do you know of any instructions/tutorials which might help to educate this n00b (aye, that be me) in the fine art of ARM cross compiling?
bealesbane said:
Well, I'm able to connect to my OpenVPN server now, but there must be something different in the binary..."client.conf: Connected" keeps spamming the notification area. Are you having this problem?
On a related note - I've got a couple other options, if I can get my cross-compiling tools set up correctly...I could use SonicWALL's NetExtender app, but that needs ppp_async and ppp_synctty built. I also wanted to be able to talk to a Windows-friendly PoPToP VPN server, but I suspect I'd need the ppp_mppe.ko built for that.
I tried compiling the whole kernel with the options I've mentioned, but I don't think I did it right...the make went all the way through, but I was using the gcc 4.4.3 eabi set in the SDK/NDK toolset. Since then, I've been trying to set things up according notes I found at K's Cluttered loft ( at triple-w dot (noob html limitation workaround) ailis.de/~k/archives/19-ARM-cross-compiling-howto dot HyperText Markup Language ) but start encountering problems when I try to build glibc...do you know of any instructions/tutorials which might help to educate this n00b (aye, that be me) in the fine art of ARM cross compiling?
Click to expand...
Click to collapse
Yeah I have that spamming problem too .. always have with the honeycomb tablets.
I used 4.4.0 eabi, and had to hard code the localversion in the setlocalversion file and absolute path to the eabi modules in the makefile to get it to cross compile
I built and attached the ppp_async.ko , ppp_synctty.ko , ppp_mppe.ko for you (I did not test a insmod as I built and tested the cifs and tun on a friends tablet - do let me know if these work!)
That's great! Thanks for putting those together. All of the modules you created insert fine with insmod (this version of busybox still has an issue with modprobe running on this tablet, suspect may be related to self-referring parameter, but hope to experiment more later) with the exception of mppe. That one comes back with "insmod: init_module '/system/lib/modules/ppp_mppe.ko' failed (File exists)".
This, however, may not be due to the module itself, strictly speaking. The other two, which are presented by SonicWALL as a workaround to their proprietary VPN app, inserted fine, but still produce an I/O error when a connection is attempted...closer inspection of the app's log reveals a similar complaint under the hood:
06-01 08:01:36.848 I/NetExtender.ppp( 8207): Nxhelper: start pppd main routine
06-01 08:01:36.858 D/NetExtender.ppp( 8207): using channel 1
06-01 08:01:36.858 E/NetExtender.ppp( 8207): Couldn't create new ppp unit: File exists
06-01 08:01:36.858 I/NetExtender.ppp( 8207): Nxhelper: pppd hung up, notify the service
My off the wall guess, pending further investigation, is that inserting mppe, or trying to initialize the other two, results in an attempt to create a device handle which is not being properly enumerated? ( i.e., attempting to create an instance of /dev/ppp, which already exists, instead of a new handle, say, /dev/ppp0, ppp1, etc.) Again, just theorizing blindly at this point - but you've certainly given me a great deal to work with, and I say thank ya big big.
I'll update you with any progress I make here, but at least for the time being I still have basic connectivity to one of my networks, and I can do much with that. And the cifs module works a treat as well!
In the meantime, a simple script allows me to toggle the VPN on and off without being annoyed by the spamming...then I add a widget to the script using ScriptManager (from the market) and viola! Look ma, no hands!
Code:
#!/system/bin/sh
BB="/system/xbin/busybox"
VPN="/system/xbin/openvpn"
TUNDTL=`$BB ifconfig tun0 2>&1`
RESULT=$?
if [ $((RESULT)) -eq 1 ]; then
$VPN --config /mnt/sdcard/openvpn/client.conf --daemon MYVPN
else
VPNPID=`ps openvpn | grep "^root"`
VPNPID=`echo $VPNPID | cut -d" " -f2`
if [ $((VPNPID)) -gt 99 ]; then
$BB kill -KILL $VPNPID
fi
fi
exit
(Just for anyone who doesn't want to wait until OpenVPN Settings gets a bugfix for Honeycomb. Obviously, adjust locations as needed. Oh, and don't give the script a name that starts with "openvpn"...unless you WANT a kamikaze script. This simple script obviously wouldn't work for multiple tunnels, (if they're even supported), but it does ya fine for the basic config.)
awesome idea for the spamming .. sadly I have 8 openVPN servers I switch between so i have to put up with the spamming.. any idea what the reason of the spamming is? maybe contact the dev?
The source for the app is available at 'code.google.com/p/android-openvpn-settings'. The issue has been reported already by a few people (issue 70), but it looks like there are quite a few other issues reported, so no telling if or when Mr. Schäuffelhut will have a chance to review it. It seems like it would be a good starter project for a would-be contributor...I haven't done any java developing, but it seems like it would be easier to isolate our issue and tweak it than bloat my simple script to allow multiple PIDs to be tracked and toggled...though the latter is certainly possible, and after I get my second OpenVPN server online (Audiogalaxy offline for better part of day yesterday, need to make myself independent of that), if the Java is too daunting I just may do so. So many tempting projects, so little time.
Simple VPN handler script to tide us over until 0.4.8 or more in OpenVPN-Settings
Ok, since you were so kind as to compile those extra modules for me, I figure the least I can do is give you something in return. Here's a simple VPN handler to manage multiple tunnels. Filenames for config files are entered relative to the CFGS folder, and module load/remove is manual rather than auto...and I put in connection sharing, as I'm using it this way...but it'll certainly let you use as many tunnels as the kernel will let you work with.
As always, the standard, 'you take your life into your own hands if you use this code, not responsible for problems up to and including user death' disclaimer applies. It seems to be working for me, though I'm only using 2 VPN's ATM.
Good luck! (Will still let you know if I make any progress in Java Dev)
Code:
[email protected]: /data/local/bin > cat ./vpnhandler
#!/system/bin/sh
export BB="/system/xbin/busybox"
export VPN="/system/xbin/openvpn"
export MODS="/system/lib/modules"
export CFGS="/mnt/sdcard/openvpn"
export SPACES=" "
LOOPBACK=0
while [ $((LOOPBACK)) -eq 0 ]; do
LOOPBACK=1
CIFMOD=`$BB lsmod | grep -c "^cifs"`
if [ $((CIFMOD)) -eq 0 ]; then CIFMOD="Load"; else CIFMOD="Remove"; fi
TUNMOD=`$BB lsmod | grep -c "^tun"`
if [ $((TUNMOD)) -eq 0 ]; then TUNMOD="Load"; else TUNMOD="Remove"; fi
clear
echo "Simple VPN Handler"
echo "=================="
echo
echo "ACT # Tunnel Name Configuration File "
echo "--- --- -------------------- ------------------------------"
while read vpndefs; do
TUNNO=`echo "${vpndefs}" | cut -d"~" -f1`
TUNNAME=`echo "${vpndefs}" | cut -d"~" -f2`
TUNCFG=`echo "${vpndefs}" | cut -d"~" -f3`
TUNSTAT=`$BB ps w | grep openvpn | grep -c "\-\-daemon ${TUNNAME}\$"`
if [ $((TUNSTAT)) -eq 1 ]; then TUNSTAT="*"; else TUNSTAT=" "; fi
DISPLINE=" ${TUNSTAT} ${SPACES:0:$((3-${#TUNNO}))}${TUNNO} ${TUNNAME}${SPACES:0:$((22-${#TUNNAME}))}${TUNCFG}"
echo "${DISPLINE}"
done < "${CFGS}/cfglist"
echo
echo "_______________________________________________________________"
echo
echo " A - Add a new tunnel definition"
echo " D - Delete an existing tunnel "
echo " C - ${CIFMOD} CIFS Module "
echo " T - ${TUNMOD} TUN Module "
echo " S - Share tap0 to eth0 traffic "
echo " X - Break traffic forwarding "
echo " Q - Quit "
echo
echo -n " Select action, or a tunnel number to toggle on or off : "
read actkey
if [ "$actkey" = "C" -o "$actkey" = "c" ]; then
LOOPBACK=0
if [ "$CIFMOD" = "Load" ]; then
LOADMOD=`$BB insmod ${MODS}/cifs.ko 2>&1`
else LOADMOD=`/system/bin/toolbox rmmod cifs.ko 2>&1`
fi
fi
if [ "$actkey" = "T" -o "$actkey" = "t" ]; then
LOOPBACK=0
if [ "$TUNMOD" = "Load" ]; then
LOADMOD=`$BB insmod ${MODS}/tun.ko 2>&1`
else LOADMOD=`/system/bin/toolbox rmmod tun.ko 2>&1`
fi
fi
if [ "$actkey" = "S" -o "$actkey" = "s" ]; then
LOOPBACK=0
iptables -F; iptables -t nat -F; iptables -X; iptables -t nat -X
echo 1 | tee /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o tap0 -j MASQUERADE
iptables -A FORWARD -i eth0 -j ACCEPT
fi
if [ "$actkey" = "X" -o "$actkey" = "x" ]; then
LOOPBACK=0
iptables -F; iptables -t nat -F; iptables -X; iptables -t nat -X
echo 0 | tee /proc/sys/net/ipv4/ip_forward
fi
if [ "$actkey" = "A" -o "$actkey" = "a" ]; then
LOOPBACK=0
echo; echo -n " Enter tunnel number to assign : "; read TUNNO
TUNCHK=`cat "${CFGS}/cfglist" | grep -c "^${TUNNO}~"`
if [ $((TUNCHK)) -eq 0 ]; then
echo; echo -n " Enter a name for the tunnel : "; read TUNNAME
echo; echo -n " Enter filepath/name for config file (relative to ${CFGS}) : "; read TUNCFG
echo "${TUNNO}~${TUNNAME}~${TUNCFG}" >> "${CFGS}/cfglist"
else echo -n " That number is already in use. "; read TUNNO
fi
fi
if [ "$actkey" = "D" -o "$actkey" = "d" ]; then
LOOPBACK=0
echo; echo -n " Enter tunnel number to delete : "; read TUNNO
TUNCHK=`cat "${CFGS}/cfglist" | grep -c "^${TUNNO}~"`
if [ $((TUNCHK)) -eq 0 ]; then
echo -n " That number is not currently in use. "; read TUNNO
else vpndefs=`cat "${CFGS}/cfglist" | grep "^${TUNNO}~"`
TUNNAME=`echo "${vpndefs}" | cut -d"~" -f2`
TUNSTAT=`$BB ps w | grep openvpn | grep -c "\-\-daemon ${TUNNAME}\$"`
if [ $((TUNSTAT)) -gt 0 ]; then
echo; echo -n " Tunnel is active. Turn off before deleting."; read TUNNO
else RESULT=`cat "${CFGS}/cfglist" | egrep -v "^${TUNNO}~" > "${CFGS}/cfglist.tmp"`
$BB mv -f "${CFGS}/cfglist.tmp" "${CFGS}/cfglist"
fi
fi
fi
if [ "$actkey" = "Q" -o "$actkey" = "q" ]; then LOOPBACK=0; fi
if [ $((LOOPBACK)) -eq 1 ]; then
TUNCHK=`cat "${CFGS}/cfglist" | grep -c "^${actkey}~"`
LOOPBACK=0
if [ $((TUNCHK)) -eq 0 ]; then
echo -n " That number is not currently in use. "; read TUNNO
else TUNNO="${actkey}"
vpndefs=`cat "${CFGS}/cfglist" | grep "^${TUNNO}~"`
TUNNAME=`echo "${vpndefs}" | cut -d"~" -f2`
TUNCFG=`echo "${vpndefs}" | cut -d"~" -f3`
TUNSTAT=`$BB ps w | grep openvpn | grep -c "\-\-daemon ${TUNNAME}\$"`
if [ $((TUNSTAT)) -gt 0 ]; then
VPNPID=`$BB ps w | grep openvpn | grep "\-\-daemon ${TUNNAME}"`
VPNPID=`echo $VPNPID | cut -d" " -f1`
if [ $((VPNPID)) -gt 99 ]; then
RESULT=`$BB kill -KILL $VPNPID`
fi
else RESULT=`$VPN --config "${CFGS}/${TUNCFG}" --daemon "${TUNNAME}"`
fi
fi
fi
if [ "$actkey" = "Q" -o "$actkey" = "q" ]; then LOOPBACK=1; fi
done
exit
Note: It'll throw out some screen errors if you don't have a zero length file in $CFGS/cfglist, but it'll let you add your first tunnel anyway. (Didn't bother to trap for that.)
Oh, and ScriptManager doesn't seem to like digging for scripts in /data/local/bin, but doesn't appear to have a problem executing things in /mnt/sdcard, even though I don't seem to be able to set the execute bit on any file in that fs. There's reference in Google of known glitch in some kernels that cause fs' mounted with the 'default_permissions,allow_other' flags to behave strangely. If they ever fix that, you may need to relocate, that's all.
Note also that the "ACT" column which denotes 'active' tunnels with an '*' only verifies that there is a process running with the designated label name. At this time, actual connectivity is left to you to determine.
it's very helpful, thanks very much!!
but could you compile nls_utf8.ko too? please
You should try and come up with a working recovery!
Sent from my LG-V909 using XDA Premium App
bealesbane said:
Ok, since you were so kind as to compile those extra modules for me, I figure the least I can do is give you something in return. Here's a simple VPN handler to manage multiple tunnels. Filenames for config files are entered relative to the CFGS folder, and module load/remove is manual rather than auto...and I put in connection sharing, as I'm using it this way...but it'll certainly let you use as many tunnels as the kernel will let you work with.
As always, the standard, 'you take your life into your own hands if you use this code, not responsible for problems up to and including user death' disclaimer applies. It seems to be working for me, though I'm only using 2 VPN's ATM.
Good luck! (Will still let you know if I make any progress in Java Dev....
Click to expand...
Click to collapse
Bealsbane way to go man, that is far more code than I could figure out! now i feel like i owe you a beer! haha .. I tried the code but it helps to have a gui currently .. i although do have alot of Java experience and possibly you and I could get a new OpenVPN Settings/Installer for gingerbread/honeycomb based devices!
once again thanks!
aureole999 said:
it's very helpful, thanks very much!!
but could you compile nls_utf8.ko too? please
Click to expand...
Click to collapse
Added to the first Post .. please test it and let me know if it works! good luck!
edit: tested by aureole999 and confirmed working
Excellent work ru1dev. I just added this thread to the G-Slate XDA bit.ly bundle. Would you mind if I posted a link to it over on G-SlateFans?
Bling_Diggity said:
Excellent work ru1dev. I just added this thread to the G-Slate XDA bit.ly bundle. Would you mind if I posted a link to it over on G-SlateFans?
Click to expand...
Click to collapse
Go ahead as long as it is a link back to the OP. Thanks for spreading the knowledge
please dont bash me as i know im a little off topic but hi everyone i have a major issue with my rooted gslate.if anyone can help it would be greatly appreciated. i downloaded cw from the market and when it askes you for compatibility i accedently chose the option (lg optimus 3d) thinking it was for my gslate and now after i turned off the gslate and go to turn it back on its stuck on LG blackscreen and says
[HasValidKernelImage] Magic value mismatch:
[DetectOperatingSystems]kernel image is invalid !!!
Starting Fastboot USB download protocol
Ive looked all over the internet and cant find anything to help me out so please can someone help me.
maybe a way to nvflash the proper kernel back.
tun.ko checksum
Hi guys, can anybody please post the md5sum output of the tun.ko? even though im using the same kernel, i cannot load the module on my g-slate. thanks
jomnoc said:
Hi guys, can anybody please post the md5sum output of the tun.ko? even though im using the same kernel, i cannot load the module on my g-slate. thanks
Click to expand...
Click to collapse
md5 - 3daf2d134dc2ae6c4a40fe3d8ac49344
Thanks! I have 6707fd6a79cc849d13e8dd4016f96028 .... ideas? can you upload your file? Thanks again
jomnoc said:
Thanks! I have 6707fd6a79cc849d13e8dd4016f96028 .... ideas? can you upload your file? Thanks again
Click to expand...
Click to collapse
yes that is the md5 for the tun.ko .. in a rush i gave you the md5 for the zip of the tun.ko previously. are you sure you are running kernel 2.6.36.3+
it has to be exactly that kernel..with the '+' on the end
yes i am. or i was haha.. it was a friend's tablet. but it certainly had that kernel version. thanks for the help. if i get it again i may ask for help
Hello all,
Upon porting sense 4 I needed to mount a certain partition via a command that needed the exact dev block, so I decided to find out using adb and post my results here for other devs to see:
Filesystem........................Size......Used........Available......Use%........Mounted on
tmpfs...........................209.0M......48.0K.........209.0M...........0%................/dev
/dev/block/mmcblk0p1....861.1M....739.5M.........121.6M.........86%............/sdcard <-- May vary
/dev/block/mtdblock4.......35.0M.......1.3M...........33.7M...........4%............./cache
/dev/block/mmcblk0p2..1003.6M....330.8M..........672.8M.........33%............/sd-ext <-- May vary
/dev/block/mtdblock3.....269.4M....165.0M..........104.4M.........61%.........../system
/dev/block/mtdblock5.....150.0M.......1.5M..........148.5M...........1%............../data
I hope somebody finds this helpful. I was going to post this is general, but since it is not a question and is directed for developers like myself (and this is where I would look for this info TBH) I posted it here.
Okay guys, have fun
Here is a list of commands you can use in recovery/installation scripts.
[ flash_lock mesg setserial
[[ flash_unlock mkdir setsid
adbd flashcp mkdosfs sh
adjtimex flock mke2fs sha1sum
arp fold mkfifo sha256sum
ash free mkfs.ext2 sha512sum
awk freeramdisk mkfs.vfat sleep
base64 fs mknod sort
basename fsync mkswap split
bbconfig ftpget mktemp stat
bbinstall.sh ftpput modinfo strings
blkid fuser modprobe stty
blockdev getopt more sum
brctl grep mount swapoff
bunzip2 groups mountpoint swapon
busybox gunzip mpstat sync
bzcat gzip mv sysctl
bzip2 halt nanddump tac
cal head nandwrite tail
cat hexdump nbd-client tar
catv htcbatt nc taskset
chattr htcdumlock netstat teamwin
chgrp id nice tee
chmod ifconfig nohup telnet
choice_fn insmod nslookup telnetd
chown install ntpd test
chroot iostat od tftp
clear ip offmode_charging tftpd
cmp kill parted time
comm killall patch timeout
cp killall5 pgrep top
cpio less pidof touch
crond libbmlutils.so pigz tr
crontab libc.so ping traceroute
cut libcutils.so pipe_progress true
date libdl.so pkill ttysize
dc libext2_blkid.so pmap tune2fs
dd libext2_com_err.so power_test ueventd
depmod libext2_e2p.so poweroff umount
detect_key libext2_profile.so printenv uname
devmem libext2_uuid.so printf uncompress
df libext2fs.so ps unexpand
diff libflashutils.so pstree uniq
dirname liblog.so pwd unix2dos
dmesg libm.so pwdx unlzma
dnsd libmmcutils.so rdev unlzop
dos2unix libstdc++.so readlink unpigz
du libstlport.so realpath unxz
dump_image libz.so reboot unzip
e2fsck linker recovery uptime
echo ln renice usleep
ed losetup reset uudecode
egrep ls resize uuencode
env lsattr rev vi
erase_image lsmod rm watch
expand lsof rmdir wc
expr lsusb rmmod wget
false lzcat route which
fbsplash lzma run-parts whoami
fdisk lzop rx xargs
fgrep lzopcat sdparted xz
find man sed xzcat
fix_permissions.sh md5check.sh seq yes
flash_image md5sum setconsole zcat
Ubuntu Lucid 10.04 android-vnc Defy port
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS DOESNT MODIFY, REPLACE OR CHANGE YOUR CURRENT ROM OR ANDROID OS. IT RUNS IN CHROOT USING VNC, LIKE A VIRTUAL MACHINE! SO IT CANNOT BRICK OR HARM YOUR DEVICE!
Requirements :
Root and Busybox installed
At least 3.5GB free space on SD card
Android Terminal Emulator (Available on Play Store)
android-vnc-viewer (Available on Play Store)
Click to expand...
Click to collapse
Downloads :
Ubuntu image + scripts
ubuntu.sh script
*Froyo kernel scripts
Click to expand...
Click to collapse
Installation guide
1. Download Ubuntu image from Downloads section
2. Extract Ubuntu 7-zip file contents to /sdcard/ubuntu
3. Download ubuntu.sh from attachments to /sdcard/ubuntu and replace the existing one
4. Start Terminal Emulator
5. Type in the following lines, each line is followed by enter (return) key, you'll need to run this only the first time :
su
cd /sdcard/ubuntu
sh ubuntu.sh
6. The Installation script starts and it creates necessary files and folders on internal memory, type in starttux
7. When the starttux command finishes, type in ui
8. Now you'll have to switch to android-vnc-viewer without closing Terminal Emulator (press home key to go to launcher and start vnc)
9. Setup VNC viewer :
password : 12345678
address : 127.0.0.1
port : 5901
color format : 24-bit color
10. Now press connect and Ubuntu GUI will start!
11. To exit Ubuntu GUI press menu while in vnc -> disconnect
12. Return to terminal emulator and type in killui
13. Type stoptux
14. Type exit
15. Type exit if Terminal is still opened, reboot device for proper unmount.
Click to expand...
Click to collapse
Video instalation guide :
http://www.youtube.com/watch?v=O9ercgiqwi0
Screenshot gallery :
Click to expand...
Click to collapse
Notes :
Tested on Defy CM10 2007+ by Quarx and HTC HD2 CM9 4.0.4 HWA build
I recommend using touchpad as input in vnc viewer
127.0.0.1 is known as localhost
If you have any errors post them here
The script can run without ubuntu.sh from downloads, but I recommend to replace it anyway
Credits : anantshri for image file
Soon I'll port Backtrack 5
Fell free to donate
Click to expand...
Click to collapse
F.A.Q
Q : Can this brick or harm my device?!
A : It simply can't cause it doesn't change anything inside your system!
Q : Is this a ROM or what?
A : THIS ISN'T A CUSTOM ROM! This is an image file that starts using Terminal and VNC (for gui), and it doesn't change or modify your system.
Just like a virtual machine.
Q : Can we use BT keyboard & mouse?
A : Yes.
Q : I've got problems with mouse/keyboard mapping, solution?
A : Open $HOME/.vnc/xstartup file with a text editor, and copy the text below :
Code:
#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
#x-terminal-emulator -geometry 80×24+10+10 -ls -title “$VNCDESKTOP Desktop” &
#x-window-manager &
export XKL_XMODMAP_DISABLE=1
/etc/X11/Xsession
For noobs : "XKL_XMODMAP_DISABLE=1" fixes the mapping or wrong positioning the mouse.
Q : Can we use this for other devices than Defy?
A : The script supports ext4 module roms, so it should work on ICS (I've tested on Jelly Bean) and GB rooted devices.
To change the resolution (by default 850x480) type this into the terminal after starttux command :
Code:
vncserver -geometry 1280×800
1280x800 represents scren resolution, so if you use SGS3 e.g, use vncserver -geometry 1280x720
Q :Can this work on ARMv6?
A : I don't have an ARMv6 device, so I haven't tested it, I think that it may work pretty slow, but it should still work somehow.
So please, if anyone has ARMv6 based device, please test and report.
why not 12.04????
Enviado desde mi MB525 usando Tapatalk 2
Both 11.04 and 12.04 aren't supported on our CPU or it would be slow (their image files are way to big for my sd card)
I've also tried this on HTC HD2 and it works.
Tommorow expect Backtrack 5.
mihovil13 said:
Both 11.04 and 12.04 aren't supported on our CPU or it would be slow (their image files are way to big for my sd card)
I've also tried this on HTC HD2 and it works.
Tommorow expect Backtrack 5.
Click to expand...
Click to collapse
Pre-Installed 11.10 and 12.04 OMAP3/OMAP4 images...
https://wiki.ubuntu.com/ARM/OMAP
Thanks for the link, I'll try in cca 12h.
Also tommorow (in my time) I'll post a port of BT5 (I hope that this script could get it work)
Can wie use phone?
Sent from my MB526 using xda app-developers app
What phone?
Swyped off my Defy using Jelly Bean
Defy development is on fire these days....gonna try this in 10 days when I go home...!!!!!
Sent from my MB526 using xda app-developers app
Can I install and play linux games?
Is it possible to connect Bluetooth mouse and keyword?
Sent from my MB525 using xda app-developers app
Yes it is, I use BT mouse and keyboard, games are already installed.
I'll edit FAQ now
Updated second post with FAQ
mihovil13 said:
What phone?
Swyped off my Defy using Jelly Bean
Click to expand...
Click to collapse
The phone apk so can i telephone with this Rom...
Sent from my MB526 using xda app-developers app
Jojo1992 said:
The phone apk so can i telephone with this Rom...
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Apparently you haven't read the OP.
This isn't a ROM, it's like a virtual machine inside your system.
Your ROM stays as it is, this starts using an app (VNC and Terminal)
Problem
I have followed all the steps in terminal but i get an error after i enter 'starttux'.
See the screenshot if u can help me,,, thank u
oxristsis said:
I have followed all the steps in terminal but i get an error after i enter 'starttux'.
See the screenshot if u can help me,,, thank u
Click to expand...
Click to collapse
Try changing the script files using Notepad++ to this (delete all the text and replace with this)
ubuntu.sh
Code:
echo " "
echo "Ubuntu Chroot v0.2-anant-netbook"
echo "This process does NOT damage Android OS!"
echo " "
echo "Original Script by Charan Singh"
echo "Modified for Ubuntu Chroot by Max Lee at NexusOneHacks.net"
echo "Xperia Customized by Anant shrivastava http://anantshri.info "
echo " "
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
echo "Cleaning up old Chunks . . ."
rm /system/bin/tuxcmd
rm /system/bin/starttux
rm /system/bin/stoptux
echo "Creating necessary directories"
if [ ! -d /data/local/mnt ]
then
mkdir /data/local/mnt
fi
#copy the files to places
echo "Setting up files"
cp -f starttux /system/bin
cp -f stoptux /system/bin
cp -f tuxcmd /system/bin
echo "Ubuntu is now configure!"
echo " "
echo "to Start ubuntu type 'starttux'"
echo "once ubuntu started use tuxcmd to gain shell"
echo "when you want to shutdown type 'stoptux'"
starttux
Code:
#Mount SYSTEM RW
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
#exporting useful variables
export kit=/sdcard/ubuntu
export bin=/system/bin
export mnt=/data/local/mnt
export PATH=$bin:/usr/bin:/usr/sbin:/bin:$PATH
export TERM=linux
export HOME=/root
# Mounting Image to the farthest loop point
# FIXME : check if mount sucessfull otherwise abort whole process.
mknod /dev/block/loop255 b 7 255
busybox losetup /dev/block/loop255 $kit/ubuntu.img
busybox mount -t ext2 /dev/block/loop255 $mnt
mount -t devpts devpts $mnt/dev/pts
mount -t proc proc $mnt/proc
mount -t sysfs sysfs $mnt/sys
# Mounting SD Card inside the CHROOT
busybox mount -o bind /sdcard /data/local/mnt/sdcard
#seting environment
sysctl -w net.ipv4.ip_forward=1
echo "Setting /etc/resolv.conf to Google Open DNS 8.8.8.8 and 8.8.4.4"
echo "nameserver 8.8.8.8" > $mnt/etc/resolv.conf
echo "nameserver 8.8.4.4" >> $mnt/etc/resolv.conf
echo "Setting localhost on /etc/hosts "
echo "127.0.0.1 localhost" > $mnt/etc/hosts
echo "Brought to you by NexusOneHacks.net and the open source community! "
echo "Customized by Anant shrivastava http://anantshri.info"
echo "Ubuntu configured to use it just type 'tuxcmd'"
tuxcmd
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
export kit=/sdcard/ubuntu
export bin=/system/bin
export mnt=/data/local/mnt
export PATH=$bin:/usr/bin:/usr/sbin:/bin:$PATH
export TERM=linux
export HOME=/root
echo "Brought to you by NexusOneHacks.net and the open source community! "
echo "Customized by Anant shrivastava http://anantshri.info"
echo " "
busybox chroot $mnt /bin/bash
stoptux
Code:
#Cleanup
#After exit command is executed clear it all up
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
export kit=/sdcard/ubuntu
export bin=/system/bin
export mnt=/data/local/mnt
export PATH=$bin:/usr/bin:/usr/sbin:/bin:$PATH
export TERM=linux
export HOME=/root
echo "Cleaning the Ubuntu leftover and returning back the memory to Android."
echo "by Anant Shrivastava http://anantshri.info "
echo "Shutting down Ubuntu"
sync
busybox umount -l $mnt/sdcard
busybox umount -l $mnt/dev/pts
busybox umount -l $mnt/proc
busybox umount -l $mnt/sys
busybox umount -l $mnt
busybox losetup -d /dev/block/loop255
mount -o remount,ro -t yaffs2 /dev/block/mtdblock3 /system
echo " "
echo "Please reboot to properly unmount Ubuntu"
echo "Specially If you recieved an error before this line"
You maybe even don't have to go type tuxcmd after the starttux shell, if the shell changes to root:localhost automatically, then just type ui
update : I've managed to get BT5 working!!
Gnome shell 3 is working ?
Sent from my MB525 using xda premium
tarunyad said:
Gnome shell 3 is working ?
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
is not avaliable for ubuntu 10.04, so no gnome shell 3...
Yes but there's gnome preinstalled in the image
Swyped off my Defy using Jelly Bean
Code:
* Your warranty is now void..
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone
* bootloops and alarm does not go off. Please do some research if you have any
* YOU are choosing to make these modifications.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements :-
- Android 4.0+
- Custom kernel (with init.d support)
- Root and Busybox installed
- 3MB of free space in "/system".
Feature :-
- Full memory management.
- kernel tweaks and improvements for better performance and battery life.
- Entropy generator engine used to reduce lags.
- Zipalign apps in "/system" and apps in "/data" every 48 hours which result in less RAM usage.
- Sqlite optimizations and faster database access.
- CPU governors tweaks and improvements for better performance and battery life.
- Increased SD Card read-ahead cache to 2048 KB .
- Ad blocking.
- Default.prop tweaks and improvements.
- Cleans log files and tombstones at every boot.
- Many other tweaks for better performance and battery life!
Steps :-
- go to system/etc/init.d/delete all files in it
- Download the zip
- Flash zip via recovery
- Feel the difference (1st boot may take time)
User praise :-
Code:
$lim $hady :- Awesome....!!!!!!!!!
One word Awesome....!!!!
Playing Subway Surfers without a Single Lag... Feels like my phone is running on GB..
Code:
skaloyskie :- Thanks man! I've noticed that my phone suffered less lag even I'm using Opera mini (Multi-tabbed browsing) and downloading movies via torrent. Nice share!
Code:
iossux :- U rock bro really boosted my performance
Some part of my Default .prop
#enable harware egl profile
debug.egl.profiler=1
#16BIT transparency , Smother Scrolling
persist.sys.use_16bpp_alpha=1
#debug.composition.type=gpu
debug.composition.type=c2d
debug.performance.tuning=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
#Enable tile rendering
debug.enabletr=true
persist.sys.composition.type=gpu
#3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
#Media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
#Speed liquid
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
# For sensor sleep control
ro.ril.sensor.sleep.control=1
#loggers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
#Scrolling
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#battery saver
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#improve battery under no signal -- need test
ro.mot.eri.losalert.delay=1000
#net speedtweaks
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
#streaming faster
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
Some part of INIT.D :-
# Disable Logger
busybox rm /dev/log/main
# Busybox Remounting
busybox mount -o remount,noatime,barrier=0,nobh /system
busybox mount -o remount,noatime,barrier=0,nobh /data
busybox mount -o remount,noatime,barrier=0,nobh /cache
echo "Mounted Busybox"
# clearing junk files
busybox find /data/data -type d -iname "*cache*" -exec busybox rm -f {}/* ';' -exec echo "Cleared {}" ';'
rm -f /data/local/*.apk
rm -f /data/local/tmp/*.apk
rm -f /data/*.log
rm -f /data/log/*.log
rm -f /cache/*.*
rm -f /cache/recovery/*.*
rm -f /data/system/dropbox/*.txt
rm -f /data/backup/pending/*.tmp
rm -f /data/tombstones/*.*
echo "Junk cleared"
# Defrag Database Files
for i in \
`find /data -iname "*.db"`
do \
sqlite3 $i 'VACUUM;';
# Move Dalvik-Cache To Cache Partition
CACHESIZE=$(df -k /cache | tail -n1 | tr -s ' ' | cut -d ' ' -f2)
if [ $CACHESIZE -gt 4000 ]
then
echo "Large cache detected, moving dalvik-cache to /cache"
if [ ! -d /cache/dalvik-cache ]
then
busybox rm -rf /cache/dalvik-cache /data/dalvik-cache
mkdir /cache/dalvik-cache /data/dalvik-cache
fi
busybox chown 1000:1000 /cache/dalvik-cache
busybox chmod 0771 /cache/dalvik-cache
busybox mount -o bind /cache/dalvik-cache /data/dalvik-cache
busybox chown 1000:1000 /data/dalvik-cache
busybox chmod 0771 /data/dalvik-cache
else
echo "Small cache detected, dalvik-cache will remain on /data"
fi
echo "Moved Dalvik-Cache To Cache Partition"
# Mod: Battery
setprop wifi.supplicant_scan_interval=180
setprop pm.sleep_mode=1
setprop ro.ril.disable.power.collapse=1
# Mod: Performance
setprop ro.kernel.android.checkjni=0
setprop persist.sys.purgeable_assets=1
setprop debug.sf.hw=1
setprop ro.telephony.call_ring.delay=0
setprop ro.foreground_app_mem=1280
setprop ro.visible_app_mem=2560
setprop ro.perceptible_app_mem=3840
setprop ro.heavy_weight_app_mem=6400
setprop ro.secondary_server_mem=7680
setprop ro.backup_app_mem=8960
setprop ro.home_app_mem=2048
setprop ro.hidden_app_mem=12800
setprop ro.content_provider_mem=15360
setprop ro.empty_app_mem=20480
setprop ro.foreground_app_adj=0
setprop ro.visible_app_adj=1
setprop ro.perceptible_app_adj=2
setprop ro.heavy_weight_app_adj=4
setprop ro.secondary_server_adj=5
setprop ro.backup_app_adj=6
setprop ro.home_app_adj=1
setprop ro.hidden_app_min_adj=7
setprop ro.empty_app_adj=15
# Mod: Graphics
setprop debug.performance.tuning=1
setprop video.accelerate.hw=1
setprop ro.media.dec.jpeg.memcap=8000000
setprop ro.media.enc.hprof.vid.bps=8000000
setprop persist.sys.use_dithering 1
# Touch Screen Sensitivity
echo 7035 > /sys/class/touch/switch/set_touchscreen;
echo 8002 > /sys/class/touch/switch/set_touchscreen;
echo 11000 > /sys/class/touch/switch/set_touchscreen;
echo 13060 > /sys/class/touch/switch/set_touchscreen;
echo 14005 > /sys/class/touch/switch/set_touchscreen;
# Renice Apps
renice -20 `pidof com.android.phone`
renice -19 `pidof com.android.inputmethod.latin`
renice -19 `pidof com.swype.android.inputmethod`
renice -17 `pidof com.android.systemui`
renice -9 `pidof com.android.settings`
renice -9 `pidof com.android.vending`
renice -6 `pidof com.sec.android.app.camera`
renice -6 `pidof com.sec.android.app.fm`
renice -6 `pidof com.google.android.apps.maps`
renice -4 `pidof com.google.android.apps.googlevoice`
renice -3 `pidof android.process.media`
# SqLite Optimize
for i in \
`busybox find /data -iname "*.db"`;
do \
/system/xbin/sqlite3 $i 'VACUUM;';
/system/xbin/sqlite3 $i 'REINDEX;';
done;
if [ -d "/dbdata" ]; then
for i in \
`busybox find /dbdata -iname "*.db"`;
do \
/system/xbin/sqlite3 $i 'VACUUM;';
/system/xbin/sqlite3 $i 'REINDEX;';
done;
fi;
if [ -d "/datadata" ]; then
for i in \
`busybox find /datadata -iname "*.db"`;
do \
/system/xbin/sqlite3 $i 'VACUUM;';
/system/xbin/sqlite3 $i 'REINDEX;';
done;
fi;
for i in \
`busybox find /sdcard -iname "*.db"`;
do \
/system/xbin/sqlite3 $i 'VACUUM;';
/system/xbin/sqlite3 $i 'REINDEX;';
done;
echo "SqLite Database Optimized"
echo "System Optimized And Boosted at $( date +"%m-%d-%Y %H:%M:%S" )"
function mountrw {
mount|grep "/system "|grep rw >/dev/null
[ $? -eq 1 ] && mount -o remount,rw $(mount|grep "/system "|awk '{ print $1 }') /system
}
function mountro {
mount|grep "/system "|grep ro >/dev/null
[ $? -eq 1 ] && mount -o remount,ro $(mount|grep "/system "|awk '{ print $1 }') /system
}
echo " Starting package optimization"
echo "Starting ZipAlign $( date +"%m-%d-%Y %H:%M:%S" )"
zipalign -c 4 $apk;
ZIPCHECK=$?;
if [ $ZIPCHECK -eq 1 ]; then
mountrw;
echo ZipAligning $(basename $apk)
zipalign -f 4 $apk /cache/$(basename $apk);
if [ -e /cache/$(basename $apk) ]; then
cp -f -p /cache/$(basename $apk) $apk
rm /cache/$(basename $apk);
else
echo ZipAligning $(basename $apk) Failed DC;
fi;
else
echo Velocity ZipAlign already completed on $apk
fi;
done;
for apk in /data/app/*.apk ; do
zipalign -c 4 $apk;
ZIPCHECK=$?;
if [ $ZIPCHECK -eq 1 ]; then
echo ZipAligning $(basename $apk)
zipalign -f 4 $apk /cache/$(basename $apk);
if [ -e /cache/$(basename $apk) ]; then
cp -f -p /cache/$(basename $apk) $apk
rm /cache/$(basename $apk);
else
echo ZipAligning $(basename $apk) Failed DC
fi;
else
echo Velocity ZipAlign already completed on $apk
fi;
done;
mountro;
echo "ZipAlign finished at $( date +"%m-%d-%Y %H:%M:%S" )"
Tested on Xperia S thnxx to EXBLAZE
credits
persanno
exblaze
kuro
Works with trinity kernel and ROM,now testing
Sent from my LT26ii using XDA Premium 4 mobile app
red-Tequila said:
Works with trinity kernel and ROM,now testing
Sent from my LT26ii using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Trinity ROM and kernel already has many tweaks applied in it.. You don't need to try any.. If u have a Stock ROM without any mods, but with some custom kernel, then try this..
sudhindrakv said:
Trinity ROM and kernel already has many tweaks applied in it.. You don't need to try any.. If u have a Stock ROM without any mods, but with some custom kernel, they try this..
Click to expand...
Click to collapse
Trinity Rom has tweaks but they are not enabled by default as in init.d does not run at boot... It never did in his previous roms either, and I don't think he is to bothered to fix it!
Sent from my LT26i using xda premium
Damoedge said:
Trinity Rom has tweaks but they are not enabled by default as in init.d does not run at boot... It never did in his previous roms either, and I don't think he is to bothered to fix it!
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Yes. Its your choice in Aroma to select which kind of tweaks you need.. Anyway try this.. Do have a backup.. Lets not spam this thread.. There's another thread to discuss about Trinity ROM..
Damoedge said:
Trinity Rom has tweaks but they are not enabled by default as in init.d does not run at boot... It never did in his previous roms either, and I don't think he is to bothered to fix it!
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Hi, Just like.I.said, Ive added Init.d enabler on. 3.6 via.Settings.apk
Even you install this tweak it will never work, unless you enabled some required perm. For the init.d files
Sent from my LT26ii using xda app-developers app
TrinityHaxxorX said:
Hi, Just like.I.said, Ive added Init.d enabler on. 3.6 via.Settings.apk
Even you install this tweak it will never work, unless you enabled some required perm. For the init.d files
Sent from my LT26ii using xda app-developers app
Click to expand...
Click to collapse
You are referring on your ROM or you genaralise?
If you are using stock ROM, rooted and deodexed I don't see why it shouldn't work (at least some part of it)
Sent from my LT26i using Tapatalk 4
TrinityHaxxorX said:
Even you install this tweak it will never work, unless you enabled some required perm. For the init.d files
Sent from my LT26ii using xda app-developers app
Click to expand...
Click to collapse
So you are saying that this will not work??
Sent from my LT26i using xda premium
Man I doubt about it cause I installed and notice more fluidity,however about bb..
Sent from my LT26ii using XDA Premium 4 mobile app
I still haven't tried but guys, when you try it, test firmly.
Every device will fly after restart - when you restart it - your RAM gets cleared and device will work softer and faster.
Try to see what's happening after one or two hours - don't fall on placebo effect afrer restart.
And please, don't get me wrong, I'm not saying it doesn't work, I haven't tried it yet.
I'm just saying how to test
Sent from my LT26i using Tapatalk 4
Tested. Well done. I report two bugs, some apps does not start automatically after a reboot,like Antitirus,etc. and photos won't open from Album Widget, only from the album itself.Anyway, good job, waiting for a stable version,until then, I'm back to my backup.
sure
Mr.AnakinSkywalker said:
Tested. Well done. I report two bugs, some apps does not start automatically after a reboot,like Antitirus,etc. and photos won't open from Album Widget, only from the album itself.Anyway, good job, waiting for a stable version,until then, I'm back to my backup.
Click to expand...
Click to collapse
as i dont own this device i cannot test it many times on friends mobile
need some tester/devs from this thread
BOSS said:
as i dont own this device i cannot test it many times on friends mobile
need some tester/devs from this thread
Click to expand...
Click to collapse
I understand, at least for now we know two bugs on SONY XPERIA S
Does it work on CM ? haahah newbie question but does it?
uDroid said:
Does it work on CM ? haahah newbie question but does it?
Click to expand...
Click to collapse
I dont think so
Pls read the op
Sent from my LT26i using Tapatalk 4
Rangeeshnathan said:
I dont think so
Pls read the op
Sent from my LT26i using Tapatalk 4
Click to expand...
Click to collapse
im sorry but i tested it and it works i guess.
i feel the difference.
whaiting for XPERIA Z version
I'm trying to build Lineage 14.1 for serranoltexx (for 5 days now).
When I started the compilation using "breakfast serranoltexx" an error appears after the 7 percent mark (~2minutes).
I followed this guide: wiki.lineageos. org/devices/serranoltexx/build
with a fresh Ubuntu 17.04 VM Box installation two times but that error always appears.
The only thing I still could mention is that pulled the proprietary blobs using my phone as stated in the instructions not with the stock Rom but Lineage 14.1 already installed.
Full console output:
(error at line #321) pastebin. com/vC06fV36
Error:
Code:
make: Leaving directory '/home/mrglue/android/lineage/kernel/samsung/msm8930-common'
[ 7% 2535/34256] Building Kernel
FAILED: /bin/bash -c "(make -j4 CFLAGS_MODULE=\"-fno-pic\" -C kernel/samsung/msm8930-common O=/home/mrglue/android/lineage/out/target/product/serranoltexx/obj/KERNEL_OBJ ARCH=arm CROSS_COMPILE=\"/home/mrglue/android/lineage/prebuilts/misc/linux-x86/ccache/ccache arm-linux-androidkernel-\" zImage ) && (if grep -q 'CONFIG_OF=y' /home/mrglue/android/lineage/out/target/product/serranoltexx/obj/KERNEL_OBJ/.config ; then echo \"Building DTBs\" ; make -j4 CFLAGS_MODULE=\"-fno-pic\" -C kernel/samsung/msm8930-common O=/home/mrglue/android/lineage/out/target/product/serranoltexx/obj/KERNEL_OBJ ARCH=arm CROSS_COMPILE=\"/home/mrglue/android/lineage/prebuilts/misc/linux-x86/ccache/ccache arm-linux-androidkernel-\" dtbs ; else echo \"DTBs not enabled\" ; fi ) && (if grep -q 'CONFIG_MODULES=y' /home/mrglue/android/lineage/out/target/product/serranoltexx/obj/KERNEL_OBJ/.config ; then echo \"Building Kernel Modules\" ; make -j4 CFLAGS_MODULE=\"-fno-pic\" -C kernel/samsung/msm8930-common O=/home/mrglue/android/lineage/out/target/product/serranoltexx/obj/KERNEL_OBJ ARCH=arm CROSS_COMPILE=\"/home/mrglue/android/lineage/prebuilts/misc/linux-x86/ccache/ccache arm-linux-androidkernel-\" modules && make -j4 CFLAGS_MODULE=\"-fno-pic\" -C kernel/samsung/msm8930-common O=/home/mrglue/android/lineage/out/target/product/serranoltexx/obj/KERNEL_OBJ INSTALL_MOD_PATH=../../system ARCH=arm CROSS_COMPILE=\"/home/mrglue/android/lineage/prebuilts/misc/linux-x86/ccache/ccache arm-linux-androidkernel-\" modules_install && mdpath=\`find /home/mrglue/android/lineage/out/target/product/serranoltexx/system/lib/modules -type f -name modules.order\`; if [ \"\$mdpath\" != \"\" ];then mpath=\`dirname \$mdpath\`; ko=\`find \$mpath/kernel -type f -name *.ko\`; for i in \$ko; do arm-linux-androidkernel-strip --strip-unneeded \$i; mv \$i /home/mrglue/android/lineage/out/target/product/serranoltexx/system/lib/modules/; done; fi && mdpath=\`find /home/mrglue/android/lineage/out/target/product/serranoltexx/system/lib/modules -type f -name modules.order\`; if [ \"\$mdpath\" != \"\" ];then mpath=\`dirname \$mdpath\`; rm -rf \$mpath; fi ; else echo \"Kernel Modules not enabled\" ; fi )"