Develop Bugs

Please help!! Major Brickage!

Ok so here goes, hoping you guys can help... I've searched and found a few threads related to a similar issue, tried everything suggested, and still nadda....
Being the forgetful fool I am, I flashed the most up to date official RUU on my rooted Desire with Oxygen HBOOT without flashing the downgader HBOOT first... The idea was to do a simple unroot back to stock...
Needless to say things didn't go well. I now have a silver HTC logo with the 4 warning triangles in each corner
Read that flashing the downgrader then the RUU again would work so...
Flashed the downgrader HBOOT using fastboot... success!
Ran the RUU again... ERROR! 140 wrong bootloader version.
Tried flashing and running various recoveries, boots, etc. using fastboot... all give ERROR remote 12 signature verify fail
Cannot get to vol down+power
Cannot get to back+power
When I have the silver HTC and unplug USB I get the following:
BRAVO PVT1 SHIP S-ON
HBOOT-0.80.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
Mar 29 2010,21:34:33
RUU (in orange box)
Any ideas if there's anything I can do to get the phone booting again??
Thanks a lot for any help you can give!!

cjacko said:
Ok so here goes, hoping you guys can help... I've searched and found a few threads related to a similar issue, tried everything suggested, and still nadda....
Being the forgetful fool I am, I flashed the most up to date official RUU on my rooted Desire with Oxygen HBOOT without flashing the downgader HBOOT first... The idea was to do a simple unroot back to stock...
Needless to say things didn't go well. I now have a silver HTC logo with the 4 warning triangles in each corner
Read that flashing the downgrader then the RUU again would work so...
Flashed the downgrader HBOOT using fastboot... success!
Ran the RUU again... ERROR! 140 wrong bootloader version.
Tried flashing and running various recoveries, boots, etc. using fastboot... all give ERROR remote 12 signature verify fail
Cannot get to vol down+power
Cannot get to back+power
When I have the silver HTC and unplug USB I get the following:
BRAVO PVT1 SHIP S-ON
HBOOT-0.80.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
Mar 29 2010,21:34:33
RUU (in orange box)
Any ideas if there's anything I can do to get the phone booting again??
Thanks a lot for any help you can give!!
Click to expand...
Click to collapse
You are supposed to flash stock hboot, then flash hboot downgrader before RUU. This is because hboot downgrader only downgrades the hboot to allow RUU to s-on the phone. Technically now you are still on oxygen hboot. Are you able to fastboot flash hboot?
Sent from my HTC Original Desire using Tapatalk

Hmm ok so I'm even more stupid than I originally thought...
Don't think I can flash HBOOTs in fastboot
Whenever I try 'fastboot flash hboot ...' with the stock alpharev hboot I get the 'remote 12 signature verify fail' error...
Thanks for the quick reply

Well screw me sideways... I fixed it...
For anyone who lands in the same (stupid) position as my idiot self, I just flashed the official 2.3 Gingerbread update RUU...
Flashed first time, booted first time, now boots every time...
No idea how or why... but yay

Unroot mistake !!important!!

Hey Guys,
I just tried to unroot my HTC Desire cause of warranty.
So I tried a ruu but it doesn't worked.
So i crated a PB99IMG an went to bootloader.
The bootloader made all but suddenly it said:
Main version is older / update failed !
Now I can't do anything than go to recovery
And at bootloader top those is standing:
BRAVO UNKNOWN SHIP S-ON
HBOOT-0.75.0000
MICROP-031d
TOUCH PANEL-SYNT0101
Radio-4.05.00.11
Ma 5 2010,21:12:15
Someone is able to tell me,what I can do that my phoen will work again (equal if rooted or unrooted)

tried my guide? I bet you haven't, and I bet this thread was pointless

bortak said:
tried my guide? I bet you haven't, and I bet this thread was pointless
Click to expand...
Click to collapse
Didn't tried it yet.
But I tried teh same RUU which you told. and there I'm getting the error that Main version is older !
So I'm actually s-on cause of an otehre ruu which i used before which amde me s-on but didn't flash a rom.
EDIT:
I downloaded your RUU again.
Made a PB99IMG and went to bootloader.
now it ask if I want to run update !
BUT my vol. up butten is broken (the reason why i want warranty)
so i cant confirm,any way to confirm without vol up ?

The error it's giving is impossible since you're flashing a RUU that is MUCH newer than what you appear to have there.. try the 2.3.3 RUU (since a WWE RUU won't cover warranty), that HAS to work.. and even if it gets stuck on the HTC screen or something it doesn't matter since you're getting it fixed anyway.

[Q] HTC Desire HD A9191 stuck on boot logo. Help!

Yesterday when trying to update the original vodafone rom to 2.3.5, it downloaded normally, installed it rebooted and got stuck on the HTC logo and its been like this ever since.
HBOOT text:
ACE PVT SHIP S-ON
HBOOT - 0.85.0007
MICROP - 0438
RADIO - 26.03.02.26_M
eMMC - boot
Oct 11 2010, 12: 47: 02
Options:
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
I've already tried flashing stock 1.32 PD98IMG.zip and nothing it stopped and said incorrect cid. Then i tried a ruu and it couldnt flash it.
I dont have any clockwork or other recovery installed. Factory reset doesn't do anything either
What do i do to get it working?

Maybe try to flash recovery like the radio. Put my file to /sdcard and flash how you know, volume'-' + power button to get bootloader, etc...
If recovery flashed successful, change the name of image file in sdcard, again turn on to bootloader and choose recovery boot.
http://db.tt/qOx0iMUi
Or flash new radio: http://db.tt/EBbQ4GvO
Sent from overpowered DHD

zoomer 331 i cant access your files, "the item that you are trying to access has been deleted or isnt available to you."

ze_yaya said:
zoomer 331 i cant access your files, "the item that you are trying to access has been deleted or isnt available to you."
Click to expand...
Click to collapse
Reupload.
Sent from HTC DESIRE HD

can you explain me a bit im really a noob at this, thanks

ze_yaya said:
can you explain me a bit im really a noob at this, thanks
Click to expand...
Click to collapse
I need to go out soo for fast help I give you this, read and learn:
HELP
thanks to inspiredbyhtc

ze_yaya said:
Yesterday when trying to update the original vodafone rom to 2.3.5, it downloaded normally, installed it rebooted and got stuck on the HTC logo and its been like this ever since.
HBOOT text:
ACE PVT SHIP S-ON
HBOOT - 0.85.0007
MICROP - 0438
RADIO - 26.03.02.26_M
eMMC - boot
Oct 11 2010, 12: 47: 02
Options:
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
I've already tried flashing stock 1.32 PD98IMG.zip and nothing it stopped and said incorrect cid. Then i tried a ruu and it couldnt flash it.
I dont have any clockwork or other recovery installed. Factory reset doesn't do anything either
What do i do to get it working?
Click to expand...
Click to collapse
As you are S-ON, you won't be able to flash a RUU that is not signed for your phone. That means, that you won't be able to flash a ruu that is not exactly for your phone / carrier. Don't try to install a CWM recovery not as PD98IMG nor in fastboot...you won't succeed as u are S-ON. You have just to flash a RUU for your correct model. What carrier and CID is your phone??
To find the CID you can get it by adb shell getprop in cmd. If you need help to do that just let me know.

so how do you chek the cid with adb? i tried it and no idea

cid: VODAP021
carrier vodafone australia

ze_yaya said:
cid: VODAP021
carrier vodafone australia
Click to expand...
Click to collapse
Just let me see if I can get a RUU that can work for u. Then try to update again....

If you have never rooted voda UK have a policy to replace the device if it dies in a software update, it will be a reconditioned one but may be worth calling them. Voda au may be the same, worth a try to see before you try anything more, I had another phone within 24 hours. Hope this helps.
Sent from my HTC Desire HD A9191 using xda premium

Thank you everybody for your help, I had to send it to vodafone and now it works finally.

Returning to Stock Help Needed

Hi All,
Returning missus Desire back to stock and have searched and found many guides..
following through, I'm basically installing the following RUU from .EXE file:
RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704.exe
The phone was previously on Orange and I understand there is no RUU for this.
Upon installing this EXE...it gets to the area about checking the phone and intialising and all I get everytime is an Error 170 USB Connection Error. It can't seem to see the phone.
I am on XP and have tried the phone booted in to its current ROM (ICS) and also under FASTBOOT USB but neither makes any difference...
Any ideas?
Many thanks...
Rich

You're missing proper drivers on your PC. Try to download and install htc sync or driver package from htc dev site and then to reconnect phone.
Sent from my HTC Desire using XDA

Thanks....Ive installed HTC Sync and now worked fine...
Although I believe I am now stuck on the white HTC screen Whoops!!!
Any ideas?

In my Recovery area it still says:
Revolutionary
Bravo PVT1 Ship S-Off
HBOOT 6.93.1002
MICROP-031d
Touch Panel - SYNT0101
Radio 4.05.00.11
Any ideas???

Funkyfin2000 said:
In my Recovery area it still says:
Revolutionary
Bravo PVT1 Ship S-Off
HBOOT 6.93.1002
MICROP-031d
Touch Panel - SYNT0101
Radio 4.05.00.11
Any ideas???
Click to expand...
Click to collapse
That's not recovery, that's bootloader. Below that you have meny loking smth like this:
FASTBOOT
RECOVERY
ERASE STORAGE...
You can use volume up and down buttons to navigate, highlight recovery and then press power to enter recovery.
If you wanna install stock, reboot your phone and let RUU running. My recomendation is to use 2.3 RUU since it's made for all versions of desire no matter of carrier. You can find it on htc dev site.
Sent from my HTC Desire using XDA

Well I have put back the stock HBOOT....
installed a RUU which now just gives me a white HTC screen and goes no further....
I downloaded the 2.3.3 correct RUU but it won't see my device and HTC sync won't install the drivers.
Any ideas folks?
Rich

Oh my BOOTLOADER now says this:
ALPHAREV
BRAVO PVT1 SHIP S-OFF
HBOOT 6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
Radio 4.05.00.11

And also...within Device Manager my phone is being picked up as Android Bootloader Interface

Ok, this is the trick, your hboot has write protection and ruu can't overwrite radio. From your bootloader I can see you have old radio which won't work with 2.3 RUU. Of course RUU should overwrite the radio during install but it's not posible because of protected hboot...
You have to download downgrade hboot from alpharev site, flash it and you will have unlocked hboot. After that run RUU from PC and it will overwrite both radio and hboot.
But, you will lose s-off and root, so revolutionary again :-D
And don't worry about what's written in device manager, it's normal.
Sent from my HTC Desire using XDA

Thanks Nloo for taking an interest...
|I have already flashed Bravo Stock off the Alpharev site .... you can see in my post a change in the HBOOT information from Revolutionary to ALPHArev.....
If I try using the RUU it just says it can't find the Phone again.....USB error 170....
Any more help would be appreciated please...bricked phone!!

Funkyfin2000 said:
Thanks Nloo for taking an interest...
|I have already flashed Bravo Stock off the Alpharev site .... you can see in my post a change in the HBOOT information from Revolutionary to ALPHArev.....
If I try using the RUU it just says it can't find the Phone again.....USB error 170....
Any more help would be appreciated please...bricked phone!!
Click to expand...
Click to collapse
You actually don't want to read carefully, not stock bravo but DOWNGRADE that's the right one. After flashing you'll have this on top in bootloader:
ALPHAREV UNLOCK
not just alpharev.
Then after flashing reboot to bootloader not fastboot and then run RUU.
If RUU won't work you can try with rom.zip on sd card but that's a different story.
Sent from my HTC Desire using XDA

How can I fix my desire - no Recovery but working fastboot

Hi guys,
I have a HTC Desire, S-ON () with HBOOT 1.02.0001 which will boot into fastboot but won't enter recovery. When I try to boot into recovery, it shows the HTC logo on white but never progresses and I have to pull the battery. On a normal boot, the device will vibrate 7 times in succession and never makes it past the HTC logo.
I was trying to fix up the device using an RUU but it failed mid-way through and now I'm wondering what my options are, as I only have fastboot working.
If I can get a working recovery then I can flash a ROM from there.
Thanks in advance

Flash the 2.3 RUU.

I get a signature error with this, do I need a gold card?

blackcoffee85 said:
I get a signature error with this, do I need a gold card?
Click to expand...
Click to collapse
no.. u sure u downloaded the right ruu

jmcclue said:
no.. u sure u downloaded the right ruu
Click to expand...
Click to collapse
I was using the wrong RUU before but I've located the correct one, Vodafone 2.33.161.2 which is the current device version, and the RUU just hangs at 'Updating Signature'. It does eventually fail with error 155, Unknown error, suggesting an incorrect RUU or ROM.
Any idea where I'm going wrong? Will a goldcard allow me to flash the 2.3 RUU from HTC?

blackcoffee85 said:
I was using the wrong RUU before but I've located the correct one, Vodafone 2.33.161.2 which is the current device version, and the RUU just hangs at 'Updating Signature'. It does eventually fail with error 155, Unknown error, suggesting an incorrect RUU or ROM.
Any idea where I'm going wrong? Will a goldcard allow me to flash the 2.3 RUU from HTC?
Click to expand...
Click to collapse
with the 2.3 gb upgrade u do NOT need a goldcard, thats why abaaaabbbb63 suggested it. click bortaks guide in my sig and go down to resourses and download the 2.3 gb upgrade ruu from there. it wont do u any harm in reading the guide aswell

I'm following the steps in bortaks guide under section [2], but the linked RUU fails. Unfortunately it's a PVT3 device so I can't use some of the other options in the guide.

What does it say? Is it a radio fail?

blackcoffee85 said:
I'm following the steps in bortaks guide under section [2], but the linked RUU fails. Unfortunately it's a PVT3 device so I can't use some of the other options in the guide.
Click to expand...
Click to collapse
like abaaaabbbb63 said what fails? did u run the ruu but it failed? did u create a goldcard before running the ruu? why havnt u still not tried the 2.3gb upgrade? what does it say in bootloader? no one can help if u just post it failed.

Sorry, I wasn't being very clear.
I've tried the 2.3 GB from HTC and that fails with the 131 CID Error which is why I though that I needed to use a goldcard.
The Vodafone RUU (126338) that has the same version as the device (2.33.161.2) fails with 155 unknown error.
I'm going to try and make a goldcard and run the 2.3 from HTC.

blackcoffee85 said:
Sorry, I wasn't being very clear.
I've tried the 2.3 GB from HTC and that fails with the 131 CID Error which is why I though that I needed to use a goldcard.
The Vodafone RUU (126338) that has the same version as the device (2.33.161.2) fails with 155 unknown error.
I'm going to try and make a goldcard and run the 2.3 from HTC. I'm still looking for a way to get the CID from the SD card without a working HTC device. RealCID doesn't seem to work on my PC.
Click to expand...
Click to collapse
u shouldnt get cid error with the 2.3gb upgrade coz it bypasses the cid check, thats why it was suggested. u 100% sure u used the 2.3gb upgrade?

You were right, I have so many RUUs I was trying to flash the wrong one.
The 2.3 RUU flashes the recovery, radio, system image and then fails with Error [152]: IMAGE UPDATE ERROR.
Unplugging the device on the RUU's recover screen as instructed shows the RUU output:
[1] RADIO_V2 - FAIL PU
Items 2-9 are listed as OK
Partition update fail!
Update Fail!
Here's a photograph of the screen - http://imgur.com/PK5jBJb

What you have there is a radio brick. The only thing you can do now is repeat the RUU process with the 2.3 one, and hope that it will eventually work.

I thought as much.
It won't even install the 2.3 RUU now, fails with signature error. I'm at the 4 corners exclamation mark screen.