Develop Bugs

Flashed Vibrant back to original firmware (UGJG8) not rooted: PROBLEM

Now I have no network connection.
I can make calls, receive calls but I cannot do anything that requires data.
Under my phone status I see
Mobile Network State
Disconnected
I have tried factory resetting, battery pulls, reflashing original firmware... I am at my wits end. Anything ANYTHING to try would be awesome.
Like is there a way to force the connection back on??

go into settings, open APN, and add your phone login information to use internet

I am an idiot. Sorry:
For anyone else on Bell, here are the settings:
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none

can you mention how you got to open APN? I dont think i have that setting
Edit: your not the only idiot.. its under "wireless and network"-> mobile networks -> access point names

For better connection speeds, you might want to experiment with:
pda2.bell.ca (what iPhones are set to, I always see better speeds on this)
inet.bell.ca (which is the default APN on the Vibrant, and probably the least used across the network at the moment, speeds just a bit lower than pda2 in general, too close to call)
Then again, pda.bell.ca is reported to have problems tracking all your data usage, in your favour.

Cant connect to Rogers 3G

Im having trouble connecting to the rogers 3G network. I have flashed my phone numerous times and reset my APN settings a few times. I used the APN settings at this link
thekidd.ca/blog/tech/rogers-apn-settings
I have tried changing the network manually but when I select the 3G Rogers theres an error message that pops up at the bottom saying that my SIM wont allow it to connect.. But the 2G network it will connect to Just fine.
Any Ideas on how the hell to fix this? It was working for the last 2 months after i debranded. Until this sunday my 3G was working. I went to orientation for work and when i came out my battery was dead. I charged it and thats when it all went south. [email protected]

F4iRyder said:
Im having trouble connecting to the rogers 3G network. I have flashed my phone numerous times and reset my APN settings a few times. I used the APN settings at this link
thekidd.ca/blog/tech/rogers-apn-settings
I have tried changing the network manually but when I select the 3G Rogers theres an error message that pops up at the bottom saying that my SIM wont allow it to connect.. But the 2G network it will connect to Just fine.
Any Ideas on how the hell to fix this? It was working for the last 2 months after i debranded. Until this sunday my 3G was working. I went to orientation for work and when i came out my battery was dead. I charged it and thats when it all went south. [email protected]
Click to expand...
Click to collapse
Once when I flashed the generic ROM I used settings from this site and it worked for me
nexusoneforum.net/forum/rogers-discussion/3987-rogers-wireless-apn-settings-data-mms-here.html
Here are the settings:
MAKE SURE YOU SETUP TWO DIFFERENT APNS, ONE FOR DATA AND ONE FOR MMS!!!
Here are the settings for Data
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
Leave the rest blank. Now you Data should be working
Here are the settings Multimedia Messaging
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC :http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
APN Type: mms
Leave the rest blank. Now MMS should be working!
Click to expand...
Click to collapse

[Q] Enabling LTE on new Bell Samsung GS3

Hi there,
I just got a new GS3 in Edmonton and Wifi works great but it wont connect to the LTE network or any network for that matter. Once I turn wifi off I have no connection to any network. In settings under mobile network I have "auto mode" for GSM/HSPA/LTE networks enabled. I have a SIM card that says LTE on it.
Does anybody know how I can turn this one?
Cheers.

Are your apn settings there?
Galaxy SIII via XDA premium

Meeklobraca said:
Hi there,
I just got a new GS3 in Edmonton and Wifi works great but it wont connect to the LTE network or any network for that matter. Once I turn wifi off I have no connection to any network. In settings under mobile network I have "auto mode" for GSM/HSPA/LTE networks enabled. I have a SIM card that says LTE on it.
Does anybody know how I can turn this one?
Cheers.
Click to expand...
Click to collapse
Have you checked your apn settings?

Pop sim in and out, also as posted check your apn settings under network settings
Sent from my SGH-I747 using Tapatalk 2

SWave711 said:
Have you checked your apn settings?
Click to expand...
Click to collapse
I am in my APN settings. I assume it is the Access Point Names tab. When I click that tab it says "Browser, pda.bell.ca". When I click on that it opens ip a bunch of settings which I cant edit. It does say APN enabled though.

Meeklobraca said:
I am in my APN settings. I assume it is the Access Point Names tab. When I click that tab it says "Browser, pda.bell.ca". When I click on that it opens ip a bunch of settings which I cant edit. It does say APN enabled though.
Click to expand...
Click to collapse
So ive done some research into APN settings and I do have the correct settings.

Meeklobraca said:
I am in my APN settings. I assume it is the Access Point Names tab. When I click that tab it says "Browser, pda.bell.ca". When I click on that it opens ip a bunch of settings which I cant edit. It does say APN enabled though.
Click to expand...
Click to collapse
What carrier are you with? Bell? I am assuming it's a Bell phone LOCKED to Bell.
You definitely need ALL the specific settings for the APN. (the APN name is not important itself) I am on Rogers so I do not have your needed settings. Look around the forum or re ask the question for the APN details. Someone who uses Bell can help.

I found the settings:
Bell Mobility:
APN Name: Bell LTE
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: h.t.t.p.://mms.bell.ca/mms/wapenc
MMSC proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type : <Not set>
So i tried "restore to defaults" and it loaded up with all of this information, except the Proxy: web.wireless.bell.ca or the Port: 80
When i tried New APN with these settings it did not work and when I rebooted the device it erased the new APN I added.

When change your apn setting ,do not forget to save them using your menue button, on bottom left of your phone.

READ FORUM RULES BEFORE POSTING
You checked "yes this is a question"
Guess where it goes
Moved to Q&A
Friendly Neighborhood Moderator

Meeklobraca said:
Hi there,
I just got a new GS3 in Edmonton and Wifi works great but it wont connect to the LTE network or any network for that matter. Once I turn wifi off I have no connection to any network. In settings under mobile network I have "auto mode" for GSM/HSPA/LTE networks enabled. I have a SIM card that says LTE on it.
Does anybody know how I can turn this one?
Cheers.
Click to expand...
Click to collapse
This happened to me so I took the phone back and they gave me a new SIM card and it worked perfect, it was just a bad SIM.
Sent from my phone through the dark abyss known as "The Internet"

No network on US version with ATT

Hi, I was wondering if anyone else had a similar problem or can help with a solution. I just got my Oppo 7 (love this thing) but it seems the network doesn't work properly. The network seems to be picked up just fine, full bars, under network settings it automatically acquires the APN settings and everything, but I can't do anything over the air without WiFi. As soon as the WiFi is gone, I can't browse the internet, send or receive text messages, etc. What do?

Will this help? Won't be LTE, but H+ (my phone doesn't have LTE)
APN: att.mvno
Proxy : wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Port: 80
MCC: 310
MMC: 410
APN Type: default,supl,mms
APN Protocol: IPv4
APN Roaming: IPv4

Chuteboxe39 said:
Hi, I was wondering if anyone else had a similar problem or can help with a solution. I just got my Oppo 7 (love this thing) but it seems the network doesn't work properly. The network seems to be picked up just fine, full bars, under network settings it automatically acquires the APN settings and everything, but I can't do anything over the air without WiFi. As soon as the WiFi is gone, I can't browse the internet, send or receive text messages, etc. What do?
Click to expand...
Click to collapse
I have mine set up on T Mobile and I'm having the same problem. It's pretty annoying. I've tried a factory reset to no avail. My phone downloaded an update this morning which I hoped would fix the problem, but it looks like it hasn't.

Chuteboxe39 said:
Hi, I was wondering if anyone else had a similar problem or can help with a solution. I just got my Oppo 7 (love this thing) but it seems the network doesn't work properly. The network seems to be picked up just fine, full bars, under network settings it automatically acquires the APN settings and everything, but I can't do anything over the air without WiFi. As soon as the WiFi is gone, I can't browse the internet, send or receive text messages, etc. What do?
Click to expand...
Click to collapse
That's odd. There's one thing wrong with this device on stock - its APN database for AT&T is 3-4 years out of date. It was still using the wap.cingular APN when I turned mine on.
You need to manually put in the AT&T LTE APN (pta). ALSO if you've never owned an LTE device before you'll need to talk to AT&T to have your account updated. (Using the pta APN with a Nexus 5 resulted in no data for me too until I had my plan/account updated. You can do this without an actual contract change - for example I'm still grandfathered in to "unlimited data"). In general I would recommend doing this in-person at an AT&T-owned store, not at the phone and not at a franchisee (like most small mall kiosks).

Thanks for the reply everyone, I entered in the new ATT HSPA+ APN and it works like a charm now.

Could you post your settings?. I confirmed the SIM I got yesterday was lte capable but still no dice.
Sent from my X9006 using XDA Free mobile app

jgunna405 said:
Could you post your settings?. I confirmed the SIM I got yesterday was lte capable but still no dice.
Sent from my X9006 using XDA Free mobile app
Click to expand...
Click to collapse
Just putting in the pta APN with no other info was enough for me.
(MMS is probably borked for me until I fill in the right settings for it but I use MMS maybe once every 3 years at most.)

Entropy512 said:
Just putting in the pta APN with no other info was enough for me.
(MMS is probably borked for me until I fill in the right settings for it but I use MMS maybe once every 3 years at most.)
Click to expand...
Click to collapse
I just realized that you were in here Entropy. I appreciate the work you did with the Galaxy S2 (last phone I had before this one). Do you plan on doing any dev work with this one or are you going to take it easy?
mmsc: http://mmsc.mobile.att.net
mms proxy: proxy.mobile.att.net
mms port: 80
apn type: default,mms.supl
That's what I have currently and mms works fine.

jgunna405 said:
I just realized that you were in here Entropy. I appreciate the work you did with the Galaxy S2 (last phone I had before this one). Do you plan on doing any dev work with this one or are you going to take it easy?
mmsc: http://mmsc.mobile.att.net
mms proxy: proxy.mobile.att.net
mms port: 80
apn type: default,mms.supl
That's what I have currently and mms works fine.
Click to expand...
Click to collapse
I'm working on lighting up omni. Oppo sent us a few devices.
Thanks for the MMS info, I should stick that into my device.

jgunna405 said:
I just realized that you were in here Entropy. I appreciate the work you did with the Galaxy S2 (last phone I had before this one). Do you plan on doing any dev work with this one or are you going to take it easy?
mmsc: http://mmsc.mobile.att.net
mms proxy: proxy.mobile.att.net
mms port: 80
apn type: default,mms.supl
That's what I have currently and mms works fine.
Click to expand...
Click to collapse
I pulled the APN configs for ATT Phone APN from omni's github (I updated it a few months back to what it was from an AT&T stock TouchWiz Galaxy S4 ROM, so it this is update-to-date afaik)
I've bolded the ones that you actually need to touch, otherwise, don't touch them
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,subl,mms,hipri (no spaces between them!!!!)
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled (this should be grayed out anyway)
Bearer: Unspecified

jakew02 said:
I pulled the APN configs for ATT Phone APN from omni's github (I updated it a few months back to what it was from an AT&T stock TouchWiz Galaxy S4 ROM, so it this is update-to-date afaik)
I've bolded the ones that you actually need to touch, otherwise, don't touch them
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,subl,mms,hipri (no spaces between them!!!!)
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled (this should be grayed out anyway)
Bearer: Unspecified
Click to expand...
Click to collapse
I have this as my settings now and still only get H+. (except for the mmsc, you have 3 m's)
Weird thing is that I get 0 connection when I change from phone to pta.
Not sure if locale is the culprit. I'm in Oklahoma City.
Sent from my X9006 using XDA Free mobile app

jgunna405 said:
I have this as my settings now and still only get H+. (except for the mmsc, you have 3 m's)
Weird thing is that I get 0 connection when I change from phone to pta.
Not sure if locale is the culprit. I'm in Oklahoma City.
Sent from my X9006 using XDA Free mobile app
Click to expand...
Click to collapse
whoops made a typo, yea it's only 2 m's in mmsc
try applying ATT Phone apn and rebooting,,
that's weird. did you call AT&T to confirm that you have the LTE data package on your account like Entropy512 stated ?

jakew02 said:
whoops made a typo, yea it's only 2 m's in mmsc
try applying ATT Phone apn and rebooting,,
that's weird. did you call AT&T to confirm that you have the LTE data package on your account like Entropy512 stated ?
Click to expand...
Click to collapse
I went to the ATT store, but they weren't any help. They confirmed that the SIM they gave me was lte compatible, but I assumed that's the same thing as having an LTE data package. I'll give them a call tonight and let you all know. (btw, just re-applied your settings and still no luck)
edit: called.. and they claim that all accounts have lte compatibility now and of course she had never heard of the OF7a

The settings entropy posted were the exact settings my N5 had which I copied over and worked fine. One thing to be aware of is that mine says 4G on LTE and then either H or H+ for those, not sure if this applies only to my service area or what and another might show differently. At any rate if you're getting 4G showing you might wanna run speedtest and see if you are getting LTE.

jgunna405 said:
I went to the ATT store, but they weren't any help. They confirmed that the SIM they gave me was lte compatible, but I assumed that's the same thing as having an LTE data package. I'll give them a call tonight and let you all know. (btw, just re-applied your settings and still no luck)
edit: called.. and they claim that all accounts have lte compatibility now and of course she had never heard of the OF7a
Click to expand...
Click to collapse
AT&T's SIMs have been LTE compatible for years, even before AT&T had an LTE network. I need to check to be sure, but I'm fairly certain my SIM is still the original "cut down SIM" that I've had since 2011 at least.
It's your account that needs to be LTE-enabled.
Don't call. Phone support is awful. Go to a corporate-owned AT&T physical store. That's where the competent staff are.
(In my case, I originally did the LTE upgrade on a Nexus 5 - if you put a SIM into a Nexus 5 that doesn't have LTE on the account, you'll get a text message saying to call AT&T.)

HELP!! Unlocked Verizon LG G3 to T-Mobile APN Settings?

I purchased an unlocked Verizon LG G3. I am trying to figure out what APN settings to use. I have searched all over and various other threads suggests different settings.
Here are the issues I have in most of the settings I've used: Poor signal, Internet but unable to download MMS, or no internet but text service. I also tried enabling roaming. So what settings do I use??
Here is what I have now:
Name: T-Mobile US LTE
APN: fast.t-mobile.com
Proxy: Not set
Port: Not set
Username: Not Set
Password: Not Set
Server:Not Set
MMSC:Not Set
MMS Proxy:Not set
MCC:310
MNC:260
Authentication Type: Not set
APN Type: not set
APN Protocol:IPv4/IPv6
These settings give me service but I am getting between one to three bars. When I used to get full bars on my t-mobile g2.

javydiaz97 said:
I purchased an unlocked Verizon LG G3. I am trying to figure out what APN settings to use. I have searched all over and various other threads suggests different settings.
Here are the issues I have in most of the settings I've used: Poor signal, Internet but unable to download MMS, or no internet but text service. I also tried enabling roaming. So what settings do I use??
Here is what I have now:
Name: T-Mobile US LTE
APN: fast.t-mobile.com
Proxy: Not set
Port: Not set
Username: Not Set
Password: Not Set
Server:Not Set
MMSC:Not Set
MMS Proxy:Not set
MCC:310
MNC:260
Authentication Type: Not set
APN Type: not set
APN Protocol:IPv4/IPv6
These settings give me service but I am getting between one to three bars. When I used to get full bars on my t-mobile g2.
Click to expand...
Click to collapse
On APN type add "default,supl,mms"
Without the quotes.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
On APN type add "default,supl,mms"
Without the quotes.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Thank you.
It seemed to get better, now it is staying at 3 bars, however now I have another issue. MY data is always on even if I disable it.

javydiaz97 said:
Thank you.
It seemed to get better, now it is staying at 3 bars, however now I have another issue. MY data is always on even if I disable it.
Click to expand...
Click to collapse
That is weird. I have not seen that before. I would recommend updating your phone if not updated to the latest version. If you are in the latest version you might have to factory reset your phone.
Sent from my LG-D800 using Tapatalk