Related
I have followed a few different guides regarding this and RUU will not find my phone. I have ran the program about 10 times and it just wont seem to find it. Also, it takes about 15 minutes for the program to tell me it can not find my phone. I have no idea why it takes so log to NOT find anything, LOL. is there another way to restore it or am i out of luck?
PS. I have rooted with unrevoked3. I need to return my phone so i need to completely stock.
EVOvillain said:
I have followed a few different guides regarding this and RUU will not find my phone. I have ran the program about 10 times and it just wont seem to find it. Also, it takes about 15 minutes for the program to tell me it can not find my phone. I have no idea why it takes so log to NOT find anything, LOL. is there another way to restore it or am i out of luck?
PS. I have rooted with unrevoked3. I need to return my phone so i need to completely stock.
Click to expand...
Click to collapse
In order to get back to Stock you need do this first http://forum.xda-developers.com/showthread.php?t=701835 Step 2 and 3.
(Be sure you mark usb debugging) After finish it, turn off the phone press volume down and power to Bootloader screen
wait until load hboot, then in fastboot plug the usb and press power botton and will change to fastboot USB, Then run the RUU. http://shipped-roms.com/shipped/Supersonic/
Good Luck!!
Ps: I got same issue when i began root and unroot but after practice is a piece of cake.
thanks a lot m8. ill give it a shot. hopefully it works because i need to turn my phone in soon.
EDIT: how and where do I enter this code? sorry, im a noob.
Code:
adb shell
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image misc /sdcard/mtd-eng.img
EVOvillain said:
thanks a lot m8. ill give it a shot. hopefully it works because i need to turn my phone in soon.
EDIT: how and where do I enter this code? sorry, im a noob.
Code:
adb shell
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image misc /sdcard/mtd-eng.img
Click to expand...
Click to collapse
First you need put in you sd card the flash-image and mtd-eng.img .Be sure you mark usb debugging . Then you need use the adb shell. I recommend download evo-recovery http://link.geekfor.me/evorecovery decompress and put in you c: drive then open Command Prompt - and type first
cd c:\evo-recovery
will show up c:\evo-recovery next to this type adb-windows shell
will show up a # sign (if you got $ you unrooted)
after # singn type : (line by line)
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image misc /sdcard/mtd-eng.img
Put the PC36IMG in you Sd card and follow the intruction to step 3
Good luck!!
I did what you say but my phone does not recognize the PC36IMG file.
did you make sure the PC36IMG file DOES NOT have .zip on the end...the name of the file should be just PC36IMG.
If it is named PC36IMG.zip and you hide file extensions on your computer, the file is actually named PC36IMG.zip.zip
EVOvillain said:
I did what you say but my phone does not recognize the PC36IMG file.
Click to expand...
Click to collapse
When you did step 2 and type line by line , last line doesnt give you error?
If you continue with same issue with PC36IMG.ZIP, and because you got unrevoked3 , try flash first 147.651.1 stock root.zip here:http://www.mediafire.com/?n2zrnymmdmn Then try again step 2 and 3 in the top of this thread. That's work for me when i tested before unrevoked3
Good Luck
cocobongo77 said:
In order to get back to Stock you need do this first http://forum.xda-developers.com/showthread.php?t=701835 Step 2 and 3.
(Be sure you mark usb debugging) After finish it, turn off the phone press volume down and power to Bootloader screen
wait until load hboot, then in fastboot plug the usb and press power botton and will change to fastboot USB, Then run the RUU. http://shipped-roms.com/shipped/Supersonic/
Good Luck!!
Ps: I got same issue when i began root and unroot but after practice is a piece of cake.
Click to expand...
Click to collapse
Thanks nice piece of info to have just in case
EVOvillain said:
I did what you say but my phone does not recognize the PC36IMG file.
Click to expand...
Click to collapse
yea thats not a problem at all you probably just have the file named PC36IMG.zip.zip. remove one ".zip", your computer is probably just hiding the extension.
If anyone is advanced enough to root their phone and flash ROMS< kernels, etc, then they should be advanced enough to go to Folder Options and uncheck Hide File Extensions on their computer....
Pretty easy did it 6 times for lots of people u can find the latest ru build pc36img on xda just look for it then get unrevoked forever son from there site when u get that flash it turns s on then get and place the latest ruu build on SD card go into boot loader and let it do its thing bingo stock pm me man if you need more help. Don't forget to delete the unrevoked file from SD card or the pc36img when your done.
Ps don't try those auto programs they can be a hassle.
EVOvillain said:
I have followed a few different guides regarding this and RUU will not find my phone. I have ran the program about 10 times and it just wont seem to find it. Also, it takes about 15 minutes for the program to tell me it can not find my phone. I have no idea why it takes so log to NOT find anything, LOL. is there another way to restore it or am i out of luck?
PS. I have rooted with unrevoked3. I need to return my phone so i need to completely stock.
Click to expand...
Click to collapse
HERE you go man get unrevoked forever son from there site and download this Ruu the one at the bottom is the latest build.
http://shipped-roms.com/index.php?category=android&model=Supersonic
hope this helps.
Fastest and easiest trouble free way man done it alot.
Easiest way to Unroot:
http://forum.xda-developers.com/showthread.php?t=829045
Scroll down a little.
HTC Desire USB Bricked Without Root
Hey guys, got a really tricky one for you here...
Some people may have seen a thread I posted the other day about problems that had arisen with my HTC Desire, well I have managed to find out that these problems are being caused by a USB Brick.
As of now I have managed to restore SD Functions however my phone will still not connect to the computer, and the phone won't recieve a network signal from Orange.
I read through this tutorial here and also this one here. My problem is, all the requirements of the fix, my device does not meet. My phone is not rooted, it is running the latest software and has the latest HBoot.
I also found this that looked very promising, however when I tried to log into my Google account on my phone, everytime it said it couldn't make a connection, I left it for a few hours and the same thing, I can't help but think this is due to the USB brick?
I just really need some help, is there anything I can do to restore USB functionality? The phone is being sent to HTC tomorrow, however I can cancel at any point. Please, I know there are so many amazing people on XDA that can help me. Thankyou
*UPDATE* - After using the Fastboot code to enable the SD Card, my Sim Card is now working. I have been able to log into my G-Mail account and download the terminal emulator which is an apparent fix in one of the posts I linked above, however this doesn't work. Please can someone help me
hy did you try to reinstal the software ???? the original os or an upgrade??
en_mih said:
hy did you try to reinstal the software ???? the original os or an upgrade??
Click to expand...
Click to collapse
I have done a factory reset, re-installed the PB99IMG and also flashed an RRU. All the problems persist
Really need help with this guys! E-Mail - [email protected]
jaaystott said:
Really need help with this guys! E-Mail - [email protected]
Click to expand...
Click to collapse
Hi.
If I understand well, you have got an USB brick, and your current situation is the following :
No S-OFF hboot, no ROOTED ROM, but SDCard reenabled, thanks to "fastboot oem enableqxdm 0" command in fastboot mode.
I'll try to drive you through the whole process for getting your phone back, since I've already encoutered this situation, and successfully solved it.
First step => Get a 'mtd0.img' file :
Go to "Menu>Settings>About phone>Software information>Kernel version", and write down your ROM version (2.6.32.15, for example)
Then, in fastboot mode, with USB cable connected to your PC, issue the following command
Code:
fastboot getvar cid
You should see your phone's CID, something like 'HTC__022'.
You then go to this site, provide both information 'cid' and 'rom version', and you'll get a 'mtd0.img' file.
Let me know when you've gone through this first step
leinad said:
Hi.
If I understand well, you have got an USB brick, and your current situation is the following :
No S-OFF hboot, no ROOTED ROM, but SDCard reenabled, thanks to "fastboot oem enableqxdm 0" command in fastboot mode.
I'll try to drive you through the whole process for getting your phone back, since I've already encoutered this situation, and successfully solved it.
First step => Get a 'mtd0.img' file :
Go to "Menu>Settings>About phone>Software information>Kernel version", and write down your ROM version (2.6.32.15, for example)
Then, in fastboot mode, with USB cable connected to your PC, issue the following command
Code:
fastboot getvar cid
You should see your phone's CID, something like 'HTC__022'.
You then go to this site, provide both information 'cid' and 'rom version', and you'll get a 'mtd0.img' file.
Let me know when you've gone through this first step
Click to expand...
Click to collapse
Hi,
I am very much interested in knowing about the complete procedure. Assuming we have done this first step, how to proceed from here?
HQRaja said:
Hi,
I am very much interested in knowing about the complete procedure. Assuming we have done this first step, how to proceed from here?
Click to expand...
Click to collapse
Next step will aim at flashing this 'mtd0.img' file onto the 'misc' partition.
Since we are S-ON, and the ROM is not rooted, we'll have to get temp root access. To do so, follow the steps below.
1.- Download the two files rageagainstthecage.tgz and flash_image, extract rageagainstthecage-arm5.bin, and copy rageagainstthecage-arm5.bin, flash_image, and the file mtdo.img at the root of your SD using any SD card adapter.
2.-Install 'Terminal Emulator' (free app on the Android Market) on your phone
3.- Issue the following commands from Terminal Emulator
Code:
cat /sdcard/rageagainstthecage-arm5.bin > /data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
cat /sdcard/flash_image > /data/data/jackpal.androidterm/flash_image
cat /sdcard/mtd0.img > /data/data/jackpal.androidterm/mtd0.img
cd /data/data/jackpal.androidterm/
chmod 755 rageagainstthecage-arm5.bin flash_image
This will copy all three files to the right directory on your phone, and give exec rights to the files.
4.- Then run the program rageagainstthecage-arm5.bin from the Terminal Emulator
Code:
/data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
in order to get temp root access. Be aware that the phone will have some kind of erratic behavior, and will seem to crash.
5.- Quit Terminal Emulator, stop it (Menu>Settings>Applications>Manage applications>Terminal Emulator>Force stop), and relaunch it. You should see a pretty # character, indicating you've got temp root access.
6.- You then issue the following commands, in order to flash the misc partition of your phone with the correct mtd0.img file
Code:
cd /data/data/jackpal.androidterm/
./flash_image misc mtd0.img
7.- Reboot your phone, and enjoy !!!
PS : All credits come to Antubis, from the French forum FrAndroid, who posted a very clever tuto in french
leinad said:
Next step will aim at flashing this 'mtd0.img' file onto the 'misc' partition.
Since we are S-ON, and the ROM is not rooted, we'll have to get temp root access. To do so, follow the steps below.
1.- Download the two files rageagainstthecage.tgz and flash_image, extract rageagainstthecage-arm5.bin, and copy rageagainstthecage-arm5.bin, flash_image, and the file mtdo.img at the root of your SD using any SD card adapter.
2.-Install 'Terminal Emulator' (free app on the Android Market) on your phone
3.- Issue the following commands from Terminal Emulator
Code:
cat /sdcard/rageagainstthecage-arm5.bin > /data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
cat /sdcard/flash_image > /data/data/jackpal.androidterm/flash_image
cat /sdcard/mtd0.img > /data/data/jackpal.androidterm/mtd0.img
cd /data/data/jackpal.androidterm/
chmod 755 rageagainstthecage-arm5.bin flash_image
This will copy all three files to the right directory on your phone, and give exec rights to the files.
4.- Then run the program rageagainstthecage-arm5.bin from the Terminal Emulator
Code:
/data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
in order to get temp root access. Be aware that the phone will have some kind of erratic behavior, and will seem to crash.
5.- Quit Terminal Emulator, stop it (Menu>Settings>Applications>Manage applications>Terminal Emulator>Force stop), and relaunch it. You should see a pretty # character, indicating you've got temp root access.
6.- You then issue the following commands, in order to flash the misc partition of your phone with the correct mtd0.img file
Code:
cd /data/data/jackpal.androidterm/
./flash_image misc mtd0.img
7.- Reboot your phone, and enjoy !!!
PS : All credits come to Antubis, from the French forum FrAndroid, who posted a very clever tuto in french
Click to expand...
Click to collapse
I already tried this process, it didn't work, when I did the RageAgainstTheCage command, it said searching for ADB, then something about not being able to find it, then when I restart the terminal and do the final command, it says permission denied -_-
jaaystott said:
I already tried this process, it didn't work, when I did the RageAgainstTheCage command, it said searching for ADB, then something about not being able to find it, then when I restart the terminal and do the final command, it says permission denied -_-
Click to expand...
Click to collapse
In order for rageagainstthecage to find adb process, you should tick 'USB debugging' in "Menu>Settings>Applications>Development>"
leinad said:
In order for rageagainstthecage to find adb process, you should tick 'USB debugging' in "Menu>Settings>Applications>Development>"
Click to expand...
Click to collapse
I could have fixed this myself aswell :| **** i just sent off my HTC Desire 30 seconds ago, no joke, the UPS guy just came and got it
jaaystott said:
I could have fixed this myself aswell :| **** i just sent off my HTC Desire 30 seconds ago, no joke, the UPS guy just came and got it
Click to expand...
Click to collapse
:-( (10 characters)
leinad said:
:-( (10 characters)
Click to expand...
Click to collapse
I really appreciate the help you gave me mate, even if I asn't able to fix my device, thankyou for the time.
leinad said:
Next step will aim at flashing this 'mtd0.img' file onto the 'misc' partition.
Since we are S-ON, and the ROM is not rooted, we'll have to get temp root access. To do so, follow the steps below.
1.- Download the two files rageagainstthecage.tgz and flash_image, extract rageagainstthecage-arm5.bin, and copy rageagainstthecage-arm5.bin, flash_image, and the file mtdo.img at the root of your SD using any SD card adapter.
2.-Install 'Terminal Emulator' (free app on the Android Market) on your phone
3.- Issue the following commands from Terminal Emulator
Code:
cat /sdcard/rageagainstthecage-arm5.bin > /data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
cat /sdcard/flash_image > /data/data/jackpal.androidterm/flash_image
cat /sdcard/mtd0.img > /data/data/jackpal.androidterm/mtd0.img
cd /data/data/jackpal.androidterm/
chmod 755 rageagainstthecage-arm5.bin flash_image
This will copy all three files to the right directory on your phone, and give exec rights to the files.
4.- Then run the program rageagainstthecage-arm5.bin from the Terminal Emulator
Code:
/data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
in order to get temp root access. Be aware that the phone will have some kind of erratic behavior, and will seem to crash.
5.- Quit Terminal Emulator, stop it (Menu>Settings>Applications>Manage applications>Terminal Emulator>Force stop), and relaunch it. You should see a pretty # character, indicating you've got temp root access.
6.- You then issue the following commands, in order to flash the misc partition of your phone with the correct mtd0.img file
Code:
cd /data/data/jackpal.androidterm/
./flash_image misc mtd0.img
7.- Reboot your phone, and enjoy !!!
PS : All credits come to Antubis, from the French forum FrAndroid, who posted a very clever tuto in french
Click to expand...
Click to collapse
Thanks, will feature your method in a guide at my blog (while giving you and Antubis full credit for it of course). =)
trying to follow your guide to restore my phone to work again! having trouble though...
i have got to the point of installing terminal emulator but at the point of issuing second cat command it says no such file or directory..
moley10 said:
trying to follow your guide to restore my phone to work again! having trouble though...
i have got to the point of installing terminal emulator but at the point of issuing second cat command it says no such file or directory..
Click to expand...
Click to collapse
I found a way around this, as I was having the same problem. Try This ->
cat /sdcard/rageagainstthecage-arm5.bin > data/data/rageagainstthecage-arm5.bin
Do that for the two other commands that follow that, then follow the instructions as given, that should work.
HQRaja said:
Thanks, will feature your method in a guide at my blog (while giving you and Antubis full credit for it of course). =)
Click to expand...
Click to collapse
Link to your blog? =)
ok, so i did that, no longer got errors.. seemed to work but after reboot still the same, doesnt connect to my pc, and device manager it is still being shown as 'qualcomm cdma technologies msm' in other devices!
is the purpose of those commands to moved the files to certain directory? i can get temp root with visionary to perhaps just move the files in root explorer?
thanks for all the help. its much appreciated!
Hello,
I've got a similar problem but this solutions doesn't work for me, because I cannot create a CID.
Any ideas?
Thanks in advance
hi,
i managed to create files etc and still am stuck with the same problem... searched hi and low for days,
hopefully someone will be able to find us a solution..
You mean creating the mtd from that site? Thats because you need to type the Build Number not the kernel version.
This guide is now obsolete. Please use this guide instead.
For Gingerbread Phones, Please use this guide.
Hey guys, this is probably the easiest guide to follow for rooting a branded desire Z. The reason why this can sometimes be hard is cause it uses a unique identifier (INFOCID) and the companies that brand the phones ONLY want roms from their company on them. This stops us from using a WWE rom like every else to downgrade and then root.
But ultimately, the reason I'm making this is because every other guide I've read constantly links you to other guides or other pages and it sorta annoyed me. So after I figured it all out I posted one concise guide that doesn't redirect you 50 times.
Now I’m gonna run you through EVERYTHING so you won’t get stuck anywhere.
This guide will work with:
Device: Desire Z or G2
Firmware Version: Any Firmware version will be fine (All you need to do is downgrade using step 1)
Android Version: Froyo or any previous variation of Android (Absolutely no gingerbread device will root with this method)
Btw, I take no responsibility for any damage taken by using these procedures. Sorry =P
Also if you don't have ADB and Fastboot set up then go ahead and follow the guides on the first two posts here. -Thanks nephron
g4b4g3 said:
If your INFOCID is NOT one of these you need to make a goldcard to downgrade!
HTC__001
HTC__032
HTC__E11
HTC__203
HTC__Y13
HTC__102
HTC__405
HTC__304
HTC__A07
HTC__N34
HTC__J15
Which can be checked by typing the following two commands:
adb reboot bootloader
fastboot oem boot
Click to expand...
Click to collapse
If your CID matches one of the CID's above then you can skip Step 1.
1. Creating a Goldcard:
Prerequisites:
ADB Set up and running fine (to check if it is working just connect your phone and have USB debugging enabled. Then type adb devices in your CMD Prompt)
HxD Hex Editor (see attachments of post 1)
USB Debugging enabled on your phone
1.Firstly we need to mount the memory card on a windows PC.
2. Format the memory card as FAT32 using all the default options.
3. Mount the memory card on your Phone. Then give it a couple of seconds.
4. Remount the memory card on your PC.
5. Find your CID by using the follow command in your cmd prompt (YOU NEED ADB)
Code:
adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid
6. Use the excel sheet provided to reverse the CID (see Attachments)
7. Goto this website and send yourself a goldcard.img
http://psas.revskills.de/?q=goldcard
8. Run HxD hex editor AS AN ADMINISTRATOR! (I can’t stress how important having admin rights is)
9. Go to Extras > Open Disk Image. Then select your goldcard.img
10. Go to Extras > Open Disk. IMPORTANT: Select your memory card UNDER the Physical Drives category. DO NOT open the logical drive.
11. Switch to your goldcard.img tab. Go to Edit > Select All. Then Edit > Copy.
12. Go to the physical drive tab and select the lines 00000000 until you get to the one with 00000170.
13. Go To Edit > Paste Write.
14. You should have a huge block of red characters now. This is good btw.
15. Mount your SD card on your Phone and let it detect it. If it comes up with a corrupt SD card error you have done it wrong and you may have to start over.
16. You are done with the goldcard.
2. Downgrading and Debranding
Before you start this please do the following:
1a. Download the RUU I’ve linked (it should be a ~300mb exe file) -Thanks g4rb4g3
ii. If you are a BELL User. Please download this RUU instead.
1b. Run the setup until you get to the screen with the tick boxes (Some Users may have to run this as an Administrator)
1c. Leave the setup running and go to C:\Users\<your account name>\AppData\local\temp ( Or Try %AppData%\Local\Temp\ ). Then right click and Sort By Date Modified. Look for the most recently created folder which should look like {xxxxxxx-xxxxxx-xxxxxxxx}. Then navigate into it and its then into its one folder. Look for rom.zip and copy that to your goldcard/memory card.
1d. Rename the rom.zip on your memory card to PC10IMG.zip (Make sure it is exactly the same as the way I've typed it there)
1e. Mount your sd card back onto your phone.
2. Download the attachments (misc_version & psneuters) and extract them in a folder like C:\RootVision\
Now you are ready to begin:
1. Open a CMD prompt window
2. Navigate your way to the folder with psneuter & misc_version IN CMD PROMPT. (So the cmd prompt window should be something like this C:\RootVision> )
3. Now we will use the following 5 commands one after the other
Code:
adb push psneuter /data/local/tmp
adb push misc_version /data/local/tmp
adb shell chmod 777 /data/local/tmp/psneuter
adb shell chmod 777 /data/local/tmp/misc_version
adb shell /data/local/tmp/psneuter
adb shell
4. After the last command you should have a # and a flashing line for you to enter text. This is good. (If you get a $ you have done it wrong and should try typing the commands out again)
5. Now you have the # type the following command in: (This will spoof the radio version)
Code:
/data/local/tmp/misc_version –s 1.33.405.5
Then go ahead and type:
Code:
exit
6. Type this command into your cmd prompt (btw you should be back with the normal C:\RootVision>)
Code:
adb reboot bootloader
7. Once on your white screen with colourful text you can go ahead and press the power button ONCE
8. Now just wait for the rom to install and verify. If you get INCORRECT CID your gold card doesn’t work or your CID doesn't match and you'll need a goldcard. (Go to Step 1. and make a goldcard for your phone)
9. Go ahead and install the rom when it asks you.
10. You are done downgrading and can now begin the Rooting process.
See Post 2 For Rooting
Assuming all as gone well and you now have a rom without superuser but you have a baseband version that is 1.34xxxx.
Alright, let’s begin.
Prerequisites:
Download psneuter
Download gfree 0.5
Download root_psn
Download flash_image
Download the Desire Z hboot
Download Clockwork Recovery
ALL of these are in the attachments section
They all should be extracted into the same folder. Use something simple like C:\RootVision\Root
3. Root your Desire Z!
Before you start:
Enable USB Debugging and Allow Unknown Market Installations again.
Also delete the PC10IMG.zip on your phone if you downgraded.
Okay lets go:
1. Now Assuming you succeeded at the last part you should have a stock-ish rom without superuser. What we want to do is start by pushing all the files across with the following adb commands (use in cmd prompt the same way you pushed files in 2.)
Code:
adb push psneuter /data/local/tmp/
adb push gfree /data/local/tmp/
adb push busybox /data/local/tmp/
adb push root_psn /data/local/tmp/
adb push flash_image /data/local/tmp/
adb push su /sdcard/
adb push hboot-eng.img /data/local/tmp/
adb push Superuser.apk /sdcard/
adb shell chmod 755 /data/local/tmp/*
2. Alright now we have all the files we need to root the phone. Input the following command. This is just putting our clockwork recovery in a convenient place with an easy name.
Code:
adb push recovery-clockwork-3.0.2.4-vision.img /data/local/tmp/recovery.img
3. Now we’re gonna temp root again by typing in the following:
Code:
adb shell /data/local/tmp/psneuter
adb shell
4. This should leave us with another #. Now enter the following commands:
Code:
cd /data/local/tmp
./gfree -f -b hboot-eng.img
./flash_image recovery recovery.img
./root_psn
sync
5. Type in: (thanks for the correction john_d1974)
Code:
reboot
6. You should have a rooted phone with superuser after the reboot. Also it will have clockworkmod, SuperCID, secu-flag off & an Unlocked HBOOT-ENG.
If gfree 0.5 doesnt work for you then this section is for you:
Prerequisites:
Download psneuter
Download gfree 0.2
Download root_psn
Download flash_image
Download the Desire Z hboot
Download Clockwork Recovery
ALL of these are in the attachments section
They all should be extracted into the same folder. Use something simple like C:\RootVision\Root
1. Now Assuming you succeeded at the last part you should have a stock-ish rom without superuser. What we want to do is start by pushing all the files across with the following adb commands (use in cmd prompt the same way you pushed files in 2.)
Code:
adb push psneuter /data/local/tmp/
adb push gfree /data/local/tmp/
adb push busybox /data/local/tmp/
adb push root_psn /data/local/tmp/
adb push flash_image /data/local/tmp/
adb push su /sdcard/
adb push hboot-eng.img /data/local/tmp/
adb push Superuser.apk /sdcard/
adb shell chmod 755 /data/local/tmp/*
2. Alright now we have all the files we need to root the phone. Input the following command. This is just putting our clockwork recovery in a convenient place with an easy name.
Code:
adb push recovery-clockwork-3.0.2.4-vision.img /data/local/tmp/recovery.img
3. Now we’re gonna temp root again by typing in the following:
Code:
adb shell /data/local/tmp/psneuter
adb shell
4. This should leave us with another #. Now enter the following commands:
Code:
cd /data/local/tmp
./gfree -f
./flash_image recovery recovery.img
./root_psn
sync
5. Type in: (thanks for the correction john_d1974)
Code:
reboot
6. You should have a rooted phone with superuser after the reboot. Also it will have clockworkmod, SuperCID and secu-flag off.
4. Installing your own custom ROM
This section is just in case you don't know how to install a custom ROM.
Note: Always make sure the ROM you are installing is FOR YOUR PHONE! If you install a ROM meant for another phone you could potentially damage it or brick the phone itself.
1. Download the ROM you want and copy it to your SD Card. (Try to keep it in a folder that is easy to get to)
2. Turn off your phone.
3. Hold down the volume down button and then press the Power Button. This should take you to a white screen with lots of colourful text. One of which says FASTBOOT or FASTBOOT_USB.
4. Press the power button ONCE when BOOTLOADER is selected(BLUE)
5. Navigate using the volume buttons until you get to RECOVERY and then press the Power Button again.
6. The HTC Logo will come up then you will get a black screen with text.
7. From here you should Always do a NANDROID Backup so you can restore a working ROM if something fails.
NANDROID Backup
7a. Navigate to 'backup and restore' and then select it by pressing the trackpad button.
7b. Select 'Backup' and then let it finish. Once done you have a backup of your android.
8. Now you want to do these before you start installing:
a. 'wipe data/factory reset
b. 'wipe cache partition'
c. Go into 'advanced' and select 'Wipe Dalvik Cache'
9. Now you can install the ROM itself. This is done by selecting 'install zip from sdcard' in the main menu. Now you can select 'choose zip from sdcard' and just go ahead and select the ROM you copid to your sd card earlier.
9a. If the phone says verification failed then just toggle the signature verification option.
FAQ - For Anyone with any issues.
1. My version is 1.7xxxx or higher. Can I use this method?
Yes you can. This method will downgrade your phone to 1.34 so your radio is no longer locked thereby allowing you remove the secu-flag, add superCID and allow you to install a custom recovery (like ClockWorkMod)
2. My CID is XXXXXXXX and isn't on that list, will this method still work?
Yes it will. The reason why it will work is because a goldcard is essentially a manufacturers way of bypassing the CID checks used by ROMs. Therefore, by creating our own unique goldcards we can also bypass the CID check.
3. My CID is on the list that you mentioned. Do I need this goldcard?
No, you can skip the 1st step because when the ROM checks your phones CID it will match up perfectly and the phone will install the older radio without issue.
4. What Benefits does rooting a phone grant you?
Simply, it allows you to install any ROM of your choosing onto the phone as well as use custom kernels and certain applications that access locked functions on the phone. This can ultimately lead to; a longer battery life; more stable roms and more frequently updated roms; and finally an overall faster Android experience.
5. What is root access?
Root access essentially gives you access anything locked by the manufacturer on the phone. This most importantly means that you can read and write to any system partitions on the phone that would normally be locked.
6. Whats psneuter?
psneuter is an application used to grant temporary root access. This is done through an exploit in the android system and will give us a window to further exploit the system and ultimately grant us Permanent Root Access.
7. How do I find my CID?
To find your CID you run two commands. Firstly, in your CMD prompt you type 'adb reboot bootloader' when your phone is connected and USB debugging is active. This will restart your phone into its bootloader. Then once you see the words FASTBOOT_USB you type 'fastboot oem boot'. Then look for the words CID and then just read the 8 character CID.
Also there is a post with a screenshot here.
8. My phone will not find PC10IMG.zip
You will need to double check that the PC10IMG.zip is the correct ZIP file from the RUU that has been linked. It should be roughly 250mb in size and should be placed in the root folder of your SD Card. Also your SD Card must be compatible with your device (able to be read/written to). If you cannot access your SD Card from your Desire Z or G2 then there is probably something wrong with your SD Card. It should probably be reformatted.
9. Can I use this on the Desire Z/G2 running Gingerbread?
So far no one has been able to root the gingerbread version of android on the Desire Z/G2. Unfortunately, this guide still cannot root gingerbread desire Zs or G2s.
If there are any more, feel free to post them and I'll add them
10.I'm Missing my AdbWinApi.dll? What now?
espentan[U said:
][/U]
I don't know if you've figured this one out yet, but here's the solution to a potential cause.
You need to add the directory containing the "AdbWinApi.dll" to Windows' path under Environment Variables, so Windows know where to look for the necessary files when you enter commands in the shell.
For this exercise I'm going to assume that you have installed the Android SDK in the directory called "android-sdk-windows" on your C: hard drive. If you have it installed somewhere else, change the path I'm mentioning below accordingly.
Go to the Windows "Control Panel".
Click on "System and Security".
Click on "System".
Click on "Advanced system settings" in the left column of the window you're in.
Find the button called "Environment Variables" in the window that opens (it's at the bottom on the first tab).
Scroll down in the "System variables" box until you find "Path".
Select "Path" and click the "Edit" button.
At the very beginning of the input field called "Variable value" enter the following:
"C:\android-sdk-windows\platform-tools;" (without the quotes).
Do not remove any of the other paths, and make sure you have a semi colon at the end of the new path you're adding.
Reboot.
Now the windows command shell knows where to find the necessary DLL's and whatnot.
Click to expand...
Click to collapse
will this work if i have 1.84.666.2?
anyone? thought?
Should work fine as long as you've got a Desire Z or G2 lol.
hi, manageage to root the DZ sucessfully, however on step 5 you say
"5. Type in:
Code:
Reboot"
i got an Reboot: error not found
i retried with with "reboot" and was sucessful
Hi, im sure this has been covered before in other posts, but, could someone tell me, if i were to use the above method to downgrade and root etc, would this prevent me from doing an official upgrade, to, say gingerbread in the near future? Also is there any real benefits to going to gingerbread? I ask as im sure ive read somewhere its only possible to flash to cooked roms, not official ones (once downgraded and rooted etc).. this would concern me as ive moved over from win mo to android, and in my experiance, EVERY cooked unoficial rom i ever flashed (xperia x1) was simply rubbish, and i tried alot of them. (Even though people would say the roms would be fine, bugs smoothed out etc), i went back to stock in the end after constant dissapointment.
Sorry for the rant, just need to know where i stand.. thanks people..
jmpcrx said:
Hi, im sure this has been covered before in other posts, but, could someone tell me, if i were to use the above method to downgrade and root etc, would this prevent me from doing an official upgrade, to, say gingerbread in the near future? Also is there any real benefits to going to gingerbread? I ask as im sure ive read somewhere its only possible to flash to cooked roms, not official ones (once downgraded and rooted etc).. this would concern me as ive moved over from win mo to android, and in my experiance, EVERY cooked unoficial rom i ever flashed (xperia x1) was simply rubbish, and i tried alot of them. (Even though people would say the roms would be fine, bugs smoothed out etc), i went back to stock in the end after constant dissapointment.
Sorry for the rant, just need to know where i stand.. thanks people..
Click to expand...
Click to collapse
It is pretty difficult to go back to stock updates from your carrier for example Vodafone. This is because of the unique CIDs used and the fact that it is extremely hard to find a stock ROM since no one can give you a NANDROID backup.
Anyways, there are numerous benefits to rooting your phone included with most ROMs. These benefits include longer battery life, faster ROMs & various other things depending on each chef.
Ok, thanks, but are the roms buggy at all, will some of the hardware not work properly, or will i have freezing probs etc, as i found this always to be the case with win mo roms?.. have you personally found a rom that works perfectly that includes htc sense? As i do like the UI..
My goal is to have all security off, full perm root, with a perfecly working sense rom that i can then overclock to a speed that works well with my particular phone, and to underclock when idle etc..
Thanks..
I need to verify that my Tmobile G2's INFOCID is compatible.
I typed in the two commands:
adb reboot bootloader
fastboot oem boot
The first one worked. The second command is not recognized once I'm in the bootloader. Can someone suggest a solution?
Newbie question,
how to unroot if i rooting the phone using this metode?
and how to go back to original rom?
Vader™ said:
Newbie question,
how to unroot if i rooting the phone using this metode?
and how to go back to original rom?
Click to expand...
Click to collapse
Firstly, to root the phone just follow the steps and once you've finished them all you will be done.
Second, it should technically be possible once you've rooted the phone to simply do a NANDROID backup via ClockWorkMod Recovery before you start flashing new ROMs. If you have backed it up and later decide you want to unroot then all you would need to do from there is restore your nandroid backup and unroot the phone through this method.
forceOnature said:
I need to verify that my Tmobile G2's INFOCID is compatible.
I typed in the two commands:
adb reboot bootloader
fastboot oem boot
The first one worked. The second command is not recognized once I'm in the bootloader. Can someone suggest a solution?
Click to expand...
Click to collapse
Using this method you don't have to worry about your CID. If you make a goldcard it will completely bypass the need for one of the CID's listed in the first post. So to put it simply, you don't need to worry about your unique CID if you create and use a goldcard to downgrade.
Aegishua said:
It should technically be possible once you've rooted the phone to simply do a NANDROID backup via ClockWorkMod Recovery before you start flashing new ROMs. If you have backed it up and later decide you want to unroot then all you would need to do from there is restore your nandroid backup and unroot the phone through this method.
Click to expand...
Click to collapse
okay, but we need to root the device first right? before ClockWorkMod Recovery can run, the problem is, if I root the device first, the device must be downgrade to build 1.34.405.5, and now my Desire Z using build 1.82.xxx.x
is it if we backup via ClockWorkMod, the ROM that we backup is 1.34.405.5? not my current build?
please help bro, really confused here
Hi forceonature, im no expert, but when i was having a look myself, i found out it was simply my enviroment variables wernt set up for the directory fastboot was located.. an easy way round this was just to enter the directory fastboot was in (program files, 'some directory'.. do a quick search) within your command prompt, and type the second command from there.. hope that helps..
Everything goes fine until
mmap() failed. Operation not permitted
when I put in
adb shell /data/local/tmp/psneuter
Any help?
Also I can only put su and Superuser.apk on my sdcard if I manually transfer them.
Hi forceonature, im no expert, but when i was having a look myself, i found out it was simply my enviroment variables wernt set up for the directory fastboot was located.. an easy way round this was just to enter the directory fastboot was in (program files, 'some directory'.. do a quick search) within your command prompt, and type the second command from there.. hope that helps..
Click to expand...
Click to collapse
I need to verify that my Tmobile G2's INFOCID is compatible.
I typed in the two commands:
adb reboot bootloader
fastboot oem boot
The first one worked. The second command is not recognized once I'm in the bootloader. Can someone suggest a solution?
Click to expand...
Click to collapse
I tried the same thing to get my DZ phones CID and the first one worked and the second didn't. If I don't have to make a gold card all the better. How can I find out for sure if my CID is on the list or not? Also if I have to make a gold card do I need to have a micro SD card to make the gold card?
Thanks,
Chevy
chevy2410 said:
I tried the same thing to get my DZ phones CID and the first one worked and the second didn't. If I don't have to make a gold card all the better. How can I find out for sure if my CID is on the list or not? Also if I have to make a gold card do I need to have a micro SD card to make the gold card?
Thanks,
Chevy
Click to expand...
Click to collapse
You should get a line that says INFOt.cid=XXXXXXXX or any of the lines that say your 8 Digit CID. However, as you can see there are multiple lines that say it and they should all be the same.
If your CID does match one on that list then you will not need a goldcard.
I've attached a screenshot to make things easier.
forceOnature said:
okay, but we need to root the device first right? before ClockWorkMod Recovery can run, the problem is, if I root the device first, the device must be downgrade to build 1.34.405.5, and now my Desire Z using build 1.82.xxx.x
is it if we backup via ClockWorkMod, the ROM that we backup is 1.34.405.5? not my current build?
please help bro, really confused here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Yeah, you can only have a NANDroid backup of 1.34.xxx because there is no way to get clockwork onto a 1.72+ rom.
Hi, I'm new to rooting the G2. Iv'e been trying to follow this tutorial, but I'm having some trouble. After renaming Rom.zip to PC10IMG.zip I booted into the bootloader and it says 'no image found' or something like that. What am I doing wrong? Am I not supposed to put the zip file on the root of the SD card? Is it possible to just use the RUU to downgrade?
And regarding the downgrade, the build number on my G2 shows 1.22 . Isn't that lower than 1.34?
Any help is appreciated!
I followed the instructions twice and both times I get to
"/data/local/tmp/misc_version –s 1.33.405.5"
I get
/
Patching and backing up partition 17
Error opening backup file.
#
The first time around I iqnored it and went through hboot, the rom PC10IMG.zip was checked and verified and finally failed prompting "the main version is older"
what am I missing?
EDIT: checked SD card, unmount and remounted phone/sdcard no avail.
Will try 1.33 Bell rom next.
EDIT2: Patching and backing up sucessful, problem was I couldn't get my phone to stay in debugged mode without being in DISK DRIVE, had to start HTC Sync to mount the phone in that way to relieve the sd card, allowing adb to patch the file. Now running through PC10IMG.zip with fingers crossed.
EDIT3: Everything went smooth after that! Thanks. Now I will attempt to update to 2.3 and Sense 3.0
EDIT4: Now running on 2.3.3 and Sense 3.0 Virtuous port. Testing...probably going back to more stable gingerbread and sense 2.1
Root Galaxy Nexus (Either GSM or LTE) in Linux (Personally in Ubuntu)
Disclaimer: I am not at fault for anything you have done to your phone (ie. Brick, break, etc.). You are doing this at your own discression. I am merely stating what I did to unlock/root my phone.
Tutorial Broken Down Into Three Sections
I. Unlocking the bootloader
II. Installing Clockwork Mod Recovery
III. Installing SuperUser
Resources
1. Super User (used by flashing in Clockwork): http://download.clockworkmod.com/test/su.zip
You can get the latest version here: SuperUser by ChainsDD
2. Clockwork – based by carrier
1. Verizon (CDMA) version: CMW Galaxy Nexus
File name:*recovery-clockwork-5.5.0.4-toro.img
MD5:*b2d31c29b7ef785f9c0802a12264d322
File size:*5,263,360*(bytes)
2. GSM version: CMW Galaxy Nexus
File name:*recovery-clockwork-5.5.0.2-maguro.img
MD5:*445887336a863573997ccbaeedddc984
File size:*5,427,200*(bytes)
Unlocking Bootloader
Part 1: Unlock
1. First off, you need to download the adb drivers. There have been mentions of just getting the drivers, but I actually have the entire SDK. You can download it here. http://developer.android.com/sdk/index.html
2. Plug in your device, then open up Terminal (Ctrl + Alt + T) and type in: “lsusb” (without quotes). This will pull up all the devices plugged into your usb slots. Look for the one that says samsung (others have found google, but please make note).
3. Find the device, then find where it says ID. After where it says ID, it should have a number/letter mix such as “04e8” or such. Make note of that for later.
4. Go to http://developer.android.com/guide/developing/device.html . This will give the instructions on how to Install the device drivers (specific to each manufacturer). Start from where it says “4. Set up your system to detect your device.”
5. Go to your internal and cd to platform-tools. (This should include both adb and fastboot.) Put your phone into fast boot. (Do this by holding the power, volume up, and volume down buttons while phone is off).
6. Once in fastboot, go back to your computer and type in “sudo fastboot oem unlock”. This will bring up the option to unlock your phone's bootloader on your device's screen. It will give you a disclaimer, and it will say that if you unlock, it will wipe all of your phone's data. Scroll to Yes using the vol up or vol down buttons, and select it with the power button.
7. If you boot straight from there, you will go through a series of boot loops (it was 2 for me) then will be prompted to go through the process of setting up your Google account again. again.
Congratulations, your phone is now unlocked. However, this doesn't mean that you have rooted your phone.
Rooting
Part 2: Putting Clockwork Mod Recovery On Your Phone
(do step one for preparation of Part 3)
1. First, we will want to push su.zip to your phone's Internal storage or “sdcard” partition. Open up Terminal and type the command “adb push 'directory_of_su.zip'/su.zip /sdcard/”. Hit enter/return and it should transfer over. (Based on the quality of usb cord, times of transfer may vary.)
To make this easier, put su.zip into the directory of adb. Then all you have to use for the command is “adb push su.zip /sdcard/”.EDIT:
After you root, you have to delete /system/recovery-from-boot.p and reflash or else every time you reboot, the recovery partition will be written over by android. This can either be done in terminal (phone or comp) or by a file manager with root access (such as Root Explorer).
Reference: http://forum.xda-developers.com/showthread.php?t=1392336
Thanks vihil
2. Put your phone in fastboot mode again (vol up + vol down + power)
3. Go back to Terminal and type in “fastboot flash recovery 'whatever the file name is'”. This will flash CWM (Clockwork Mod) onto your phone, deleting your phone's stock recovery image.
EDIT: If it doesn't work, i.e. due to permissions, run with sudo
Part 3: Flashing Super User onto your phone.
1. Next, go into Clockwork by hitting the volume up or down buttons till you see recovery mode. Hit the power button to enter Clockwork.
2. Scroll down (using volume buttons) till you get to “install zip from sd card”. Use the power button to select it.
3. Scroll down to “su.zip” and select it. Then, hit the selection for installing the zip file.
4. Go back using the “Go Back” selection to return to the main screen.
5. Reboot the system using the “reboot system”.
Congratulations! You now have Root access!!!
Have fun with Flashing ROMs!
Special Thanks to scary alien on androidforums.com and jcarrz1 on XDA
Reserved
Reserved......
Thanks a lot I was looking for exactly this. Appreciated. Will try in a few hours when I get my phone.
Downloaded the sdk file but have no idea what to do. My windows computer died and it would be a lot easier on that to do all this but all I have is a computer with linux currently so if anyone would be kind enough to tell me how to install sdk I'd appreciate it. I seen the read me and seen it says execute "android" first but I don't know how to do that. I realize this is incredibly annoying to the xda hive mind trust me I hate needing help like this I'm nothing close to a noob as far as rooting flashing and all that good stuff I'm just unfortunately stuck with only Linux. I'd really really appreciate it.
under the tools folder there is a script called android, u can either run it in a terminal or hopefully if u were to click it, it was ask if u want to run it!
If you want to run it, you can just cd to it in terminal, then do "./android" and that should do the trick.
./ is the way you execute scripts in linux.
Seems like my fastboot is stuck on `waiting for device`. I have the fastboot screen on my GN.
Before rebooting into fastboot `adb devices` successfully showed a device (i.e., usb debugging is enabled, dunno whether it is needed for the unlocking):
$ fastboot oem unlock
< waiting for device >
Any idea?
EDIT: Found the solution. After doing a `fastboot devices` it told me "no permissions fastboot" so I needed to be root on my computer for it to work.
FadedLite said:
If you want to run it, you can just cd to it in terminal, then do "./android" and that should do the trick.
./ is the way you execute scripts in linux.
Click to expand...
Click to collapse
Thank you! That worked correctly and installed it. Now the next step to check the usb and if its there does not work, I might be entering this incorrectly but I typed just lsusb and enter nothing happened, held down ctrl, alt, t then typed in lsusb and nothing happened then just copied that entire part encase I was suppose to and got this.
[[email protected] ~]$ (Ctrl, Alt, T): lsusb
bash: syntax error near unexpected token `:'
Like I said I'm not expecting help because I know XDA doesn't like noobie questions, I will be greatly appreciative if you have patience with me and will even be willing to donate once I unlock the BL and root it. Thank you again.
C-4Nati said:
Thank you! That worked correctly and installed it. Now the next step to check the usb and if its there does not work, I might be entering this incorrectly but I typed just lsusb and enter nothing happened, held down ctrl, alt, t then typed in lsusb and nothing happened then just copied that entire part encase I was suppose to and got this.
[[email protected] ~]$ (Ctrl, Alt, T): lsusb
bash: syntax error near unexpected token `:'
Like I said I'm not expecting help because I know XDA doesn't like noobie questions, I will be greatly appreciative if you have patience with me and will even be willing to donate once I unlock the BL and root it. Thank you again.
Click to expand...
Click to collapse
You don't really need that step. Since '04e8' is Samsung and you have a Samsung device it will likely always be 04e8.
Part 1, 3. and 4. can be summarized as following:
Put the following line into /etc/udev/rules.d/51-android.rules:
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666", GROUP="plugdev"
Execute: chmod a+r /etc/udev/rules.d/51-android.rules
Type the following to verify it is working: "adb devices" It should display something like:
List of devices attached
01492B093401000F device
Part 1, 6. should probably changed to "sudo fastboot oem unlock"
Also, Part 2, 1. the preparation makes no sense to me: "(do step one for preparation of Part 3)". How can I go into Clockwork recovery before completing Part 2? Since Part 2 is about installing Clockwork...
Edit: And I just realised, C-4Nati, you should not write the "(Ctrl, Alt, T):" out.. that's just a shortcut to open a terminal. Just "lsusb" is fine. Then it should work.
---------- Post added at 11:33 AM ---------- Previous post was at 11:09 AM ----------
For anyone wondering why the step by step instructions in the OP do not work:
You need to flash the Clockwork recovery and install su.zip before you can remove the /system/recovery-from-boot.p (and if you follow that link provided it will cost you around $3.50 but you should be able to do it manually, will try to figure it out).
---------- Post added at 11:38 AM ---------- Previous post was at 11:33 AM ----------
(I couldn't find the /system/recovery-from-boot.p on my GN filesystem but maybe someone else does)
To remove /system/recovery-from-boot.p:
$ adb shell
$ su
# mount -o rw,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
# rm /system/recovery-from-boot.p
# mount -o ro,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
For simplicity, you can shorten that to: mount -o rw,remount /system
You can also delete it from a terminal on the phone or any file manager that allows root access. I think the free ES file explorer has root options.
vihil said:
You don't really need that step. Since '04e8' is Samsung and you have a Samsung device it will likely always be 04e8.
Part 1, 3. and 4. can be summarized as following:
Put the following line into /etc/udev/rules.d/51-android.rules:
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666", GROUP="plugdev"
Execute: chmod a+r /etc/udev/rules.d/51-android.rules
Type the following to verify it is working: "adb devices" It should display something like:
List of devices attached
01492B093401000F device
Part 1, 6. should probably changed to "sudo fastboot oem unlock"
Also, Part 2, 1. the preparation makes no sense to me: "(do step one for preparation of Part 3)". How can I go into Clockwork recovery before completing Part 2? Since Part 2 is about installing Clockwork...
Edit: And I just realised, C-4Nati, you should not write the "(Ctrl, Alt, T):" out.. that's just a shortcut to open a terminal. Just "lsusb" is fine. Then it should work.
---------- Post added at 11:33 AM ---------- Previous post was at 11:09 AM ----------
For anyone wondering why the step by step instructions in the OP do not work:
You need to flash the Clockwork recovery and install su.zip before you can remove the /system/recovery-from-boot.p (and if you follow that link provided it will cost you around $3.50 but you should be able to do it manually, will try to figure it out).
---------- Post added at 11:38 AM ---------- Previous post was at 11:33 AM ----------
(I couldn't find the /system/recovery-from-boot.p on my GN filesystem but maybe someone else does)
To remove /system/recovery-from-boot.p:
$ adb shell
$ su
# mount -o rw,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
# rm /system/recovery-from-boot.p
# mount -o ro,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
Click to expand...
Click to collapse
for needing to type in lsusb, i found that as somewhat of a precaution. I had seen on other threads that others had their device show up as either google or samsung. So i just figured rather check first instead of installing both or something.
for the preparation, basically you do that since your phone is already on. after flashing cwm, you would have to boot back into your phone, push the file to your sdcard, then boot back into recovery. All it does is that it saves just a bit of time.
As for the sudo fastboot, I didn't actually have to do that, but i'll add it, Thanks.
As for the cwm terminal commands, i'll add that as well. Thanks again.
FadedLite said:
Part 3: Flashing Super User onto your phone.
1. Next, go into Clockwork by hitting the volume up or down buttons till you see recovery mode. Hit the power button to enter Clockwork.
2. Scroll down (using volume buttons) till you get to “install zip from sd card”. Use the power button to select it.
3. Scroll down to “su.zip” and select it. Then, hit the selection for installing the zip file.
4. Go back using the “Go Back” selection to return to the main screen.
5. Reboot the system using the “reboot system”.Congratulations! You now have Root access!!!
Have fun with Flashing ROMs!
Click to expand...
Click to collapse
not yet. after flashing su-bin-3.0.3.2-efghi-signed.zip (which is just the binary), the user still needs to flash Superuser-3.0.7-efghi-signed.zip, to have Superuser.apk placed in /system/app, otherwise GUI apps won't have access to su. (unless, of course, the zip you are linking here has them both)
It's preferable to have users linked to ChainsDD website, there people will find latest binaries and Superuser.apk. I also don't see any mention to him in the OP. Even if this is a tutorial, don't forget to give credit where needed.
Some help for an Ubuntu Noob/Not a Noob to Windows
Hi all,
Long story short, I no longer have Windows (nor a way to load Windows without a purchase; I'd rather not). So I have a fresh install of Ubuntu Linux 11.10. I have read this guide and some of the helpful responses and have yet to be able to get adb and fastboot up and running. I am beginning to understand the nuances of Ubuntu and have tackled adb and fastboot in Windows but Ubuntu is different. I would say I have put in two 12 hour sessions with no desire to pack it in and go back to Windows (I am avoiding a VM as well).
Here is where I seem to be stuck (mind you I have done a fresh install numerous times to start with a fresh playing field in case I have messed up something): Whether downloading the full SDK through Eclipse (cos I'd like to dev apps soon and why not have it?) or downloading the SDK on its own, I get it without fail. The steps leading up to entering in commands for terminal so that the computer recognizes either just my Nexus or a slew of OEMs are easy enough but maybe I am messing up. It is where getting the computer to see my device (udev steps) I can't seem to get it right. I have even looked at other guides for reference (most seem messy and convoluted) but keep coming back here.
I know you probably need more to go on and I am sooooooo willing to tell more. I just hope someone is down to help a brother out. Like I said, I just need some direction. I have manually rooted and all that jazz, just in windows. Thanks in advance for your help.
jmar
jmartino5920 said:
Hi all,
Long story short, I no longer have Windows (nor a way to load Windows without a purchase; I'd rather not). So I have a fresh install of Ubuntu Linux 11.10. I have read this guide and some of the helpful responses and have yet to be able to get adb and fastboot up and running. I am beginning to understand the nuances of Ubuntu and have tackled adb and fastboot in Windows but Ubuntu is different. I would say I have put in two 12 hour sessions with no desire to pack it in and go back to Windows (I am avoiding a VM as well).
Here is where I seem to be stuck (mind you I have done a fresh install numerous times to start with a fresh playing field in case I have messed up something): Whether downloading the full SDK through Eclipse (cos I'd like to dev apps soon and why not have it?) or downloading the SDK on its own, I get it without fail. The steps leading up to entering in commands for terminal so that the computer recognizes either just my Nexus or a slew of OEMs are easy enough but maybe I am messing up. It is where getting the computer to see my device (udev steps) I can't seem to get it right. I have even looked at other guides for reference (most seem messy and convoluted) but keep coming back here.
I know you probably need more to go on and I am sooooooo willing to tell more. I just hope someone is down to help a brother out. Like I said, I just need some direction. I have manually rooted and all that jazz, just in windows. Thanks in advance for your help.
jmar
Click to expand...
Click to collapse
Are you getting a "waiting on device" message or something similar when you run adb or fastboot?
Forget about the udev nonsense (not important really until you start developing full time) and just drop a sudo before your commands.
You can shoot me a PM or a gtalk (same username as my xda) if you want and I'd be more than happy to help you get your system going.
Thanks, still a bit more annoying that Windows but this tutorial makes it easy.
Sorry if this is ignorant, but can I use these instructions with Unix & terminal on Mac OS X? I'm thinking yes???
I rooted mine in linux as well... No problems. For some reason I was able to do it much easier though...
I did the fastboot oem unlock step above (Part 1). Rebooted then installed superuser from the android market. Then I installed Clockworkmod from the android market.
Done.
Not sure if I'm missing out on something by doing it this way but so far I've had no issues....
I created the pathways needed to open files in command prompt and set the pathways to C:\Android-sdk\tools and C:\Android-sdk\platform-tools. I have unzipped and installed everything and placed the files in the platform-tools folder, but i cannot access the files through prompt. it tells me C:\android-sdk\platform-tools is not recognized as and internal or external command. Please someone help... i havent worked with DOS since i was in high school 14+yrs ago.
So you changed your PATH environment variable to include 'C:\Android-sdk\tools' and platform-tools?
That just lets cmd run exe's from those folders regardless of where it is pointed, it will not let you access other files from those folders.
You still need to either change where cmd is pointed (using the 'cd' command) or you can move the files to where cmd is currently pointed (probably C:\Users\Username>')
-Nipqer
Still need some assistance, when starting to downgrade from gingerbread its telling me that i dont have a device detected. I have USB debugging on, so i dont know what i should do; any ideas
PvtJoker said:
Still need some assistance, when starting to downgrade from gingerbread its telling me that i dont have a device detected. I have USB debugging on, so i dont know what i should do; any ideas
Click to expand...
Click to collapse
Hello noob.
Did you install the USB drivers ( HTC Sync software )?
shared_ptr said:
Hello noob.
Did you install the USB drivers ( HTC Sync software )?
Click to expand...
Click to collapse
Im not sure if i installed the USB drivers. I installed everything that the wiki guide said to. I am gonna try again once i get home.
PvtJoker said:
Im not sure if i installed the USB drivers. I installed everything that the wiki guide said to. I am gonna try again once i get home.
Click to expand...
Click to collapse
I faced the same problem. My Windows PC didn't recognize the attached Android-device (Check Windows Device Manager).
After following the instructions as described in the following thread it suddenly worked and I could successfully root my device:
[Tutorial] Adb Driver Android 1.0 Install
Cheers
pemphix
Please help
Well i got the USB driver installed and ran adb Devices.... it picked up my phone but now when im running adb push fre3vo /data/local/tmp i get the message "cannot stat "fre3vo" no such file or directory". Am i suppose to be in C:\users\name\Android-sdk\platform-tools\ to run the adb push?
If so, need some help with command prompt. Im running windows 7,
need to either edit the path in environmental variables or make sure all the files needed and adb.exe are in the same folder and change directories to there, i have a guide to setup fastboot (and adb is the same setup for the most part) HERE
Ok, Well i got Command prompt to start working. i remembered how to path in dos but my first go round with commands didnt work so i have to try another line to exploit.. wish me luck:fingers-crossed:
I will keep that in mind.. right now im trying to get the exploit to work.. i have gone through 1 thru 3 and got nothing yet...
so you successfully downgraded to 2.2 and are now trying to temp root? maybe like the guide you are using so we know what steps 1 through 3 are and explain what isnt working if you have issues
xda wiki, cyanogen wiki and strawmetals pdf guide are simple easy and trust worthy. i hope one of these is the guide you are using
In process of downgrading
demkantor said:
so you successfully downgraded to 2.2 and are now trying to temp root? maybe like the guide you are using so we know what steps 1 through 3 are and explain what isnt working if you have issues
xda wiki, cyanogen wiki and strawmetals pdf guide are simple easy and trust worthy. i hope one of these is the guide you are using
Click to expand...
Click to collapse
I have gotten as far as "# dd if=/dev/block/mmcblk0p17 bs=1 skip=160 count=10 1.00.000.010+0 records in 10+0 records out 10 bytes transferred in 0.001 secs (10000 bytes/sec)". Now the next step is to downgrade. the command line is:
> adb push su /data/local/tmp/
> adb push busybox /data/local/tmp/
> adb push fixsu.sh /data/local/tmp/
> adb install SuperUser.apk
> adb shell chmod 755 /data/local/tmp/fixsu.sh
> adb shell /data/local/tmp/fixsu.sh
but my command prompt is still # what do i do to
skip that, thats just for temp root which is pretty unnecessary. just downgrade and move on
I know i sound really stupid, but where is the Root of my SD card??? Please dont tell me its just the card itself...
yup, dont put files in a folder is what that means
Ok, now im in Hboot, but i dont understand what im suppose to do next. How do i work bootloader to downgrade. Once in bootloader i see; fastboot, recovery, factory reset, simlock and image crc
if the PC10IMG.zip is on the root of sd card and is named properly it will do it for you, just boot into hboot and let it do its thing.
if you want to do it the fastboot way (my preference but both work fine) then follow setherios guide to do it that way
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
oh and always check md5sums when flashing firmware, its a good habit to have
Now here is an important question. If i had to turn off my phone before the Hboot took, do i have to go thru the entire process again? or can i just do the reboot bootloader?
well i just tried to fastboot flash zip StockRom.zip and it said cannot load StockRom.zip any ideas how to get it to work??
are you using window? if so know that it may be hiding the file extentions, so pc10img.zip should be named pc10img
etc, this may be your issue other than that you will have to copy and paste your issues so I can see what you are doing and why its failing
Sent from my HTC Vision using xda premium