Related
So i have the 11 pin samsung MHL adapter for the GS3. When i connect the phone directly to the TV I get video and sound (checked on both a samsung LED TV and a Dynex LCD).
When I try to connect phone into HDMI Input on Denon AVR-1610 reciever it outputs Video but NOT sound. I cannot figure out what the issues may be. Does it have anything to with my reciever? I went through every setting on the reciever and could not figure it out...
Anyone else have similar issues?
Omatter4 said:
So i have the 11 pin samsung MHL adapter for the GS3. When i connect the phone directly to the TV I get video and sound (checked on both a samsung LED TV and a Dynex LCD).
When I try to connect phone into HDMI Input on Denon AVR-1610 reciever it outputs Video but NOT sound. I cannot figure out what the issues may be. Does it have anything to with my reciever? I went through every setting on the reciever and could not figure it out...
Anyone else have similar issues?
Click to expand...
Click to collapse
I have the exact same problem.
Anyone else having issues with this? Short story is im not getting DD+ through netflix/amazon, yet will get DTS/DD through xbmc.
Im having issues with dolby digital plus and my fire tv. I have a new LG home theater system BH9530TW. Ive set the firetv audio settings to play dolby digital plus over hdmi and have the firetv plugged into the receiver, the receiver is set to multi channel pcm. When ever i play a netflix or amazon prime movie with 5.1 i get no sound, i have to change it back to stereo for any sound. Ive tested xbmc and get DD and DTS through movies on that, i don't have any DD+ files to test that, im not sure if xbmc will passthrough DD+ anyway.
Taken from the specs of the receiver:
Audio - LPCM
Audio - Dolby Digital
Audio - Dolby Digital Plus
Audio - Dolby TrueHD
Audio - DTS
Audio - DTS-HD High Resolution Audio
Audio - DTS HD-Master Audio
Audio - MPEG 1/2 L2
Audio - MP3
Audio - Audio - ID3 Tag
Audio - MMA
Audio - AAC
Audio - FLAC
Strange, I can confirm that my Onkyo properly plays Dolby Digital + from Amazon and Netflix. I also have no trouble with DD or DTS via XBMC. My FireTV is connected the same way yours is, via HDMI straight to the receiver.
jeebuspwnz said:
Strange, I can confirm that my Onkyo properly plays Dolby Digital + from Amazon and Netflix. I also have no trouble with DD or DTS via XBMC. My FireTV is connected the same way yours is, via HDMI straight to the receiver.
Click to expand...
Click to collapse
Damn, i was hoping it was an issue with the firetv lol. Must be a receiver issue, hopefully a firmware update may resolve it in the future. I will test it with an optical cable and see if i can atleast get DD 5.1 out of it that way. The "virtual" surround it produces is extremely good however and i may stick to that yet.
Af tv optical dd
garvani said:
Damn, i was hoping it was an issue with the firetv lol. Must be a receiver issue, hopefully a firmware update may resolve it in the future. I will test it with an optical cable and see if i can atleast get DD 5.1 out of it that way. The "virtual" surround it produces is extremely good however and i may stick to that yet.
Click to expand...
Click to collapse
Is not your receiver, AFTV DD over optical doesn't work.
I have an LG 7540tw home theater and DD+ doesn't work for me too. What I did was set the dolby digital plus setting to Auto for the Fire TV, so now the receiver plays DD 5.1 which is downmixed from the DD+ 5.1 of Netflix thru HDMI, I don't have an optical cable connected from the fireTV to the receiver. There are others with this issue too, but I cant find the amazon forum's link anymore
DD+
I ran in to this with Netflix from a Roku3 via HDMI to a 54" Vizio 5.1 sound bar. All issues with DD+ involve whether or not something in line can decode it. Also, DD+ is HDMI only so Digital Coaxial or Optical won't work either. I came to FireTV as it will output DD via Optical which my soundbar will handle. The Vizio sound bar only is capable of DD and DTS. DD+ results in silence.
To do DD+ you need an AVR that decodes it.
BTW, I do not recommend the Vizio sound bar. It does do rear surround and sub-woofer via bluetooth which works well. The downside is that it has only one HDMI input and supports only DD and DTS. I bought it as I didn't want to drill my new house. By the time I paid $500 for it, $50 for an HDMI switch, and $100 for AFTV I would have been much better off buying a more capable traditional AVR system for much less money.
ars_92 said:
I have an LG 7540tw home theater and DD+ doesn't work for me too. What I did was set the dolby digital plus setting to Auto for the Fire TV, so now the receiver plays DD 5.1 which is downmixed from the DD+ 5.1 of Netflix thru HDMI, I don't have an optical cable connected from the fireTV to the receiver. There are others with this issue too, but I cant find the amazon forum's link anymore
Click to expand...
Click to collapse
I will have to give this a try, i would have thought i had already but possibly not. DD5.1 is adequate enough.
To clear things up i have the AFTV connected to the receiver via hdmi in, then receiver connected to my projector via hdmi out. I only mentioend optical as possible alternative.
schneid said:
To do DD+ you need an AVR that decodes it.
Click to expand...
Click to collapse
Its not that simple either as my AVR has support for DD+ but ends in silence as well. Theres something weird going on there, im glad im not the only one with the issue.
garvani said:
Its not that simple either as my AVR has support for DD+ but ends in silence as well. Theres something weird going on there, im glad im not the only one with the issue.
Click to expand...
Click to collapse
Have you tried another HDMI cable?
garvani said:
Its not that simple either as my AVR has support for DD+ but ends in silence as well. Theres something weird going on there, im glad im not the only one with the issue.
Click to expand...
Click to collapse
Maybe I'm missing something, but if you have your AVR set to multi channel PCM, doesn't that assume the FTV will do the decoding (which it can't). Shouldn't you be sending the DD+ as passthrough for the AVR to decode?
bruce7373 said:
Maybe I'm missing something, but if you have your AVR set to multi channel PCM, doesn't that assume the FTV will do the decoding (which it can't). Shouldn't you be sending the DD+ as passthrough for the AVR to decode?
Click to expand...
Click to collapse
I agree, FTV decodes nothing. An AVR of some sort that has paid the licensing fee must be in the mix. If the AVR is DD+ rated, I'd take a hard look at the HDMI cables. Don't have to be expensive but do need to be capable of handling the standard being pushed through them.
I am using Kodi on my Fire TV and noticed that the movies are only playing in stereo mode. The Dolby settings on the Fire TV itself are set to automatic and trailers play in surround sound. Are there settings in Kodi that need to be modified? Any help is appreciated!
burowyako said:
I am using Kodi on my Fire TV and noticed that the movies are only playing in stereo mode. The Dolby settings on the Fire TV itself are set to automatic and trailers play in surround sound. Are there settings in Kodi that need to be modified? Any help is appreciated!
Click to expand...
Click to collapse
Go to the audio output settings in Kodi, and make sure you are on the expert level. Put the number of channels to 2.0, passthrough enabled, and select all the audio formats at the bottom.
Yes I'm struggling getting surround sound as well, have lived with it up until now as usually everything I'm watching says 2.0 stereo, but last night actually found something that said 5.1 and I wasn't getting any sound from that! lol
Have tried different settings (as above) but still no sound through my amp, have only just really started looking into it but nothing worked in all the different guides I tried.
Will hopefully get this sorted soon, there are quite a few settings in the expert mode so will hopefully get round to trying them all, it's just having to go back and forth after changing the set up that's the pain lol
wonneil said:
Yes I'm struggling getting surround sound as well, have lived with it up until now as usually everything I'm watching says 2.0 stereo, but last night actually found something that said 5.1 and I wasn't getting any sound from that! lol
Have tried different settings (as above) but still no sound through my amp, have only just really started looking into it but nothing worked in all the different guides I tried.
Will hopefully get this sorted soon, there are quite a few settings in the expert mode so will hopefully get round to trying them all, it's just having to go back and forth after changing the set up that's the pain lol
Click to expand...
Click to collapse
What is your connection to the amp? Is it HDMI, or optical?
lennie paz said:
What is your connection to the amp? Is it HDMI, or optical?
Click to expand...
Click to collapse
I have an HDMI connection, when playing a 5.1 video I can see the front left/right speaker icons stuttering on my amp (usually it would show all 5 speakers) and no sound comes through. I suppose it could be the stream but think it's probably my settings...
Is the amp supposed to convert even when playing a 2.0 stream or does it have to be a 5.1? I have always assumed it has to start as 5.1 which is why I've left it until now
wonneil said:
I have an HDMI connection, when playing a 5.1 video I can see the front left/right speaker icons stuttering on my amp (usually it would show all 5 speakers) and no sound comes through. I suppose it could be the stream but think it's probably my settings...
Is the amp supposed to convert even when playing a 2.0 stream or does it have to be a 5.1? I have always assumed it has to start as 5.1 which is why I've left it until now
Click to expand...
Click to collapse
Some amps will convert a 2.0 audio stream into a fake 5.1 stream, but it's an actual setting on the amp. Do you have DD audio set to On in the settings for the AFTV? What brand is the amp?
lennie paz said:
Some amps will convert a 2.0 audio stream into a fake 5.1 stream, but it's an actual setting on the amp. Do you have DD audio set to On in the settings for the AFTV? What brand is the amp?
Click to expand...
Click to collapse
Yes I've set it to DD Plus via HDMI and have now pretty much tried all the settings in the audio options including 2.0, 5.1 and also (my setup) 7.1 but none seem to work, have also tried changing the Output config, Stereo upmix, Resample quality, Keep audio device alive but nothing is happening, still getting no sound when it displays 5.1 DD on the stream, even tried another episode and the same thing.
My amp is a Sony STR-DA3600ES which is DTS capable but like I say the speaker icons flicker when playing the stream so there's definitely something not quite right
I have never had problems with anything else so think I may have to just give up on this Kodi problem
wonneil said:
Yes I've set it to DD Plus via HDMI and have now pretty much tried all the settings in the audio options including 2.0, 5.1 and also (my setup) 7.1 but none seem to work, have also tried changing the Output config, Stereo upmix, Resample quality, Keep audio device alive but nothing is happening, still getting no sound when it displays 5.1 DD on the stream, even tried another episode and the same thing.
My amp is a Sony STR-DA3600ES which is DTS capable but like I say the speaker icons flicker when playing the stream so there's definitely something not quite right
I have never had problems with anything else so think I may have to just give up on this Kodi problem
Click to expand...
Click to collapse
Here are my exact settings, and 5.1 audio plays perfect. If these settings don't work for you, then it might be that the AFTV doesn't play well with your amp when connected with HDMI. I bought a Denon amp a few weeks ago, and no matter what the settings were, I couldn't get 5.1 audio to work. I returned the Denon, and bought a Yamaha, and 5.1 audio plays perfectly. Another thing you can try, is run an optical cable from the AFTV to the Sony, and see if that works. Make sure you go into the AFTV settings and change the audio output from HDMI, to optical. You may also want to try a new HDMI cable.
lennie paz said:
Here are my exact settings, and 5.1 audio plays perfect. If these settings don't work for you, then it might be that the AFTV doesn't play well with your amp when connected with HDMI. I bought a Denon amp a few weeks ago, and no matter what the settings were, I couldn't get 5.1 audio to work. I returned the Denon, and bought a Yamaha, and 5.1 audio plays perfectly. Another thing you can try, is run an optical cable from the AFTV to the Sony, and see if that works. Make sure you go into the AFTV settings and change the audio output from HDMI, to optical. You may also want to try a new HDMI cable.
Click to expand...
Click to collapse
Cheers Lennie, I thought about changing the HDMI cable so will definitely try that when I get home, if not will try optical as I didn't even think of that lol
Have tried your settings already (although didn't have the volume on downmix option) with no luck so the cable changes are the only thing left, will let you know how I get on... :good:
I managed to have a look at this last night (after searching various forums) and thought I would try XBMC to see if anything broke in Kodi 14.1, so installed the last Gotham built SPMC (13.4.0) but that had exactly the same results.
Pulled out all my equipment to change the HDMI cable over but that made no difference either, so plugged in an optical cable, changed the audio input on my amp and changed the AFTV to DD over optical and had 5.1 sound straight away :good:
So looks like there's something strange with Kodi/XBMC when trying to get 5.1 surround using HDMI on some amps...
wonneil said:
I managed to have a look at this last night (after searching various forums) and thought I would try XBMC to see if anything broke in Kodi 14.1, so installed the last Gotham built SPMC (13.4.0) but that had exactly the same results.
Pulled out all my equipment to change the HDMI cable over but that made no difference either, so plugged in an optical cable, changed the audio input on my amp and changed the AFTV to DD over optical and had 5.1 sound straight away :good:
So looks like there's something strange with Kodi/XBMC when trying to get 5.1 surround using HDMI on some amps...
Click to expand...
Click to collapse
Glad you got it sorted out. Like I said, I bought a new Pioneer a few weeks ago, and couldn't get the audio to work using HDMI. I returned it and bought a Yamaha, and it works perfectly. The only reason I figured it out, was when the audio wasn't working, I took the AFTV and hooked it up to my other home theater setup, and it worked fine with my Denon receiver. The audio was making a really high pitched static sound when using the Pioneer. My Xfinity box's audio worked fine with the Pioneer, so I know it was the AFTV, not the Pioneer, that was the issue.
lennie paz said:
Here are my exact settings, and 5.1 audio plays perfect. If these settings don't work for you, then it might be that the AFTV doesn't play well with your amp when connected with HDMI. I bought a Denon amp a few weeks ago, and no matter what the settings were, I couldn't get 5.1 audio to work. I returned the Denon, and bought a Yamaha, and 5.1 audio plays perfectly. Another thing you can try, is run an optical cable from the AFTV to the Sony, and see if that works. Make sure you go into the AFTV settings and change the audio output from HDMI, to optical. You may also want to try a new HDMI cable.
Click to expand...
Click to collapse
Know this is a old thread but hopefully you will reply. Using Kodt why do we have to select 2.0 to get 5.1 surround sound or am I not understanding what you are saying?
lartomar2002 said:
Know this is a old thread but hopefully you will reply. Using Kodt why do we have to select 2.0 to get 5.1 surround sound or am I not understanding what you are saying?
Click to expand...
Click to collapse
That's because Passthrough has been enabled, which means your receiver is doing the audio decoding.
Interesting. If I remember correctly I did not have to do that with SPMC Gotham 13.2, strange.
I know this is not the right spot but maybe someone could help me. I just got my shield console and it is sending multi channel audio to my receiver. I DO NOT want multi channel audio i want 2.0 audio. Does anyone know a way to NOT send multi channel audio?
Very helpful thread thanks!
Just a query though...
If I have 'Number of channels' set to 2.0 and have 'Stereo Upmix' on the reciever seems louder and high quality but with vocals coming out of all speakers which to me it should be centre speaker only. But if I have 'Stereo Upmix' off the centre channel is vocal only which to me is perfect but the quality is lower.
Is it just how it is or am I doing something wrong?
Running Fire tv stick (quad core version) running to Onkyo reciever.
Sent from my SM-G901F using Tapatalk
FYI, if you want to keep DTS Passthrough, don't upgrade KODI past 16.1 Jarvis. DTS passthrough is gone in Krypton on AFTV because that "Android" standards require API 23 (Marshmallow/Android 6.0) to "officially" support DTS and AFTV is still on API 22 (FireOS based on Android 5 Lollipop). I don' t see Amazon updating to a Marshmallow based image for FireOS anytime soon. It is a sad day.
Also if you want dts passthrough you can't enable "sync playback to display" otherwise it's going to passthrough as Dolby digital.
Hi,
My receiver has no hdmi, so I have audio put to it from tv. Sometimes I would like to listen to internet radio without having tv on, so direct connection to receiver would be great, even analog one. Do I need USB audio card or there are some other options? If yes, anyone uses something worth mentioning? Anyone tried USB cards on Shield?
Kajman said:
Hi,
My receiver has no hdmi, so I have audio put to it from tv. Sometimes I would like to listen to internet radio without having tv on, so direct connection to receiver would be great, even analog one. Do I need USB audio card or there are some other options? If yes, anyone uses something worth mentioning? Anyone tried USB cards on Shield?
Click to expand...
Click to collapse
I use an external USB dac. Works out of the box and mutes the hdmi sound output too so you will not be able to have it connected all the time for when you want the hdmi to output sound.
Sent from my iPad using Tapatalk
That's worse, but maybe I can live with it, maybe I find one with power switch, thanks
I am using a HDMI video / audio splitter. Works well.
Best part it doesn't need to be powered separately.
Does audio go through hdmi and separately? Analog audio or digital? Or maybe can you post name of the splitter?
I have mine setup to do this through bluetooth, where with a combination of apps i simply press and hold 2 on my third party remote, and my shield connects to my bluetooth a2dp reciever which in turn is connected to my stereo speakers, i simply disconnect the bluetooth connection when i want the sound to go through the tv......which i had setup through tasker to disconnect when i long press 2 again, but i think i broke this messing around with this particular task .....that reminds me, i gotta get round to fixing this
I can do this without even having to turn the tv on or even having bluetooth on, as the remote is a RF 2.4gh/IR remote
To take it a step further, i could potentially create a scenario where i press or long press my chosen button and have the shield wake up > unlock display > turn on bluetooth > connect to a2dp > open media app > emulate media play.......and have my music playing without having to turn on the tv.......the remote having media control and volume control as standard........assuming the app supports the media standards i.e. youtube app doesnt
Apps used
Xposed
Xposed additions (can map the remote/mouse/keyboard buttons to something else or have it initiate chosen tasker task i.e. long press 2 initiates "speakers on" task)
Tasker + plugins
Anyway, thats another avenue
I will buy this converter www.goo.gl/VqOvFB
MALOW said:
I will buy this converter www.goo.gl/VqOvFB
Click to expand...
Click to collapse
that's what i've been using since my Chromecast to send audio to my speaker bar. I just swapped the hdmi when i got the Shield.
has anyone managed to get 5.1 audio out of the shield via USB soundcard? I bought one but it seems that its sampling down to a stereo sound. I have set in settings 5.1 sound for USB.
I also bought a 7.1 xonar u7 usb dac but no output on surround channel only in left and right. I aready set the USB to 5.1 surround and tried all the video applications. Maybe the shield only supports usb pass through and PSM stereo.
eacudilla said:
I also bought a 7.1 xonar u7 usb dac but no output on surround channel only in left and right. I aready set the USB to 5.1 surround and tried all the video applications. Maybe the shield only supports usb pass through and PSM stereo.
Click to expand...
Click to collapse
USB Auidio Works with class compilant devices only, but not entirely sure what that means in this case.
What apps did you try and what audio/video source files did you used for your tests?
eacudilla said:
I also bought a 7.1 xonar u7 usb dac but no output on surround channel only in left and right. I aready set the USB to 5.1 surround and tried all the video applications. Maybe the shield only supports usb pass through and PSM stereo.
Click to expand...
Click to collapse
Same problem here, any progress since September?
im currently using this: https://www.amazon.co.uk/LiNKFOR-Ex...8-1-spons&keywords=hdmi+audio+extractor&psc=1
I connect the toslink to my sound bar so i can chromecast my spotify from my google home and not have to have the tv on. the audio still passes through to the tv, there also is a 3.5mm jack you can switch to.
I use the Audioquest Dragonfly DAC and it sounds amazing. I combine it with the Jitterbug. It's a little pricey (90-100) but I'm running to studio monitors so it's easier to tell the difference in quality.
I want to listen on my Android Samsung Note 9 but want no sound on TV. Can Chromecast 2 do that?
even i wanna know the answer to that
cranberry_vanilla said:
even i wanna know the answer to that
Click to expand...
Click to collapse
Good luck on getting an answer. I wasted my time even posting the question.
Well, a Chromecast Audio device will NOT do that. If you want to cast audio only, with no video, then Chromecast Audio will work for you.
Note10.1Dude said:
Well, a Chromecast Audio device will NOT do that. If you want to cast audio only, with no video, then Chromecast Audio will work for you.
Click to expand...
Click to collapse
I want to be able to watch TV on chromcast without waking up the entire household.
OK, different device (Chromecast Audio is a no-longer-sold specific device that cast audio with no video). Your question would be more appropriate to the general Chromecast forum, but I think the answer will depend on what you are casting to. Does your TV have bluetooth? best option I can think of would be to use bluetooth headphones or a speaker linked to the TV.
GigiR said:
I want to be able to watch TV on chromcast without waking up the entire household.
Click to expand...
Click to collapse
It doesn't appear that you understand my question. Chromecast streams to my cell phone and I want to be able to watch on the cell phone with no sound but with the video so that I do not wake up the whole household or I would like to be able to watch chromecast on my TV but worth no sound so I don't wake up the whole household
Right, and a Chromecast Audio will not do that. It only lets you cast audio, not video.
What you need is a regular Chromecast on the TV, then cast your video to the TV, but you sound output from the TV needs to go someplace. My suggestion was to connect bluetooth headphones to the TV and listen through them. You could run an audio could run and audio out cable from the TV to headphones or a small speaker near you if the bluetooth doesn't work for you. Chromecast Audio will NOT solve your issue.