Related
I got my new Rhodium (AT&T Tilt 2) on Monday, and I love it. Unfortunately, I was stupid and left it in my shirt pocket while i bent over a bowl of water. Predictably, it fell in. It seems to be working fine as far as making and receiving calls, and there is no problem with the touch screen. The problem is that three of the buttons on the bottom don't work - the send, windows, and back buttons.
I'm willing to take any suggestions. I'll have to end up replacing it anyway, and the warranty's void because it got wet.
If the sticker is white, your good to replace, but try a can of air duster blown around the keys. Or take the battery out and apply a SMALL DROP of rubbing alcohol blowing it out as soon as it seeps in, making sure it evaporates throughly befor reinstalling battery. And blow away from screen.
This may have been the wrong approach, but I basically took a hairdryer and blew straight over the keys that weren't working in hopes that drying under them would cause them to work again.
It worked. Phone appears to be working better now, though it's a bit crackly when I use my bluetooth headset.
Tanalark said:
This may have been the wrong approach, but I basically took a hairdryer and blew straight over the keys that weren't working in hopes that drying under them would cause them to work again.
It worked. Phone appears to be working better now, though it's a bit crackly when I use my bluetooth headset.
Click to expand...
Click to collapse
That's good. This is my suggestion: even though the keys are working now, leave the device out in the sun (even better if in a bowl of rice) for a day or two. It'll absorb all the residue that could do damage later on.
yes,a hairdryer or just sun shine can save your device,i suguest you£§d better turn off it before it is dry
Thanks for the advice, guys. So, how long should I leave this thing to dry before I can use it again?
Not the same phone, but I had my HTC Shadow completely immersed in a glass of water. It dried in two days, and resumed working perfectly.
(The sticker was still white, so it would not be under water hazard treatment for warranty).
much better to use compressed air or a vacuum than a hair dryer. The heat and air forces the water into places as a vapor that it cant get to as a liquid. The bag of rice works well as well. You can also put over a heat register in your house that has the fan going to move away evaporated moisture. Contact cleaner also works well as it evaporates and takes some of the dirt and moisture with it.
You are a lucky person to be able to save it. Congratulations
Hey alright it works. the alcohol is more of a last resort thing, but I like the rice idea, gonna go buy some silica gel cat litter just for this purpose.
Hey people. I have a situation here. I dropped my phone getting out of my truck yesterday and it was pouring rain, just my luck!in Vegas pouring rain. Anyway, I had no idea my phone was on the ground until about 20 or so minutes my girlfriend found it and told me about it. I immediately took it apart and put it in a bowl of rice. This morning I turned it on to see of it worked, it booted up fine. When it got to the lockscreen I couldn't unlock it. Only the right third of the screen worked .I could pull the notification drawer down but that's really it. So it put it back in rice. Now my question is, should I leave it in another day ,2 or more? Am I just screwed or can I still rescue it? Its so sad. On a serious note though, how can I go about to at least back up my stuff or can I not do that. If there is really anything I can do, please help me. The screen has no water damage, and I was under the impression that the whole screen has to stop functioning, not just a part of it. Thanks in advance, and I will check this thread later tonight since I don't have a phone and wont be home until tonight. Thanks in advance for any help/advice. Extra info, phone is rooted running CNA the black theme version by daxmax. I have a backup of aokp, I don't know if that is relevant or not.
Had that problem with an old Android when I dropped it in water. One side wouldnt work for a few hours so I tossed it back in rice. The screen eventually started working again so I assume it was still wet and needed to dry some more.
Put it back into the rice and don't touch it, the more you turn it on, the more damage it does, let it dry first, and open up your phone to wipe dry any water you see if you are comfortable with it.
Beamed from my Grouper
That's bad. My gio had a water damage before, now my screen has some water spot and my volume button is completely broken. After 6 months now my vibration doesn't work anymore. I suggest u to sell it if u found no error, because they maybe will have some problems in the future. Just my suggestion
Sent from my GT-S5660 using xda app-developers app
I must express a word of caution before trying my method of cleaning PCBs. As I do not know how sensitive the components are on the GNex board, some research/googling of certain components may be required. This is a general cleaning practice for water damaged PCBs.
You can try cleaning the motherboard with isopropyl alcohol. 70% or higher. Get an old toothbrush, clean that first, the get a shallow tray and submerge the board. Gently brush the board all over and pull it out. Next, get a hair dryer with a cold setting and blow cold air on it for a few minutes until the alcohol has evaporated. This helps clean out any water spots and corrosion that the water may have caused. Just make sure all the alcohol has evaporated. This will also help with getting any water that may be hiding and reeking havoc in small spaces.
Assemble and see if it helps.
Lastly, you attempt this at your own risk, I am in no way responsible for any damage or further damage caused by this method.
warglock said:
I must express a word of caution before trying my method of cleaning PCBs. As I do not know how sensitive the components are on the GNex board, some research/googling of certain components may be required. This is a general cleaning practice for water damaged PCBs.
You can try cleaning the motherboard with isopropyl alcohol. 70% or higher. Get an old toothbrush, clean that first, the get a shallow tray and submerge the board. Gently brush the board all over and pull it out. Next, get a hair dryer with a cold setting and blow cold air on it for a few minutes until the alcohol has evaporated. This helps clean out any water spots and corrosion that the water may have caused. Just make sure all the alcohol has evaporated. This will also help with getting any water that may be hiding and reeking havoc in small spaces.
Assemble and see if it helps.
Lastly, you attempt this at your own risk, I am in no way responsible for any damage or further damage caused by this method.
Click to expand...
Click to collapse
Will be better if you use 91% Isopropyl Alcohol, it dries faster and 70% Isopropyl Alcohol usually leave water marks. Just that 91% Isopropyl Alcohol is kinda expensive.
Beamed from my Grouper
Isopropyl alcohol is fairly cheap a couple dollars at your local pharmacy for a 500ml bottle to save a 350+ dollar phone seems pretty worth it to me. That said do not use anything less than 90% if you want to splurge you can also go the route of pure distilled deionized water (this can get rather pricey). I'd suggest disassembling your gnex as far as you feel comfortable and use the methods described by others above. Do not use any heating implement to dry anything as there is a high likelihood of warping or otherwise damaging electronic components (principally the PCB)
Well thank you all for your input, it seems my Nexus survived. I took it out of rice this morning and it was working again like a charm. No water marks, vibration works fine, and smooth sailing so far. I have taken or apart before, but I don't trust myself to clean it and mess with the motherboard. As long is it works I am happy, just ordered a new housing though, since it got a nasty scuff from dropping it. RICE is amazing is all I can say
Sent from my Galaxy Nexus using xda premium
My slippery fingers dropped the G4 in water (not salt water). Removed the battery as quick as I could and put the phone, battery into a rice bowl. Booted it up after about an hour and it's just showing me "Firmware Update" without a USB cable plugged in.
I haven't tried flashing it to anything just yet. Is it possible that the water might got somewhere into the USB port and making the phone think it's in download mode? I'm gonna dump it in the rice bowl for a few more hours.
Edit - The liquid contact indicator above the SD card is still white. The LCI on the battery is red thou.
Try replacing battery first
bender_007 said:
Try replacing battery first
Click to expand...
Click to collapse
Thanks for the advice. Now it's booting fine with both batteries (I had one extra that wasn't water damaged).
I think there's still some water left in the headphone jack since the G4 thinks it's plugged into an audio out device. I've tried cleaning the hole with some very soft cloth but no change. If I blow hard enough into the jack, it'll momentarily come out of that mode just to go back soon as I stop. I guess I just have to wait a few more hours.
Edit - When blowing air into the headphone jack, LG Voice Mate app comes up. Rather weird.
Sadly yes, it´s a known issue, first when they see the headphones they will think the phone was skinny diving
I'd like to take this opportunity to advise people not to put their phones in a bag of rice. You don't put your laundry in a bag of rice to dry it, you hang it up in a warm area with moving air. The rice and bag will keep the water in your phone longer than drying it in the sun. It works eventually, but it isn't as good as putting it on your heating vent or just in a sunny spot. By the way, I don't recommend a clothes dryer.
bender_007 said:
Sadly yes, it´s a known issue, first when they see the headphones they will think the phone was skinny diving
Click to expand...
Click to collapse
After a few more hours of rest near in a dry, warm place, the jack is back in service. Hopefully no more crazy jack again.
The battery with red LCI seems to be working fine still. Should I retire it completely?
Robert18 said:
I'd like to take this opportunity to advise people not to put their phones in a bag of rice. You don't put your laundry in a bag of rice to dry it, you hang it up in a warm area with moving air. The rice and bag will keep the water in your phone longer than drying it in the sun. It works eventually, but there's it isn't as good as putting it on your heating vent or just in a sunny spot. By the way, I don't recommend a clothes dryer.
Click to expand...
Click to collapse
Rice always seems to have worked for me. Anyway, I chose a sunny spot later on.
I have heard the opposite about rice - it is better than putting your phone on heater or using hair dryer. The best solution would be to put it in an airtight bag with silica gel (those small, white paper packages that come with your newly purchased bags and shoes).
You and everyone else have heard the same thing, but testing has shown that putting your wet phone in a bag of rice will keep it wet longer than just putting it on a counter (that's not in a locker room). And it makes sense, compare putting a wet sock in a sealed bag of rice (or silica) and another hanging somewhere, like over a heating vent. In one you've sealed the moisture in a bag, in the other you're letting heat evaporate the water and providing air to take the moisture away. It's a myth that a bag of rice is helping you.
Throwing my rice experience in here. It is TRUE. Rice does work and absorbs the moisture. My son took a swim (SWIM!) with his Atrix 4G in the DEEP END of the pool. He immediately disassembled it as I've told him to. We got rice and a bag, completely submerged in the rice and put ALL pieces (except the back) in it for 5 days in the window of our house that got sunlight. After 5 days, the Atrix booted up as good as before the swim. The trick is to disassemble right away AND DO NOT TRY TO POWER IT ON FOR MINIMUM 3 DAYS! We also shook it out until no more water was coming out of any holes. So to those skeptics, you're wrong, it does work if you have patience.
I don't doubt that a phone which has been wet, then put into a bag of rice, will eventually dry. My point is that it would have dried much faster if you had done something else. Just because your phone worked after putting it in rice, doesn't mean the rice helped you, it just means it didn't hurt enough to keep the phone from recovering. Again, try wetting 2 socks, then put one in a bag of rice, and one on a clothes line. The one on the clothes line will dry faster, but maybe the one in the rice will eventually dry also. Most people don't want to wait 5 days for their laundry, so we've found better ways of getting water out of objects.
Water will hurt your electronics in a few ways, one is that it is the universal solvent and may dissolve something (like a glue or flux) if left there too long. But most likely the biggest issue is that it conducts electricity if it has enough minerals in it. If the phone is on when it gets wet and the water has high mineral content, it's possible that some parts will just short circuit and burn out some. If most of the electronics are off, then the biggest problem is the left over residual minerals that will stick to phone parts and conduct electricity where it shouldn't, but that depends on how hard your water is. In some cases, you'd be better off washing the phone in deionized water which doesn't conduct electricity and is used in cleaning electronics.
Hello, proper panicking put my phone down in some water. What should i do?
Help please...!
Sent from my SGP521 using Tapatalk
put it in a bag with uncooked rice. forget you own a phone for at least 24 hours.
Ok the rice wont damage it any more will it.
It wasnt in it for long. And it was a very small puddle....[emoji35] [emoji35] [emoji35]
Sent from my SGP521 using Tapatalk
Uncooked rice, the more the better, will absorb the moisture. Leave it in long enough, and you should be good to go
Did the phone rest any longer in the water? If yes you should use rice and cotton pad if it wasnt all that long you don't need tovworry about it cause it's splash proof
Do not try to turn it on until the rice absorb the moisture.
Sent from my HTC 10 using Tapatalk
nathlynn22 said:
Hello, proper panicking put my phone down in some water. What should i do?
Help please...!
Sent from my SGP521 using Tapatalk
Click to expand...
Click to collapse
I wouldn't be that worried buddy, watch this vid. The rice for a day is like a guarantee just to be safe. Chances are its fine though
https://www.youtube.com/watch?v=bzh6ypmNwSg
I just put it in the airing cup oars seems good. Thanks.
Sent from my HTC 10 using Tapatalk
I accidently dropped my phone in water yesterday although I took it out almost immediately it's just totally died on me and won't start up at all, totally gutted how an expenisive phone like this can't even withstand a little bit of water.
sam-man said:
I accidently dropped my phone in water yesterday although I took it out almost immediately it's just totally died on me and won't start up at all, totally gutted how an expenisive phone like this can't even withstand a little bit of water.
Click to expand...
Click to collapse
Damn. If mine broke I'd claim on house insurance. But mine seems OK.
Sent from my HTC 10 using Tapatalk
sam-man said:
I accidently dropped my phone in water yesterday although I took it out almost immediately it's just totally died on me and won't start up at all, totally gutted how an expenisive phone like this can't even withstand a little bit of water.
Click to expand...
Click to collapse
That's weird, someone on YouTube dunked their 10 in a bowl of water for like a some amount of minutes and it worked fine afterwards. Not sure if sound was working though.
Ndaoud360 said:
That's weird, someone on YouTube dunked their 10 in a bowl of water for like a some amount of minutes and it worked fine afterwards. Not sure if sound was working though.
Click to expand...
Click to collapse
Mine's just gone dead, nothing at all, it heats up if I put it on charge.
I'll call HTC tomorrow to see if I can do a deal of some sort with them.
The rice won't do anything since the water you want it to absorb is inside the phone, where the rice won't reach anyway. The best thing you can do is open the phone up and dry it up with a blow dryer or heat gun. If this is something you can't do or are uncomfortable with doing, putting it in the oven at around 120°f (50°c) is the next best thing.
#killthericemyth
mekanismen said:
The rice won't do anything since the water you want it to absorb is inside the phone, where the rice won't reach anyway. The best thing you can do is open the phone up and dry it up with a blow dryer or heat gun. If this is something you can't do or are uncomfortable with doing, putting it in the oven at around 120°f (50°c) is the next best thing.
#killthericemyth
Click to expand...
Click to collapse
This Popular Mechanics article contradicts all of your claims:
http://www.popularmechanics.com/technology/gadgets/how-to/a3419/dry-out-your-cell-phone/
Quoted:
With the battery safely set aside, you now have one goal--dry your phone, and dry it fast. If you let the moisture evaporate naturally, the chance of corrosion damaging the phone's innards increases. Instead, blow or suck the water out. But don't use a hair dryer--its heat can fry your phone's insides. Instead, opt for a can of compressed air, an air compressor set to a low psi or a vacuum cleaner (a wet/dry Shop-Vac would be perfect). The idea is to use air to push or pull moisture out through the same channels it entered.
Finally, use a desiccant to wick away any leftover moisture.*The most convenient choice is uncooked rice.*Just leave the phone (and its disconnected battery) submerged in a bowl of grains overnight. If you're worried about rice dust getting inside your phone, you can instead use the packets of silica gel that often come stuffed in the pockets of new clothes. But acting fast is far more important than avoiding a little dust, so don't waste time shopping if you don't already have a drawer full of silica gel.
The most important thing to remember is to avoid heat. That means no hair dryers, ovens, microwaves or extended periods in direct sunlight. While heat will certainly evaporate the moisture, it could also warp components and melt adhesives.
Click to expand...
Click to collapse
pidzero said:
This Popular Mechanics article contradicts all of your claims:
http://www.popularmechanics.com/technology/gadgets/how-to/a3419/dry-out-your-cell-phone/
Quoted:
With the battery safely set aside, you now have one goal--dry your phone, and dry it fast. If you let the moisture evaporate naturally, the chance of corrosion damaging the phone's innards increases. Instead, blow or suck the water out. But don't use a hair dryer--its heat can fry your phone's insides. Instead, opt for a can of compressed air, an air compressor set to a low psi or a vacuum cleaner (a wet/dry Shop-Vac would be perfect). The idea is to use air to push or pull moisture out through the same channels it entered.
The key here is, as in so many other cases, common sense. Don't go crazy with a 1200°f heat gun and don't broil your phone.
Finally, use a desiccant to wick away any leftover moisture.*The most convenient choice is uncooked rice.*Just leave the phone (and its disconnected battery) submerged in a bowl of grains overnight. If you're worried about rice dust getting inside your phone, you can instead use the packets of silica gel that often come stuffed in the pockets of new clothes. But acting fast is far more important than avoiding a little dust, so don't waste time shopping if you don't already have a drawer full of silica gel.
The most important thing to remember is to avoid heat. That means no hair dryers, ovens, microwaves or extended periods in direct sunlight. While heat will certainly evaporate the moisture, it could also warp components and melt adhesives.
Click to expand...
Click to collapse
Believe what you want; I'm IPC certified and have been doing PCB-repairs for over four years. I'm simply sharing the knowledge you need to best deal with an issue like this.
The only thing that can actually get fried from the heat that a hair dryer produces is the battery. If you for some reason hold the hair dryer ON the battery for an extended period of time. Not that I know why you'd want to do that. Any surface mounted component on the board should be perfectly fine with direct heat up to almost 500°f.
The key here is common sense. Don't go crazy with a 1200°f heat gun and don't broil or microwave your phone.
mekanismen said:
Believe what you want;
...
The only thing that can actually get fried from the heat that a hair dryer produces is the battery. If you for some reason hold the hair dryer ON the battery for an extended period of time. Not that I know why you'd want to do that. Any surface mounted component on the board should be perfectly fine with direct heat up to almost 500°f.
Click to expand...
Click to collapse
I believe that uncooked rice is a desiccant, and can wick-up proximate moisture.
You can stick your phone (battery removed, of course) in the oven at 500°F.
I decline in spite of your "qualifications" on the grounds that 63/37 has a melting point of 370°F [edit]361°F (pardon)[/edit].
If you told me you never messed up a single component by holding the iron on it too long, I wouldn't believe you.
pidzero said:
I believe that uncooked rice is a desiccant, and can wick-up proximate moisture.
You can stick your phone (battery removed, of course) in the oven at 500�°F.
I decline in spite of your "qualifications" on the grounds that 63/37 has a melting point of 370�°F.
If you told me you never messed up a single component by holding the iron on it too long, I wouldn't believe you.
Click to expand...
Click to collapse
Proximate moisture as in moisture it is in fact in contact with. The water the rice is able to absorb isn't water that does any harm to the phone anyway, hence the uselessness. Or are you saying that the rice somehow magically sucks the moisture out through the speaker and microphone grills?
63/37 does indeed melt at 370°f, but applying 500°f using a heat gun for a minute or two from a couple of inches distance will not make the solder reach that kind of temperature. I never recommended anyone to put their phone in an oven at 500°f.
If I said that I never messed up a single component by applying too much heat I'd be lying. I've done it too many times to count.
Anyway people, feel free to put your phone in a bag filled with edible seed of your choice , but don't be surprised if starts acting up a couple of days later.
mekanismen said:
Proximate moisture as in moisture it is in fact in contact with. The water the rice is able to absorb isn't water that does any harm to the phone anyway, hence the uselessness. Or are you saying that the rice somehow magically sucks the moisture out through the speaker and microphone grills?
63/37 does indeed melt at 370°f, but applying 500°f using a heat gun for a minute or two from a couple of inches distance will not make the solder reach that kind of temperature. I never recommended anyone to put their phone in an oven at 500°f.
If I said that I never messed up a single component by applying too much heat I'd be lying. I've done it too many times to count.
Anyway people, feel free to put your phone in a bag filled with edible seed of your choice , but don't be surprised if starts acting up a couple of days later.
Click to expand...
Click to collapse
In hindsight of my original reply to the OP, it would have been wise to include instructions on drying the phone by means of draining through the introduction path and using compressed air. The OP would have benefited from the information.
It is unnecessary for a desiccant to have direct contact with water. If desiccants didn't absorb moisture, they wouldn't be in the packaging of everything from shoes to medicine to electronics.
It is important that most water be eliminated by other means first, but the dry rice will absorb, with time, remaining moisture, just like dry air climates reduce drenching sweat from your body on a hot day.
pidzero said:
In hindsight of my original reply to the OP, it would have been wise to include instructions on drying the phone by means of draining through the introduction path and using compressed air. The OP would have benefited from the information.
It is unnecessary for a desiccant to have direct contact with water. If desiccants didn't absorb moisture, they wouldn't be in the packaging of everything from shoes to medicine to electronics.
It is important that most water be eliminated by other means first, but the dry rice will absorb, with time, remaining moisture, just like dry air climates reduce drenching sweat from your body on a hot day.
Click to expand...
Click to collapse
Okay so let's say that the rice somehow WILL absorb the moisture. Even in this case it will work way too slow, things start to corrode within hours (or minutes, dependent on what kind of liquid the phone has been dropped in). You don't want a fix that takes days or weeks, you want the moisture out as soon as possible.
mekanismen said:
Okay so let's say that the rice somehow WILL absorb the moisture. Even in this case it will work way too slow, things start to corrode within hours (or minutes, dependent on what kind of liquid the phone has been dropped in). You don't want a fix that takes days or weeks, you want the moisture out as soon as possible.
Click to expand...
Click to collapse
I admit, I would like to get to the bottom of this.
After some more research, I agree, it may take more time than ideal.
Cat litter has even more drying power than rice. Its cheap and readily available.
Infact, the article I get that info from http://smartphones.wonderhowto.com/...st-way-save-your-water-damaged-phone-0154799/ places uncooked rice low on their list of drying power:
The Sponge Test
Pre-weighed sponges soaked with water (and then weighed again) were used in this experiment.
...
Each sponge was placed on top of wax paper, to prevent direct contact with the drying agents, since in a smartphone, there is normally no direct contact with the drying agent.
Uncooked White Rice Ain't Cutting It
After 24 hours, the sponges were weighed again to see how much weight had been lost. And would you believe it—according to the results, uncooked white rice placed dead last in effectiveness as a drying agent. Here's the list, from best to worst.
Open-air sponge - 7.6 mL lost
Silica gel - 6.1 mL lost
Cat litter - 5.5 mL lost
Instant couscous - 5.0 mL lost
Instant rice - 5.0 mL lost
Instant oatmeal - 5.0 mL lost
Uncooked white rice - 4.0 mL lost
Sealed-container sponge - 0.7 mL lost
Cat litter, instant couscous, instant rice, and instant oatmeal all performed better than uncooked white rice—everyone's favorite damn drying agent.
Click to expand...
Click to collapse
I rescind my argument for rice. I give you credit for calling it pretty much useless. There are better desiccant alternatives.
Personally, I'd rather use cat litter than blow-dryer--not because I argue that it works better, but that I have cat litter, and no blow-dryer.
We agree that 500°F in the oven is ill-advised, and I am glad for that.
My Phone(OnePlus 3) Was Sinked Accidentally & Now My Phone Won't Turn On...
M.Dinesh said:
My Phone(OnePlus 3) Was Sinked Accidentally & Now My Phone Won't Turn On...
Click to expand...
Click to collapse
Put it in a bag of rice, it might work.
I heard putting it in destilled water does help ro wash out the minerals from regular water. And after that let it dry some time.
But better google that again yourself before im telling bull**** here.
i just wanted to give my experience with electronics in water.
If you submerge your device in water the first few hours are critical. First you must power down the device and if so remove the battery doing so might prevent a short and kill the device. If you can, rise the phone with distilled water. (Its not the liquid that kills electronics its the minerals in water that will cause the short. ) Shake any water you can out of the device. If you have access to desiccant packs, like the ones you find in beef jerky or new shoes. place them in a sealed container. if you dont have access to them, you can use rice but this will not be as effective as actual desiccant. Allow a lot of time for the moisture to evaporate. its going to take a while because the phone is semi sealed and its hard for water vapor to escape.
Enjoy your Oneplus 5!
Guysss! My Drowned Oneplus 3 Is Back to life... But the issue is rear camera and capacitive buttons are unfunctional.
M.Dinesh said:
Guysss! My Drowned Oneplus 3 Is Back to life... But the issue is rear camera and capacitive buttons are unfunctional.
Click to expand...
Click to collapse
Keep it in there a little longer I would say... Distilled water might safe your camera.. I'm pretty sure it has to do with the contact points.
A lil longer is not two hours btw. We talk about 2-3 days of waiting.
Buddiess... Finally My phone recovered only thing , the recent capacitive button ain't working .. other than that no issues with it... thanks for your help guys!
Seems like waiting and not risking the phone to die completely is impossible here... Good luck then.