[Q] Problems with Flash 10.1 in 2.2 - EVO 4G Q&A, Help & Troubleshooting

Here's the deal:
I installed the unofficial flash 10.1 for 2.1 (which didn't work btw) and proceeded to install the OTA update to Froyo. This is where the problems began. The browser suddenly closed every time I opened a site with flash. I searched the forums and found a solution that was to install a version (10.1.61.68) of flash prior to the one froyo has which is 10.1.72.7.
Now my problem is that everytime I install the working version (10.1.61.68) and reboot my phone reverts back to the 10.1.72.7 and I need to manually install the other version again. Is there anything I could do to prevent re-installing the program over and over again?

Did u wipe when moving to froyo? Just wipe and reflash. Flash 10.1 is built into the EVO Rom so u don't have to try to install again.
Sent from my HTC EVO 4G.

Related

[Q] Stuck at bootscreen after every single custom ROM flash.

hi
I´ve rooted and flashed my desire several times. rooted with unrevoked3 everytime and tried different roms like leedroid 2.2d, 2.2 f and rcmixhd 0.13. First time i did it i flashed leedroid 2.2d and it worked fine. After 1,5 months running leedroid my phone rebooted due to the overheating problems that 50 % of us suffer from (i rebooted it manually several times during those months and it worked until this day).
It got stuck at the bootupscreen with white background and green HTCtext. couldn´t install RUU via windows, had to grab the PB99IMG.zip onto my SD and boot into bootloader and restore my phone this way. Then i rooted it AGAIN, and flashed rcmixhd 0.13. Success! But only until i rebooted it manually, stuck at bootupscreen again.
I restored the phone from SD with pb99img as earlier. Flashed rcmixhd again and made sure i wiped everything (dalvik, cache, formatted sdcard and created a EXT), success! Until i rebooted my desire...back again.
Now im running stock non-rooted froyo. I´m getting tired of spending the night fixing it but i still want to use senseHD and i like tweaking stuff..
Do any of u guys recognize this problem and what can i do to fix it?
If any of you are from sweden, plz answer in swedish!
Same problem here, the only way i got to install a custom rom was by installing update-cm-6.1.0-Desire-signed.zip. Then installed a custom rom by using the "Rom Manager" tool.
Downloading and flashing through recovery mode, "No, can do!"
Ok, but "update-cm-6.1.0-Desire-signed.zip" isn´t that a custom ROM? Did you install that through ROM manager?
And did you flash another ROM on top of it?
Suddenjr said:
Ok, but "update-cm-6.1.0-Desire-signed.zip" isn´t that a custom ROM? Did you install that through ROM manager?
And did you flash another ROM on top of it?
Click to expand...
Click to collapse
yes this is a custom rom, i did a normal flash first to "update-cm-6.1.0-Desire-signed.zip" (some how that worked???). Then i reflashed through the "ROM manager" tool.
Do you remember to always wipe everything in Recovery before flashing a new rom?
Seems like I always used to have a bootloop or bootfreeze when did not do the proper wipe.
remmyhi said:
Do you remember to always wipe everything in Recovery before flashing a new rom?
Seems like I always used to have a bootloop or bootfreeze when did not do the proper wipe.
Click to expand...
Click to collapse
i wiped everything even the Dalvik Cache, didn't help a thing.
Could is be that is has something to do with rom's that are not signed?
I have this same problem now, any possible sollutions?
Perdonally i would suggest to reformat your sd cards and try again. Dont forget to wipe everything.
Sent from my LeeDroided Desire HD
Happend to me once or twice.
What to do is, Turn of the phone take out battery do the neccessary wipes and formatting,
root
install clockwork mod from market, go to it and choose install recovery
install rom
install kernel (might affect it somehow)
reboot

[Q] Unresponsive after flash sbf

I tryed installing cm7 on my Defy (mb25 telstra version)
I followed the guide, flashed it with the Official Froyo Korean v3.4.2-74 fixed SBF and then went into clockwork mod and installed cyogenmod.
Couldn't get it load up so i flashed back to the original stock firmware(eclair)
Now it loads into android but just becomes unresponsive.
Same thing happens when i try other stock sbf's aswell
Any ideas?
OK MANAGED TO SCROLL THROUGH TO FACTORY DATA RESET AND NOW IT WORKS
Install nordic 1 or 2 nandriod and then flash cm7 onto it

Firmware Issues

Howdy!
I am in the UK on Vodafone, and was running CM7. This was installed over the UK Froyo update supplied via the Motorola Update tool.
All was well, until my phone randomly went off. When I turned it on there was nothing but fleeting glimpses of the CM7 loading screen (as if the screen was flickering on and off).
The only way that I could get the phone working again was to follow this procedure found in Zephyrot's Defy Beginner's Guide:
Installed full Gingerbread SBF and can’t go back to another rom: aha! We have a issue here!, latest Stock Gingerbread full SBFs comes with a Version 5 of the CG, meaning until not long ago you were pretty much screwed. But wait, there is hope! A one kind Éclair has been found in China Defys that comes with Version 5 CG!.
How to fix it:
Download this SBF and Flash it
Root your Phone
Download 2nd Init and Install ClockworkMod Recovery
Download and install this Nandroid Backup
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
You WONT be able to install full SBFs of any Éclair or Froyo since these Androids have lower CG Versions.
This leaves me with a working version of Froyo. I did not install a full Gingerbread.sbf previously, and the backup that I made before installing CM7 leaves me without anything happening also.
What I would like to know is how to get back on to CM7 if possible? If I try and flash any .sbf the phone goes dead and I have to start again with the process above. If I install 2nd Init/clockworkmod on the Froyo that I can get to work as a result of the above process the phone goes into a boot loop and I can't get into stock recovery or anything, so end up having to go back through the process again. Does anyone have any ideas, or am I stuck forever now?
Edit - just finished restoring it for the 50th time and wanted to add that the version that I can get to work is
Moto_Version34.179.2.MB525.Retail.en.CEE
Firmware Version: 2.2.2
Build Number JOREM_U3_3.4.2_179-2
You need to go into stock recovery (power + down I think) next press both volume keys. Wipe cache and data. Next reboot into motorola flash tools and install a fixed sbf of a froyo ROM. Next install CM7 if you want. You can find/make the fixed sbf in the beginners guide.
If you install CM first wipe everything in custom recovery.
Sent from my MB525
I've done that and no luck, sometimes the phone has booted up and frozen on the red M, other times it has been totally unresponsive. The only Froyo ROM that I can get to respond is the fixed one linked in the guide, which won't let me install custom recovery. I'll try again with some different fixed ROMS tonight. Thanks
when does this happen? When you install froyo or CM7
Sent from my MB525
It seems like you can't downgrade that easy. The fixed sbf removes the system files. You need to install a nand backup first. But you can't install cwm to install a nand without root access. Check the page of the ginger you installed. I think it can by now. Also check CM7 page as a member seemed to can use stock recovery.
Sentrestore from my MB525
I'll do some more searching when I get to my laptop with everything on. Essentially the only version of Froyo that I can install won't let me run CWM (it installs with no problems, I can root the phone without any issues). It just gets stuck in a boot loop as soon as I try to restart the phone. I can't get into stock or custom recovery at this point to wipe data/cache.
I tried with a nand backup and fixed sbf, but will try some different combinations. I still have my initial nand backup from before I started flashing anything. I'll do some more rooting around later on. I suppose I have a working phone for now, just not how I would like it!
Thanks

Help with reinstalling factory rom

I rooted my Evo a few days ago. I removed some of the factory programs that I did not use and now I want them back. I have 2.3.3 on the phone. I tried to download the rom and install it. I used rom manager and Clockworkmod both and I got a error status 7. Can anyone point me in the right direction to reinstall the factory rom?
Thanks
Have the same issue with mine i cannot get it to load anymore.
Both of you need to go to the development section, then seach for a stock 4.24....rom. Do a full wipe, then flash it in recovery and you'll be set.
I would suggest finding stock PC36IMG flash thru hboot!

[Q] Help with installing newer ROMS

Hello, I could use some help with my Desire.
A few months ago I rooted my HTC Desire (Bravo, EU version) with Unrevoked3 and then tried a couple ROMS, like CM6 and MIUI. The installations all went fine without any problems and the ROMS worked as advertised.
I decided to go back to the stock 2.2 because of some app compatibility issues, using the backup I made from the recovery tool and have stayed with it since.
Now, whenever I try to install a newer ROM, like Aurora v04 or PyramidMod007, the installation never works, even though I always wipe/factory reset/wipe Dalvik cache before installing. The post-installation booting always freezes on the HTC logo screen for more than 20 minutes and I'm forced to remove the battery and restore my backup image.
The only ROM that I've tried and works is the latest MIUI.
Can anyone tell me what I'm doing wrong?
Are you wiping?
Are you downloading versions that fit in the stock hboot, NOT cm7 hboot?
Are you following ALL the instructions/requirements in the rom threads, including required partitions on SD card?

Categories

Resources