Develop Bugs

Suggestions for a Protective Cover

I've had my dash now for 6 months and noticing im becoming less and less careful with it. I just saw on Amazon.com there are a few to choose from. I like to keep my phone in my pocket.
Any info or suggestions on what everyone else uses and likes would be greatly appreciated.

#2! said:
I've had my dash now for 6 months and noticing im becoming less and less careful with it. I just saw on Amazon.com there are a few to choose from. I like to keep my phone in my pocket.
Any info or suggestions on what everyone else uses and likes would be greatly appreciated.
Click to expand...
Click to collapse
Do a search for black aluminium in this forum and you will find some cases and people choices.
Link as i'm now @ computer

stylez said:
Do a search for black aluminium in this forum and you will find some cases and people choices.
Click to expand...
Click to collapse
Didn't find much help in that thread. Just long discussions about whether aluminum cases block signals.

#2! said:
Didn't find much help in that thread. Just long discussions about whether aluminum cases block signals.
Click to expand...
Click to collapse
There are some links from Pudge and also views on cases i was just about to say that it's not exact subject but there are some ideas.
I use a leather case.
There is a selection on here http://www.wirelessground.com/tdahtcexac.html reason i gave other link is as the Aluminium cases look very sturdy.

Iv been leaning towards the cheaper silicon covers or clear plastic snap on's but I wanted some insight of whether they are worth having or if i should just save my pennies to buy a cool aluminum or leather cover.
I like the idea of having the screen covered though.
Thanks for the info Stylez.

#2! said:
Iv been leaning towards the cheaper silicon covers or clear plastic snap on's but I wanted some insight of whether they are worth having or if i should just save my pennies to buy a cool aluminum or leather cover.
I like the idea of having the screen covered though.
Thanks for the info Stylez.
Click to expand...
Click to collapse
I used to use a silicon case on the MDA Compact but found that crap would get between the silicon and the phone, the leather case does me as i only tend to have the case on when leaving the house but the Aluminium cases do look pucka and bet they would keep the phone in better shape for longer.

I really like the silicon covers... they are not bad in my opinion... you can get them for like less than 5 dollars off ebay...

I have a couple of the plastic covers and they are great. I wish they were rubbery (there are some that are) but the durability is great, they have protected my Dash very well. I only had one silicone cover and my complaint with it was pocket lint.
If you are a pocket person, I think you will like the plastic. If you are not, the silicone is "grippier" and thinner. I cant comment on the metal ones, they always scared me.

Haha metal ones look weird in my opinion. And yes I agree with you on the pocket lint... sometimes that is a pain...

rubberized cover
this is the one I have on mine and I've dropped it a few times and its quite strong against scratches and it cradles it pretty well. The downside is if your phone happens to freeze from overclocking or from doing tweaks, its a pain in the butt to remove for the battery or to change the sd card. To me is so worth it. http://cgi.ebay.com/New-Black-Rubbe...4|66:2|65:12|39:1|240:1318|301:1|293:1|294:50

this the case i am using , http://www.wirelessground.com/tdaboglsccec.html
i needed a belt clip style to match the custom made setup i have in my vehicle from a previous phone .
holds the phone upright and secure in my field of vision even if i roll over ( yes it is an offroad vehicle ) i will try to get a pic uploaded tonight.
also , it can fit over a 1550 Mah extended battery , if you remove the back cover .

I´m using this and I love it!
and very cheap
http://www.boxwave.com/products/flexiskin/flexiskin-htc-excalibur_2351.htm

orb3000 said:
I´m using this and I love it!
and very cheap
http://www.boxwave.com/products/flexiskin/flexiskin-htc-excalibur_2351.htm
Click to expand...
Click to collapse
Dose covering the top set of buttons impair the use in any way??
I wouldn't mind covering all the buttons if they all worked. Kinda like a keyboard condom.

Cases finally showing up on eBay

I've been searching every couple days since the phone was released only to find the shields, glare protectors, and skins... Finally they have the low cost cases that many users have come to love...
Judging by the looks on some, I'm not saying they are grade A, but having bought some for past phones, they are comparable to some of the $30 cases sold at some retailers
Example: cgi.ebay.com/Red-Hard-Snap-Case-Samsung-Captivate-AT-T-/270618346984?pt=PDA_Accessories {Sorry can't post links}

This is the same case (and seller) I have except mine is black. It looks, works, and feels great... Though it is a little hard to take off once it's on.
Sent from my SGH-i897

whats that case material called thats like not the rubbery silicone, but not a hard case? Its like a soft plastic that doesn't have a rubber texture.

eatkabab said:
whats that case material called thats like not the rubbery silicone, but not a hard case? Its like a soft plastic that doesn't have a rubber texture.
Click to expand...
Click to collapse
if the material you're describing is what I'm imagining (and as counter-intuitive as it sounds) it's rubberized crystal cases. (like the one in the first link)
it doesn't feel "rubbery", it feels smooth and soft-textured. nothing at all like the rubber you'd find on a shoe or tire.

eatkabab said:
whats that case material called thats like not the rubbery silicone, but not a hard case? Its like a soft plastic that doesn't have a rubber texture.
Click to expand...
Click to collapse
I believe you are thinking of TPU (Thermoplastic polyurethanes)? It's generally a material that is flexible but very smooth, and usually translucent.
Unfortunately I don't think there are any TPU cases yet for Captivate, but I think they are coming (they have them for the standard Galaxy S / Vibrant), but that's what I am waiting for as well.

pinoymutt said:
I believe you are thinking of TPU (Thermoplastic polyurethanes)? It's generally a material that is flexible but very smooth, and usually translucent.
Unfortunately I don't think there are any TPU cases yet for Captivate, but I think they are coming (they have them for the standard Galaxy S / Vibrant), but that's what I am waiting for as well.
Click to expand...
Click to collapse
yeah! whats the trade name for that stuff? Lexon or something, no?

eatkabab said:
yeah! whats the trade name for that stuff? Lexon or something, no?
Click to expand...
Click to collapse
Per Wikipedia, they have several trade names (but seems mostly from Pharma)
ELASTOLLAN (BASF & Elastogran)
PEARLTHANE (Merquinsa)
DESMOPAN (Bayer)
PELLETHANE (Dow Chemical) Sold to Lubrizol.
ESTANE (Lubrizol)
IROGRAN (Huntsman)
But in terms of cases, the only trade name I know of is that I believe Amzer calls their line of TPU cases "Luxe." Other places usually refer to the cases either as TPU or "Flexi Skin."
I'm personally waiting on the "Luxe" line from Amzer to be released at the end of the month for the Captivate.
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88849.htm

I got the black version of this case and I'd say it's by far more attractive and more protective than the overpriced crap they have at the AT&T store.
I attached some pictures. Yeah, I rigged up a cradle for the phone out of some large zip-ties, and I must say, it works great. Don't be dissin'!

Yep, that's exactly the same one I have. The one thing I would say to notice about this is, that without a screen protector, and if you keep it in your pocket... this case just seems to be a "force dirt to collect in certain places" device. (Keep it in your pocket for a day or two and then take it off and see how much dirt is chilling out under your case)

cpc71783 said:
I got the black version of this case and I'd say it's by far more attractive and more protective than the overpriced crap they have at the AT&T store.
I attached some pictures. Yeah, I rigged up a cradle for the phone out of some large zip-ties, and I must say, it works great. Don't be dissin'!
Click to expand...
Click to collapse
Dude, that is an AWESOME zip-tie stand! EXCELLENT work!

Mmm.. I'm thinking of getting this one:
cgi.ebay.com/Samsung-Captivate-i897-New-Accessory-Case-Cover-/140438789201?pt=PDA_Accessories#ht_2551wt_1137
or this one:
cgi.ebay.com/Rubber-Black-Hard-Case-Cover-Samsung-Captivate-i897-/350383516190?pt=PDA_Accessories#ht_2394wt_911
what do you guys think would be good

pinoymutt said:
...
I'm personally waiting on the "Luxe" line from Amzer to be released at the end of the month for the Captivate.
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88849.htm
Click to expand...
Click to collapse
Thats the one I want as well. Mainly cuz its got some cushion like the silicone ones but doesn't stick in your pocket like the silicone ones...
Only problem I have with it is the pattern on it. Its a nice pattern, but coming from the world of bberry, its been done and over done. I feel it might look a little busy with the translucency/being able to see all the original case detail under it.

any private messages with links to a case would be much appreciated. My captivate is due to touchdown on Monday.

Amzer Luxe style gel cases are available now at fommy dot com.
I originally owned the Body Glove, but was somewhat disappointed while testing GPS fixes to learn that it actually reduced GPS reception. I'm hoping the translucent/non-black Luxe will fit the bill.

K-mart Shopper said:
Amzer Luxe style gel cases are available now at fommy dot com.
Click to expand...
Click to collapse
Has anyone actually received one of these Amzer cases? Can they please just let us know how they like it?
Much appreciated

K-mart Shopper said:
Amzer Luxe style gel cases are available now at fommy dot com.
I originally owned the Body Glove, but was somewhat disappointed while testing GPS fixes to learn that it actually reduced GPS reception. I'm hoping the translucent/non-black Luxe will fit the bill.
Click to expand...
Click to collapse
can anyone else confirm this?

pinoymutt said:
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88849.htm
Click to expand...
Click to collapse
I believe this is available now. This looks very nice. Much better then the all black. Prob order it tonite.
Sent from my Nexus One using XDA App

Is there another place I can get the hard snap on cases other than ebay? Keep trying to catch them with some in stock at the store and they never have them...and I'm sure they are like $30 there...

[Q] Good Portfolio Case? (not the Moto one)

I was looking for a good portfolio case for my XOOM. I was looking for something like the iPad cases where they are portfolio style and is made of soft material so my xoom doesn't get scratched up...
any ideas?

I just ordered my xoom so I'm waiting for it to ship before I order a case, but I'm planning on getting this one:
http://www.amazon.com/Quality-Leath...3ZW6/ref=sr_1_6?ie=UTF8&qid=1310795929&sr=8-6
I saw it mentioned in another thread and it seems like all of the Ayl cases get pretty great reviews. The exterior is leather and the interior is microfiber so it shouldn't scratch. Plus, at only $10 it's much more affordable than some other cases out there.

CC Lemon said:
I just ordered my xoom so I'm waiting for it to ship before I order a case, but I'm planning on getting this one:
http://www.amazon.com/Quality-Leath...3ZW6/ref=sr_1_6?ie=UTF8&qid=1310795929&sr=8-6
I saw it mentioned in another thread and it seems like all of the Ayl cases get pretty great reviews. The exterior is leather and the interior is microfiber so it shouldn't scratch. Plus, at only $10 it's much more affordable than some other cases out there.
Click to expand...
Click to collapse
Wow! Nice. 10 reviews and all rated it 5 stars. I'm going to order one right now!
Thanks a bunch.

Np... Hope I didn't point you in the wrong direction, but based on the reviews, it seems like it should be pretty good. Be sure to post a review or something when you get it because you'll probably get it before I order mine lol.

i dont understand you people. that's exactly the same as the leather moto folio.

patass said:
i dont understand you people. that's exactly the same as the leather moto folio.
Click to expand...
Click to collapse
Sure, the design is based on the leather moto folio, but the price is probably the key point here.

Esoth said:
Sure, the design is based on the leather moto folio, but the price is probably the key point here.
Click to expand...
Click to collapse
Warning...if it is just like the Moto leather folio, the channels cut for viewing angles may be too shallow for some as the Xoom has a tendency to collapse at steep angles. Maybe you will not have the problem. Just saying.
...zoom posted...

patass said:
i dont understand you people. that's exactly the same as the leather moto folio.
Click to expand...
Click to collapse
Yeah but the Motorola one is $39.99........

CC Lemon said:
Np... Hope I didn't point you in the wrong direction, but based on the reviews, it seems like it should be pretty good. Be sure to post a review or something when you get it because you'll probably get it before I order mine lol.
Click to expand...
Click to collapse
Yeah when I get it. I'll post something about it under the Accessories section.

patass said:
i dont understand you people. that's exactly the same as the leather moto folio.
Click to expand...
Click to collapse
It's the same basic concept with a fair amount of key differences...
-fasteners have a different design
-inside is line with microfiber to prevent scratches (which is a common complaint for the moto)
-exterior is all leather, including fasteners
-as mentioned, lower price. Even if everything was the exact same, you get it for 1/3 the price.
Based on the reviews, it's the same idea with better execution.

I am one of the reviewers on Amazon. It's a fantastic case and for 10 bucks, come on it's a no brainer. I'd definitely recommend this over all the existing leather cases out there now. And who knows when this discounted price ends, its original price is more like 30 bucks.
lpasq said:
Warning...if it is just like the Moto leather folio, the channels cut for viewing angles may be too shallow for some as the Xoom has a tendency to collapse at steep angles. Maybe you will not have the problem. Just saying.
...zoom posted...
Click to expand...
Click to collapse
It stays in the angles without budging, but I admit that because the surface is microfiber suede it may be slippery if you jab hard at the top of the xoom. There is no problem if you type at the bottom half of the screen. And normal presses and swipes on the screen are ok. Just don't jab hard repeatedly at the top 1/3 of the screen and you should be fine.

Targus cases are great quality, at least my P1000 Galaxy Tab one genuine leather was perfect.
The Xoom one sells for like $45+ shipping etc at Amazon. They are really good I think. Worth the price.

I guess I'm an idiot for waiting... the ayl case is now $5 more than before. Not a whole lot, but still wasted money from waiting. Oh well. I just placed my order and I'll be sure to give a review or contribute to another thread on the case once I receive mine.
I should be getting my xoom tomorrow, so I'll have time without a case to make me appreciate having a case even more.

I got one of these from ebay.
http://cgi.ebay.com/Folio-Leather-C...?pt=US_Tablet_Accessories&hash=item2a0fc629f8
$10 with free shipping. Works great.

Care to give a review about the $10 folio...
Sent from my LG-P999 using XDA App

musashiken said:
I am one of the reviewers on Amazon. It's a fantastic case and for 10 bucks, come on it's a no brainer. I'd definitely recommend this over all the existing leather cases out there now. And who knows when this discounted price ends, its original price is more like 30 bucks.
It stays in the angles without budging, but I admit that because the surface is microfiber suede it may be slippery if you jab hard at the top of the xoom. There is no problem if you type at the bottom half of the screen. And normal presses and swipes on the screen are ok. Just don't jab hard repeatedly at the top 1/3 of the screen and you should be fine.
Click to expand...
Click to collapse
I just have a quick question about the AYL case, is the closure magnetic? I can't seem to find any confirmation that it is (looks like it in the pics), or in the reviews.
Thanks.

guitarguy said:
I just have a quick question about the AYL case, is the closure magnetic? I can't seem to find any confirmation that it is (looks like it in the pics), or in the reviews.
Thanks.
Click to expand...
Click to collapse
It is not magnetic. But the cover closes very tightly onto the xoom, so there are no worries about the cover flipping out on its own. You have to shut the cover with some force actually, but the suede inner lining will not scratch it.

musashiken said:
It is not magnetic. But the cover closes very tightly onto the xoom, so there are no worries about the cover flipping out on its own. You have to shut the cover with some force actually, but the suede inner lining will not scratch it.
Click to expand...
Click to collapse
Hey, thanks for the quick reply! So I guess it's just like a clip that goes over the top of the device? I just wanted to make sure it wasn't velcro, I hate that crap, lol!
Just ordered, but unfortunately it seems like they are out of stock for the moment... Gonna have to wait a few weeks it seems...

I bought the ZooGue case. I really like it. The onlu thing wrong was that it has a funny smell. Took care of that with vinegar and water and now the smell is gone. The stand is adjustable because the bottom was flat and there is velcro to adjust the view.

Dual_Everything said:
I got one of these from ebay.
$10 with free shipping. Works great.
Click to expand...
Click to collapse
yes if you don't like supporting Real US Sellers and tanking our economy further. i realize buying american products is impossible but the few dollars more to buy from american sellers is a small price to pay to support our country. China is now 7 months away from being the riches country in the world kind of scares me??

air cooling case for GN. (pic inside)

Actually, I really dont know how to describe such case.
Since there many holes on the back and might be help for to cool down GN.
So I just call it air cooling case.
There're also other kind of case with holes on ebay and taobao. But they are
too rough and too ugly. Usually cost around 3RMB,but u won't want to put it
on your GN which might scratch ur GN.
I bought this one around 10USD. And the color is green with little bit metal
feeling.
The only disadvantage is: It won't fit with 2000mah battery. So u can only use
1750mah battery with it.

looks nice. could you post a link?

Link please

here it is.
http://item.taobao.com/item.htm?id=16457320483

Found it
http://www.ebay.com/itm/GENUINE-SAM..._MobilePhonesCasesPouches&hash=item3a74838c1a

Very nice looking mesh case and didn't know they made them. If you're worried about heat i would just undervolt the nexus. But this definitely gives it a unique look.
Sent from my Galaxy Nexus using XDA

http://www.ebay.com/itm/GENUINE-SAM...-LOOK-COOL-MESH-VENT-CASE-COVER-/251062880001
Black one looks great! Might pick one up... Kinda pricey for a generic though.
Seems cheaper from the company: http://www.anymode.com/shop/goods/goods_view.php?goodsno=12347476
But I don't read Korean enough/at all to figure out if they ship to Canada or how to checkout.

Anymode cannot be considered generic
"Anymode, a privately held company founded in Korea in 2007, has the strong affiliation with Samsung Electronics for key accessories supplier globally."
---------- Post added at 09:09 AM ---------- Previous post was at 09:07 AM ----------
Also is it just me or did anyone else notice it does not have an opening for the Pogo pins?

Point taken. Now find it for me somewhere that's cheap

osm0sis said:
Point taken. Now find it for me somewhere that's cheap
Click to expand...
Click to collapse
Plenty of cheap ones.
These are called "Mesh snap on" cases.
Here's for the GSM Nexus: http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1313&_nkw=i9250+mesh&_sacat=0
$1.92
There's no "snap on mesh" cases for the Verizon, they're more fully formed so it's not cheap.
$7-$9 http://www.ebay.com/sch/i.html?_nkw=i515+mesh&_sacat=0&_odkw=i9250+mesh&_osacat=0

Those are the cheap feeling ones the OP described. I was asking for a link to a cheaper site for the Anymode version the OP recommended. Thanks though!

99.9% anti-bacterial
Nice!

this is not going to cool your phone, you are adding another layer of plastic to trap heat. do you cool yourself by wearing a sweater?

neotekz said:
this is not going to cool your phone, you are adding another layer of plastic to trap heat. do you cool yourself by wearing a sweater?
Click to expand...
Click to collapse
The "air cooling" is just a term to describe this case. Just a comparison
between other TPU or silicon case.
Of course no case is the coolest!

osm0sis said:
Those are the cheap feeling ones the OP described. I was asking for a link to a cheaper site for the Anymode version the OP recommended. Thanks though!
Click to expand...
Click to collapse
Like I post in the beginning. I got it from Taobao,which is the cheapest source.

Look a little like nillkin hard case, I have the one with brown color with around 7$
http://www.casesss.com/product.aspx?model=62&pid=337

Saintfyre said:
99.9% anti-bacterial
Nice!
Click to expand...
Click to collapse
Where do you see this?

Anymode Galaxy Nexus Cool Case
frigidazzi said:
Where do you see this?
Click to expand...
Click to collapse
Right there on the box!
Great case! I ended up getting it from eBay since I can't read Korean/Chinese nor trust signing up with credit card info to foreign websites I don't understand. Nice matte finish on the black one here. Feels solid, snug and good in the hand. The wrap-around to the front leaves just enough of a gap between housing and screen that edge-to-edge screen protectors should work nicely. And the design and materials seem excellent for signal, WiFi and NFC (unlike my last case)! Would definitely buy again.
Very, very pleased... now I just need my Fantom tempered glass screen protector:
http://rootzwiki.com/topic/25298-ho...erested-in-a-tempered-glass-screen-protector/

nxt said:
There's no "snap on mesh" cases for the Verizon, they're more fully formed so it's not cheap.
$7-$9 http://www.ebay.com/sch/i.html?_nkw=i515+mesh&_sacat=0&_odkw=i9250+mesh&_osacat=0
Click to expand...
Click to collapse
Those ones don't really count. The pictures show a full case with the snap on mesh that goes over it. So the mesh on those cases is just for looks.

My issue with these mesh cases is that dust collects in the holes REALLY easily. :\

X-Level clear TPU case, for the minimalist case user! (Pixel 2 XL)

Just received some of the Clear X-Level TPU case I found and ordered, it is .78mm with clear matte edges all around that feel great in hand.
https://photos.app.goo.gl/YNDccnTmGaIv250z1
The case is similar to the 'MNML' case in that it does not provide a lip for the screen, but it does hug the screens curves to provide a bit more protection in case of accidental drops since it is made of TPU. Dont get me wrong, it is not not a drop proof case at all, but even thin TPU material can absorb more of an impact than hard plastic, and with a good screen protector you're set. The camera is also ever so recessed enough that it wont hit flat surfaces when placed on them. The buttons are also feel great and tactile.
The only thing that may bother some, but doesn't bother me since it isnt that noticeable from afar, is that even though it has the "dot buffer" most clear tpu cases have, it still shows some "water markings" where the case meets the back glass. This is likely because of how thin the case is, and how the back glass curves and melts into the 2 XL's corners. The case will also likely yellow and scratch over time, but that is why I got a small supply lol. I'll be able to swap them out as needed since it will be my daily for a while.
(On a side note) If anyone is interested I would also be wiling to sell some of the extra I have. I know it sounds like an ad for me to sell... but I just feel I got more than I needed.. and it seems these are hard to get in the US for some reason. So if you are just let me know, id do $12 shipped, first class, US. If you want more than one Id do a deal cause of shipping as well! If I have more than one left i want to sell that is lol

I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.

scottjal said:
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
Click to expand...
Click to collapse
It actually does. The L&K is about as thick as the Ringke Bevel. I had the "Pleson" version of it (theyre both the same just rebranded) and that is how thick it felt. The X-Level is .78mm thin.

Have a link for where you got it?
Sent from my iPhone using Tapatalk

zaydaboss said:
Have a link for where you got it?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.

Nocturnal86 said:
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Click to expand...
Click to collapse
Check your PayPal

zaydaboss said:
Check your PayPal
Click to expand...
Click to collapse
Check your PM's, need your address

Nocturnal86 said:
Check your PM's, need your address
Click to expand...
Click to collapse
Loving this case. Was concerned it would crack like the mnml ones it's tpu so that won't be a issue this will keep me from going commando I hate cases

You have a spare case to sell me?

rfuser said:
You have a spare case to sell me?
Click to expand...
Click to collapse
Just saw this, sent you a PM

What about sending one up north to Canada, eh?

evanwier said:
What about sending one up north to Canada, eh?
Click to expand...
Click to collapse
If you pay for shipping along with the case lol

eBay got the hook-up: https://www.ebay.com/itm/X-Level-Pu...-Slim-Armor-Clear-Soft-TPU-Cover/222698641914
It took 23 days to reach me in Los Angeles from China.
Just got mine yesterday and I love it. I've been on the hunt for a good clear case to show off the phone. I first had the Spigen Liquid Crystal but it added a bit too much bulk for my liking. This one is just thick enough to protect the rear camera lens when the device is resting face-up. My only complaints are that:
1. there is no lip to protect the screen if I want to set the phone face-down (seems to be common amongst slim cases), and
2. the cut-outs are a bit sharp from being unfinished (though really this is not a big deal for me).
The fingerprint reader cut-out is a bit off-center but at a glance it isn't noticeable for me.

Unfortunately after some time (2 weeks) case has weird bluish discoloration.
I'm assuming this came from holding my phone in pocket (jeans).
I have also Ringke clear case and same story, same discoloration.

been using this for more than half year, same as other tpu case, it will turn yellow as time goes by.