[Q] How do I change from Italian ROM to WWE ROM? - Touch Pro2, Tilt 2 Windows Mobile General

Hi.
I recently acquired a TouchPro2 (T7373), and it came with Windows Mobile 6.5 Pro in Italian. I want to install the WWE ROM and I wanted advice to be sure I don't wend up with a dead device!
I've read about HardSPL and a version for GSM and another for CDMA-GSM worldphone (Rhod400, Rhod500) and I really don't understand which mine belongs to.
It's not locked to any carrier and it says on the box HSPA/WCDMA as well as Quadband GSM/GPRS/EDGE.
Any directions please?
Thanks.

Probably you have gsm. You can check it on the back of your batterie. And if you can't find it, you can run harspl and if you are using the wrong version it will tell you. And then you need hardspl yes to flash a rom You can check it on the rom development section.

Many thanks. I'll see how it goes and let you know.

Related

Noob question - latest ROM (WWE)

Sorry for the noob question - feel free to flame away
I'm looking to upgrade my HK Diamond ROM. Is there any advantage in flashing the HK or Europe version of the ROM over each other?
Is the WWE Rom 1.37.707.1 the lastest WWE ROM available for the diamond?
http://forum.xda-developers.com/showthread.php?t=401425
Thanks!
Another noob question
Had a look here:
http://forum.xda-developers.com/showthread.php?t=400411
How do I know if I'm a DIAM1400 or DIAM300 user? Is there any requirement I need to flash my ROM? (ie other software eg Hard-SPL etc).
Thanks again
funkyr said:
Sorry for the noob question - feel free to flame away
I'm looking to upgrade my HK Diamond ROM. Is there any advantage in flashing the HK or Europe version of the ROM over each other?
Is the WWE Rom 1.37.707.1 the lastest WWE ROM available for the diamond?
http://forum.xda-developers.com/showthread.php?t=401425
Thanks!
Click to expand...
Click to collapse
as of today the latest stock HTC WWE ROM is to be found here:
http://forum.xda-developers.com/showthread.php?t=408281
guys thanks for all the help
i now have this working despite being sure that the proxy was unchecked in the t-mobile settings.. this was not the case amongst the numerous hard resets the settings must have auto-populated
removing this has solved the problems.
my sync issues are fixed and am connecting through to hotmail and gmail too
i think i can now call my first mobile flashing a success
the benefits over the 1.34 ROM are clear and this 1.37 ROM is how the phone should operate. I will wait for the guides before looking into flashing the radio which i think will deliver more benefits
once again thanks to all
glad to hear of your success.
funkyr said:
Another noob question
Had a look here:
http://forum.xda-developers.com/showthread.php?t=400411
How do I know if I'm a DIAM1400 or DIAM300 user? Is there any requirement I need to flash my ROM? (ie other software eg Hard-SPL etc).
Thanks again
Click to expand...
Click to collapse
As I know - Diamond140 - this 2G Diamond (only EDGE, no HSDPA).This Diamonds HTC sells in India. I don't know - only software (but I think yes) or soft and hardware difference
IF I'm not mistaken (correct me if I'm wrong):
Try installing HardSPL, flash with a regular 3G rom.
IF it's the same hardware, it should at least connect you via edge.
If not, you won't get any network coverage.
funkyr said:
Another noob question
Had a look here:
http://forum.xda-developers.com/showthread.php?t=400411
How do I know if I'm a DIAM1400 or DIAM300 user? Is there any requirement I need to flash my ROM? (ie other software eg Hard-SPL etc).
Thanks again
Click to expand...
Click to collapse
Do a hard reset and it should be written on the boot screen if it's a diam100, 140 or 300.

tutorial/description/info/guide

Hi everyone!
Here's the deal! I'm no noob to flashing, cooking and HardSPL as I'm positive there are plenty of users who are swimming in the same pool.
Moving from another device's forum (Trinity) to the Diamond forum is quite a shock. So many posts, so many threads.
There are so many HardSPLs. OK, no problem! But what I DO miss is a tutorial thread with nice and clear descriptions stating for instance "You will need this HardSPL for this ROM", ""You will need this HardSPL for Official ROM", "You don't need any HardSPL for Official ROM", etc.
For instance:
I'm running an old version of Radio and Official Diamond ROM (Stock), 1.00.25.03 Radio and 1.37.479.3 WWE ROM.
Bootloader version is:
Code:
DIAM100 64M
SPL-1.37.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I'd like to first upgrade to another Official ROM, like RUU_Diamond_hTC_Asia_HK_WWE_1.93.831.1.
No info on following:
- changing an original to another original ROM: is there need for HardSPL?
- changing a supposed EU original to an Asia original ROM: is there need for HardSPL?
- if there is need for it when upgradin ROM, which one to choose based on bootloader info?
- if there is need for it when upgradin Radio, which one to choose based on bootloader info?
etc.
I can live with my new device with stock ROM, I can tweak it, no problem.
But it is my strong belief that a detailed tutorial/description/info/guide thread could get a nice sticky.
Something that would make new users like:
"Oh, I just bought a Diamond, I read this sticky, compared my bootloader info with the ones stated in the thread, checked my ROM and Radio, checked my new ROM and Radio which I want to flash, so I need this/I don't need any HardSPL and it worked"
Yes, call it spoon-feeding, but while looking at the Forums and reading and searching, there's so much clutter some can't even find the Search button!
My two cents!
I totally agree !!! We are needing that "tutorial for dummies"
Im new to the Diamond forum too, had a tytn for ages though.
I found everything i needed to know on the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Here my tuto (french version, could use a translator like google to push it in english) : http://celogeek.free.fr/2008/08/htc-diamond-rom-cuisinee-diamond-project-32/
Try it Hope can help
geistteufel said:
Here my tuto (french version, could use a translator like google to push it in english) : http://celogeek.free.fr/2008/08/htc-diamond-rom-cuisinee-diamond-project-32/
Try it Hope can help
Click to expand...
Click to collapse
Yes, but still, is there any need for HardSPL when flashing to another Official HTC ROM? And is there any need for HardSPL when flashing to another issuer of the Official HTC ROM (from EU to Asia HK)?
tnyynt said:
Yes, but still, is there any need for HardSPL when flashing to another Official HTC ROM? And is there any need for HardSPL when flashing to another issuer of the Official HTC ROM (from EU to Asia HK)?
Click to expand...
Click to collapse
You don't need HardSPL to flash an official ROM. If you want to be really sure then simply go to the HTC site (I used HTC Europe), register as a user, input your phone's serial number and it should tell you that you can download the 1.93 ROM. This way you can do a 100% official upgrade before deciding if you want to use a cooked ROM.
http://www.htc.com/member/login.aspx
Hope this helps
andy2111 said:
You don't need HardSPL to flash an official ROM. If you want to be really sure then simply go to the HTC site (I used HTC Europe), register as a user, input your phone's serial number and it should tell you that you can download the 1.93 ROM. This way you can do a 100% official upgrade before deciding if you want to use a cooked ROM.
http://www.htc.com/member/login.aspx
Hope this helps
Click to expand...
Click to collapse
I know that, remember, I'm not a n00b.
First, I have no updates in my registered Diamond e-Club account.
Second, this is what I am talking about: You said:
You don't need HardSPL to flash an official ROM.
Click to expand...
Click to collapse
Other peoples opinion:
omaga said:
You need hardspl on every one, and all are offcial roms as they were downloaded
only the rom you can download from your own HTC e-club site dont need hardspl.
Click to expand...
Click to collapse
Contradictory information?
Now since I don't have any updates in my own e-Club, there's the HardSPL option with other (even Official) ROMs.
Question is: which one? (1.23, 1.24, 1.34, Developer edition, Hard-SPL-Diamond-OliNex, HardSPL_OliNex138_Signed or RUU_Signed_1_93OliNex_HSPL_UnsignedEdition).
This is crazy!
Maybe that's the difference then - perhaps ROM downloads via the e-club are treated differently, although I can't think how.
Seems that Cmonex and Olipro are the SPL experts here (I'm sure you've already seen this http://forum.xda-developers.com/showthread.php?t=400402) so maybe they're the best ones to help.
If it helps I updated to HardSLP 1.4 and ran quite happily on my stock ROM before upgrading to Dutty's ROM. I guess it's down to how adventurous/risky you want to be.
Good luck.
1. look at the next posts, i blew it on this answer..
i like my diamond with hardspl and unlocked (using the developers, unsigned hardspl). i advice you to do the same. this covers all, signed, unsigned and official ROMs.
here, an answer from THE expert:
http://forum.xda-developers.com/showpost.php?p=2484533&postcount=143
2. if i convinced you to hardspl then go to the unsigned version:
http://forum.xda-developers.com/showthread.php?t=400950.
i am using it from the beginning (2 month at least) and i flashed my diamond 4 times without any problem at all.
3.
There are so many HardSPLs. OK, no problem! But what I DO miss is a tutorial thread with nice and clear descriptions stating for instance "You will need this HardSPL for this ROM", ""You will need this HardSPL for Official ROM", "You don't need any HardSPL for Official ROM", etc.
Click to expand...
Click to collapse
already there, in almost each ROM thread.
i think all cooks start their thread with the warning (hardspl first!) and a link to the recommended hardspl.
bepe is "all signed" so he never mention which hardspl.
others, for example:
dutty's choice of hardspl: http://forum.xda-developers.com/showthread.php?t=408621
[WM 6.1] NEW SWIFTBL WWE DIAMOND ROM V5.0 - CE OS 5.2.20273 (BUILD 20273 AKU 1.3.3)
http://forum.xda-developers.com/showpost.php?p=2312249&postcount=2 or http://forum.xda-developers.com/showpost.php?p=2412201&postcount=1first
DIAMOND PROJECT ROM Release V3.2 [WWE/GER/ITA/FRE/RUS/ESN]
http://forum.xda-developers.com/showthread.php?t=408621
i wonder what happened to you.... learn from post #3!! you are a ROM cook...you are the "uber" user! we should ask you questions
I know you say if you flash an official (uncooked) ROM to your handset then you don't need SPL however I have a Vodafone branded Diamond which won't allow you to flash a non Vodafone branded ROM so I am ssuming that you still need to use SPL to go to an unbranded ROM even if it is generic HTC.
vrstu said:
I know you say if you flash an official (uncooked) ROM to your handset then you don't need SPL however I have a Vodafone branded Diamond which won't allow you to flash a non Vodafone branded ROM so I am ssuming that you still need to use SPL to go to an unbranded ROM even if it is generic HTC.
Click to expand...
Click to collapse
i think you are right. never thought at this scenario.....
usually i don't buy my pda branded. no plan, no 3 years, free as a bird!
thanks for bringing it to my attention.
yeah, hard-spl to allow you to flash ROMs from other regions..
technically you shouldn't need it to 'protect' your device since its an official ROM upgrade, but then again you're trying to flash an upgrade that's not from your region so not too sure how that affects your warranty.. i would stick with hard-spl no matter what.
Although you may experience better results with certain ROMs using a certain SPL (this hasn't been clearly shown on the diamond to my knowledge) seems like the SPL is more tied to your hardware (why certain people get screen flicker and fuzzy fonts after flashing.. wrong SPL). so it stands to reason if your hardware doesn't change, you *shouldn't* have to change your SPL just cause you're flashing a new ROM
KukurikU said:
1. you don't need hardspl when you want to flash an official ROM.
if you should need one then HTC should release it with the ROM. no such thing!
HTC release official ROM "like it is" for all ppl even for the ones that never heard of hardspl. simple logic.
if you buy it branded look at the next two posts!
i like my diamond with hardspl and unlocked (using the developers, unsigned hardspl). i advice you to do the same. this covers all, signed, unsigned and official ROMs.
Click to expand...
Click to collapse
I have experince now with 3 HTC devices: 1. i had Trinity with wwe rom when i bought it-> try to put it to my language (Finnish ROM) didnt work, used hardspl-> it worked
2. Polaris with wwe 6.0 rom, tried to update to the latest wm6.0 rom which was a rom from Singapore, no succes-> put hardspl in device->it worked
3. In my Diamond i put hardspl right away(after 2 hour use), so that one i didnt test at all, based on my previous experience I didnt even try to flash the official 1.93 rom witout hardspl
So at least my concution is that u must have hardspl even when you want to flash a official rom from another region. Dont offcourse no if that is a fact, just what i have experience
[/QUOTE]So at least my concution is that u must have hardspl even when you want to flash a official rom from another region. Dont offcourse no if that is a fact, just what i have experience[/QUOTE]
From my experience from the diamond, you have to flash hardspl onto your handset before you can use 'other region' roms even when it is 'official'.
I have a HK WWE handset and tried to flash my rom with the first upgrade rom from SEA, and it wouldnt flash. it would say my handset is not from the correct region.
i flashed a hard spl afterwards and it worked.
So from pak1234 experience we can make some conclusion? its the same experience I got with Polaris and Trinity
Noob Agony
Hi,
As a total recent Noob (TRN), I spent about 2 working days trying to find out where to start. In particular, the definition of HardSPL, ROM and Radio.
It was very difficult to ramp up to speed. you guys rock, seriously, but your community can thrive if you lower the gate a bit. Think about all the time you'll save in the long run by giving noobs somewhere to start. 'There are no stupid questions, only arrogant responses'. -- I read that somewhere here.
For anyone who enjoys noob-razing, come visit me and I'll stick you in with my horses. Get some payback.
A Where-To-Start sticky would help enormously.
peace.
PS - Eventually I found www.modmydiamond.info and started reading. I nearly cried when my Swiss language-locked Diamond started talking in good auld English.
bluntyeyedfool said:
Hi,
As a total recent Noob (TRN), I spent about 2 working days trying to find out where to start. In particular, the definition of HardSPL, ROM and Radio.
It was very difficult to ramp up to speed. you guys rock, seriously, but your community can thrive if you lower the gate a bit. Think about all the time you'll save in the long run by giving noobs somewhere to start. 'There are no stupid questions, only arrogant responses'. -- I read that somewhere here.
For anyone who enjoys noob-razing, come visit me and I'll stick you in with my horses. Get some payback.
A Where-To-Start sticky would help enormously.
peace.
PS - Eventually I found www.modmydiamond.info and started reading. I nearly cried when my Swiss language-locked Diamond started talking in good auld English.
Click to expand...
Click to collapse
congrats on yr first successfull step (english language on yr swiss locked diamond)! perseverance and good reading skills pay back.
welcome to our forum!
from yr post i can understand that you started as an intelligent user/member of this forum (as opposed to noob) by using this forum accordingly with it's rules.
there are stupid questions. if one of the next is called by somebody "arrogant response" then he'll have to adjust or just grow elephant skin (i can name a few that already did):
1. "search, this was already posted". (most used)
2. "read the manual." (almost an insult)
3. "read wiki." (friendly, useful advice)
4. "most of the polls are useless." (no comment necessary)
5. "comparisons between any other ppc and diamond does not belong here, this a diamond only forum." (sadly not enough enforced)
a noob is not somebody with a low count of posts. a noob is somebody with a noobish attitude (total disregard of the forum's rules and it's members, wanting everything now, ready, chewed and put in his mouth).
respect the forum and it's members and you'll get respect and help beyond yr wildest dreams.
yr PS only confirm all from the above.
i prefer not to comment yr horses-payback threat
noob here
Hello all, noob here, just got my diamond via vodafone NL.
The device is sim locked contrary to what the agreement with was.
The current rom running on it makes this device incredibly slow, my brother has an p3300 which works way faster than my diamond (but does not look so nice).
This made me start looking for a solution. I've been reading this site for three full days and I'm still very confused, everything and it's contrary is written here, how is one supposed to draw a conclusion?
With that said I would like to see a well written tutorial in plain english and that does not assume the reader is a techie.
It should explain:
- How to backup the original ROM and hardSPL
- How to flash a new rom and avoid issues with screen flickering and so on
- How to restore the original ROM and hardSPL in case the device needs to be send back for repair
- Clarify what to do with radio roms
- How to unlock a device to be used with any sim card (ok this already exists, i've seen the sticky)
Thanks
One more question to be added
- Why would you need a CID and security unlocker?
I thought it was just another name for sim card lock but apparently not.
tnyynt said:
I have no updates in my registered Diamond e-Club account
Click to expand...
Click to collapse
You should go to Support section of their site, that is where they post ROM updates apparently. e-Club has only ringtones.

help!!always hang after flash to manila2d!!

hi there, i hv a problem here,i hv flash my dopod838 pro to manila 2d which i found in this forum,after flash it,my device also hang and when i do a soft reset,it hang at boot screen and cant enter windows..i wondering what problem with my device.....can some body gv me idea regarding my dopod?relly blur and no idea about it...........
Hi! Have you tried flashing original carrier ROM & then flashing the ROM of your choice??
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
I hope you had Hard SPL installed.
Do a search to see if you can find your carriers WM06 rom, it doesn't need to be WM05. Search is your friend here.
kahwah said:
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
Click to expand...
Click to collapse
HI!
Please check this link out I am sure it you will get enough info about upgrading your Dopod 838 pro!
Best of Luck!
ultramag69 said:
I hope you had Hard SPL installed.
Do a search to see if you can find your carriers WM06 rom, it doesn't need to be WM05. Search is your friend here.
Click to expand...
Click to collapse
yes i have hardspl installed,my spl ver is 2.10.olipro,but still like that
kahwah said:
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
Click to expand...
Click to collapse
Hi!
You can get original carrier shipped WM6 rom for your mobile here!
thanks hemendra05!!1 more thing i want to ask,what is radio rom?what is the diffrence flashing radio rom and other ordinary rom?thanks
kahwah said:
thanks hemendra05!!1 more thing i want to ask,what is radio rom?what is the diffrence flashing radio rom and other ordinary rom?thanks
Click to expand...
Click to collapse
Hi!
The radio ROM provides improvements on the GSM radio stack and this has effect on the GSM signal, AT command interface, GSM data modem (3G, GPRS, EDGE, HSDPA, etc...) functionality that is controlled by the Radio Interface Layer (RIL)
Please go trough this page you have plenty of information related to all Hermes related queries one may have.. Hope it will be useful for you
Just remember though that if something stuffs up while flashing the radio rom, you are pretty much gonna end up with a brick... You may be able to use the PDA functions but phone will be gone forever...
same problem
I have a dopod 838 pro. Hardspl by olipro. Flashed roms with manilla 2d and right now suffering the same problem like kahwah..
Tried already the method of flashing original rom then to the cooked rom but still the same problem persist.
Can someone give me an idea on what to do next..
Seriously guys, both of you, READ the Hermes Wiki and the Noob section, they are set as stickies at the top of the thread. I mean, come on, you have not even posted 7 posts on XDA-DEVs and you already are close to bricking your phone.
READ the Wiki first!

does anyone have a dump of the rogers french rom?

Hi all,
I am new here and I have been snooping around. This is a great forum.
anyway, So on tuesday I recieved my rogers HTC touch diamond with a 3 year term extension. The phone came in WIMO 6.1 FRENCH. I was a bit pissed because I'm pretty sure that I specifically asked for the english version. After reading another forum post, it seems another user ran into this issue with rogers. they don't seem to carry the phone in english.
I wanted to return the phone but then i stumbled upon xda developers and hard spl'ed the phone and loaded new roms on it. the thing runs pristine now. I am in love with this phone. I do want to keep it but I dont want my 3 year lock-in with my carrier.
So, I was wondering if anyone has a dump of the french version rogers rom for the diamond? this way i can revert it back to manufacturing defaults and return it within my 30 day trial window and then just buy one BNIB off ebay or someone off howard forums.
can anyone help me out here?
I also got a French ROM on my Rogers Diamond. They do have english versions as well though. If you do a search you will find a link to the english Rogers ROM.
My guess is that they would not check if the ROM was supposed to be french or english. They would just check that it is a stock ROM and spl.
Check this thread for the English version:
http://forum.xda-developers.com/showthread.php?t=455347
To restore back to orignal state,
1) Flash the OS ROM
2) Flash the original radio
3) Flash the original splash screen
4) Finally, use the Soft-SPL method to change the HardSPL to the original Rogers SPL
5) Return it
pinball said:
I also got a French ROM on my Rogers Diamond. They do have english versions as well though. If you do a search you will find a link to the english Rogers ROM.
My guess is that they would not check if the ROM was supposed to be french or english. They would just check that it is a stock ROM and spl.
Click to expand...
Click to collapse
thanks for the reply. I hope you are right about them not checking.
the contents of the box have french documents. I hope that they dont clue in
well I guess I'll give that a go. I hope they they dont charge me the $200 policy for used or damaged returns. but if they do its worth not having to lock-in for 3 years.

is it possible to update with Windows 6.5 Rom on Indian 2g Diamond

hi,
Need help on updating my HTC Touch Diamond.
is it possible to update with Windows 6.5 Rom on Indian 2g Diamond.
Is there any specific process for this.
Please help me out
@ bobbyswebzone
Yes, you can do it on 2g Indian Diamond.
Follow this link : http://forum.xda-developers.com/showthread.php?t=416211
Its needs a little reading and please make sure you do read or else you might end up with an expensive brick!
Also Ensure your phone is GSM and not CDMA.
thanks for your quick response will check the forum
bobbyswebzone said:
hi,
Need help on updating my HTC Touch Diamond.
is it possible to update with Windows 6.5 Rom on Indian 2g Diamond.
Is there any specific process for this.
Please help me out
Click to expand...
Click to collapse
Absolutely no problem. Pickup any ROM( of course for Diamond) of your choice and flash.
I am using it and no problem......
Hi, you can even look at my tutorial for Indian Diamond. I had lot of difficuly in searching specific info on flashing INDIAN diamond, hence wrote this tutorial.. Hope it helps..
Link:
http://forum.xda-developers.com/showthread.php?t=429324
@karkalanand
Thanks for creating a beautiful thread that would help the Diamond 2G users. I would say that should be the bible for all the 2G users.
I have a question. When i did Hard SPL i used this one "Hard-SPL 1.40 Olinex SIGNED" however i noticed in your thread and in your signature that you have mentioned to use "Hard-SPL 1.40 Olinex Developer Edition-unsigned ". Can i please ask what is the difference and can i go back to what is mentioned in your thread even though i have already done "Hard-SPL 1.40 Olinex SIGNED"?
Also i had tried installing a radio version from the diamond thread of 1.13 but it gave an error that its a wrong device....could it because of the signed Hard SPL?

Categories

Resources