[Q] I Need Help Plz - myTouch 3G Slide Q&A, Help & Troubleshooting

I have been at this for about 4-5 hours trying to root doing every little damn thing everybody has suggested i get all the way to where it is suppesed to say recovery but i have no luck at all im to the point of breaking will someone plz hlp me if u are in the pittsburgh area maybe we could meet up and get a successfull result im so flustered ive rooted the droid the g1 and the my touchs and never had this much trouble trying to root my damn phone

Just keep trying, man. It sometimes takes awhile to get your phone to actually show as "offline" in the adb loop. Just think, after you're done, you can flash the eng release and not have to worry about using the loop every time.

Have you changed the flash in the phone? I replaced my factory 8GB Class 2 flash chip with a new 8GB Class 6 flash chip and I had the same problem. I put the original factory flash back in and the phone went into recovery no problem. Apparently recovery is flaky with some flash chips.
Also, this is the Dev forum, not the Q&A forum. You'll want to post other questions in the appropriate area.

Same thing here once I changed out the factory sdcard with my 2 gig from my g1 it worked on the first try.
Sent from my myTouch 3G Slide using XDA App

Almost always user error. Read the instructions again. By the way, WRONG SECTION! FFS you're question has a 'Q' in front, that goes to 'Q' and A.
Sent from my T-Mobile myTouch 3G Slide using XDA App

Related

Help, i think ive bricked my HTC Hero :((((((

Hi Guys,
I really need your help.
I went and got myself the new HTC Hero (G2) on t-mobile about 2 weeks ago - since i have got it i have been doing loads of research and stuff in to the device and started to have a play around with it last night.... the first thing i did was install VillainROM 5.2: RELEASE CANDIDATE - for GSM HERO (NOW WITH KITCHEN!) Image just incase summin bad happens (ironic really) and then took a nandroid backup .
I then went ahead and installed the MoDaCo ROM..... I then thought i'd try another ROM just to see how easy it is (or isn't) to load them..... but something has gone wrong somewhere.... after i loaded VillainROM custom ROM i cannot get passed the G2 Touch boot screen..... nothing seems to work.
I have wiped the device several times and formatted the sdcard several times and tried to restore from the nandroid backup but nothing has worked.
Any ideas guys?
Cheers,
Dev
Please Donate if you can every £ or $ is very worth for me
Paypal:
[email protected]
Please help me buy htc hero :/
hi can run the process of what your doing?
Sent from my Hero using Tapatalk
hi
[email protected]
get me on gtalk
Sent from my Hero using Tapatalk
Are you able to get a logcat?
hi homersp
Sent from my Hero using Tapatalk
No i can't do it nothing at all it was my first ROM ;/ and after this phone stop working at all Dont EVEN SWITCH ON WHY ??
can log onto gtalk this could move faster
Sent from my Hero using Tapatalk
Hi coffeecharity
Ive invited you, and you need to respond ;/
Anything what i can do with this phone is don't wont to switch on ;/
hi
sorry no pending invite send an email [email protected]
Sent from my Hero using Tapatalk
devil666uk said:
Hi coffeecharity
Ive invited you, and you need to respond ;/
Anything what i can do with this phone is don't wont to switch on ;/
Click to expand...
Click to collapse
It won't even switch on when plugged in?
Yeah... that sounds bricked.
ive send you an email
If you've JUST switched ROMs, there's nothing you could've done to brick your handset, UNLESS you've flashed a CDMA radio instead of a GSM radio in order to flash the 2.1 roms.
Otherwise, try to get into recovery mode while holding the HOME button and pressing POWER ON. Don't let go until you get into recovery mode.
Like I mentioned; unless you've flashed a CDMA radio, you should be able to enter recovery.
devil666uk said:
Please help me buy htc hero :/
Click to expand...
Click to collapse
That's not the way it works.
"I've tried tuning my car, but I've broken it; help me buy a new car"
lol man, do people really fall for that?
Ive plug in Phone now and nothing phone not responding ;/ ((( what i need to do it's any chances to fix this :??
I flashed a CDMA radio ;/ and after this i put file with rom into my memory and i flash flash was stop somewhere in the middle and phone was switched off, and now dont wont to switch on
Why would you flash a CDMA radio on a GSM Hero?
don't know i think its nessesery ;/
Its like i sed it was my frist time so i do it... and i lose g2 ;/
Well then you are bricked.
There are ways to recovery from this but they are not widely documented and are not easy to do.
Never ever ever flash anything CDMA on a non CDMA device and visa versa.
Fuc...... he..... Thanks any way ;/

Stuck At HTC White Screen :/ Bricked?

So I think i have officially bricked my Evo. Apologies if this is the wrong sections. Didnt know where to put it.
Well I had rooted with Simpleroot and everything was just fine. But when i tried to install a copy of the Fresh root suddenly i was stuck at the white screen. So i went into recovery and and wiped everything. I also partitioned the sd card... Dont know if i should have done that but i figured it would wipe everything.. It did and now my zip files are gone. I Dont know what to do.. Yikes
Help much appreciated .
Lol because lol
Sent from my PC36100 using XDA App
Probably shoulda gone into Q&A....but u erased all.the data on ur card when u formatted it. You should probably follow the root instructions again from the start including copying the files to your sd card and u should be fine.
You could have done a simple search and fixed ur issue.
Sent from my Evo using the XDA App
Sorry I thought this my be the wrong forum section. I cant access my Sd card though?
Your Evo isn't bricked.
Select the USB-MASS toggle feature in recovery mode, that'll mount your SD card to your computer, then drop a ROM or two onto the root of your SD card, wipe, then flash one.
Or pull the SD card out and put it in an adapter and plug into computer, then drop a couple roms on it
Sent from my PC36100 using XDA App
This is your second posting of this type. Please read these before doing anything else http://forum.xda-developers.com/showthread.php?t=695878 and http://forum.xda-developers.com/showthread.php?t=709267.
alisha898 said:
So I think i have officially bricked my Evo. Apologies if this is the wrong sections. Didnt know where to put it.
Well I had rooted with Simpleroot and everything was just fine. But when i tried to install a copy of the Fresh root suddenly i was stuck at the white screen. So i went into recovery and and wiped everything. I also partitioned the sd card... Dont know if i should have done that but i figured it would wipe everything.. It did and now my zip files are gone. I Dont know what to do.. Yikes
Help much appreciated .
Click to expand...
Click to collapse
Youre definitely not bricked. Pull the battery out, boot into fast boot, wait a sec while it does its thing, then select wipe/restore factory defaults. Then it should be fine. This happened to me 2 days ago. When bricked, the phone won't even turn on. It does nothing, thus the term.
nunyabiziz said:
This is your second posting of this type. Please read these before doing anything else http://forum.xda-developers.com/showthread.php?t=695878 and http://forum.xda-developers.com/showthread.php?t=709267.
Click to expand...
Click to collapse
That's a pretty douchie comment. Just because notify likes you, and everyone treats you like **** in the real world, doesn't give you an excuse to be a " richard" in a forum.
adelaney said:
That's a pretty douchie comment. Just because notify likes you, and everyone treats you like **** in the real world, doesn't give you an excuse to be a " richard" in a forum.
Click to expand...
Click to collapse
Im sorry you feel that way maybe you need to hug from someone but not me. There was nothing rude or wrong with my posting. There are basic knowledge required to do what the OP wants to do and so I directed toward that direction. If you would like to continue to express your PERSONAL feelings please PM me.
Yeah Anyways. The problem now is that everytime i try and boot from a zip file i just get a white screen. Is there anyway to bypass this?
alisha898 said:
Yeah Anyways. The problem now is that everytime i try and boot from a zip file i just get a white screen. Is there anyway to bypass this?
Click to expand...
Click to collapse
Which ROM's are giving you theses problems?
Ive tried the fresh 1.0.1 thats when it all started then i tried the EVO-NonSense.
I had been flashing roms before the Fresh one now im just stuck at the white screen.
Are you using Koush's Clockwork recovery? Try flashing Yay 4 Juggs ROM.
Im using the RA recovery that came with SimpleRoot
Yeah, just try flashing a different ROM.
Hmm i'll try. Is there anyway to earse my root and start over? Because for now im just get the htc Evo 4g white logo everytime i try and flash a new ROM
Did you update the radios and all that too? Did you make sure and use the right version of simple root for your software?
Yeah Yesterday I was flashing ROMS normally. Something may have happened when i tried to flash a radio and wimax
alisha898 said:
Hmm i'll try. Is there anyway to earse my root and start over? Because for now im just get the htc Evo 4g white logo everytime i try and flash a new ROM
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=KBu6GsRZMdI Some random video I looked up on YouTube that shows you how to unroot. It's a hassle, to unroot, then root again, I'd give flashing a different another shot before I did that.
Stupid question: Are you wiping data and dalvik cache before flashing a ROM?

Am I in brick city?

So i tried to update my AOKP with just using my phone. And after the reboot.. nothing happened. So i did a battery pull and now when I turn on my baby the led goes blue and stays there.. frozen. No access to recovery or download.
Black screen and blue led.. so yeah.
What I'm asking is.. there's no way of coming back?
Sent from my Old Evo using xda premium
Also.. I semi-bricked before and was able to fix via download mode.. so I know my way around.
Sent from my PC36100 using xda premium
When you updated AOKP you flashed the EL26 CWM kernel as per the instructions in all AOSP roms up until now? Both the recovery in AOKP 37 and the Zip for AOKP 39 (as far as I am aware) are not safe to flash in ICS Recovery.
BLoD is a sign that the bootloader is borked. Normally this is something fixable via JTAG. But it is also caused at Random by the Super Brick bug which can not be fixed. Sounds like you flashed not only an unsafe Zip but in an unsafe recovery and if you tell me you factory reset that would be even worse.
Our phone has a bug in its eMMC firmware which needs to be patched. All of the former ICS leaks have had kernels that can trigger it and last i checked only the Nighlies for CM9 have a safe updater binary used in conjunction with a made safe recovery are generally safe to flash from ICS. Which is exactly why the threads tell you to use the EL26 CWM kernel which if mobile can be flashed via mobile odin. Failure to do so will eventually at random trigger the bug.
Blue LED and not able to get phone into Odin mode = Hard Brick
another one bites the dust......i just don't know how the directions could be any more clear on flashing ICS ROM's. Maybe we need a sticky in every forum in bold letters that says:
"READ ME BEFORE FLASHING!"
I read the warnings and all that jazz. It was just a bad download thanks to the 4G. Mistakes happen. Relax @ above poster.
Yeah I went about it the right way. I have insurance with Sprint, hopefully I'll get lucky and get a new phone.
Thanks to the rest that answered.
Sent from my PC36100 using xda premium
I agree with Rican Bomba... Not everyone is a Android hacking Guru. We are all trying to learn here. I bricked my phone and i did follow QBking77's instructions (Who i believe to be the best at explaining things thoroughly in his videos) yet, there are so many post that aren't clear. I had force closes like crazy on AOKP and before i found the one poster that said don't wipe in ICS... I had done it and lights out R.I.P. First E4GT. I have flashed way too many times to count without incident. Some posters put more info on how not to brick than others. I followed QBking's method to a tee and something was still wrong... I don't blame him (He makes things crystal clear and is great at what he does), things happened and that was that. I learned something from a poster who was very clear and i won't make the mistake again (not to mention I'm leaving AOKP alone lol). Take it easy on these guys, they will learn soon with a little friendly direction
Rican Bx Bomba said:
I read the warnings and all that jazz. It was just a bad download thanks to the 4G. Mistakes happen. Relax @ above poster.
Yeah I went about it the right way. I have insurance with Sprint, hopefully I'll get lucky and get a new phone.
Thanks to the rest that answered.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Never never never never download a ROM through Mobile Network... and if you do, make sure you check the md5. I think almost all of my 4G ROM downloads have been corrupt
iniz94 said:
Never never never never download a ROM through Mobile Network... and if you do, make sure you check the md5. I think almost all of my 4G ROM downloads have been corrupt
Click to expand...
Click to collapse
Flashaholic lol no computer access at my job and at home at the moment.
Sent from my PC36100 using xda premium

Help! phone won't turn on (t959d koodo)

Hi,
I just got the phone and flashed a custom recovery. I flashed a new rom (liquidsmooth) and it looked like it was successful. I selected reboot and the screen shut off. Now, It won't turn on. It's possible that the battery died but shouldn't it turn on again once I plug in the usb cable? Is it possible to brick the device from cwm?
thanks
Dear lord I hope that's a typo because this is the t989(d) forums. If it is a typo and you're using a t989 then you probably need to wipe cache/dalvik.
Sent from my SAMSUNG-SGH-T989
As Mr. Mintharis said... I'm hoping as well that you had a typo and you didnt flash a T989 (GALAXY S2 TMobile) rom on a (GALAXY S) device. If so your probably hard bricked. If that was a typo and you did flash a rom and it wont turn on then there may be a few problems that are solvable. I got a few questions.
1. DId you do a factory reset before installing? Did you wipe system?
2. Can you get into CWM?
3. Can you get into Download Mode?
If you cant get into download mode, recovery, or get the phone to boot then you are in serious trouble because the phone is a a fancy paper weight. If you can however, you could try doing a full reset on all the settings and deleting cache/dalvik and then reflashing and trying again. However you may be in luck since you said you just got the phone. I'm assuming you got it from your carrier (I'm guessing its T-Mobile, idk any other carriers for this device) and they will replace a broken device (that does not have extensive physical damage or water damage) within 20 days of purchase date. Since your phone is hard bricked they will do it completely for free with no charge (usually... if they do.. it will be about 5$) and then you're good. They will overnight a phone to you and you just send your old one back when you get it (MAKE SURE TO ASK FOR DIRECTIONS ON HOW TO PROPERLY SEND IT BACK!).
Sorry for the long post but wanted to be through and give you alot of answers in 1 time so we dont drag this post out.
That's my mistake, it was supposed to read t989d.
1) I did do a factory resets
2) & 3) I can't turn on the phone or get into download mode
I bought it from koodo (carrier in Canada) yesterday. I'm going to try to exchange it today; hopefully they'll do it. For future references, is there a specific way I should be flashing? I used to have a t959, the t-mobile vibrant, and never had any issues with cwm because it never touched download mode. Anyways, thanks for the replies.
Edit: I did flash using odin which hung a couple of times. Regardless, i eventually got it back to original condition by flashing the custom recovery (by odin with green pass) and doing a nandroid backup. The bad odin flashes should have been negated when I did nandroid backup, no?
You said you had the problems after you flashed liquidsmooth? Exactly which file did you download and flash from the site?
Sent from my SGH-T989 using xda premium
Ok, just figured it out. I flashed wrong version of liquid smooth. The link in their thread goes to their facebook page and I clicked on the first link like an idiot. I got it exchanged a few minutes ago so all's well that ends well. Thanks all for the replies.
Lesson of the day: Don't be stupid.
mani_is_ms said:
Ok, just figured it out. I flashed wrong version of liquid smooth. The link in their thread goes to their facebook page and I clicked on the first link like an idiot. I got it exchanged a few minutes ago so all's well that ends well. Thanks all for the replies.
Lesson of the day: Don't be stupid.
Click to expand...
Click to collapse
Read read read.. If you are not 100% sure what you are doing just ask someone.. Sometimes you will get flamed for it but it's better than getting a bricked phone lol and you'll most likely get an answer..
I'm glad you got it replaced
Sent from my SGH-T989 using xda premium

Can't flash back to stock!!!

So here's my problem, I got the note 2 a few days ago, and as with all my other android phones the first thing I did was root it and start flashing roms. Well the first thing i tried to flash was the note2core kernel, which completely disabled any sort of connection i had to the sprint network.
After doing a restore in TWP, i'm still having the same problems. its now at the point where i have network connection (texts/calls) but have no internet (4g/3g). When i try hands free activation, the 4g symbol pops up and it looks like its connecting, but when i try to use data in anything else, it just says no connection and the 4g symbol is no longer there.
So after all this, i decided screw it i'm just gonna go back to stock, i'd rather have a stock working phone than a half functioning one. Using the note 2 toolkit, i downloaded and extracted the stock rom, but it keeps getting stuck on sboot.bin and failing, leaving me now with a phone that doesn't do anything but tell me to connect to kies and do an emergency restore, which i've tried to even less success. all other roms just get stuck in bootloop, and the only thing i can do now is flash recovery that came with the toolkit through odin which will let the phone boot up fine but i'm back to square one, no internet. Someone please help me, i've researched this through the forums for hours and hours now, it seems some ppl have the same problem but no answer. if i can just get back to factory form i'd be happy. Thanks to anyone that can help me with this miserable problem.
**update** things have gotten worse, my twp backup no longer exists and i'm stuck in an endless bootloop
Damn budy just days ago? and already messed this great device up. Dont worry I'm sure is just a hiccup but nothing I can help with. Kernel you mention tho ive never heard
Sent from my SPH-L900 using Tapatalk 2
Did you try this?
trying it now, i'll post the results. thanks for the quick responses though
klbjr said:
Did you try this?
Click to expand...
Click to collapse
Worked like a charm!!!!!! thank you so very much
The sboot.bin will fail its a safety thing samsung put in to stop from going back to older boot loaders ... There is a workaround for it...please read more before flashing kernels that are not for this phone .... that was the first and worst thing you did ... note2core is not a sprint kernel ...
Sent from my SPH-L900 using Xparent BlueTapatalk 2
sbin fail
I im having the same issue except im just try to update date to 4.1.2 on my sprint note 2. my only noob question is should i flash this with odin? i have the sph 900 stock restores tool but as i said it fails when it gets to sbin.

Categories

Resources