I think this might have been asked randomly in the forum, but does anyone have the CSC & the Modem files for the DXJF4 firmware?
I can find the PDA for the DXJF4 on the internet, but just simply can't find the modem and CSC files.
Any help will be appreciated.
hydkrash said:
I think this might have been asked randomly in the forum, but does anyone have the CSC & the Modem files for the DXJF4 firmware?
I can find the PDA for the DXJF4 on the internet, but just simply can't find the modem and CSC files.
Any help will be appreciated.
Click to expand...
Click to collapse
Look here: http://samsung-firmware.webs.com/samsungi9000.htm?referer=AffiliateNetwork
hydkrash said:
I think this might have been asked randomly in the forum, but does anyone have the CSC & the Modem files for the DXJF4 firmware?
I can find the PDA for the DXJF4 on the internet, but just simply can't find the modem and CSC files.
Any help will be appreciated.
Click to expand...
Click to collapse
CSC and Modem are already included in the PDA file.
artronnie said:
CSC and Modem are already included in the PDA file.
Click to expand...
Click to collapse
So I can actually use the same PDA file as the modem and csc file as well?
Or do I have to extract the files in it out and re tar the archive?
hydkrash said:
So I can actually use the same PDA file as the modem and csc file as well?
Or do I have to extract the files in it out and re tar the archive?
Click to expand...
Click to collapse
read the flashing tutorial (PDF) published in samsung-firmwares carefully, Point #2, it stated that if PDA is the only file you have, you can flash it with that 1 single file, no further extraction is needed.
"Open in ODIN the flash files and the .PIT file (use PDA if you’ve got only one file inside the firmware)."
hydkrash said:
So I can actually use the same PDA file as the modem and csc file as well?
Or do I have to extract the files in it out and re tar the archive?
Click to expand...
Click to collapse
If I got your question correctly, then no. Don't extract the tar archive. Put the DXJF4 PDA file (AP_S1_PDA_DXJF4_CL363024.tar) on PDA, leave the phone and CSC section blank (don't put AP_S1_PDA_DXJF4_CL363024.tar on the phone and CSC section).
Also, I succeed in flashing DXJF4 using 513 pit. 512 didn't work at all.
artronnie said:
If I got your question correctly, then no. Don't extract the tar archive. Put the DXJF4 PDA file (AP_S1_PDA_DXJF4_CL363024.tar) on PDA, leave the phone and CSC section blank (don't put AP_S1_PDA_DXJF4_CL363024.tar on the phone and CSC section).
Also, I succeed in flashing DXJF4 using 513 pit. 512 didn't work at all.
Click to expand...
Click to collapse
Hey thanks artronnie, just what I was looking for. Just tested that and its all fine now.
Related
Hi, I am new to Android and rooting and I am attempting to root my Galaxy S3 and I have been following mr.Robinsons guide. However I can't manage to get the .tar file I need. I download the AT&T RAR, extract it and see 10 or so files with Recovery images,boot image, mbn files..etc.
Why is this happening?
Anyone aware of what to do?
GilaMonster1 said:
Anyone aware of what to do?
Click to expand...
Click to collapse
Just google UNRAR.
GilaMonster1 said:
Hi, I am new to Android and rooting and I am attempting to root my Galaxy S3 and I have been following mr.Robinsons guide. However I can't manage to get the .tar file I need. I download the AT&T RAR, extract it and see 10 or so files with Recovery images,boot image, mbn files..etc.
Why is this happening?
Click to expand...
Click to collapse
I reread his guide, just to be sure I got my instructions correct. You should have downloaded a .7z file. Extract that and now you have a .tar file. Do not extract it. Open up Odin, click on pda, and point it to the tar file.
Can someone help extract a modem file from a Stock firmware downloaded from Sammobile ? or put for download the I9195UBUCNH3 modem file (zip or odin) is the last one for my country by mistake a replace it from another country and now my battery is going really fast.
i try some tutorial with cygwin, but no lucky.
thanks
Use the attached zip. U need windows pc for this. Place your firmware tar.md5 file in the extracted directory and open the "" tar.md5_packager.bat "" file. Then choose option to extract that tar.md5 file. In the 'parts' folder u will get extracted firmware contents. The non-hlos.bin file is modem. Good luck.
pedromms86: Hi guy, could you extract the modem file?
Please post it because I need it.
company of the problem
Sent from my GT-I9190 using XDA Free mobile app
Open the .tar.md5 official rom file with WinRAR and extract NON-HLOS.bin. Flash that file with Odin 3.07 as modem.
j0ep0 said:
Open the .tar.md5 official rom file with WinRAR and extract NON-HLOS.bin. Flash that file with Odin 3.07 as modem.
Click to expand...
Click to collapse
How can this be done with Heimdall? If so, do I use:
Code:
heimdall flash --APNHLOS NON-HLOS.bin
or
Code:
heimdall flash --MDM NON-HLOS.bin
Hello all, I need some help finding the .tar or the .md5 file from the stock ROM zip file (Tab Pro 8.4).
I am trying to flash / revert back to stock ROM and recovery, since I am giving this tablet to my nephew. I've downloaded the official firmware directly from Samsung, I've downloaded Odin V3.07 and the samsung drivers are installed on my laptop. I've used Odin before, to flash files (months ago), but where I'm getting stuck is on Odin when I go to select the .tar or the .md5 file form the zip, I can't locate the files. I've extracted them several times using different methods, but not a single time have I been able to extract a .tar or .md5 file, all I get is: META-INF folder, system folder and boot disk image, no .tar or .md5 file anywhere in the folders either.
Am I an idiot here or what am I doing wrong that I don't get the .tar or .md5 file?
Any help is appreciated, thanks!
i am not sure where you downloaded it from. i took it from sammobile and the name of the zip is: T320XXU1BNI1_T320DBT1BNJ1_DBT.zip inside it being a file named: T320XXU1BNI1_T320DBT1BNJ1_HOME.tar.md5
PS: i have a german device thats why the DBT code...please download yours...
mospantagruel said:
i am not sure where you downloaded it from. i took it from sammobile and the name of the zip is: T320XXU1BNI1_T320DBT1BNJ1_DBT.zip inside it being a file named: T320XXU1BNI1_T320DBT1BNJ1_HOME.tar.md5
PS: i have a german device thats why the DBT code...please download yours...
Click to expand...
Click to collapse
I am downloading it one more time from sam mobile just to make sure. How did you extract the zip (what program)? 7zip, winrar, etc?
i think i know whats going on. i use winrar for windows you probably use something else. inside .zip there is a .md5 file but inside .md5 file there are meta folders etc. some software consider it being an archive inside an archive and it doesn't even bother to tell you that probably it's extracting folders directly...
mospantagruel said:
i think i know whats going on. i use winrar for windows you probably use something else. inside .zip there is a .md5 file but inside .md5 file there are meta folders etc. some software consider it being an archive inside an archive and it doesn't even bother to tell you that probably it's extracting folders directly...
Click to expand...
Click to collapse
use 7 zip, there should be a .tar.md5 in the .zip only extract the .tar.md5. dont extract anything from the tar.md5. just select the tar.md5 in odin after you put your device in download mode
Hi,
I have downloaded the latest Basebandversion from this page: https://www.samdownloads.de/download/t805xxu1bpc4-dbt-5-0-2-germany/
But I cant install it over TWRP because it's a rar archive.
Included files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img (can I left this? wanna install PAC-MAN Rom after this update over TWRP)
sboot.bin
system.img
I can extract them and install them step by step over TWRP but then I cant install the .bin-files I think. So how should I install this for my SM-T805?
Hope that anybody can help me with that so that I can use PAC-Man Rom with the lates included security patch lvl.
My actually system is the following:
OS-Version: 5.0.2
Baseband: T805XXU1BOD3
Kernel-Version: 3.4.110-IronKernel_V2.5.5_TW_T805 - some [email protected] notation
Build: IronRom V2.5 T805
Pls dont ask why I want to change my current rom. My prefered one is CM but therefor is only an unofficial 13.0 version with a few bugs and the 12.x won't work. So I decided to switch to
PAC-MAN ROM.
Sincerly
Chaos234
Odin.
ashyx said:
Odin.
Click to expand...
Click to collapse
Ok, and can u tell me which file goes in which line? It's not decsribed and can I input all files at the same time so that it can run as one process?
Chaos234 said:
Ok, and can u tell me which file goes in which line? It's not decsribed and can I input all files at the same time so that it can run as one process?
Click to expand...
Click to collapse
It's not a rar archive, it's a tar archive with an .md5 extension.
Put in AP slot and flash.
ashyx said:
It's not a rar archive, it's a tar archive with an .md5 extension.
Put in AP slot and flash.
Click to expand...
Click to collapse
Ok, then I must unzip it because my one is a rar archiv and in it there is a folder and in this folder there is the .tar.md5 with a password protection.
If this works (I know the password) can odin flush it?
Chaos234 said:
Ok, then I must unzip it because my one is a rar archiv and in it there is a folder and in this folder there is the .tar.md5 with a password protection.
If this works (I know the password) can odin flush it?
Click to expand...
Click to collapse
Yes like I said previously you need to flash the tar.md5 in the AP slot.
Samsung Galaxy tab pro SM t525
Error while trying to flash Firmware
no pit file
Pls see Pictures
Ps help
PS: I was able to install TWRP
but I don't Know HoTo get further
Witzker said:
Samsung Galaxy tab pro SM t525
Error while trying to flash Firmware
no pit file
Pls see Pictures
Ps help
PS: I was able to install TWRP
but I don't Know HoTo get further
Click to expand...
Click to collapse
I've the same problem now,
have solved the problem?
Thanks
alonzimanuel said:
I've the same problem now,
have solved the problem?
Thanks
Click to expand...
Click to collapse
Afaik you need the multiple! part stock file for this:
The pit file is inside the CSC stock file and can be extracted by ->
delete .md5 from the extension
open the remaing CSC......tar file
copy pit to desktop
When in Odin give it the place where the pit file is and check "repartiton".
bmwdroid said:
Afaik you need the multiple! part stock file for this:
The pit file is inside the CSC stock file and can be extracted by ->
delete .md5 from the extension
open the remaing CSC......tar file
copy pit to desktop
When in Odin give it the place where the pit file is and check "repartiton".
Click to expand...
Click to collapse
Really thanks to you!
alonzimanuel said:
Really thanks to you!
Click to expand...
Click to collapse
I hope it helps.
Please keep us updated
btw. Idk if windows can open tar files as I do all preparations in Linux before using Odin in Windows.