hi this is not my rom i just saw this from a thread and im just translating it
[06/30/1910] EDGE Hero 1.1.2 - OC, A2SD, based on EU
Well, after throwing me almost all day yesterday and this morning fighting with new ROMs, I got a rooter, overclocking, put a2sd, change the launcher, optimize pngs, etc. And here it is:
EDGEHero 1.1.2 - based on the U.S. ROM
What's in?:
Root.
Superuser.apk nicer (see screenshots).
Apps2SD.
Dalvik2Cache
Autokill.
Busybox.
Own theme.
Kernel overclock up 810 MHz (Not you pass the 710-768, is too unstable).
CPU usage optimizations.
PNGs optimized to load faster and save space.
3D Gallery running like an angel.
Wifi working.
Linpack \u003d> 2.2-2.3 MFLOPS without OC, OC to 3.1 with 768. 5 MFLOPS with JIT.
Market ALL apps running.
Deodexada ROM
JIT Patch (Goes well, but make Nandra just in case).
Livewallpapers with launchers - with Sense T_T not go, you could modify a little Rosie.apk that appeared on the forums of Villain and allows the LWP, but it would be foolish because at the end while stop working.
I accept suggestions for future versions. That the work already achieved ROM. Now people need to say what he would like to include.
Instructions:
Do you come from another ROM?
-Make three wipes of rigor (or 5 as you give).
-Flashing the ROM.
-Restart.
"Upgrading from an older version?
-Wipe the Dalvik-cache.
-Falsheo.
Why JIT?
Start the normally-ROM, change wallpaper for one you have in the SD. REQUIRED.
"Reset> Recovery> Backup Nandra> Wipe Dalvik.
JIT-Flashing.
"Pray, pray a lot.
WARNING: DO NOT WIPE OF DATA. If borráis the data folder and my theory is correct, you **** the JIT and the ROM, I loved those bootloops come. If you're going to wipe the data for an update or something, you have to put the patch of JIT-OFF. Then you can put it back, but if not, do not start.
Difficult, eh?
"A2SD?
"If you already have the SD partitioned, no problem.
"The partitions must have is a fat and a ex2/ext3 (preferably ext2), minimum. You can also have swap partition, but this ROM does not use it.
"It is obligatory to do so, but advisable.
Download:
Version 1.1.2:
http://www.multiupload.com/C2KLJV3QN7
MD5SUM: f12bb83c25f496b7654ead34481b7b39
Version 1.1.1:
http://www.multiupload.com/D6I9LSVS5M
MD5SUM: d17e48b0d4f32f16985af04c444a0fce
Version 1.1.0:
http://www.multiupload.com/GLME2WGYW3
MD5SUM: 2986ec120aa2b0a04dcf83a3d4afa717
Version 1.0.2:
http://www.multiupload.com/HBAM7OF2OY
MD5SUM: 37ff4d0259ee5b3f1e6efa7fd8afb288
Patch to add search and voice dialing and set the default keyboard Castilian (added from 1.0.2):
http://www.multiupload.com/QV7NP9P0LT
Stock kernel (disables all optimizations, it is assumed):
http://www.multiupload.com/VZT5PXX9UM
Protected-apps-patch (is already installed as standard on versions> 1.0.1):
http://www.multiupload.com/909MI94LIA
Sense transparent clock (subject to metamorph)
http://www.multiupload.com/HSPX5KXNIU
JIT Pache VERY IMPORTANT INSTRUCTIONS VIEW:
http://www.multiupload.com/TMDBJELUBO
Patch JIT-OFF (warning if it does not work):
http://www.multiupload.com/YOWHLLENCG
FIX to use voice recognition on the keyboard (to be included from 1.1.1):
http://www.multiupload.com/75LO1BZO0S
FIX the Lockscreen (the bar no longer cover the "Snooze", including from 1.1.2):
http://www.multiupload.com/CYLNCRZ1YC
Changelog:
-1-07-10 -
Version 1.0.2:
Overclock fixed (theoretically), added file manager (Estrong file manager), fixed update-script to be no need to wipe data or yes (theoretical as well, I could not prove it), and added HTC_IME MOD, which comes with recognition voice.
-30-06-10 -
Version 1.0.1:
Fixed the OC to 810 MHz, protected from market applications, custom loading screen Sense.
Version 1.0:
Root, OC 691, and CPU optimizations several pngs, first version.
Thanks to:
The kid who sacrificed so that we have the root, the team Villlain APPS2SD the script to kendon the source code of your kernel and build a magnificent guide to Feeyo by some of the commands and build optimization . prop.
looks good
Awsome! Will add link to this thread in my thread right away
C0mpu13rFr34k said:
Awsome! Will add link to this thread in my thread right away
Click to expand...
Click to collapse
no problem mate if u want me to translate more i will u just tell me =)
Nuclear Overclocking holy moly that does not sounds to good
Feeyo said:
Nuclear Overclocking holy moly that does not sounds to good
Click to expand...
Click to collapse
844mhz lol
Err... a "CD-ROM" based rom for my hero.. think i might just stick with an established one rather than a peripheral one
these numbers..... 800 mhz and above.... are impresive, but i am absolutely sure that NOONE will find them usable.... (i don't mean to offend the aouthors of the rom) .
woah
let me know if somebodies device can use it! 800Mhz...
liljom said:
woah
let me know if somebodies device can use it! 800Mhz...
Click to expand...
Click to collapse
Computerfreaks does
Wow, thanks for the info, but this translation is horrible lol
Where it says "nuclear overclocking" it should say "kernel overclockable", sorry to disappoint you
Also, I haven't tested it, but it says it's overclockable to 810Mhz, don't know where you get the 844Mhz from
aleixps said:
Wow, thanks for the info, but this translation is horrible lol
Where it says "nuclear overclocking" it should say "kernel overclockable", sorry to disappoint you
Also, I haven't tested it, but it says it's overclockable to 810Mhz, don't know where you get the 844Mhz from
Click to expand...
Click to collapse
i now i think the guy who wrote it must of been sleepy lol and i heard u can go 844mhz i cant cuzz i hae a week hero mine can only go up to 768mhz
aleixps said:
Wow, thanks for the info, but this translation is horrible lol
Where it says "nuclear overclocking" it should say "kernel overclockable", sorry to disappoint you
Also, I haven't tested it, but it says it's overclockable to 810Mhz, don't know where you get the 844Mhz from
Click to expand...
Click to collapse
maybe it was made by gtranslate.
but it goes up to 844Mhz. I installed it : )
Nice one, very nice
asad510 said:
Computerfreaks does
Click to expand...
Click to collapse
Yeah baby! xD It gets EXTREMELY unstable with JIT on though and it cannot take more than 800MHz with JIT and still it is VERY unstable but with JIT of I can take it all the way only with minor problems
EDIT: Seems like it does nothing when you overclock over 787MHz seems like it's the max... Going to try overclock widget and see if that can move it further
EDIT2: Set the overclock to 787MHz and it worked fine then I set it to 806MHz and it seemed like it set the clock but also that the max speed was now set to 768MHz. Then it put it all the way up to 844MHz and my phone froze... There must be some kind of bug...
EDIT3: I have no idea if my phone is actually running over 800MHz cause everytime I set it over 787MHz it just shows 480MHz all the time...
so.. does the 100mhz jump show any drastic improvement in the response of the touch and program loading?
rafi300 said:
so.. does the 100mhz jump show any drastic improvement in the response of the touch and program loading?
Click to expand...
Click to collapse
Nope OC over 729 MHz on my phone slows it down but I guess if i kept pressing the linpack button eventually it would hit that record breaking spot xD
It can be translated on the website...
The text can be translated on "HTCMania"...
Just go tho the bottom and click on the British Flag... It is about the twelfth from the left...
Aqmaqr said:
The text can be translated on "HTCMania"...
Just go tho the bottom and click on the British Flag... It is about the twelfth from the left...
Click to expand...
Click to collapse
lol never saw that lol
Aqmaqr said:
The text can be translated on "HTCMania"...
Just go tho the bottom and click on the British Flag... It is about the twelfth from the left...
Click to expand...
Click to collapse
It seems that instead of that, it was translated to taiwanese from HTCMania, and then to english using gtranslate lol
Since i've installed this ROM my Phone doesn't ring anymore. Is there any solution for this.?
thx in adv.
Related
FOR 1.5 ROMS ONLY.
Thanks to teknologist, maxisma, toastcfh, and all those who contributed to cracking the CPU open for overclocking.
Looking at the CDMA forums, it seems they were a step ahead of us with their kernel speedups. With help from their work, and particularly, from toastcfh, I've been able to patch and compile a kernel based on teknologist 1.9 with added features and speed.
Added features and changes so far:
- BFS, brainfuck scheduler. Basically, helps the CPU respond faster.
- Overclock. Up to 768MHz is enabled, but defaults to a safer 595MHz. It should be compatible with SetCPU. Be sure to use the custom setting.
- Deadline I/O scheduler. It should make file read and write operations a tad faster. We'll see if it really does.
Git repo: http://github.com/Soaa-/-lightspeed/tree/master/kernel-hero/
It runs at 595MHz! How do I make it faster?
Download and install SetCPU. It's available for free on xda-developers, but you can support the author by buying a copy on the market. Launch SetCPU and pick the custom option.
My phone doesn't wake sometimes! Or, it wakes and the crashes!
Use SetCPU and set the CPU governor to 'performance'. Try lowering the clock speed if the problem persists.
Can I flash this on recovery?
The first overclocked kernel was available only as sources, and binaries had to be flashed manually. Lightspeed comes as a standard update.zip package to be flashed through recovery though.
Does Wi-fi work?
Yes.
Does compcache/ramzswap work?
No idea. I don't use it.
Is it noticeably faster?
Yes. This isn't a 5% increase in speed, where the difference is only seen through benchmarks. Most phones can handle 691MHz, which is a 30% increase in speed. The lucky ones who can clock up to 768MHz get a 45% increase. The net result is a more responsive phone.
Does the CPU frequency scale to usage?
It can, if you keep the ondemand CPU governor. However, there have been reports of instability using the ondemand governor, so the performance governor is recommended instead.
Do you accept donations?
Not yet, as my work so far has just been putting other people's work together. My priority now is to make our phones better, not to make money.
0.1.1
Integrated setcpu.txt into update.zip.
0.1
Initial release
Hi,
Looks great! Does it work in 2.1 roms?
Greetz
I want to know also
Does it work on 2.1 oms ??
Sorry, the kernel is made for 1.5 ROMs only. The only decent kernel for 2.1 is still the same leaked one from a while back, I think.
ok, gonna try it now on a 1.5 rom, with setcpu.
let you know if speed is there
i use a stock rom, and have the recovery menu so can i put the zip on the sd card and then flash it ?
I am also interested in a guide on how to install/flash this properly.
Just like knudsen81 said. Everything working perfect with CPU running on 595Mhz.
From what I see, it should be flashed like all other kernels so just like ROM or radio.
Does this kernel scales overclocking depending on CPU load? For ex. lowers when idle or screen turned off.
ZeppeMan said:
Just like knudsen81 said. Everything working perfect with CPU running on 595Mhz.
Click to expand...
Click to collapse
when setcpu launches, it doesnt have the "auto detect" option
when i click on custom, it shows 528 max and no more..
what am i doing wrong here?
flashed the update.zip like a normal rom/radio btw.
Good job! looking forward for testing. What's actually missing from making overclocking work with 2.1?
mixxy said:
when setcpu launches, it doesnt have the "auto detect" option
when i click on custom, it shows 528 max and no more..
what am i doing wrong here?
flashed the update.zip like a normal rom/radio btw.
Click to expand...
Click to collapse
I used Overclock widget to see the speed of the CPU. I only wanted to confirm if the 595Mhz was true
Also Linpack score went from 2.3 to 2.6.
mixxy said:
when setcpu launches, it doesnt have the "auto detect" option
when i click on custom, it shows 528 max and no more..
what am i doing wrong here?
flashed the update.zip like a normal rom/radio btw.
Click to expand...
Click to collapse
Create a file named setcpu.txt at the SD card (so it will be /sdcard/setcpu.txt)
and enter the following into that file:
Code:
96000,115200,134400,153600,172800,192000,211200,230400,249600,268800,288000,307200,326400,345600,364800,384000,403200,422400,441600,460800,480000,499200,518400,537600,556800,576000,595200,614400,633600,652800,672000,691200,710400,729600,748800,768000
This will allow setting frequencies from 96 to 768 MHz via SetCPU
Thanx 4 the great work.
2 questions.
first, what does "Git repository" means and when will u release it?
second, can i flash it over Modaco 3.2 through recovery mode?
sorry 4 my bad english.
k0rner said:
Create a file named setcpu.txt at the SD card (so it will be /sdcard/setcpu.txt)
and enter the following into that file:
Code:
96000,115200,134400,153600,172800,192000,211200,230400,249600,268800,288000,307200,326400,345600,364800,384000,403200,422400,441600,460800,480000,499200,518400,537600,556800,576000,595200,614400,633600,652800,672000,691200,710400,729600,748800,768000
This will allow setting frequencies from 96 to 768 MHz via SetCPU
Click to expand...
Click to collapse
thanks for the help, lets try this out and see what happens =P
worked like a charm, thanks a lot =)
Does the camera work?
Camera, WiFi should work because it's an (old) 1.5 Kernel.
Other overclocked kernel works faster than this one (and with this one i've freezed ..) ..
With the other linpack gives me 3.2 3.3
with this 2.6 at max ..
:/
Flemmard said:
Other overclocked kernel works faster than this one (and with this one i've freezed ..) ..
With the other linpack gives me 3.2 3.3
with this 2.6 at max ..
:/
Click to expand...
Click to collapse
Have you set the cpu to 768? because the other kernal runs at 710 by default where as this runs at 595 but can be clocked all the way up to 768.
Please read the forums before complaining it doesn't do something.
I took Defy MIUI 2.3.30 from miui.us and ported it for the Bravo and added a few things to make it more functional or fix bugs.
If anybody has anysuggestions or things they want added in, let me know and I'll try to add them in.
Still working on multilanguage. I have almost working multilanguage, 14 languages, but plugging in to pc can corrupt sdcard data, no tethering, and no copy\paste to\from pc. I don't want to release until thats fixed. No one wants to lose data.
The multilanguage framework-res.apk I have calls a 2nd usb notification and the two confilct with each other. I'm working on removing the calls to the 2nd mount tool, but its taking time. I've also uploaded the framework-res.apk if anyone can help to fix it.
2.3.30
Added Camera
Build.prop changes
Added CM7 DSP Manager + Audio Effects
Removed Torch
Overclocked\Undervolted (If you don't like it you can always change it)
Changelog 2.3.30.1
Replaced /system/lib/hw/ with CM7 Kobe
Removed Audio Effects
Changed CM7 DSPManager to WajkIUI's CM7 DSPManager
Changed GPS to AGPS
Updated Google Play
*Added KickAssKernelizer_Tweaks_Installer_Update_3_RC7.1*
*Added V6_SuperCharger_for_Android-update8*
*Added Die-Hard_Battery_Calibrator_RC5*
*Added 3GTurboCharger_Installer_Update_3_RC7*
Added Yaffs Explorer
Added Catlog
**Added No-Frills Cpu Control**
Added CpuSpy
Added Terminal Emulator
Added TweetyPeetys's Zipalign on Boot\Sdcard Read Ahead Tweak
Changelog 2.3.30.2
Moved Supercharger scripts to xbin for easier execution and less problems
Added 4 Way Reboot
Added Volume Button audio track skip when screen off
Added Beats Audio
Added Bravia Postprocessing mod
Added Multiling Keyboard
Added MortPlayer Music and Widget (for myself, I don't use miui music)
Changed rom base from miuiandroid.com to miui.us
Download MIUI Bravo 2.3.30.2
md5sum = e6151d7f4a10d0a1ff1a1c7eb60ea809
Install Notes
The Google First Run Wizard starts on the last page, then works normally after clicking finish.
*Scripts aren't activated by default. To use scripts, open Terminal Emulator, type "su", then use one of the following commands to use the scripts: "v6.sh" for V6SuperCharger "3g.sh" for 3g TurboCharger "kak.sh" for Kick Ass Kernelizer "dhb.sh" for Die Hard Battery Calibrator. I shortened all the script names to make the commands easier to type.*
**On first boot, open No-Frills Cpu Control, change Governor to Conservative or Smartass, change io scheduler to noop (not necessary, but is recommended), and select apply on boot. This will fix the Governor problems and use my overclock settings. Make it look like the last screenshot.**
The voltage for Vsel2 and Vsel3 may be low depending on your phone. If the rom acts unstable, increase Vsel2 by 1 and boot. If its still unstable, increase Vsel3 by 1 and boot. Repeat as necessary. They work perfect on my phone.
Thanks
Zepplinrox's Script Links For getting updated scripts and clicking thanks.
Thanks to TweetyPeety for his Zipalign scripts and to Mataflakitas for pointing out WajkIUI's working CM7 DSPManager
skeevy420 said:
I took Defy MIUI 2.3.30 from miuiandroid.org and ported it for the Bravo. It runs smooth and stable; at least for the hour I've been using it. I'm going camping for a few days and need a stable rom.
I kept the rom as stock as possible. I'd post screenshots, but I'm already on a custom theme and don't feel like changing back....and besides, they're the same as Pikachu dammit, just go look there.
[dded Camera
[*]Build.prop changes
[*]Added CM7 DSP Manager + Audio Effects
[*]Removed Torch
[*]Overclocked (If you don't like it you can always change it)
[/LIST]
Download MIUI Bravo 2.3.30
EDIT
After messing around with overclocking, I found its bugged. To fix, Install No Frills Cpu Control from Market, boot with performance, and use no frills to select any other governor and select apply on boot.
Click to expand...
Click to collapse
Great... im like genius thanks skevy420...
CM7 DSP Equalizer Crash
Found "Bug"
Using the equalizer makes CM7 Dsp Manager crash. Not really a bug since DSP Manager wasn't made for MIUI and I added it in. Probably gonna remove it if I can't get it to fully work.
I'll reup a new version without DSP Manager around 8 pm central time, or 9 hours after this post. I'll include No Frills Cpu, zipalign on boot, sdtweak, and add in Supercharger, KAK and 3g Turbocharger (unused and unconfigured so you can tune them how you like).
thanks
skeevy420 said:
Found "Bug"
Using the equalizer makes CM7 Dsp Manager crash. Not really a bug since DSP Manager wasn't made for MIUI and I added it in. Probably gonna remove it if I can't get it to fully work.
I'll reup a new version without DSP Manager around 8 pm central time, or 9 hours after this post. I'll include No Frills Cpu, zipalign on boot, sdtweak, and add in Supercharger, KAK and 3g Turbocharger (unused and unconfigured so you can tune them how you like).
Click to expand...
Click to collapse
thank...
it can see a glance this work...skeevy420
http://forum.xda-developers.com/showthread.php?t=1161110
Update Bump
Quite a few changes. Look at the first post. I feel bad for the 19 who installed the first one...this one's better.
spanish
skeevy420 said:
Update Bump
Quite a few changes. Look at the first post. I feel bad for the 19 who installed the first one...this one's better.
Click to expand...
Click to collapse
Only lacking the Spanish language......
I believe that I can wait for you since I am a novice not like changing the language thank you very much...skeevy420....
I'll attempt to add in Spanish. Just found the MIUI Rom translation project. It'll take me a while to do it, since I don't speak Spanish and can barley read it.
It seems to be a simple enough process. Decompile the apk, add in a new language folder, make a new xml with translated strings. Spanish is 100% completed at the site, but I still have to make sure everything is in the same order as Engligh.
Link to translation guide
Link to Spanish Translation site
EDIT
After looking through some of the translations, many strings are missing. I can provide the English translation files for anyone who wants to translate the rom to another language.
thanks
skeevy420 said:
I'll attempt to add in Spanish. Just found the MIUI Rom translation project. It'll take me a while to do it, since I don't speak Spanish and can barley read it.
It seems to be a simple enough process. Decompile the apk, add in a new language folder, make a new xml with translated strings. Spanish is 100% completed at the site, but I still have to make sure everything is in the same order as Engligh.
Link to translation guide
Link to Spanish Translation site
EDIT
After looking through some of the translations, many strings are missing. I can provide the English translation files for anyone who wants to translate the rom to another language.[/QUOT
I believe that I can wait for you since I am a novice not like changing the language thank you very much...skeevy420....
The video can check the chamber this working I do not believe that it is a failure to record video
Click to expand...
Click to collapse
faile
mataflakitas said:
skeevy420 said:
I'll attempt to add in Spanish. Just found the MIUI Rom translation project. It'll take me a while to do it, since I don't speak Spanish and can barley read it.
It seems to be a simple enough process. Decompile the apk, add in a new language folder, make a new xml with translated strings. Spanish is 100% completed at the site, but I still have to make sure everything is in the same order as Engligh.
Link to translation guide
Link to Spanish Translation site
EDIT
After looking through some of the translations, many strings are missing. I can provide the English translation files for anyone who wants to translate the rom to another language.[/QUO
The video can check the chamber this working I do not believe that it is a failure to record video...
I believe that I can wait for you since I am a novice not like changing the language thank you very much...skeevy420....
The video can check the chamber this working I do not believe that it is a failure to record video
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Multilanguage help
I found a multilanguage pack for miui 2.3.30 but it makes a 2nd USB notification app appear and makes USB not work right. If anybody knows what activates USB notification it'll help me out a bunch.
I added in beats audio, 4 way reboot, volume button track skip on screen off. I'll post updated Tom later, I want to fix multilanguage USB first. Either way, update later today.
Edit--Found problem
Framework-res.apk
Now to try and fix it...
I've noticed that the MIUI Compass only works some of the time. Opening any other compass fixes it.....anybody have a good compass app to add? Or any system type app for that matter?
I need to look into using Aroma Installer.
The post wasn't even up for 1 minute and someone had already downloaded the newest version. Damt that was fast.
skeevy420 said:
I've noticed that the MIUI Compass only works some of the time. Opening any other compass fixes it.....anybody have a good compass app to add? Or any system type app for that matter?
I need to look into using Aroma Installer.
The post wasn't even up for 1 minute and someone had already downloaded the newest version. Damt that was fast.
Click to expand...
Click to collapse
This work already this in Spanish....?
No, not yet. Working on it. The only 2.3.30 multilangluage I've found has an extra USB notification system call in framework-res.apk and that call can cause sdcard corruption, apps not to function correctly, lose of data tethering, losing the ablity to copy and paste from the pc to the phone's sdcard. Probably other things too. Its just too unstable to add in for now.
I've attached the multilanguage framework-res.apk to the first post if someone wants to help make this multilanguage. So far I think the problem is a few strings in strings.xml in the language's values folder, and a line in ids.xml in the same folder. I've edited all the languages and removed all the calls, but I have recompile errors. I've tried 3 different versions of apktool.
I also forgot to add in dsp manager with the latest release. Not a big deal since Beats Audio works well, but I'll upload a patch for it later on today when I have the time for it. I was so busy with the multilanguage yesterday, and real life when I wasn't modding, that it slipped my mind.
skeevy420 said:
*Scripts aren't activated by default. To use scripts, open Terminal Emulator, type "su", then use one of the following commands to use the scripts: "v6.sh" for V6SuperCharger "3g.sh" for 3g TurboCharger "kak.sh" for Kick Ass Kernelizer "dhb.sh" for Die Hard Battery Calibrator. I shortened all the script names to make the commands easier to type.*
Click to expand...
Click to collapse
What are these scrips for ?
And was the original MIUI 2.3.30 build overclocked ?
PsyClip-R said:
What are these scrips for ?
And was the original MIUI 2.3.30 build overclocked ?
Click to expand...
Click to collapse
The scripts are for memory, kernel, 3g, wifi, and lots of tweaks. Try them out. I recommend using the automatic settings in V6 (forgot the exact #), then option 20; options 5 & 7 in 3g, and enable io tweaks in kak and let it run. They'll help a lot. The 3g.sh option 5 doubles my 3g down speed. Check out the link on the bottom of the first post, it goes to the new release and archive page for the scripts.
No, it wasn't overclocked, but I've ran overclocked with those settings since December on all the roms I've ran. Only a few CM7's have had problems with those settings, and usually its the CM7 rom being buggy that causes the crashes with the low voltage.
I've also seen overclock posts with people running [email protected], [email protected], [email protected] for better battery. That's just dumb. You'll harldy ever stick at 500, hell, you'll hardly stick at the 600 stock, especially with the default governor settings. I found that 700 is a good median value to use. Powerful enough to get the job done without jumping to Vsel3 and stable when undervolted. And 1100 helps run games smoother without having to bump up the voltage.
For governors; choose Conservative for Best Battery with slight lag, then Smart Ass for Slightly less battery with less lag, then Ondemand. Performance & Userspace are battery killers, but they also stay on Vsel3 and are great when staying plugged in. The conservative lag comes from trying to stay on the lowest Vsel it can and lowering as soon as it can. Same with Smart Ass. Use No Frills to choose the governor and apply on boot. Leave the bootmenu governor at Performance, Ondemand, or Userspace for a faster boot and then don't pick that governor in No Frills, the overclock module likes to bug up with changing to the same governor already in use.
Questions:
Are you working on spanish language for MIUI? I understand everything but I'd like to install this rom to my girlfriend's bravo, she likes it.
Does Bravia engie work for us? I think it didnt work for defy neither for us.
josuearisty said:
Questions:
Are you working on spanish language for MIUI? I understand everything but I'd like to install this rom to my girlfriend's bravo, she likes it.
Does Bravia engie work for us? I think it didnt work for defy neither for us.
Click to expand...
Click to collapse
Yes, working on Spanish. Maybe today or tomorrow. I'm having to use Google Translate on a hundred strings from 4 apks. After that I test.
I have no idea if Bravia works. I just added it in.
I'm having problems recompiling the apks no matter what method I do. I've tried a few methods with 3 different apktools. I'd just make a Spanish 2.3.30 rom, but there isn't one to make. The latest Spanish rom (miui.es) is 2.3.23. Other than that, the closest thing I can find is WajkIUI GB for Defy. I could port either one no problem.
The Pikachu Miui Rom has Spanish in it, if that helps.
can you build a clean install like MIUI does ?
I really appreciate your build, but i don't like overclock and software included
PsyClip-R said:
can you build a clean install like MIUI does ?
I really appreciate your build, but i don't like overclock and software included
Click to expand...
Click to collapse
I'd love a build like that too!!
Hello,
I'm reactivating this thread since I cannot talk with samm every now and then to update the OP from this thread here.
What works:
It is stable for a daily driver but there are definitely things that doesn't work. For starters, the Hero is too small for ICS since we don't have any GPU posibility. Adreno 130 drivers are oh, too small and too bad for animations on ICS, they suck even in GB and Froyo. Still, the statusbar and fling are much smoother than other android releases because that's how ICS is built. It is more RAM friendly and it looks, well, sexy!
Will try and update this rom when it will be possible. We might jump on the bandwagon of 4.0.4 if I can make it to move faster than it moves right now (yes, I have an experimental build).
If one of you want to join me to develop this rom further, send a PM and I will send you some details about what is in the works, how far it is. I know there are few people that can work on builds here on Hero thread but if we work together, we can pull this out one more time.
FLASH THIS AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR:
- YOUR BRAIN
- YOUR HOUSE
- YOUR PHONE!
ON with the ROM. What has been changed:
Added:
Code:
- Google Music apk (yes, official google music app);
- Explorer.apk
- Latest and greatest LV Kernel 1.2+
- Revert to Evtoolbox back from 4.0.3 builds
- Set the cpu to scale at 352-672 from startup
- Tweaked the build.prop a little (added some experimental lines)
Why this is v3?
Because the memory management inside the kernel (remember, INSIDE THE KERNEL) is tweaked and fixed to nice values in order to allow our hero to better multitasking (you can find these values in my other rom called 1ceCream BEAST Flavor). No need for tweaks in init.d to do the job, no bull****.
Just plain and simple!
If you are texting someone, sending an email, playing a game, doing something, and you are locking the screen, after unlocking you will find that the application is ON the screen, and is not closed how it is in many other roms for hero. The multitasking with my values is so much better, you will definitely like it!
Click to expand...
Click to collapse
The rom moves fast, even if it is ICS, I have the animations on and no force GPU in Developer settings and it is still moving so much fast than the older builds.
Overall, I am happy with this release and I hope you will be too! Post me some of your opinion and tell me if it is fast or am I dreaming!
Some user's feedback:
Loxxy said:
wow 'HeroICS v3' is running on rocket power !!! what the hell
amazing job
Click to expand...
Click to collapse
Carrier Internet connection issue:
- Create Manual APN for provider's internet connection.
DOWNLOAD HeroICS v3
If you make these changes maybe you'll see better performance, the hero can't handle dithering on anything higher than stock GB or Sense froyo and doesn't have enough RAM for 48mb of dalvik heapsize. I may be wrong but these always worked for me in the past altough ICS is supposed to be better on RAM.
dalvik.vm.execution-mode=int:fast
dalvik.vm.heapsize changed to 24m or 32mb
persist.sys.use_dithering=0
Good work. Flashing now.
How about keeping this as lite as possible, only the absolute essentials pre-installed, everything else as optional zips / apk. For instance, I personally have no use for the music player.
I would really like to see a bare bones, fast and stable ics rom where you just add what you need.
---------- Post added at 03:56 AM ---------- Previous post was at 03:16 AM ----------
Unexpected reboot just as I was about to install Opera Mini. Followed by: "New Sim Detected, reboot required." Never seen that before.
I've applied CSL00's values.
Wonder if V6 Supercharger or Auto Memory Manager can improve things.
Play Store is noticeably faster. Unsure if was CSL00's values or the introduction of AMM.
Regarding the error message: 'No more room on this home screen.'
In Play Store app. Menu > Settings > Deselect Auto-add widgets.
Second unexpected reboot, otherwise things are getting faster. No wifi issues, BT still won't pair.
Running AMM on 'Aggressive.'
CSL00 said:
If you make these changes maybe you'll see better performance, the hero can't handle dithering on anything higher than stock GB or Sense froyo and doesn't have enough RAM for 48mb of dalvik heapsize. I may be wrong but these always worked for me in the past altough ICS is supposed to be better on RAM.
dalvik.vm.execution-mode=int:fast
dalvik.vm.heapsize changed to 24m or 32mb
persist.sys.use_dithering=0
Click to expand...
Click to collapse
dalvik execution mode was on fast until I changed it in the last second to "jit".
vm.heapsize was changed to 48 because I was testing 32 mb and I saw that it takes a little while to enter in one application. With 48 mb the time is reduced somehow. Please feel free to change it to 32 mb if you want. Dithering, well here is a mistery, I don't know if this works in ICS. It does look a little better than with it changed to 0 and my phone can suport dithering pretty well.
About the reboots, please install set cpu and set your max cpu frequency to a respectable value such as 691 or lower. I suggest using governor smartassV2.
The whole rom does feel a little snappier but we have an issue when someone calls you and after 20 seconds the call gets interrupted. I'll look into that today after work and see if I can fix it somehow.
I've tried Supercharger, the V8 doesn't wanna start on ICS and when applied V6 with option 6, the phone just got stuck on bootloop.
The reason that I've made it like this with apk.s that you can easly uninstall is that I didn't want you guys to have to flash any other optional zips or anything. But as I said, feel free to do what ever you want and uninstall those unused apps.
Oh, If you want to try supercharger yourself, you have to first delete these scripts from /etc/init.d:
03tweaks
04netspeed
05fixsdcardspeed
06loopy_smoothness_tweak
15cleanup_init_ram
16sqlite_optimize
17speedy_modified
Just to avoid any unexpected issues.
L.E:
CAN SOMEONE PLEASE, make a LOGCAT while you are in a call and save it to a txt? I want to see if we can narrow down the problem of disconnecting. I am unable to make a logcat atm.
1ceb0x, back to using your original build.prop, and Setcpu. Things seem more stable.
I'm looking for a notification toggle (cm-style) that has no icon when running (or only hides it, leaves a space.)
I will make a logcat, but I've tried aLogrec and all it seems to produce is an empty file. Should it not be dumping info on any activity I do?
lost101 said:
1ceb0x, back to using your original build.prop, and Setcpu. Things seem more stable.
I'm looking for a notification toggle (cm-style) that has no icon when running (or only hides it, leaves a space.)
I will make a logcat, but I've tried aLogrec and all it seems to produce is an empty file. Should it not be dumping info on any activity I do?
Click to expand...
Click to collapse
Seems stable than samm000's build.prop?
Glad to hear this.
As for the logcat, you cannot use any of the readers on the market because they will not work on ics. I've tried to make a log using android sdk but it seems that we need a file called 'main' in /dev/logs. I tried to make the file manually but then I've encountered an EOF read error on cmd. I forgot to make permissions for the respective file. Will make it again now and see how it goes.
As for cm notification toggle, I don't know what are you talking about. The notification toggle on ICS is nicer than any other available .
Tell me if you have calls issue (your call is disconnected after some seconds)?
Well it is probably more stable because I reduced the cpu speed.
In a voicecall now, 2mins+. Call lost around 3 mins.
6mins+ this time and still going...
lost101 said:
Well it is probably more stable because I reduced the cpu speed.
In a voicecall now, 2mins+. Call lost around 3 mins.
Click to expand...
Click to collapse
Did you checked the box "Force GPU rendering" in Develop Options?
Is it stable because I've added graphical tweaks and some tweaks to speed...
Yeah, 'Force GPU rendering' is enabled. In a voicecall now, 10mins+.
I ended the call myself at 22mins.
lost101 said:
Yeah, 'Force GPU rendering' is enabled. In a voicecall now, 10mins+
Click to expand...
Click to collapse
10 minutes without disconnecting? What's your settings on network? GSM ONLY, or WCDMA preferred?
(to see this, please go to dialer and dial *#*#4636#*#* , then go to Phone information, scroll down and you will see the value above the button "Turn Off Radio").
as default the version is WCDMA preferred. What Radio firmware are you using?
also, did you installed Habarug's tweak to hide the end button call during a call? (it's in samm000's thread).
this information will be helpful! cheers
WCDMA preferred. Radio: 63.18.55.06PU_6.35.15.11
I have not installed Habarug's tweak.
lost101 said:
WCDMA preferred. Radio: 63.18.55.06PU_6.35.15.11
I have not installed Habarug's tweak.
Click to expand...
Click to collapse
and you had 10 minutes without disconnecting? you were able to end the call normally?
1ceb0x said:
and you had 10 minutes without disconnecting? you were able to end the call normally?
Click to expand...
Click to collapse
It was 22mins when I ended the call myself.
Regarding notification toogle this is what I mean: 15 toggle status bar as implemented in this rom. Check the video.
Very ODD.
I have 63.18.55.06OU_6.35.15.01 on my device with WCDMA preferred but I keep getting call disconnected after 10 seconds or so.... regarding the notification status bar power widget, I don't know what to say. I'm not a dev so...
i'm trying to find a way to make a log cat of the calling issue because I don't really want to change my radio because my version seems to be battery friendly...
thank you for your support
Obviously the notification thing isn't even important right now. I shouldn't really have mentioned it.
I thought this radio was considered one of the best to be using, and find the battery life to be good on it.
Don't know if its the best really. But I've flashed it anyway. Since this will end my calling interrupt, it will be a small price to pay if the battery doesn't play well.
Will test the voice calling. Btw, I am maybe working on RC2, with some new tweaks and fixed latinime.apk keyboard..
can confirm right now that the latinime.apk is fixed.
@Habarug: are you using my mod or sam's rom?
Thanks lost, will try your radio, im on .14 atom
Just to clarify, the radio I am using still has calls dropping with ics. It seems to happen at random times. 1 minute into a call, 3 minutes or not at all. Maybe it's because of the numbers I am ringing. I can't be sure they would not drop anyway. But it sounds like it is doing better than some other radios.
Also, what about having a build based off ics 4.0.4?
lost101 said:
Just to clarify, the radio I am using still has calls dropping with ics. It seems to happen at random times. 1 minute into a call, 3 minutes or not at all. Maybe it's because of the numbers I am ringing. I can't be sure they would not drop anyway. But it sounds like it is doing better than some other radios.
Also, what about having a build based off ics 4.0.4?
Click to expand...
Click to collapse
we have to fix this issues first and then talk about another version. anyhow, 4.0.4 is much laggier than this version. i saw a bit of logcat and some awkwardly errors regarding the "animations" but i was unable to save the log for future use.
I've asked Maclaw, a dev from Galaxy Gio/Fit/Mini who made CM9 possible on those device to look at our build and maybe with some luck he can see something that make this calls drop...
managed to past 3 minutes in call with your radio version lost101. cheers
L.E: I am unable to send PM's. so i cannot ask Maclaw for help.. too bad! I'll just have to post on their op!
Come on people.. test the build!
Welcome to Lightning ROM
MAJOR UPDATE, REV3, CHANG LOG IN SECOND POST**********
The goal when creating this today has been simple. Squeezing the most performance out of the T-Mobile Galaxy S III as I possibly could, without destroying your battery. This ROM was build with two things in mind - optimization and speed. Nuff said. It is based off the official Jelly Bean leak as of late last night and wild child's deodexed version he was kind enough to throw down. It will probably impregnate you, with twins, then not pay you child support. If you are ready to propel your device to levels above 9 thousand, you should probably keep reading. You have been warned. IT IS FAST! ..... yet... friendly...
Like myself, in the spirit of android, I am sure you all love customization. I am doing something a little different with this. Rather than add all the toggles, mods, themes, etc, I focused today on the performance aspect and will leave the theming up to you, and after you get it set up the way you want (as there will soon be and already is tons of pretty extras for this build) revert to post 2 of this thread for a nice little guide to odex this bad boy straight from Android UI via terminal emulator. I'll take care of the tweaking, you theme it the way you want, then wrap it up with some memory optimization of your own, or don't. Sound good? Thought so
Getting right down to it - a quick list of things modified here, and I know I am missing some things:
-Init.d support
-Busybox
-Deodexed (until you odex - see post 2)
-Rooted - duh
-CIQ removed***
-Debloated: removed a lot of stuff, but it is all avail' in the market, youtube, etc, you would have had to update it anyways -__-
-File system and SD read optimized for speed
-added freeza's custom CPU script to init.d ***see changelog in post 2
-Build.prop has been modified.
*added the 0 ring delay script
*wifi scan adjusted to 600
*media streaming optimized
*media recording optimized (video and image)
*data speeds optimized
-Database df on each boot / sql support - totally kanged this from somewhere else it was kanged... all credits due
-Memory optimizations
-Default IO scheduler optimized for flash-type disks (android devices)
-Carefully modified CPU parameters with performance in mind. Tweaked values to optimize IO throughput during heavy workload and multi-tasking, yet on the other end, CPU cycles are greatly reduced when system is not under heavy load. You will see this in performance :highfive:
INSTALLATION - follow this to the T, or I will ignore you. And keep in mind you might still have issues. Not every device is the same.
1. download ROM, put it on your external SD card, and verify it is good with an MD5 check
2. once all is well, boot to recovery
3. do a factory reset/data wipe (I have always been in the habit of being thorough and formatting anything 3 times)
4. format/wipe system (3 times recommended)
5. flash ROM
6. reboot (it will take a couple minutes)
7. once the device boots, let it stand alone for about a minute or so (i typically wait until it shuts off the display on its own) and ENJOY
NOTE: DO NOT TRY TO SIGN IN TO DROP BOX. I REMOVED IT. DL FROM MARKET!!
Also, some other things removed: browser, YouTube, calculator, some other stuff. I didn't remove anything that was not available in the play store. Wanted to keep it light weight. Do not try to sign in to anything other than your google account when you boot. Again, enjoy.
thanks to wild child, freeza, virus, steelH, dj, luke, ktoonz, and many others. mad respect to you all. i have implemented things that are either your direct work or things i have learned from you. so here is my humble shout out. if there is something i left out, somebody i didn't mention, please forgive me and post in this thread and call me out, i will happily update the OP with thanks. respect to you all
REV_3 - ready, set.. ok click now!
With morfic's kernel..... clocked at 1.83
ok... so if you are like me, and you REALLY wanna get intense with this, and just make it as bad A as you possibly can, keep reading....
This will essentially odex all files in your /system/framework and it will do it straight from the Android UI via my personal favorite app ... this is good because it frees up mem, and reduces DVM size. OPTIMALLL
1. download the odex.zip here --> PURPLE
2. extract all files with a file explorer, i prefer root explorer or fx file explorer
3. place the extracted folder and all of it's contents in /data/local/tmp ... so you should have /data/local/tmp/odex/+(misc files in new odex directory)
4. give the new directory and ALL contents FULL permissions. full read, write, and execute perms. your file explorer, if it has taken you this far, should be able to accomplish this
5. download this app TERMINAL EMULATOR dont worry it is free. open the app
Type the following commands - each new line should be executed with the enter key:
su (hit enter, it will ask for root)
/data/local/tmp/odex/odex (hit enter, you will see
you will see a bunch of outputs. there will be a message when it is done (honestly, like 10 seconds if that) saying something like "enjoy your hybrid ROM"
type "reboot recovery" (without the quotes)
device will boot into recovery immediately after you hit enter...
wipe cache and dalvik cache once more each, and reboot your device.
viola <--- this was spelled wrong. but i am going to leave it. because i can. rofl
THANKS*** freeza for sending me the the odex script, and you're welcome, for the bootclasspath for the script.. lulz. and thanks freeza for convincing me to download titanium backup again... and you're welcome for giving you the peace of mind that you can odex framework from android. el o el
****change log*****
rev3-December 1st, 2012 -uploading
-added morfic's alpha 23 kernel. OC'able to 1.83, no UV, L2 cache tables optimized, CPU hot plugged (for now, panel of=cpu1 off), pretty much an overhaul here. performance is ridiculous.
-removed CPU tweak by freeza (i still love you tho)
-optimized IO, AGAIN. adjusted ondemand parameters for a little bit better performance
-removed unneeded scripts from init.qcom.post_boot.sh file - positive effect on IO
-cleaned up build prop, added scripts for TCP windows, added network hack by... somebody... can't remember. File is in /etc/init.d/ "internet"
-optimized BT audio streaming
-added properties for optimal accessibility of T-Mos spectrum/towers
-disabled unneeded logging - save CPU cycles and power
-debloated some more. lightweight. DO NOT... try to sign in to dropbox upon first boot (if it even gives you the option) download the latest version of the app on the play store.
rev2-NOVEMBER 19, 2012
-removed some UI audio sounds (charger connection [for those that listen to music], lowbattery sound, volume toggle sounds, other annoying useless sounds such as boot up and power off)
implemented freeza's CPU control script for some amazing performance and battery life. thanks bud, as always, great work. i have been running this since he was finished with it, and it is absolutely amazing. your device with tons of unique and user friendly, editable scripts.
-freeza's CPU script adjusts CPU parameters for both cores based upon whether your device is charging, and how much battery you have left. it is a performance and battery friendly script that is power efficient and editable depending on what YOU want your device to do.
beta1-
initial release
all the things...
In rev 2, with freeza's CPU mod, you can navigate to init.d and you will see a "70cputweak" file. if you open that up, you can adjust CPU values and parameters of governors to your liking. for now, i left them as is - the way they were when freeza gave them to me. edit them with a file explorer and reboot and you are now adjusting your OWN values based on the performance and battery YOU desire. follow instruction in OP to flash
Thanks will try this later today
Sent from my SGH-T999 using xda app-developers app
Does teathering work on this?
ScottBroker said:
Does teathering work on this?
Click to expand...
Click to collapse
wireless/native? no. but my easy tether app works perfectly. i'll implement it, if i have time, in beta2... i haven't slept in two days lol
OP updated
Will the odex.me app work with this rom? I'm not lazy, just curious if there's an easier way to odex..tia
Sent from my SGH-T999 using Xparent Blue Tapatalk 2
Yeah does the odex me app work the same way than doing all that other stuff?
Sent from my SGH-T999
which tether app you using ?
Thanks
Odex me app will not work
great Rom thanks
Is this still running Touchwiz? How much RAM available? Other then your optimizations for speed what has been added or removed? Are animations gone due to the optimizations?
EGBTMagus said:
Is this still running Touchwiz? How much RAM available? Other then your optimizations for speed what has been added or removed? Are animations gone due to the optimizations?
Click to expand...
Click to collapse
All I have done is tweak properties listed. Didn't mess with animations, or anything. You guys can do all that with a theme, kitchen, etc... I would recommend wild child's work. It's great stuff. Like I said the reason for this is because after you get it the way you want, you can go in and odex it and finalize your OWN build the way you want it to look. I'm not too big on aesthetics. But I can make your device run better
And to answer your question, yes, it is still running touchwiz launcher by default. Again I would recommend apex or nova. touchwiz is awful IMO. nothing unique about it.
Rom looks great will be testing it tonight!
Can anyone confirm wildchilds kitchen is working?
Sent from my SGH-T999 using xda app-developers app
Liking the rom so far, only issue I have come across is that I can't get App2ExtSD2 working.
Can we use your Odex wizardry in any deodexed TW Rom?
SiNJiN76 said:
Can we use your Odex wizardry in any deodexed TW Rom?
Click to expand...
Click to collapse
yeah
http://forum.xda-developers.com/showthread.php?t=1994048
Thanks...didn't know he created a separate thread.
Anyway, the first thing I noticed was that when I try to sign into Drop Box from the initial boot sequence, it FCs... I also got nowhere near the Quad score the OP got. Mine was in the 3Ks. Just my experience.
CIQ?
SiNJiN76 said:
Thanks...didn't know he created a separate thread.
Anyway, the first thing I noticed was that when I try to sign into Drop Box from the initial boot sequence, it FCs... I also got nowhere near the Quad score the OP got. Mine was in the 3Ks. Just my experience.
Click to expand...
Click to collapse
I got over 5K in Quadrant, but I also came from a 100% stock phone (reset it to make sure there were no issues). DropBox fails intially because he removed dropbox from the rom.
EDIT:
I can't seem to find the stock web browser... has it been removed?
Hello XDA peoples, Today, 11/19/13, I update the OP with my _ICED_KERNEL_ vs. MeltDown
ther are two kernel both are samw except one is OCd to 2.2GHz and the other 1.89GHz
the 2.2ghz is labeled as meltdown. Enjoy them both test them both and report back benches bugs or other wise, peace ~Rushing
here are current changes to stock kernel
################
# CHANGE LOG: #
###############
Tested and Safe =]
1. Added =3 levels of OC @ 540MHz overclock to Faux's overclocking to 1890MHz =] YES!!!
the "YES!!!" indicates that I am proud to have contributed to the kernel as I knew I would.
was going to do this along time ago but I was discouraged by the depths of geekdom involved.. haha
2. Added the following SCHEDs in addition to stock
SIO
ZEN
fifo
vr
row
##############################################
Added the following GOVERNORS in addition to stock
badass
pegasusq
savagedzen
brazillianwax
intellidemand
interactiveX
lazy
lionheart
ondemandx
samsung
smartass
wheatley
lagfree
lazy
lulzactiveV2
smartassV2
scary
interactive
################################
3. Added fast charge so device charges faster while on USB like it does on AC = nice
The zip contains the modules needed in /system/lib/modules .
flash only over a UVMC6 build
make a nandroid
just flash and wipe caches in TWRP
full spare-time kernel building lover now,, expect more features to kernel every now and then
ICED_KERNEL.zip
thanks to XDA for all the useful guides I have found
thanks to Cl3Kener for keeping me interested in kernel
thanks to Jamison904
thanks to Faux
thanks to thewadegeek and his good tutorial on kernel building http://forum.xda-developers.com/showthread.php?t=1748297
thanks to eagleeyetom finally found his guide for git. http://forum.xda-developers.com/showthread.php?t=1877040
Check out my Git pages @ hallovveen31 and check the changes I made to the stock kernel at your leisure.
_to kernel devs or beginning kernel devs, click here_
I am still fixing my git hub right now looks like I switched repositories and made a few commits the wrong way like didnt show records quite right because of the mix. however I am going to fix that later I just realized this after looking to see if I made the kernel go to 1.89 ghz while booting up for a faster boot =] so no worries to you up and coming kernel devs I will show you how I did it on git the right way. to regular users this means nothing special to you. git is just a record of the files and text code in those files to share with others, which I def want to do since I couldn't find the coding for oc up to 1890mhz and would love to share that.
https://github.com/hallovveen31
DOWNLOAD NEW KERNEL WITH NEW RLE IMAGE ie no star but a "SHADOW" graffiti .rle
https://sourceforge.net/projects/beastmade/files/ICED_COLD_SHADOW_KERNEL.1.89.new.rle.zip/download
ICED_COLD with new bootup splash- image a.k.a. initlogo.rle
MELTDOWN
get your windows MD5 checker here
http://winmd5.com/
Linux users.. get gtk hash
Enjoy the meltdown..
Thanks to Kl3kener again for giving me some tips ]
WARNING: nothing ever is my fault, period. if this kernel harms your phone because you overclock your device @ 2268MHz for three months, its your fault, duh. Anyway, the device would sleep and cool down.. So you would have to try pretty hard to cause damages...
Mine
Sent from my SGH-M919 using XDA Premium 4 mobile app
DOWNLOAD latest kernel:
ICED_COLD_1890MHz
take it away rushing
Waiting for it!
Hey Rushing, just tried this on top of JMT8 (with super cache wipe/twrp 2.6.1) and WiFi seems to be broken! Toggle in settings will not stay in ON position. Flashed back to twrp 2.6.0 because of your instructions and tried again (no cache wipe),same result. Flashed back to Tiberious 2.1 (no cache wipe) and phone booted up with WiFi on and working again.
mad4some said:
Hey Rushing, just tried this on top of JMT8 (with super cache wipe/twrp 2.6.1) and WiFi seems to be broken! Toggle in settings will not stay in ON position. Flashed back to twrp 2.6.0 because of your instructions and tried again (no cache wipe),same result. Flashed back to Tiberious 2.1 (no cache wipe) and phone booted up with WiFi on and working again.
Click to expand...
Click to collapse
Okay, thanks for testing I likely will never have time to flash all the ROMs and test compatibility.
I will take another stab at it. this time around all the modules will be deleted and replaced
where as in the first version the modules were expected to flash over the old ones which i guess doesnt always werk as leftovers may be uncompatible.
new build 1.1 is up thanks for testing let me know of success or failure please..
the new build works for me on my own ROM.
Wi-fi working fine here but I'm also using Rushing's Shad0w ROM. (1.1 version of kernel)
Just out of curiosity, Rushing, which of your ROMs do you use as your daily on the hercules?
Just tried 1.1 and WiFi still won't turn on with JMT8, obviously compatibility issue between the 2 of some sort. Per @aahz, kernel appears compatible with your roms Rushing. To continue the test, I'm going to flash my Shadow 1.6 nandroid tomorrow and then try 1.0 and 1.1 both just to see (and confirm). Looking forward to your next Hercules rom brother, Later
Aahz Pervect said:
Wi-fi working fine here but I'm also using Rushing's Shad0w ROM. (1.1 version of kernel)
Just out of curiosity, Rushing, which of your ROMs do you use as your daily on the hercules?
Click to expand...
Click to collapse
thanks for the feedback
I flashed a ROM I made for myself the other day. it has some paid apps in it thats why its for me only and has trickster mod apk xposed installer xprivacy xthemeengineand app setting included... interested? I could remove the paid apps and let it go.. i just noticed that the [extra] toggles and battery are green and the settings_icons are regular yet greyed out rather than every color of TouchWix...
could upload it with the new kernel included. looks like I called it liquid shadow... also uploaded a ROM to SF here is before I even post it =] works good so far didnt test blue tooth hdmi out alot of thing but i suspect everything is good and improved https://sourceforge.net/projects/be...D_CRYSTAL_SKULLS_signed_11-12-13.zip/download
http://sourceforge.net/projects/bea...D_CRYSTAL_SKULLS_signed_11-12-13.zip/download
http://sourceforge.net/projects/bea...D_CRYSTAL_SKULLS_signed_11-12-13.zip/download
http://sourceforge.net/projects/bea...D_CRYSTAL_SKULLS_signed_11-12-13.zip/download
Aahz Pervect said:
Wi-fi working fine here but I'm also using Rushing's Shad0w ROM. (1.1 version of kernel)
Just out of curiosity, Rushing, which of your ROMs do you use as your daily on the hercules?
Click to expand...
Click to collapse
thanks for the feedback
I flashed a ROM I made for myself the other day. it has some paid apps in it thats why its for me only and has trickster mod apk xposed installer xprivacy xthemeengineand app setting included... interested? I could remove the paid apps and let it go.. i just noticed that the [extra] toggles and battery are green and the toggles... and the settings icons are regular tw, yet greyed out rather than every color of TouchWix... could upload it with the new kernel included. looks like I called it liquid shadow... also uploaded a ROM to SourceForge with the new kernel will post very soon... here it is https://sourceforge.net all seems good so far not tested bluetooth yet and hdmi out alot of functions are untested but I bet they all work close to perfect.
https://github.com/hallovveen31
Rushing said:
thanks for the feedback
interested?
Click to expand...
Click to collapse
Absolutely, that'd be great.:good:
Aahz Pervect said:
Absolutely, that'd be great.:good:
Click to expand...
Click to collapse
New kernel Over clockable to 1890 MHz plus more governors and schedulers fast charge
I bother you all with an updated OP and kernel
Changed the boot-up-image splashscreen, initlogo.rle, whatever you want call it. No more star rather a bit of graffiti "SHADOW" to match up with my new ROM version of SHADOW =] enjoy
Checking out the new Shadow Mastery ROM and Kernel version...awesome per usual Rushing. :good:
@Rushing bro please can u make this ROM for us I would be n heaven n I'd have ur babies but of course put that beast tweak on it
http://forum.xda-developers.com/showthread.php?t=1847600
Sent from my SAMSUNG-SGH-T989 using Tapatalk
Aahz Pervect said:
Checking out the new Shadow Mastery ROM and Kernel version...awesome per usual Rushing. :good:
Click to expand...
Click to collapse
yeah I see somebody got into the goodies already hehe ]
that was you huh, thanks you like it? no more pentagrams, all gone shadow has seen the light and trying to change for the better. yeah right ]
for everyone else that dont know where it is, here.
Rushing said:
yeah I see somebody got into the goodies already hehe ]
that was you huh, thanks you like it? no more pentagrams, all gone shadow has seen the light and trying to change for the better. yeah right].
Click to expand...
Click to collapse
I definitely dig it. I lean more towards Shadow over Crystal Skulls (theme-wise) so to have an updated version is great.:highfive: It's nice and fast with the new kernel and I like the subtle theme changes as well.
KERNEL UPDATE 2.2GHz
Updated the OP with this /
/
/
ICED_COLD vs. MeltDown 2.268 GHz
bump. this one can be on the first page for a while longer
what 2.2GHz kerenel ?!?