Related
alright i deleted htc sync and now for some reason i cant mount my sdcard. so i need to push via adb.
i cant figure out the commands to push a file to sdcard any help please.
im on mac but codes should be about the same
or how can i get to the setting and reset them where is lets you choose charge phone,mount.tether extc
BigBallin said:
alright i deleted htc sync and now for some reason i cant mount my sdcard. so i need to push via adb.
i cant figure out the commands to push a file to sdcard any help please.
im on mac but codes should be about the same
or how can i get to the setting and reset them where is lets you choose charge phone,mount.tether extc
Click to expand...
Click to collapse
I can help with the first part;
Syntax: adb push source destination
Example:
adb push file.apk /sdcard
ive been doin that. and it says adb not found.
or i get this
Code:
Last login: Wed Oct 27 15:57:03 on ttys000
Laptop-5:~ kgirouex$ cd /Users/kgirouex/Documents/android/sdk/tools/
Laptop-5:tools kgirouex$ ./adb push apple.zip/sdcard
Android Debug Bridge version 1.0.25
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
envivornment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
Laptop-5:tools kgirouex$
I don't know much about MAC but did you put the adb in the tools folder and direct the adb command from there for example in Windows its like this C:/Android/tools
sent through my Special Edition White HTC EVO 4g while in the ****ter
ins0dus said:
I don't know much about MAC but did you put the adb in the tools folder and direct the adb command from there for example in Windows its like this C:/Android/tools
sent through my Special Edition White HTC EVO 4g while in the ****ter
Click to expand...
Click to collapse
ya thats how i always run adb is in the tools folder. and the things i need to push are there also
I'm on the phone so the formatting of your post is jacked up, but it looks like you might be missing a space between your source and destination.
Sent from my blah blah blah blah
fachadick said:
I'm on the phone so the formatting of your post is jacked up, but it looks like you might be missing a space between your source and destination.
Sent from my blah blah blah blah
Click to expand...
Click to collapse
thanks. it supposed to read adb push apple.zip /sdcard i was doing the space after the slash and not before.
damnit, now it says cant push because /sdcard is a directory
redid it and pushed to sdcard/download and it worked wtf
Good! Don't you just love that feeling when everything runs smooth.. I hate all the troubleshooting bs
sent through my Special Edition White HTC EVO 4g while in the ****ter
Yeah, nice!
Sent from my blah blah blah blah
I downloaded and installed the sdk manager, downloaded and installed the sdk packages, and rebooted. Since I rebooted, I haven't been able to start up the manager to update anything (I needed to update adb).
Why is this?
Swyped From My Mikrunny'd Superphone Using Magic (TapaTalk 2 Beta 5)
If you're running windows it could be possible that after installing the new ask tools that the filepath for adb was screwed up somehow.
Sent from my Incredible 2 using Tapatalk
disconnecktie said:
If you're running windows it could be possible that after installing the new ask tools that the filepath for adb was screwed up somehow.
Sent from my Incredible 2 using Tapatalk
Click to expand...
Click to collapse
How would I go about fixing it?
Here's what I'm getting:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Tyler>adb
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device's
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
(<packages...> is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
C:\Users\Tyler>
Is this right?
http://forum.xda-developers.com/showthread.php?t=1178912
5. Run the following commands from your platform-tools directory.
Code:
> adb push fre3vo /data/local/tmp
> adb shell
$ chmod 777 /data/local/tmp/fre3vo
$ /data/local/tmp/fre3vo -debug -start FAA90000 -end FFFFFFFF
I am able to do "adb push fre3vo", "adb shell", and "chmod 777" without a directory. I tried adding my directory "C:\android-sdk_r16-windows\platform-tools" but it doesn't work, what do I do for "C:\android-sdk_r16-windows\platform-tools/fre3vo -debug -start FAA90000 -end FFFFFFFF"?
Edit: I just probably forgot how to add my directory correctly, could someone show me how? And how to use commands with it?
You would type in the command window "cd c:/(your directory)". Then whatever you type after that will take pplace in the directory you entered.
Sent from my HTC Desire Z using xda premium
Thanks, but it only works for the first command, but doesn't work for the last 2, I even deleted the fre3vo file from the platform-tools folder and put in the folder fre3vo in it instead, and they still do not work.
How do I add fre3vo to my directory correctly? Should the file or folder of fre3vo be in the platform-tools folder?
The fre3vo command is run on the phone via shell.
When you enter adb shell, it opens a prompt with $, this is the terminal for the phone itself. All you need to do it type in those commands.
Think of "adb shell" as "Start > Run > 'cmd' > enter" on Windows.
---------- Post added at 10:56 AM ---------- Previous post was at 10:51 AM ----------
UKTone said:
http://forum.xda-developers.com/showthread.php?t=1178912
5. Run the following commands from your platform-tools directory.
Code:
> adb push fre3vo /data/local/tmp
> adb shell
$ chmod 777 /data/local/tmp/fre3vo
$ /data/local/tmp/fre3vo -debug -start FAA90000 -end FFFFFFFF
I am able to do "adb push fre3vo", "adb shell", and "chmod 777" without a directory. I tried adding my directory "C:\android-sdk_r16-windows\platform-tools" but it doesn't work, what do I do for "C:\android-sdk_r16-windows\platform-tools/fre3vo -debug -start FAA90000 -end FFFFFFFF"?
Edit: I just probably forgot how to add my directory correctly, could someone show me how? And how to use commands with it?
Click to expand...
Click to collapse
I'm going to double post and give a run-down of what you are doing here as it sounds like you're confused.
"adb push fre3vo /data/local/tmp/fre3vo" - You're moving the fre3vo files from c:\blahblahblah\platform-tools to /data/local/tmp/fre3vo on the phone
"adb shell" - You are opening the phone's command line interface through adb (similar to what I said in my previous post).
"chmod 777 /data/local/tmp/fre3vo" - You are setting the read write permissions through the phones terminal for the file on the phone itself
"/data/local/tmp/fre3vo (insert extra commands)" - You are executing the fre3vo file with particular switches attached to the command.
after "chmod 777" I get:
"Usage: chmod <MODE> <FILE>
After "-debug -start FAA90000 -end FFFFFFFF" I get "-debug: permission denied" at the end.
Edit: rebooting phone and cmd, and about to try the other 5 -debug commands
Edit: This last time I just put in the commands without the directories, which seems to be the only way to get chmod 777 to work... You are correct I am confused, I would like to know what exactly to put into my cmd. Also forgot to put the file fre3vo back into platform-tools...
You have to specify the file you are changing permissions on. In this case it would be:
Code:
chmod 777 /data/local/temp/fre3vo
Essentially you are tell the phone: "Hey, that fre3vo file at /data/local/tmp location needs to have read/write access set to 777"
biohazrd51 said:
You have to specify the file you are changing permissions on. In this case it would be:
Code:
chmod 777
Essentially you are tell the phone: "Hey, that fre3vo file at /data/local/tmp location needs to have read/write access set to 777"
Click to expand...
Click to collapse
How?
Also "chmod 777' only works without a directory for me "adb push fre3vo" works without, and with both "cd /data/local/tmp" and "cd C:\android-sdk_r16-windows\platform-tools"
I'm sorry if it seems I a being difficult, I really can't figure this out.
Edit: also it's the "-debug -start FAA90000 -end FFFFFFFF" command that gives me a permission denied, not "chmod 777""
Edit: Reread your other post, I tried "chmod 777 cd /data/local/temp/fre3vo" but it tells me there is no such file or directory.
Ok, i think i understand the problem.
You think that the $ prompt is still the windows prompt, it isn't.
When you are at the command line in windows at the location "c:\blahblahblah\platform-tools" and type in the command "adb shell" you leave the windows command line and enter the Linux/Android command line for the phone. At that point you are entering linux commands, not windows, and they are executing on the phone (you're just viewing it on the PC). Linux commands don't need you to specify folder location like platform-tools.
So when I say
Code:
chmod 777 /data/local/tmp/fre3vo
It means "hey linux/android on the phone, take the Fre3vo file (/fre3vo) at location /data/local/tmp (on the phone) and give it permissions (chmod is the command giving permissions) equal to 777 (read/write/execute)"
chmod = the command to change permissions
777 = the permissions of read/write/execute
/data/local/tmp = the location of the file on the phone (it was moved there by adb push /data/local/tmp/fre3vo)
/fre3vo = the particular file you want to change the permission.
Make sense?
Ok I saw your post about file not found. Exit out of the windows command line and move the fre3vo file back to c:\blahblahblah\platform-tools like you had earlier. Start back over with the adb push command.
Code:
adb push c:\blahblahblah\platform-tools\fre3vo /data/local/tmp/fre3vo
adb = android debugger
push = move the file (from) location (to) location
c:\blahblahblah\platform-tools\fre3vo = location and actual file on the PC
/data/local/tmp/fre3vo = location on the phone you want the file moved to
When it moves successfully you should see something to the effect:
Code:
Fre3vo (275Kb/s)
Yes and no. So after the adb shell I am still supposed to be entering the commands on the cmd correct? Without any directories then? So just "$ chmod 777" but what about the "-debug -start FAA90000 -end FFFFFFFF" there are 5 others I haven't tried yet?
Also trying to add the directory "/data/local/tmp" or "cd /data/local/tmp" makes it fail everytime.
Also I am on the homescreen/standby, should I be somewhere else on the phone, like bootloader or something?
UKTone said:
Yes and no. So after the adb shell I am still supposed to be entering the commands on the cmd correct? Without any directories then? So just "$ chmod 777" but what about the "-debug -start FAA90000 -end FFFFFFFF" there are 5 others I haven't tried yet?
Also trying to add the directory "/data/local/tmp" or "cd /data/local/tmp" makes it fail everytime.
Also I am on the homescreen/standby, should I be somewhere else on the phone, like bootloader or something?
Click to expand...
Click to collapse
I don't think it matters where you are at on the phone.
Yes you would just enter commands like "chmod 777 /data/local/tmp/fre3vo" ($ is something that does not need to be entered).
I'm going to be away from the computer for about an hour. You may want to hop on IRC (do a search for it in these forums) and see if anyone there can walk you through it, otherwise ill be back later.
Sent from my HTC Vision using xda premium
Alright cool, thanks man, sorry if I gave you a headache lol.
And yeah I know, I was just adding that so you know I wasn't doing it before adb shell
No problem. The system ill be at has the sdk installed so I can take screenshots and load them.
Sent from my HTC Vision using xda premium
http://i242.photobucket.com/albums/ff137/UKTone/g21.png
http://i242.photobucket.com/albums/ff137/UKTone/g22.png
These show some of what I've been trying.
You don't need the "cd" before /data/local/tmp/fre3vo
Sent from my HTC Vision using xda premium
http://i242.photobucket.com/albums/ff137/UKTone/g23.png
http://i242.photobucket.com/albums/ff137/UKTone/g24.png
1. I tried without the cd, it doesn't seem to work without it...
2. fre3vo, should the file or the entire folder be in the platform-tools folder?
3. When you told me to do the irc thing, I downloaded mIRC, but while installing it said I didn't have permission to install, so I had to close and right click and run as administrator. This could be a possible problem? And any idea how to fix it?
Edit: By #3 I am thinking maybe this same permission problem is causing "-debug -start FAA90000 -end FFFFFFFF" to give me a permission denied response.
Honestly its been so long since I've done this I don't remember if it is file or folder. Let me review it all and let you know.
Additionally, here are some screenshots of the commands (ignore the prompts beforehand as my setup is probably a bit different than yours, only the commands matter).
By the way, what guide are you using?
Yeah I figured, it's been out for a while.
http://forum.xda-developers.com/showthread.php?t=1178912 I was linked to this guide from this guide http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
Btw I can't see the screen shots.
To elaborate, place the fre3vo file inside of the fre3vo.zip file and the misc_version file inside the misc_version_01.zipfile in your platform-tools directory
Click to expand...
Click to collapse
My guess would be the files, not folders. You need to execute fre3vo, so it would be a file.
I've never done a downgrade, so someone else might be able to chime in with some experience.
I think you should restar. Push the files to the phone again. Then start adb shell. Then run chmod 777. And try running fre3vo again.
Sent from my HTC Desire Z using xda premium
@ l337m45732 Still gives me a permission denied and I looked here:
http://forum.xda-developers.com/showthread.php?t=1411597
Am I supposed to put superuser on my phone first? If so do I just download it from the play store/market or use linda/astro with an .apk?
I get a permission denied when trying su.
Edit: I think once I get past this permission issue, I will breeze through the rest of the stuff. Also I tried doing everything after unlocking and setting my screen timeout to 30 minutes, still got permission denies.
Edit: I opened SDK Manager and updated everything and now I get it saying ADB servers didn't ACK.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>adb shell cat /dev/msm_rotator
adb server is out of date. killing...
* daemon started successfully *
/dev/msm_rotator: invalid length
C:\Windows\system32>adb push fre3vo /data/local/tmp
adb server is out of date. killing...
ADB server didn't ACK
* failed to start daemon *
error:
C:\Windows\system32>adb push fre3vo /data/local/tmp
adb server is out of date. killing...
ADB server didn't ACK
* failed to start daemon *
error:
C:\Windows\system32>
I consider this progress since something other than no such file or directory didn't come up when I tried the directory without cd. I got an ACK from "adb shell cat /dev/msm_rotator" and the solution was to have my phone unlocked at least once/have it fully loaded up. Idk what the solution/problem is with "adb push fre3vo /data/local/tmp" is yet.
Edit: Now it's back to saying cannot stat 'fre3vo': No such file or directory
Edit: so much for progress :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>adb shell cat /dev/msm_rotator
/dev/msm_rotator: invalid length
C:\Windows\system32>adb push fre3vo /data/local/tmp
cannot stat 'fre3vo': No such file or directory
C:\Windows\system32>adb push fre3vo
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device's
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
(<packages...> is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
C:\Windows\system32>adb shell
$ chmod 777 /data/local/tmp/fre3vo
chmod 777 /data/local/tmp/fre3vo
Unable to chmod /data/local/tmp/fre3vo: No such file or directory
$ chmod 777
chmod 777
Usage: chmod <MODE> <FILE>
$ /data/local/tmp/fre3vo -debug -start FAA90000 -end FFFFFFFF
/data/local/tmp/fre3vo -debug -start FAA90000 -end FFFFFFFF
/data/local/tmp/fre3vo: not found
$ -debug -start FAA90000 -end FFFFFFFF
-debug -start FAA90000 -end FFFFFFFF
-debug: permission denied
$
Edit: only difference I see is the daemon started successfully and failed, the other had neither, restarting phone and unplugging and going to try again.
Edit: I'm so tired of trying this, is there another way? Mainly just trying to do this http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD for the T-Mobile G2 and I was linked from that to this guide http://forum.xda-developers.com/showthread.php?t=1178912 please help.
Edit: http://theunlockr.com/2011/07/22/how-to-downgrade-a-gingerbread-t-mobile-g2-so-it-can-be-rooted/ :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd C:\android-sdk_r16-windows\tools\
C:\android-sdk_r16-windows\tools>adb push fre3vo /data/local/tmp
683 KB/s (9796 bytes in 0.014s)
C:\android-sdk_r16-windows\tools>adb push misc_version /data/local/tmp/
1645 KB/s (589849 bytes in 0.350s)
C:\android-sdk_r16-windows\tools>chmod 777 /data/local/tmp/fre3vo
'chmod' is not recognized as an internal or external command,
operable program or batch file.
C:\android-sdk_r16-windows\tools>chmod 777 /data/local/tmp/misc_version
'chmod' is not recognized as an internal or external command,
operable program or batch file.
C:\android-sdk_r16-windows\tools>/data/local/tmp/fre3vo -debug
The system cannot find the path specified.
C:\android-sdk_r16-windows\tools>
Edit: It finally freaking worked:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>adb shell cat /dev/msm_rotator
/dev/msm_rotator: invalid length
C:\Windows\system32>adb push fre3vo /data/local/tmp
cannot stat 'fre3vo': No such file or directory
C:\Windows\system32>adb push fre3vo cd /data/local/tmp
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device's
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
(<packages...> is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
C:\Windows\system32>adb shell
$ chmod 777 /data/local/tmp/fre3vo
chmod 777 /data/local/tmp/fre3vo
$ /data/local/tmp/fre3vo -debug -start FAA90000 -end FFFFFFFF
/data/local/tmp/fre3vo -debug -start FAA90000 -end FFFFFFFF
fre3vo by #teamwin
Please wait...
Attempting to modify ro.secure property...
fb_fix_screeninfo:
id: msmfb
smem_start: 802160640
smem_len: 3145728
type: 0
type_aux: 0
visual: 2
xpanstep: 0
ypanstep: 1
line_length: 1920
mmio_start: 0
accel: 0
fb_var_screeninfo:
xres: 480
yres: 800
xres_virtual: 480
yres_virtual: 1600
xoffset: 0
yoffset: 800
bits_per_pixel: 32
activate: 16
height: 80
width: 48
rotate: 0
grayscale: 0
nonstd: 0
accel_flags: 0
pixclock: 0
left_margin: 0
right_margin: 0
upper_margin: 0
lower_margin: 0
hsync_len: 0
vsync_len: 0
sync: 0
vmode: 0
Buffer offset: 00000000
Buffer size: 8192
Scanning region faa90000...
Scanning region fab80000...
Scanning region fac70000...
Scanning region fad60000...
Scanning region fae50000...
Scanning region faf40000...
Scanning region fb030000...
Scanning region fb120000...
Scanning region fb210000...
Scanning region fb300000...
Scanning region fb3f0000...
Scanning region fb4e0000...
Scanning region fb5d0000...
Scanning region fb6c0000...
Scanning region fb7b0000...
Scanning region fb8a0000...
Scanning region fb990000...
Scanning region fba80000...
Potential exploit area found at address fbb66a00:1600.
Exploiting device...
C:\Windows\system32>
Thanks guys for your help. the first half from the unlockr website did the trick.
Hi guys. I have problem with update my phone to 4.3 because I have error.
Code:
Pushing system.ext4 to (this process will take a while)...
Android Debug Bridge version 1.0.31
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <specific device> - directs command to the device or emulator with
the given
serial number or qualifier. Overrides ANDROID_S
ERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --
iv <hex-encoded iv>] <file>
- push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
('--algo', '--key', and '--iv' mean the file is
encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device's
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
(<packages...> is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
-------------------------------------------------------------------------------
ERROR: failed to push some files, make sure you have enough free space then try
again. Press any key to exit
Quite obvious ol' chap, try freeing some space either on the computer or the phone.
Sorry if I am appearing a bit condescending to you.
I flash phone to 4.1.2 and root it and I format sd card. My computer is freshly after format so i have space on my phone and computer.
PS. Sorry for my english but I'm still learning the language because I'm from Poland kurwa mać!!
Ok make sure there are no other usb devices plugged into your computer at the same time, make sure you have full root, make sure you have busybox
Sent from my C2004 using xda app-developers app
I have full root for 100 % , To ports usb i have only connected mouse and keyboard. I installed busybox to do root but I uninstall when I finished rooting
ref
make sure you have full root access , i think that's the problem
Fikcyjny said:
I have full root for 100 %
Click to expand...
Click to collapse
Read this. I have full root, for example I uninstall systems apps (few at this same time) and I dont have restart
ref
adb isn't recognizing the push command and it's just displaying help instead. Which language are your OS? For debugging, open root.bat with notepad and remove the first line (@echo off), save and then run again. This time the console will show more details, copy all and post here so I can help...
Code:
C:\DOTELE~1\NICKIR~1>echo Pushing system.ext4 to (this process will take a whil
e)...
Pushing system.ext4 to (this process will take a while)...
C:\DOTELE~1\NICKIR~1>tools\adb.exe push system.ext4
Android Debug Bridge version 1.0.31
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <specific device> - directs command to the device or emulator with
the given
serial number or qualifier. Overrides ANDROID_S
ERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --
iv <hex-encoded iv>] <file>
- push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
('--algo', '--key', and '--iv' mean the file is
encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device's
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
(<packages...> is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
C:\DOTELE~1\NICKIR~1>if not 1 == 0 goto err_push
C:\DOTELE~1\NICKIR~1>echo ------------------------------------------------------
-------------------------
-------------------------------------------------------------------------------
C:\DOTELE~1\NICKIR~1>echo ERROR: failed to push some files, make sure you have e
nough free space then try again. Press any key to exit
ERROR: failed to push some files, make sure you have enough free space then try
again. Press any key to exit
C:\DOTELE~1\NICKIR~1>pause 1>nul
Language is Polish .
That's really weird, your command prompt is using paths in DOS style, which Windows version are you using? Meanwhile, try extracting the root tool in C:\ and rename the folder from "NickiRoot" to something very small, like "NR", then try again and see if works...
Make sure that other adb processes are not running. Like an android emulator...
Sometimes I have weird errors because I have installed BlueStacks.
Rename folder didn't work. I have Windows XP Proffessional
WOW, it's time to upgrade your OS (even Microsoft ended its support). If you're using NickiRoot 1.1 or newer, that's your problem. To cleanup my code I dropped a ugly workaround and the script won't work in Windows XP anymore. The last version compatible with it is NickiRoot 1.0.1, anything newer won't work in Windows XP and there's no reason I should care in supporting it anymore
I have same problem..
I'm using windows xp ..
Hello
I'm having problems following the post [BOOTLOADER] 2nd-Bootloader/Recovery unlock process for KFire 2 [TWRP 2.6.3.0]
I tried several ways during several days but I'm totally stuck, I don't know what i should do more. My KF is 10.5.0, from 2012, not HD, without camera, so I'm sure that is KF2, second generation. And I'm working with Mac OSx.
Here what i did;
STEP 1. Backup your stock partitions to your own HD for later if you need disaster recovery >>> i cannot make it
myname-MacBook-Pro:~ myname$ adb pull /dev/block/mmcblk0boot0 failed to copy '/dev/block/mmcblk0boot0' to './mmcblk0boot0': Permission denied
So i didn't make backup and go direct to STEP 2 and 3.
I placed all the files on my device in the sdcard area.
STEP 3. Install the stack override in /system: It looked it worked, i used factory cable;
myname-MacBook-Pro:~ myname$ adb push stack/download
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
Silvia-Kozakura-no-MacBook-Pro:~ silviakozakura$ adb shell su -c "dd if=/sdcard/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"
And then the STEP 4, where I'm stuck "Flash the OLD bootloader, new otter2-freedom-boot.img and TWRP recovery" I used factory cable to enter in Fastboot mode but always i get this error;
myname-MacBook-Pro:~ myname$ fastboot -i 0x1949 flash bootloader otter2-u-boot-prod-10.2.4.bin
error: cannot load 'otter2-u-boot-prod-10.2.4.bin'
- Cannot load any file, I put all the files at sdcard/download, I don't know what i did wrong.
I'm willing to pay money to who will help me.
KindleRooteado said:
Hello
I'm having problems following the post [BOOTLOADER] 2nd-Bootloader/Recovery unlock process for KFire 2 [TWRP 2.6.3.0]
I tried several ways during several days but I'm totally stuck, I don't know what i should do more. My KF is 10.5.0, from 2012, not HD, without camera, so I'm sure that is KF2, second generation. And I'm working with Mac OSx.
Here what i did;
STEP 1. Backup your stock partitions to your own HD for later if you need disaster recovery >>> i cannot make it
myname-MacBook-Pro:~ myname$ adb pull /dev/block/mmcblk0boot0 failed to copy '/dev/block/mmcblk0boot0' to './mmcblk0boot0': Permission denied
So i didn't make backup and go direct to STEP 2 and 3.
I placed all the files on my device in the sdcard area.
STEP 3. Install the stack override in /system: It looked it worked, i used factory cable;
myname-MacBook-Pro:~ myname$ adb push stack/download
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
Silvia-Kozakura-no-MacBook-Pro:~ silviakozakura$ adb shell su -c "dd if=/sdcard/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"
And then the STEP 4, where I'm stuck "Flash the OLD bootloader, new otter2-freedom-boot.img and TWRP recovery" I used factory cable to enter in Fastboot mode but always i get this error;
myname-MacBook-Pro:~ myname$ fastboot -i 0x1949 flash bootloader otter2-u-boot-prod-10.2.4.bin
error: cannot load 'otter2-u-boot-prod-10.2.4.bin'
- Cannot load any file, I put all the files at sdcard/download, I don't know what i did wrong.
I'm willing to pay money to who will help me.
Click to expand...
Click to collapse
You have to keep the files on your PC, not the Kindle. Execute the commands from where you kept the files. I'll write you a full tutorial when I have time.
Sent from my device running CyanogenMod 11
SafinWasi said:
You have to keep the files on your PC, not the Kindle. Execute the commands from where you kept the files. I'll write you a full tutorial when I have time.
Sent from my device running CyanogenMod 11
Click to expand...
Click to collapse
That makes sense, thank you! I will try
Well, now I don't understand anything, I'm making the same i did yestarday but without the same results, with different errors.
I've relocated the factory settings in KF and I checked if the root is ok.
So now says;
STEP 1. Backup
myname-no-MacBook-Pro:~ myname$ adb pull /dev/block/mmcblk0boot0
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
STEP 3. Install the stack override in /system
myname-no-MacBook-Pro:~ myname$ adb push stack/download
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
myname-no-MacBook-Pro:~ myname$ adb shell su -c "dd if=/sdcard/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"error: device not found
myname-no-MacBook-Pro:~ myname$ adb shell su -c "dd if=/download/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"
error: device not found
myname-no-MacBook-Pro:~ myname$ adb shell su -c "dd if=/download/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"
error: device not found
I tryed to run "stack" placed on sdcard of the device and placed on my computer, nothing worked.
I think is better don't do anything else, i will wait for help...
KindleRooteado said:
Well, now I don't understand anything, I'm making the same i did yestarday but without the same results, with different errors.
I've relocated the factory settings in KF and I checked if the root is ok.
So now says;
(post edited due to large size_
I tryed to run "stack" placed on sdcard of the device and placed on my computer, nothing worked.
I think is better don't do anything else, i will wait for help...
Click to expand...
Click to collapse
Okay,first off,download the files to your PC,not the Kindle. Connect the Kindle to your PC with USB debugging enabled. Then,open a command window and cd to the directory where you kept the files.
Now issue the following commands to backup partitions:
Code:
adb pull /dev/block/mmcblk0boot0
adb pull /dev/block/platform/omap/omap_hsmmc.1/by-name/boot
adb pull /dev/block/platform/omap/omap_hsmmc.1/by-name/recovery
adb pull /dev/block/platform/omap/omap_hsmmc.1/by-name/system
Note:If you get "permission denied" error,use the following command:
Code:
adb remount
If you still get the error,ensure that you have root.
Next,install the stack override:
Code:
adb push stack /sdcard/
adb shell su -c "dd if=/sdcard/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"
And flash the old bootloader with 2nd bootloader and Team Win Recovery: (use factory cable to boot into fastboot)
Code:
fastboot -i 0x1949 flash bootloader otter2-u-boot-prod-10.2.4.bin
fastboot -i 0x1949 flash boot otter2-freedom-boot-10.4.6.img
fastboot -i 0x1949 flash recovery otter2-twrp-2.6.3.0-recovery.img
fastboot -i 0x1949 reboot
SafinWasi said:
Okay,first off,download the files to your PC,not the Kindle. Connect the Kindle to your PC with USB debugging enabled. Then,open a command window and cd to the directory where you kept the files.
Now issue the following commands to backup partitions:
Code:
adb pull /dev/block/mmcblk0boot0
adb pull /dev/block/platform/omap/omap_hsmmc.1/by-name/boot
adb pull /dev/block/platform/omap/omap_hsmmc.1/by-name/recovery
adb pull /dev/block/platform/omap/omap_hsmmc.1/by-name/system
Note:If you get "permission denied" error,use the following command:
Code:
adb remount
If you still get the error,ensure that you have root.
Next,install the stack override:
Code:
adb push stack /sdcard/
adb shell su -c "dd if=/sdcard/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"
And flash the old bootloader with 2nd bootloader and Team Win Recovery: (use factory cable to boot into fastboot)
Code:
fastboot -i 0x1949 flash bootloader otter2-u-boot-prod-10.2.4.bin
fastboot -i 0x1949 flash boot otter2-freedom-boot-10.4.6.img
fastboot -i 0x1949 flash recovery otter2-twrp-2.6.3.0-recovery.img
fastboot -i 0x1949 reboot
Click to expand...
Click to collapse
Hello, I really appreciate your help. I followed your instructions but I'm still stuck... I got:
Permission denied
remount failed: Operation not permitted
And Superuser is enabled for sure.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you try mounting system from ES file explorer?
Sent from my device running CyanogenMod 11
SafinWasi said:
Can you try mounting system from ES file explorer?
Sent from my device running CyanogenMod 11
Click to expand...
Click to collapse
thanks, i will do tomorrow
Still doesn't work... I mounted system with ES file explorer and after I tried again to do the backup:
Code:
Last login: Sat Sep 6 09:24:20 on console
myname-no-MacBook-Pro:~ myname$ cd desktop
myname-no-MacBook-Pro:desktop myname$ adb pull /dev/block/mmcblk0boot0
failed to copy '/dev/block/mmcblk0boot0' to './mmcblk0boot0': Permission denied
myname-no-MacBook-Pro:desktop myname$ ./adb pull /dev/block/mmcblk0boot0
-bash: ./adb: No such file or directory
myname-no-MacBook-Pro:desktop myname$ adb remount
remount failed: Operation not permitted
myname-no-MacBook-Pro:desktop myname$ ./adb remount
-bash: ./adb: No such file or directory
myname-no-MacBook-Pro:desktop myname$
KindleRooteado said:
Still doesn't work... I mounted system with ES file explorer and after I tried again to do the backup:
Code:
Last login: Sat Sep 6 09:24:20 on console
myname-no-MacBook-Pro:~ myname$ cd desktop
myname-no-MacBook-Pro:desktop myname$ adb pull /dev/block/mmcblk0boot0
failed to copy '/dev/block/mmcblk0boot0' to './mmcblk0boot0': Permission denied
myname-no-MacBook-Pro:desktop myname$ ./adb pull /dev/block/mmcblk0boot0
-bash: ./adb: No such file or directory
myname-no-MacBook-Pro:desktop myname$ adb remount
remount failed: Operation not permitted
myname-no-MacBook-Pro:desktop myname$ ./adb remount
-bash: ./adb: No such file or directory
myname-no-MacBook-Pro:desktop myname$
Click to expand...
Click to collapse
Ok,try running "adb root" and then issue the commands
I think where can be my mistake. When I installed the android sdk adb I never got the list of my devices, my KF2 didn't appear, but i didn't think that was so important...
Then i thought that i didn't need to do anything else to connect the Kindle to my computer with USB debugging enabled, sorry. Now I'm trying to do USB debugging enabled following this guide: https://developer.amazon.com/appsan...etting-up-your-kindle-fire-tablet-for-testing
And again I'm stuck. I don't understand the meaning of this errors, any idea? I'm working with mac OSX, no Windows PC available in 10.424 Km...
Code:
myname-no-MacBook-Pro:SDK tools myname$
myname-no-MacBook-Pro:SDK tools myname$ ./android update adb
Unable to access jarfile /Users/myname/desktop/SDK tools/archquery.jar
Unable to access jarfile /Users/myname/desktop/SDK tools/archquery.jar
Exception in thread "Thread-1" java.lang.NoClassDefFoundError: com/android/utils/ILogger
Caused by: java.lang.ClassNotFoundException: com.android.utils.ILogger
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
SafinWasi said:
Ok,try running "adb root" and then issue the commands
Click to expand...
Click to collapse
I'm a really pain, sorry.
I guest i cannot run any adb command until l fix the USB debugging enabled.
Code:
myname-no-MacBook-Pro:desktop myname$ adb root
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
adbd cannot run as root in production builds
I think i finally enabled USB debugging, but I'm not sure. I have made my device appears in the list, but the other .adb commands are not working still. The fact that my device appears in the list is a good sign or not?
Code:
myname-no-MacBook-Pro:desktop myname$ adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
D026A0A02494022P device
myname-no-MacBook-Pro:desktop myname$ adb pull /dev/block/mmcblk0boot0
failed to copy '/dev/block/mmcblk0boot0' to './mmcblk0boot0': Permission denied
myname-no-MacBook-Pro:desktop myname$ adb remount
remount failed: Operation not permitted
myname-no-MacBook-Pro:desktop myname$ adb root
adbd cannot run as root in production builds
myname-no-MacBook-Pro:desktop myname$
KindleRooteado said:
I think i finally enabled USB debugging, but I'm not sure. I have made my device appears in the list, but the other .adb commands are not working still. The fact that my device appears in the list is a good sign or not?
Code:
myname-no-MacBook-Pro:desktop myname$ adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
D026A0A02494022Pdevice
myname-no-MacBook-Pro:desktop myname$ adb pull /dev/block/mmcblk0boot0
failed to copy '/dev/block/mmcblk0boot0' to './mmcblk0boot0': Permission denied
myname-no-MacBook-Pro:desktop myname$ adb remount
remount failed: Operation not permitted
myname-no-MacBook-Pro:desktop myname$ adb root
adbd cannot run as root in production builds
myname-no-MacBook-Pro:desktop myname$
Click to expand...
Click to collapse
Its definitely a good sign. I'll keep digging.
Sent from my device running CyanogenMod 11
---------- Post added at 08:43 PM ---------- Previous post was at 08:39 PM ----------
OK,found something. Try this:
Code:
adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.IMG"
adb pull /Edvard/boot0block.IMG
Try this with other commands as well. And if it prompts SuperSU,say grant.
Sent from my device running CyanogenMod 11
SafinWasi said:
Its definitely a good sign. I'll keep digging.
Sent from my device running CyanogenMod 11
---------- Post added at 08:43 PM ---------- Previous post was at 08:39 PM ----------
OK,found something. Try this:
Code:
adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.IMG"
adb pull /Edvard/boot0block.IMG
Try this with other commands as well. And if it prompts SuperSU,say grant.
Sent from my device running CyanogenMod 11
Click to expand...
Click to collapse
Thank you very much again. The first command works, it asked me to grant SuperSu and i did, but nothing else.
Is Edvard/boot0block.IMG a file i have to download?
Code:
myname-no-MacBook-Pro:~ myname$ cd desktop
myname-no-MacBook-Pro:desktop myname$ adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.IMG"
4096+0 records in
4096+0 records out
2097152 bytes transferred in 0.459 secs (4568958 bytes/sec)
myname-no-MacBook-Pro:desktop myname$ adb pull /Edvard/boot0block.IMG
[B]remote object '/Edvard/boot0block.IMG' does not exist
[/B]myname-no-MacBook-Pro:desktop myname$ adb pull /dev/block/mmcblk0boot0
failed to copy '/dev/block/mmcblk0boot0' to './mmcblk0boot0': Permission denied
myname-no-MacBook-Pro:desktop myname$
Why it's so complicated?
KindleRooteado said:
Thank you very much again. The first command works, it asked me to grant SuperSu and i did, but nothing else.
Is Edvard/boot0block.IMG a file i have to download?
Code:
myname-no-MacBook-Pro:~ myname$ cd desktop
myname-no-MacBook-Pro:desktop myname$ adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.IMG"
4096+0 records in
4096+0 records out
2097152 bytes transferred in 0.459 secs (4568958 bytes/sec)
myname-no-MacBook-Pro:desktop myname$ adb pull /Edvard/boot0block.IMG
[B]remote object '/Edvard/boot0block.IMG' does not exist
[/B]myname-no-MacBook-Pro:desktop myname$ adb pull /dev/block/mmcblk0boot0
failed to copy '/dev/block/mmcblk0boot0' to './mmcblk0boot0': Permission denied
myname-no-MacBook-Pro:desktop myname$
Why it's so complicated?
Click to expand...
Click to collapse
Lol,it should be:
adb pull /sdcard/boot0block.img
SafinWasi said:
Lol,it should be:
adb pull /sdcard/boot0block.img
Click to expand...
Click to collapse
Lol, I am about to give up.
The last command that you give me worked but again I couldn't make backup, cause i got the same error.
Silvia-Kozakura-no-MacBook-Pro:~ silviakozakura$ adb pull /sdcard/boot0block.img6366 KB/s (2097152 bytes in 0.321s)
So, i had the brilliant idea to skip that step and go ahead to install the stack and then to flash bootloader.
And now I'm stuck at the second command, my computer is sending 'boot' for 40 minutes, not sure if this is normal, but i suppose it is not...
I'm going to sleep, tomorrow i will see what to do or not. Thanks for your time.
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ adb pull /sdcard/boot0block.img
6245 KB/s (2097152 bytes in 0.327s)
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ adb pull /dev/block/mmcblk0boot0
failed to copy '/dev/block/mmcblk0boot0' to './mmcblk0boot0': Permission denied
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ adb push stack /sdcard/
204 KB/s (4096 bytes in 0.019s)
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ adb shell su -c "dd if=/sdcard/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"
0+1 records in
0+1 records out
4096 bytes transferred in 0.002 secs (2048000 bytes/sec)
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ fastboot -i 0x1949 flash bootloader otter2-u-boot-prod-10.2.4.bin
sending 'bootloader' (227 KB)...
OKAY [ 0.129s]
writing 'bootloader'...
OKAY [ 0.057s]
finished. total time: 0.186s
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ fastboot -i 0x1949 flash boot otter2-freedom-boot-10.4.6.img
sending 'boot' (8153 KB)...
KindleRooteado said:
Lol, I am about to give up.
The last command that you give me worked but again I couldn't make backup, cause i got the same error.
Silvia-Kozakura-no-MacBook-Pro:~ silviakozakura$ adb pull /sdcard/boot0block.img6366 KB/s (2097152 bytes in 0.321s)
So, i had the brilliant idea to skip that step and go ahead to install the stack and then to flash bootloader.
And now I'm stuck at the second command, my computer is sending 'boot' for 40 minutes, not sure if this is normal, but i suppose it is not...
I'm going to sleep, tomorrow i will see what to do or not. Thanks for your time.
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ adb pull /sdcard/boot0block.img
6245 KB/s (2097152 bytes in 0.327s)
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ adb pull /dev/block/mmcblk0boot0
failed to copy '/dev/block/mmcblk0boot0' to './mmcblk0boot0': Permission denied
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ adb push stack /sdcard/
204 KB/s (4096 bytes in 0.019s)
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ adb shell su -c "dd if=/sdcard/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"
0+1 records in
0+1 records out
4096 bytes transferred in 0.002 secs (2048000 bytes/sec)
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ fastboot -i 0x1949 flash bootloader otter2-u-boot-prod-10.2.4.bin
sending 'bootloader' (227 KB)...
OKAY [ 0.129s]
writing 'bootloader'...
OKAY [ 0.057s]
finished. total time: 0.186s
Silvia-Kozakura-no-MacBook-Pro:desktop silviakozakura$ fastboot -i 0x1949 flash boot otter2-freedom-boot-10.4.6.img
sending 'boot' (8153 KB)...
Click to expand...
Click to collapse
What the… it should not ta take more than 10 seconds
Sent from my device running CyanogenMod 11
Hi, i was trying to to restore my kindle to 10.2.3 firmware cause i was told that it was the only way to flash a new rom and something didn't work.
Now shows this red triangle all the time. I cannot reboot, restore and my computer doesn't recognizes it.
Please help me, what i can do.
(It can enter to fastboot)