Develop Bugs

A2DP - Automatic Stereo Audio

I have searched around XDA and haven't found a solution to this yet.
I have a wireless transmitter to play music in my car. When I turn bluetooth on it automatically turns on 'Hands-Free' but doesn't turn on 'Stereo Audio'.
Previously on my Kaiser (with a different car kit) turning on the transmitter set it up automatically.
I have tried AutoA2DP (from http://forum.xda-developers.com/showthread.php?t=530932) but I'm not sure it worked - it certainly hasn't achieved the effect I want (although it does seem to open Media Player when I connect now).
Anyone found a solution on the TP2?
Cheers,

I did have take a quick look at my TP2, because I had no problem with the connection. My car radio (Sony Xplod) gives 2 icons... 1 from the hands-free and the other of my Audio. I've looked in my settings for you, and found one option what must be checked. It's something like: Make a seperate connection for handfree and audio! (I'm guissing to that sentence becuase I have a dutch ROM!)
Hope it helped you!
greetz
EDIT:
Just did take a closer look into my car, and now it also didn't take the extra connection with my sterio audio. This is the solution:
Go to Com Manager
Press Setting
Press Bluetooth
Take the second tab
And tap than Sterio Audio
Now He's saying he's trying to make a connection e voila! Now it's playing music true your car audio!
(This is the way with TF3D2!'

rolfie23 said:
I did have take a quick look at my TP2, because I had no problem with the connection. My car radio (Sony Xplod) gives 2 icons... 1 from the hands-free and the other of my Audio. I've looked in my settings for you, and found one option what must be checked. It's something like: Make a seperate connection for handfree and audio! (I'm guissing to that sentence becuase I have a dutch ROM!)
Hope it helped you!
greetz
EDIT:
Just did take a closer look into my car, and now it also didn't take the extra connection with my sterio audio. This is the solution:
Go to Com Manager
Press Setting
Press Bluetooth
Take the second tab
And tap than Sterio Audio
Now He's saying he's trying to make a connection e voila! Now it's playing music true your car audio!
(This is the way with TF3D2!'
Click to expand...
Click to collapse
Yes - I've been doing this every time I get in my car - I just wish there was a way of doing it automatically (and then preventing the message 'You can't control audio via this headset' or similar).
Cheers,
Jim.

Hi,
Same problem in my car. Same car radio working with two (Sony Ericsson) phones I used before. They always connected immediately (both 'Hands-Free' + 'Stereo Audio). Strange that the TP2 is not comfortable with this simple task. Indeed, I think the option "Connect separately to Bluetooth hands-free and stereo audio services" should be unchecked but despite this option, the TP2 is still waiting for the appropriate tap. Going to BT settings and tapping 'Stereo Audio' each and every time is frustrating and uncomfortable.

Added subscription to this topic.
I'm a bit frustrated too with the AD2P auto connect problem.
I have a Sony MEX-BT3700U Car radio.
When I sit in my car, the handsfree function connects automatically with no hassle.
But not the Stereo Audio (A2DP) function. I connect it via the Bluetooth settings. After that it works great.
The problem is I'm always focused to activate AD2P manually first before I drive and forget that I have yet to start the car. So I have to start over. Going to settings > Bluetooth Settings etc. etc. ANNOYING!
So. I tried A2DP Toggle in combination with A2DP Auto Connect. Doesn't work.
Went searching for hours... But nothing. Think it has todo with the different BT Stack compared to other HTC's.
Still hoping for a solution.

@Ramsfan_Jim: which wireless transmitter are you using? I'm thinking of buying one to use w/my TP2. My factory head unit (VW Monsoon) doesn't support bluetooth.

t-readyroc said:
@Ramsfan_Jim: which wireless transmitter are you using? I'm thinking of buying one to use w/my TP2. My factory head unit (VW Monsoon) doesn't support bluetooth.
Click to expand...
Click to collapse
I originally used a Venturi Mini - which had the advantage that it automatically set up handsfree & audio transmission as soon as I turned it on, but unfortunately it broke (repeatedly) with regular use.
I now use this one http://cgi.ebay.co.uk/Car-MP3-FM-Transmitter-Bluetooth-Handfree-w-2-Remotes_W0QQitemZ250445424484QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item3a4fb5e764&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A6%7C72%3A1683%7C293%3A7%7C294%3A25 which is much sturdier - and seems to have a stronger signal. However, I have to change the bluetooth settings on the TP2 to enable Stereo Audio each time I connect.
Warning - this is a much bigger device, so dependent on where your cigarette lighter is in the car, it may get in the way. I had to buy an extension lead to move it so I could use the gearstick!

Newsflash.
Found out how to auto connect to my bluetooth car radio with my TP2.
I have a radio channel bar (or whatever it's called in english) from one to six. There's a "pause/play" description small above the number five. I accidentally pressed it and it suddenly connected my phone through AD2P.
So just press play and it gets connected. So no software needed for me.

I don't use a BT car radio but I do have a stereo BT and a regular BT headset. The stereo BT has both Handsfree and A2DP profiles. But since I use the A2DP only, in my Kaiser under BT Services I unchecked the Handsfree profile and now my stereo BT autoconnects every time.

ChriX84: thanx, very interesting information, will try it tonight in my car !
Another interesting info (might be useful in terms of a .cab file preparation...): a "BT Mono" (i.e. not Stereo Audio (A2DP)) with a very low volume signal is obtained (in my car radio at least) when pressing the "Play" button on the media player (Core or WMP) while still having Stereo Audio option switched off under the BT settings.

lacsusz said:
ChriX84: thanx, very interesting information, will try it tonight in my car !
Another interesting info (might be useful in terms of a .cab file preparation...): a "BT Mono" (i.e. not Stereo Audio (A2DP)) with a very low volume signal is obtained (in my car radio at least) when pressing the "Play" button on the media player (Core or WMP) while still having Stereo Audio option switched off under the BT settings.
Click to expand...
Click to collapse
I am searching a solution too.
When A2DP isnt active but Headset is connected then you will always listen mono music in your headset...Its normal
Dani

ChriX84 said:
Newsflash.
I have a radio channel bar (or whatever it's called in english) from one to six. There's a "pause/play" description small above the number five. I accidentally pressed it and it suddenly connected my phone through AD2P.
Click to expand...
Click to collapse
This worked for me too. Was bugging me to the extent where I wasn't bothering streaming audio any more!
Nice tip

I always burned new mp3 cd's or connected my mp3player/phone through a aux-cable.
Bluetooth Stereo Music is a huge step forward for me. The ease of using one device for everything. Calling, playing music without any cables. Thank god for that invention.

brynweb said:
This worked for me too. Was bugging me to the extent where I wasn't bothering streaming audio any more!
Nice tip
Click to expand...
Click to collapse
What exactly is a radio channel bar? Do you mean like a media widget or radio widget?
Personally this a2dp bug is a deal breaker for me. I primarily use my device for audio streaming.

capncark said:
What exactly is a radio channel bar? Do you mean like a media widget or radio widget?
Personally this a2dp bug is a deal breaker for me. I primarily use my device for audio streaming.
Click to expand...
Click to collapse
Yeah where can you find this?
Regards,
Zar

The bar with all the channel buttons. 1,2,3,4,5 etc.
Above or under those buttons there are little symbols with play/pause etc.

Problem with Windows Mobile and Bluetooth Headset Playing Audio

Hello guys,
I just got a Sony bluetooth headset and I am trying to use it with my HTC TYTN II. At first I paired the phone and the headset and I was able to listen to music and talk through the headset, all perfect. When I was listening to music, the bluetooth icon on my phone represented a music note and a headset over it.
When I turn the headset off once and then on again, it connects automatically with the phone but in some other mode. The bluetooth icon now represents the bluetooth sign with a headset over it. Now when I listen to some music, it comes from the speaker of the phone, not from the bluetooth headset. Talking through it is not a problem.
If I pair the phone and the headset again, it works just fine (showing again the music note) but once I turn the headset off and on again, I lose the music mode.
Does anyone know how to fix that? Thanks in advance.

I fixed the issue by installing AutoA2DP (found in this forum).

I've had a similar problem on my Tilt. I originally posted the following on the ROM thread. Since then, I have found that the AutoA2DP has not fixed the problem. I still have this issue about 70% of the time, and sometimes I can't get the bluetooth to work at all, not even after a soft reset. Sometimes it seems as if the bluetooth has no power, the phone can't communicate with the headset except when within a few inches of one another. Then it magically seems to resolve itself. Anyway here's my original post from the ROM thread.
The other day I installed an app on my phone called Schaps Network Plugin, which allows you to map network drives to the phone the same way you can do with a desktop. It allows me to access the home network directly via my wifi. It was something I needed and it seemed to work great, for a day. The next day my bluetooth headset would not connect. Long story only slightly shorter, it seems the problem was with the headset connecting via A2DP and doing so automatically. This always worked just fine in the past. Suddenly it wouldn't work. I tried a ton of things including a "fresh" install of everything and formatting my memory card to start with nothing on it. I flashed the original rom and then flashed this rom. I did hard resets each time. Did this twice. Even tried the bluetooth in the oem rom to see if I still got the problem. I did, and it is still with me. I can manually get the headset to connect via A2DP using the bluetooth settings, though even then it may take reconnecting several times to get it to work. However, when I turn the headset off and then on again, the A2DP does not reconnect, just the hands free. But the sound is not routed through the phone's speaker either, at that point. In fact you often get no sound at all, nothing via the headset or the speaker. OTOH, if you activate Voice Command, the headset does work while Voice command is running. After it shuts off, you are back to no sound. It seems as if the hands free works fine, but the audio gets partly routed to A2DP but does not connect to the headset. If I reset the phone, the headset connects correctly and efverything works until I turn the headset off again. Also if I pair the headset again, everything works correctly until I turn the headset off. Though pairing is not as trouble free as it used to be either. Sometimes it will not pair up wihtout repeated attempts. I did find this program, AutoA2DP which has patched the problem. It detects when a paired bluetooth device connects, and forces a connection via A2DP as well. But I never had this issue in the past, and my wife's phone still has no problem. I am not sure the Schaps Network plugin had anything to do with it, other than the timing. Seems odd to me that the bluetooth stack would suddenly develop issues that persist even after two fresh flashes of the rom. Any ideas, suggesitons, etc.? This is really bugging me, and although the patch seems to be working, the phone is still not acting "right." In the past, and on my wife's phone, if a bluetooth headset is turned on, it automatically connects, and all sounds, including the system sounds, are routed through the headset. Now, sometimes they are, and sometimes they aren't.

Bluetooth headset question

Has anyone else paired a headset to their slide and had media audio come through it?
I paired my old jawbone2 to my slide and when I was playing a game, game audio came through the ear piece. It only happened ONCE and now everything (except calls and the genius button) is back to the phone speaker.
Is that normal? Should audio be routed through my BT Headset like that? I was pretty certain only calls should go through to a non a2dp device.

I don't know anything about the jawbone2, but I have no problems. For regular phone use, I have a Motorola H500 and I always play Pandora in the car, and have never had music come through the H500, just voice like it should be. (I've used the H500 on the G1 I ordered on launch day, on a Motorola Droid, a Sprint EVO 4G, and the 3G Slide on a variety of stock and non-stock ROMs.) I also have a Motorola S9 A2DP headset, and the audio works as you would expect on it also on all of those devices. Maybe the Slide detects the Jawbone2 in a funky way somehow. What does it say when you go to Settings->Wireless & Networks->Bluetooth Settings->Jawbone2 (press & hold then select options.) If it's not a A2DP headset, it should just say "Phone, Use for phone audio." An A2DP headset will also say "Media, use for media audio." If you are lucky, the phone is just detecting it wrong and you can uncheck the Media option.

It only did it once and then went back to acting like a normal BT headset.
I am going to chalk it up as a fluke from initial pairing.
And under options it says phone audio only which is ok.
I'm replacing it with a Jawbone Icon tomorrow which supports a2dp and a whole slew of other nifty features for a single ear headset.

Don't deal with much bluetooth headsets but i do hook it up to my car stereo and i know there are settings in the bluetooth of that specific device. have you had a chance to look in there?

Bluetooth Pairing problems
I have similar problems when pairing to my truck stereo. It auto pairs when I get into the truck and works perfectly well the first time I make a call. But after that it doesnt disconnect properly AND it will disconnect but will stay paired.
I am able to go into BT setting and have it reconnect.
Works once then bam not connected again.
I have Android version 2.3.3
Baseband 47.3201.35.06U_7.07.35.025
Kernel 2.6.32.17 -Cyanogenmod-g501281a
Mem Info
183MB /418MB
Build GRI40
Connecting to a Kenwood Receiver
DNX9140
It worked fine for my Nexus Not sure why this is happening.
Thanks

Anyone having probs with Bluetooth headphones?

I use bluetooth Heahphones on my s3 and it worked perfectly, paired and i get beautiful sound. But on my s4 i paired my bluetooth headphones with my phone and it synced great. But when i play Google music, it plays it outloud and not through the blue tooth headphones?? im really confused about this??? anyone have any solutions??
ty very much!!

bump

I'm waiting to get an S4 until I can purchase in store at Best Buy but I do have a set of Jaybirds I can test with them after I buy the phone.
Which BT headphones are you using?

movieaddict said:
I use bluetooth Heahphones on my s3 and it worked perfectly, paired and i get beautiful sound. But on my s4 i paired my bluetooth headphones with my phone and it synced great. But when i play Google music, it plays it outloud and not through the blue tooth headphones?? im really confused about this??? anyone have any solutions??
ty very much!!
Click to expand...
Click to collapse
I have a pair of LG-TONE HBS-730 earphones and also a FM transmitter in my car. Last night and this morning I had a similar problem as yours, and I had to restart the phone so I could hear music and calls through the bluetooth devices. A couple of hours ago, I tried again and everything worked very well, BUT after disconnecting them, the phone went like it was on Silent Mode. No sound at all, no ringtone, no music, even the alarm didn't emit any sound, so I had to restart the phone and sound got back to normal. At this moment I am doing some tests connecting and disconnecting the BT earphones, but the problem is gone, so I don't know what's going on.

pilot_xphile said:
I have a pair of LG-TONE HBS-730 earphones and also a FM transmitter in my car. Last night and this morning I had a similar problem as yours, and I had to restart the phone so I could hear music and calls through the bluetooth devices. A couple of hours ago, I tried again and everything worked very well, BUT after disconnecting them, the phone went like it was on Silent Mode. No sound at all, no ringtone, no music, even the alarm didn't emit any sound, so I had to restart the phone and sound got back to normal. At this moment I am doing some tests connecting and disconnecting the BT earphones, but the problem is gone, so I don't know what's going on.
Click to expand...
Click to collapse
On my s3 it paired automatically! on the s4 i had to do this.....
With the Power off, press the CALL button and move the power switch to the ‘ON’ side at the same time for 4 seconds to manually place the headset in pairing mode
I hope this helps!

Use BT all the time on my gs2 ill try this out tomorrow and see if there is anything out of the ordinary.
Needing to pair the bt device to the phone is very normal for the very first use - especially if its been paired with another device in its history. Ive found bt devices (headsets like the jabara bt3030/street2) often cant really have more than 1 or two pairs total or they dont connect / dont stay connected properly.
Also the samsung bt stack has had lots of issues with BT devices over the galaxy generations. hopefully its not back.

I've used a Moto S10 & S11 HD stereo BT and 2 different Jawbones without issue.

[Q] Bluetooth works with calls but not media audio

I have looked through 16 pages and have not found a solution.
My day old verizon G3 works with phone calls, but thats it. Audio wont play with videos or music when paired with bluetooth headphones
I have tried google play music and power amp.
I have rebooted the phone several times.
switched from dalvik and ART.
I have paired and Unpaired.
Tried every setting I can think of.
The Bluetooth headphones are Motorola S11 HD
They work fine on my computer, tablet, G2, note 3
any suggestions are greatly appreciated
Thank you in advance

jpimaging817 said:
I have looked through 16 pages and have not found a solution.
My day old verizon G3 works with phone calls, but thats it. Audio wont play with videos or music when paired with bluetooth headphones
I have tried google play music and power amp.
I have rebooted the phone several times.
switched from dalvik and ART.
I have paired and Unpaired.
Tried every setting I can think of.
The Bluetooth headphones are Motorola S11 HD
They work fine on my computer, tablet, G2, note 3
any suggestions are greatly appreciated
Thank you in advance
Click to expand...
Click to collapse
I use mine everyday to stream music via bluetooth. Are you sure the media option under the bluetooth connection is enabled? What are you connecting to?

Similar issue
I too own a Verizon LG G3 that I purchased recently. I also have a pair of LG Tone Ultras that I am having trouble with. I mainly use them for music and the occasional call. I've found that when I turned off phone audio under Settings > Bluetooth, I'm able to listen to music, which is nice, but the control buttons on the Bluetooth headset don't work, which is a mediocre workaround. Since I've tried a hard reset with no luck, I'll be contacting lg because at the very least, their own peripheral should work with their phone.

smallrye said:
I too own a Verizon LG G3 that I purchased recently. I also have a pair of LG Tone Ultras that I am having trouble with. I mainly use them for music and the occasional call. I've found that when I turned off phone audio under Settings > Bluetooth, I'm able to listen to music, which is nice, but the control buttons on the Bluetooth headset don't work, which is a mediocre workaround. Since I've tried a hard reset with no luck, I'll be contacting lg because at the very least, their own peripheral should work with their phone.
Click to expand...
Click to collapse
I come from the philippines and i have the g3 also. my bluetooth connection was fine it connected to my car and headset but now it only receives calls but does not play music through my bluetooth headphones. when i press the play button on my headset it plays on the device itself. checked under bluetooth setting and call and media and audio was checked.
my device is rooted. i did a factory reset but the problem remains unfixed. please help.

Bump same issue here
Sent from my LG-D851 using Tapatalk

Didn't have any issues until a couple days ago, then the phone stopped playing music through bluetooth. Phone is set to allow media through blutooth for my car connection, my cat says the phone is connected as a phone and as an audio device. I dunno what went wrong. Occasionally I am able to get it to work again by resetting, but it stops working again after a while.

I've noticed this same behavior.
I found that if I go into the Bluetooth settings I can uncheck the "media" option for the device, then check it again, and it will work until the next time I connect. Not a graceful solution by any means, but it keeps me listening until something more useful comes up.
Eric

Simple Solution for Me, LG G3 Audio Streaming
Well I had this problem. I could make calls and they worked fine, voice and sound.
I could not get streaming media to play but I could see that the songs were registering on my car display.
I tried everything, the settings on the phone, re-pairing. etc. Nothing worked.
I just found out that it was a more simple problem. Somehow the bluetooth volume got turned down and all I did was turn it up while testing the problem on another car stereo. Maybe it'll work for you, just turn up the volume while attempting to stream music to your stereo on your LG G3. There are various volume settings on the phone for different things. I have no idea how the volume could have been turned down, that low. It takes holding it a few seconds of holding for the volume to go back up. I have not adjusted the volume on the phone in some time....so maybe it is bug, dunno. Maybe its just an easy accidental thing, turning down the volume. I never adjust the volume on the phone with the back buttons, too hard to get to. That is how I turned up the volume in this case, back button on the LG G3
This is not the solution I read about where you can call someone, turn up the volume then the media stream works. I guess these could be related but not what I did.

Same problem (not fixed)
I've got the same problem with my lg g3 and mpow Thor headphones, I need quick help please

It must be the phone cause it has the same problems with a JBL charge 3

yeah, same issue here. Bluetooth connects for call audio only. Running Marshmello 6.0.1

aakashn said:
yeah, same issue here. Bluetooth connects for call audio only. Running Marshmello 6.0.1
Click to expand...
Click to collapse
Everything works fine here, so it's not a general phone issue.
Does it properly recognise the bluetooth device as headphones/speakers?
Also I see a lot of you talk about car bluetooth. There are a lot of cars that don't actually support streaming media over Bluetooth (just voice calls since they are much lower quality).
There was a thread on the main XDA page a few says ago.

Hi Engmia,
When I initially get into the vehicle the car does recognize the device with headphones/mic symbol however if I go into my bluetooth settings and look at the profiles that are connected, only the "Call audio" profile is available. If I unpair the device and restart my phone, then re-pair the device it will eventually connect and using "call audio" and "media audio" profiles. I believe this is a Marshmellow issue as it's happening in both of my cars.
Thanks,
Aakash
engmia said:
Everything works fine here, so it's not a general phone issue.
Does it properly recognise the bluetooth device as headphones/speakers?
Also I see a lot of you talk about car bluetooth. There are a lot of cars that don't actually support streaming media over Bluetooth (just voice calls since they are much lower quality).
There was a thread on the main XDA page a few says ago.
Click to expand...
Click to collapse

aakashn said:
Hi Engmia,
When I initially get into the vehicle the car does recognize the device with headphones/mic symbol however if I go into my bluetooth settings and look at the profiles that are connected, only the "Call audio" profile is available. If I unpair the device and restart my phone, then re-pair the device it will eventually connect and using "call audio" and "media audio" profiles. I believe this is a Marshmellow issue as it's happening in both of my cars.
Thanks,
Aakash
Click to expand...
Click to collapse
Hello,
If you car actually has A2DP (the Bluetooth media standard for streaming media over bluetooth) which is supported by having the option enabled when reconnecting then it's a bug either in the car protocols or the phone software.
I can't help further unfortunately but recommend you to use the current workaround you've found and submit a proper bug report.
I think the rebooting of phone is an unnecessary step, try just unpairing the device or even better, just resetting the connection to see if it will work and save some time.
You can also try updating to 7.1.1, to see if the issue is resolved there.
Personally I've never experienced issues on neither 5.0, 6.0 or 7.0 with my bluetooth headphones. In dact I was always pleasently surprises by how well the pairing worked.

Thanks for the reply engmia. I know both vehicles support A2DP, and I do not have issues with a different device. Are the 7.1.1 roms all AOSP? Would they be okay to use as a daily driver?
Thanks!
engmia said:
Hello,
If you car actually has A2DP (the Bluetooth media standard for streaming media over bluetooth) which is supported by having the option enabled when reconnecting then it's a bug either in the car protocols or the phone software.
I can't help further unfortunately but recommend you to use the current workaround you've found and submit a proper bug report.
I think the rebooting of phone is an unnecessary step, try just unpairing the device or even better, just resetting the connection to see if it will work and save some time.
You can also try updating to 7.1.1, to see if the issue is resolved there.
Personally I've never experienced issues on neither 5.0, 6.0 or 7.0 with my bluetooth headphones. In dact I was always pleasently surprises by how well the pairing worked.
Click to expand...
Click to collapse

aakashn said:
Thanks for the reply engmia. I know both vehicles support A2DP, and I do not have issues with a different device. Are the 7.1.1 roms all AOSP? Would they be okay to use as a daily driver?
Thanks!
Click to expand...
Click to collapse
Yeah, you are looking for a custom AOSP rom for 7.0 since LG isn't planning to release the update.
It's absolutely lovely for a daily driver, works great and is quite good stability wise. Sometimes a new weekly (LineageOS) will have an unexpected bug, but that's why you just keep the previous version or a backup to keep everything running smoothly.
Going back to stock would be a pain for me at this point, both function and performance wise. I don't think you'll be missing anything from the stock rom, and most importantly, double tap to wake works.

problem seems to be syncing to multiple devices
Ran into this problem this morning.. I have an LG HBS900 headset paired to my LG G3 and my PC.. It looks like the PC's bluetooth set it up as a media device and the phone would only connect it for voice calls, no options for media showed up in the bluetooth settings on the phone..
To fix the problem:
I paired the headset to my PC and and then unpaired it and shut off bluetooth on my PC.
I also unpaired the headset from my phone, cleared the caches and rebooted.
After reboot I paired the headset to the phone and media options were available again..
Hope this helps

Just had this happen to me now ... Couple of restarts, syncing my headphones to a computer and back to my phone fixed it for some reason.

Same issue with the LG V20 Smartphone
SmartPhone: LG V20
Service Provider: AT&T
Android 7.0 (not rooted)
Kernel 3.18.31
Bluetooth Headset model: LG HBS730
Pairing is not a problem. It pairs quickly and connects both phone and media controls, however the media controls do not work. The buttons themselves are connected and working because when I press and hold any of the media buttons, I'll hear a quick double-beep. The buttons that do not work are the "play/pause" toggle, the "play next" and "play previous" buttons. The buttons that do work are the "volume up/down", the "answer/hangup" buttons.
I've tried some of the previously mentioned suggestions, like disable then re-enable controls and pretty much have done that will all the media controls in settings and within the applications.
The LG HBS730 worked perfectly for over a year with my previous phone, the Samsung G5 Active and works perfectly with my 2 Android tablets. The headset works fine.
The LG V20 bluetooth media controls also fail in the identical ways when the phone is connected to my Toyota Highlander's Bluetooth. The phone answers and hangs up properly, but the music will not pause or play until I hit the button on the phone. The controls do not function from the Highlanders audio controls on my console. This is also true with my Honda Link Bluetooth. Same exact symptoms. I have to use the phone to control the audio.
I have logging enabled on my phone if anyone knows how to get the logs off this LG, I would be happy to donate them to the cause of getting this fixed.
--Tom

tripleplay said:
SmartPhone: LG V20
Service Provider: AT&T
Android 7.0 (not rooted)
Kernel 3.18.31
Bluetooth Headset model: LG HBS730
Pairing is not a problem. It pairs quickly and connects both phone and media controls, however the media controls do not work. The buttons themselves are connected and working because when I press and hold any of the media buttons, I'll hear a quick double-beep. The buttons that do not work are the "play/pause" toggle, the "play next" and "play previous" buttons. The buttons that do work are the "volume up/down", the "answer/hangup" buttons.
I've tried some of the previously mentioned suggestions, like disable then re-enable controls and pretty much have done that will all the media controls in settings and within the applications.
The LG HBS730 worked perfectly for over a year with my previous phone, the Samsung G5 Active and works perfectly with my 2 Android tablets. The headset works fine.
The LG V20 bluetooth media controls also fail in the identical ways when the phone is connected to my Toyota Highlander's Bluetooth. The phone answers and hangs up properly, but the music will not pause or play until I hit the button on the phone. The controls do not function from the Highlanders audio controls on my console. This is also true with my Honda Link Bluetooth. Same exact symptoms. I have to use the phone to control the audio.
I have logging enabled on my phone if anyone knows how to get the logs off this LG, I would be happy to donate them to the cause of getting this fixed.
--Tom
Click to expand...
Click to collapse
Sorry logs don't help me since I'm not a developer. I don't experience any issues on my d855 running LineageOS 7.1.1 and AKG Y45BT headset.
Pairing, controls, music playback all work perfectly fine.
I suggest you try contacting LG if the headset's controls are working on other devices.