when i push the Off/screen off button, and want to start the screen again i get lines in my screen and then i have to pull the battery out:S But android works fine Does somebody have a pakkage witch doesn't got this problem? or just one that works fine ? or a fix
This is a symptom of wrong panel type, if you are using panel 2 try panel 3, if panel 3 use panel 2.
Panel 2 and 3 are almost the same, but there are differences, usually these show up when coming out of sleep mode.
zenity said:
This is a symptom of wrong panel type, if you are using panel 2 try panel 3, if panel 3 use panel 2.
Panel 2 and 3 are almost the same, but there are differences, usually these show up when coming out of sleep mode.
Click to expand...
Click to collapse
Welll how do i do that(A) i'm new to this stuf...
nickboygta said:
Welll how do i do that(A) i'm new to this stuf...
Click to expand...
Click to collapse
Whoot wel i found this in the defaukt-kaiser file 1=sony 2=topoly 3=topoly(probably just the same as 2) What do is need to change?
Ah, depends if you are running from SD or installed in NAND ( if you have to run Haret it's SD ).
If SD then you need to edit the Default.txt file in the same folder that haret.exe is in, look for the line 'board-htckaiser.panel_type=' and change the number there, if it's 2 change to 3, if it's 3 change to 2, save and run haret again
If you wiped WM and installed to NAND, then you will have to edit the NBH, this is best done using Loserskaters NBH editor, which you may already have, depending which kernel you are using, and where you got it.
nickboygta said:
Whoot wel i found this in the defaukt-kaiser file 1=sony 2=topoly 3=topoly(probably just the same as 2) What do is need to change?
Click to expand...
Click to collapse
wel 2 works fine buth the screen just looks un-sharp.... So lets try 1
Won't do any harm, however the sleep issues usually only affect panel 2 and 3, ( as it says, 'probably' the same as 2, it's almost, but not quite ).
i just switched from panel 2 to panel 3(nand), i was getting the lines on wakeup with 2, now i get white screen initially on wakeup. otherwise i can't really tell a difference. i did have to reboot on panel 2 this morning. does this sound like typical behavior?
Thank You, Zenity...
Really new to Android's World, looking to revive a very tired Vario III, I'm testing different versions of Eclair and Froyo.
Today I put on the VaniljEclair_RLS7c (1) and I got a couple of black screen when resuming from sleep...
I noticed a crappy display too (similar to low-color display). Now I set panel type 2 (I don't know why in default-kaiser.txt, board-htckaiser.panel_type was set to 1) and the display gets very clear...
When the device wakes up, I see black and white noise for a while, then the display is drawn and - it seems - everything goes well.
Thank you again, Pino
My symptom is show command lines when wake up, but it is back to normal after a few seconds. I am planning switch from panel 3 to 2 for testing.
Is there anyway the White Screen can change to Black? or some image?
Related
I know some of you can make a button shortcut to change the screen to landscape, however I dont have this and I know u can add it in the registry... can anyone point out where?
Thnx
RegKey is:
HKLM\System\GDI\Rotation\HideOrientationUI
set it to 0
After !restart! you can assign a button to <RotateScreen>
Source:
http://www.fuzemobility.com/enable-long-press-of-phone-key-to-rotate-screen/
go to this place
http://www.lakeridgesoftware.com
and download wisebar 3 once you install it you can find setting where u can mention sortcut..
its written rotate screen. (just set execution and tick the radio box.)
for this i used dusk wisebar, (u can find in forum fo htc touch hd).
hope u got it
installing wisebar you dont even need other third party sfotware like flip it or change screen
thnx
I use Shell 3.0 so Wisebar is out of the question
HDtweak will let you enable rotate screen option, then goto settings>personal>buttons>set left key hold to rotate screen
bonesy said:
HDtweak will let you enable rotate screen option, then goto settings>personal>buttons>set left key hold to rotate screen
Click to expand...
Click to collapse
Where's the setting in HDTweak??
Riceburner said:
Where's the setting in HDTweak??
Click to expand...
Click to collapse
HD tweak 17.8 (17. diary , 17.8 screen orientation)
Hi guys,
i already have this option on my dutty rom and i have assigned it. But which button should i press to change the screen? i have tried all four buttons on my touch hd but the screen does not rotate.. :| am i stupid? ^^
thx
vikeor said:
thnx
I use Shell 3.0 so Wisebar is out of the question
Click to expand...
Click to collapse
whats wrong man even i use but the topbar looks crap thats why i use wisebar and design myself topbar without any crapy icon when i got menu in one side and rotation in another side which gives me preety look and i have just modified dusk wisebar which gave even better look and ya i use spb mobile shell 3.0.3.
thanks.
FrEcP said:
RegKey is:
HKLM\System\GDI\Rotation\HideOrientationUI
set it to 0
[/url]
Click to expand...
Click to collapse
i have a problem with setting it to 0 - a popup saying i have no access.
even when i type in 1 (the default) it says the same thing.
i use shell 3.0
please help
Hi all, I have a very easy problem, but i can't solve it ..
I need to block my PDA beacuse every time that a textmessage comes, ( and i have got it in my pocket) a lot of programs open accidentally.
How i can block my blackstone, when i switch off the monitor ? Does exist a program for me ?
Thanks Bye
I use AutoLock. It is great.
i have just installed it .. but i cant find it anywhere ..
does it works for win 6.5 ?
Yes, it is for 6.5. Go to Settings\System and you should see an icon for Smart Lock. Select (in addition to the one already ticked) to Lock on Suspend.
In addition I also apply the following tweaks to AutoLock
- a nice skin I use the Dusk skin
- I also apply the HeartofWolf delay fix (this moves the slide to the bottom of the screen and does fix the delay problem to a large extent.)
thanks guys !!
ClydeB1 said:
In addition I also apply the following tweaks to AutoLock
- a nice skin I use the Dusk skin
- I also apply the HeartofWolf delay fix (this moves the slide to the bottom of the screen and does fix the delay problem to a large extent.)
Click to expand...
Click to collapse
Use this for the delay fix instead (works perfectly and very simple/easy):
http://forum.xda-developers.com/showthread.php?t=587931
Svegetto said:
Use this for the delay fix instead (works perfectly and very simple/easy):
http://forum.xda-developers.com/showthread.php?t=587931
Click to expand...
Click to collapse
Thanks, I also came across that last night after this post and can confirm that it works even better than the HeartofWolf fix. The only issue I suppose is that one needs to remember to redo the fix each time one aligns the screen.
sorry but i have another little problem.. For example, when i'm using the tom tom navigator after 1 minute the screen goes black and "autolock" starts running.. Is there a solution to prevent this ?
Thanks in advance..
alle_89 said:
sorry but i have another little problem.. For example, when i'm using the tom tom navigator after 1 minute the screen goes black and "autolock" starts running.. Is there a solution to prevent this ?
Thanks in advance..
Click to expand...
Click to collapse
What settings have you chosen for lock? If set to Dim Lock, it will lock each time the screen dims. You will need to choose Suspend lock. You can also check the timing of your screen dims and suspend in Settings\System\Power\Advanced
plz if any one can help me to find what is the best panel type to use with
[ANDROID] Myn’s Warm Donut
nand
thalawa said:
plz if any one can help me to find what is the best panel type to use with
[ANDROID] Myn’s Warm Donut
nand
Click to expand...
Click to collapse
Panel 2 most common.
Best panel type depends on which panel you have, it can be type 1 2 or 3, panel type 2 is the most common, however if you have bad graphics such as wrong colours, streaks or white lines on the display, you probably have chosen the wrong panel type.
Changing panel type is easy under nand, simply flash the correct Panel type NBH.
If you use loserskaters NBH editor you can change panel type by editing the NBH, you should use Kallt_Kaffe's NBH's for this.
Reflashing the NBH does not mean having to reinstall Android again, it does not affect the installed build at all.
panel 2 and 3 seem visually the same but...
I used panel 2 for months because it worked out the gate.
and I finally switched to panel 3 because I read someone talking about wakeup problems
(which I was also having)
and with panel 3 I no longer have wakeup issues.
so just because it looks ok doesn't mean it is.
try all 3 and then you will know.
Panel type
I can totally agree with that. There is only 3, so its not that great effort to try them all.
I still dont know why there are different panel types. Does it have to do with the build of your phone (if it was t-mobile branded for example)?
The reason for 3 types of display is simply supply and demand, HTC just used whichever supplier could supply a compatible panel at the right time, and at the right price, and the reason why there is no pattern to which phone has which panel is that HTC use a 'Just In Time' supply system, which means that any of the 3 types were either available or affordable at any particular time in the process.
From what I can see i the source code the only difference the panel type setting affects is how some hardware registers are setup when the screen is turned on.
Thats's why choosing the wrong panel type works fine until the phone goes to sleep and you try to wake it up.
I'm convinced that we can autodetect the panel type but the question is how. The method used on Vogues doesn't seem to work on Kaisers.
But, Windows Mobile must detect the panel types, so there has to be a way. How Windows Mobile does it I have no idea.
so i just got a tilt 2 today. and I can't get screen orientation to change whenever I would like it to. I have calibrated G-Sensor and it works for a few programs. But it doesn't work for the home screen. I put a registry editor on my phone and noticed that the gsensor only has like 5 programs for it. how can i go about fixing this? I've tried to do a few searches, but haven't been able to find quite what I'm looking for
You want to use this:
[APP] G-Config (Configurator for the new SensorSDK 4)
really simple to add programs to your rotation registry.
If you read through that thread There's a way to ad manilla/sense/touchflo3d.... whatever you call it as everyone calls it what they want to the list.
That said, you will find this REALLY annoying. I had it set to that back when I had my touch pro and after a day I got rid of it cause even if you tilt the phone slightly the phone rotated and yeah... just annoying as hell.
An alternative you can have is download RhodiumKBDControl. Search for it on google and you'll find it. You can program buttons on your phone to do certain things. Most people with the tilt2 reprogram their PTT button to do something like open the camera or rotate the screen or adjust the brightness. The cool thing about it is you can program it so a long press does one thing while a single press does another while a double or triple press does something different too. This works for ANY key on our phone.
You're better off setting it to rotate via the button because like said after a day or so you'll just be sick of it.
thereason222 said:
so i just got a tilt 2 today. and I can't get screen orientation to change whenever I would like it to. I have calibrated G-Sensor and it works for a few programs. But it doesn't work for the home screen. I put a registry editor on my phone and noticed that the gsensor only has like 5 programs for it. how can i go about fixing this? I've tried to do a few searches, but haven't been able to find quite what I'm looking for
Click to expand...
Click to collapse
I use a program called Gyrator. Its awesome, and i have no problems with it.
You'll find it on the "software worth installing on the TP2" thread.
Good luck
thereason222 said:
so i just got a tilt 2 today. and I can't get screen orientation to change whenever I would like it to. I have calibrated G-Sensor and it works for a few programs. But it doesn't work for the home screen. I put a registry editor on my phone and noticed that the gsensor only has like 5 programs for it. how can i go about fixing this? I've tried to do a few searches, but haven't been able to find quite what I'm looking for
Click to expand...
Click to collapse
use the registry editor and you can add the programs yourself. all you need to know is the class name and where the .exe is stored. i have a .reg back up file to add rotation to apps. i originally found it on here somewhere but ive added/removed a few things.
otherwise you can do it manually.. if u want to know how, tell me; No mch time to write, right now
vic000 said:
otherwise you can do it manually.. if u want to know how, tell me; No mch time to write, right now
Click to expand...
Click to collapse
Already gave it to him vic
Aaron McCarthy said:
.....
An alternative you can have is download RhodiumKBDControl. Search for it on google and you'll find it. You can program buttons on your phone to do certain things. Most people with the tilt2 reprogram their PTT button to do something like open the camera or rotate the screen or adjust the brightness. The cool thing about it is you can program it so a long press does one thing while a single press does another while a double or triple press does something different too. This works for ANY key on our phone.
You're better off setting it to rotate via the button because like said after a day or so you'll just be sick of it.
Click to expand...
Click to collapse
Hi, every time I write a screen off memo it will not show on the AOD screen. Instead will go directly into a icon. If I tap twice the icon will appear for a brief time and then go back as icon.
The time it will stay on the screen will not be combined with the date/time.
Anyone has the same? Is it a problem of the settings or csc?
Tks
cristy78 said:
Hi, every time I write a screen off memo it will not show on the AOD screen. Instead will go directly into a icon. If I tap twice the icon will appear for a brief time and then go back as icon.
The time it will stay on the screen will not be combined with the date/time.
Anyone has the same? Is it a problem of the settings or csc?
Tks
Click to expand...
Click to collapse
Yes, same here - direct to icon. I saw review videos where the screen off memo actually remains on the display along with the always-on screen. I tried every combination (i think) of always-on display and lockscreen notification settings, but never found a way to get it to stay.
On those same videos, by the way, the main settings screen looked very much like the one of the Note 5 and not at all like Grace UX, which is what i have. So i wonder if there are different software versions out there with some serious differences.
Maybe csc related ? mine is XSG.
remiotte said:
Yes, same here - direct to icon. I saw review videos where the screen off memo actually remains on the display along with the always-on screen. I tried every combination (i think) of always-on display and lockscreen notification settings, but never found a way to get it to stay.
On those same videos, by the way, the main settings screen looked very much like the one of the Note 5 and not at all like Grace UX, which is what i have. So i wonder if there are different software versions out there with some serious differences.
Click to expand...
Click to collapse
If you go into the always on display settings and then about it should show you an update is available. After this is downloaded it is now working correctly.
Not sure why this did not ship on the phone or they make the update more obvious.
Pin it when writing
Sent from my SM-N930V using XDA-Developers mobile app
CBeckstrand said:
If you go into the always on display settings and then about it should show you an update is available. After this is downloaded it is now working correctly.
Not sure why this did not ship on the phone or they make the update more obvious.
Click to expand...
Click to collapse
I didn't get an update prompt, but this helped me. I opened galaxy apps and looked for updates there. sure enough, there was, and installing it fixed it. All good now!
mysteryman69 said:
I didn't get an update prompt, but this helped me. I opened galaxy apps and looked for updates there. sure enough, there was, and installing it fixed it. All good now!
Click to expand...
Click to collapse
i didn't check that, but Galaxy App pushed an update of Always-on Display yesterday, and indeed now it works the way it should
Thanks. Update worked. I was wondering why it wasn't working.