FlyKernel is an overclockable kernel for the Hero GSM, aimed to improve stability, battery life and performance (generally in that order).
The Hero GSM now also has a newer .35 kernel "Las Venturas" you should also check that one out. At the time of writing these lines, the newest version of Las Venturax is found on the second post of the above thread (my post ) - you should check which post is more up-to-date on that thread.
Download and instructions are on this post.
FAQ and advanced subjects are on the second post.
Change log and previous versions are on the third post.
WARNING: Please make sure to have an up-to-date backup before you flash this kernel!
FlyKernel-13 (#253)
FlyKernel 13 - Desean
FlyKernel 13 - Mediafire
FlyKernel 13 - Multiupload
This is a post-LasVenturas update for FlyKernel, after quite some time without any updates.
Although I currently have a bit of a personal preference for Las Venturas, I believe that it is even better to have two excellent kernels for the hero (internally totally different ), so that the users can choose whichever works best for them. Possibly, on some of the older ROMs this kernel might work better. This should also help isolate kernel issues vs. ROM issues.
SmartassV2 (informal description and comparison with the first smartass)
SmartassV2 is a governor (controls the frequency of the CPU at each give moment) which like the first smartass is generally based on the implementation of interactive with some major changes and the addition of a built in sleep profile (behaves a bit differently when screen is off vs. on).
The smartassV2 improves the very naive scheme which the first smartass had: The first smartass (with the values I set for the hero), would cap the max frequency at 352Mhz for sleep and when screen is on, would do the opposite and keep the frequency at 518Mhz or above. For sleep this was very effective but a bit crude and unclean, and there could be some cases where you would need processing power even when screen is off (something is updating and music is playing and etc.). For screen on, smartass1 was too quick to jump to the max available frequency and again would never go below the 518Mhz, so in a nutshell its was using "too high" frequencies.
SmartassV2, introduce (internally) an "ideal" frequency which is the frequency we are "aiming" for, in some sense. The way I see it is that the "ideal" frequency is a hint to the governor what is a good balance between performance and battery life. Now when screen is on, I set (on the hero) the ideal frequency to 518Mhz which will ensure nice responsiveness but limit unnecessary use of higher frequencies when they are not needed. When screen is off, I set the ideal frequency to 352Mhz (0 will disable the screen state tracking all together). From my testing this will "convince" the governor to spend most of the its time during sleep at the lowest available frequencies. Note, that both during sleep and when awake the entire frequency range (as defined by the "user" - i.e. selected with SetCPU) is used by smartassV2. For example, when the CPU is loaded heavily, the highest available frequency will be used regardless if screen is on or off.
Boot OC and optional tweaks
Optionally, you can rename the update file before you flash to change bootup frequencies and other options.
If you don't rename the file and flash "FlyKernel-13.zip" you will get the default tweaks and the min/max frequencies will remain as they where before.
For example, to set the max/min frequencies on boot to 614/176, rename "FlyKernel-13.zip" to "FlyKernel-13-M614-m176.zip".
Supported "flags" are:
Notice, all flags are case sensitive.
-MXXX - set max frequency to XXX
-mYYY - set min frequency to YYY
Supported max frequencies:
518 576 614 633 652 672 691 710 729 748
Supported min frequencies:
19 176 264 352 518 576 614 633 652 672 691 710 729 748
Default behavior, if these flags aren't given, is not to change your current settings.
For frequency recommendations and more info see FAQ #5.
Technical details: max/min frequencies are set in the kernel's ramdisk init.hero.rc file. Previous settings will be replaced. Furthermore, if one of your init.d script sets the max/min frequencies, these lines will be removed.
If you have SetCPU or other program changing the speed at boot, their change will take effect and overwrite this setting as soon as the ROM completes to boot.
-nologo - Don't show boot animation.
-logo - Show boot animation.
Default behaviour, if no flag is given, is not to change your current settings.
-noatime - Mount all partitions with -noatime to improve IO.
-atime - Mount no partition with -noatime.
Assuming, your ROM did not mount any partition with noatime, then the -atime option should undo the -noatime option perfectly. Unfortunately, it seems some ROMs (i.e. VR12) mount only some of the partitions with -noatime. It seems that in some cases, changing the noatime configuration causes boot problems.
Therefore, I highly recommend you make a backup before trying the -noatime flag - this is the only full proof way to go back if it messes something up.
Notice, this does not effect the ext partition as it is not mounted in the ramdisk init.rc. As far as I know, all ROMs mount the ext partition with noatime.
-notweak
By default, the updater will remove scheduler tweaks which exists in the ramdisk init.rc script, in order for the scheduler default compiled into the kernel to apply. This flag will disable this behavior.
More techinical information for developers about the smart update package has been updated in my github wiki.
Limitations and known bugs:
- This kernel will not make you coffee (I hope)!
Integrating kernel in a custom ROM (for ROM developers)
You can use my from above:
http://floyo.desean.net/FlyKernel-13-Floyo.zip
This file has a regular boot.img with a ramdisk compatible with Floyo 1.4, boots at 576/352 (smartassV2) and has all the kernel modules unpacked.
If you need to edit the ramdisk, you can either unpack the above boot.img as explained here. Or you can get the kernel binary file from my smart update package, under tmp/flykernel/kernel. The kernel modules are package in the smart update package under tmp/flykernel/syslibs.tar.
Kernel Sources
My sources with all my updates and changes are found on github:
http://github.com/erasmux/hero-2.6.29-flykernel
Use hero_defconfig for the regular version and hero-bfs_defconfig for the BFS version.
See the wiki for more information about building the kernel and more.
Please feel free to contact me regarding my sources and kernel development.
Using my Kernel Sources
Feel free to use my kernel sources, fully or partially in any (legal) way you see fit.
If you modify the sources, I urge you to share your changes with the community (as GPL obliges you to do), preferably using github. You can fork my sources on github, and this will make it easier for you to grab new changes from me and also allow you to fill pull requests so I can pull your changes back to my kernel.
GPL
Yes I am GPL complaint, all is included inside the sources, including the GPL license itself.
Thanks
Huge thanks to Desean for giving me file hosting that makes my life easier
Many thanks to all the Kernel/ROM developers here, especially those with open source kernels on github - LoxK, Cyanogen, Ninpo, Radu and especially Decad3nce.
Big thanks to all those who helped test the pre versions and reported bugs, specifically also to my long time testers (moonshield and floomat)
Donations are always welcome and accepted but are in no way required.
FAQ and Advanced Subjects
FAQ
0. When reporting a problem, do I need to include the ROM and exact kernel version I am using?
YES!
1. How do I flash the kernel update file?
You flash it from recovery, like any other custom ROM. If you are not familiar with recovery and/or haven't rooted your phone, start here.
2. Do I need to wipe anything when installing the kernel?
No you don't need to do any wipes. Just install the kernel through recovery and reboot
3. The update from recovery failed with errors/warning?
Please, in the same recovery session which you tried to apply the update and failed, select the "Move recovery.log to SD" from the "Other" menu and post in this thread with the recovery.log attached (for example in a .zip file).
4. After flashing the kernel my ROM does not boot
A logcat of the boot process might help me understand the problem. Using adb you can generate one with the following command and attach it to your report:
Code:
adb logcat > logcat.txt
You need to run this command relatively close to the start of the boot. Close the window after the phone is stuck for few minutes (say 2 mins with no change should do). You can start by running "adb logcat" and seeing if you get any output at all. If so, reboot once more and run the above command from the start of the boot (approximately).
Please also clearly state which ROM you are using and which kernel did work for you (which one did you use before).
To recover from such a scenario, boot into recovery and restore a backup of your working state. If you do not have a backup, and its the kernel fault, flashing your old kernel should solve the problem.
5. What min/max frequencies should I choose?
The short answer: min 176, max 614, if you have wake up issues up the min speed to 264 and then to 352.
To play with the speeds I suggest you install SetCPU (or similar app), so you can view and change your settings interactively. To change it permanently from the bootup see instructions on first post. You also use options like "Set on boot" in SetCPU if you prefer that.
The long answer:
The max frequency will effect the speed and responsiveness of your phone when screen is on. Note, that any speed above 528Mhz is above the specification of the manufacturer, hence is overclocking and could, in theory, shorten the life of your device. At high enough frequencies all devices will stop functioning, the exact threshold depends on your luck with your specific device. From my experience and knowledge, running at stable frequencies (or say one or two steps down to be on the safe side), should not harm your device - of course all overclocking is done at your sole responsibility.
As far as I know, almost all device can handle 652Mhz, most can reach the 691/710 area and some can even reach higher than the 748Mhz cap of this kernel. To find out which speed your phone supports, use SetCPU (or similar app), start from 614 for example and up the speed one tick a time. Don't select "Set on boot". At each step play with the phone a minute or two. If the phone gets stuck, reboot it (take out battery if necessary) and go one tick down.
Additionally, note the higher your max frequency the higher the battery drain will be when the screen is on. It is true that the display, data, wifi, gps, etc. should drain much more than the cpu. Still, I recommend staying in the sane frequencies range, no more than say 691Mhz (even if you phone can handle it).
Finally the min speed will effect standby battery life (when screen is off). From my experience there is a difference in battery life between 19Mhz and 352Mhz min frequencies but it is relatively small (much less than I expected). 19Mhz is not stable for me, almost stable, but over a period of weeks you will probably experience weird and possibly very rare instabilities. For me this was the when playing music with screen off the phone got stuck at 19Mhz (very hard to find this out), and became totally unresponsive until I rebooted it. Therefore, I recommend starting from 176Mhz, and if you have wakeup issues to bring it up. With 352Mhz you should have no wake up issues at all.
6. I am having wakeup issues (such as unresponsiveness to wakeup, weird coloring after wakeup, screen inversion, caller id not working on wakeup)
Up the min speed to 264 and then to 352. With a min frequency of 352 you should not have any wake issues.
See the FAQ #5 above for more information.
7. I am experiencing bad battery life with FlyKernel
First, please make sure to reboot the ROM at least one time after you flash the kernel. There have been reports that ROM/kernels behave badly on the first boot.
Personally, I do not do battery calibration, but if it makes you happy go for it. I do recommend at least charging the battery overnight, or a couple of hours after it has reached 100% to be sure it is full. Then use it, your regular usage for a few days and only then judge the battery life.
The battery percent indicator, over short periods of time seems extremely inaccurate and its very hard to reach any correct conclusions based on it.
If you do want to report bad battery life, please state your settings (kernel version, min/max speeds, governor, etc.), over which period you have been testing the battery, under what usage, what is the battery life you are used to having with which kernel and what is the battery life you are experiencing now.
Note, that roughly speaking, I lose less than 1%/hour when screen is off (wifi, data, gps, etc. also off), and about 10%/hours when just screen is on but phone does nothing at all (again wifi, gps, etc. off). About 20%+/hour when stressing my phone (although I have no data plan so can't test that). I am using the latest FlyKernel @ smartass 614/176.
8. What size should I give the swap partition?
short answer: 0.
long answer: I do not recommend using swap on the hero, hence 0. If you have a very fast SD card, and want to try it, give it say 64Mb. Note that I know of no ROM for the hero which activates swap automatically - you'll need to add a init.d script or something to activate it (see a bit more info here). Let me know if you find a scenario where the swap gives substantial improvement over no swap.
Finally note that FlyKernel versions before 12 do not support swap.
9. Should I use ext2, ext3 or ext4 for my ext partition?
Short answer: ext4. Note that FlyKernel versions before 12 did not support ext4, ext3 is supported since version 10.
Long answer:
Previously, I was under the impression that a journaling file system is a very bad idea for flashable storage. I still think its not ideal but better than the other alternative:
I have been using dual booting, placing an entire development ROM on an ext2/4 partition and using it for development. And when using ext2 it would get errors almost every boot and every couple of days get corrupted to the point I needed to manually restore damaged files to get it working....
It seems that if you only use it for app2sd, there are very infrequent changes to this volume (only when you install a new app), hence it does not get corrupted. But this also means that ext4, in this scenario, will not pay much overhead because there are very few changes. And in the case there are many changes, if I have to choose between a slightly shorter SD life with ext4 (and then I can finally get a faster one ) or risking my data getting corrupted on a daily basis with ext2 - I prefer the first (ext4).
Questions 10-13 are now obsolete with smartassV2 - see the first post for details about it
10. Do I need a SetCPU (or similar) screen off profile with smartass?
No, smartass automatically limits the screen on frequency to >= 518Mhz to ensure responsiveness, and screen off frequency to <= 352Mhz to keep standby battery life under control. Much like HTC's perfllock, it does this at the kernel level so it is much better than app level screen off profiles.
11. Using smartass the CPU frequency does not drop below 518Mhz (with screen on)
Intentional to ensure responsiveness. From my testing, when screen is on battery drain difference of speeds < 518Mhz is not significant relative to the drain by the screen itself.
12. Using smartass the CPU frequency does go above 352Mhz (with screen off)
Intentional to keep standby battery life under control.
13. Using smartass the CPU frequency is always at its max (or always at 352Mhz when screen is off)
See "Monitoring the CPU frequency" in the "Advanced subjects".
14. I am experiencing spontaneous reboots
Please post, in this thread, with as much detail as possible about the problem.
Please also attach the last_kmsg, which you can get from example using:
Code:
adb pull /proc/last_kmsg
15. What happend to the BFS version?
With the FlyKernel-12 scheduler tweaks (CFS scheduler), it surpasses the BFS version in every way. I tried to compile a BFS from the FlyKernel-12 code but even in neocore, in which the BFS was always much better, the new tweaked CFS leaves the BFS in the dust. Hence, I see no reason to continue and build/support a BFS version. The hero-bfs_defconfig is still up to date in my sources if anyone wants to build it themselves.
*. I am experiencing an issue not covered in the FAQ which I believe is kernel related
Please post, in this thread, with as much detail as possible about the problem.
Please also detail why you believe this kernel related. The best "proof" that it is the kernel's fault, is to flash back your old kernel and verify the problem is solved, then reflash the new kernel and verify the problem reappears. In any case please detail the kernel and version(s) on which your are experiencing the problem and those on which you do not.
Advanced Subjects
* Monitoring the CPU frequency
Will rewrite this more clearly. In the meantime:
http://forum.xda-developers.com/showpost.php?p=9925116&postcount=903
http://forum.xda-developers.com/showpost.php?p=9929325&postcount=919 <-- Mainly this one!!!
http://forum.xda-developers.com/showpost.php?p=9989996&postcount=970
http://forum.xda-developers.com/showpost.php?p=10010110&postcount=990
Change log and previous versions
FlyKernel-13
- Scheduler tweaks: use the scheduler settings that worked well on flykernel-11c and 12pre6 (tweaked them very very little), responsiveness should now be better than on the FlyKernel-12 release
- Backported the new smartassV2 - now the default
- Added interactiveX governor also
- A few config changes and compiler optimizations
FlyKernel 12a (mediafire)
- Fix wake up issues with new scheduler tweaks
- Smart update script: make noatime tweak option to (hopefully) solve boot problems
FlyKernel 12
- Smart update script
- Optimized scheduler parameters
- Fix Usb mass storage after usb tethering (at least on CM ROMs)
FlyKernel-12pre6
- Align ext2/3/4 config options
- Merge small fixes to lowmemorykiller module.
FlyKernel-12pre5
- Backport of smd rpcrouter to avs333 request.
FlyKernel-12pre4
- Partial fix for the lockscreen flickering when locked/unlocked rapidly (with smartass).
- Very small tweak to other smartass parameters.
FlyKernel-12pre3
- Fixed frequency table according to Radu's comments. Frequencies which are not on PLL2 have been removed!
- Tweaked smartass to spend more time at the lower frequencies to improve battery life. Also smartass's allergy to 19Mhz has been cured!
- Some configuration tweaks, mostly sleep related.
- 528Mhz frequency does not work well with OC, so it has been replaced with 518Mhz which does work fine.
FlyKernel-12pre2
FlyKernel-12pre2 optimized for CM based ROMs (default speed 576/352)
- Added compcache support
- Added 19Mhz and 264Mhz frequencies
FlyKernel-12pre1
- Lower voltages of high frequencies (>= 528Mhz)
- Added ext4 support (I currently use it for dual booting)
- Interactive updated (does anyone find it better than smartass? in what scenario?)
- Smartass fixes and optimizations - should be more responsive now and battery life should (hopefully) still be excellent.
- Camera backport from .32 (12pre1-cam32)
FlyKernel-11c
FlyKernel-11c #66 (Generic)
FlyKernel-11c-BFS #67 (Generic)
- Smartass: now wakeups up from sleep first at 528Mhz (no OC), to hopefully help with wake up issues.
- Bunch of fixes/optimization from CM espresso kernel and from Decad3nce (see github)
- BFS version
"Optimized Kernel Packages" (only for CM6 based ROMs: Floyo, Elelinux, Froyd):
Find the appropriate kernel for you by its name in the FlyKernel-11c directory
The naming conversion is:
flykernel-11c-CM-<min>-<max>.zip (with boot animation)
flykernel-11c-CM-<min>-<max>-nologo.zip (no boot animation)
flykernel-11c-BFS-... (BFS version)
FlyKernel-11
- New smartass governor (see technical detail below). Previous governors still supported.
- Added IPv6 (only for Google Googles?!)
- Fixes camera freezing CM6-based ROMs (thanks Ninpo for a "code cleanup" which fixed this )
- Fixes detection of USB connection during boot on CM6-based ROMs.
- Various squash-sets imported (see github)
- NORMALIZED_SLEEPER disabled.
FlyKernel-10a (rapidshare megaupload)
- Optimize some sleep/idle code (thanks to ninpo)
- Add module for IP header compression - hopefully this helps google apps (inspired by ninpo).
FlyKernel-10a-BFS (rapidshare megaupload)
- BFS version of 10a.
- Whats is BFS? see wikipedia and more details here.
FlyKernel-10
- Fixes for Froyo ROMs (FroydVillain and Elelinux)
- Added some more modules inside the kernel (notably using VPN should now work). I am now more aligned with the modules included in other kernels (well mainly ninpo's kernels), so hopefully you should not run into any missing modules.
I even added support for ext3.
- Generic update for all ROMs.
Flykernel-09:
FlyKernel-09 for VR12,RCMix,ChoclateEclair,Modaco and SuperHero
FlyKernel-09 for Kimera and Sensehero
FlyKernel-09 for MMod 1.2.3
FlyKernel-09 for FroydVillain and elelinux - Beware there are problems with 09 and Froyo ROMs.
FlyKernel-09 for CM6
- Added the excellent minmax governor.
- Removed interactive as it does not behave well at all - just use minmax
- added version which supports the 288M data partition - removed now since MAX appears to be fading out - just use dalvik2SD instead.
FlyKernel-08
FlyKernel-08 for Froyo and ASOP
Added Mike Chan's interactive governor, adaptation to Hero by Nadlabak and Ninpo. Added some tweaks of my own - now works well also with big frequency table.
Tweaked conservative governor for better performance.
Fixed/cleaned kernel co/nfig and modules - among other things iptables should work fine now.
Bigger frequency table.
FlyKernel-05 (BFS)
BFS version of the FlyKernel-04
FlyKernel-04
Based on HTC 2.6.29 official kernel source.
Includes patchset 2.6.29.6 and various fixes
Boot OC - Only for Sense based ROMs (The smart update script added in FlyKernel-12 provides a cleaner and better solution for all ROMs)
Boots very quickly by setting the OC speed right from the start. Also sets the original HTC boot animation which is quicker for most ROMs. Finally, replaces the 09zipalign with 09betterzipalign (again thanks ninpo).
Please have a backup before you try this, as there is no other easy way to undo this.
Select the update file according to the speed your phone can handle:
boot @ 653/160: http://www.multiupload.com/5RAXNJ7AWY (rapidshare megaupload)
boot @ 672/160: http://www.multiupload.com/RRQ0HYI8O8 (rapidshare megaupload)
boot @ 691/160: http://www.multiupload.com/20AJV7FLQI (rapidshare megaupload)
boot @ 710/160: http://www.multiupload.com/WHROUYNGQ6 (rapidshare megaupload)
Theoretically, this should now work on any ROM and any OC kernel. I have tested the 691 update on VR12 and Froyd 1.4 with my kernel and it works fine. Above files (now with "_" at end of name) updated to also work on ChocolateEclair and hopefully other ROMs on 31/8.
Note that in my recent kernel versions the lowest frequency is 176, so it will boot with a min frequency of 176.
cool.. will try. like the idea of overclocking before boot
can you post a diff file of what you modified?
diffs of which change?
there are a lot of changes and fixes, which range from fixes by me in the source code, to just copying/applying files from others.
I think it would be better to keep this thread open for issues and questions about the usage of these fixes. Still I will be more than happy to share anything I have done - please contact me with the exact change you are interested, either by PM or open a new thread if you think it is of general interest for developers.
There are literaly dozens of different kernels floating arround, all of which are always "brand new super fast ultra optimized". From a user perspective it's hard to tell which one is the best. I think this community needs more openness in the developpement. I think it would be a good habit if developpers posted their diff files (of everything) instead of just saying that they made "optimizations".
thanks for your work
zorxd said:
There are literaly dozens of different kernels floating arround, all of which are always "brand new super fast ultra optimized". From a user perspective it's hard to tell which one is the best. I think this community needs more openness in the developpement. I think it would be a good habit if developpers posted their diff files (of everything) instead of just saying that they made "optimizations".
thanks for your work
Click to expand...
Click to collapse
Trying it out might help in deciding which is the best for you. There is no such thing as an absolute best, sorry. To each his needs and his preferences. I also included a convenient undo update script which restores the original kernel.
Personally, I am not aware of any other kernels for the VillainROM (except the original one by ninpo) and for me my kernel works better. Additionally, I have gotten very good feedbacks for my kernel and fixes on iandroid (using HebVillain which is very tightly based on VR12). So I thought others here might want to try it and maybe would also like it. Please also feel free to bash it, but please try it first and then reply with comments which I can relate too.
Finally, I am all for complete openness: If you are really interested in the kernel sources, you can find them along with all my changes here which could be of great to help to you especially if you want to compile the hero kernel yourself. In such a case I would recommend starting from here. The biggest other change is the RTL fix, for which you find the diffs here (it is verses the eclair branch of the android source code). As for the other files & changes I did, I have tried to detail as much as possible in my original post.
Feel free to contact me (also by PM) if you want more info or help.
I just installed your Kernel and the Boot Optimization and brother my phone is flying!!!! GREAT JOB!!!
100% recommended flash for your VR12
THANKS!!!
yep!
all great! you are the MAN =)
good work erasmux, does it work with Arabic language with Arabic fonts installed ? I mean connected letters
Thanks a lot
I hope it does. I don't use Arabic, but if there are problems, report them and I'll do my best to fix them.
Good job erasmux!
Problems for me.....
Installed Kernel & Optimization and Boot time optimization
Made all my icons go to pot,
"problem loading gadget" on powerbar,
"problem loading gadget" on Battery Meter Widget
Game Icons, CoPilot live, System Widget all showing default app icon.
Lost a WHOLE LOAD of installed apps, simply not there listed any longer. So many gone I can't recall what I have lost.
Tried the undo file Original VR12 Kernel:
Got my apps back but still probs with some widgets, boot screen remained the HTC one (didn't revert to the villian screen)
First, I have fixed the kernel restore file in the original post to also restore the original villain boot animation, note that the new file is called: V12-RestoreKernel_.zip (with additional _ at end)
Thanks, for the remark.
Regarding the apps, that is very weird. Did you get these "problem loading gadget" on the screen or where? A logcat from the start of the boot would be very helpful (although I can understand if you don't want to flash it again just to help me debug...).
Regarding the widgets (when the apps do appear) ,try clearing the HTC Sense data (unfortunately this will reset your desktop but it should restore your widgets and its better than having to reinstall everything).
I'll have to have a go later.. tied up at the mo..
Prob loading gadget appeared on the screen (still does).
Will try clearing sense and post back later.
EDIT: Clearing Sense worked. Thanks.
made battery callibration (http://www.villainrom.co.uk/viewtopic.php?f=97&t=1789&start=20#p19769).. full charge (~17:15).. after 5 hours using phone.. 5-7 calls (1-5min each), 30 min wifi and playing =) and now ( 22:40) 99% battery!!! blja, im very happy!!!!!!!!!!
cpu always 245-576mhz
only like with original VR12 kernel after few hours of use at 576mhz linpack score down from 2.5 to 1.8 , but after installed autokiller ( preset 60mb) it's always 2.45-2.57
now i think VR12 the best!
Thank you one more time! will write back tomorrow eve =)
is this included stuff really usefull or it can be disabled?
ipv6 (lot of different options)
LZO and ARC4 crypto stuff
extra PPP stuff (MPPE, PPPOLAC, PPOPNS)
DSCP and TCPOPTSTRIP
INET_TUNNEL
XFRM_IPCOMP
CPU_FREQ_GOV_CONSERVATIVE
the /proc/config.gz (kernel .config support)
Also, I noticed that the device boot with mem=64M. Does it mean that the rest of the RAM isn't used?
AFAIK the only way to change this is to recompile the kernel.
Many of what you said I saw requests here on XDA that kernel developers add (there applications which use it). Please note that many of those modules do not automatically load and need to be manually loaded so they should not have any effect.
Others stuff, mainly the IPv6 stuff i doubt anyone uses - must have "inherited" it from the config i used as a base. I will look into it for future release if I can remove that stuff.
About the mem=64 I am not sure what that is, my phone is definitively using the full memory. I will also try to understand and possibly adjust that for future releases.
Thanks for the input.
An other question, is a kernel really tied to a specific ROM? I have VR12 right now so I could try it, but I was also thinking of upgrading to a 2.2 ROM.
About the modules, I think that most of the stuff that I noticed was compiled in (=y) and not as modules (=m). If they are only used by 1% of the users, I think it would be better to have them as modules and make sure that they don't load automatically at boot.
Also, do you know if it is better to have a small frequency table (with, let say, only 3 choices) to avoid excessive frequency switching?
Is the dalvik to SD trick included worth it for those of us with the original 2GB SD card?
Related
[ROM][08-06-2012] ~×~ EliteMod & Kernel CM7 ~×~ [sd-ext/swap] (ics has own thread)
EliteMod 120316 + EliteKernel 120319
Turbo just got a new meaning.
This mod is a custom ROM based on CyanogenMod7 nightly and modified CM7 Kernel.
The primary aim is to dramatically increase device speed without requiring frequencies above 1GHz in daily use.
The secondary aim is to improve battery consumption where possible by fine-tuning system settings.
The bonus is getting rid of some annoying post-flash steps and settings.
To achieve this required highly experimental steps outside of the scope of Android's security system and direct intervention in userspace.
Be aware that I made this mod primarily for myself, I went to extremes to squeeze the last bit of performance out of my device. Expect no flashy stuff, just raw power and great base for your customization. I guarantee no support whatsoever and any modifications you make to your device are solely your responsibility. It's a good idea to nandroid backup first!
Warnings - must read:
1) Do a nandroid backup, this ROM is not for everyone.
2) Full /data /cache wipe is mandatory before moving to EliteMod, even from CM7! Not kidding!
3) This ROM relies heavily on the bundled EliteKernel. Flashing any other kernel unless I explicitly put a link in download area is probably a bad idea.
4) Flashing gApps or any performance-boosting packages is not recommended. Latest gApps are already included and tweak scripts may in some extreme cases break sd-ext support.
The ROM requires a manual reboot after account setup, you will see REBOOT REQUIRED on screen. Tap it and reboot the device as usual to apply additional tweaks. Any settings done before this reboot may be lost.
6) If you want to do a "Factory Reset" of this ROM, wiping /data /cache /sd-ext wipe is not enough. You must re-flash the zip to really start clean.
The usual: Do not use TitaniumBackup to restore System components unless you know what you're doing. Restoring LauncherPro user data will forfeit fine-tuned launcher settings. Wipe deletes battery stats and recalibration is necessary to see real battery usage. You can backup your battery stats first before wiping - just use my tool - EliteMod will automatically restore the backup and save you the need to recalibrate. If you really want LWP or ADW, mv them yourself from /data/local/ as well as live walpapers and other useless garbage.
Some screenshots of the default launcher + my customized homescreen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changes from stock CM7 nightly:
- moarrr speeeed (optimized for lower frequency range to save power)
- kernel tweaks for better snappiness/battery balance
- more battery 100% guaranteed
- replaced ADW with LP (it crashes once after boot but still the damn fastest out there) and Go Ex
- replaced gallery with QuickPic
- Opera with performance tweaks
- added some MIUI stuff
- extra sounds and bootanim for my convenience
- removed LWP
- more in changelogs
Credits:
Big thanks to all the amazing devs who made this compilation possible.
Cyanogen and crew for his amazing ROM base
Federico Carnales for the smoothest launcher
Nanling Zheng for the best gallery app
SparksCo for the original sd-ext mounting script
JaeKar99 for the boot anim
Sybregunne for his OC daemon
nhnt11 for the gorgeous NTSense themes
MIUI team
Virtuous team
And many others I'm sure I forgot to mention - thank you and keep it up.
Download Link
Download from my high speed server:
High speed download:
http://elite-force.eu/elitemod/EliteMod120316.zip (see THIS for sd-ext and ext4 migration)
Mirror (slower):
http://www.mediafire.com/?3k5bvbk5uinn4no (see THIS for sd-ext and ext4 migration)
Standalone CM7 Kernel:
http://elite-force.eu/elitemod/MOD_EliteKernel_120319.zip (for any CM7 nightly based ROM, including EliteMod specifics)
Standalone ICS Kernel:
http://elite-force.eu/elitemod/MOD_EliteKernelICS_120608-79.zip (for any CM9 or AOKP based ROM = do not use with CM7 based EliteMod)
(SEE THIS if you have sd-ext or swap partition on your SD card)
Old versions:
Old versions:
I will be trimming old versions soon, here are most mirrors http://www.mediafire.com/?613ufmrzd2ovt
Click to expand...
Click to collapse
Undervolting tools (Windows only):
http://elite-force.eu/elitemod/UV_TOOLS.zip
Click to expand...
Click to collapse
Mods, fixes and tools:
http://elite-force.eu/elitemod/TOOL_BackupBattStats.zip (flash to save battery stats to SD)
http://elite-force.eu/elitemod/MOD_OldVending2.zip (flashable/default)
http://elite-force.eu/elitemod/MOD_NewVending3.zip (flashable)
http://elite-force.eu/elitemod/MOD_GTalk2.zip (flashable)
http://elite-force.eu/elitemod/MOD_OriginalDockIcons.zip (flashable, restores LauncherPro dock icons to EM default)
http://elite-force.eu/elitemod/MOD_GPS_Stock.zip (flashable/default)
http://elite-force.eu/elitemod/MOD_GPS_CM7.zip (flashable)
Click to expand...
Click to collapse
Old mods only up to #244:
http://elite-force.eu/elitemod/MOD_UmaroKernel_106.zip (flashable/default)
http://elite-force.eu/elitemod/MOD_TiamatKernel_114.zip (flashable)
Click to expand...
Click to collapse
Kernel source:
http://elite-force.eu/elitemod/elite_kernel_vision_source_120122.rar
Click to expand...
Click to collapse
Frequently Answered Questions:
- if the phone is not smooth, make sure you only have ONE app that controls CPU active at a time. Daemon OR SetCPU OR System Tuner etc. You can disable other apps by not giving them superuser access.
- changing your locale to english-us fixes the new market issue if you have problems but don't want to flash the old market.
- to save even more battery, undervolt your CPU by following the guide below and my easy to use UV TOOLS package. Alternatively use this program to modify your voltages https://market.android.com/details?id=com.incredicontrol .
- please include your ROM and kernel name if you ask an undervolting question in this thread and you are not running EliteMod
Click to expand...
Click to collapse
Recommended SetCPU settings (daily driver - EliteKernel only):
P7 (Temp > 46C) @ 122-768 smartassV2
P6 (Charging) @ 768-1248 smartassV2 (do not set too high, it can get hot if you use navigation in a car)
P5 (Screen Off) @ 122-768 smartassV2
P4 (B < 15%) @ 122-864 smartassV2
P3 (B < 30%) @ 122-902 smartassV2
P2 (B < 50%) @ 122-940 smartassV2
P1 (B < 101%) @ 122-1036 smartassV2
Click to expand...
Click to collapse
These settings implement my own "Final Fortress"(tm) philosphy of battery management. The speed will decrease progressively with battery discharge - basically this will make your battery last longer the longer you are not charging. The goal is to save that precious last drop of power you might need in a tight situation at the end of a long day. All that without sacrificing speed when you have plenty of charge left. You should not notice significant speed decrease until you hit the reserve @ 15%.
UV hint: If you've built your own stable undervolting table, you can maximize speed with no impact on battery by aligning the max frequencies to your specific voltage peaks. (example: if there are 3 different frequencies stable on the same voltage, always use only the fastest of the group)
~CHANGELOG:
(changes with ! require full wipe)
120319 (kernel only)
+ allowed undervolting all the way down to 700mV
120316
+ updated to latest kang
+ updated apks
+ much more resilient sd-ext mounting
+ verbose mounting script (see logcat for debugging)
+ tiny sd-ext performance increase
120315
+ latest kang
+ updated apks
+ new performance tweaks
+ optional sd-ext and/or swap support
+ relaxed swap priorities compared to experimental build
+ tweaked sd-ext I/O speed (ext4 only)
+ tweaked internal storage I/O speed (need ext4 on /data and /cache)
+ fixed Opera settings transfer
+ new set of Opera tweaks for sick performance
+ removed ROM Manager, recommend using 4EXT recovery from now on to take advantage of ext4 I/O tweaks
+ forcing dalvik-cache to internal memory for performance reasons
120310
+ latest kang
+ updated all apks
+ Scary not used by default (screen-off is now @ smartassV2 /w 768MHz max)
+ OC Daemon disabled by default, use control app to enable
+ default UV not applied by script (it is built into the kernel anyway)
+ new boot anim
+ different default theme
+ speedy postsetup script on update (second boot no longer takes eternity)
+ enabled swap support in kernel
+ improved kernel performance
120122
+ 22-01-2012 Kang build
+ added freqs below 245MHz with heavier UV
+ switched to andrev_oc and daemon
+ changed default wake frequency settings to 122-1036, SmartassV2
+ reverted ondemand gov to CM7 defaults
+ updated all apks
+ greatly improved ROM update speed (second boot)
!+ lockscreen clock not centered by default (weird in landscape)
+ changed default data mode to auto instead of preferred
+ updated default UV table in userinit.sh to match kernel internals
+ updated UV_TOOLS package to match EliteKernel
+ added tweaked Go Launcher Ex + most widgets + Sense theme
+ added 2 Sense themes to CM7 theme manager
120107
+ Updated to 05-01-2012 kang
+ Fixed garbage collection bug
+ Tweaked garbage collection and hardcoded defaults to standalone
+ Tweaked SmartassV2 for better scaling (EM + standalone)
+ Tweaked Scary for better battery to do better what it's supposed to do (EM + standalone)
+ Tweaked SIO scheduler for better I/O speed and battery (EM + standalone)
+ raised default frequency from 940MHz to 1GHz
+ lowered default frequency from 768MHz to 245MHz (raise back for more smoothness if you don't care about battery)
+ Tweaked storage subsystems for better I/O performance (EM + standalone)
+ moved hard-coded kernel settings from ROM to Kernel config (better maintainability)
+ updated all bundled APKs
+ updated SU
+ if you're using SetCPU, I recommend to update your profiles
111227
+ improved kernel performance
+ fixed undervolting support
+ released a standalone kernel
+ Important: Use the 111224 to 111227 patch instead of standalone kernel to improve stability above 1200MHz
111224
+ changed versioning to a date string until nightlies resume
+ updated all apks
+ updated to latest kang build 111222
+ faster new market as default
- dropped support for Umaro and Tiamat Kernel
+ EliteKernel 111224
+ major performance improvements
+ SmartassV2 governor
244
!+ new Opera tweaks
!+ wifi sleep fix
!+ updated settings template for 2.3.7
+ new GPS driver
+ camera fixes
+ performance and battery tweaks
+ updated all bundled apks
+ fixed goggles and youtube
+ new superuser + binary
227
+ loads more speed
+ dramatically reduced stuttering under heavy load
+ highly optimized Opera for butter-smooth browsing (tweaks for full wipe only)
+ QuickPic is now default gallery
+ set K9 mail as default email app
+ re-based on latest nightly, obviously
+ more
209
+ fixed camera effects
+ updated DSP speaker profile
+ some performance tweaks
+ support for Virtuous OC daemon (install SetCPU to disable it, uninstall to enable)
+ default undervolting profile (for people who don't care, the tailored real deal is far better)
+ default market is now the old one to prevent problems on non-us locales
186
+ first public release (CM7 nightly #186 + Umaro 1.0.6)
Click to expand...
Click to collapse
Changelog
NIKER's UnderVolting Tools Manual
Friendly warning: If you use this guide with any ROM or Kernel other than EliteMod and need to ask a question here - mention your ROM and Kernel in your post or I can't help you.
Be aware: This guide and the default voltage file assume you are using EliteKernel, other kernels will require different starting point voltage table.
Introduction:
By undervolting I mean decreasing voltages at which your CPU operates on specific frequencies.
If done properly, this can lead to dramatic increase of battery life with no performance loss, it also decreases CPU temperatures.
If done wrong, this can lead to freezes, graphic stuttering under heavy load or unability to boot without reflashing. Do a nandroid backup NOW!
I take no responsibility for your modifications, burned CPUs due to too high voltage and/or frequency, data loss, nuclear explosions, your girlfriend breaking up with you etc. You know the drill.
You should know this takes time - a lot of time. I spent 3 long evenings optimizing my table but I didn't have these tools to help.
You should also know this has to be done just once and you can reap the benefits of insane battery life with any ROM or kernel that supports undervolting - forever.
Essentials:
I am assuming you have a Windows PC at hand. SetCPU installed (disable profiles and on boot for safety), YouTube installed and Angry Birds or similar graphically intensive game of your liking for stability testing.
Next download the UV_TOOLS package I provided above, extract it somewhere and let me explain what each file does:
tools folder just contains ADB essentials and a simple free unix-capable text editor
voltages.txt - this is THE file you are going to edit and consequently THE file you never want to lose after you are done.
voltages.default.txt - this is a copy of the starting point for your convenience
start_edit.bat - this will open the voltages.txt file in an improved text editor capable of unix line endings, we are going to use this editor to make modifications to the voltage table within voltages.txt. Windows notepad is not sufficient for this task!
undervolt_temp.bat, undervolt_temp_periodic.bat - these two files are your best friends, they will push the voltages.txt to your device and apply it temporarily. It's effects will be lost after reboot. Periodic variation will push the file every 10 seconds, allowing you to always have the latest saved version of your voltage table on your device. Some may prefer the normal variant that will only re-push on a keystroke.
undervolt_persistent.bat - be careful with this baby, it does the same job as undervolt_temp.bat, but permanently so, simple reboot will no longer save your ass after you use this. You don't need to wait until you have all 4548648 frequencies optimized but do not use this unless you are pretty sure you have a stable voltage table.
remove_screwup.bat - did you just use undervolt_persistent.bat and your vision threw it back in your face and wouldn't boot? This will save you - 100% guaranteed.
Step by step guide:
First send your girlfriend to sleep, get a huge cup of tea, kick back, run a movie and connect your device, this is gonna be a long night and a lot of reboots.
Do a nandroid backup. Copy it to your PC, **** happens and we don't want that.
Run start_edit.bat - voltages.txt will open, this is not the stock voltage table, it is my own table with +25 overvolt added to every entry. Let's take a look:
Code:
echo '245760 900' > ./vdd_levels
...this says that for frequency of 245MHz the voltage will be 900mV. Valid voltages for vision are ranging from 750 to 1525.
Our objective is to find the LOWEST stable voltage for each frequency (yes - I know there's a lot of them). If you set it too low, your device will freeze and you will need to pull the battery and reboot (suggest removing your battery cover now). Too high frequency should not freeze your device but they will increase operational temperatures slightly and of course battery drain.
As I said the provided voltages.txt is specific for my device with slight overvolt, so let's see if your device can handle it or not - run undervolt_temp.bat to push and activate the default table. SetCPU to 122-1036 ondemand. Now if by now the device haven't froze, it's a good sign.
Next step we will test stability - connect to wifi and disconnect charger. Run youtube app, run a demanding test video with high quality - in high quality mode. The video should not stutter weirdly and the device should not freeze. Actually everyting should be pretty much normal. After 30s try to run your game instead for a half minute. After that hit the power button, let the device sleep for 30s and then try to wake it from standby. Should any of these steps fail, edit the voltages.txt, increase all the voltages by 25, push the changes and try the stabily test again.
Everything went smoothly? Well congratulation, you have taken the first step towards awesomeness. These settings should already improve your battery life compared to stock.
But we want moar battery! There's never enough when it comes to battery life. Well here it comes.
Take frequency 122880, it is the lowest ever used by your device out of standby. We currently have it set to 825, so let's try 800. Save the file and push the voltages to the device if you're not using periodic updater. Now SetCPU to 122-192 ondemand- it will be slow and tedious, frequencies below 768 can't run videos well so just play with your device a bit and watch for a total freeze. Short freezes that fix themselves are to be expected at those speeds. The good thing is, if your device starts suffering from sleep of death - the culprit is most likely one of these two frequencies - remember that.
Everything went well? Set all frequencies below 122880 to 800 as well. If not, leave them all at 825. Going any lower than 775 is asking for a sleep of death - just don't
Don't forget to always save voltages (floppy button) and then push them using the bat or use the periodic update - otherwise your changes have no effect, obviously.
Now move to the next frequency 192000 and set it -25 to 850. Leave SetCPU at 122-192 ondemand- we always want two adjacent frequencies switching while testing - it is during this frequency change when the device is most likely to freeze. It also triangulates the problem to these two frequencies, making it easy to fix a problem. Test stability by whatever means - no videos yet. If everything works you can try for 825.
Do this for every frequency up to 768.
Undervolt 122-192 then 245-368 then 768-806.
By now you have the sleep frequencies covered and your device should last incredibly long on standby.
Now optimize each and every frequency up to the maximum you want to use on daily basis. For 768MHz and more use additional video stress test.
Hints:
Never lower voltage more than 25 at a time between tests.
Always test with ondemand between previous and current frequency to ensure stability.
Consequently never lower more than two adjacent frequencies in one step - and even that is unsafe (but twice as fast, obviously), missing one unstable frequency means long and tedious testing process to find the culprit - you have been warned so don't try to cheat
Best tests for stability are streaming movies, they stress every component to the limits much more than any synthetic test. Even when SetCPU stability tests succeed, video streams tend to have much lower tolerance for low voltages - the video will stutter before it's even low enough to freeze whole device, do not underestimate this. Also do not mistake buffer stuttering for a CPU problem, the device would eventually freeze if it's CPU, stay close to your wifi AP.
Secondary test could be a game that doesn't stress the device as much - that will test frequency switching. Angry birds worked well for me and its fun
SetCPU profiles:
when you've finally built your own stable undervolting table up to your maximum desired frequency, you can maximize the impact of your hard work on battery by aligning the max frequencies to your specific voltage peaks. (example: if there are 3 different frequencies stable on the same voltage, always use only the fastest of the group)
Does your table look like this?
Code:
echo '368640 875' > ./vdd_levels
echo '768000 875' > ./vdd_levels
In this case always use 768 instead of 368 in setCPU where possible!
Higher frequency will do same work much faster
and in turn the CPU can sleep longer - saving battery.
kewl thanks bud
Isn't umaro an older kernel? Why not use a newer kernel. Just curious
Sent from my HTC Vision using XDA Premium App
A month old kernel is not enough to justify one that is not tried and tested unless it offers something extraordinary. Besides it offers all features one could ever dream of. Smartass, greaselightning, undervolting, very granular OC steps and mainly great stability. If you have a better candidate I will gladly take a look
I've used tiamat kernel it's pretty good and should have vipermod now so you can control voltage
Sent from my HTC Vision using XDA Premium App
If we can't flash the Gapps over the ROM, then how are we supposed to use it properly? Are they included in the ROM itself?
Mardenator said:
If we can't flash the Gapps over the ROM, then how are we supposed to use it properly? Are they included in the ROM itself?
Click to expand...
Click to collapse
Probably prepacked already
Sent from my HTC Vision using XDA Premium App
Any type of screenshots?
nik3r said:
A month old kernel is not enough to justify one that is not tried and tested unless it offers something extraordinary. Besides it offers all features one could ever dream of. Smartass, greaselightning, undervolting, very granular OC steps and mainly great stability. If you have a better candidate I will gladly take a look
Click to expand...
Click to collapse
**** the haters. Bleeding edge is not always the best edge to have.
I'll check into this in the next day or two.
This is really fast, so far no problems except market. I had to replace the new market with old one because it was force closing within 15 seconds whenever I opened it. Anyone else having similar issue with new market? I seem to have it on ILWT cm7 too.
Other than that, I think I'll keep this rom for awhile. Will see about battery life..
Sent from my HTC Vision using xda premium
miksa666 said:
This is really fast, so far no problems except market. I had to replace the new market with old one because it was force closing within 15 seconds whenever I opened it. Anyone else having similar issue with new market? I seem to have it on ILWT cm7 too.
Other than that, I think I'll keep this rom for awhile. Will see about battery life..
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
same market issue here, anyway the new market has never worked for me on cm7.
the rest is quite flawless, ill see how my battery does later and report back.
That is an old issue and it had an easy fix. If I remember correctly all you had to do was change the language of the system to "English US" in Settings->Language&Keyboard. It happened to some people on CM based roms, not sure about other roms.
tsubus said:
That is an old issue and it had an easy fix. If I remember correctly all you had to do was change the language of the system to "English US" in Settings->Language&Keyboard. It happened to some people on CM based roms, not sure about other roms.
Click to expand...
Click to collapse
go it working right away. thanks for the tip!
Does any body have a quadrant score for this rom yet? just curious.
Quadrant is not the best way to determine anything else than gaming performance but just fyi I reached 3000 points at 1440MHz @ performance, didn't bother to try more.
EDIT: Curiosity got the better of me - 3591 points at 1.9GHz.
The market issue is weird, I am not EN-us myself and it never acted up. I can provide old Vending.apk in flashable form if you want.
As for the screenshots argument - its your regular CM7, nothing special visually except LP.
AWESOME!
This is by far the SMOOTHEST, FASTEST, SEXIEST rom i have ever flashed and i have been lurking for a really long time. Thank you so much for this ROM.
Will try your rom.
would quake3 (kwaak3) timedemo benchmark be a decent way to test gains? I know it's mostly video but still, how to tell between roms?
Sometimes I want to be able to see an actual speed difference from the roms than just placebo effect but it seems hard to find the right benchmark..
Thanks
eagerly waiting for the next CM7 nightly to play some more with it but looks like the automatic compiler has some problems.
kaijura:
Graphic benchmarks will not tell you much about day to day performance.
You need to take storage and sdcard r/w speeds, governor's ability to scale the CPU properly and garbage collecting efficiency into account to tell the difference - they have all been tweaked for better experience in this ROM. Synthetic benchmarks just can't test all of that.
Ok guys i have got permission to bring over lean kernel and offer support for it on xda. I will keep this post up todate with all the most recent kernel updates and news. All credit goes to imoseyon as the original op and rootzwiki for original posting. I am posting this with full permission and support from imoseyon
Mod Type:: Kernel
Difficulty:: Very Easy
Mod Status:: Stable
Apply In:: CWM Recovery
Requires Root:: Yes
Exp builds are also up and includes a bunch of Android/OMAP updates not in stable.
SOURCE:
ICS
JB
This is a minimalistic Galaxy Nexus kernel. My philosophy is to keep the kernel as lean and stable as possible, at the same time to keep the kernel as modern and close to latest mainstream linux as possible. You will see that my kernels will lack some of the bells and whistles from other kernels.
sorry host4droid is still down. Mirrors:
kk4.4 LK 9.0 beta (use at ur own risk)
JB4.3 [ stable builds | exp builds ] [ change log | exp changes ]
JB4.2:Stable
Stock JRN84D kernel
Terminal Emulator not finding scripts? Read this post.
CHANGE LOG JB 4.2
FEATURES
Patched to latest in Linux 3.0.x branch.
All unnecessary kernel components removed to make kernel lean and fast!
OC to 1.65ghz. Boot speed is maxed at 1.2ghz within kernel (in addition to ramdisk) for stability.
User voltage control
InteractiveX V2 (screen-off hotplug of cpu1) added. Select it using setcpu if you want to use it.
Ramdisk tweaks (sysctl, vm, filesystem speed, etc.)
SWAP & zram (next generation compcache) support. Run "zram enable" in terminal.
init.d support in ramdisk.
lk.conf for basic kernel configuration.
HotplugX governor (Hotplug optimized and modified for screen-off suspend).
wakelock tweaks for wlan and lte modem
lkflash - script to flash latest versions of leanKernel from Terminal (type "su" without quotes, hit enter, then type "lkflash" without quotes and then hit enter)
checkv - voltage checking script (for custom undervolting) - detailed at bottom of this post.
checkt - script that displays 1) your current temp, 2) # of times you were throttled due to temp "recently", 3) CPU trim type, and 4) CPU silicon type, etc.
Fast USB charge (by chad0982) and "ffc" toggle script by me. (Open terminal, and type "ffc" without quotes then enter)
ColorControl from both CM9 and Ezekeel (compatible with all ROMs). Helpful posts: 1and 2.
TempControl - sysfs interface to control the CPU temp threshold. Read these two posts: 1 and 2.
Variable GPU OC - sysfs interface to select GPU max speed between 307MHz (stock), 384MHz and 512Mhz. The changes take effect immediately. Check FAQ for more info and how to use it.
Custom SR Tuning - override kernel default minimum voltage for SR calibration.
SoundControl
Gamma Control
ROW scheduler v4
DIRECTIONS
Uh.... flash the zip in clockworkmod.
Thanks to forum member maddler for providing file hosting
FAQ
How do i change voltage? - Use the latest version of setcpu, leantweaks, cputuner, or your ROM's built-in tools.
Do i need to wipe dalvik/cache? - in general there's no need, but it doesn't hurt so if you have time go ahead. Posted Image I don't wipe.
Can we OC higher or add more frequency slots? - You can find the extra slots in my experimental versions.
Will this work on GSM gnexus as well? - It should. I don't have a GSM phone to test so let me know if it stops working.
What is interactiveX V2? Read this post and thttp://rootzwiki.com/topic/13092-kernel-leankernel-minimalistic-kernel-120-123111/page__view__findpost__p__342571
Are you getting Screen-Off/Sleep-Of Death (SOD), general instability, or unusual battery drain?
Before you post here (especially if you're running the experimental version), try the following steps in order:
0) dude, disable screen-off profiles if you're running interactiveX.
1) If you're running the experimental version, do you have 180mhz/230mhz and/or 1.42ghz slots enabled? If so disable them both!
2) If the above doesn't help, do you have custom undervolting enabled? If so disable it! (keep in mind that the kernel is already undervolted by default).
3) If the above doesn't help, are you using interactiveX or hotplug governors? If so change to interactive.
4) If the above doesn't help then you should not be running the experimental version. Install the stable version and try both interactiveX and interactive without custom undervolting.
If you're still getting SOD with stable/interactive, report it here.
What about call-recording? - First the app needs to support Galaxy Nexus. Find out if it does and then find out from the author of the app what kernel changes are required and let me know.
Should i set up screen-off profile? - ICS kernels have built-in screen-off profile for all governors at 700mhz. So you don't need it unless you want to set it lower than 700mhz. In general there isn't a whole lot to gain by setting it lower.
Hotplug vs interactiveX? - Read this post. HotplugX vs interactiveX
What is zram and why do i need it?
zram basically takes a portion of your RAM (10% using my script) and turns it into a compressed swap device. So in layman's terms you're extending the size of your memory (potentially from ~700mb to close to 1000mb depending on the compression ratio).
To answer the 2nd question, no you don't really need it but if used properly (using custom LK zram script) it could help you in two different ways:
1) Android OS is based on Linux OS and the OS will try to use a growing portion of your RAM for file and inode caches and if you keep your phone up without rebooting after a while you may notice things getting a little sluggish. That's because the OS is not doing a good job in dropping the caches and freeing up memory for the apps.
2) more RAM and tweaked minfree (also handled by custom LK script) could potentially allow your apps to stay in memory longer (this may or may not be desirable based on your preference of course).
In conclusion, I'd say if you're curious it doesn't hurt to try. To revert, just type "zram disable".
What's the low-down on the GPU OC?
My kernel's GPU is now set to stock 307Mhz by default. You can adjust that by using Variable GPU OC (see a separate FAQ entry below).
When you go from say 307 to 512Mhz, you will not experience near double performance increase. Due to the factors outside the GPU module (ie. memory bandwidth limitation), you can't truly OC the GPU. In fact, most people can't tell the difference between 307, 384 and 512. Nenamark2 will roughly give you the following scores: 307/25fps, 384/28fps, and 512/31fps.
Some of you have seen the note from Colin, the Google kernel engineer, not to OC the GPU because using the OV_UV voltage slot will drain the battery. My kernel uses the same voltage for both OV and OV_UV slots. So there's no danger of battery drain there.
Why are the IO benchmark test scores lower than another kernel?
Some of the kernels out there have fsync disabled to increase benchmark scores. I believe that is unsafe and could cause data corruption. I do have hooks in my kernel to disable it but I don't use it.
In real world there will not be any user perceivable difference whether you have fsync enabled or disabled.
Is there a way to tune hotplug via sysfs?
yes. Advanced users only!
My phone doesn't seem to be deep-sleeping, what gives?
(assuming you checked in the right place like cpuspy) In terms of deep-sleep, there's not a whole lot going on in the kernel. It works or it doesn't - and I can assure you that I test every release (well almost every release) for deep-sleep before I release.
19 out of 20 times it's either 1) some sort of background process that's preventing your phone from going into deepsleep, or 2) something's misconfigured in your ROM, or both. Also connecting to USB will prevent phone from going into deepsleep.
I'm having unusual battery drain - help!
First of all, our gnex has very poor battery life while in active use. It's downright horrible while screen is on - screen is definitely the main culprit and there's not a whole lot I can do about that.
Custom undervolting can help or can hurt. This is mainly due to SmartReflex (class1.5) which auto-calibrates the ideal voltages for you. In fact, with SR you don't really need to use the custom undervolting feature for frequencies other than the 2 lowest. It does a great job calibrating higher frequencies. I personally don't touch it.
The "notrim" versions are an exception because I had to disable SR1.5 for the trim override to work. There's no auto-calibration going on there. Feel free to mess with custom undervolting on the notrim versions.
Now, if you've already accepted the horrible battery life while screen is on, but have questions about battery drain while idle - read the next question.
I'm having unusual battery drain while screen is off, or phone is sleeping - help!
First, let's find out if you're phone is going into deep-sleep. Install CPUSpy, unplug phone, turn off screen, and leave the phone alone for 5-10min. Turn the screen back on, launch CPUSpy, and see if you see an active entry for Deep Sleep. If so congratulations - read on.
If you've determined that your phone is not entering deepsleep by using the above method, read my entry above that says "My phone doesn't seem to be deep-sleeping". I've heard that removing SDM.apk helps as well as rebooting the phone. Also try turning your bluetooth on and off, and launching camera app and closing it.
If you've determined that your phone is entering deepsleep fine but still feel like battery drains, read the next question.
I'm having unusual battery drain while phone is in deep-sleep - help!
First make sure you are absolutely positive that deep sleep is working (read the previous question).
While on my kernel *and* connected to Wifi, you shouldn't drain more than 1% battery per hour *average* while in deep sleep (based on 5-8 hour continuous deep sleep). With wifi turned-off, my guess is probably no more than 1-3% per hour, depending on signal strength.
tip 1: If above is not happening for you, first charge the phone all the way and reboot. Let things settle a bit - give it a day or so. If you're using Battery Monitor Widget (which is not accurate for gnex), things should eventually settle between -2mA and -60mA per sample.
tip 2: Install BetterBatteryStats and look at which wakelocks dominate. Google search for names of the wakelocks to see how you can fix them.
tip 3: http://checkthis.com/d87t
If nothing seems to help, you can try the "notrim" version, but stick to speeds between 350 and 1350 (don't use OC slots). The notrim version has SR1.5 disabled which could help for those of you with drain issues on my other kernels.
What is tempcontrol and how do I use it?
First, read these two posts: 1 and 2.
Although tempcontrol was designed to be used with the experimental notrim builds because the cpu gets hotter in notrim frequencies, you can actually use tempcontrol to throttle lower frequencies. I haven't tried myself, but theoretically you can set your top speed at say 1.2Ghz and use tempcontrol to throttle at say 60C (instead of the stock value of 63C) resulting in slightly cooler phone. Theoretically.
What is SmartReflex?
SmartReflex performs continuous dynamic voltage scaling around the nominal operating point voltage according to silicon characteristics and operating conditions.
My stable and experimental builds will have SR Class 1.5 enabled by default.
You can disable SR via sysfs
How do I use Variable GPU OC?
You can use Lean Tweaks by Jake, or use the built-in "oc" script. Both leantweaks and my oc script will create an init.d script so the setting sticks at boot. My "checkt" script will also show the current GPU max speed. Note that 512MHz will probably not work for everyone.
307Mhz (stock) is set default by the kernel.
Open Terminal, and type for stock speed of 307Mhz: oc gpu 0
for 384MHz: oc gpu 1
for 512Mhz: oc gpu 2
What are the available sysfs options?
Check this post (thx byrong)
Which governor should I use on JB?
As usual I'd recommend trying all the governors and see which one works best for you. Stock JB, however, is optimized for interactive. The OS will automatically modify various interactive governor parameters on the fly while you're using the phone as part of "project butter". Namely, the following parameters are constantly adjusted by the OS: boostpulse, timer_rate, min_sample_time, hispeed_freq, go_hispeed_load, and above_hispeed_delay.
I hope this helps people if there is any other information you might want added just ask and i will do my best to come up with a comprehensive guide.
Donate to your favorite charity, or donate to imoseyon.
Did you ask Imoseyon before you posted this?
Thanks for bringing the thread over to XDA. Hopefully you got the necessary permissions, for the sake a peaceful thread. Its good to have most developments of the GNEX here and I finger tip away.
Sent from my Galaxy Nexus using xda premium
I've heard a lot about this kernel!
yes this is with his permisson
ajf64 said:
No i didn't ask him but i did put all due credits in it and it is in every other gnex forum but the sprint one all brought over by other people so if he has a problem with this he can feel free to pm me and i will get it removed i just figured it give us some easier access to his great kernel. In no way am i claiming this to be my work all support should be directed at the original thread op. I was just trying to make access to his kernel a bit easier for all xda users
Click to expand...
Click to collapse
That's all hunky dory but just doing things without asking the developer is just not right. Regardless if he has an issue or not. Its like you make something you work diligently on and then somebody just posts it somewhere else.
I dunno maybe its just me but its just common courtesy.
Sent From My Toro+ via SkyBlue Tapatalk
Thanks op.
#inb4close
#ReOpened
Sent from my Galaxy Nexus using Tapatalk 2
all fixed
ajf64 said:
well then sorry for posting it will a mod please delete this thread before it becomes a flame pit
Click to expand...
Click to collapse
Doesnt need to be deleted.. if just ask him if its alright.. thats fine enough
ÜBER™ said:
Doesnt need to be deleted.. if just ask him if its alright.. thats fine enough
Click to expand...
Click to collapse
Why do you always ruin the flaming? With your...good nature...and your rap music.
Thanks for linking. You can still ask dev for permission but I get what you're trying to do. I prefer xda since this is where I have gotten help with every phone since my nexus 1.
Sent from my Galaxy Nexus using XDA Premium HD app
Well i have gotten permission to post this from imoseyon and to keep this thread updated on xda sprint forums for him so it looks like we are all set he got back to me alot faster then i thought he would so every thing should be all good guys
and yes jayare313 i am so used to finding every thing i need on xda some times it s a pain having to check 3 or 4 sites to see if any of your mods for your rom are updated
Sorry. 3 issues here:
1) I need to verify permission from the developer and he needs to verify that he is going to support it here. If someone downloads it, flashes it, and somethings wrong.......who is going to give answers and support it? We have an active community who can help, sure, but the developer has to actively support it here. If he were ready to give support here, he would have posted it here already. And even then it would have to go in general unless he started the thread.
2) There is no source provided in the OP. Kernels must be GPL compliant and listed in the OP.
3) If you did not create it, do not post it in the development section.
Alrighty. Everything should be good now. I'll be keeping an eye out.
OP will be updated soon, with source and I've spoken to the developer.
Thank you guys.
---Jay--- From the GNex
Well, I will say I like having this thread here. So thanks to the op.
Sent from my Galaxy Nexus using Tapatalk 2
I will be updating the thread when i get home today and be offering any support you guys may need for this kernel
MichaelMcEntire said:
Well, I will say I like having this thread here. So thanks to the op.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I totally agree. Thanks to OP for the thread and imoseyon for the kernel
Sent from my Galaxy Nexus using xda premium
Np guys any time and if there is any thing i can help with just ask i plan to provide full support for this kernel. Also if there are things you wish to have added feel free to post them as well i have permission to compile my own versions of lean kernel with cherry picked features from his repository and to add features to it. I look forward to your feedback.
is 4.2 jb cm10 compatible
twoeleven99 said:
is 4.2 jb cm10 compatible
Click to expand...
Click to collapse
Yes
Sent from my Galaxy Nexus using xda app-developers app
Welcome to decimalman's kernel playground!
As the name suggests, dkp is a hodgepodge of features and tweaks that I wanted to play with. It should get excellent battery life without feeling sluggish. It doesn't come with its own tuner app, so pick your favorite. Personally, I like Trickster MOD and Kernel Adiutor, so I go out of my way to make things work in them. Most other apps should work, too.
Features:
Overclocking up to 2.1 GHz, but you'll need to increase your voltages to get there (if you can get there at all)
Underclocking down to 54 MHz, with stability improvements
Undervolting compatible with most apps
Fast charge without unplugging first
Glorious animations for the notification and softkey LEDs
Well-integrated erandom means you don't need CrossBreeder or Seeder (recent AOSP builds use ISAAC instead)
freelunch and tierservative governors for optimal battery life without sacrificing responsiveness
Automatic mpdecision and auto-hotplug are only enabled when needed
Adjustable minimum voltage for stability on finicky processors
Optimized UKSM to free up some extra memory
Code optimizations for size and speed
Compiler optimizations (-O3, LTO, and more) because faster is better
Donors: Thanks, everyone! Your generosity is much appreciated. :good:
drpenguino, 0xScott, vmancini3 (twice! :good, Ch4m3l30n, rompnit, Mystique, ryandubbz, techdog, ElwOOd_CbGp, ScOULaris, ZipAddict
Remember:
Nandroid!
last_kmsg and/or logcat or it didn't happen.
Other kernels have their own threads or forums. Discuss them there.
Image dumps (settings, battery life, whatever) belong inside [HIDE][/HIDE] (that's HIDE, if you're on the mobile app) tags.
Be silly. We're here to have fun.
Installation:
Reboot to recovery. I recommend that one recovery...you know, the one that flashes zips? I forget what it's called.
Flash dkp. Optionally, rename and flash dkp-vmin-XXX.zip (see below).
Reboot.
Undervolting:
Undervolting on dkp is more complex than other kernels. Some processors get unstable at lower voltages, so (like the stock kernel) dkp keeps the processor voltage above 1150 mV by default. I refer to this limit as the minimum voltage. In order to undervolt, you'll need to lower the minimum voltage: if you use Trickster MOD or Kernel Adiutor, just disable "Override Minimum Voltage", otherwise rename dkp-vmin-XXX.zip to e.g. dkp-vmin-600.zip (which would apply a 600 mV minimum voltage) and flash it. If this causes instability (crashes, audio/video glitches, etc.), try using dkp-vmin-XXX.zip to apply a higher minimum voltage (somewhere between 950 and 1050 mV seems to work well for most people).
Downloads:
MediaFire:
All Downloads
dkp-vmin-XXX.zip
Solidfiles (Make sure you have an adblocker!):
All Downloads
dkp-vmin-XXX.zip
Source: I'm always happy to see my code used, so cherry-pick away. I'll even put together feature patches if you ask nicely.
Bugs:
Let me know.
Stable changelog:
3/3/13: Initial release for d2spr. Didn't get around to making threads for other carriers.
4/8/13 (3.0):
FauxSound support
Strip more useless stuff
A few bonus optimizations
4/8/13 (3.4):
Port everything except erandom from 3.0
Enhance cpufreq for easier configuration
4/24/13 (3.4):
Bugfixes: better support for tuner apps, fixed potential SOD bugs, automatic mpdecision fixups, etc.
Lots of CM/CAF/Linux updates
Working AssWax governor
Trinity colors support
sio, zen I/O schedulers
erandom is back!
Built with a super-fancy Linaro GCC 4.8.1-dev compiler toolchain for maximum -O3 goodness
Probably lots more, but there's hundreds of commits to sort through...
5/29/13 (3.4):
Bugfixes: better overclocking support, better hwrng support, etc.
Updates: new CM updates, Linux 3.4.47, updated FauxSound driver, added invisiblek's new panel colors interface
Automatic auto-hotplug
New optimizations, including link-time optimization and an updated GNU+Linaro GCC 4.8.1-dev toolchain
6/14/13 (3.4):
Bugfixes: fix several critical bugs in the 5/29 release.
9/7/13 (3.4):
Fixes for OC, UV, auto-hotplug.
A few new optimizations.
Synced up with CM.
9/20/13 (TW):
Ported everything from AOSP to TW.
9/20/13 (4.3):
Merged 4.3 from CM into the existing 4.2 code.
Current experimental branches:
Nothing interesting at the moment.
Goodies:
dkp doesn't come with its own splash screen. However, the dkp installer (i.e. the install zip) is smarter than you think, and can apply a custom splash screen for you. Here's how:
Create a folder on your internal storage named "dkp"
Copy a PNG image into the directory, and rename it "splash.png". Alternatively, copy an RLE image (i.e. from a flashable custom splash screen zip) and rename it "splash.rle". Ideally, the image should be roughly 1280x720 to begin with, since it won't be resized.
The image will be used as your splash screen whenever you flash dkp. Reflash to apply initially.
mikedavis120 has put together a how-to video that covers tweaking dkp for optimal battery life. If you're new to dkp, take a look! He also put together a zipped collection of apps that will come in handy while tuning dkp. It also includes a flashable zip, "dkp-debug_v1.zip". After flashing it, running
Code:
su
dkp
from a terminal emulator will collect lots of useful debug information that will make it much easier for me to track down the issue you're having. :good: mikedavis120 recommends installing SuperSU (included in the zip) instead of what's included in you ROM.
sysfs:
It's possible to adjust all the settings available in dkp without using apps. Because they show up as files, settings can be adjusted with file managers, terminal emulators, adb and initscripts. Here's the most interesting files inside sysfs:
/sys/devices/platform/mipi_samsung_oled.513/lcd/panel/panel_colors (not available on newer AOSP builds): display tint (0 = very red, 2 = default, 4 = trinity colors)
/sys/class/misc/gammacontrol (only available on newer AOSP builds): various color controls. See this post for details on enabling Trinity colors on builds that use these controls.
/sys/devices/system/cpu/cpu<N>/cpufreq/UV_mV_table: voltage table
/sys/devices/system/cpu/cpu<N>/cpufreq/scaling_...: scaling_governor is the governor, scaling_min_freq and scaling_max_freq are the minimum and maximum frequencies, scaling_available_governors and scaling_available_frequencies show the available governors and frequencies
/sys/kernel/dkp/force_fast_charge: fast charge
/sys/kernel/dkp/link_core_settings: when linked (the default), frequency settings and some governors are automatically copied to the other core
/sys/kernel/dkp/vmin: minimum processor voltage in mV
/sys/kernel/mm/uksm/run: activate UKSM
auto-hotplug tuners:
These show up in the governor settings for any governor that doesn't do its own hotplugging. They only take effect when using auto-hotplug, so you'll probably need to disable mpdecision in Trickster.
hotplug_intpulse: when set to 1, automatically turns core 2 on whenever the screen/buttons/whatever is pressed. Default is 0.
hotplug_sampling_periods: number of samples to use for average number of running tasks. Default is 15.
hotplug_sampling_rate: number of 'jiffies' (currently 1 jiffy = 10 ms) between each sample of running tasks. Default is 20 (0.2 sec).
hotplug_enable_one_threshold: the average number of running tasks required to turn core 2 on, multiplied by 100. Default is 125 (1.25 tasks on average).
hotplug_disable_one_threshold: the average number of running tasks required to keep core 2 on, multiplied by 100. Default is 250 (2.5 tasks on average).
freelunch/nanolunch tuners:
freelunch and nanolunch aren't materially based on other governors, so their configuration is quite different than other governors. There's lots of tuners, since I haven't really decided on an ideal tuning. I encourage experimentation! I'll explain a bit of how these governors work before actually listing the tuners.
Generally speaking, there are two modes: in "normal" mode, sampling is done occasionally and frequency is generally increased slowly; in "interactive" mode, sampling is done much more quickly, and frequency increases much more quickly. "Interactive" mode ends after several samples of very low usage. The idea of a "hispeed" frequency is used in lots of governors, and it refers to the frequency that the CPU will jump to when more CPU usage is needed; generally, it's a generous estimate of how much CPU will be needed. Here, the hispeed frequency is adjusted on-the-fly, increasing when more CPU is needed and gradually decreasing when the CPU is idle. In "interactive" mode, the hispeed frequency is kept fairly high so that everything will feel snappy.
Hotplugging is taken care of in the least complicated (and in my opinion, most reasonable) way possible: if core 1 is using lots of CPU, and there are several tasks running (in other words, if it's likely that core 2 will have something to do), core 2 is turned on; if either core isn't doing much except using power, core 2 is turned off.
sampling_rate: the usual
hotplug_up_cycles: number of consecutive heavily-loaded samples before core 2 is turned on
hotplug_down_cycles: number of consecutive lightly-loaded samples before core 2 is turned off
hotplug_up_load: number of running tasks required to bring core 2 online
hotplug_up_usage: number of used CPU cycles (in thousands per second) required to bring core 2 online
hotplug_down_usage: number of used CPU cycles (in thousands per second) required on both cores to keep core 2 online
overestimate_khz: number of CPU cycles to overshoot usage by in "normal" mode
hispeed_thresh: if CPU usage is within this many cycles (in thousands per second) of the maximum frequency, frequency will be increased to the hispeed frequency. Generally, hispeed is pretty low in "normal" mode, and fairly high in "interactive" mode.
hispeed_decrease: when the CPU is sitting idle, the hispeed frequency is decreased by this amount each sample (this isn't ideal, but it works)
interaction_hispeed: the initial hispeed frequency when switching to "interactive" mode
interaction_return_cycles: number of consecutive lightly-loaded samples before returning to "normal" mode
interaction_return_usage: number of used CPU cycles (in thousands per second) required to stay in "interactive" mode
interaction_panic (nanolunch only): when set to 1, allows aggressively jumping past the current hispeed frequency under some circumstances
interaction_sampling_rate/overestimate_khz: equivalent to the "normal" versions of the tuners, these take effect in "interactive" mode
Just loaded it on pa 3.15
Sent from my SAMSUNG-SGH-I747 using xda premium
It doesn't say that it has morfic colors, but looks like it does. Gonna give it a whirl
Sent from my SGH-I747 using xda app-developers app
rmead01 said:
It doesn't say that it has morfic colors, but looks like it does. Gonna give it a whirl
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It doesn't, but I'll merge it and put out a test build.
decimalman said:
It doesn't, but I'll merge it and put out a test build.
Click to expand...
Click to collapse
Is it possible they are left over from a previous kernel? Because I can def tell the difference usually and seems like it does.
Either way, advise when its updated. This governor seems solid so far.
Sent from my SGH-I747 using xda app-developers app
rmead01 said:
Is it possible they are left over from a previous kernel? Because I can def tell the difference usually and seems like it does.
Either way, advise when its updated. This governor seems solid so far.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
dkp is based off clean CM source, so it shouldn't have been merged already.
I've got test builds compiling now, and the 3.4 builds will be up shortly. Flashing the trinity-colors test build and this zip will enable trinity colors. You can toggle it with
Code:
su
echo X >/sys/class/mdnie/mdnie/trinity_colors
where X is 0 to disable or 1 to enable.
Edit: and sorry for taking so long to respond.
Edit 2: 3.4 builds are up. http://d-h.st/7Ae
Thnx for this kernel
decimalman said:
dkp is based off clean CM source, so it shouldn't have been merged already.
I've got test builds compiling now, and the 3.4 builds will be up shortly. Flashing the trinity-colors test build and this zip will enable trinity colors. You can toggle it with
Code:
su
echo X >/sys/class/mdnie/mdnie/trinity_colors
where X is 0 to disable or 1 to enable.
Edit: and sorry for taking so long to respond.
Edit 2: 3.4 builds are up. http://d-h.st/7Ae
Click to expand...
Click to collapse
Maybe I was just seeing things, had just watched jurassic park in 3d.
New "test" build flashed as well as the file to enable it. Thanks for the addition. It's very hard to go back to normal once you've been smurfed depending on your display.
Only issue i'm having ATM is the ability to change the voltage table. My phone doesn't handle undervolting as well and i run a minimum of 950 baseline, if not 975. One of my normal apps wasn't able to set the voltage at all. I'm trying to use performance control which I don't like. It crashes trying to set the voltage on boot but at least I can go in and manually set the values on boot and they stick.
One last question, since this is your kernel, what scheduler do you recommend pairs well to freelunch? What would you use for performance and what would you use for batt?
rmead01 said:
One last question, since this is your kernel, what scheduler do you recommend pairs well to freelunch? What would you use for performance and what would you use for batt?
Click to expand...
Click to collapse
+1 on these questions
Sent from my AT&T Samsung Galaxy S III
rmead01 said:
Only issue i'm having ATM is the ability to change the voltage table. My phone doesn't handle undervolting as well and i run a minimum of 950 baseline, if not 975. One of my normal apps wasn't able to set the voltage at all. I'm trying to use performance control which I don't like. It crashes trying to set the voltage on boot but at least I can go in and manually set the values on boot and they stick.
Click to expand...
Click to collapse
Answered my own problem. I installed trickster as mentioned in OP and all voltage settings stick no problem with no issues.
rmead01 said:
New "test" build flashed as well as the file to enable it. Thanks for the addition. It's very hard to go back to normal once you've been smurfed depending on your display.
Only issue i'm having ATM is the ability to change the voltage table. My phone doesn't handle undervolting as well and i run a minimum of 950 baseline, if not 975. One of my normal apps wasn't able to set the voltage at all. I'm trying to use performance control which I don't like. It crashes trying to set the voltage on boot but at least I can go in and manually set the values on boot and they stick.
One last question, since this is your kernel, what scheduler do you recommend pairs well to freelunch? What would you use for performance and what would you use for batt?
Click to expand...
Click to collapse
Personally, I don't like trinity colors, but I definitely understand the appeal. I merged this into 3.0 and 3.4, so it'll be standard from here on. I'll add a link to the enabler zip in the OP as well.
What app would you normally use? I'll try to support it, since I already provide several voltage interfaces. I didn't realize performance control was crashing (I'm not a fan either, so I only lightly tested). I recently installed Trickster and liked it, so I've been going out of my way to support it. It's also really easy to write support for, so that's a bonus for me.
As for schedulers, I'm not fussy. I've never exhaustively tested performance and battery life, so I don't have a preference and usually run noop or deadline. However, I've had nothing but bad results with ROW (phone never deep sleeps, and I haven't looked into why).
decimalman said:
Personally, I don't like trinity colors, but I definitely understand the appeal. I merged this in, so it'll be standard from here on. I'll add a link to the enabler zip in the OP as well.
What app would you normally use? I'll try to support it, since I already provide several voltage interfaces. I didn't realize performance control was crashing (I'm not a fan either, so I only lightly tested). I recently installed Trickster and liked it, so I've been going out of my way to support it. It's also really easy to write support for, so that's a bonus for me.
As for schedulers, I'm not fussy. I've never exhaustively tested performance and battery life, so I don't have a preference and usually run noop or deadline. However, I've had nothing but bad results with ROW (phone never deep sleeps, and I haven't looked into why).
Click to expand...
Click to collapse
good to know. Trickster mod works fine and you mention it in the OP and it's at no cost in the play store. I wouldn't worry.
I was using an app called kernel tuner because some others would only set 1 core to the governor and not both. I checked that trickster does indeed set both cores to freelunch so once that figured out I removed kernel tuner. Kernel Tuner also has the options for profiles which can be toggled in tasker for varies states. freelunch so far hasn't needed any changing so not worried about it at this point. just as an example, some governors would be better for screen on/off and tasker could switch these to edge out battery life.
The voltage app i was using is simply called voltage control. Kernel tuner doesn't do a nice job of voltage changes. But since trickster does both governor and voltage adjustments well. i'm using that with no problems now.
Thanks for the morfic, having a way to toggle it works well for people. it's as simple as a script so there's that.
rmead01 said:
good to know. Trickster mod works fine and you mention it in the OP and it's at no cost in the play store. I wouldn't worry.
I was using an app called kernel tuner because some others would only set 1 core to the governor and not both. I checked that trickster does indeed set both cores to freelunch so once that was made it was no problem. Kernel Tuner also has the options for profiles which can be toggled in tasker for varies states. freelunch so far hasn't needed any changing so not worried about it at this point.
The voltage app i was using is simply called voltage control. Kernel tuner doesn't do a nice job of voltage changes. But since trickster does both well, i'm using that with no problems now.
Thanks for the morfic, having a way to toggle it works well for people. it's as simple as a script so there's that.
Click to expand...
Click to collapse
I meant to test Voltage Control but Google wasn't letting me download anything. It's a common app, so I'll try to get it working regardless. Kernel Tuner doesn't currently work well with freelunch, and tends to hang when it's trying to read settings in the CPU screen. Otherwise, it's a nice app. I didn't realize it had Tasker support (I use Llama).
I've added a few extra bits to the cpufreq core, so governors that need to be set on both cores (like freelunch) will automatically apply to both cores regardless of what app is used. cpufreq will even enable and disable mpdecision depending on whether a hotplugging governor is running (though Trickster won't show that it's disabled).
I owe ktoonsez for the toggleable trinity colors. I slightly rewrote his patch, but it's still largely his code. It's my policy that anything that not all users will want should be optional and easily configurable.
Edit: I think I've got Voltage Control fixed. I should be able to get Kernel Tuner working without too much work. I haven't even looked into Performance Control yet.
decimalman said:
I meant to test Voltage Control but Google wasn't letting me download anything. It's a common app, so I'll try to get it working regardless. Kernel Tuner doesn't currently work well with freelunch, and tends to hang when it's trying to read settings in the CPU screen. Otherwise, it's a nice app. I didn't realize it had Tasker support (I use Llama).
I've added a few extra bits to the cpufreq core, so governors that need to be set on both cores (like freelunch) will automatically apply to both cores regardless of what app is used. cpufreq will even enable and disable mpdecision depending on whether a hotplugging governor is running (though Trickster won't show that it's disabled).
I owe ktoonsez for the toggleable trinity colors. I slightly rewrote his patch, but it's still largely his code. It's my policy that anything that not all users will want should be optional and easily configurable.
Click to expand...
Click to collapse
well good job so far. batt life has been top notch. minimal drain in use and my over night idle drain was only a few %. I have things setup to disable wifi when sleep and also turn off mobile data when wifi is connected. A bit over the top but every bit helps.
:good::highfive:
I know I've been grilling you today but...
Kind of curious what the new tunables do. I haven't touched anything since it's working so well but there is always that part of me that wonders what adjust parameters will do. Is there any kind of reference for this governor that could indicate that type of info?
Does your kernel support faux sound app?
stevehkim said:
Does your kernel support faux sound app?
Click to expand...
Click to collapse
Yes. 3.0 and 3.4 both have support.
As for tuneables, I've been meaning to post a writeup but haven't gotten around to it. You're not the first to ask about it.
Sent from my SPH-L710 using xda app-developers app
This is a fantastic Kernel! The battery life has been outstanding so far. Thank you for your amazing work!
This is a simple STARTER GUIDE to kernel features/parameters and everything you need to know about custom kernel goodies before you consider flashing them. I’d be glad if you could help me complete this guide. Thanks to @Shan89 for his fantastic guide which inspired me to collect this.
First of all I’d like to thank all kernel guys who put countless hours into this to bring us the features which I am going to explain soon. Especially: XMister, n3ocort3x, Kozmikkick, Maxwen, Showp1984, faux123, TripNRaVeR, Alex-V.
Overview:
Post 1:
A.: What you want to know about the CPU/GPU of your device
B.: Custom Kernel Features
Post 2:
C.: Built in kernel features with no user control
D.: FAQs (Frequently Asked Questions)
More coming Soon!!!
Post 3:
E. Repacking
F. Useful Tools and Guides out there
More coming Soon!!!
A: What you may want to know about the CPU/GPU of your device:
HOX is powered by nVidia Tegra 3 which is a Quad Core CPU and it is said that have a Core Frequency of 1.5GHz. Also nVidia Tegra 3 comes with ULP Geforce GPU which is at 520MHz in all custom kernels available. You may want to know that your HOX can go up to 1.5GHz of single core and 1.4GHz of 4cores active with Stock kernel (The kernel that comes with your device out of the box). However custom kernels can perform 1.5GHz for all 4 cores.
nVidia Tegra 3 is in fact a 5 core chipset. The Advertising hype was about its 4+1 cores. So what is that one extra core? That core is called LP (Low Power) core. When the phone is in idle (sleep) this core is used. It is a weak core with 475MHz of processing power. It is there to save battery life as when we are in idle we do not need a whole 1.5GHz core to be active.
B.1: CPU/GPU/IO Features which come with Custom Kernels:
•NOTE: Enabling/Disabling these features are explained in the kernel forums. Here is a very simple example to get you up and running so that you don’t feel lost.
In the kernel forum it is said:
To enable S2W:
echo ‘1’ > /sys/android_touch/sweep2wake
So what on the earth does that mean?! It means install a terminal emulator program on your device (Here’s one). And then run it. First type “su” without the quotation marks and hit enter. It will ask for Superuser privileges. Grant it. Now type in the line above echo blah blah blah and hit enter. And bam! There you go, S2W is enabled. Always be advised that ‘1’ means enable and ‘0’ means disable.
Click to expand...
Click to collapse
OC/UC (As for OverClock/UnderClock):
As you may know, CPU or any other processing unit features a clock frequency. Over/Under Clock simply means raising/decreasing the clock frequency of CPU.
Reason: Why would one need to overclock? Because one needs more processing power. For example if you want to experience smoother graphic when playing high-graphic games.
Why would we need underclock? Higher processing power demands more battery. So underclocking helps us, reserve more battery. As for HOX, searching internet and texting don’t need much of processing power. So we can limit the processing power and save battery during low use of our device.
•Note1: OC/UC is not limited to CPU. GPU is also capable of OC/UC. And the interface for that is also available in the custom kernels of HOX.
•Note2: Gamers may not use GPU UC. Limiting GPU processing power impact significantly on your gaming experience.
UV (As for Undervolt):
Every frequency of a processing unit, demands a certain amount of power to be supplied. Undervolting to put it simple means decreasing the voltage of a certain frequency (or all of them).
Reason: The more voltage CPU/GPU gets, more heat will be generated. So mainly we UV to decrease the generated heat of CPU/GPU.
•Note1: One Frequency needs a certain minimum amount of voltage to perform correctly and the system be stable. Undervolting more than a certain amount of voltage will cause system instability.
•Note2: HOX is known for getting hot soon. So UV is a great workaround for your device to be cooler.
•Note3: UV does not impact battery life (or it is not noticeable).
•Note4: For ULTIMATE guide about Undervolting and safe values visit Shan89’s great guide here.
Separate X/Y OC interface:
This probably means that the kernel has separate OC interface (interface to control OC) for operation X and operation Y. To be more exact it means you can OC different values for X and Y.
Audio Min. Freq.:
This specify the minimum frequency of the CPU when Audio is being processed. Default min in custom kernels is normally 51MHz. But Audio needs some more processing power. Anyhow, with this you can change that value.
LP Core OC:
The name explains everything. OC for LP core of T3 chipset.
Reason: LP core uses very little battery. So as long as the phone stays at LP core, more battery will be saved. If LP is OCed, it means it can handle more complex processing tasks and can hold more before letting the device to wake main cores. So battery will be preserved!
•Note: These are work in progress features and mostly in beta releases of Kernels. So using may cause system instability and other issues. So use them if you know what you are doing.
Hotplug Control - NEW:
Hotplugging dynamically activates second CPU core ON on load conditions and turns second core OFF on low load conditions. (From here).
Click to expand...
Click to collapse
- first_level: The number here specifies the amount of load on the cpu for it to turn on all the available cores (4 cores online).
- cores_on_touch: This number specifies the number of cores to come online when you touch the screen. (2 is efficient, 4 for extra smoothness on touch, and so more battery drain.)
- suspend_frequency: When screen is off, you don't expect your device to be smooth (!!!) and snappy! Because mainly nothing important is happening when screen is off. The number here specifies the maximum frequency of the CPU when the screen is off. Screen Off Max CPU can be really a very low number.
CPU Governors:
Frequency scaling is the means by which the Linux kernel dynamically adjusts the CPU frequency based on usage of the device. Governors refer to schemes which dictate to the kernel how it should do these adjustments. (From rootzwiki)
To put it simple, Governors are the way that CPU frequency is adjusted according to the demand of operating system.
Selecting a proper governor for your CPU is crucial to the performance and battery preserving of your device. For example if you are low using your device you may use a more battery friendly governor and if you want to play games you may use a more power consuming performance governor.
•Note: See Shan89’s Great Guide about Governors to be familiar with each one of them and the ones that you should use in different situations here.
I/O Schedulers (As for Input/Output):
Input/output (I/O) scheduling is the method that computer operating systems use to decide which order block I/O operations will be submitted to storage volumes. I/O Scheduling is sometimes called 'disk scheduling'. (From Wikipedia)
To put it simple, Schedulers are the way reading and writing to the SD card is managed.
The same things that is said in the Governors part is applied here, too.
•Note: See Shan89’s Great Guide about Schedulers here.
ReadAhead buffer size:
In terms of reading data from SD card, there is a cache which is used as a buffer. The size of that cache is readAhead buffer size. The size has a direct impact on your reading speed of your SD. So giving it a right amount is crucial.
•Note: Kernel guys believe that 128 is the right amount for that and it is the default in most of the kernels.
File System “X” R/W (As for Read/Write):
Android by default doesn’t support all the File Systems (What are file systems?! See here). So some kernels may add certain file system R/W. The most popular unsupported file system is NTFS.
B.2 Features of Custom Kernels (AKA Goodies!!!):
S2W (Sweep2Wake):
With S2W enabled you can wake/lock your device by sweeping your finger from left to right (or right to left) on the hardware keys of your device (Pretty Cool, hah?).
Reason: Some people just don’t like the hardware power button! Or after some time it will become less responsive. And some will use S2W because it is cool!!!???
•Note1: S2W doesn’t affect battery life that much. It almost does not use even a little bit. But be aware this stands corrected as long as you don’t touch your device. Touching the device would cause in waking the device from deep sleep.
DT2W (Double Tap 2 Wake):
It is something like S2W to wake the device. Double tap on the screen to wake the device.
•Note: The note for S2W applies here, too.
BLN (BackLight button Notification):
With BLN enabled your hardware buttons will blink when you have notifications. It is an/a alternative/support for led notification.
FastCharge:
This feature makes it possible for the phone to ask for more current from USB host. So your device would be charged faster connecting to a USB host (Or USB Battery) Be aware that enabling FastCharge would block the USB access to your Phone Storage.
UMS (USB Mass Storage):
After ICS, google only allows MTP connection to the PC. Back at ICS there was a UMS which make available your Phone Storage as a Mass Storage device in PC. The Mass Storage advantage is that you can manipulate data on it but it cannot be done using MTP. UMS feature returns that feature to your device. A system interface is also needed which is available in ViperX ROM or Lyapota’s mod.
•Note: MTP vs UMS (From here):
MTP:
1. Can copy files over (like APKs) and then access on them on the device without mounting/unmounting.
2. File transfer is available immediately when plugged in without having to mount.
Mass storage:
1. Better security since you have to get past the lock screen to mount.
2. Is actually a real drive in Windows, so you can do all operations normally.
MHL (Mobile HighDefenition Link):
It provides the feature for the miniUSB to HDMI cables to work. To output the device screen using HDMI.
SmartDimmer:
SmartDimmer can intelligently vary the backlight brightness of your device screen to help maximize battery life.
•Note: Haven’t really tried this. You may try it yourself and see how it is.
MultiCore PowerSaving:
This feature try to group up tasks in the least cores possible. To put it simple, it will focus in using least cores for your tasks to be done. This means less cores are active and so more battery life. Also this will decrease performance.
•Note: To enable use TricksterMod app. 0 for disable and 2 for the most aggressive.
Core Control/Max Active CPU Cores:
As the name suggests, this feature allows the user to set the maximum active cores of the CPU. In other words, you can completely shut down some cores. The default value is 4 as we have 4 max active cores. you can reduce this to 3, 2 or 1. But 1 is not really recommended.
Note: Core Control is the feature of ViperX ROM.
B.3 Other Features:
Pocket Protection - NEW:
Using features like S2W and/or D2TW when the phone is in your pocket (with no specific cover) occasionally causes the screen to turn on. (as a result of being close to your skin and almost touching it). This feature is there to prevent such wake ups. It uses proximity sensor to determine if the phone is in a closed position to something. If that is true, the screen won't turn on. :victory:
Swap:
Swap is a space which provides help to RAM in situation of low memory. When you are low in RAM some data will be stored in Swap space (Mostly cache). Swap is a space on Internal (and/or External Memory) so swap is not fast in comparison to RAM, but it helps multitasking, because you could cache more app data to your memory. So the results are less Force closes because of low RAM and faster switching between apps.
Swap is not really used by default, or it is used with very low space. You can boost your Swap, and also know more about this. there's a very nice MOD called Turbo Boost which allows you to add more Swap using your unused space. See this.
zRAM:
In zRAM unnecessary storage resources are compressed and then moved to a reserved area in the fixed RAM (zRAM). So in other words, zRAM is a kind of swap in memory (see swap above). As the data is compressed not much memory needs to be preserved as zRAM. However, the CPU has to work more because compressed data has to be unpacked again when it is needed). The advantage clearly lies in the speed. Since the swap partition in RAM is much faster than this is a swap partition on a hard drive.
In itself a great thing. But Android does not have a swap partition, and therefore brings Android ZRAM under no performance gain as would be the case with a normal PC. (From here with some editing.)
Click to expand...
Click to collapse
What we need to know essentially lies here:
zRAM off = Low use data will be stored the way they are in the memory. This will cause no extra load on CPU, yet need more RAM.
zRAM on = Low use data will be stored compressed in the memory. This will cause extra load in CPU as to store or restore data, yet preserve more Free RAM.
The main use of zRAM is when you are using a heavy ROM that eats up all your RAM. This will allow multitasking to be more functional. On light ROMs, or for those who don't multitask much, this is not necessary.
Init.d Support:
There are some scripts that run every time your device boot up which are located in /etc/init.d Those are called init.d scripts. One of the most popular init.d scirpts that is available for Note 10.1 is this.
DriveDroid Support:
Gives the phone the ability to use DriveDroid.
DriveDroid allows you to boot your PC from ISO/IMG files stored on your phone. This is ideal for trying Linux distributions or always having a rescue-system on the go... without the need to burn different CDs or USB pendrives.
Click to expand...
Click to collapse
Take a look here for more information.
TCP Congestion Control:
The choices in this section, address how the operating system kernel manages flows of information in and out of the kernel, which is at some level the "switchboard operator" of your handset. More info here.
Better to leave this options as is. Cubic as the default of your kernel.
Dynamic FSync:
fsync is a system call in Unix/Linux. "man fsync" says:
fsync() transfers ("flushes") all modified in-core data of (i.e., modified buffer cache pages for) the file referred to by the file descriptor fd to the disk device (or other permanent storage device) so that all changed information can be retrieved even after the system crashed or was rebooted. This includes writing through or flushing a disk cache if present. The call blocks until the device reports that the transfer has completed. It also flushes metadata information associated with the file (see stat(2)).
Click to expand...
Click to collapse
So it's something embedded in programs after a related set of write operations to ensure that all data has been written to the storage device. The bolded part is what makes it interesting for some to disable it - "The call blocks" means the calling program waits until it's finished, and this may create lag. The downside is that if the system crashes, the data on the storage devices may be inconsistent, and you may lose data. (From here).
Dynamic FSync, makes it possible for fsync operation to be asynchronous when the screen is on, and synchronous when the screen is off. And what does asynchronous mean? Means OS issues fsync call, but not necessarily immediately at commit time for each transaction. It delays the FSync call for a certain amount of time. In case of a crash, the transactions not yet sync'ed in the last delay time before the crash may be rolled back, but the state of the data is always consistent. (From here).
Work in progress, will add more info soon.
C. Some built in features with no user control:
Tegra 4 Drivers - NEW:
First you may want to know what a driver is:
A driver is a small piece of software that tells the operating system and other software how to communicate with a piece of hardware.
For example, all printers come accompanied with drivers to install that tell the operating system exactly how to print information on the page. (From here).
Click to expand...
Click to collapse
So kernel guys (Trip to be exact) made it possibe to use some Tegra 4 drivers on Tegra 3 Chip of HOX so that we can enjoy the advantages of new drivers.
MPDecision:
Mpdecision decides when the second core shall be active and sets the idle and screen off freq while the governor decides when the freq should be increased / lowered.
More info at this thread.
CPU Quiet:
It's a dynamic CPU core management. More info here.
D. FAQs (Frequently Asked Questions)
MUST KNOW FACTS:
The modifications and changing values of kernel parameters will stick until the next reboot. They will be set to default when you reboot your device. So if you want them to stick, you have to do one of the following:
1. Init.d Scripts: Here is a complete guide, how to make one. Also you can use 'CS' app. Which is explained in Useful tools part of this guide (Post 3).
2. Set on Boot: The programs like Trickster Mod, have an option named 'Set on Boot'. If you want the settings you have in Trickster to stick, you have to check that option.
---------------
And a quote from the elite developer that everyone know:
However, if you put any trust in Quadrant scores you could use them to prove that dancing naked for 5 minutes in your garden affects device performance. - Chainfire
Click to expand...
Click to collapse
Q. I'm on Stock. How can I flash a custom kernel?
A. See this complete Tutorial, here.
Q. Is it dangerous to flash a custom kernel?
A. As long as you follow the instructions step by step there shouldn't be any problems. However flashing is always at your own risk.
Q. Why would I need to flash a custom kernel?
A. Because of the goodies I described in post 1.
Q. Which Kernel is more suited for me?
A. That really depends on you. You have to try the kernels and see which one is more suited for you. In Post 3 A little description about the kernels will be provided.
Q. AOSP or Sense???!!!
A. Sense Roms can be identified by their description. Just visit the page of your desired ROM and see what is its base. If it has 'stock' as the base it's sense ROM. If it has AOSP, AOKP, CM or other things then it is an AOSP rom. So identify your base before flashing kernel.
Q. I don't like this fastboot stuff. Why HOX can't flash boot via recovery?
A. That is because something called S-ON (Security-On) by HTC which prevent flashing boot.img via recovery.
Q. Repack?! What on earth is that?
A. Repack will be elaborated in detail in Post 3.
Q. Is repack needed for Kernel X and ROM Y?
A. See Repacking in post 3.
Q. Is there a kernel with OC interface up to 1.6 or 1.7?
A. Yes. Search!
Q. I just want S2W or UMS with Stock kernel, nothing more. Is there a kernel to provide that?
A. Yes, Alex-V Kernel v.0.3 is there for you. See Post 3 when it's ready for more info.
Q. After installing custom kernel I am experiencing battery drain issues. Why is that?
A. The current custom kernels do not have drain issues. Install Better Battery Stats and/or GSam Battery Monitor to figure out what is causing the battery drains.
More Info will be added soon.
E. Repacking:
All Android roms require a boot image to work (normally named boot.img). These files contain the ramdisk necessary to run the rom, as well as the kernel. Occasionally you may want to replace the kernel to add new features or fix bugs, but you must tweak the image to be compatible with your rom (And also as the ramdisk may contain some tweaks, to preserve those tweaks and add them to the kernel of your choice). (From Here).
Click to expand...
Click to collapse
The very main question "Is it really needed?"
Well, you don't really need to repack kernels for Sense/AOSP Roms anymore (Those days are gone!) as they already contain the tweaks and ramdisk to get almost all the ROMs up and running. But sometimes you may encounter some problems like Weak signal/Wifi or such issues. In that case, it is advised to repack your kernel.
How to Repack?
Before you start repacking you need these 2:
1. Ramdisk (boot.img) of the ROM you are using (Or you wish to use). It is usually in the zip file of The ROM which you flashed (or going to flash) via recovery. Just open the zip file and extract boot.img. Some ROMs put the boot.img in their OP (First posts of the respective thread). So if the ramdisk wasn't in the zip file of the ROM, take look at the thread of the ROM.
For preventing the confusion rename the boot.img to the ROM name + ROM version for example Renovate_F4.img
2. Kernel image (boot.img) of the Kernel you wish to use. Some kernels put it for download in their thread. Sometimes modules and image is both in one archive. In that case open the zip file if the kernel and extract boot.img. Make sure you don't replace the other boot.img from step 1. For preventing the confusion rename the boot.img to the kernel name + kernel version + the kernel base(Sense/AOSP) for example XM_305_Sense.img
Click to expand...
Click to collapse
a. Using online repacker:
1. Visit this site: http://nibble.cc/repack/index.php
2. In source kernel image, choose the ramdisk of the ROM. (ex. Renovate_F4.img)
3. In New kernel image, choose the kernel image. (ex. XM_305_Sense.img)
4. Hit 'upload and repack'.
5. Download the repacked kernel.
b. Using One Click Tool:
1. Copy the ramdisk and the kernel image to "kernels" folder which is in the folder of the tool.
2. Connect your device and run the tool.
3. Select "Kernel repack".
4. Select the kernel image in "kernel" section.
5. Select the ramdisk in the "ramdisk" section.
6. Hit "perform action".
7. The repacked kernel is in the "repacked" folder which is the folder of the tool. It's name is a combination of The kernel name and the ramdisk name so that it can be identified easily.
Note: You can also choose to flash the kernel. Just check "Flash repacked kernel". The tool automatically reboots into fastboot and flashes the kernel.
Note: You can choose to repack via PC in the tool. It is much more faster. And also you can repack without connecting your phone if you choose repack via PC (This feature works from version 2.1 or 2.0 I think. Check the thread for more info).
F. Useful Tools and Guides out there:
F.1. Tools:
Trickster Mod:
A little yet powerful program. It is almost the best tool that you can have on your HOX to change certain kernel parameters like UC/OC/Voltage Control of both CPU and GPU. Schedulers, ReadAhead BufferSize, Advanced Governor control. You can change features like S2W and SmartDimmer, too. Also you can set this changes to take effect on boot. Which automatically sets the parameters on device startup (preventing the defaults values to be set, again).
Trickster Mod - Google Play
CS - Custom Settings:
This app is exclusively made for HOX, so it supports most of the features of custom kernels. This app manages to set the values you desire by generating init.d scripts. So there is no set on boot operation by the app but by the scripts.
Custom Settings - XDA
One Click Tool:
This tool is created for One X, and you use it to repack and flash kernels. And by flashing I mean no CMD and other scripting stuff. This tool automates flashing (Though the flashing process via fastboot is not that much of a hard work!).
One Click Tool - XDA
F.2. Guides:
- Battery Life and Gaming Guide + UV/UC and everything explained! by Shan89
- Boosting gaming experience and maximizing performance for gaming by hamdir
More info will be added soon.
Reserved for later reading
Sent from my HTC One X using XDA Premium App
Desaf said:
Reserved for later reading
Sent from my HTC One X using XDA Premium App
Click to expand...
Click to collapse
Yeah, sure!
Sent from my HTC One X using Tapatalk 2
Added recently to the guide:
Post 1:
- ReadAhead buffer size
- Init.d
- TCP CC
Post 2:
- FAQs.
realy helpful
thanks mate for the information.
mandrive said:
thanks mate for the information.
Click to expand...
Click to collapse
Glad to be of help!
Sent from my HTC One X using Tapatalk 2
Recent added to the OP:
- Swap (In appearance of the nice Mod TurboBoost)
- Dynamic FSync (Tricky feature)
Will be added soon:
- Repacking
Nice tut
Sent from my HTC One X using xda app-developers app
Alex-V said:
Nice tut
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks, man.
Sent from my GT-N8000 using Tapatalk HD
csec said:
Thanks, man.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
Added with credits to my kernel thread..thx again
Sent from my HTC One X using xda app-developers app
Recently added:
Post 2:
- TEGRA 4
Post 3:
- Repacking
Will be added soon:
- Kernels reviews
Huuuuge guide
matt95 said:
Huuuuge guide
Click to expand...
Click to collapse
Just wanted to be a complete guide. Explaining everything.
Sent from my GT-N8000 using Tapatalk HD
csec said:
Just wanted to be a complete guide. Explaining everything.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
You succeeded in it
matt95 said:
You succeeded in it
Click to expand...
Click to collapse
Thanks. Glad I could contribute to the community. :good:
Sent from my GT-N8000 using Tapatalk HD
csec said:
Audio Min. Freq.:
This specify the minimum frequency of the CPU when Audio is being processed. Default min in custom kernels is normally 51MHz. But Audio needs some more processing power. Anyhow, with this you can change that value.
Click to expand...
Click to collapse
Thanks for the guide.
I'm using CyanogenMod right now and I'm having problems with Audio over Bluetooth with the low power core of my endeavoru. I think increasing this frequency might help.
How is this called in kernel-land a.k.a. how do I find instructions regarding this? Asking Master Google was of no help, as I only found custom variants of the CyanogenMod kernel.
lordtillt said:
Thanks for the guide.
I'm using CyanogenMod right now and I'm having problems with Audio over Bluetooth with the low power core of my endeavoru. I think increasing this frequency might help.
How is this called in kernel-land a.k.a. how do I find instructions regarding this? Asking Master Google was of no help, as I only found custom variants of the CyanogenMod kernel.
Click to expand...
Click to collapse
What is your kernel and version?
What governor, what frequency?
What kind of problem are you having with your audio?
csec said:
What is your kernel and version?
What governor, what frequency?
What kind of problem are you having with your audio?
Click to expand...
Click to collapse
I'm running CyanogenMod 10.1 RC2 with the default kernel, which is the 3.1.10-cyanogenmod+inky-ghost kernel, according to About Phone.
Governor is ondemand, and the frequency is untouched - meaning, CyanogenMods defaults (51<f<1500).
The audio sometimes stutters, when I'm using my bluetooth headphones and the screen is locked - I assume, that's due to the low power kernel of the tegra chipset.
Can you help finding that setting, or recommend a good replacement kernel?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*** NOTE THAT 3.16 NA OR 4.13 Red Magic 5G SPECIFIC ROMS SHOULD BE USED WITH THIS KERNEL! THE COMBINED ROM (WITH RM5S) HAS UPDATED KERNEL CODE THAT IS NOT FULLY COMPATIBLE AND NUBIA HAS NOT UPDATED THEIR SOURCE CODE ***
*** Please click Thanks (Thumbs up icon) on my post here if you like my kernel and rate the thread 5 stars, then just use it and enjoy - if you want to send me a beer or two feel free - you don't have to use PayPal - Revolut and Amazon.com (USA) gift cards avoid fees. I like to hear from happy users I hope you are glad that you have the fastest phone in the world currently. The active cooling in this device is utilized to the extreme with MOD kernel, meanwhile your battery usage will be much improved at the same time. How? Well, that's all in the source code, free for all to fork it on GitHub and modify to your liking. Just don't forget to credit me and the many great devs that made the improvements possible... without them, there would be no MOD kernel. This is just a hobby of mine and I like to produce a nice product that all can enjoy. I'm also quite friendly and although I may tell you no I won't add that feature (such as network hacking tools), I won't hold anything against you for asking. I have not been compensated other than by some generous folks on my Telegram channel, so this whole project is basically self funded. Red Magic will not support it, unfortunately, but you can if you feel the improvements are worth it. I believe they are, but I come from a biased point of view as the sole developer for RM5G ***
********************************************************************************************************************************************************************************************************************************
NOTICE: YOU ASSUME FULL LIABILITY FOR ANYTHING THAT MAY HAPPEN TO YOUR PHONE USING THIS KERNEL. ALTHOUGH IT WORKS 100% ON MY PHONE, IT MAY NOT WORK THE SAME ON YOURS. THE PROCESS OF ROOTING A PHONE AND INSTALLING A CUSTOM KERNEL ALWAYS HAS RISKS, SO IF YOU ARE NOT COMFORTABLE ASSUMING THOSE RISKS, DON'T INSTALL THE KERNEL! THIS IS A TYPICAL DISCLAIMER FOR CUSTOM KERNELS I HAVE FOUND NO BUGS WITH IT AT ALL. USERS ON CN, GLOBAL, AND NA ALSO HAVE NOT FOUND ANY PERFORMANCE ISSUES OR BUGS (DO NOT USE V7.14 or V8.11) IF YOU DON'T KNOW WHAT YOU ARE DOING, IT'S BEST TO REMAIN STOCK. OR JOIN THE TELEGRAM GROUP, AND GET SOME REAL HELP.
********************************************************************************************************************************************************************************************************************************
Easy root method: https://forum.xda-developers.com/nu...nner-tutorial-unlock-bootloader-t4131585/amp/ although I suggest still using Magisk 20.4 for root.
Note: if you've already rooted and want to upgrade, people have had success saving the kernel as boot.img and TWRP as recovery.img in SmartPack, vbmeta skip as vbmeta.img and placing into the ROM update.zip using MT Manager (a root browser) and saving the updated file. Then do a Settings / System Update / click the 3 dots / local update and select your modified file. In fact I upgraded from 3.13 to 3.16 NA ROM without losing anything this way. Now for normal installation:
Custom kernels require root and Magisk to be installed. This is due to the signature not being signed by Red Magic (the company) itself. Following the above method you will still pass SafetyNet and most apps will work without trouble. If you have a specific app that detects root, well, Magisk Hide the app from Magisk Manager and see if that fixes it. You should also Hide Magisk Manager from various forms of detection (under Settings). Last case is to move the installation of Magisk under a random directory (which I have not had to do and all my banking apps still work), only if the root detection methods used by your app providers are more picky.
MOD KERNEL 1.4 STABLE:
RELEASE NOTES:
Block mode I/O has been changed to Multi-Queue from Single-Queue so your default scheduler is now MQ-deadline (credits to PappaSmurf, excellent kernel dev). You can choose between mq-deadline, kyber, and none in a kernel manager under I/O scheduler. From my benching with Androbench, it doesn't make much difference which one you use. Some have parameters you can tweak. None literally means no scheduler which is fine on an SSD, and has no overhead if you want to select it in a kernel manager. I always recommend SmartPack. To get settings to stick you Toggle "Apply on Boot" and it will go to what you've selected after 5-10 seconds on the next boot.
All debugging has been turned off completely on BBRv2 - thanks to PappaSmurf (I missed a few spots), and debug can't be turned back on from the userspace now. BBRv2 is selected as the default TCP algorithm which users have explained as a "no-lag" algorithm while gaming. It's just generally a fast algorithm all around. For me it works great, but you can still choose from many different algorithms in a kernel manager if you want to.
In SmartPack / Misc / TCP Congestion Algorithm, you have many choices: reno / bbr / bbr2 / bic / cdg / cubic / dctcp / westwood / highspeed / hybla / htcp / vegas / veno / scalable / lp / yeah / illinois. A SmartPack script is included below you can add in SmartPack to show the true TCP algorithm as it will always show Reno (a bug also shared by FK kernel manager). Below it's called Check_TCP.sh just go to SmartPack / Script Manager / Import / Check_TCP.sh. Afterwards, click Execute to see the active algorithm. If you set it on boot, this is the algorithm that will run, despite what the field says in Misc.
Battery is running very well on normal usage I'm getting around 7.5% active screen on drain over 7 hours and <0.7% screen off drain over 13 hours at 90hz screen setting. This is with actively using the phone for multiple "normal" purposes, reading emails, browsing websites with Chrome, reading news, streaming videos, etc. various shopping (Amazon/eBay) and tracking, Reddit feeds and live video, and other random "daily" tasks, up to 10 apps open at a time. Gaming of course will drain more, as will 144hz. I also have dark mode enabled in Settings. To get idle drain down I disabled 3 additional wakelocks that were causing high screen off drain, and so far I haven't seen an issue with blocking them. I also removed wakelocks that no longer exist since the Boeffla WL Blocker default list was created (it was quite old) so it now should be relevant for this device, with no interaction on the users part to disable anything via a kernel manager. Still, in SmartPack you will see a Wakelocks menu in case you install an app that causes idle drain to rise, this can be used to find and block wakelocks causing the problems. It can sort by wakeups and also by time. As it states though, you should be very careful what you disable. There can be unintended consequences and most wakelocks are not well documented as to what they actually control.
Dynamic Stune Boost is entirely removed from the kernel code now, as I didn't see any benefit from using it with this kernel.
Don't forget Dynamic Fsync is hidden under Misc in SmartPack which if you turn on will speed up your SQLite speeds. AnTuTu will penalize you for this, ignore it, your phone will be faster - but I leave it off by default. Androbench will show the true memory benefit. It is significant if an app does a lot of operations on databases. Journaling for the database is held in memory until the screen is off, then it is written. Although there is a chance of a data loss or corruption with this on if the device were to crash, it is safer than just turning off fsync. If you have any unstable apps, just leave it off - better to be safe. On a solid system though, you may notice better performance.
Also remember under SmartPack / GPU there is AdrenoBoost - it is set to low. You can alter to medium or high to get faster transfer between GPU frequencies, although it has worked great for me the way I use the phone. For you another setting may suit you better. Recall RedMagic OS only allows several frequencies which I spaced out as well as possible at 305mhz, 400mhz, 525mhz, 670mhz, 800mhz, and either 900 or 940mhz depending on the version you installed.
Overall I'm very satisfied with this kernel build and don't plan on adding or subtracting anything from it for the time being. It does what it should do, gives solid performance, and good battery life. My last score on AnTuTu setup with defaults 12GB/256GB was 682K which currently is still the top performing phone out there - running at 940mhz GPU. Not all phones can handle 940mhz so use 900mhz if yours cannot. If there are enough requests for an intermediate build (say 925mhz) I can add one later off the same code base. Also note in releases there are "gaming" builds that don't keep track of CPU times at each frequency, which was a request by users to remove any potential lag while gaming. I run the non gaming version, useful if you want to tweak battery usage, but nonetheless, both versions are there for you to use.
I'm on Telegram t.me/NubiaRedMagic5G_Mods as long as I have the phone. Which will be quite a while if Red Magic / Nubia decides to fix N41 5G in the USA.
Also note that all the features of this kernel (besides ones specifically added by me) are the creation of other developers whose contributions are all notated in the kernel source code. Some of the developers that have contributions here or helped me in some fashion: Resurrect88, DD3Boh, PappaSmurf, kdrag0n, Ayrton990, Flar2, Lord Boeffla, plus many more across the globe. Without them, I wouldn't be making any kernels! And I'm sure there are many other devs I've forgotten to mention, I thank all you guys for your help and support.
MOD 1.4 Download Link:
https://github.com/mrslezak/NX659J_Q_kernel/releases/tag/1.4
PRIOR RELEASES BELOW:
8th Release:
MOD KERNEL 1.35-BBRv2 STABLE:
RELEASE NOTES:
This is an intermediate release - I realized that the prior release was draining far more battery than it should, and I found the source was debug related code in BBRv2 from Google. So this is the updated kernel that gives you battery life like before this TCP algorithm was added.
CONFIG_CPU_FREQ_TIMES=y has also been added so you can see in a kernel manager how much time is spent in each mhz block for each set of processors. This can be useful if you set in a kernel manager (like SmartPack) a minimum CPU mhz to see how much time is actually spent at each level.
The code base also has Dynamic Stune Boost, but I haven't had time to optimize it for the device, so it's just on default settings. So there are 2 versions of this 1.35-bbr2 release. At some point it will be enabled as part of a regular release (some 17 commits squashed together into 1, Stune Assist was causing issues so I turned it off). The main idea of that set of code additions is to run the device at lower frequencies, saving battery, while still achieving the same performance level to the user of the phone. If you want to try different options for it in SmartPack or FK Kernel Manager you can.
Downloads:
https://github.com/mrslezak/NX659J_Q_kernel/releases/tag/1.35-bbr2
7th Release:
MOD KERNEL 1.3-BBRv2 STABLE:
RELEASE NOTES:
Added the 31+ commits for BBRv2 from Google. Squashed the commits down to 6 by author from Google (for easy code maintenance). It's said to be the best TCP (internet congestion) algorithm so this sets it by default. You can still select from the others added in 1.3, as mentioned only EX Kernel manager properly shows them. But SmartPack if you choose the one you want under Misc, then click Apply on Boot, it actually will load the TCP algo you selected. It's just a visual defect. I also made a script for SmartPack uploaded to show you the TCP algo that's selected in my repo you can install so you can verify for yourself. Give it 10 seconds (default on boot setting) before you check.
Downloads:
https://github.com/mrslezak/NX659J_Q_kernel/releases/tag/1.3-bbr2
6th Release:
MOD KERNEL 1.3 STABLE
RELEASE NOTES:
All this release adds is TCP congestion algorithms. The only kernel manager which correctly shows the algo set correctly is EX Kernel Manager. Using SmartPack or FK Kernel Manager will tell you that you're always on Reno, when in fact, you aren't. I'm not quite sure if this is bug related to 865 kernels as a fellow dev had the same experience (on an Op8 Pro). Now the default is set to BBR. Why? No reason specifically, although it is one of the better algorithms for internet usage. You can easily change in any kernel manager and set on boot which one you'd like to use (see above RELEASE NOTES if using SmartPack). But this gives you plenty of options:
BBR, BIC, CDG, CUBIC, DCTCP, WESTWOOD, HSTCP, HYBLA, HTCP, VEGAS, RENO, VENO, SCALABLE, LP, YEAH, ILLINOIS
You can Google the benefits of each and pick what you like. Or just leave it alone. The prime idea of MOD kernel is that you don't need to adjust anything it just works optimally without any intervention. Read the release notes for prior features that have been added. There are many just not summarized in a single place at the moment. All the optimization has been done for Red Magic OS.
Downloads:
https://github.com/mrslezak/NX659J_Q_kernel/releases/tag/1.3
5th Release:
MOD KERNEL 1.25BETA
RELEASE NOTES:
This release is mostly about battery savings. I'm averaging around 6.5% active drain on normal tasks with this version (90hz setting), and around 0.5% screen off drain. A big improvement over the stock kernel. So I ended up with about 13 hours SOT + 24 hours screen off on 1 charge! See the picture, I stopped at 11% left. Now I didn't say anything about gaming. If you want to game and have power saving benefits, don't enable any of the built in boosting modes in the game launcher - the Red Magic OS will override everything. Let the kernel do the work for you. And if you're seeing any graphics lag, go into SmartPack kernel manager (free) and go under GPU, Adreno Boost is enabled on low, you can set it to medium or high. That will increase the speed at which the GPU throttles up and down.
1) Switch to the Energy Model for CPUs: Several subsystems (thermal and/or the task scheduler for example) can leverage information about the energy consumed by CPUs to make smarter decisions. This config option enables the framework from which subsystems can access the energy models.
2) Added CPUMASKS for the Little, Big, and Prime cores from Sultan Alsawaf Sultan: SultanXDA, prime added by Danny Lin: kdrag0n.
3) Added kernel control of the minimum frequencies for the little and big clusters by Danny Lin kdrag0n. They are set to run at their minimum running frequencies when idle 691mhz (little) and 710mhz (big) which results in nice power savings when web browsing or just under low load in general. Prime cluster min is not set as it makes the CPU scheduler function poorly.
4) Added AdrenoBoost by Aaron Segaert: Flar2, with all its changes squashed into 1 commit. Defaults to low setting. As mentioned before, you can change in SmartPack, and set on boot if you need a higher value than low: https://github.com/SmartPack/SmartPack-Kernel-Manager/releases
5) Uploaded the various GPU OC files to the repo, It still will just build off the default one, but they are here to be complete. 940mhz version again is posted, Building direct from the repo will give you 900mhz max GPU.
Downloads:
https://github.com/mrslezak/NX659J_Q_kernel/releases/tag/1.25BETA
4th Release:
MOD KERNEL 1.2 BETA
RELEASE NOTES: (Note a 940mhz GPU clock edition is available, if you want to try it, a few of us have had good results on it. Likely the max an 865 GPU can run. You'll sacrifice the power savings, however):
1) Enable Power-efficient workqueues by default, add a toggle that can turn this off via a kernel manager (under CPU in SmartPack). Enabling this makes the per-cpu workqueues which were observed to contribute significantly to power consumption unbound, leading to measurably lower power usage at the cost of small performance overhead. Have also added many other power saving features to the defconfig. The phone is a beast, power savings is a good thing to implement.
2) Update the LZ4 decompressor algorithm with a much faster variant for the ZRAM swap, now version 1.8.3-9 credits Gao Xiang [email protected] and many others (check commits). Speed improvement below (should help on 8GB devices):
Compressor name Compress. Decompress. Compr. size Ratio Filename
lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8
lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8
3) Default scheduler is set to SQ deadline. Should see minimal improvements in speed until I get a MQ variant working. On the task list ahead.
Download Link:
1.2BETA: https://github.com/mrslezak/NX659J_Q_kernel/releases/download/1.2BETA/MOD-RM5G-GPUOC-Beta1.2.zip
940mhz GPU release here, it's still 1.2BETA, just with the max clock a few of us have been able to use. That doesn't mean your device can for sure handle it, but give it a try if you'd like! Note the power savings will likely not be there vs the other release at 900mhz:
https://github.com/mrslezak/NX659J_...oad/1.2BETA/MOD-RM5G-GPUOC-940mhz-Beta1.2.zip
3rd Release:
1.15BETA: https://github.com/mrslezak/NX659J_Q_kernel/releases/tag/1.15BETA
This is a HEAVILY updated release of the MOD kernel 1.10BETA - I realized the phone's software will allow 6 frequency clocks, although 1 did not have a regulator defined (now patched). NOW I VERY HIGHLY suggest installing SmartPack Kernel manager. It will give you insights into the kernel and how it's performing and it's free. It also will let you adjust added options now in the kernel. Just root your phone and flash from TWRP. If you haven't already installed Magisk, then install that too. There's a guide I posted on XDA about that. Use the experimental method there is no reason to unlock your bootloader. https://forum.xda-developers.com/nu...how-to-unlock-bootloader-redmagic-5g-t4081743
RELEASE NOTES:
1) Bugfix: there was 1 missing 800mhz GPU frequency regulator clock on the prior version. This has been set to TURBO, 1 level under the 900mhz regulator of TURBO_L1.
2) Boeffla WakeLock blocker (v1.10 + tweaks) has been added to reduce battery drain when the phone is not being used, using the latest version and all patches. A default block list is included. You can access in SmartPack Kernel Manager under the new menu that will appear "Wakelocks" - especially investigate if your phone has high idle drain, you can experiment with blocking other wakelocks (which don't allow your phone to sleep). Or you can leave as is. I get just under 1% drain (screen off) and the phone sleeps quite often with this version. Take a look at the screen shot! That's just normal phone usage, not gaming.
3) All debug entries (except those required) have been stripped completely out of the kernel. This results in less wasteful debug information being generated.
4) The default algorithm for ZRAM has been changed from LZO (high compression, but slow) to LZ4 (slightly less compression, but fast). LZ4 algo was added. It still defaults to 4GB.
5) Dynamic Fsync has been added to the kernel as well. This patch allows journal entries to be written only when the screen is off. I.e. they are cached and written afterwards. This increases database performance. It is disabled by default so in SmartPack Kernel manager, if you'd like to turn it on, go under Misc, select Dynamic Fysnc, and select apply on boot. There is always a risk of data loss when delaying writes, although I've personally never have had issues - it only happens if the phone crashes, and mine has never crashed on this kernel. This won't normally increase your benchmark scores (except AndroBench), it increases SQLite database access speed. Up to you to use or not, works fine on my device.
6) Here are the updated frequencies (note there is 1 more). Will have to wait for AOSP before I can add back more. Note the 670MHz is likely the 865+ max frequency per the release notes today on the device (which I assumed by the source code anyhow pre-announcement): 900MHz / 800MHz / 670MHz / 525MHz / 400MHz / 305MHz
AS ALWAYS, USE AT YOUR OWN RISK!!!
Github Source:
https://github.com/mrslezak/NX659J_Q_kernel
Initial Release:
https://github.com/mrslezak/NX659J_Q_kernel/releases/tag/1.0.BETA
Second release - gets over the "reset to 490mhz" bug caused by the system software, at the expense of reducing frequencies to 6 total:
https://github.com/mrslezak/NX659J_Q_kernel/releases/tag/1.10BETA
Newest release -> will be posted on the top from now on.
Telegram:
https://t.me/NubiaRedMagic5G_Mods
And note the AnTuTu benchmark is just a first run after installing. 670K is likely a record on any 865 phone. The last bench turning off 4GB ZRAM (12gb/256gb device) I got 673K. AnTuTu doesn't equal performance, but if you've benched you'll see this is an insane improvement over the stock kernel. Only when the demand is there will it scale up to 900mhz. I've been using for a while now and notice no difference in battery life. The Adreno driver is very good at handling extra clock frequencies efficiently without modification (despite an "Adreno Boost" that is often added to kernels). The gamers using the kernel are making statements that they couldn't imagine the game play any better than it already was, but now it's even smoother.
Unfortunately the way the Nubia software behaves, it auto-resets to power level 5 (which was 490mhz) on the 1.0BETA on boot and also after boosting the frequencies up. I tried every possible way to bypass this but eventually just gave in and removed frequencies. So the BETA1.10 and above have less frequencies but will always revert to 305mhz, the base minimum frequency of the device. Hopefully once we have AOSP ready I can add more.
MattoftheDead
I.e. M.O.D. Kernel Developer
The first Red Magic 5G OC kernel.
Xiaomi Mi9 / Mi9T Pro Pie V2 and Q V1.5 Kernel Dev
Nice work. Do you notice any benefits to OCing the GPU like that? I don't think there are many games that would benefit atm.
This is amazing !!! :laugh:
Is this going to work on all roms like CN, NA or EU Roms? Im currently running NA 3.11 flash from CN rom with root and twrp
We have people using it on CN Global and NA versions no problem at all. Works fine on every model.
Kernel is fully functional no issues at all.
CN Rom to NA Rom v3.11
305mhz min to 900mhz max confirmed and using smart pack to control the frequency
Thank you for this hopefully there is more development i really appreciate ur effort
Kernel building is just a hobby of mine, I was posting a minimal kernel to get some more kernel developers on board to hopefully add more features. I usually add Boeffla Wakelock Blocker and Dynamic Fsync and call it a basic kernel. The last super kernel I made took way too long, and I don't have that kind of time anymore - boost functions and underclocking to balance out the battery life and such. Development work doesn't pay anything, I didn't get the phone free, all my donations go to other developers. And I have a full time job and family. But if anyone wants to port over my MOD Kernel Q 1.5 Mi9 features, well that would be a super kernel. It's just really, really time consuming, time I don't have at the moment. And the merging of source has to be EXACT or you end up with a really slow phone rather one that balances underclocking, boost, and overclocking.
MishaalRahman said:
Nice work. Do you notice any benefits to OCing the GPU like that? I don't think there are many games that would benefit atm.
Click to expand...
Click to collapse
All the gamers using the kernel are reporting that the games run smoother than before, which no one thought was possible. It is already a flagship device. But the GPU OC with the Adreno driver scales when needed up to the frequencies that it has in the table and has no issue on 670, 800, and 900mhz reported so far. There are gamers on NA, Global, and CN ROMs, with no bugs reported. No issues and everything works properly. I have tested myself and although I'm not a gamer, all the functions work as they should. It still connects via Bluetooth, it still takes photos and videos, etc. There is no lag whatsoever. Overall I think the frequencies are ideal for this device with it's advanced active cooling system. Other devices however, with passive cooling, are unlikely to handle the increased GPU clocks.
I found an unusual bug where the GPU Minimum Frequency will reset on its own to 490mhz even if i set the minimum frequency to 305mhz im using smart pack kernel manager that you provided and cool tool btw to monitor the gpu frequency.
I also set the battery optimization to off on smart pack so it wont turn off itself.
This also happens when i played games that actually boost to 800 to 900mhz then after i close the game it sets back the minimum frequency to 490mhz so i have to set it again to 305mhz on the kernel manager to save more battery and lower the temps.
I also notice it sets back to 490mhz minimum frequency by just watching youtube videos so i have to set it back to 305mhz again. I tried different kernel manager too like Franco Kernel Manager and Kernel Audiator and still doesnt fix the issue
I think this was a minor bug for sure
I never touch the GPU governor btw
Performance was super nice thou i scored 645k on antutu on my first run but for now im going back to stock and gonna wait for your next update
What to do to root the phone without breaking the fingerprint please. I read the article publish nothing understood someone can explain to me step by step. I am an amateur I never root a phone. I have cn 2.55 16gb.
I don't have the same issue - I just tried to recreate it by watching a YouTube video and I went back to SmartPack and it still shows 305MHz GPU frequency. Although I'm using the debloated / optimized ROM I created Black Magic 5G which has everything setup properly, Nubia apps frozen, everything moved to 3rd party apps. NETFLIX patched to 4K HDR10, YouTube Vanced, a ton of root utilities, AdAway ad blocker, etc. You can find it on the Telegram channel (I'm using the NA/Global version of Black Magic 5G). Then I watched Netflix, still at 305mhz. As I have no idea how you've setup your phone, I just can't recreate it.
shaifabra5 said:
I found an unusual bug where the GPU Minimum Frequency will reset on its own to 490mhz even if i set the minimum frequency to 305mhz im using smart pack kernel manager that you provided and cool tool btw to monitor the gpu frequency.
I also set the battery optimization to off on smart pack so it wont turn off itself.
This also happens when i played games that actually boost to 800 to 900mhz then after i close the game it sets back the minimum frequency to 490mhz so i have to set it again to 305mhz on the kernel manager to save more battery and lower the temps.
I also notice it sets back to 490mhz minimum frequency by just watching youtube videos so i have to set it back to 305mhz again. I tried different kernel manager too like Franco Kernel Manager and Kernel Audiator and still doesnt fix the issue
I think this was a minor bug for sure
I never touch the GPU governor btw
Performance was super nice thou i scored 645k on antutu on my first run but for now im going back to stock and gonna wait for your next update
Click to expand...
Click to collapse
Yeah maybe because you modified the rom.
Im currently running Flash Global V3.11 when i tested your kernel no modification made im just rooted with TWRP Installed and i posted this kernel on red magic 5g group on facebook and 3 of us having the same issues as well.
Im gonna try it again on V3.13
UPDATE:
still returning to 490mhz as minimum frequency after gaming and after watching one youtube clip
kinda sad hopefully you can fix this bug on the global rom that nubia provided if you have the time, great kernel for gaming because of the 900mhz boost and the phone can sustain this boost because of the active fan
Why don't I have a roughly similar score?
Is it possible to overclock the CPU as well? They officially release the specs sheet of ROG Phone 3 it has overclocked CPU (3.091ghz) and an overclocked GPU. I know this phone can keep up with those clocks because of the cooling system but the problem is the battery life. But still, its worth it.
Blink003 said:
Is it possible to overclock the CPU as well? They officially release the specs sheet of ROG Phone 3 it has overclocked CPU (3.091ghz) and an overclocked GPU. I know this phone can keep up with those clocks because of the cooling system but the problem is the battery life. But still, its worth it.
Click to expand...
Click to collapse
I believe Qualcomm blocked overclocking of CPUs quite a while ago from SD845. Only GPUs can be overclocked.
Though I don't know if devs have gotten tools to get around it.
The 490 bug looks like it's related to the gaming mode APK resetting the min frequency. I can't decompile or recompile APKs so I don't have a way to get around the system reverting to 490 without removing 3 other frequencies. It seems hard-coded in the app that it only expects to see 5 frequencies so to have all working properly, 3 need to be removed. This is in contrast to what my buddy dev on the Op8 Pro can do, but this device is designed differently in how it boots and custom apps that increase frequency clocks. If any devs are good with APKs it's a very simple function call that sets the minimum GPU frequency. The only odd thing I see is that the minimum power level stays at 8 (minimum) which corresponds to the lowest clock speed. That number doesn't change in a kernel manager when the min GPU clock reverts to 490.
I'm off on vacation not near a PC but will try to come up with a stock # of clock frequencies that still scrolls smoothly between them and the Adreno GPU driver. May take a few tries but it's quite easy to modify. I already think 180mhz is too low from using it, it's more of a sleep frequency some suggested going this low but I think the phone design is for 300+. I prefer to use more clocks for better throttling but have to work with what we are given and do the best inside those boundaries.
No you can't raise CPU clocks on 865 devices that ROG device is supposedly using the 865+ or whatever the mid device is named between the 865 and 875. They have blocked CPU OC hardware wise for some time now.
mslezak said:
No you can't raise CPU clocks on 865 devices that ROG device is supposedly using the 865+ or whatever the mid device is named between the 865 and 875. They have blocked CPU OC hardware wise for some time now.
Click to expand...
Click to collapse
Qualcomm's Meizu’s CMO Wan Zhiqiang recently commented on Weibo saying that there won’t be a Snapdragon 865 Plus this year.
We will see!
No 865+ this year..
Trust me whatever they call it it's already defined in the source code as a second GPU bin clock for another device ID. So maybe it won't be called an 865+ but there is some device between the 865 and 875 coming out. I have OEM confirmation as well this device exists the name isn't important. I can tell you the top GPU frequency is 670mhz that's it, vs. the 587mhz default on the 865. Still the 865 handles 900mhz GPU no problem the only benefit would be higher CPU clocks. And an extra GPU clock. Which I'll attempt to spoof next time I get near a PC.
mslezak said:
Trust me whatever they call it it's already defined in the source code as a second GPU bin clock for another device ID. So maybe it won't be called an 865+ but there is some device between the 865 and 875 coming out. I have OEM confirmation as well this device exists the name isn't important. I can tell you the top GPU frequency is 670mhz that's it, vs. the 587mhz default on the 865. Still the 865 handles 900mhz GPU no problem the only benefit would be higher CPU clocks. And an extra GPU clock. Which I'll attempt to spoof next time I get near a PC.
Click to expand...
Click to collapse
Is it possible to overclock the memory clock too? I assumed that 900mhz is the core clock.
mslezak said:
Trust me whatever they call it it's already defined in the source code as a second GPU bin clock for another device ID. So maybe it won't be called an 865+ but there is some device between the 865 and 875 coming out. I have OEM confirmation as well this device exists the name isn't important. I can tell you the top GPU frequency is 670mhz that's it, vs. the 587mhz default on the 865. Still the 865 handles 900mhz GPU no problem the only benefit would be higher CPU clocks. And an extra GPU clock. Which I'll attempt to spoof next time I get near a PC.
Click to expand...
Click to collapse
You're right, that makes sense.
I'm glad they are making a refreshed chip.
On another note, do you think we will see an overclocking tool in the future?
Possibly with a custom ROM?