Ok, lots of searching did not have a decent answer, and lots of trial and error seems to have worked.
I needed to get my contacts from my AT&T (Raphael/Fuze) sim card to my new Evo. (I totally walked out of store without them doing this.)
There is no software to do this. (No, I do not have outlook installed and they were on my sim card anyway, not in contacts as I have completely lost my contacts in past...but sim contacts stayed. Wasn't about to tempt that fate again.)
So...easy way...and it is easy...
Go to contacts and use the Menu option to Select Contacts and select all.
Then go to Send Contact and only option I had was beam. (What the heck see what that was.)
This actually sets up a bluetooth beam, but you have to get Evo ready for it.
Turn on Evo, turn on bluetooth
Press the Menu non-button to get Settings option
Select Wireless & networks
Go to Bluetooth settings and make the device discoverable.
Then the two phones find each other.
On the Rapheal there was a 'Tap Here' or something option when it discovered the Evo.
The Evo asked for a code...I just guessed and went with 0000.
Then the Raphael asked for a code and I guessed again at 0000.
Then the transfer started.
I got A TON OF messages...because I got one for every contact (each was a .vcf file).
This is where things get a bit blurry...but I think I tapped on one of the announcements and was asked if I wanted to do something to it with People (or some other file.)
I guessed I wanted it in People so tapped that on the Evo.
Then it popped up a list asking if just that one or all of them. I said all of them.
And voila...all 45 contacts were on my Evo!!! WOO HOO.
Oh...and yes there was one or two that were techically 'Contacts' with a picture..and looks like the pic came across. Have to see what it looks like in a moment...as I wanted to jot my notes before I forgot.
So there you go...that has to be one of the coolest uses I have attempted of bluetooth. (My stereo headset at gym just isn't as cool as beaming data across phones!!!)
Looks like one guy here has complicated answer and another did what I did but didn't explain steps.
HAHA.
http://androidforums.com/tips-tricks-evo-4g/90911-contacts-winmo-evo-instructions.html
Related
Hi new to forum and to the world of the smart phone ( so please be kind )
I picked up my new phone yesterday HTC Desire
so far so good but one thing annoys me that i cant fix
The phonebook is rubbish as it the first name of the person is not the first word in the phone book
as in :- John Smith Mobile is :- Mobile Smith John
is there any way to switch this round ??
Thanks
Funnily enough, I was just about to post some issues about the phone book and you beat me to it!
With regards to the swapping round of first/last names, I think your only option is to go in and manually change each entry. I've had this before and in GMail (I think) is makes a good guess what is first and last name. Sometimes when syncing between devices and the cloud, especially on the first time, the devices don't agree what is first and what is the last name.
Though I hope I'm wrong and you don't have to manually change everything.
Cleargrey said:
Though I hope I'm wrong and you don't have to manually change everything.
Click to expand...
Click to collapse
I am not very good with phones (but I am learning )
I also hope we don't have to manually change as i have over 200 people on my phone book.
Believe me, I feel your pain. I'm decently versed in how syncing contacts can mess up as I've done it to varying degrees on past phones.
I've had all contacts duplicated and had to sit there for the evening deleting contacts. Over dinner, deleting contacts.
I've had to go in manually and correct contacts and change around details.
Probably the biggest piece of advice I can give you or anyone, is:
Before you do anything major, even syncing with a new device, backup (export) your online contacts!
And then:
When you've got your contacts nice and sweet synced between online/mobile device/whatever, backup your contacts!!!
You get a lot more leway for the future!
I had to spend about 40 minutes sorting out my contact list the other day.
Glad I took the time to actually go through and do it, as all my contacts are linked and organised properly, definitely worth doing.
I have just done the same now
how do you put a photo to the number?
stevie_a said:
I have just done the same now
how do you put a photo to the number?
Click to expand...
Click to collapse
Just replied in your thread, but will stick it here too:
People > Tap on the name > Edit > Tap on the camera icon in the top left.
thanks I'm getting there...
Will take a few days to get used to it
Does anyone else have a problem with the some of the contact names 'resetting'?
I originally copied over all contacts from my SIM, and have since linked most of them up to their Facebook profiles. I have set the display name to be the one listed on Facebook, and this works perfectly for the majority.
A couple of contacts keep going back to their name on the SIM, have no idea why...
Not sure how many of us here drive an Audi, but figured I'd give this forum a shot. I posted this question in the car forums, but apparently no one uses Android over there, let alone an Evo. I'm not quite sure if this is a phone specific problem or an Android problem.
So Audi's 3G Multimedia Interface (MMI), uses bluetooth to connect/sync my phone contacts from my phone and displays them on my car's Nav screen. From there I can select names, make calls, etc.
The problem is, I believe that the car is pulling "All Contacts" instead of just "My contacts" from Google. This makes it extremely cumbersome as I have an extra 100 contacts to sift through while I'm driving.
However, my phone itself is setup correctly, as I selected "Only contacts with phone numbers".
I realize Audi's management of phone sync may be different from other car makers, but it may also be the similar. Any ideas?
I'm not sure that there's anything you can do. Mine syncs the entire phonebook also (Audi A4). Sorry to break the bad news.
Yea, that's a bit disheartening. Thanks for the reply though, good to know. Who could we contact to try and get this changed? HTC? Google?
nvius said:
Yea, that's a bit disheartening. Thanks for the reply though, good to know. Who could we contact to try and get this changed? HTC? Google?
Click to expand...
Click to collapse
I am working on the same issue - temp solution - download just the contacts you want into a vcard format, then put them on an SD card and sync. It is much cleaner, but only allows 100 contacts. It worked better for me with addresses also for the nav.
I work for a competing automaker as a dealership technician. We run into this problem and many others with our wireless to vehicle integration system. The best workaround for your particular problem would be to swap your contact lists. Backup all of your contacts to Google. Then delete all of the contacts you don't want sent to the car. Then redownload your phone book to the car. Next, restore your contact list from Google. And finally, reupload only the contacts you want Google to store to the Google cloud.
I know its a lot of steps, but it should provide you with the solution you require. One other thing to keep in mind, if you have an automated phonebook download option in your vehicles interface, it should be deactivated. If it isn't, there's the distinct possibility that the next automatic update will pull all the contacts you just eliminated.
Same issue, using SD instead
I don't know if you found a solution. I am facing the exact same issue on Audi MMI with Samsung Galaxy Note 2. I have been searching up and down and found no clean solution. I am using the SD import workaround. I re-paired my phone and denied the phonebook access so MMI can't download from my phone.
nvius said:
Not sure how many of us here drive an Audi, but figured I'd give this forum a shot. I posted this question in the car forums, but apparently no one uses Android over there, let alone an Evo. I'm not quite sure if this is a phone specific problem or an Android problem.
So Audi's 3G Multimedia Interface (MMI), uses bluetooth to connect/sync my phone contacts from my phone and displays them on my car's Nav screen. From there I can select names, make calls, etc.
The problem is, I believe that the car is pulling "All Contacts" instead of just "My contacts" from Google. This makes it extremely cumbersome as I have an extra 100 contacts to sift through while I'm driving.
However, my phone itself is setup correctly, as I selected "Only contacts with phone numbers".
I realize Audi's management of phone sync may be different from other car makers, but it may also be the similar. Any ideas?
Click to expand...
Click to collapse
I've got a 2012 S4 and just bought the Galaxy S4 (my first android phone, switched from iphone5) and i had the exact same problem. i spent the first two days of ownership of the GS4 googling my heart out trying to figure out WTF.
I have found a permanent solution that works for me but, may not work for you all. reason i say that is, if you rely on google or other accounts to manage your contacts, this will not work for you. the problem is gmail/google, by default any and all emails you send/receive are stored as "contacts" in google. regardless of what settings you have on your phone, when you sync your contacts with audi MMI, it pulls all contacts from both phone and google (possibly other email accounts you have syncing to your phone).
what i did was...
1) go into my google accounts (i have two) and went into the settings and told google that i would "manually add" contacts.
2) i then deleted all contacts from all my google accounts.
3) then i turned contact sync "on" on the phone and synced the phone with google.
4) turned contact sync back off.
the following is within the audi MMI... (the audi MMI does NOT store the contacts synced with your phone, it refreshes the contact list every time it connects to the phone, this is why you cannot access the list immediately after ignition is on).
1) unpaired the phone from MMI.
2) deleted all profiles within the NAME/DIRECTORY menu in MMI (if you get to a point where it asks you for your ID PIN (something along those lines), you will need to enter the last 7 digits of your VIN number.
3) i then repaired the phone, and when the prompt on the phone popped up asking for permission to access contacts, clicked yes and selected to not be prompted again.
after it redownloaded the directory from the phone, only contacts i add to the phone showed up.
WARNING, by deleting the profiles, you will also delete any manually added addresses/locations stored from the MMI as well, i personally can live with this.
Android BT Fix for Audi
Hey there...
New to this forum. Here is a fix for the Phonebook sync for Audi MMI / Android phones. It's an app called Bluetooth Phonebook from the Play store. Download it to your phone and voila...it works.
Hope this helps.
lazernet said:
Hey there...
New to this forum. Here is a fix for the Phonebook sync for Audi MMI / Android phones. It's an app called Bluetooth Phonebook from the Play store. Download it to your phone and voila...it works.
Hope this helps.
Click to expand...
Click to collapse
Quick question, do you gate The contact picture to show on The mmi with tour galaxy?
I am quite frustrated, and wondering if there is a problem with my phone, or if I could have made some sort of unintentional setting change for my SGS2. I have had the phone for 2 weeks with no problems, but all of a sudden today my Google Voice Actions and Vlingo will not work. From my best assessment, it is not hearing my voice or not hearing it well enough to make anything out. Whenever I speak something into the phone -- and I have done this on this phone and my HD2 so I'm not new to speaking my requests -- it will sometimes immediately come back and say "No Matches Found". Once in a while it will open a browser window, and try to searc for 1 or two or three letter gibberish words: i.e. "bh", or "fns", or "g". It certainly does NOT recognize ANYTHING it used to! Just for fun, I downloaded JEANNIE, which seems to be another voice-action-type program. That also does not work. The microphone icon doesn't seem to light up much (which further makes me think it cannot "hear" me, and the program responds with, "pardon?" Phone calls I make are ok -- people can hear me -- just not these programs!! IS there a setting that I could have changed that prevents the programs from hearing my voice?? BTW, I did try to go to the Voice Actions app in MANAGE PROGRAMS and erased data, but that didn't help.
Any help would be greatly appreciated, otherwise I'll take it back to the store and see if they'll exchange it or know what's going on!
Thank you all for your reading this and for your help!
Wingmann
Did you reboot or at least kill and restart the app?
uninstall it and then reintall it i just tested mines and i hav no issuses but ive only had my sinse thursday plus i rooted mines and removed most of the carrier apps
dude vlingo sucks man, the galaxy version is so much better
Does anyone know how, when in car mode, to get VLingo to navigate to a contact (say Home, for example)? You would think this would be a basic function for a hands-free program in car mode, but I can't figure it out. Everytime I say "Navigate to Home", it tries to take me to some Home bakery or something like that. Can I even navigate to an address I give it with this thing?
I know it's been overhyped, but Siri is the one thing from that fruit phone I wish this phone had. Don't get me wrong. I was so close to getting the "other" phone, but opted for the Samsung instead. And after playing around with the iphone, I'm glad I did. But Vlingo seriously makes me want to punch it in the screen sometimes.
Well, I figured out how to get Vlingo to go home. Go to Vlingo->Settings->Voice talk Settings->Home address and type in your home address. Now you can say "Navigate to Home".
But after using it more, I see more problems with it. Vlingo can navigate to restaurants, but not contacts. It can call contacts, but not restaurants. WTF Vlingo?!? Can we get all of the above please in the near future?
I recently bought a new car and promptly linked the phone via BT. Unfortunately the Audi MMI can only sort by surname and with the narrow width in the in-dashboard display my recently called list can often look like this...
McConach...
McConach...
McConach...
which is less than helpful
So the question is, is there a way to have a secondary list, linked to my main list, in someway that can file the names as "Darren McConachie" (ie all one name rather than split into first and surname) and pass that to BT devices?
If you go in to contacts on the phone (the contacts app) not dialer. The click he menu button (three dot on top of eachoher) then settings you have some options there which may help.
Be sure to report back and let us know either way.
PS Get a BMW next time LOL
Yeah been through those settings, everything on my phone is sorted by first name! Looks like something I'll just have to get used to!
I have the same issue. In my old phone i was able to do a bluetooth setup to change the way these contacts where transferred. Even though i think this is an Audi problem, it could be worked around if the GN would deliver the contacts in a different format. This would be a matter of changing things inside the bluetooth stack i guess.
:-(
Martin with the new GN
Edit: Maybe i just crossover first names and last names in my exchange account, where this is coming from. I am only accessing it from the PC otherwise and there is an option to change the sorting so maybe i give that a try - pretty dirty workaround though
It's not happening and I am frustrated.
I just got this system installed two days ago. My Bluetooth connects and I can play music and answer or make calls, but my contacts and phone history will not sync over to the receiver.
I click yes on the dialog box when it asks to transfer the information, but it never transfers. I called Pioneer once but the rep was not much help. He suggested I delete the phone from the receiver and start over again. I did that. I called the installer and he suggested I do that as well as turn Bluetooth on and off. I did that.
I am going to go see the installer Monday if I can't get it figured out. It appears I am doing everything I should be doing but it seems the phone is blocking the transfer. I even tried selecting all my contacts and sharing them with Bluetooth and then the receiver but the send file fails.
Any suggestions as to what might be blocking this sync?
Hey I have the same deck as you and what you are trying to do is not possible for the time I spend with it and if you did manage to sync them what are the benefits? Look at your contact list when you leave your phone behind but can't do anything with said contacts because you don't have a phone? Doesn't make much sense right.
That dialog box that comes up when you first pair with the deck is asking you permission to access the phone contacts and not download/sync them.
When your phone is connected you can push the phone button and will let your scroll through your contact list and press the button again to call. Well that's all I remember what to do when I used the phone part of this deck, which is not a lot.
Hope this cleared some things up.
Also if I'm completely off base and you are having trouble with the contacts not displaying or showing when someone calls, then you got a bad unit.
max53389 said:
Hey I have the same deck as you and what you are trying to do is not possible for the time I spend with it and if you did manage to sync them what are the benefits? Look at your contact list when you leave your phone behind but can't do anything with said contacts because you don't have a phone? Doesn't make much sense right.
That dialog box that comes up when you first pair with the deck is asking you permission to access the phone contacts and not download/sync them.
When your phone is connected you can push the phone button and will let your scroll through your contact list and press the button again to call. Well that's all I remember what to do when I used the phone part of this deck, which is not a lot.
Hope this cleared some things up.
Also if I'm completely off base and you are having trouble with the contacts not displaying or showing when someone calls, then you got a bad unit.
Click to expand...
Click to collapse
Thank you Gilbert for the reply.
When I push any of the phone menu buttons, I don't get any information. It just says "transferring."
I decided to call Samsung yesterday and twice got on remote access, but both times I hit the wrong button on my stereo and the calls were lost. When I called the third time I started speaking with someone who was going to get me back to the remote access department and he asked me how many contacts I was trying to sync over. I told him about 1,800. He said, "Whoa, I can tell you from experience that generally car stereo receivers only sync up to 900 contacts."
So, I worked all night last night on my contacts. They were a mess and even if this doesn't work the guy did me a huge favor because I was able to shave my contact list down to 564 and unlinked them all from old Verizon backup assistant and Microsoft Exchange contacts. It was an ugly job that truly needed to be done.
Anyway, I have not tried to allow access yet. I am going to try in a little while and then I will report back in.
Well, it's been ugly, but things are working out .... weirdly!
After cleaning up my stock contact app, the contacts finally became visible but they are still being linked in with Microsoft Outlook contacts. I have tried every which way for them not to show up. I even deleted everyone of them from my computer and they are still showing up when I Bluetooth the stereo.
Well at least you got it working for you and seemed like you overwhelmed the unit with all those contacts.
But I find that strange that you can't get those contacts from showing up. So you deleted those outlook contacts from your computer but did you on the phone? Also have you disabled contact sync of the outlook account in the settings?
Also you could try to unpair your phone and pair again and see if that helps.