Develop Bugs

Downgrade from JPH to 2.1

Hi all,
Can anyone tell me how (if possible) to downgrade back to 2.1 (JM5 or JM8) successfully as each time i try all i get on the first reboot is an error (cannot see error as to quick) which then reboots?

DemolitionManHD said:
Hi all,
Can anyone tell me how (if possible) to downgrade back to 2.1 (JM5 or JM8) successfully as each time i try all i get on the first reboot is an error (cannot see error as to quick) which then reboots?
Click to expand...
Click to collapse
And you didnt read the big explanation of how to do it in first posts in jm6 (not sure), jm7, jm8 and ji1 threads why?

dupel said:
And you didnt read the big explanation of how to do it in first posts in jm6 (not sure), jm7, jm8 and ji1 threads why?
Click to expand...
Click to collapse
Which post?

DemolitionManHD said:
Which post?
Click to expand...
Click to collapse
Ever heard of search function? Or at least look through 2-3 pages, its not that hard.

dupel said:
Ever heard of search function? Or at least look through 2-3 pages, its not that hard.
Click to expand...
Click to collapse
Not to be funny but looking through there is a number of post referring to this, thats why i ask which one you are referring to

yep. downgrade straight off the bat, JPC is the wicked error rom which raped yer efs

Just page 2 (and when you started this thread - page one) contains 2 topics by the name:
Release: I9000XWJM8 - Multi CSC(s) Europe (and ji1 obviously) with deteiled instructions on how to install, downgrade and possible solutions to problems.

azuresystem said:
yep. downgrade straight off the bat, JPC is the wicked error rom which raped yer efs
Click to expand...
Click to collapse
Is there a way without errors, if i could see the error as it reboots of screen to fast.

Oops. My bad please ignore

format the drive, i.e hardreset it before you reflash pull out yer sim n external SD etc
1 : hard reset
2 : DLmode
3 : flash yer rom
4 : recovery mode
5 : new hardreset
6 : start up yer rom
if you still keep getting errors i have no clue, only managed to get those while the sd still being in the phone and another partition mounted on the sd
best of luck and read the guides

azuresystem said:
format the drive, i.e hardreset it before you reflash pull out yer sim n external SD etc
1 : hard reset
2 : DLmode
3 : flash yer rom
4 : recovery mode
5 : new hardreset
6 : start up yer rom
if you still keep getting errors i have no clue, only managed to get those while the sd still being in the phone and another partition mounted on the sd
best of luck and read the guides
Click to expand...
Click to collapse
Cheers m8

Interesting to know why would want to downgrade to eclair?

Hi, mainly for reference and current issues i have
Sent from my GT-I9000 using XDA App

nandihno said:
Interesting to know why would want to downgrade to eclair?
Click to expand...
Click to collapse
Possibly as JPH sux big time.. just spent hours trying all sorts of combinations and man it spoils the phone.
Hope Samsung get the REAL release working well..
TrOjAn

TrOjAnUK said:
Possibly as JPH sux big time.. just spent hours trying all sorts of combinations and man it spoils the phone.
Hope Samsung get the REAL release working well..
TrOjAn
Click to expand...
Click to collapse
You should try it with the rombie mod. It freakin rocks

Woolios said:
You should try it with the rombie mod. It freakin rocks
Click to expand...
Click to collapse
yes it's awesome, but also a battery monster

azuresystem said:
yep. downgrade straight off the bat, JPC is the wicked error rom which raped yer efs
Click to expand...
Click to collapse
JPH raped my EFS too. I had JPC doing it, fixed it by deleting /efs/nv*. Funny thing is, right after flashing JPH it had my normal nordic product code - but later it had changed to KOR. Very strange. I wonder if it might have happened when I rooted it? Well, anyway, be careful out there, check product code before up/downgrading.

[Q] Can someone create a debrick.img for me (D851)?

Hey guys, I have everything that I need except the files to boot my phone. My phone has been hard bricked for 2 days already and attempting to clean the partition and the hardware bug on my phone. The phone is however unresponsive and cannot go into download mode. So if someone is kind enough and have/created a debrick.img, can you kindly put the img files so I can fix this phone.

I'll hook you up when I get a chance if nobody beats me to it. Having a debrick file on hand is a great idea. Just so other readers know its going to be late tonight when I get time so if you know how you should do it.

ThePagel said:
I'll hook you up when I get a chance if nobody beats me to it. Having a debrick file on hand is a great idea. Just so other readers know its going to be late tonight when I get time so if you know how you should do it.
Click to expand...
Click to collapse
i def want it. dont hold out.

ThePagel said:
I'll hook you up when I get a chance if nobody beats me to it. Having a debrick file on hand is a great idea. Just so other readers know its going to be late tonight when I get time so if you know how you should do it.
Click to expand...
Click to collapse
YES YES YES!
(Breathing Intensifies)

xmagiicsx said:
YES YES YES!
(Breathing Intensifies)
Click to expand...
Click to collapse
can you create one for me too and once I get it how can I put it back to my recovery because right now my phone keeps going to twrp

xmagiicsx said:
YES YES YES!
(Breathing Intensifies)
Click to expand...
Click to collapse
Here you go! Tell me if this works I will have more time tomorrow to trouble shoot the dump if it doesn't work. I trust since you asked for it you know how to properly use it. https://www.androidfilehost.com/?fid=23622183712470742
BACARDILIMON said:
i def want it. dont hold out.
Click to expand...
Click to collapse
Hold off on downloading it until after it is verified as working
jameslee2 said:
can you create one for me too and once I get it how can I put it back to my recovery because right now my phone keeps going to twrp
Click to expand...
Click to collapse
This is not for you, this is for recovering from a bad brick your problem is you tried to update to 10m via ota with twrp installed. You have a couple solutions to fix just not this.

Sure but this is for hard bricked meaning that the sd partition have failed and the phone wont turn on or go into download mode which cause the G3 to be unresponsive

ThePagel said:
Here you go! Tell me if this works I will have more time tomorrow to trouble shoot the dump if it doesn't work. I trust since you asked for it you know how to properly use it. https://www.androidfilehost.com/?fid=23622183712470742
Hold off on downloading it until after it is verified as working
This is not for you, this is for recovering from a bad brick your problem is you tried to update to 10m via ota with twrp installed. You have a couple solutions to fix just not this.
Click to expand...
Click to collapse
Thanks, man! Ill get to work asap

xmagiicsx said:
Thanks, man! Ill get to work asap
Click to expand...
Click to collapse
This is compressed with 7zip. I bet you already figured this out but I understand why some people get confused Just wanted to make sure

ThePagel said:
Here you go! Tell me if this works I will have more time tomorrow to trouble shoot the dump if it doesn't work. I trust since you asked for it you know how to properly use it. https://www.androidfilehost.com/?fid=23622183712470742
Hold off on downloading it until after it is verified as working
This is not for you, this is for recovering from a bad brick your problem is you tried to update to 10m via ota with twrp installed. You have a couple solutions to fix just not this.
Click to expand...
Click to collapse
Hi ThePagel,
What solutions can you provide that would resolve this problem? Thanks

jameslee2 said:
Hi ThePagel,
What solutions can you provide that would resolve this problem? Thanks
Click to expand...
Click to collapse
best options:
http://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386 (input everything EXACTLY you will still be on C)
or if that didn't work
http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667 (read from top to bottom and you will know what your best option is for you)
short term fix:
Factory reset (I think this will work)
or
Install a custom rom via removable sd card or otg cable (If the best options fail at least you have a working phone until you figure it out)

ThePagel said:
Here you go! Tell me if this works I will have more time tomorrow to trouble shoot the dump if it doesn't work. I trust since you asked for it you know how to properly use it. https://www.androidfilehost.com/?fid=23622183712470742
Hold off on downloading it until after it is verified as working
This is not for you, this is for recovering from a bad brick your problem is you tried to update to 10m via ota with twrp installed. You have a couple solutions to fix just not this.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2660566
Using this method. Wish me luck!!!

xmagiicsx said:
http://forum.xda-developers.com/showthread.php?t=2660566
Using this method. Wish me luck!!!
Click to expand...
Click to collapse
Fingers are crossed! if win32diskimager doesn't seem to work try to write it to the card multiple times and if it keeps failing and you have access to linux dd will most definitely work.
If you come to the conclusion the debrick is bad ill make a bigger one and keep doing so until we decide this will work for you or not.

The files aren't working ( I think its me doing something wrong) but I attempt to fix it again in the morning EST. Sorry that I'm a nuisance and wasting your time D:

xmagiicsx said:
The files aren't working ( I think its me doing something wrong) but I attempt to fix it again in the morning EST
Click to expand...
Click to collapse
Did it write to the sdcard? If so I would assume in order to get it to boot you would need to remove the battery and put it back in then hold the volume up + plug it into the computer.

Yea, I'm writing it again and trying to do that method again

xmagiicsx said:
Yea, I'm writing it again and trying to do that method again
Click to expand...
Click to collapse
If it seems to not work ill make a 200,250,300,350,400 mb dumps and send them all your way. If one of them do not work I will dump the entire partition and find out where it is hiding.

ThePagel said:
If it seems to not work ill make a 200,250,300,350,400 mb dumps and send them all your way. If one of them do not work I will dump the entire partition and find out where it is hiding.
Click to expand...
Click to collapse
That seems like a good idea if this method doesn't work. If this method fails, I will start on it tomorrow.

xmagiicsx said:
That seems like a good idea if this method doesn't work. If this method fails, I will start on it tomorrow.
Click to expand...
Click to collapse
Yeah I need to get to bed and have a semi busy day tomorrow. Luckily its all house work and I should find time here and there to take a brake and do some dumps. I cant see it needing to be bigger than 200mb but we will see.

ThePagel said:
Yeah I need to get to bed and have a semi busy day tomorrow. Luckily its all house work and I should find time here and there to take a brake and do some dumps. I cant see it needing to be bigger than 200mb but we will see.
Click to expand...
Click to collapse
Thanks man! This is what it looks like after writing it to disk imager. Don't know if this is correct way or not. Is it possible to create repartition and boot.img into the G3?

[Q] Kernel is not Seandroid Enforcing

On reboots of my phone I get Kernel is not Seandroid Enforcing across the top of my boot screen ,anyone know what's causing this?
Something to be concerned about or a fix (if needed)?

It's normal on 5.1.1 with a non stock kernel, nothing to be worried about.

Lancerz said:
It's normal on 5.1.1 with a non stock kernel, nothing to be worried about.
Click to expand...
Click to collapse
Thanks.

Ignore,sorry.

lurk3r2013 said:
Ignore,sorry.
Click to expand...
Click to collapse
CAN'T .... IGNORE .... MUST POST REPLY .....
Okay, whew, much better now.

lurk3r2013 said:
On reboots of my phone I get Kernel is not Seandroid Enforcing across the top of my boot screen ,anyone know what's causing this?
Something to be concerned about or a fix (if needed)?
Click to expand...
Click to collapse
Lancerz said:
It's normal on 5.1.1 with a non stock kernel, nothing to be worried about.
Click to expand...
Click to collapse
I get it too, but my phone don't reboot tho.
I was on 5.0.1 and then flashed 5.1.1 bootloader and modem (followed guide from XtreStoLite).
Anyone know what to do?
Thanks in advance

Faspaiso said:
I get it too, but my phone don't reboot tho.
I was on 5.0.1 and then flashed 5.1.1 bootloader and modem (followed guide from XtreStoLite).
Anyone know what to do?
Thanks in advance
Click to expand...
Click to collapse
You get this fixed? I had this a few days ago and flashed the whole firmware, recovery and boot and it worked

Need help.
Lancerz said:
It's normal on 5.1.1 with a non stock kernel, nothing to be worried about.
Click to expand...
Click to collapse
So I have the same thing for my sprint galaxy s6 5.1.1 . Its rooted (obviously ) but i wanted to know if there was a way to remove the root and put everything back to normal without losing all my data. I can't connect to the google play store at all (check connection and try again). This is the main reason i want it to go back to normal. I used the unroot option in the supersu and tried uninstalling but i keep getting uninstall unsuccessful. I turned off oem unlocking and usb debugging. I dont know what else to do and im new to the site and dont know where to go for help so im posting here. Thanks in advance.

Lancerz said:
It's normal on 5.1.1 with a non stock kernel, nothing to be worried about.
Click to expand...
Click to collapse
Hello , it is normal also the smart manager in device protection keep threat found and the red shield ??
TKS!!:good:

same message for me, but all works fine.
1. is it causing a longer start time for the phone?
2. can we get rid of the message anyway?

Mine too, after rooted and flashing 5.1.1. If anyone know how to get rid of it, much appreciated.

Is this the cause of my private mode not working? How can I fix this issue

3RAN7ON said:
You get this fixed? I had this a few days ago and flashed the whole firmware, recovery and boot and it worked
Click to expand...
Click to collapse
I have the exact same issue, so how did you fix it? Exact details would be very helpful!

3RAN7ON said:
You get this fixed? I had this a few days ago and flashed the whole firmware, recovery and boot and it worked
Click to expand...
Click to collapse
Hi, im having the same issue on the same ROM. When you say you flashed the stock fimrware, do you mean the stock S6 software?

3RAN7ON said:
You get this fixed? I had this a few days ago and flashed the whole firmware, recovery and boot and it worked
Click to expand...
Click to collapse
I try to flash stock firmware through Odin but get a fail notification. I want to return to complete stock and unroot... no clue what's going on ?

prmntxmanny said:
I try to flash stock firmware through Odin but get a fail notification. I want to return to complete stock and unroot... no clue what's going on
Click to expand...
Click to collapse
I got the same problem, i am going to load latest fw on it but i dont want to lose my internal storage but i cant boot phone

Solution!
flipper2006 said:
I got the same problem, i am going to load latest fw on it but i dont want to lose my internal storage but i cant boot phone
Click to expand...
Click to collapse
Procedure: On KIES3 go to Tools - Firmware Upgrade and Initialisation, Put the Model and Serial, Preceed to put the cellphone on download mode and restore the phone and is Solved!

prmntxmanny said:
I try to flash stock firmware through Odin but get a fail notification. I want to return to complete stock and unroot... no clue what's going on
Click to expand...
Click to collapse
restore your phone with kies that will install stock firmware

I have the same problem (same exact phone) can somebody help? I don't know what to
:crying:
lurk3r2013 said:
On reboots of my phone I get Kernel is not Seandroid Enforcing across the top of my boot screen ,anyone know what's causing this?
Something to be concerned about or a fix (if needed)?
Click to expand...
Click to collapse

hi guys, i have the same message when i swich on the phone "Kernel is not seandroid enforcing but i can't reboot the phone, i tried it from the setting (It's not working) so i try buy another way the on/off button + the button sound down (it's not working too) could you help me please?

Wifi broken/continuously scanning Network

need help from someone, anyone..
I flashed linage os 14.1, then back to oxygen os.. after that the wifi doesn't show any signals, it just searches none stop..
Tried flashing multiple ROMs *hydrogen*, *oxygen*, *remix*, *linage*
through TWRP, and by ADB side load..
Tried flashing the firmware and modem for current ROM im using.. still no luck..
also stock kernels, and ElementalX..
nothing.. need help..
Anybody came across this or have any suggestions?

Even after clean flashing a ROM?

robogo1982 said:
Even after clean flashing a ROM?
Click to expand...
Click to collapse
even after clean flashing mate

r3mixXDA said:
even after clean flashing mate
Click to expand...
Click to collapse
Odd.
Try using the Mega Unbrick guide to fully return your phone to stock and then try with the latest OOS. If it still doesn't work, maybe best to file a support ticket.

robogo1982 said:
Odd.
Try using the Mega Unbrick guide to fully return your phone to stock and then try with the latest OOS. If it still doesn't work, maybe best to file a support ticket.
Click to expand...
Click to collapse
tried that too bro, and restored it to stock, still no wifi in sight,
no clue whats happening really

r3mixXDA said:
tried that too bro, and restored it to stock, still no wifi in sight,
no clue whats happening really
Click to expand...
Click to collapse
install the app matlog and look if there is something with wifi.
Select filter level error.

MarcoLK said:
install the app matlog and look if there is something with wifi.
Select filter level error.
Click to expand...
Click to collapse
what would i be looking for in the log, i dont see anything relating to the wifi itself,
followed you instruction but nothing shows an error with the wifi

After rooting my camera doesn't work anymore:(

hey guys
So I rooted my Exynos S20 Plus after updating it to ATE6 . Since then when I try to open camera I just get "camera error" even after restart.
I tried to use the Samsung service menu and get "unable to connect to camera service" there
Anyone else experienced this and might be able to help?
Thanks!

Did you try resetting your phone once?
If it doesn't work reflash the rom with odin

RohanKalra97 said:
Did you try resetting your phone once?
If it doesn't work reflash the rom with odin
Click to expand...
Click to collapse
Hey,
thanks for your answer.
When reflashing original firmware: Camera works.
When flashing the "vbmeta_disabled.tar" in USERDATA and the modified "KERNEL-G988BXXS2ATD5" (with Mgisk manager) as AP the camera no longer works, even after two full resets via recovery.

mautz001 said:
Hey,
thanks for your answer.
When reflashing original firmware: Camera works.
When flashing the "vbmeta_disabled.tar" in USERDATA and the modified "KERNEL-G988BXXS2ATD5" (with Mgisk manager) as AP the camera no longer works, even after two full resets via recovery.
Click to expand...
Click to collapse
"KERNEL-G988BXXS2ATD5" is for the older firmware. Please wait and it will be updated for the latest firmware.

If you follow the instructions you can make your own boot.img to suite ATE6. That will fix your camera issues
https://forum.xda-developers.com/galaxy-s20/development/howto-root-phone-s20-t4067649

RohanKalra97 said:
"KERNEL-G988BXXS2ATD5" is for the older firmware. Please wait and it will be updated for the latest firmware.
Click to expand...
Click to collapse
Wow. Sometimes I dont know if my brain is actually active and running or if its just melted or sth.
When I flashed the kernel I "checked" the number and was "ah great, the same". But well I somehow still mixed them up.
After manually packing the new boot image it worked
THANKS!!!!!!!!!

heslo.rb26 said:
If you follow the instructions you can make your own boot.img to suite ATE6. That will fix your camera issues
https://forum.xda-developers.com/galaxy-s20/development/howto-root-phone-s20-t4067649
Click to expand...
Click to collapse
Thanks, those worked like a charm!
If the image could be beneficial to someone please tlel me and will attach!