Develop Bugs

[Q] Recovery Problem

I tried to update my EVO radio this mornig. Now everytime I turn on my phone, it gets stuck in the boot animation. When I reboot to recovery, I get hboot, but when I choose recovery, it gets stuck on white HTC screen. I tried fastboot but after three re-installs of SDK, it still give me a this application fails to start because AdbWinApi.dll was not found. PLEASE SOMEONE HELP!!!!!

captainphoenixx said:
I tried to update my EVO radio this mornig. Now everytime I turn on my phone, it gets stuck in the boot animation. When I reboot to recovery, I get hboot, but when I choose recovery, it gets stuck on white HTC screen. I tried fastboot but after three re-installs of SDK, it still give me a this application fails to start because AdbWinApi.dll was not found. PLEASE SOMEONE HELP!!!!!
Click to expand...
Click to collapse
Have you tried using an RUU?

How do I load it to my device?

captainphoenixx said:
How do I load it to my device?
Click to expand...
Click to collapse
You don't load it to your device. Plug phone in with usb to computer. Launch RUU.exe and see if RUU finds the phone. If it does, then follow onscreen instructions.. Make sure phone is powered on when you launch RUU otherwise it will not recognize... Phone can be on white screen and still possibly be recognized depending on exactly what the problem is... If it is recognized follow onscreen instructions and at the end your phone will work again.

leenypost said:
You don't load it to your device. Plug phone in with usb to computer. Launch RUU.exe and see if RUU finds the phone. If it does, then follow onscreen instructions.. Make sure phone is powered on when you launch RUU otherwise it will not recognize... Phone can be on white screen and still possibly be recognized depending on exactly what the problem is... If it is recognized follow onscreen instructions and at the end your phone will work again.
Click to expand...
Click to collapse
If this method doesn't work you need to figure out how to get adb to work again.

Can you get to bootloader? When powered down hold volume down and power button at the same time...if so you can use the 3.30 pc36img posted somewhere in here or I have a copy with Amon recovery....if your rooted.

I Have Amon recovery, but after the update, it still gets stuck, and yes i can get to bootloader, just cant recover or flash

captainphoenixx said:
I Have Amon recovery, but after the update, it still gets stuck, and yes i can get to bootloader, just cant recover or flash
Click to expand...
Click to collapse
If you can get to bootloader an RUU should work for you. Give it a shot.
Here's a link to the thread. RUU link is in first post. Download it and follow the instructions I gave you earlier.
http://forum.xda-developers.com/showthread.php?t=874091
This is the newest RUU though that you flashed the radio from.. Once you get it working you will have to wait on a Root method that works to re-root the phone. Shouldn't be long. You can try an earlier RUU if you want but you'll have to find that in the Rom Sticky Post.

All you gottado is.put the pc36img on the root of your card and the bootloader will read it for you. Just let it run....
Sent from my PC36100 using XDA App

lawnguy said:
All you gottado is.put the pc36img on the root of your card and the bootloader will read it for you. Just let it run....
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yep, that should work too. I forgot about that as I frequently just RUU'd and then re-rooted, LOL... Good call.
Get a pc36img.zip, place it on the SD card (not in a folder) and start up bootloader. The rest will be taken care of automatically.

If I was at home id send you one with Amon Ra its saved me a bunch if you don't get it tonight I can send it to you tomorrow ... I will keep checking this thread
Sent from my PC36100 using XDA App

[Q] Bricked my DHD, please help :(

Let me just start off by saying poop.
I've been reading up on these forums quite a lot, equipping myself with enough knowledge to get going on using this phone to its potential.
After the anticipation of getting my DHD, I went about rooting it. I used this guide: http://forum.xda-developers.com/showthread.php?t=841076.
Everything went fine without much trouble. I completed all the steps in rooting it and gaing SU access. Also installed the Clockwork Recovery mod without a hiccup. I went on to install the Android Revolution ROM and going through the guide I used a tool called: 'Easy Wipe Upgrade.'
After installing this zip, the phone reboot and it just refuses to budge. Stuck on the HTC splash screen.
I've held down the bottom volume button with power and it gets me into HBOOT. I've tried a variety of option such as factory resets and nothing seems to be working.
My luck and phones. Just have a very expensive brick now sitting on my desk. Ah
I'd appreciate any help I can get please. Thanks.

I managed to resolve it!
Just FYI. Mounted the USB (Which was hidden fairly deeply) I guess you don't look when you panic? I then dropped on the ROM and installed it and boot up took a while but voila, it worked!

Well done, I would go mental if I bricked my phone. That's why I am still just reading up rather than trying things.
Sent from my Desire HD using XDA App

in the exact same situation as you where Could you go into abit more detail how you resolved this? currently have no phone cheers

whats wrong with your phone mate

Just so you know, as long as you have access to the bootloader (can be stock bootloader with S-ON, doesn't matter), 99% of the time you can 'unbrick' your phone by installing a stock RUU (PD98IMG.zip method) which returns your phone to complete stock.
If you install the wrong RUU while ENG HBOOT S-OFF then you can potentially fudge up your phone for good (unless you have Radio S-OFF, then you are fine - just install the correct RUU).
So don't worry, because there is nearly always a way to go back to how your phone was before you started hacking it.

prank1 said:
Just so you know, as long as you have access to the bootloader (can be stock bootloader with S-ON, doesn't matter), 99% of the time you can 'unbrick' your phone by installing a stock RUU (PD98IMG.zip method) which returns your phone to complete stock.
If you install the wrong RUU while ENG HBOOT S-OFF then you can potentially fudge up your phone for good (unless you have Radio S-OFF, then you are fine - just install the correct RUU).
So don't worry, because there is nearly always a way to go back to how your phone was before you started hacking it.
Click to expand...
Click to collapse
Here is a link to the pd98img.zip method if anyone wants it for reference.

thanks for the replies got it fixed as explained above cheers

DarkShadowAy said:
I managed to resolve it!
Just FYI. Mounted the USB (Which was hidden fairly deeply) I guess you don't look when you panic? I then dropped on the ROM and installed it and boot up took a while but voila, it worked!
Click to expand...
Click to collapse
My DHD is not starting up after i have applied s-off tool and the orange led light is on without pluggin in , by mounting USB can cure my problem ??
PLEASE HELP !!

dr.m0x said:
Here is a link to the pd98img.zip method if anyone wants it for reference.
Click to expand...
Click to collapse
hey guys, hope u could help me out.. i tried this RD1945's method.. got an ruu file, renamed the ruu file, then i put it on my micro sd card using a reader, then i plug it back in my phone, run hboot, the hboot parsed the zip file which i renamed according to the steps.. after it parsed it brought me back to the fastboot, recovery, restore factory defaults menu, etc... which i then chose fastboot then reboot... it reboots but im still stuck at the htc white splash screen for some time now.. what am i doin wrong? does it take long to start? sorry im a noob can someone explain to me how its done properly?

agonize said:
hey guys, hope u could help me out.. i tried this RD1945's method.. got an ruu file, renamed the ruu file, then i put it on my micro sd card using a reader, then i plug it back in my phone, run hboot, the hboot parsed the zip file which i renamed according to the steps.. after it parsed it brought me back to the fastboot, recovery, restore factory defaults menu, etc... which i then chose fastboot then reboot... it reboots but im still stuck at the htc white splash screen for some time now.. what am i doin wrong? does it take long to start? sorry im a noob can someone explain to me how its done properly?
Click to expand...
Click to collapse
You are not supposed to rename the RUU file, rather you run the RUU file and then afterwards locate the ROM.zip file located in your temp folder. This ROM.zip file is meant to be renamed PD98IMG.zip, NOT the RUU file.

ok that was stupid of me.. ok will try to give it a go..

sorry if this sounds stupid to you again.. but, i just wana be sure.. its my first smartphone..
anyway, i run the ruu file on my pc, yeah? so then when i run it, it asks me to connect my dhd using the usb cable.. so i did... but it couldnt detect my phone.. thus, it couldnt continue it's setup.. ;-( thank you for helping out..

Make sure you install HTC Sync, it should also install all the DHD USB drivers needed.

hey, do you have any step by step guide on doing this? im afraid il do something wrong again and just risk messing up the phone even more..
i have htc sync and the htc drivers on my laptop but when i connect the usb plug to my phone and try to run the ruu.. it still gives me the prompt of no connection from the pc and android phone.. :-| what am i doing wrong? sorry...
thanks in advance for the any help!

i managed to get to the update part.. but now it prompts a 131 error message.. :-( help?

http://forum.xda-developers.com/showthread.php?t=841890
Did u have a Look here...this shows the method and its very self explanatory

[Q] Evo Sprint can't boot in, how to install recovery?

My Evo can't boot in android, it just turn on and restart after the Evo logo appear. And when I press power + volume down button I go in hboot mode, click on recovery and after that it's freeze with a picture of a phone , an "!" in a triangle.
I wonder If I can install recovery in this case or not? and how?
I've download PC36IMG.ZIP and supersonic recovery with sdk tool, so how anyone please help me, I need to try to install another ROM to sure it's hardware problem or ROM problem.

If you give me ten minutes I will attach it for you when I get to lappy.
Edit: Tada. Boot into the bootloader, select yes to update and then reboot.

teh roxxorz said:
If you give me ten minutes I will attach it for you when I get to lappy.
Edit: Tada. Boot into the bootloader, select yes to update and then reboot.
Click to expand...
Click to collapse
thank you for your help.
but is PC36IMG.zip needed to put into the sdcard, right?
no rename, just update?
I'l try and tell you the result.
btw, one more 'thank'!

kaizvn said:
...but is PC36IMG.zip needed to put into the sdcard, right?...
Click to expand...
Click to collapse
yes, put on sdcard, allow bootloader to read and update and you are good to go as far as recovery is concerned. good luck!

agentphantom said:
yes, put on sdcard, allow bootloader to read and update and you are good to go as far as recovery is concerned. good luck!
Click to expand...
Click to collapse
excuse me agentphantom, I've install go to bootloader and run that file, but I still can not access the recovery to flash rom.
anymore suggestion?
p/s: may I know what is the pc36IMG used for?

kaizvn said:
excuse me agentphantom, I've install go to bootloader and run that file, but I still can not access the recovery to flash rom.
anymore suggestion?
p/s: may I know what is the pc36IMG used for?
Click to expand...
Click to collapse
The PC36IMG is the system file the bootloader recognizes as like a system updater. And did you select update and then to reboot, once prompted?

teh roxxorz said:
The PC36IMG is the system file the bootloader recognizes as like a system updater. And did you select update and then to reboot, once prompted?
Click to expand...
Click to collapse
sorry but I don't see the "update" to choose.
I press power + volume down button => it take me to the hboot interface.
The menu there are : fastboot - recovery - clear storage - simlock - hboot usb.
5s later it start to run the PC36IMG file with no notification and log, very fast and disappear.
So, what would I do now?

kaizvn said:
sorry but I don't see the "update" to choose.
I press power + volume down button => it take me to the hboot interface.
The menu there are : fastboot - recovery - clear storage - simlock - hboot usb.
5s later it start to run the PC36IMG file with no notification and log, very fast and disappear.
So, what would I do now?
Click to expand...
Click to collapse
Two things to double check, to be sure that that the bootloader will recognize PC36IMG. 1) the PC36IMG must be named exactly that. It has to be capital letters, and you do not want it to say PC36IMG.zip, just PC36IMG. The phone automatically recognizes and labels it as a zip file. So if you named it PC36IMG.zip, it will ultimately be named PC36IMG.zip.zip, and will not be recognized.
2) Be sure that the PC36IMG is on the root (main directory) of your SD card, and not within any folders. It won't be recognized if it is in a folder.
If you make sure of those two things, then the bootloader should scan and find the PC36IMG, and instead of seeing it searching and the green lettering pop up, then disappear, you will see it ask you if you want to update, use volume up to select yes. Hope that helps you out.
Edit: And yes, I went to download the PC36IMG attatched above in this thread, and it is indeed labeled PC36IMG.zip. Rename it to PC36IMG (just remove the .zip) That should take care of it.

Also, I never saw this confirmed in the thread, but you were previously rooted and had a custom recovery prior to this problem, correct? And you are indeed s off at the bootloader?

k2buckley said:
Two things to double check, to be sure that that the bootloader will recognize PC36IMG. 1) the PC36IMG must be named exactly that. It has to be capital letters, and you do not want it to say PC36IMG.zip, just PC36IMG. The phone automatically recognizes and labels it as a zip file. So if you named it PC36IMG.zip, it will ultimately be named PC36IMG.zip.zip, and will not be recognized.
2) Be sure that the PC36IMG is on the root (main directory) of your SD card, and not within any folders. It won't be recognized if it is in a folder.
If you make sure of those two things, then the bootloader should scan and find the PC36IMG, and instead of seeing it searching and the green lettering pop up, then disappear, you will see it ask you if you want to update, use volume up to select yes. Hope that helps you out.
Edit: And yes, I went to download the PC36IMG attatched above in this thread, and it is indeed labeled PC36IMG.zip. Rename it to PC36IMG (just remove the .zip) That should take care of it.
Click to expand...
Click to collapse
I do in correctly, download the file at #2, put in root and go to bootloader.
I see the green line run on screen but havce no confirm form Update or not.
My phone is not rooted, no recovery, can't boot into android ROM, just start and restart at EVO logo.
Help me to install recovery to flash another ROM, I hope it will wake up my phone.

Okay so it was never rooted? What did you do right before your phone stopped working?

do nothing
this is my friend's phone.
He give me to try to flash a new rom for it.
but it's not root or recovery....

Okay so it wasn't working when he gave it to you right?

kaizvn said:
do nothing
this is my friend's phone.
He give me to try to flash a new rom for it.
but it's not root or recovery....
Click to expand...
Click to collapse
If you're s on and not rooted yet, I dont think you'll just be able to flash recovery. You need to root it first, then flash recovery. You should download an RUU or a PC36IMG of a factory rom. That will get you back to stock. From there, you can run Unrevoked to root it first though (you need to be rooted to flash roms). I will attatch a link with all of the PC36IMG's (you run from bootloader) and RUU's (you run from computer). You can use either method to get the phone back to stock condition (what I recommend). You will at least be able to boot then. From there you can decide if you want to root it and flash a ROM. Read up a bit more also, it will benefit you.
http://forum.xda-developers.com/showthread.php?t=884060&highlight=hboot-0.97+ruu

k2buckley said:
If you're s on and not rooted yet, I dont think you'll just be able to flash recovery. You need to root it first, then flash recovery. You should download an RUU or a PC36IMG of a factory rom. That will get you back to stock. From there, you can run Unrevoked to root it first though (you need to be rooted to flash roms). I will attatch a link with all of the PC36IMG's (you run from bootloader) and RUU's (you run from computer). You can use either method to get the phone back to stock condition (what I recommend). You will at least be able to boot then. From there you can decide if you want to root it and flash a ROM. Read up a bit more also, it will benefit you.
http://forum.xda-developers.com/showthread.php?t=884060&highlight=hboot-0.97+ruu
Click to expand...
Click to collapse
thank you very much!
I'll try anything to wake up it, I thing it's not the Hardware problem because the phone can start but can't go in the OS. But, mine is Sprint CDMA Evo, do you have any CDMA stock ROM for me to download and flash?

kaizvn said:
thank you very much!
I'll try anything to wake up it, I thing it's not the Hardware problem because the phone can start but can't go in the OS. But, mine is Sprint CDMA Evo, do you have any CDMA stock ROM for me to download and flash?
Click to expand...
Click to collapse
It's not a hardware problem, well, most likely not. Download a PC36IMG from the link I provided for you. It's hard to say which one you need, but try this one first. http://db.tt/gqTAPS1. That is a factory, unrooted ROM for the Evo. It is the latest software, 3.70. It may or may not work for you (you may need an older one, but not sure) What you need to do is download that file, rename it exactly PC36IMG. Put it on the main directory of your SD card. Shut the phone off completely. Hold Volume down and Power simultaneously until you reach the bootloader. At this point, the bootloader should scan the sd card, find the pc36img and ask you to update. You would then press volume up to select yes. Once it starts, let it run through its course. It should take a few minutes to complete, and you will see a couple different screens. whateveer you do, dont pull the battery while it's updating, and be sure you're battery has some charge on it, so it doesnt die in the process. I hope that helps. If that update successfully completes, the phone should be exactly how it came out of the box. Factory Rom. Good luck.

k2buckley said:
It's not a hardware problem, well, most likely not. Download a PC36IMG from the link I provided for you. It's hard to say which one you need, but try this one first. http://db.tt/gqTAPS1. That is a factory, unrooted ROM for the Evo. It is the latest software, 3.70. It may or may not work for you (you may need an older one, but not sure) What you need to do is download that file, rename it exactly PC36IMG. Put it on the main directory of your SD card. Shut the phone off completely. Hold Volume down and Power simultaneously until you reach the bootloader. At this point, the bootloader should scan the sd card, find the pc36img and ask you to update. You would then press volume up to select yes. Once it starts, let it run through its course. It should take a few minutes to complete, and you will see a couple different screens. whateveer you do, dont pull the battery while it's updating, and be sure you're battery has some charge on it, so it doesnt die in the process. I hope that helps. If that update successfully completes, the phone should be exactly how it came out of the box. Factory Rom. Good luck.
Click to expand...
Click to collapse
thank you k2, I'm downloading and will flash it A.S.A.P, I'll tell you the result.

Bit off topic but not really...
My EVO was rooted running cm7 with the latest clockwork gotten from and installed from rom manager.
Ran fine for about a week. Then right after pressing send on a replied email, reboot!
Crap I thought I was gonna have to retype the whole thing again...
Nope, it turns out the email had enough time to send but the phone never did reboot.
Just got itself in a loop. White HTC logo, vibrate, white htc logo,vibrate...
Could get to boot loader but when trying to access recovery I would go back into the same loop.
Kinda gave me the impression that the recovery partition was corrupted.
I was already out so I thought "what the hell" and took it to the sprint store. The tech was looking and working on the thing for literally over an hour on my phone (took about 3 hours from when I brought it in). Then finally the tech came out and asked for me. I was positive he had finally figured out it was rooted and was gonna tell me to screw off. Well, instead he said "honestly, I can't figure out what the heck is wrong with this thing, I'm just going to replace it for you,I'll be right back".
OK so now I'm expecting a refurbed phone with my battery and ad card shoved in it. He came back with a new EVO box...
Then he handed me the new one with the 8gb (I only had a 2 in mine) card and the original battery (I have the extended one). Then he said "your card battery charger and everything else is in the box".
SCORE! Haha sometime I actually like sprint...
Moral of the story: if all else fails take it to the store.s
Sent from my PC36100 using XDA Premium App

Dang that's awesome! yeah every store I've been to has been more than happy to just throw a new phone at me haha

[Q] Possible Bricked Phone

My phone is stuck at the white Evo splash screen. This happenned after I performed the autoroot procedure located at: http://forum.xda-developers.com/showthread.php?t=838448
I have tried all kinds of ways to bring it back with no success. I downloaded shipped roms 3.30 and 3.70 (3.70) is what my phone originally was. The RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed.exe will not run on my windows 7 machine I assume it's corrupted and I have downloaded it from two different sources. The RUU_SuperSonic_S_Sprint_WWE_3.30.651.3_Radio_2.15.00.09.01_NV_1.77_003_release_157088_signed.exe runs but it always tells me that my battery is below 30% even though I plug the phone in to the charger and after a few minutes the LED turns green. Then I tried downloading the 3.70 rom as a zip file, named it pc36100.zip, put it in the root of my sd card, then I went into recovery mode and I told it to start the update. It looks like it works but I get a message at the end that says "partition update fail!" and then it asks me to reboot and I'm right back at the endless white evo splash screen. I even tried to load several times using the evo-recovery where I was able to pick which image I wanted to phone to update but it fails with a symlink error of some sort.
I'm stuck. Any help would be appreciated here.
Thanks

Try PC36IMG from here http://forum.xda-developers.com/showpost.php?p=8097472&postcount=1

deeztech said:
My phone is stuck at the white Evo splash screen. This happenned after I performed the autoroot procedure located at: http://forum.xda-developers.com/showthread.php?t=838448
I have tried all kinds of ways to bring it back with no success. I downloaded shipped roms 3.30 and 3.70 (3.70) is what my phone originally was. The RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed.exe will not run on my windows 7 machine I assume it's corrupted and I have downloaded it from two different sources. The RUU_SuperSonic_S_Sprint_WWE_3.30.651.3_Radio_2.15.00.09.01_NV_1.77_003_release_157088_signed.exe runs but it always tells me that my battery is below 30% even though I plug the phone in to the charger and after a few minutes the LED turns green. Then I tried downloading the 3.70 rom as a zip file, named it pc36100.zip, put it in the root of my sd card, then I went into recovery mode and I told it to start the update. It looks like it works but I get a message at the end that says "partition update fail!" and then it asks me to reboot and I'm right back at the endless white evo splash screen. I even tried to load several times using the evo-recovery where I was able to pick which image I wanted to phone to update but it fails with a symlink error of some sort.
I'm stuck. Any help would be appreciated here.
Thanks
Click to expand...
Click to collapse
I would also try running the RUU and PC36IMG a couple more times, maybe download them from a different source. Do you have HTC sync installed on your computer? I believe it's needed to use the RUU. So if you pull your battery out, reinsert it, then plug your Evo into a wall charger, the light goes steady green after a few minutes? Strange, I'd try a different RUU. Did you download from here? http://forum.xda-developers.com/showthread.php?t=884060&highlight=hboot-0.97+ruu . I haven't experienced problems like this before (fortunately) but I've also read about people needing to format their SD card before it would work, using the PC36IMG. Not sure why, but possibly something corrupted on the SD card? Did the auto root give you any sort of errors or anything? Or did it just appear to work, and then this happened?
Also, you could try running the RUU from fastboot mode. Boot to the bootloader, select 'fastboot', and then try the RUU

HTC Sync is indeed needed for the RUU in .exe form.
Boot into hboot by holding down the volume down button while turning on your phone. I believe you choose hboot USB and then run the RUU exe.

k2buckley said:
I would also try running the RUU and PC36IMG a couple more times, maybe download them from a different source. Do you have HTC sync installed on your computer? I believe it's needed to use the RUU. So if you pull your battery out, reinsert it, then plug your Evo into a wall charger, the light goes steady green after a few minutes? Strange, I'd try a different RUU. Did you download from here? http://forum.xda-developers.com/showthread.php?t=884060&highlight=hboot-0.97+ruu . I haven't experienced problems like this before (fortunately) but I've also read about people needing to format their SD card before it would work, using the PC36IMG. Not sure why, but possibly something corrupted on the SD card? Did the auto root give you any sort of errors or anything? Or did it just appear to work, and then this happened?
Also, you could try running the RUU from fastboot mode. Boot to the bootloader, select 'fastboot', and then try the RUU
Click to expand...
Click to collapse
The fastboot method worked! Awesome. So, in the hboot menu, it says S-OFF, which I assume means it's rooted. If that's the case, then I can push any rom I want on top of it now, correct?

deeztech said:
it says S-OFF, which I assume means it's rooted. If that's the case, then I can push any rom I want on top of it now, correct?
Click to expand...
Click to collapse
Correct. You can copy any ROM (suggesting nandroid backup first) to SD card and flash it

deeztech said:
The fastboot method worked! Awesome. So, in the hboot menu, it says S-OFF, which I assume means it's rooted. If that's the case, then I can push any rom I want on top of it now, correct?
Click to expand...
Click to collapse
Sweet, I'm glad it worked for you. So it says you're S off, even after running the RUU? I've never used the Autoroot method, but it must flash unrevoked forever, somewhere in the process. Well, if it says you're S off, I believe the only thing you're missing before you can flash anything is a custom recovery, which you most likely do not have, after running RUU. I believe that since you're s off, you can just flash a custom recovery from the bootloader, and then flash a rom. You could also use ROM manager to flash a recovery, you'd just need to download and install the Super User app, I believe. I think that should work for you? I've never tried to just flash a recovery from a stock ROM, right after an RUU, but if you're s off, i dont see why you can't do that. Download the PC36IMG I attatch here, make sure its named PC36IMG, put it on the main directory of your sd card, boot to the bootloader. Let it scan and ask you to update. Select volume up for yes. After that's done, you should have custom Amon Ra V2.3 recovery. From there, you 'should' be able to flash ROMs. good luck.
Edit: wouldn't let me upload the PC36IMG for some reason. Instead, click this link to download. http://db.tt/7jGH2CA

erik077 said:
Try PC36IMG from here http://forum.xda-developers.com/showpost.php?p=8097472&postcount=1
Click to expand...
Click to collapse
Uhh no. That PC36IMG.zip is waaay outdated. You know they are all different, right? Just because it's a PC36IMG.zip does NOT mean it's the same file as the next one.

I used that one in two situations...
1. when my friend phone was bricked
2. when did unroot
both times that file worked for me

erik077 said:
I used that one in two situations...
1. when my friend phone was bricked
2. when did unroot
both times that file worked for me
Click to expand...
Click to collapse
I did as you suggested and installed the custom recovery. Worked beautifully! I was able to install the MIUI rom and it's a beautiful thing. Thanks a lot for all your help.

Np, that's why we here
Sent from my PC36100 using XDA App

help!!!!
im stuck on step 8 my phone is showing the red triangle with the ! the DOS promt says...
waiting for the phone...
found the phone connected as 'recovery'
setting up a temporary recovery...
**daemon still not runningerror: cannot connect to daemon
*daemon not running. starting it now on port 5037 *
*daemon started successfully *
**daemon still not runningerror: cannot connect to daemon
what do i do?

I cant believe it!!!

Ok! So i was running fresh 3.5 on my evo 4g and everything was running great. I decided that I wanted to add a battery percent on the battery indicator. I download a zip file that would allow me to do that...I put it on the root of my sd. I tried flashing it with clockwork mod 3.0 but it didnt let me cuz it came up with an error saying to update my binary and script. So i googled on how to bypass that error and it said to use the ra recovery(the other recovery program,i think thats what its called ) so i flashed ra with rom manager. I rebooted my evo and went into recovery and flashed the zip file then a couple of minutes later it said it was complete(no errors came up during the flashing process). I rebooted my evo after the flashing was done. This is where it starts getting weird! I turned my phone back on and after the white screen a black screen came up and didnt go away. After about a minute the phone vibrated about 4 times and the indicator light started flashing green. I couldnt power down so I had to take out the battery. I turned it back on and it booted up to the fresh boot logo. It tried to reboot itself about 3 times and without success the black screen came up and vibrated with flashing green light. Took the battery out for an hour then I booted it to the boot menu, went into recovery to try to delete the zip file and all it did was give me the black screen, vibrated and flashing green lights. I checked to see if s-off was still engaged and it wasnt. S-on was showing. I think some how that zip file made that happen. I have a nandroid backup. I dont have recovery and s-on is engaged. What should I do? This is the file that I flashed( smooth-sense_evo1.0.2_batteryonly ) Sorry if Iam posting this in the wrong section. Any help would be appreciated. Thanks

Holy Wall-O-Text Batman!
But getting to your issue:
You enabled security again. Flash the stock RUU found in the most up-to-date unrooting guides and go back to stock. Re-root again using Unrevoked and then flash again. Mind you, you will be starting over more or less.
The reason why I'm telling you to unroot and then root again is that you want to get rid of that funky flash. Its the safest way possible.

So I need to unroot first (even though it says s-on)
Then root again with unrevoked
Then flash stock ruu

Flashing the RUU should unroot for you. It will undo any mods except for s-off from unrevoked.

Still no luck.
This is what i have done.
Ive tried rooting again using unrevoked 3 but it doesnt pick up my evo when i plug in my phone. It does come up in my device manager but its not assigned a drive letter. Yes i did enable hboot usb. Yes my drivers are installed right.
Ive tried different ruu's but they wont detect my evo. Ive tried different stock PC36IMG's and they will update with no errors but when it reboots into the the screen with green arrows and a phone it vibrates 4 times then turn off.
Can you guys be more specific on the steps that in need to do. Thanks once again.
Info:
HBoot 2.10
Radio 2.15

I feel your pain, same thing happened to me after months of successful evo hackery. Was very difficult to convey to people the extent of random roadblocks preventing all the supposed fixes. I followed every suggestion, maybe 200 separate tries at a workaround, but in the end I had to trade it in for a refurb.

To flying low,
I still have faith especially with everybody helping me out. I know theres a workaround cuz i still have hboot up and running even tho i lost recovery and rom.

Can i use unrevoked when iam in hboot? Cuz thats the only option i have.(i think)

calishooter said:
To flying low,
I still have faith especially with everybody helping me out. I know theres a workaround cuz i still have hboot up and running even tho i lost recovery and rom.
Click to expand...
Click to collapse
you need to flash the RUU in hboot or run the RUU in Windows...it doesnt matter whether it says s-on or not all it will do is restore the phone back to its shipped factory settings and unroot you

What you do:
Find and download the latest RUU. I Think this is it: http://shipped-roms.com/shipped/Sup...51.1_Radio_2.05.00.06.10_release_CL195459.exe (download should start automatically)
name it PC36IMG.zip
Place it on the root of your sd card (root of sd card = no in any folders, just put it on there).
Boot into bootloader (power off, hold volume down and turn power on to get there)
it'll ask if you wanna parse update, hit volume up for yes.
basically, this will flash the stock rom back onto your phone. Since you're s-on already, this will complete a full unroot. Then simply re-root your phone like you did the first time and you're back in the game

Ok i will try flashing the ruu from the link that you gave me.
Thanx. Will report back soon.

I tried the link but its a .exe file not a zip. So I converted it to a zip file using winrar. I renamed it PC36IMG and put it on the root of my sd. Ran it and it just got to the checking part and it stoped checking. I did it 2 times with same result.I also formated my sd card to fat32.

calishooter said:
I tried the link but its a .exe file not a zip. So I converted it to a zip file using winrar. I renamed it PC36IMG and put it on the root of my sd. Ran it and it just got to the checking part and it stoped checking. I did it 2 times with same result.I also formated my sd card to fat32.
Click to expand...
Click to collapse
If you want to run the ruu in PC36IMG form, you need the right file.
http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip < Rename to PC36IMG, then flash in the bootloader.
The ruu.exe is meant to be run from a computer, with the phone booted into the bootloader, and mounted to the pc in fastboot.

Yes i agree tech roxxorz. I was just doing what he told me. Ive tried RUU.exe before but it wont recognize my evo niether does my computer and iam in hboot usb mode. I will try your link and repot back.

calishooter said:
Yes i agree tech roxxorz. I was just doing what he told me. Ive tried RUU.exe before but it wont recognize my evo niether does my computer and iam in hboot usb mode. I will try your link and repot back.
Click to expand...
Click to collapse
Well you can't do it in hboot usb. You have to select fastboot, connect to the pc, and when it shows up as fastboot usb in blue on the phone, then you run the ruu.exe.
Though either method will work.

So when I click on fastboot on my evo, what do i click on next to run RUU.exe cuz I only have reboot or power down options.

calishooter said:
So when I click on fastboot on my evo, what do i click on next to run RUU.exe cuz I only have reboot or power down options.
Click to expand...
Click to collapse
Turn the phone off. While turning the phone off, hold vol+down till you see a white screen with androids skateboarding [bootloader] From there, after it scan, navigate to fastboot with the volume keys, press the power button to select, then connect to the PC via usb cable. When it says 'fastboot usb' in blue, run the ruu exe on the pc.

OK got it. Will report back soon.

Aye aye cappy.

I did what you wrote. The ruu.exe gave me an error 170-usb connection error. I booted into the bootloader by holding down the power button and volume down why the evo is turned off. It scaned the sd card, I selected fastboot and plugged in my usb cable. It said fastboot usb highlighted in red.