Will the accessories for the original galaxy s or it's brothers from the other carriers will fit the captivate?
LGSilva said:
Will the accessories for the original galaxy s or it's brothers from the other carriers will fit the captivate?
Click to expand...
Click to collapse
I can say that for sure the cases probably wont... Otherwise, the vibrant, captivate, and original galaxy s all have micro usb charging and a 3.5 mm headphone jack according to pdadb.net. I would double check chargers to make sure the voltage lines up and ofc never plug a U.S. phone into a European wall charger even if its micro usb. That aside they also all share bluetooth 3.0 and that website also states they have identical screen sizes.
Hope that answers your question .
However, nothing is guaranteed till lots of people own the phone and can testify on what works and what doesn't.
With the caveat that I haven't seen any of them in person, from eyeballing the various videos of the 4 US models -- and the original SGS -- it looks like certain accessories (think car mounting kits, etc.) won't be sharable between at least some of the units. The Sprint and ATT versions of the SGS are the most unusual in form factor.
From watching a Hands on Video, The SGS and the Captivate have a different form factor.
The most important accessory for me is the car mount so I have no idea how the accessories will work but I can't see them being the same.
Vibrant Yes Captivate No
From what i can tell from the many pictures I've see online. T-mobile has decided to keep the exact same form and desine as the galaxy s. So the accessories should fit. While ATT has had their galaxy s redesigned and relabled the i897. There New form factor does not look like it will fit any of the original's cases. I hope this helps........
the case probably does, and mayb some other things, but not entireley because the outer casing did change a bit...
muffled speaker
the case may fit on the captivate, although not exactly, BUT, if you look at the back there has been a realignment of the speaker on the captivate, thus your speaker would be muffled by and original galaxy s case.
cirecomputers said:
the case may fit on the captivate, although not exactly, BUT, if you look at the back there has been a realignment of the speaker on the captivate, thus your speaker would be muffled by and original galaxy s case.
Click to expand...
Click to collapse
seems like no
Related
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I like these mounts, the page just went up today. It's much better than the crap Verizon is pushing. Anyone else ever use these docks?
I can't tell from the pics but does the one that have the charger block the audio out?
Never mind, I can see the audio jack now in the pics.
i came on to post this...I just got an email from proclip confirming this. Ive used proclip in the past and they are of good quality
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
bowsersoulstar said:
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
Click to expand...
Click to collapse
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Roroco said:
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Click to expand...
Click to collapse
I'm looking at the same problem here. I've been using a holder with the 2 amp charger for the past two years with my Incredible and absolutely love it. I've never been able to get an extended battery because of how tight it slides in, though. I'll email them and ask but I might have to just swap in the stock battery for rides I know I'll need the juice.
Pros of using this are great, though. Because it's 2 amp charger I would get ~25% in about 20 minutes of driving with my Incredible with fast charging enabled in the kernel. GPS and Bluetooth for Google Maps would slow the charge down but would still give me a full charge from 20% to full in an hour. With Cyanogen I would set my bluetooth to only turn on when connected to a wall charger so I'd slide this in and my buetooth would turn on and connect to my car automatically. Last but not least, your wires are all tucked away! Very clean look.
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
nomisunrider said:
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
Click to expand...
Click to collapse
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Roroco said:
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Click to expand...
Click to collapse
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
nomisunrider said:
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
Click to expand...
Click to collapse
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
Indeed the added battery won't make it work in 512324. Our adjustable holder listed with the Galaxy Nexus listing might work. Our custom holders are made for the device as it comes out of the box, and indeed any added thickness will make it not work in our custom holders.
Click to expand...
Click to collapse
So I guess not?
Roroco said:
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
Click to expand...
Click to collapse
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Mooem7 said:
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
So I guess not?
Click to expand...
Click to collapse
Most extended batteries tend to add a lot of bulk (more than cases sometimes). The person who emailed you back may not be aware that the GN's extended battery adds about 1-2 mm of bulk to the bottom half of the phone.
Since the holder is a slide-in type, I can't see this being 'millimeter-tight'. Don't take my word for it but I'm willing to bet that this will fit even with the extended battery on.
I guess we won't know for sure until someone gets the fitted holders and try it though. I'd try, but I've a case so the fitted ones do me no good for sure.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
80 bucks for that dock. Ouch. Good concept, but that is a bit rich.
I wish you could buy these at a store. I've already got the whole set for the Nexus One and I've been waiting for the GN mount. I just added to my cart and it's an extra $20 in shipping (to Toronto). So after duty at the border I'm looking easy at $60 just for that one piece of molded plastic. Yeah the mount is great, but that's seriously expensive.
I've used their cases for the last 2 years, nexus s and thunderbolt, and they are great. I still have my Nexus S holder and the picture of the one on their site for the GNex looks like the same style, if so it should work with the extended battery. The slide in case is tight on the sides but leaves a gap behind the phone, see attached pic. The phone slides into that groove and the groove itself is very thin so it doesn't appear it will interfere with the rear battery cover at all.
Proclips is a great solution. I've used it for my car for years. I used them in 3 different cars. Pricey however, it works very well. A+
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
Hi
For those in the UK... just ordered an active mount from http://www.mountonus.com/
£59.99... bit steep but I guess thats the price you pay for a nice phone-specific/car-specific mount!
nomisunrider said:
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
Click to expand...
Click to collapse
It was to be expected. They are not going to design a niche product for a phone until it sells consistently in the millions. That said... Creating a Micro USB small swing arm to make it universal should be too hard....
If I feel industrial, I might see what I can make on my own.
Just wanted to share this dock i found on ebay. Looks way better than the samsung one as it has a simpler design. Looks like an iphone dock.
http://www.ebay.com/itm/SAMSUNG-GAL...ccessories&hash=item19cbf0b955#ht_10221wt_905
If you look at the picture closely you can see that's an international galaxy s2 in the dock our phones have different dimensions than that of the other versions of the galaxy so that dock may not fit your phone at all. A good trick for looking for the proper accessories for our phones, since there are so many versions of it, is including "t989" in any search on eBay or Amazon you do.
Sent from my SGH-T989
Well the dock is made to fit our phones, so of course it will fit the international version as well. I saw a couple of reviews on youtube and the s2 was able to mount with a case. Thats good enough space to fit the extra thickness of our phones. I ordered 2, I will give feedback once I receive them.
chicohonda91 said:
Well the dock is made to fit our phones, so of course it will fit the international version as well. I saw a couple of reviews on youtube and the s2 was able to mount with a case. Thats good enough space to fit the extra thickness of our phones. I ordered 2, I will give feedback once I receive them.
Click to expand...
Click to collapse
Please do. I'm intersted & would like one at the house
I have had this dock (actually 3 of them now) for a few months. Used it with my AT&T Samsung Infuse then with my AT&T GS2 and now with my T-Mo T989.
Fits and works perfectly with the T989 even with the Diztronics case on it. Well worth the price.
http://forum.xda-developers.com/showthread.php?t=1347285&highlight=cheap+dock
ApexZeph said:
If you look at the picture closely you can see that's an international galaxy s2 in the dock our phones have different dimensions than that of the other versions of the galaxy so that dock may not fit your phone at all. A good trick for looking for the proper accessories for our phones, since there are so many versions of it, is including "t989" in any search on eBay or Amazon you do.
Sent from my SGH-T989
Click to expand...
Click to collapse
You shot the OP down without even reading the ebay description. T989 is one of the compatible devices.
audscott said:
You shot the OP down without even reading the ebay description. T989 is one of the compatible devices.
Click to expand...
Click to collapse
thank you....
audscott said:
You shot the OP down without even reading the ebay description. T989 is one of the compatible devices.
Click to expand...
Click to collapse
Correct, and it will work with just about any brand "bar type" phone with the jack centered on the bottom. You either use or don't use the rubber insert that comes with it to adjust to size or with or without case. For $12 it's a great buy. If you want it faster there are some US sellers selling it for around $20.
This looks great !! Quick question though. Do you have an hdmi adapter for yours ? I'm looking to basically be able to charge/hdmi out by dropping it in a cradle lol
1 more question. Does the phone feel sturdy enough in it? I'd like to get 1 to modify into a car mount too
Thanks !
Sent from my SGH-T989 using xda premium
a warning to you folks. the OEM vehicle dock "DOES NOT" properly fit the Sprint Epic touch.
the 4 corners of the cradle DO NOT engage the phone at all. the phone simple "squeezes" between them. without even engaging the suction cup just sitting it on a desk I was able to disengage the phone with 2 fingers. IE the first bump you hit the phone is coming out.
the only thing holding it in is the USB Socket which is precisely what you do NOT want (force acting on that socket)
Also the usb socket will not engage the phone (it seems the sprint SII is a hair "thicker" than the infuse?) you have to PUSH UP from the backside of the dock to "lift" the dock connector just enough to allow it to engage the phones usb socket.
this screams bad news to me.
it truly is a gorgeous dock. I WANT it badly but alas I have to send it back I won't trust my very expensive phone to it.
Here is a video showing the issues. I REALLY hope they make a proper dock for this phone it needs one badly. I HAD those generic docks so much they are flat out ugly.
http://www.youtube.com/watch?v=Ct4TuPJayHQ
the seller on ebay was very cool no problem letting me send it back for a full refund. (doing that tomorrow)
I really wish I could keep it. while I would LOSE the "dock" functionality the cradle could VERY easily be modified to securely hold the phone.
but this dock is too expensive to trash its internals to do this at $29.
$10 dock I would hack it up it in a heartbeat.
any found a "proper" designed for epic touch car cradle yet? prefer a uni 4 point connector style (I have a mount right on my steering wheel)
The OEM car dock odds what you need. It works perfect. Stop wasting time with stuff made for a different phone.
Dicho por el E4GT de Latinmaxima con Tapatalk.
well it was advertised as FOR the epic touch 4g. clearly its not
gonna stalk an AT&T store tomorrow and see if I get luck for a cheap one to mod.
save up enough to buy the official epic touch one.
that's not the infuse vehicle dock that ATT was selling. i bought one direct from ATT when it was on sale for $18.00, and it is nearly identical to the genuine E4GT dock. ATT seems to have gotten smart and jacked the price up - you can't even find the infuse dock on their site, but now you can find an overpriced galaxy SII dock. the infuse is available on amazon, but it's more expensive than the genuine dock.
this is what it looks like:
http://amzn.com/B004WOBMIY
and this is the genuine dock:
http://amzn.com/B005LBEG80
so you're better off just buying the real thing.
i've been using mine for a month now, about three hours of daily driving, it's never popped out or come loose.
anastrophe said:
that's not the infuse vehicle dock that ATT was selling. i bought one direct from ATT when it was on sale for $18.00, and it is nearly identical to the genuine E4GT dock. ATT seems to have gotten smart and jacked the price up - you can't even find the infuse dock on their site, but now you can find an overpriced galaxy SII dock. the infuse is available on amazon, but it's more expensive than the genuine dock.
this is what it looks like:
http://amzn.com/B004WOBMIY
and this is the genuine dock:
http://amzn.com/B005LBEG80
so you're better off just buying the real thing.
i've been using mine for a month now, about three hours of daily driving, it's never popped out or come loose.
Click to expand...
Click to collapse
Yea, I got the same dock from at&t and it looks different from the OP's. I'm not sure if he modded it to make it longer but if that's the way it came then it definitely isn't the one that was offered for under $20 from the at&t deal.
I use mine on trips consisting of more than 30+ minutes and it has never fallen out of place. Not to mention my car has a stiffer suspension with coilovers so it's more susceptible to falling out.
well I drive a 94 Geo metro Xfi.
it don't get much more rough than that hehe
but its worth it for the 60mpg
Been using an infuse dock for about 2 months now and my phone fits fine. Yes there are gaps in the corners because the e4gt has more rounded corners than the infuse but it is secure. Btw the seller you bought it from must have swap the base because the oem comes with a fixed arm not a gooseneck. Goosenecks shake more while fixed arms don't.
Sent from my SPH-D710 using XDA App
nono the goosneck is mine that is not what came with it
I have no idea if this is the AT&T dock or not I got it from ebay as an infuse oem dock advertised as comp with epic touch 4g. its not.
just giving people heads up if they find the same thing
Clean your desk.
OP, I think you got something different than the ATT Infuse Dock.
The one I have from ATT fits the phone nicely, and while it's not perfect, I have not had the phone pop out that easily.
Glad the person on eBay is letting you return it.
I will sure find out tomorrow.
My local AT&T has one and its $17 he is holding it for me.
at $17 I am willing to hack it up a bit. I will do a side by side before sending the one I got on ebay back.
the one I got flat out does not fit. its a friction fit only (watch the video remember that goosneck is mine did not come with the dock)
ie nothing actually "holds" the phone save the usb jack which is exactly what you don't want. ONE slip one accident and your in trouble
I have no problems with my dock
Sent from my SPH-D710 using xda premium
Has there been any news of an OEM car dock? Missing the superior fit and function from my GS1 dock. I want to just be able to slide the charge plug in without a fuss. You can't plug two cables in easily when driving down the road.
Yes and it's a disappointing offer from Samsung:
http://www.mobilefun.co.uk/genuine-samsung-galaxy-s3-vehicle-dock-ecs-k200begstd-p35105.htm
Honestly I've been rocking the Infuse 4g car dock and love it, not to mention you can't beat the price!
Does the aux/audio out work in the Infuse 4G dock??
eheaps said:
Does the aux/audio out work in the Infuse 4G dock??
Click to expand...
Click to collapse
Perfectly (at least for me).
will the infuse dock still work with a case? I have a somewhat slim simple clear case that protects the back/sides
Brett8187 said:
will the infuse dock still work with a case? I have a somewhat slim simple clear case that protects the back/sides
Click to expand...
Click to collapse
It's a pretty snug fit WITHOUT a case, so I'm going to go with my gut and say no.
Jubmasterflex said:
Yes and it's a disappointing offer from Samsung:
http://www.mobilefun.co.uk/genuine-samsung-galaxy-s3-vehicle-dock-ecs-k200begstd-p35105.htm
Honestly I've been rocking the Infuse 4g car dock and love it, not to mention you can't beat the price!
Click to expand...
Click to collapse
I'm gonna have to say like the comments for that link that this is just some generic dock. I don't know why they have not announced a car dock yet. IMHO that's one of the more popular accessories.
jdubau55 said:
I'm gonna have to say like the comments for that link that this is just some generic dock. I don't know why they have not announced a car dock yet. IMHO that's one of the more popular accessories.
Click to expand...
Click to collapse
Actually someone mentioned in another cardock thread that they spoke to a Samsung rep who confirmed that's the only OEM cardock they plan on releasing for the Galaxy S3.
When it comes to accessories, Samsung is far from the leader.
jdubau55 said:
I'm gonna have to say like the comments for that link that this is just some generic dock. I don't know why they have not announced a car dock yet. IMHO that's one of the more popular accessories.
Click to expand...
Click to collapse
It's not, when you look at the video from that site it is a Samsung dock but a universal Sammy dock for 4 inches to 5.3 inches. Lame.
Yeah, you're better off getting a cheap Infuse dock - it holds the phone very securely, and the charging port / audio-out connections work very well. You'll need to take your phone out of its case, but if you have a Diztronic or other TPU-type case, that's not so difficult.
Well...crap. Every other Galaxy S has had dedicated car docks. They finally release a Galaxy S that is the same form factor worldwide and then don't release a car dock. Yet, they will release like 4 different ones for the S2. Stupid.
Curious if anyone has one or knows of a manufacturer that is selling them. I would like to start running and biking with a bit more comfort as I find the screen to large to keep in my pocket when doing these activities.
Thanks!
You might look into the Tune Belt AB85. There's a video on YouTube where the guys shows how it holds a Galaxy Note so surely the S3 would fit. The AB86 is designed for the Galaxy Nexus so you might look into that too. I own a Tune Belt that works with my Galaxy S2 and I found it to be a good product.
fooldog01 said:
You might look into the Tune Belt AB85. There's a video on YouTube where the guys shows how it holds a Galaxy Note so surely the S3 would fit. The AB86 is designed for the Galaxy Nexus so you might look into that too. I own a Tune Belt that works with my Galaxy S2 and I found it to be a good product.
Click to expand...
Click to collapse
Funny you mentioned Tunebelt, I just received a message from one of their customer reps that the Galaxy Nexus model should fit the S3 perfectly.
Can be purchased directly or through Amazon: http://www.amazon.com/Tune-Belt-Arm...2572943&sr=8-1&keywords=Tunebelt+galaxy+nexus
Similarly I managed to make my Droid X Tunebelt accommodate the S3 (after some minor alterations )
http://forum.xda-developers.com/showpost.php?p=28618450&postcount=21
Also note there's a thread already dedicated to this discussion:
http://forum.xda-developers.com/showthread.php?t=1736407&highlight=armband
Jubmasterflex said:
Funny you mentioned Tunebelt, I just received a message from one of their customer reps that the Galaxy Nexus model should fit the S3 perfectly.
Can be purchased directly or through Amazon: http://www.amazon.com/Tune-Belt-Arm...2572943&sr=8-1&keywords=Tunebelt+galaxy+nexus
Similarly I managed to make my Droid X Tunebelt accommodate the S3 (after some minor alterations )
http://forum.xda-developers.com/showpost.php?p=28618450&postcount=21
Also note there's a thread already dedicated to this discussion:
http://forum.xda-developers.com/showthread.php?t=1736407&highlight=armband
Click to expand...
Click to collapse
Has anyone tried the AB86 model? I have a smaller TuneBelt that I used with my HTC Desire, and there is no way that you can get headphones in with the S3 going in to the holder top-first (as I'd want to use it), as the neoprene covers exactly where the headphones are. There are only gaps in the corners and middle. It would work going in bottom-first, as then the headphone access would be at the open end.
Does the AB86 model improve this to allow headphone access from either end with the S3?
I've been happy with the build quality of the TuneBelt. Another cheaper but similar looking alternative that I've seen is from iGadgitz http://www.igadgitz.com/products/fi...for-samsung-galaxy-s3-iii-i.html#.UEi0oo1lQs4
That's specifically for the S3, so should definitely have the correct headphone access, as well as labelling where buttons are. Has anybody got any feedback on this?
I wasn't too happy with how the TuneBelt fit, so I returned it and picked up a Belkin EaseFit Plus. It's a much better fit for both my arm and the phone. My only complaint is that, despite it's claims, it is most decidedly not sweat-proof. Maybe it is from the front, but not so at all from the back. The TuneBelt seemed to do a somewhat better job at keeping the phone dry from sweat, probably because the fabric is heavier/thicker.