Related
Hello,
I recently recieved a Dash from T-Mobile with WM6 Standard. 1 annoying thing I've noticed is that although the phone's keypad is locked, while reaching for the phone in the pouch, I've accidentally answered calls that I didn't want to . I wish there was a way that required a combination of at least 2 keys be pressed in a certain order before the call would be answered. This would be similar to unlocking the keypad. I could also prevent unknowingly answering a call if the ringer was on silent.
Wow, many views, no solution??
Im not sure about your phone, but you might want to disable any key answer
For my phone ( tornado ), its under settings, phone, call options
Hello karhoe,
Thanks for the suggestion, however that option is already disabled. The problem is that when the phone is in the case or in my pocket, the Answer Key can easily be activiated by the slightest touch which is not good. I'm suprised that more people haven't responded with the same issue.
Yes it happened to me a couple of days ago, quite annoying. The phone was just in my pocket and it rang. Reached in to pull the phone out, and apparently I had inadvertantly touched the softkey that answers the phone, before I could check the caller ID
Well there is no app that I know of that makes you have to press 2 or more keys to answer the phone. And that is what you would need, a 3rd party app.
It would be kind of dangerous or even more annoying under certain circumstances like driving. But if you had 2 different lock options, one normal the other for the 2 button answer, that would be cool. Very cool indeed.
But it does'nt always happen, I think it's happened only twice. Usually the phone is not in my pocket or on me in a holster, because I want to keep the radiation away from my body, so it's usually on my desk or sitting in the car if I am driving. In-between those times it is on me.
I'm afraid this applies to any phone of the Candy Bar type. Happened to me quite often to answer a call while reaching for the phone (S620 and S710 ans some other Nokias). Flip phones are much better for that. You got to open the phone to answer a call and you can still check the caller on the outside display before opening it.
You're right, a third party app setting a two level answer mode would be great, although don't know if this can be done, where the core of the phone handles the answering alone preventing any developer to set up an "answering sequence". Good idea anyway, curious to check on this one.
Ka.
Thanks for the replies. I'm still optimiistic that SOMEone out there may have a solution!
Sorry can't resist - If its someone you don't want to talk to, pretend you're on ATT and drop the call
I haven't had a problem. I use this case
http://www.krusell.se/product.php?productID=576&category=5
@jamssx: lol
@timothyjok: thx for the suggestion, I've looked at that case before, but was trying to remain positive that someon may have software solution. sigh...
From http://www.shipiboconibo.com/dash/#callreject :
Disable Accidental Call Rejection
Have you ever recieved a call and as you pull your Dash out of your pocket it says 'Call rejected'? I have, and it annoys the hell out of me! I derived this hack from a hack telling how to enable this feature, but mine was enabled by default so I am going to assume the original hack was intended for the Excalibur and T-Mobile decided to enable the feature on their phones. By default (can anyone else verify this is default on the Dash?) simply touching the JOGGR strip on the Dash during an incomming call will reject the call. I hate this and here is how you can disable it!
\HKEY_CURRENT_USER\ControlPanel\JogBar\Settings\EnableRejectCallFunc = 0
As you probably guessed, this is a binary value, setting it to 0 disables it, 1 enables it.
Hey all,
Im a long time user of the forums but havent posted anything yet. Anyway, ive been seeing this issue on some other forums and after massive searching cant find a fix.
I just got the official upgrade to WM6.1 on my sprint HTC Touch. PRIOR to 6.1 the "main" today screen showed a missed calls link (icon is a phone with a "!"), which by default listed an entire call history - missed calls, received calls, and outgoing calls. AFTER upgrading to 6.1 the same button now only lists missed calls. there is a menu button which contains a filter, and the ability to switch to "all calls". the only problem is, this filter doesnt stick. after closing it and reopening it reverts back to only showing missed calls. This is a huge pain in my arse as I used that button almost every time i use my phone. (redials, sending texts, getting numbers, etc)
As far as my options on alternatives goes, this is what I know:
1. I know you can open the "phone" dial screen and access a full call history. (this is ok, but I really want a quick one touch access!)
2. I found the callhistory.exe floating around on here, got it set up in my programs and mapped it to the camera softkey. (also a pain because I had all my soft keys mapped to other things, and i tend to hold my phone in my right hand making it annoying to hit)
I would really LOVE to know if there is a way to get that "missed calls" key on the today screen to show the entire call history like it used to do!!!!! (or at least add/change another button on the main today screen to access call history)
I may just be screwed, but if anyone can figure it out I know xda-devs can. Any help would be appreciated.
p.s. If other people are seeing this thread and are in the same spot, and want to know how to set up callhistory.exe to map to a softkey let me know, and ill post those details on that temporary alternative.
Call history bug
navogel said:
Hey all,
Im a long time user of the forums but havent posted anything yet. Anyway, ive been seeing this issue on some other forums and after massive searching cant find a fix.
I just got the official upgrade to WM6.1 on my sprint HTC Touch. PRIOR to 6.1 the "main" today screen showed a missed calls link (icon is a phone with a "!"), which by default listed an entire call history - missed calls, received calls, and outgoing calls. AFTER upgrading to 6.1 the same button now only lists missed calls. there is a menu button which contains a filter, and the ability to switch to "all calls". the only problem is, this filter doesnt stick. after closing it and reopening it reverts back to only showing missed calls. This is a huge pain in my arse as I used that button almost every time i use my phone. (redials, sending texts, getting numbers, etc)
As far as my options on alternatives goes, this is what I know:
1. I know you can open the "phone" dial screen and access a full call history. (this is ok, but I really want a quick one touch access!)
2. I found the callhistory.exe floating around on here, got it set up in my programs and mapped it to the camera softkey. (also a pain because I had all my soft keys mapped to other things, and i tend to hold my phone in my right hand making it annoying to hit)
I would really LOVE to know if there is a way to get that "missed calls" key on the today screen to show the entire call history like it used to do!!!!! (or at least add/change another button on the main today screen to access call history)
I may just be screwed, but if anyone can figure it out I know xda-devs can. Any help would be appreciated.
p.s. If other people are seeing this thread and are in the same spot, and want to know how to set up callhistory.exe to map to a softkey let me know, and ill post those details on that temporary alternative.
Click to expand...
Click to collapse
I have the same problem on my Xperia. Does anyone have a solution?
Why dont you try this little app,dont remember where i got it from but very handy.It creates a short cut for your call history in the Programs section.Hope this helps.
has anyone come up with solution for this annoying bug that filter selection in Call History from Today screen does not stick and defaults to Missed Calls only?
I was reading the user reviews of the Fuze on another website when I noticed one saying that the Fuze requires you to press the power button to reactivate the screen each time you need to press a phone number button on the screen while you are on the phone. Is this a requirement on the TP2? As someone who has to deal with phone trees and other automated phone systems alot for business calls I was thinking that I should ask about this as it would be extremely inconvenient.
The proximity sensor will automatically turn on the screen if you move your face away from the device during a call. There's a big button to bring up the keypad to use. If the keypad is deployed and you put the device back to your face, the screen will turn off. But if you turn the screen back on, the keypad will still be deployed, so that's pretty useful.
Thank you very much for this information, it in nice to hear that this problem was resolved on the TP2. I was also wondering if it is possible to run the speakerphone with the TP2 in face up so one could type on the dialpad on the screen while hearing the responses from the phone call? I'm guessing this is possible as my old 8525 does it fine but I just thought I should confirm it. Thanks in advance.
During a call, you can also take out your stylus, it will start notes.. makes it available to write on the screen during a phonecall.
coscom said:
I was also wondering if it is possible to run the speakerphone with the TP2 in face up so one could type on the dialpad on the screen while hearing the responses from the phone call? I'm guessing this is possible as my old 8525 does it fine but I just thought I should confirm it. Thanks in advance.
Click to expand...
Click to collapse
Yes, there's a large button during a call for you to tap to switch to speakerphone as an alternative to putting the device face down on a table. Dialpad works the same in speakerphone mode as in normal mode.
More than half the time I take my phone out of it's case in my pocket to check texts or call somebody, it's always on and eating battery. Alot of the time I have the phone in vibrate or silent because I can't have it going off most of the day, and whenever I get any kind of notification the screen comes on (text, alarm, call, ect.), and then the screen ends up staying on because it's constantly being bumped and never has the time to shut itself down.
Is there any way I can make the screen stay off at ALL times (except on an incoming call), and ONLY come on when I press the unlock/power button on the top of the phone?
I have a TMobile TP2 and I'm running the Nov. 19th, Photon Energy ROM. Upgrading to the Nov. 27th version when it's done downloading but I don't think that will fix the problem as I've changed ROMs before. Thanks to any help.
you will find that when in the case it should be off, on taking the phone out of the case (i assume the HTC one that came with the phone?)
the magnet in the case triggers the keyboard sensor which turns the screen on.
otherwise, you can change the display time out in power options under settings.
Cheers
Steve
That's interesting, I've heard about the case doing that but never thought about it. Would you recommend any cheap cases, or is there a specific magnet location I should be careful of? And do you know if there is a way to keep the screen off when I get a text message for example?
There is a way to fix this... it is to disable "Wake on Slide." I have done this and no more problems.
Here is a link to what to do:
http://forum.xda-developers.com/showpost.php?p=2945249&postcount=3
Hope it helps you, as it did me.
Thanks for the reply and I appreciate the help, but I don't really have a problem with the wake on keyboard slide, it seems that if the phone is in my pocket locked, and I get a text message, the screen comes on to notify me that I have a text message. Then, it's usually being bumped around in my pocket and since the touch screen is usable with any object, it will stay on because something will tap it in my pocket. The phone then heats up over time and drains battery. I want to find a way to keep the screen off at all times unless, I either receive a call, or push the power button. Thanks.
illusion of progress said:
Thanks for the reply and I appreciate the help, but I don't really have a problem with the wake on keyboard slide, it seems that if the phone is in my pocket locked, and I get a text message, the screen comes on to notify me that I have a text message. Then, it's usually being bumped around in my pocket and since the touch screen is usable with any object, it will stay on because something will tap it in my pocket. The phone then heats up over time and drains battery. I want to find a way to keep the screen off at all times unless, I either receive a call, or push the power button. Thanks.
Click to expand...
Click to collapse
Try:
go to HKLM\Drivers\BuiltIn\RIL
change DisableSMSWakeUpEvent to 1 (0 will wake up the device)
On my Rhodium, it does not wake up by default. I hear the notification, but my screen remains dark
Or try this cab file ... soft reset after install
Thanks for the .cab, I'm restarting now to see if it fixes the problem. Kind of random, but I might as well ask here before starting a new thread. I started using Mobile Shell instead of TF3D and so far I love it, but when setting a wallpaper, the wallpapers that I would normally use in TF3D, (480x800), it makes me select or crop out part of the photo to use as a background in Mobile Shell. I can't tell if it actually gets blurry (I would think so, because it's stretching the picture), but does anyone know why it wants me to only use a certain portion of the background instead of just setting the entire picture? Thanks,
More than likely, the version of Mobile Shell you have is either not designed for WVGA or there is a setting somewhere in there that allows you to change it and you haven't found it yet.
Am not a expert on mobile Shell, but according to their website, the latest version (3.5) does support WVGA.
Another option is to, if you have Adobe Photo shop or something similar, scale down the entire picture to the size it reccomends.
Otherwise, if you have a version earlier then 3.5, maybe you could upgrade and see if it makes any difference.
Hi all,
I was wondering, is there a way or app to change the way to answer the touch pro 2 /tilt 2? I know everyone loves slide to answer, however i like my answer or reject soft button. Anyone know of a tool to have buttons instead of the slider?
Thanks.
You could try S2U2. If you activate the caller id under the S2U2 settings and turn the slide to answer off, you will get the answer and reject buttons. The screen won't be the same, but it will give you the buttons instead of the slider.
I hate the slide to answer on the phone because every once in a while when I take my phone out, the screen flips causing what would normally slide to answer to be a slide to reject.
I have missed MANY calls because of that crap. I hate it.
Master Thief-117 said:
I hate the slide to answer on the phone because every once in a while when I take my phone out, the screen flips causing what would normally slide to answer to be a slide to reject.
I have missed MANY calls because of that crap. I hate it.
Click to expand...
Click to collapse
The phone application is not normally configured to change orientation according to the G-Sensor. Its possible that the phone application was somehow added to the G-Sensor whitelist due to a mod you made. You can remove it from the G-Sensor whitelist (use this forum's search function), which I recommend, since having the phone app on the whitelist causes all sorts of issues.
The other possibility is that you are using a case that has a magnetic clasp, which is causing the phone to think the hardware keyboard is open (this is triggered by a magnetic sensor). There is a registry edit to prevent this.