HI
I am new to xda devolpers but also know what i am doing now my main aim is to put windows 6.5 mobile on to my htc touch diamond and yes i know how to do however after flashing the HARD SPL to 1.30 olinex i have to upgrade the radio rom now when i run the custom ruu that comes with the rom the phone goes to the tri couler screen then to the percentage bar but stays at 0% then the error message of 262 comes up with the recovery i have tried things such as run as admin,turn off firewall but i cant seem to turn off avg free i have active sync on the phone but not on the pc but i cant get active sync because i am running windows 7 i have tried diffrent raidos i even tried skipping the radio rom and putting the os 6.5 straight on there but i had the same problem.
so plzz help i really want windows mobile 6.5 what am i doind wrong.
feel free to ask me questions about software and all that stuff about the phone
thnx.
FIXED
This problem is now fixed by using 1.40 olinex flash hard spl
thnx
Related
Hi all,
Plz bear with my ignorance when it comes to upgrading ROMS etc.
Basically yesterday I upgraded to O2's official WM6 ROM .... and find it "not so good". It is slow to respond etc( i found it slower than my WM5 )
So now I wanna move to BB4, question is how do i do it??
I have downloaded an Artemis_USPL from Prof. So what are the steps I need to do??
Is it ...
1) Run start_uspl.exe from the zip file and let it complete.
2) Run( double click ) the img-46785-Tom_B_B_v4_0_TouchFlo_Professional.exe
Is that all I need to do?
Also, if I brick it .... what do i need to do to revert to an original ( say o2 WM6 ROM) ... is it USPL it again then run the O2 rom??
Many thanks
Fahd
yep, thats what you need to do. both 1) and 2) will need some user input and after it's done the device resets itself. so after 1) wait until restart is complete, then do 2).
for your original roms you dont need uspl. but if you are not completely sure, run it anyway.
Thanks for that. Time to give it a whirl! Wish me luck!!
Hmmm doesnt wanna play ball.
Did the above and ran uspl .... got stuck on a white screen. So I rebooted the Orbit and tried running the BB4 .exe ... got to 3 % and told to that .......
Error 270: Update Error. The image file is corrupted. Please check your update ultilty.
Can anyone help?? It will not upgrade ROM.
I keep getting the white screen and it cant run ROM utility(Error 224: Device not responding ).
I then reset the device and run BB4 ... I get to 3% and then I get error:270 ( image file is corrupt ). I have downloaded the ROM again and still get this error.
Any helpers out there??
Thanx
Fahd
I had the ame problem mate. What you need to do is revert back to the original 02 WM5 Rom which can be found on this forum somewhere. Then once installed, run uspl & then the BB4 Rom & hey presto your sorted.
For some reason i couldnt get uspl to work on WM6 02 rom either
Hi fadhp,
Ensure that your windows firewall is disabled and also you shut down any anti-virus programs running on your PC
I also found that turning off all the plugins on the today screen helped me to upgrade my O2 orbit.
I went through the same issues as you with corrupted images at 2% , however following the steps above helped me.
The firewall was disabled and so was AV ... so not sure about next steps.
I thibnk I shall try downgradind to original O2 WM5 rom and then upgrade ....
question is where in this forum is that Rom!! I had seen it before but as usual when u dnt need something you find it and when you need it u cant!
Will keep on searching .... anyone know the link plz save me some time!
Thanx
F
question is where in this forum is that Rom!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=314866&page=2&highlight=orbito2uk-wm5
The link for the original O2 WM5 is in post #13, the 3rd one down.
Thanks for that.
Downgraded to WM5 now .... and tried to run BB4 .... still no joy. Same error.
Maybe i'll try another ROM just to see if that works and if it doesnt then MUST be my PC or something.
Here goes!
Cheers guys will kepp u posted.
F
Tried another machine ..... XP SP2 not FW or AV still failed.
Always get to 3% then crash.
HELP!!
Tried BB3.7 still no luck. 3% and crashes .... on 2 diff PC's.
I noticed that USPL runs ver 3.0.3.0 of the update utility but the actual ROMS when you launch them are running 3.6.3.6 ... does this make a difference?
Help guys plz!
Those are the issue no's of the rom upgrade utilities - it does not matter. It appears you are still not cid unlocked. whats your spl no? take it from first bootscreen.
SPL is 1.25.0000
IPL is 1.25.0001
Ideas??
The spl from uspl is 1.110000 so you need to run uspl again. Even if the screen goes blank wait till it says your rom has been upgraded.
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Some people had to run uspl 3 times in a row for it to work. Did you wait a while on white screen before giving up? I guess you are on 02 wm5 at the moment if not flash to that and try again. If you are do a hard reset and try again - few times in a row.
OK looks like USPL doesnt work for me!
Everytime I ran it under WM5 i still had 1.25.0000 and then i upgraded ROM to O2 WM6 and now everytime I run USPL it stays at 3.04.0000.
It doesnt do anything after the white screen ..... just sits there like a duck!
With so many ppl having succesfully done this surely someone can be a Wizard of Orbit??
fahdp said:
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Click to expand...
Click to collapse
Had same problem. Dont reset the phone but just if you see only the black screen, run the USPL update.
I have an orbit and uspl flashed first time from wm5 and wm6 - is yours usa orbit? If you really cant run uspl then it will need cid unlock from imei check - it costs but you have permenant cid unlock so you need not worry again.
Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me
Hi,
I am using Vista and Windows Mobile Device. I have recently flashed to latest win mobile 6 from Dopod. However, now when i tried to hardSPL my 838pro, everything went smoothly, in the hardspl it is able to detect the spl version of my 838pro and everything. but after I select the update that I want to make to 838pro, it restarts, and then it will have a screen:
"verifying information from phone" something like this and my 838pro will show the 3 color screen.. right after that, my phone will just be in that state, showing "USB" on its screen.
Anyone can advise?
disconnect your phone from the pc, then put it into bootloader mode (if you don't know how - look in the wiki), once you have it at the tricolor screen, then connect it and launch the rom update utility.... should work, if not, have you updated the Vista WMDC.... Works for me everytime...
Deb.
It don't work.. in tri color screen, after i plug in, it cannot even detect my SPL version at all (which is spl 2.03). It just says "USB".
I followed all the instructions for the Win Vista tweak but when I tried to use the new driver files, the vista reported "the files are not for 32bit system" even though I have downloaded the 32bit one.
Can anyone help? If not I have to flash straight away with the ROM
i dont get it.......are you trying to flash hardspl now or just a rom?
i mean i want to hardspl my phone before install but it can't.
But i can install the rom straight away!
did you take a look at mrvanx's guides?
Yes i followed exactly and the above is the problem i geT
sorry, but i'm trying to understand where is it exactly you are stuck.....could you be a little more specific
jacksony said:
in the hardspl it is able to detect the spl version of my 838pro and everything.
Click to expand...
Click to collapse
someone correct me if i'm wrong, but when you hardspl you are supposed to use sspl, there's no detecting of spl version
i mean in the hardspl program it is able to detect the spl version of my 838pro and everything. but once i press continue, my phone restart and it into trio-color screen and won't do anything already.
Im trying to flash my rom but i cannot establish a proper conexion between my diamond and the pc.
When i reset i goes to the windows mobile green screen and thats it, since it cant continue it nevers syncs properly with my computer.
I have tried to instal several hard-Spl but it gives me 0% error and 262.
I think is a conncection promblem, any other way so the Diamond could be properly detected?
i had same problem on cruise once,hard reset was the only solution 4me..
thanks.. did end up finally doing hard reset and since I had to install new rom I took the opportunity to install a better one (natxoCC Buffet 2), in spanish. I recomend it. fast and stable.
http://www.htcmania.com/showthread.php?t=14410
hi everyone
hope u keeping well,
i bought htc diamond and i tried every thread here in the forum just to do hard spl for my device and its not working keep 0% till in the end i get error connection i went to htc website and downloaded rom from them the original and re-flash it on my device and it worked fine ... but when i try to use hard-spl so i can install any other rom like energy or any one its not working keep on the 0% .... my device DIAM100 and the spl on it 2.0.3 or some thing like that and i rly rly want to install custom rom pls help
any one pls ?
Problem Solved
A.J said:
hi everyone
hope u keeping well,
i bought htc diamond and i tried every thread here in the forum just to do hard spl for my device and its not working keep 0% till in the end i get error connection i went to htc website and downloaded rom from them the original and re-flash it on my device and it worked fine ... but when i try to use hard-spl so i can install any other rom like energy or any one its not working keep on the 0% .... my device DIAM100 and the spl on it 2.0.3 or some thing like that and i rly rly want to install custom rom pls help
Click to expand...
Click to collapse
download this, and run first the diamond-sspl.bat
if it runs successfully and ur screen turns black...then run DiamondCustomRUU.exe again to flash Hard SPL 1.24
in the folder u have diamond-sspl.bat and hard spl 1.23 and 1.24, run the hard spl 1.24 for HTC Diamond, then flash a cooked rom.
PM me is your problem solved
Good Luck
Hello, i had the same problem and i tried this solution with success, many thanks!
the problem now guys my dimoand not even connecting with the active-scyn through usb ... it connect as flash memory but refuse to connect through cable
You may have selected default as Disk Drive and ticked "Dont ask me again'
then you need to go to settings > connections > USB to PC and tick
"Ask about connection type when I connect"
Ive had the same problem ( connection 260) And tried the above, but i still get the error?
Tried that myself, and I'm stuck on the coloured screen with an error: Upgrade ROM code error please try again. DIAM500- SPL-0.62.0000 - MicroP-Diam (LED) vB. Doesn't leave this screen until I try to flash with nbh, and it gives communication error no matter whatI try. Bricked?