Related
Ok, we have some smart people here at XDA-Developers so why has no one been able to come up with a hack for the low volume on many of these units? The SX-56 has really good volume in both the earpiece and the speakerphone but it seems all other HTC units do not!
When using the media player the volume on the speaker is adequate (not great); however the same speaker as a speakerphone can barely be heard unless one is in a quiet room. The earpiece volume is terrible in a noisy environment. If you compare this to almost any tiny phone it sucks to put it bluntly. Take my LG 4500, it is so loud that you have to turn it down (this is as it should be).
From what I have seen, changes in the ROM can effect the volume so this tells me that there has to be some value stored away in a .dll that limits the max volume. I have searched for a registry value but none seems to solve the problem. The same hardware used for Media player has to be used for everything else, i.e. amplifier and speaker for spearkerphone and just switched to earpiece when in normal phone mode. Thus the amplifier is capable.
Can someone identify the .dll used for audio? Is it different for the various models? Does one work better than another? Is there a hacked version that would work better than all of the others? Is it in the volume control .dll?
Anyone that can solve this problem will be a hero in my eyes and a true hacker in the best sense of the word. I have the new HP IPAQ HW6510 (also made by HTC) and it has some improvements in the version of Windows it has, such as the Bluetooth stack really seems to work well; however, since the unit supports Bluetooth 1.2 I'm not sure whether it would work with version 1.1 phones.
Thank you for any help you can provide. I searched the site first and found many other complaining but no solutions.
Doesn't anyone have a clue? Is there anyone that can explain the workings and which .dlls do what relative to audio? Surely there is some bright person that has been able to figure this out.
pda2k user here. NEVER had volume problems. lucky?
Hi I'm new to the site, i had read a lot post about upgrading roms from different companys, i read people describe how good the a2dp quilty is, but the problems comes, i first upgraded the rom to T-Mobile , then i found there are a high pitch nosie, at first, i though it was just my earphone, after i changed it, it still the same, then i upgrade to the QTEK rom, the nosie still comes, the nosie comes as the singer start to sing!!! it makes my so dizzy, i had try to link my BT to my PC, but they sound much different! no nosie plus clearer sound!
the second problem is that when a phone call-in, the ringtone goes via BT rather than built-in speaker???
the third problem is if you set ur BT as both hands free/set and wireless stero, during a connected phone call, if you press any button on the dial pad, all the sound will gone, but the phone is still connected, i found this problem when i using my voice mail?!
also after i update to the non-O2 rom, my phone is no longer accept any MMS, i already config all the setting from O2, is just that i don't have my MMS acount appear on my mail box. i also try the .cab setting file too!
My A2DP BT is i-Tech S35
ROM Version: 1.30.77WWE (QTEK)
Radio Version: 1.09.00 (QTEK)
ExtROM Version: 1.13.188 WWE (O2)
Many Thanks!!!
Was it just me than having this problem???
- I've not the first problem.
- I've the second problem
- I never experienced third problem
:wink:
http://forum.xda-developers.com/viewtopic.php?t=46540
Click on the above link , download the file and run it on your phone, do not alter any of the options, just click next on everything it will fix your MMS problem
thx a ur advice coff... but it still doesn't work, plus i starting to think that the nosie might cause by my s35, due to the campasility.. (sorry can't spell)
Hi MicmiC901,
Yes, it probably is something "locally" with your phone/headset/area/etc, since I also have same experience as asci, meaning;
1. NO, don't have that problem
2. YES, I have same issue (to me this is actually OK, since when headset is connected, I WANT it to only ring in the headset)
3. NO, never experienced this problem
I use the latest Qtek ROM with AKU2 and A2DP, but have never experienced that high-frequent-noise-issue you mention with any other of the A2DP ROMs on my JasJar (TMobile Germany ROM, a custom-ROM from the forums).
so RonnyGydar, which bt headset u using @ the moment? i just try with my friends logitech bt headphone, it get worse than my i.tech, sound get Stuttering , so i think i better change a new bt, would u recommand moto ht-820?
Hi MicmiC901,
Sorry the veeery slow response...but now I have even one more BT Stereo headset...so then you get the "bonus" of even more info in my reply!
I have 3 BT Stereo Headsets, and here is a short summary of experience of them all.
HP BT Stereo Headphones (same HW as the Logitech ones as I understand).
Sound is good, clear, OK bass. Nothing exceptional, but I was very pleased with them. Sound could be a bit higher at the highest volume...if you plan to use then in noisy environments...but not really an issue...since they are quite loud.
Motorola HS820
Soundwise (clarity and bass) very simmilar to the HP ones...can't point my finger on any differences. But they seem actually a little less loud than the HP ones...so with these I struggeled to hear Podcasts when I sat on a bus going through tunnels. The HP headphones are slightly louder, I think.
Bonus of these are the excellent batterylife and miniUSB plug...plus the HP ones do not have a microphone, so the HP ones are only for music. So I would easily chose the Motorola's before the HP headphones.
One minus for me with the Motorola's are that they hurt my ears after a couple of hours of use. ...that at lack of "powerfull" bass, got me to look at the i-Tech BluePRO's...
i-Tech BluePRO
These have very good bass (and they sure look like they should have it too...pretty big earmufflers...with these, you look like you are working at a construction site or something, but the clarity of the sound is actually worse than HP and Motorola...they sound a bit fuzzy.
...but I still use these all the time...mainly for two reasons. One is the excellent bass (I like to listen to techno and trance...and then bass is important, the other is that they isolate outside sounds (due to the enormous padding), so I can have the sound as low as I prefer...and STILL hear all my music without disturbance from other sounds in the environment (like sitting on the bus in a tunnel, or at a noise Gym).
It also seems that there is quite a bit difference in how the different manufacturers implement BT profiles.
My Motorola and i-Tech BluePRO have problems with "Pause/Resume"-button on headset when used with my JasJar (Pause works, but not resume...or opposite...not sure which it was, dont have the headsets with me today)...but the HP ones does not (I tested them a couple of times, and the HP headphones worked all the time)!?
Re-connection after a time without use seems also to vary a bit. The Motorola I can turn off/on the headset, and they reconnect automatically to my JasJar. The i-Tech BluePRO's I must choose re-connect in "Bluetooth settings" on my JasJar every time I want to use them.
The "famous" "lag-issue" everybody experiences I experience with all my headphones in some situations...and it does not seem any better or worse among the headsets. It seems to also be affected by general radio disturbance, since I have a lot of problems with lag at work, but no problems at all at the Gym (which is good for me...since that is the place I am most happy with having my wireless headphones), and some issues at home.
Hope this was of any help!
actually i have the problem micmic is talking about.. it happened when i upgraded my wiz to a newer rom to get the a2dp function. eventually i do not have a bt.stereo -headset yet.. (coming in about 2 weeks) but i have the issues with the sound. it's almost like a bad bitrate or something? ..wierd it is since i remains even if i downgrade my rom. =/
Hi epluribus and MicmiC901,
Is the "stuttering" you both mentioning the same as I call "occational lag"?
IF it is...it you should certainly not have it when you do the following test;
1. Reset your JasJar/Universal (to clean memmory completely)
2. Started listening to music over headset with...
3. The Universal lying on the desk in front of you completely still 50cm from your face
4. You sitting completely still
5. No WiFi on close to you.
...this test is completely overkill...but if it STILL stutters in that "controlled scenario"...well then it must be something different with your Universal or headset HW. Cause I can walk around with my JasJar (also in areas I know there are 5-6 WiFi connections active...like my appartment), and even put the JasJar on the table and walk 5-10 meters away from it...and have no or at least nothing more than an "occational stutter"/"lag".
It seems to be two major factors affecting this "stuttering"/"lag" (from my experiences at least...I have used A2DP a lot with my Universal...couple of hours every day);
1. Universal struggling outputting(RAM/CPU...or both!?)
One help here is to apply the registry "A2DP priority" fix (found it in the forums here).
Another is to close all programs before using it (I usually do not do this...I usually only do it in hindsight when I get the problem).
2. Signal between Universal and headset struggling (obstructions between Universal and headset, WiFi nearby, so forth)
I for example get this problem if I put my Universal in my trouser pocket (I know, I must have big pockets, and walk around, I get stuttering/lag occationally. If I then take it out, and hold it in my hand farily still when I walk...no stuttering. I have found, that when I walk, it is OK to have it in my backpack/rugsack...then for some reason it very rearly stutters...so I usually do that.
But when I walk of the bus at work, and walk into the "campus" of my workplace, which is cramped with radiotransmitters (is norways largest Telecom company)...I get a lot of stuttering, and need to take it out of backpack, and hold it in my hand, at it gets a lot better.
In short: A2DP with the Universal works, but is sensitive to disturbance/obstructions/moving around...and to make it worse, it is also sometimes dependant of the Universal itself struggling with CPU/RAM.
I have BTW had the exact same problems before with Qtek2020 and Qtek9090 (which I got hold of some "A2DP patches", when I had those devices). ...but I really had a LOT more stuttering with those two...so much so, that I never used A2DP with them on a daily basis.
...so it can seem that HTC is getting slightly better on each new device...?
Hope this info can be of some use!
...but it might not...if my assumption at the beginning here is wrong, and your "stuttering"-issue is something completely different than the "lag"-issue I talk about!?
iam currently using latest rom from dopod and motorola 820, although the two earpiece have sounds it is only mono, can someone help to make it stereo? o recomend what rom to use, thanks
In order to have stereo audio on a Bluetooth device, you need a profile called A2DP, which is currently only supported by the latest Qtek Universal ROM at the moment:
ftp://xda:[email protected]_Updates/UNI_QTEK_13077_176_10900_WWE.exe
Dopod has not released a ROM supporting A2DP yet.
thanks for the help, God bless
No problem. Do let us know whether it works well or not.
it works, i have stereo sound, but need improvements, in a song the bluetoth stops 3 to 4 times when playing, the player dont stop its the motorola 820 that stops several times.
I did come across a post with a patch for the A2DP flaw the other day. It's somewhere on this site - do a search and see if you're lucky.
Found it: http://forum.xda-developers.com/viewtopic.php?t=46811&highlight=universal+a2dp
It worked for me for a little while so try it.
Hi,
I have used A2DP a lot with my JasJar the last 4-5 months, and had written a summary of my experiences with this "lag/stuttering"-issue in another thread here...I have copied the most essential of that text below...might be usefull info for you;
-----------------------------------------------------------------------------------
It seems to be two major factors affecting this "stuttering"/"lag" (from my experiences at least...I have used A2DP a lot with my Universal...couple of hours every day);
1. Universal struggling outputting(RAM/CPU...or both!?)
One help here is to apply the registry "A2DP priority" fix (found it in the forums here...and so did richardlai).
Another is to close all programs before using it (I usually do not do this...I usually only do it in hindsight when I get the problem).
2. Signal between Universal and headset struggling (obstructions between Universal and headset, WiFi nearby, so forth)
I for example get this problem if I put my Universal in my trouser pocket (I know, I must have big pockets, and walk around, I get stuttering/lag occationally. If I then take it out, and hold it in my hand farily still when I walk...no stuttering. I have found, that when I walk, it is Ok to have it in my backpack/rugsack...then for some reason it very rearly stutters...so I usually do that.
But when I walk of the bus at work, and walk into the "campus" of my workplace, which is cramped with radiotransmitters (is norways largest Telecom company)...I get a lot of stuttering, and need to take it out of backpack, and hold it in my hand, at it gets a lot better.
In short: A2DP with the Universal works, but is sensitive to disturbance/obstructions/moving around...and to make it worse, it is also sometimes dependant of the Universal itself struggling with CPU/RAM. So you can not totally get rid of the problem...but you can do a lot to minimize it...I almost never experience it now...except in the campus-area at work that is.
I have BTW had the exact same problems before with Qtek 2020 and Qtek9090 (which I got hold of some "A2DP patches", when I had those devices). ...but I really had a LOT more stuttering with those two...so much so, that I never used A2DP with them on a daily basis.
-----------------------------------------------------------------------------------
I also wrote a short post on my experiences with the different stereo headsets I have...yes, they actually act a little bit different it seems (regarding resume/pause button, and how easy/automatic they "reconnect"). You can see it here; http://forum.xda-developers.com/viewtopic.php?t=47977
Hope this is of some help for you!
RonnyGydar: I came across your little summary a little while ago and have done the registry fix, but the problem still exists! Do you think altering the value in some way would help?
richardlai,
I added the registry value manually...found a reg-file (or was it a CAB-file!?) that supposedly should add it...but when I checked later the key was still not added in the registry?
So I added it manually.
BUT, I do still have the problem...but that seems to be radio interference/distance so forth...since when I hold JasJar in my hand and don't move it around, I NEVER have an problem. ...and actually fairly rearly when I have it in my rugsack/backpack.
With 1 or 2 exceptions...where it lagged "all the time"...but then a soft-reset cured it.
So if you have this problem with your phone lying in front of you on the table...then it really sounds like it is the JasJar/Universal that IS the cause (and not interference)...and yes then the registry hack should help.
BUT I have not done any real testing of the effect of it...I am not sure how much effect it really has...all I know is that I had a "lot of problems" with lag before...and now I almost never have it.
...I hate those "diffuse" problems...when it is impossible to measure in a "scientific" way that "this cures it", and "this do not"! :-(
Sorry about the "little help" I give here...but this issue is a bit "fuzzy"...I have gotten it enough under control to that it isn't a problem any more (during a 1 hour workout, I will typically get this gap/lag 0-2 times...and that is not a problem for me...at least compared to what I experienced 6 months ago, where I was lucky if I could hear 10 seconds without any problems).
The stuttering problem seems to be permanent now... Luckily I have a HP hx4700 (which has a Broadcom bluetooth module) and works perfectly with my Jabra HT620s. Anyone using an A2DP ROM other than Qtek? I'd like to try a different ROM to see if it would make a difference.
only a second of sound
i use the qstarz bt stereo headset (http://www.qstarz.com/products/bh-q392s.aspx) and it works fine for phonecalls, but when i set it for wireless stereo and start a media player (TCPMP, WMP, Pocket Player...) i mostly only get sound for one second and then it shuts up. the players keep playing, the buttons on the headset can pause, resume and change tracks but there is no sound at all.
i get full wireless stereo playback occasionally, but i can't figure out what differs from time to time.
i applied the above patch with no success. anyone has a thought on the matter?
Ariel.
richardlai said:
The stuttering problem seems to be permanent now... Luckily I have a HP hx4700 (which has a Broadcom bluetooth module) and works perfectly with my Jabra HT620s. Anyone using an A2DP ROM other than Qtek? I'd like to try a different ROM to see if it would make a difference.
Click to expand...
Click to collapse
I use the BT620s with my Qtek 9000 without much trouble. Here's the trick:
Assuming you have paired with succes. Set headset and BT OFF before starting.
Turn bluetooth ON
wait a second or two
Turn headset ON
wait another two seconds
Now go to BT settings, and connect the headset.
Wait for the little pling sound (the activesync sound ).
Now start Windows Media Player and play an MP3.
Using this sequence has never failed me
edit:
I use the latest OFFICIAL Qtek 9000 WWE ROM. (Without the ExtROM though ) And i did not use any patches regarding A2DP or Bluetooth.
this is what i tried, many times. i get the activesync sound, sometimes from the speakers, sometimes in the headset, but almost always only one second of sound afterwards.
i found that by pairing the headset to the universal by pressing and holding the green button on the headset untill the universal recognises (doesn't take long) gives better results.
pairing it by the instructions of the headset (putting it in discover mode, and then searching for a device with the universal) will give me the one second sound almost every time.
Biffert said:
I use the BT620s with my Qtek 9000 without much trouble. Here's the trick:
Assuming you have paired with succes. Set headset and BT OFF before starting.
Turn bluetooth ON
wait a second or two
Turn headset ON
wait another two seconds
Now go to BT settings, and connect the headset.
Wait for the little pling sound (the activesync sound ).
Now start Windows Media Player and play an MP3.
Using this sequence has never failed me
Click to expand...
Click to collapse
Well, this has ALWAYS been the sequence I use (and I don't think you can do it in any other way). The real problem here is either the buffer memory or processor load.
richardlai said:
Biffert said:
I use the BT620s with my Qtek 9000 without much trouble. Here's the trick:
Assuming you have paired with succes. Set headset and BT OFF before starting.
Turn bluetooth ON
wait a second or two
Turn headset ON
wait another two seconds
Now go to BT settings, and connect the headset.
Wait for the little pling sound (the activesync sound ).
Now start Windows Media Player and play an MP3.
Using this sequence has never failed me
Click to expand...
Click to collapse
Well, this has ALWAYS been the sequence I use (and I don't think you can do it in any other way). The real problem here is either the buffer memory or processor load.
Click to expand...
Click to collapse
Then there is no A2DP problem, the only solution is to lower the overal systemload. Stop all programs you have running, disable every today plugin that need frequent updating (memory, battery meters etc.) Free up as much RAM as you possibly can. I have AT LEAST 16 mb RAM free when playing music via BT.
I searched around, but I didn't find an answer to this specific question. I have an HTC Evo, and a regular Bluetooth headset. I'd like to be able to play music/podcasts/whatnot through the headset.
It works great for phone calls, but once the call is over, it goes back to using the speaker. I'm assuming this has something to do with Bluetooth profiles since I was actually able to play music through Bluetooth in a car I rented a few weeks ago. I had to change the audio setting on the car, so it seems like the Evo can send audio through Bluetooth if it detects a certain profile (A2DP?).
Is there an app that allows me to choose to reroute my audio from the speaker to a regular bluetooth headset that only supports the headset and hands-free profiles? If not, I may need to see how feasible it would be for me to make one.
I have been searching in vane for Android software that would play regular audio through a regular bluetooth ear piece (that is normally used for a phone) rather than the external speaker or audio jack.
If anyone knows of such an animal, please let us know.
I realize what you're asking for, and I'm just going to tell you, odds are it's not going to happen. From what I've heard, the Bluetooth API's are fairly limited, and telling the system to use a BT Profile for something it wasn't meant for (and will sound horrible on, nevermind kill the battery life of your headset) won't be easy.
I'm not saying it's impossible, just not very likely to happen at this time. You'd probably be better off getting a decent pair of BT headphones instead. Sorry.
It won't work. Different protocols. If you get a bluetooth stereo headset that has a mic then it will work with both protocols.
This has been on the top of my list (along with a widget for enabling/disabling background data) since I got my Evo. I used this feature a lot on my Moto Q9C.
But I hadn't been able to find anything until now.
The audio quality isn't great but so far "Super BT Mono Froyo Free" is working well enough. I haven't disconnected my headset yet, so I don't know if it will reboot the phone. But the comments in the marketplace say to use a task killer if it happens.
I'm actually considering getting the full $6 version after the 5 days are up.
I just wish there was a way to make the call button function with the media player instead of starting the voice dialer.
Edit:
Have to change the media volume via settings or when the screen is off to increase music volume.
My jabra bluetooth headset allows this to happen but that bluetooth is meant to stream music through it also.
Sent from my GirLiE Evo with Tapatalk
what about these: http://cgi.ebay.com/New-Black-Motorola-S9-HD-S9HD-Wireless-Stereo-Headphone-/260631900070?pt=Bluetooth_Wireless_Products&hash=item3caedf2fa6
granted, they ship from Hong Kong so you're looking at a good 1-3 weeks for delivery (i got mine in about a week and a half)
But anyways, they work great for me. they answer calls, control track skipping, play/pause and volume. i love 'em.
App Work Around
I had the same issue with my headset. I went to the Android Market and searched. There are multiple apps out there. I got BTmono Free which allows you to play audio over your bluetooth if you pay for the $1 version you get more options. There are a few more other programs out there that do the same thing.
Good luck.
Thanks for the find Abini. d/l'd BTmono and it works like a champ for playing both music and for Netflix on my rooted EVO 2.2
Hey there everybody!
After flashing away from STOCK i've come to notice problems with corded headsets (I'm using normal headphones right now).
For Example, any kind of sound is extremely low volume, that is until i press the button (that normally would trigger some kind of phone function, or the voice search - which it doesn't).
This only exists with corded headsets for me, not bluetooth ones.
Anyone else have this? Any ideas on this?
Shoot!
I had noticed when I flashed GBTweaked on my phone, I had plugged in an older headset and it stated that my device was not compatible with my phone; even though I had no issues with the stock.
I wasn't really concerned about it as I typically use my bluetooth headset anyway... In fact I can't even remember why I had pulled out that headset to begin with.