This is what i did.
Bought This car mount
Used "WOOT"(without ") to get 20$ off.
Shipping Cost: $5.00
Grand Total: $9.99
then i bought This cover to put the disk on
used "30htcoff" to get 30% off HTC Accessories
Total : US $7.04
grand total for a car mount...
17.03$
I have the same mount. works ok. instructions say mount the disk on the upper portion of the case, i found the middle works better if you intend on using landscape mode for GPS or Video. If you put it near the top, it doesnt stay in landscape mode for long, it slips down.
I use something similar, but more flush against the car surface for the Evo.
http://cgi.ebay.com/NEW-UNIVERSAL-M...ccessories&hash=item45e943669b#ht_3019wt_1139
I tried the cheap car mount, but without the case. The disk adhesive wouldn't stick to the back of my EVO at all. Whenever I tried to lock the disk into the holder, it'd just twist off.
derik123derik123 said:
This is what i did.
Bought This car mount
Used "WOOT"(without ") to get 20$ off.
Shipping Cost: $5.00
Grand Total: $9.99
then i bought This cover to put the disk on
used "30htcoff" to get 30% off HTC Accessories
Total : US $7.04
grand total for a car mount...
17.03$
Click to expand...
Click to collapse
How easy/tough is the crystal hard case to put on and remove? Everytime you get in the car, you'd have to put the phone in the case, and take it out of it, when you get out, right?
chinot66 said:
I use something similar, but more flush against the car surface for the Evo.
http://cgi.ebay.com/NEW-UNIVERSAL-M...ccessories&hash=item45e943669b#ht_3019wt_1139
Click to expand...
Click to collapse
thats way too flush dos not give me the option to tilt and stuff.
hkk said:
How easy/tough is the crystal hard case to put on and remove? Everytime you get in the car, you'd have to put the phone in the case, and take it out of it, when you get out, right?
Click to expand...
Click to collapse
I haven't gotten it yet. But i don't think that it'll be a major problem. It goes over the existing case. So i'm just going to put the disk on the clear cover, put that on the mount and whenever i get in my car just put it in the case.
I just ordered a Seidio active case and the mount that the OP linked. I'm hoping that disc is small enough to not annoy me if it's on the case all the time, but we'll see I guess. I'm afraid it's going to cause some wobbling issues when the phone is sitting face up on my desk.
Edit: I was just thinking, it would be pretty stellar if seidio offered an "exoskeleton only" type of sale so you could just throw the disc on an extra skeleton to slip on when in the car only... Wishful thinking I'm sure.
What do you guys think about this idea..
Get the same SoundGate mount but stuck the disc on the outer shell/exoskeleton of this two-piece case.
http://forum.xda-developers.com/showthread.php?t=699888
Then keep the exoskeleton in the car and when you want to use it as a mount just pop it into place..
I don't know how it feels in the hand without the exoskeleton though, and it wont be as secure but I had no intention of getting a case that strong, just a silicone one.
My main gripe is that I don't want to have a disc on my phone all the time...
edit: LOL just read the last post, seems like you were thinking the same thing..
Someone should contact seidio about that.
topdnbass said:
What do you guys think about this idea..
Get the same SoundGate mount but stuck the disc on the outer shell/exoskeleton of this two-piece case.
http://forum.xda-developers.com/showthread.php?t=699888
Then keep the exoskeleton in the car and when you want to use it as a mount just pop it into place..
I don't know how it feels in the hand without the exoskeleton though, and it wont be as secure but I had no intention of getting a case that strong, just a silicone one.
My main gripe is that I don't want to have a disc on my phone all the time...
edit: LOL just read the last post, seems like you were thinking the same thing..
Someone should contact seidio about that.
Click to expand...
Click to collapse
hah good call.
Yeah that's what i'm planning on. My OP shows what i bought for this.
topdnbass said:
What do you guys think about this idea..
Get the same SoundGate mount but stuck the disc on the outer shell/exoskeleton of this two-piece case.
http://forum.xda-developers.com/showthread.php?t=699888
Then keep the exoskeleton in the car and when you want to use it as a mount just pop it into place..
I don't know how it feels in the hand without the exoskeleton though, and it wont be as secure but I had no intention of getting a case that strong, just a silicone one.
My main gripe is that I don't want to have a disc on my phone all the time...
edit: LOL just read the last post, seems like you were thinking the same thing..
Someone should contact seidio about that.
Click to expand...
Click to collapse
This is the setup I'm using with that exact case. I did have a problem with the disk sticking like someone mentioned earlier (I believe because of the ruberized texture on the case) so I epoxied the disk to the back. I can post picks of my setup tomorrow. Maybe a vid too.
That'd be wonderful.
I feel like without the exo it'll look bad...
So a good video or couple pictures would be great, maybe even a short review. xD
Sent from my Evo 4G
i bought a 4 finger capture (for the phone) with a swivel mount for $15 at AutoZone. dam swivel didn't work so i had to add some Metal putty to harden the swivel in place. $5
then when i stuck it to the windshield the glue on the pad to the mount came apart from the heat in the car. super glued it for $3. then the pad's glue to the windshield came apart because of the heat and weight. so i super glued it to the windhield.
with the 4 fingers it grabs the EVO good enoungh that it doesn't fall out AND i can drive around and shot a video of where i'm going. i offset the EVO a tad so the camera has a clear view.
i mounted it to the top of the windshield where the polarized screen is and the videos are coming out pretty good - no blown out skies and the clouds are pretty good. now there is a bright line blowning out the sky and clouds when driving up hill but i can live with that.
topdnbass said:
That'd be wonderful.
I feel like without the exo it'll look bad...
So a good video or couple pictures would be great, maybe even a short review. xD
Sent from my Evo 4G
Click to expand...
Click to collapse
Work's been busy the last few days and I've been too wiped to do anything after, so hopefully I can put something up tomorrow.
Update: the car was pretty hot the other day and when I went to put my phone in the "dock" the adhesive had softened up and the holder fell off of my mount, so I think I will be getting the epoxy out again.
Related
I don't take credit for the video but I found THIS low profile car mount that's made for the iPhone and works just as well for the EVO. HERE it is at Amazon.
i really like this! it looks classy. plus the phone seems more secure in the cradle then in some of the other car-mount solutions i've seen. thanks for pointing this out!
I'm going to pick one up on payday and I'll see how good it is and give a report back.
Sent from my EVIL EVO using XDA App
I've had that one for a while. Very nice.
My only complaint is that in portrait mode I have knocked the phone out of it a couple times. It's plenty solid, it's just not that hard to flip the phone out of it.
Do you guys think there's any chance an Evo with the Seidio Innocase Active would fit in this?
ShadoX said:
Do you guys think there's any chance an Evo with the Seidio Innocase Active would fit in this?
Click to expand...
Click to collapse
The video has a quote that says it should work with thinner cases but not thick ones. I personally have a carbon fiber skin on mine and I'm pretty sure it will work as the guy in the video, his phone is naked. I don't know what differentiates a thick from a thin case but you could always order it and if it doesn't fit you could just say it doesn't fit and return it, but then you would have to eat the shipping cost. Your guess is as good as mine. Maybe someone will come on here that has a thick case and give his thoughts on the matter. Sorry I couldn't be more helpful.
Cheers...
EDIT: There is a comment below the video that say:
Unfortunately it does no work with one of those rubber-like cases. I tried with the one manufactured/distributed by HTC for the Evo and it would not fit in mount. There is still a slight chance that if it was in a thin hard case it might work.
Click to expand...
Click to collapse
Wow, finally installed this in my wife's Mazda 3 (vent mount) and it just rocks. Super sturdy in either portrait or landscape, easy to snap the EVO in and out. Thanks a bunch to the OP for the tip. Hard to beat this one for the quality, ease of use, and price.
I love this car mount, thanks for the tip.
Good to know guys. Now I'm going to order one. Thanks
Sent from my EVIL EVO using the XDA app.
AcIdC0R3 said:
Good to know guys. Now I'm going to order one. Thanks
Sent from my EVIL EVO using the XDA app.
Click to expand...
Click to collapse
$11.99 AR now at buy.com
scl23enn4m3 said:
$11.99 AR now at buy.com
Click to expand...
Click to collapse
Nice find. Thanks.
just ordered mine off Buy.com can't wait to get it.
main reason i want one is because it's a pain in the ass to hear my ringtone in a jeep with the top and doors off. it would be nice to see a call come in while driving.
Terax XWAY. Strong enough magnet to hold into the phone even with the ridiculous spension setup I have in my Integra. I love using it, and it's completely portable, like throw it in your pocket, take 5sec to put in in another car, and go.
Link: http://cgi.ebay.com/TETRAX-XWAY-X-W...785?pt=LH_DefaultDomain_0&hash=item1e5e334759
omnirage said:
Terax XWAY. Strong enough magnet to hold into the phone even with the ridiculous spension setup I have in my Integra. I love using it, and it's completely portable, like throw it in your pocket, take 5sec to put in in another car, and go.
Link: http://cgi.ebay.com/TETRAX-XWAY-X-W...785?pt=LH_DefaultDomain_0&hash=item1e5e334759
Click to expand...
Click to collapse
Nice omni, i might order this as well. i really like how well that seems to work. although it's double the price i just paid for the Kensington mentioned my the OP. we'll see how well the kensington holds up first.
omnirage said:
Terax XWAY. Strong enough magnet to hold into the phone even with the ridiculous spension setup I have in my Integra. I love using it, and it's completely portable, like throw it in your pocket, take 5sec to put in in another car, and go.
Link: http://cgi.ebay.com/TETRAX-XWAY-X-W...785?pt=LH_DefaultDomain_0&hash=item1e5e334759
Click to expand...
Click to collapse
Only vent mountable. There seems to be no goose neck for the windshield. This would not serve my purpose. Plus it seems a little bulky compared to the Kingston. It is also more expensive than the Kingston. No thanks... I'll stick with the Kingston.
AcIdC0R3 said:
Only vent mountable. There seems to be no goose neck for the windshield. This would not serve my purpose. Plus it seems a little bulky compared to the Kingston. It is also more expensive than the Kingston. No thanks... I'll stick with the Kingston.
Click to expand...
Click to collapse
And it would mess with the compass apps and we'd have to stick something on the Evo
Just thought I'd chime in and report how it works with the Seidio Innocase Surface II.
The phone with case on fits fine. The issue is because of the added 2-3 mm of thickness and the smooth feel of the Innocase, it makes it infinitely easier for the phone to slip out of the mount. I haven't had it fall out on me since I always keep my phone in the landscape position while in my car but it will slip if you drive over bumps while its in portrait.
I'm looking into getting some kind of rubber tape so I can make the grip the mount has on the phone a bit more tacky.
I finally ordered this mount and when I get it I'll see about doing a small video review so as to let everyone know what it's like. It's made for the iPhone and wouldn't you know it, EVO is stealin' the show once again. LOL Man I like my EVO. It's such a kick ass phone. Now with an awesome low profile car mount I can finally use it with Google Navigation point-to-point and not have to keep looking down at it while it's laying on the passenger seat.
Cheers...
scl23enn4m3 said:
$11.99 AR now at buy.com
Click to expand...
Click to collapse
Thanks for the find. I used Buy.com to purchase it. $12 is a steal.
Cheers...
I am assuming the Seidio 3500mah battery won't fit in this? Anyone?
So I'm sure everyone has seen the DIY android car dock. There was a thread in here with someone wanting to make something similar (and me silently stalking it), but no one had found a suitable case to make the mount from. Well, I went on ebay and was able to find one, so here's some pics of the finished unit. Sorry there are no before pictures, I forgot to take them in my excitement.
The case cost me about $5. The other parts used were a garmin gps suction mount, the clip to hold a garmin gps, and some double sided tape. I simply used a dremel tool to cut off the ends of the gps clip to provide a flat surface, and attached it to the case with the tape. Looks somewhat ugly due to the clear case color(couldn't find a black one) but it works well, rotates, and looks good with the phone actually in it.
Well apparently I can't post external links(the images), but there's no way to upload the images here.
The USB ciggarette adapter
http: // imgur.com/WhHe1.jpg
The case/mount/tape
http: // imgur.com/ZRIQh.jpg
http: // imgur.com/qZ5Aj.jpg
http: // imgur.com/VJ5YJ.jpg
The phone mounted in my car:
http: // imgur.com/ZH5or.jpg
http: // imgur.com/TTowp.jpg
Linked...
The USB ciggarette adapter
http://imgur.com/WhHe1.jpg
The case/mount/tape
http://imgur.com/ZRIQh.jpg
http://imgur.com/qZ5Aj.jpg
http://imgur.com/VJ5YJ.jpg
The phone mounted in my car:
http://imgur.com/ZH5or.jpg
http://imgur.com/TTowp.jpg
Click to expand...
Click to collapse
Looks nice. How does the Captivate fit in the case, does it just snap in? I can't see how is it mounted it on the car... vent clip?
aloant said:
Linked...
Looks nice. How does the Captivate fit in the case, does it just snap in? I can't see how is it mounted it on the car... vent clip?
Click to expand...
Click to collapse
Thanks for posting the links. Yeah, it just snaps into the case. The gps mount I'm using is the suction cup mount as it fits nicely onto my stereo face. It's just a regular garmin gps ball mount clip that I cut the ends off. It's 2 pieces, the mount, and the clip part, so you can use it with the vent mount.
Nice job. Other than the tape, it looks good. This seems to be the mod of choice for DIY car docks. I don't see why manufacturers can't seem to make this a retail product. Just a snap-on/slide-in back plate with a ball cup on the back. Anyway, thats a nice way to take your captivate for a ride!
I would like to do the same thing but my concern is the fit of the case to the phone. I want it to be snug but remove easily without scratching/damaging from repeated use.
Do you feel confident that case will hold up?
If you do, mind throwing out a brand name or model number?
Shovelhead84 said:
Nice job. Other than the tape, it looks good. This seems to be the mod of choice for DIY car docks. I don't see why manufacturers can't seem to make this a retail product. Just a snap-on/slide-in back plate with a ball cup on the back. Anyway, thats a nice way to take your captivate for a ride!
I would like to do the same thing but my concern is the fit of the case to the phone. I want it to be snug but remove easily without scratching/damaging from repeated use.
Do you feel confident that case will hold up?
If you do, mind throwing out a brand name or model number?
Click to expand...
Click to collapse
My concern as well. I'd change up the mounting a bit for my car since there's a plate the previous owner mounted an XM radio head and I can't take it out without leaving an eyesore. If this can go there, my car will be /perfect/.
I'd actually prefer some sort of clear sleeve (think the "case" that comes with the N1) so that after I get my permanent case I don't have to snap it in and out of both, but if that's what it will take, I'll do it.
@Shovelhead84: Yeah, the tape isn't the best looking. I really wish the snap-on case was black, so you couldn't see it at all. It's kind of an eyesore in my mercedes without the phone in it, lol.
The case itself fits the phone pretty well, and it fits in pretty easy. It's not quite as easy to remove the phone, but still easy enough. I'm really not sure why no one is making docks like this either, all of the one's I've seen have been gigantic and ugly. I'm not worried about it damaging the phone, as the case only covers the back.
I'm not sure what the brand is since I got it off ebay, but here's a link to the exact one I bought.
http: //cgi.ebay.com/SAMSUNG-i897-CAPTIVATE-AT-T-SNAP-OEM-CASE-COVER-/350388879623?pt=PDA_Accessories&hash=item5194ce0107
BigJayDogg3 said:
My concern as well. I'd change up the mounting a bit for my car since there's a plate the previous owner mounted an XM radio head and I can't take it out without leaving an eyesore. If this can go there, my car will be /perfect/.
I'd actually prefer some sort of clear sleeve (think the "case" that comes with the N1) so that after I get my permanent case I don't have to snap it in and out of both, but if that's what it will take, I'll do it.
Click to expand...
Click to collapse
Yeah, it would be nice if the phone just slid into the case. Unfortunately all of the cases I've seen snap together around the phone, so this was the first one I found that appeared to even be useable for a car mount. Hoping I'll find something a little better later. This definitely works well enough for now though, and the price was hard to beat (I had the garmin parts sitting around from my gps I don't use).
phone damage
have you noticed any scratches or scuffs from taking the phone in and out often?
i am with you waiting on that sleeve type case like in that original video
epoplive said:
@Shovelhead84: Yeah, the tape isn't the best looking. I really wish the snap-on case was black, so you couldn't see it at all. It's kind of an eyesore in my mercedes without the phone in it, lol.
The case itself fits the phone pretty well, and it fits in pretty easy. It's not quite as easy to remove the phone, but still easy enough. I'm really not sure why no one is making docks like this either, all of the one's I've seen have been gigantic and ugly. I'm not worried about it damaging the phone, as the case only covers the back.
I'm not sure what the brand is since I got it off ebay, but here's a link to the exact one I bought.
http: //cgi.ebay.com/SAMSUNG-i897-CAPTIVATE-AT-T-SNAP-OEM-CASE-COVER-/350388879623?pt=PDA_Accessories&hash=item5194ce0107
Click to expand...
Click to collapse
How did you get the case for like $5? The listing is about $13
I just had a tinkering revelation and ended up making something in 30 seconds that i have been looking for for weeks.
Originally inspired by the car dock epoplive made as well as khaaan on Overclockers UK forums, I cut out the intermediary step of finding a case that the phone can snap in and out of easily. I ordered a suction cup mount for a Garmin Nuvi 205 off ebay for $4:
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270626403250&ssPageName=STRK:MEWNX:IT#ht_2572wt_1137
When I got it this afternoon, I took a look at the clip that is meant to hold the Garmin unit and thought that it looked quite close to the dimensions of the Captivate. Holding the phone in it, it was about 1/2" - 3/4" too wide. So I simply took a lighter, slowly and gently heated up the corners of the clip, and bent them slightly inwards. Out of luck, my guesswork bending resulted in a perfect fit. I added some thin sticky-back foam strips to make the fit more secure, and that's it!
The phone snaps in with purpose and is held in place even as I flail about testing it. It looks super clean, works well, was easy to make and cost a total of $4.
(The pictures were taken with my old E71x; when I find the charger for my point-and-shoot, I can get some better quality pictures up.)
Follow-up videos
For a little more detail and viewing angles:
http://www.youtube.com/watch?v=qcB3DQ8JKM0]
and my flail test, if any of you doubt how secure this is:
http://www.youtube.com/watch?v=igZ9sPxPG2k
Enjoy! I am happy to hear any criticism, answer and questions, etc.!
Nice! I'm doing one too!
Great mount.
I think you did a great job. I've been looking for one for a while. What if you have a silicon case? Would it still lock?
If so, you wouldn't need the foam.
stanggman75 said:
I think you did a great job. I've been looking for one for a while. What if you have a silicon case? Would it still lock?
If so, you wouldn't need the foam.
Click to expand...
Click to collapse
That was one of my first thoughts. I just returned my bodyglove case, but it seems like it would work just as well, you will just need to bend the clip just a little bit less to compensate. One thing I should tell you, you may need to modify the clip in such a way that the ridges that hold the device are further *out* to compensate for the added depth of a silicon case too.
Nice! Good job.
Nice! I may have to go get a new car clip to try this. It's kind of funny, because the first thing I thought about the clip was 'Boy, this sure is close to the size of the phone, if only it was just a bit smaller'.
Does the phone stay in when you rotate it?
Yes! I just drive for about a half hour on back roads with the phone in portrait and it didn't move one bit. Did you see my "flail test" video?
awesome!
Exactly what I was looking for.
I'm interested to see if someone gets this working with the bodyglove silicone case...
If i can find a Garmin dock for an acceptable price on Amazon or in person, then ill give this a try.
Great work guy.
Sent from my SAMSUNG-SGH-I897 using XDA App
Car Mount
If you are lazy like me have a look on Ebay. There is 1 for $7.99 shipped with battery charger.
BigJayDogg3 said:
If i can find a Garmin dock for an acceptable price on Amazon or in person, then ill give this a try.
Click to expand...
Click to collapse
So is ebay out of the question for you? There are plenty for sub-$3 on there.
I looked at Staples a couple weeks ago and they have just the ball joint and suction cup (no actual clip) for I think $14.99 - outrageous.
Awesome! I just order two. Thanks for the tip!
Does this scratch the sides at all from being clipped in and out so often or did you put foam on the clips where the phone would touch as well?
just ordered one... think i will pop off the ball joint and drill a screw through the center and attach to my pivoting blackberry 9700 proclipusa mount in my car. That way i got the pivot and it is mounted and not on the glass.
will update with pictures... will probably still order the proclip when it is released...
Surprisingly enough, it is out of the question. I've no credit card. With amazon i can use a coinstar to create gift cards. And in person i can use cash or a check.
Sent from my SAMSUNG-SGH-I897 using XDA App
penguin6 said:
Does this scratch the sides at all from being clipped in and out so often or did you put foam on the clips where the phone would touch as well?
Click to expand...
Click to collapse
No foam on the clips. The plastic is smooth, since it is where the gps would clip in. I don't see any trace of damage in the phone (and believe me, I would notice. Still babying this phone)
BigJayDogg3 said:
Surprisingly enough, it is out of the question. I've no credit card. With amazon i can use a coinstar to create gift cards. And in person i can use cash or a check.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If you have a bank account, papal can use that.
Krad said:
That way i got the pivot and it is mounted and not on the glass.
Click to expand...
Click to collapse
I dont fully understand what you mean. Mounted on what glass?
Alternatively, i can be patient and wait for the promised pictures.
Winnergear asked me to do my mini-review on the Montar Universal car mount and I obliged . Being I do a lot of accessory reviews here to give back to the great XDA community, here is another one for ya. I know there's another thread about it, but I didn't want this post get buried in the thread so....
I got this yesterday and decided to do a day of testing before doing one of my reviews. I usually just pop the box open and post pretty much right away . But not this time! I was busy at work anyways lol.
First off, the box is the normal boxes that you see from time to time and it is a nice small frame box, but in transit, if not boxed, will be damaged in transit. The mount includes a mounting disk for your dash for even more sticky-ness. I already have one installed due to my old gps units.
When I first tried it out in the truck, I peeled off the protective cover of the adhesive sticky pad side, which is a lot like the Nexus Wireless charger backing. Once you feel it loses any tackyness, just wipe with a damp paper towl and it's magically refreshed. I placed it on my dash plate and it immediately stuck. Pushed down the lever to anchor it and this thing is not coming off! It will tear off my dash plate before coming off. Really impressive.
I currently have a Seidio Ledger flip case and was curious in how this universal would fare with it on. I thought, because of the grippy rubber red "teeth" it should grab and hold anything you throw at it. Was I right? Yep lol. Ok that is pretty cool. Using a flip case and placing the flap on the back or even have the hinge side of the case facing down and letting the cover flap open with gravity. Either way works and works well. The phone is not dropping from this device.
Before moving on, the base is nice and sturdy and the ball joint is maneuverable and can do a 360. Smooth operating. You just unscrew the area where the ball joint is and then adjust accordingly. What I usually do is just unscrew it just enough where it can move around pretty well and then when satisfied screw the joint adjuster until tight so the phone won't flop around. Another thing is that the grips open on both sides. So you can do a one handed mount. I have not perfected the one handed dismount yet, but that's fine lol.
Anyways, the phone is pretty much anchored where ever you place it. Overall, this a premium universal mount, if you can call it that lol. I can see this fitting many many type of cases without any issue. And the sticky mount is the best I have tried so far in the car. Can I recommend this? Well it is a premium device as I said, so the cost of the mount is around $35 USD. Not too high up, to me just at the top side of my range on what I would spend on a dash mount. Being this a really good one, I feel good recommending it to anyone that is willing to pay for what you get. A solid universal mount that will last past this N5 and many others IMO.
Pros:
Size is middle range.
Can pivot 360 so you can see your device at any angle.
Rubber teeth holds firm
Sticky pad is VERY sticky.
Cons:
Sticky pad can get dusty really really really fast.
Color is shiny gloss black like other car mounts I have used with the exception of the Xenomix brands which are matte black, but much more expensive. As a result, can get scuffed like mine is on the back side.
Wishlist:
Cord management
Or ability to house a wireless charger pad by an insert or different "grip".Not an engineer, sorry lol.
Recommend? Yes over any Arkon mount you can throw at it. For being that I can get it in the US pretty fast, I can recommend this. Will I stop using my Kenu Airframe? Probably not, but this is a great alternative.
Any questions, please ask away! Oh I'll be getting a Spigen SGP Neo Hybrid case where I can test with that on as well. I don't foresee any problems, but just a FYI.
Linkage
UK Amazon
http://amzn.to/1jEyJyn
US Amazon
http://tinyurl.com/kjy4e5d
Might be a strange question, but has anyone actually bought a Montar mount and received it? It seems like every review I have seen was when Montar has sent the person one to review. I tried to order one last year and I found a lot of negative feedback about the company claiming they never received their item or it took months for them to actually get it. I ended up buying a similar mount on Amazon. But yeah, just curious has anyone actually bought one from them and what was the service like?
EDIT: Sorry, disregard my post. I just saw your Amazon link. When I originally was going to order it it wasn't on Amazon but on their own site which is what was getting negative feedback.
I received mine long time ago ... Amazing mount , built to last ...
Nice review. Thanks
no doubt .. it's the best !
+1
Can you give us the measurements of the dock? I'm mainly after the height and also the max width of the grip. I have a 9cm mat that I want to mount if possible. Thanks!
Nice
What is everyone using?
My old side spring grip style one isn't going to work. I love the thing but it either presses on the volume buttons or activates Assistant. Have any of you found one that works without these issues?
I'm considering one of the magnetic ones but I don't like the idea of having to add a piece of metal to the back of my case.
Any success stories?
I've been using this one since my pixel 1. Love it, the build is ridiculously solid, I'll probably never need to buy a mount ever again. It's only a few solid aluminum pieces. The metal plates you put on your case are very thin. The magnetic pull doesn't start until it literally gets to the plate. The plate doesn't look bad. But that's the only draw back I think. I'm happy with it though. Good luck!
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
https://clutchit.com
Sent from my Pixel 2 using Tapatalk
Izeltokatl said:
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
https://clutchit.com
Click to expand...
Click to collapse
That is pretty cool. Make a good Xmas gift too.
Izeltokatl said:
I've been using this one since my pixel 1. Love it, the build is ridiculously solid, I'll probably never need to buy a mount ever again. It's only a few solid aluminum pieces. The metal plates you put on your case are very thin. The magnetic pull doesn't start until it literally gets to the plate. The plate doesn't look bad. But that's the only draw back I think. I'm happy with it though. Good luck!
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
I really like the looks of those! Very clean.
Have you had any issues with the phone wanting to spin on the mount?
Thanks,
Jared
I'm waiting for my Pixel 2 to arrive, but I use a Spigen Magnetic Mount for my air vent currently. They offer a windshield/dash mount also. It holds very tight, but not too tight. No issue with the phone falling and/or rotating during driving.
I'm wondering if any of the Spigen cases will work without the need to put the metal plate inside. I currently have the metal plate inside the back cover of my Galaxy S5, but I can tell there is a bulge where it is placed.
I'm on the list to be notified when these release. By far the best holder charger combo I've ever used https://www.proclipusa.com/category/google-pixel-2
Can't tell you how disappointed when I popped my new phone into the dash mount only to watch the volume drop on it's own. The volume rocker placement on the Pixel 2 leaves a lot to be desired. I'm not a huge fan of magnets interfacing with computers to be honest. Hope I can find a decent alternative.
I use the Tetrax, both the Fix and Xway. Most of the time I use the Fix, because I like having my air vents actually blowing air on ME, but in the summer, on a long drive, using the GPS and charging the device, it can sometimes get warm. I just take it off the Fix, and move it to the air vent to let the air conditioner cool it down. I've used this system for nearly a decade, not sure if the Pixel 2 will get warm enough to need the air vent.
The only thing you need to put on the phone is a small metal button. The package comes with several sizes. I adhere this to my Spigen Thin Fit case, so it doesn't have to be attached to the actual phone.
http://store.tetrax.us/en_us/featured/tetrax-fix.html
http://store.tetrax.us/en_us/featured/xway.html
ClutchIT magnetic mount system.
krelvinaz said:
That is pretty cool. Make a good Xmas gift too.
Click to expand...
Click to collapse
I got two of these yesterday, one for me and another for a Xmas gift.
Works great. I have had co-workers, friends and family who have seen it, express interest in getting one for themselves.
I order 6 extra plates to go with each unit. It already comes with several extras. I have only used one plate so far because a allot of places I will use it are metal surfaces.
I put the thin disc on the back of my phone and put my case back on. Nothing to see until I actually use it.
Good mount.
https://clutchit.com
Ok
Brodit
Adjustable active Brodit + ProClip :good:
I started using the Scosche magnetic mount with my Pixel 2 and really like it. The metal plate on the phone is very thin and I can't see it since I have a black TPU case. If you don't use a case or have a transparent one, you'll need to be ok with being able to see that. I already had a mounting surface on my car so I just stuck the magnet to that. I haven't noticed the magnet doing anything funky to my phone.
Shibang said:
I started using the Scosche magnetic mount with my Pixel 2 and really like it. The metal plate on the phone is very thin and I can't see it since I have a black TPU case. If you don't use a case or have a transparent one, you'll need to be ok with being able to see that. I already had a mounting surface on my car so I just stuck the magnet to that. I haven't noticed the magnet doing anything funky to my phone.
Click to expand...
Click to collapse
I second this, I find the magnetic car mount is by far the best I've ever used, the one i previously used, used to activate active edge or turn volume down, which was quite annoying.
Scosche
I was using Scosche before Brodit.
awesome