How to remove apps????? - Desire Q&A, Help & Troubleshooting

I bought the Telstra Desire and it came loaded with bloatware (Big Pond, Citysearch, and about 15 other programs that serve 0 function) and tried uninstalling them but they won't uninstall. I also downloaded "Quick Uninstall" and "App Monster" and they can't uninstall them either. Is there any way to get rid of them without having to flash a third party rom?

via ADB. You'll need to download the SDK for Windows though.
Boot into bootloader. (Volume down and press power)
Scroll down to recovery by pressing the volume down key and then press the power button again.
Open a command prompt at the tools folder of the SDK and type the following.
Code:
adb shell
Code:
cd system/app
Code:
ls
Then that should give you a list of the apps installed. Remove them by typing
Code:
rm EmailGoogle.apk AnotherApp.apk
Get my drift?

dnlgee said:
via ADB. You'll need to download the SDK for Windows though.
Boot into bootloader. (Volume down and press power)
Scroll down to recovery by pressing the volume down key and then press the power button again.
Open a command prompt at the tools folder of the SDK and type the following.
Code:
adb shell
Code:
cd system/app
Code:
ls
Then that should give you a list of the apps installed. Remove them by typing
Code:
rm EmailGoogle.apk AnotherApp.apk
Get my drift?
Click to expand...
Click to collapse
Dnlgee: Pls how do how copy file from PC in the same mode to the /system/app?
and how can I load .zip file on PC with commands?

i thought you wanted to remove these apps, its better to just install apps normally so that they can later be removed.
but if you want to copy files to the phone type:
adb push /path/to/file.apk /path/to/install/location/
and to copy files from your device to your computer:
adb pull /path/to/file.apk /path/to/extract/location/
hope this helps.

Related

I'm lost. Need rooting help.

I'm lost as hell. I found this thread:
http://www.androidpolice.com/2010/06...credible-next/
I did the unrevoked thing and I see this icon called SuperUser Permissions in my app list.
Am I able to proceed and fully root or do I have to re-do the root with the Toast method? This looks too complicated and by the way I tried the ./adb thing on my mac and I get errors saying "No such file or directory".
gqstatus0685 said:
This looks too complicated and by the way I tried the ./adb thing on my mac and I get errors saying "No such file or directory".
Click to expand...
Click to collapse
adb isn't installed on a Mac out of the box; You'll need to go download the Android SDK. Untar it somewhere (I put it in ~/), then open a term, do:
Code:
cents-macbook-pro:~ $ cd android-sdk-mac_86/tools/
cents-macbook-pro:~/android-sdk-mac_86/tools $ ./adb
CentroniX said:
adb isn't installed on a Mac out of the box; You'll need to go download the Android SDK. Untar it somewhere (I put it in ~/), then open a term, do:
Code:
cents-macbook-pro:~ $ cd android-sdk-mac_86/tools/
cents-macbook-pro:~/android-sdk-mac_86/tools $ ./adb
Click to expand...
Click to collapse
Massive Brain Freeze.. What do you mean by "(I put it in ~/)"?
I downloaded the Android SDK already. I understand what terminal is so when I download the Android SDK where do I place it?
Am I pointing terminal to the directory? Android SDK is currently in a folder on my desktop.
gqstatus0685 said:
Massive Brain Freeze.. What do you mean by "(I put it in ~/)"?
I downloaded the Android SDK already. I understand what terminal is so when I download the Android SDK where do I place it?
Am I pointing terminal to the directory? Android SDK is currently in a folder on my desktop.
Click to expand...
Click to collapse
~ in most flavors of Unix/Linux is short for your home directory. In MacOS, ~ is /Users/<username>. *nix pro-tip:
Code:
cents-macbook-pro:~ $ echo ~
/Users/cent
So in my case, ~ is short for /Users/cent.
If it's on your desktop, open a terminal and type:
Code:
cd ~/Desktop/android-sdk-mac_86/tools
-OR-
Code:
cd /Users/cent/Desktop/android-sdk-mac_86/tools
And then you can proceed to issue your adb commands. Just remember to prefix it with "./", which tells MacOS to look in the current directory for the adb command.
Code:
cents-macbook-pro:~/android-sdk-mac_86/tools $ ./adb devices
List of devices attached
HT05RHL1XXXX device
Ok. I think I'm just going to pay someone to do this for me. I'm getting a migraine.
So I'm basically typing the below:
~/android-sdk-mac_86/tools $ ./adb devices (Do I type this in one line)
List of devices attached
HT05RHL1XXXX device
I ran the thing and it doesn't show my phone listed.
I've got the time, if you have the money!
1. Make sure USB debugging is enabled. On your phone, go to Settings -> Applications -> Development, and make sure "USB debugging" is checked.
2. Make sure your USB cable is connected to your phone and computer.
3. Open a terminal
4. Type "cd ~/Desktop/android-sdk-mac_86/tools" and press enter.
5. Type "./adb devices" and press enter.
If it lists your device, you're then good to go to start following the rooting instructions!
You're the best dude. It was the USB debugging that was giving me the problem.
Good deal man, glad you got that part worked out! Have fun getting your root on!
this is the easiest way to do it....it worked for me
http://forum.xda-developers.com/showthread.php?t=701152
Do i have to keep dubugging mode on or can I turn it off before I root it. I did the command:
"cd ~/Desktop/android-sdk-mac_86/tools"
and then
adb push PC36IMG.zip /sdcard (Doesn't do anything. I tried without the space and some stuff popped up. Can I just manually put it on my SDcard?
gqstatus0685 said:
Do i have to keep dubugging mode on or can I turn it off before I root it. I did the command:
"cd ~/Desktop/android-sdk-mac_86/tools"
and then
adb push PC36IMG.zip /sdcard (Doesn't do anything. I tried without the space and some stuff popped up. Can I just manually put it on my SDcard?
Click to expand...
Click to collapse
Debugging mode needs to stay on if you want to use adb. You can turn it off once you root, but it won't hurt to leave it on.
The push command should tell you the number of bytes transfered. You need to make sure that the file you are pushing is in the current directory you're in (tools), or manually enter the path, like "./adb push ~/Downloads/PC36IMG.zip /sdcard"
But yes, you can mount the card as a disk drive and copy the file there in Finder.

[GUIDE] Mini guide to root Gnex manually

1. Download and install Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0.exe
Link to download: http://www.multiupload.co.uk/YXE6FWLFAR
2. Download and install Android SDK (http://dl.google.com/android/android-sdk_r16-windows.zip)
3. With the phone turned OFF, hold VOLUME UP + VOLUME DOWN and power the phone on. This will put you in bootloader mode
4. Using windows/cmd go to the folder where Android SDK was installed (make sure that the folder android-sdk/platform-tools/ contains fastboot.exe and adb.exe etc....
5. using windows/cmd go to the folder /android-sdk/platform-tools
From this folder try the command "fastboot devices" (do not include ") which should list the device connected to your PC.
6. First we have to unlock bootloader,
use this command to unlock bootloader > fastboot oem unlock
(warning.. you will loose all data)
After the bootloader is unlocked the device will reboot normally.
7. Once normally booted from the command prompt issue the commands given below (after each command press enter button)
Note: you need su and superuse.apk (which can be downloaded from here: https://rapidshare.com/files/1319181583/su.zip)
unzip the downloaded file in the same folder where fastboot.exe exist i.e /android-sdk/platform-tools/
adb root
adb remount
adb push su /system/bin
adb push Superuser.apk /system/app
adb shell chmod 06755 /system/bin/su
adb shell chmod 06755 /system/app/Superuser.apk
adb reboot
Done!... your device is now rooted.
it would be good to note that many people have issues with the initial android driver installation.
if you install the drivers, but the phone doesn't show up after a period of time, open control panel -> system -> device manager and look for any devices that have a yellow triangle error (no driver). right click and open properties, and manually select the driver, not auto! the next screen will give you an option to 'select from a list', do this, and find SAMSUNG, then select the latest drivers.
after this, it can still take a minute or two the first time for drivers to install properly, you usually can see the status of this in the usb system tray icon.
if you rebooted to the bootloader (power vol(+) vol(-)), from the command line, if you type "fastboot devices" it should list a device and serial number. if not, you need to go check your drivers, something is missing. also, don't forget how magical a windows reboot can be at times : )
cancerouspete said:
it would be good to note that many people have issues with the initial android driver installation.
if you install the drivers, but the phone doesn't show up after a period of time, open control panel -> system -> device manager and look for any devices that have a yellow triangle error (no driver). right click and open properties, and manually select the driver, not auto! the next screen will give you an option to 'select from a list', do this, and find SAMSUNG, then select the latest drivers.
after this, it can still take a minute or two the first time for drivers to install properly, you usually can see the status of this in the usb system tray icon.
if you rebooted to the bootloader (power vol(+) vol(-)), from the command line, if you type "fastboot devices" it should list a device and serial number. if not, you need to go check your drivers, something is missing. also, don't forget how magical a windows reboot can be at times : )
Click to expand...
Click to collapse
Hi
Thanks for this note which would help many users.
Hi, noob here.
First of all, thanks for the guide.
I have already unlocked the bootloader about a month ago (up to step 6), but would like to root.
Will my phone lose all data again if I root the phone now? I'm not even sure what this actually does, but would like to learn and mess around with it.
You will not loose data. Rooting gets access your system folders by pushing su and superuser through adb.
Hope it helps.
Sent from my Galaxy Nexus using xda premium
smohanv said:
Note: you need su and superuse.apk (which can be downloaded from here: https://rapidshare.com/files/1319181583/su.zip)
unzip the downloaded file in the same folder where fastboot.exe exist i.e /android-sdk/platform-tools/
adb root
adb remount
adb push su /system/bin
adb push Superuser.apk /system/app
adb shell chmod 06755 /system/bin/su
adb shell chmod 06755 /system/app/Superuser.apk
adb reboot
Done!... your device is now rooted.
Click to expand...
Click to collapse
Did you actually test that with a stock rom?
Because adb root will not work with ITL41F at least.
Code:
./adb root
adbd cannot run as root in production builds
Furthermore the chmod for Superuser.apk is totally bogus. No need to mess with it's permissions.
i think a better way is get su and SuperUser.apk from the developers (ChainsDD) site and install it with a temporary boot CWM to install it.
(these instructions are also from memory And i rooted my one from source, but that's a bit involved)
this would mean instead of step 7 do.
7. Download CWM into the same directory as fastboot
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.5.0.4-toro.img (Verizon)
or
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.5.0.2-maguro.img (GSM)
Make sure to get the right version for your device.
8. download http://downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
onto the internal storage of the phone( "sdcard" )
9. With the phone turned OFF, hold VOLUME UP + VOLUME DOWN and power the phone on. This will put you in bootloader mode
10. again using windows/cmd go to the folder /android-sdk/platform-tools
From this folder try the command "fastboot devices" (do not include ") which should list the device connected to your PC.
11. Start CWM (without installing it)
fastboot boot recovery-clockwork-XXX-XXX.img
(use the right filename from step 7)
12. choose install update and select the zip from step 8.
You need to use volume up/down to navigate and power to select.

(Guide) How to logcat, ADB, shell, etc

ADB:-
Android Debug Bridge
Very useful program made itself by Google for Programmers and developers. Its based on command line and basically communicates with your Android to respond to certain commands. There is vast amount of knowledge about adb but its most useful commands limit to getting:-
Logcat:-
A real time log of what is happening in background of our devices. It is really useful for developers to see which component has malfunctioned and helps to narrow down their search for what failed and what needs to be fixed. Several times users are asked to give logcats of their devices which are giving errors. We will go in detail that how to get logcats in every and easiest way possible.
App Installation and Management:-
adb proves really handy if you want to install apks directly from your PC or want to batch install or delete them.
Shell Execution:-
You must have heard of Terminal Emulator. It is an app for android to execute shell commands(linux commands) which are basically present as applets in /system/bin, /system/sbin or /system/xbin(in our case) folders. A very imporant applet called busybox is installed there mainly used for execution of basic commands during root browsing or ROM installation. Many times updater script of ROMs use busybox commands to install it. Well, these commands can be initiated from your device too but they can be initiated from adb also making it easy for programmers.
Pushing and Pulling:-
Most used commands of adb. adb makes it a piece of cake for new device developers to get an ideo of structure and basic knowledge of devices by pulling command. We can pull out i.e copy any files or folders from our devices to our PC, even the root directories without rooting the devices. It help rooters and ROM chefs of new devices to get an idea and implement their mods on them. Pushing is also very useful command. It copies your files and folders from PC to your device. Very useful in pushing some /system apps and other things
Remounting and setting permissions
Basic commands:-
Of-course basic commands such as reooting and rebooting in recovery ode and download mode are supported.
Others:-
There are several other features of adb such as fastboot, aapt, etc
Setting up ADB
Pre Requirements:-
A little amount of brain
PC(This is a windows guide, if asked I will add linux and mac guide later)
Java Runtime environment or Java Developing kit
Your Device Drivers
An Android Device
Assuming you all these ready and working properly, we continue
If you are having trouble completing Pre-Requisites, there are several guides featuring them too
Start
1. First Download Android SDK. Roughly about 70 MB
2. There may be any compressed zip file or exe file
If zip file, then extract it to C:\android-sdk
If exe file then double click on it and install it in C:\ Drive(or any other drive you want)
3. Now to get adb and other tools, you need to download 'Platform Tools'
To download them, go to the android-sdk folder and double click on SDK Manager
It will ask you which package to download? However, it is your choice which package to Download, but here, we will only talk about platform
Tools. So, simply tick on Platform Tools and click on install. Once you have done it. Go to the platform-tools folder in the directory where you installed android-sdk. You will find several files there like adb, fastboot, aapt, etc
4. Now, you can backup the whole folder of android-sdk to any external storage that will make you not download package
again if you want to. You can have it placed in any computer and run it as it does not require registry to work
5. Now, you are just one step away from using adb. Next step is SKIPPING SETTING ENVIRONMENT VARIABLE
Many guides on internet say that it is to be done for making it easy for users and if you have some basic knowledge of Command Prompt,
you will know that to execute any application with command prompt, you first need to change the directory to the one where application is
placed. And to skip changing the directories every time you open CMD, you need to put that application is environment variable. Howeve, we will not do so.
6. Type cmd in the search bar. Copy cmd.exe from there. Go to the directory where you have installed android-sdk. Go to platform-tools folder. Paste cmd there, right click on it and in the settings, select Run as Administrator.
7. You are done. Now what to do in it?
ADB Commands
Type adb in command prompt. And several commands will show up on your screen. It is very difficult to analyse these all commands, so we will only talk about most used and important commands
Connect your device via USB cable
And open the CMD in platform-tools folder(Make a shortcut of it on desktop). And type the suitable commands
Code:
adb devices
Will show the list of devices attached to the PC andtheir serial numbers. If this shows up correctly on your PC, then it means that everything is fine for continuing.
Logcat
Code:
adb logcat
It will display the real time log of your device
Best time to do it is when your device boots up
Now, many users ask me how to copy the logcat and upload it from CMD
There are several methods:-
1. Right click on the Title Bar of Command Prompt. Hover the cursor over edit and select mark. Select all the things you want to copy and then click enter. All the things will be copied to clipboard.
2. This is the correct way of getting logcat saved.
Code:
adb logcat > logcat.txt
This command will create a logcat.txt document in platform-tools folder with the complete logcat of the device. Ofcourse you can type any name instead of logcat.txt
3. I prefer taking logcat this way as it neatly compiles logs of different time
Code:
adb logcat -v long > logcat.txt
This is a very nice way to get logcat.
Installing Apps
Code:
adb install %PATH OF APK%
This will install an app on your Android
For example, if my app AreeB.apk is in G:\ drive (G:\AreeB.apk)
Then I will type
Code:
adb install G:\AreeB.apk
Be sure your apk is not in a folder that has space in its name, else the command will break at space bar.
For eg:-
G:\Program Files\AreeB.apk
Mounting
However, I never found any problem in tweaking with system files with adb, but some users said that they couldn't do it, so the problem was that their system partition was mounted as Read Only(R/O)
So, it is necessary now to tell how to mount system partition as Read Write(R/W)
Code:
adb remount
It is easiest way to do so, if it does not work then
There is another method that we will discuss in ADB Shell commands section
Pushing and Pulling
For pushing,
Type
Code:
adb push %PATH TO BE PUSHED% %PATH WHERE TO BE PUSHED%
Suppose I have an app named SystemUI.apk(PATH = G:\SystemUI.apk) which I want to push in /system/app/ on my android(or in other words, install an app as a system app). Then I would type
Code:
adb push G:\SystemUI.apk /system/app/
More examples
G:\Dance.txt file to be pushed in Dance folder in sdcard
Code:
adb push G:\Dance.txt /sdcard/Dance/
OR
Code:
adb push G:\Dance.txt /mnt/sdcard/Dance/
G:\Movies folder to be transferred in SDCARD in Videos Folder
Code:
adb push G:\Movies /sdcard/Videos/
G:\system\framework\framework-res.apk to be pushed in /system/framework/
Code:
adb push G:\system\framework\framework-res.apk /system/framework/
For pulling,
push command replaces with pull and paths are swapped
Code:
adb pull %PATH TO BE PULLED FROM% %PATH TO PLACE PULLED FILE%
Example,
All system apps are to be pulled to G:\ROM\system\app
Code:
adb pull /system/app G:\ROM\system\app\
build.prop to be extracted to desktop
Code:
adb pull /system/build.prop C:\Users\Areeb\Desktop\
However, if a folder is in platform-tools folder, you don't need to type full path
Suppose if I type
Code:
adb pull /system/ system
Then a folder named system will be created inside platform-tools with all the files in system in it
If a file is in platform-tools folder, then also no need to type full path
For example,
There is an app name DeskClock.apk in this folder then, to push it to /system/app, type
Code:
adb push DeskClock.apk /system/app/
ADB Shell Commands
This mode of adb allows you to execute linux shell commands from your PC
These commands can aldo be executed through the mobile using Terminal Emulator
To initiate shell mode
Type
Code:
adb shell
You will get an prompt like this
sh-3.2#
Now you are in shell mode
adb commands won't work here and a new set of commands will work here. But we will only go in a little detail here.
Assuming you are in adb shell mode, I will only type commands that will work on shell. Note:- These commands won't work if you type them alone on cmd. But, these command will directly work on your mobile's Terminal Emulator
As these commands can also work on mobile, I am going to tell you a way of taking logcat on mobile
Type
Code:
logcat
You will see log of your device
To save this
Type
Code:
logcat > /sdcard/log.txt
A file named log.txt will be generated in sdcard
Uninstalling Applications
Code:
cd /data/app
This will change the directory to /data/app
Code:
ls
This will show the list of files in there
Suppose, there is an app named com.opera.browser (Opera Mobile) you want to uninstall it
Type
Code:
rm -r com.opera.browser
This will uninstall the app
Mounting Command:-
Code:
mount -o rw,remount system /system/
Miscellanous commands:-
su: Initiates root request
du: Shows files, folders and size
date: Shows todays date
surfaceflinger: Shows your bootanimation (Tested on GB)
grep: Used to search through text files
chmod: Sets permission to files
sh: Initiates shell mode
echo: Displays the text you wrote with the command. Analogous to PRINT command on QBasic
Forgot next ones, will write later
Credits
Google: For Android and several searchings
Samsung: For Galaxy Ace s5830I
Broadcom: For their Open Sourceness
XDA Forums : For the precious knowledge
My Uncle: For gifting me this Phone
My Teachers: For teaching me English(I would not be here without them)
You: For future Thanks
Till now, thats it, will add some more things later
If any problem, I will add it too
Suggestion? They are welcome
Nice thread , every thing is very clearly stated.
Thx, Nice guide.
I suggest to change the 'remount' command in:
mount -o remount,rw /system
As the effect is the same and it works universally (at least, should)
Sent from my GT-5660 using xda app-developers app
ItachiSama said:
I suggest to change the 'remount' command in:
mount -o remount,rw /system
As the effect is the same and it works universally (at least, should)
Sent from my GT-5660 using xda app-developers app
Click to expand...
Click to collapse
I use the command you mentioned every time. Thanks for reminding. I can't remember why I wrote that command there!

[ADB GUIDE] How to use ADB. (Noob edition)

ADB
Android Debug Bridge
Very useful program made itself by Google for Programmers and developers. Its based on command line and basically communicates with your Android to respond to certain commands. There is vast amount of knowledge about adb but its most useful commands limit to getting:-
Logcat:-
A real time log of what is happening in background of our devices. It is really useful for developers to see which component has malfunctioned and helps to narrow down their search for what failed and what needs to be fixed. Several times users are asked to give logcats of their devices which are giving errors. We will go in detail that how to get logcats in every and easiest way possible.
App Installation and Management:-
adb proves really handy if you want to install apks directly from your PC or want to batch install or delete them.
Shell Execution:-
You must have heard of Terminal Emulator. It is an app for android to execute shell commands(linux commands) which are basically present as applets in /system/bin, /system/sbin or /system/xbin(in our case) folders. A very imporant applet called busybox is installed there mainly used for execution of basic commands during root browsing or ROM installation. Many times updater script of ROMs use busybox commands to install it. Well, these commands can be initiated from your device too but they can be initiated from adb also making it easy for programmers.
Pushing and Pulling:-
Most used commands of adb. adb makes it a piece of cake for new device developers to get an ideo of structure and basic knowledge of devices by pulling command. We can pull out i.e copy any files or folders from our devices to our PC, even the root directories without rooting the devices. It help rooters and ROM chefs of new devices to get an idea and implement their mods on them. Pushing is also very useful command. It copies your files and folders from PC to your device. Very useful in pushing some /system apps and other things
Remounting and setting permissions
Basic commands:-
Of-course basic commands such as reooting and rebooting in recovery ode and download mode are supported.
Others:-
There are several other features of adb such as fastboot, aapt, etc
Setting up ADB
Pre Requirements:-
A little amount of brain
PC(This is a windows guide, if asked I will add linux and mac guide later)
Java Runtime environment or Java Developing kit
Your Device Drivers
An Android Device
USB Debugging MUST be turned ON in the device for ADB to see it & Developer options is hidden in Android 4.2 and
above, Hitting Build number 10 times in
About Phone/Tablet reveals the menu (Thanks lilHermit for reminding me to add it)
Assuming you all these ready and working properly, we continue
If you are having trouble completing Pre-Requisites, there are several guides featuring them too
Start
1. First Download Android SDK. Roughly about 70 MB
2. There may be any compressed zip file or exe file
If zip file, then extract it to C:\android-sdk
If exe file then double click on it and install it in C:\ Drive(or any other drive you want)
3. Now to get adb and other tools, you need to download 'Platform Tools'
To download them, go to the android-sdk folder and double click on SDK Manager
It will ask you which package to download? However, it is your choice which package to Download, but here, we will only talk about platform
Tools. So, simply tick on Platform Tools and click on install. Once you have done it. Go to the platform-tools folder in the directory where you installed android-sdk. You will find several files there like adb, fastboot, aapt, etc
4. Now, you can backup the whole folder of android-sdk to any external storage that will make you not download package
again if you want to. You can have it placed in any computer and run it as it does not require registry to work
5. Now, you are just one step away from using adb. Next step is SKIPPING SETTING ENVIRONMENT VARIABLE (If you however want to set environment variables.)
We can easily append the sdk platform-tools and tools folder to your systems environmental path variable directly from command line(cmd) by simply issuing one command and performing a system reboot:
Code:
SETX PATH "%PATH%;SDK_Install_Path\platform-tools;SDK_Install_Path\android-sdk-windows\tools" -m
Just replace the "SDK_Install_Path" in the above with the proper path of your SDK installation. Example: C:\android-sdk-windows
Many guides on internet say that it is to be done for making it easy for users and if you have some basic knowledge of Command Prompt,
you will know that to execute any application with command prompt, you first need to change the directory to the one where application is
placed. And to skip changing the directories every time you open CMD, you need to put that application is environment variable. Howeve, we will not do so.
6. Type cmd in the search bar. Copy cmd.exe from there. Go to the directory where you have installed android-sdk. Go to platform-tools folder. Paste cmd there, right click on it and in the settings, select Run as Administrator.
7. You are done. Now what to do in it?
ADB Commands
Type adb in command prompt. And several commands will show up on your screen. It is very difficult to analyse these all commands, so we will only talk about most used and important commands
Connect your device via USB cable
And open the CMD in platform-tools folder(Make a shortcut of it on desktop). And type the suitable commands
Code:
adb devices
Will show the list of devices attached to the PC andtheir serial numbers. If this shows up correctly on your PC, then it means that everything is fine for continuing.
Logcat
Code:
adb logcat
It will display the real time log of your device
Best time to do it is when your device boots up
Now, many users ask me how to copy the logcat and upload it from CMD
There are several methods:-
1. Right click on the Title Bar of Command Prompt. Hover the cursor over edit and select mark. Select all the things you want to copy and then click enter. All the things will be copied to clipboard.
2. This is the correct way of getting logcat saved.
Code:
adb logcat > logcat.txt
This command will create a logcat.txt document in platform-tools folder with the complete logcat of the device. Ofcourse you can type any name instead of logcat.txt
3. I prefer taking logcat this way as it neatly compiles logs of different time
Code:
adb logcat -v long > logcat.txt
This is a very nice way to get logcat.
Installing Apps
Code:
adb install %PATH OF APK%
This will install an app on your Android
For example, if my app AreeB.apk is in G:\ drive (G:\AreeB.apk)
Then I will type
Code:
adb install G:\AreeB.apk
Be sure your apk is not in a folder that has space in its name, else the command will break at space bar.
For eg:-
G:\Program Files\AreeB.apk
Note:
If you have spaces in path of apk, you can execute the command without breakage if you include the path inside quotes. (Thanks to etcman)
Eg:-
Code:
adb install "G:\Program Files\AreeB.apk"
Mounting
However, I never found any problem in tweaking with system files with adb, but some users said that they couldn't do it, so the problem was that their system partition was mounted as Read Only(R/O)
So, it is necessary now to tell how to mount system partition as Read Write(R/W)
Code:
adb remount
It is easiest way to do so, if it does not work then
There is another method that we will discuss in ADB Shell commands section
Pushing and Pulling
For pushing,
Type
Code:
adb push %PATH TO BE PUSHED% %PATH WHERE TO BE PUSHED%
Suppose I have an app named SystemUI.apk(PATH = G:\SystemUI.apk) which I want to push in /system/app/ on my android(or in other words, install an app as a system app). Then I would type
Code:
adb push G:\SystemUI.apk /system/app/
More examples
G:\Dance.txt file to be pushed in Dance folder in sdcard
Code:
adb push G:\Dance.txt /sdcard/Dance/
OR
Code:
adb push G:\Dance.txt /mnt/sdcard/Dance/
G:\Movies folder to be transferred in SDCARD in Videos Folder
Code:
adb push G:\Movies /sdcard/Videos/
G:\system\framework\framework-res.apk to be pushed in /system/framework/
Code:
adb push G:\system\framework\framework-res.apk /system/framework/
For pulling,
push command replaces with pull and paths are swapped
Code:
adb pull %PATH TO BE PULLED FROM% %PATH TO PLACE PULLED FILE%
Example,
All system apps are to be pulled to G:\ROM\system\app
Code:
adb pull /system/app G:\ROM\system\app\
build.prop to be extracted to desktop
Code:
adb pull /system/build.prop C:\Users\Areeb\Desktop\
However, if a folder is in platform-tools folder, you don't need to type full path
Suppose if I type
Code:
adb pull /system/ system
Then a folder named system will be created inside platform-tools with all the files in system in it
If a file is in platform-tools folder, then also no need to type full path
For example,
There is an app name DeskClock.apk in this folder then, to push it to /system/app, type
Code:
adb push DeskClock.apk /system/app/
ADB Shell Commands
This mode of adb allows you to execute linux shell commands from your PC
These commands can aldo be executed through the mobile using Terminal Emulator
To initiate shell mode
Type
Code:
adb shell
You will get an prompt like this
sh-3.2#
Now you are in shell mode
adb commands won't work here and a new set of commands will work here. But we will only go in a little detail here.
Assuming you are in adb shell mode, I will only type commands that will work on shell. Note:- These commands won't work if you type them alone on cmd. But, these command will directly work on your mobile's Terminal Emulator
As these commands can also work on mobile, I am going to tell you a way of taking logcat on mobile
Type
Code:
logcat
You will see log of your device
To save this
Type
Code:
logcat > /sdcard/log.txt
A file named log.txt will be generated in sdcard
Uninstalling Applications
Code:
cd /data/app
This will change the directory to /data/app
Code:
ls
This will show the list of files in there
Suppose, there is an app named com.opera.browser (Opera Mobile) you want to uninstall it
Type
Code:
rm -r com.opera.browser
This will uninstall the app
Mounting Command:-
Code:
mount -o rw,remount /dev/block/mtdblock3 /system
Miscellanous commands:-
su: Initiates root request
du: Shows file foldrs and size
date: Shows todays date
ls: Shows list of directory
cd: Changes working directory
rm: Removes the file
logcat: Displays logcat
mount: Mounts the partition
busybox: Busybox Applets
Forgot next ones, will write later
All credits go to
iamareebjamal
For writing this up.

Need help

so i really need help rooting my htc one vx! im following the tutorial here http://forum.xda-developers.com/showthread.php?t=2203225 but the thing is when i enter recovery mode i get teh red triangle. how do i fix this? please help iv tried other methods but none have worked i really want to have my phone rooted.
To Root HTC One VX
LordXombie said:
so i really need help rooting my htc one vx! im following the tutorial here http://forum.xda-developers.com/showthread.php?t=2203225 but the thing is when i enter recovery mode i get teh red triangle. how do i fix this? please help iv tried other methods but none have worked i really want to have my phone rooted.
Click to expand...
Click to collapse
First Unlock Bootloader And Then Root. :silly:
i have unlocked the phone. but it will not allow me to access the bootloader unless threw other means. while in the bootloader it says tampered followed by unlocked. i cannot seem to figure out what is going on.
How to root htc one vx
HTC One VX comes from the
HTC One series of
smartphones consisting of
high-end specifications, such
as Dual-Core processors and
the latest version of Android
on-board. While we already
have a root guide for the
One VX, another root
method has popped-up on
XDA and to help users root
their devices with this new
method, here we’re
presenting a tutorial
explaining everything you
need to root your device.
So, let’s see how you can
root your HTC One VX
smartphone.
I. Before You Begin:
1. This will void the warranty
of the device. However, you
can reinstate it by unrooting
the device if there’s any
unrooting procedure
available.
2. The following procedure
works on Windows based
PCs only.
II. Downloading
Required Files:
download file. http://forum.xda-developers.com/showthread.php?t=2123359
III. Rooting the HTC
One VX:
1. Place the Root Package
archive on the Desktop of
your PC.
2. Extract files from the
archive to your Desktop.
Don’t launch any files just
yet.
3. Turn ON the USB
debugging option on your
device by heading to
Menu>>Settings>>Developer
options>>USB debugging .
4. Turn OFF the device.
5. Reboot the device into
Fastboot mode. To do so,
simply hold down the
Volume DOWN+Power
buttons together.
6. Once inside the Fastboot
mode, connect the device to
your PC using the USB cable.
7. Open a Command Prompt
Window on your Desktop. To
do that, hold down the Shift
button on your keyboard
and right-click on any empty
area on the screen, then
select Open command
window here .
8. Type in following
command into the Command
Prompt Window:
fastboot flash boot boot.img
9. Once it’s done, issue the
following command:
fastboot reboot
10. Your device will reboot.
Once it boots up, enter the
following command:
adb remount
11. Next, enter following
commands into the
Command Prompt Window
one-by-one. Press ENTER
after each line you type:
adb push Superuser.apk /system/app/
adb push su /system/xbin/
adb shell mkdir /system/bin/.ext
adb push .su /system/bin/.ext/
adb shell chmod 6755 /system/xbin/su
adb shell chmod 6755 /system/bin/.ext/.su
adb shell chmod 777 /system/bin/.ext
adb shell ln -s /system/xbin/su /system/bin/su
adb reboot
12. Your device will reboot
in normal mode.
13. Once it boots up, simply
open the Superuser app
from your App Drawer.
14. Tap the Update binaries
button in the app and let it
do the rest of the work.
15. And you’re all done!
Brilliant! Your device has
been successfully rooted and
the SU binaries have also
been updated. Now load-up
some root-only apps on
your device to realize the
power of root-access!

Categories

Resources