Develop Bugs

GPS (Co-Pilot) commands via bluetooth?

I have the O2 Orbit with Co-Pilot software that came with it. I connect the Orbit via bluetooth to the intercom system on my motorcycle. The phone connects automatically every time and I can receive calls as I ride, and listen to WMP (though I prefer to use my ipod).
I set the Co-pilot running the other day but none of the commands would come through the bluetooth connection into my helmet. Do I have a setting wrong or will this not work?
Thanks in advance.

You want btaudio installed to the unit IIRC, have a read of this thread where there is also a download for the plug in to enable the nav voices out through the headset - Mike
http://forum.xda-developers.com/showthread.php?t=306642&highlight=audio

mikealder said:
You want btaudio installed to the unit IIRC, have a read of this thread where there is also a download for the plug in to enable the nav voices out through the headset - Mike
http://forum.xda-developers.com/showthread.php?t=306642&highlight=audio
Click to expand...
Click to collapse
Thanks mike.
I have installed it but it doesn't seem to route the audio through the bt to my helmet, but I'll try again later. Do I need to activate btaudio every time I want to use it or will it run automatically?
I couldn't find the 'plug' you mentioned above...

you need to turn the app on if you go to the bluetooth menu and while the helmet is turned on touch and hold the helmet bluetooth name and select set as bt audio if this is not present the use mikes method it all depends on wheather the helmets bluetooth is compatable with the artimis

Garneth said:
Thanks mike.
I have installed it but it doesn't seem to route the audio through the bt to my helmet, but I'll try again later. Do I need to activate btaudio every time I want to use it or will it run automatically?
I couldn't find the 'plug' you mentioned above...
Click to expand...
Click to collapse
Two ways to do this - get a bluetooth headset that supports A2DP streaming ( I have a Sony DR-BT30Q) then all audio comes through the headset.
Alternatively, use VJvolubilis (http://www.vijay555.com/?Releases:VJVolubilis) - you'll need to set up a shortcut to run it with -agon to stream all audio through your bluetooth device. It worked for me on a BMW car kit!

Thanks guys.
Alix, I'll try that when I get home. The b/t must be compatible as I can receive phone calls on the bike and listen to WMP.
TT, I have no choice but to keep the headset I have as it is part of the wired intercom system and is fitted into my helmet. The b/t connectivity comes through a dongle supplied by the intercom manufacturer and sits beneath the seat with the intercom controller. It works fine with some apps, but just not Co-Pilot.
Not sure what this means :
TangerineTractor said:
...you'll need to set up a shortcut to run it with -agon to stream all audio through your bluetooth device.
Click to expand...
Click to collapse
Thanks again.

[Q] Bluetooth Upgared / Fix

can anyone tell me if I can update the Bluetooth in my HTC Desire or have more profiles. the phone is branded o2 but can be rooted. I dont want to change anything else in the ROM just make the bluetooth connect automaticaly & reliably to the car.
There are newer software builds available but have no mention of updating bluetooth.
Ther are no OTA updates available.
Software Number is 2.14.207.1
Andriod 2.2
Thanks for any advice in advance.
Trampsdad

Can't you just pair the 2 devices together? I personally don't use Bluetooth so no idea on that aspect. Also, the software is so out of date because o2 cba to release and update. There are major updates since yours. It might be worth considering to root so then you can flash a newer ROM, or infact, you don't need to root and just use an RUU. With the newest software. No need to root it then and less chance of it mess up.
Hope this helps

I still have some strangeness with Bluetooth. From what I read there are some updates in Honeycomb and maybe gingerbread. But I don't have a feeling what you are looking for is in FroYo
Sent from my HTC Desire using XDA App

Well I have a Kenwood Headunit with Bluetooth and the connection to that using stock Froyo and LeeDroid showed some interesting results. Gaps in the phonebook for instance. However, putting a 2.3 ROM (Ginger Villain) sorted that out, its fine now.
Bluetooth depends on the other device too.

What exactly is the problem you are having?
What Car do you have?
What Bluetooth system is installed (is it standard)?
I have used my desire in a number of cars (Vauxhall, Ford, BMW) without any isses with pairing, using the Phonebook,etc. is a different matter.

Personally, I have just received a new BMW 528i, and it doesn't get on well with my Desire at all.
It pairs OK and can use both the phone and music, but when I leave and return to the car, it just refuses to auto-connect again, and I have to go through the pairing procedure again.
Oh, except one - the time I went back to the garage to 'complain' about it and ask for advice, when it worked perfectly. Until I got home again!
Have experimented with my old Nokia N85, and that works fine, too. So it's either the Desire or an incompatibility between it and the car.
Oh, my Desire is running MCR r9 (FroYo) at the moment. Are there known issues with this? Info on any Bluetooth updates I could apply would be gratefully received!

i have to enter my pairing code every time i connect my bt headset - i took this to be a quirk for the moment - hoping its fixed in 2.2.2/2.3.x etc.

Lothaen said:
i have to enter my pairing code every time i connect my bt headset - i took this to be a quirk for the moment - hoping its fixed in 2.2.2/2.3.x etc.
Click to expand...
Click to collapse
Im having this same problem also with a Pioneer Head Unit in my car.
Bluetooth has always been troublesome as it doesn't auto connect. It will connect if I either manually click on "Pioneer Head Unit" or turn Bluetooth off and on (which I automate with tasker).
The pin thing is new and happens with all roms I have tried except LeeDroid, (which I prefer not to use as I don't like sense much). Leedroid still has the auto connect problem.

daveaus said:
Bluetooth has always been troublesome as it doesn't auto connect. It will connect if I either manually click on "Pioneer Head Unit" or turn Bluetooth off and on (which I automate with tasker).
Click to expand...
Click to collapse
Some good hints there - thanks!
I can connect far more reliably if I initiate the connection from the phone than from the car.
Likewise, if BT is switched off on the phone and then turned on after the car is on, then it sometimes works, too. Certainly don't need to re-pair anywhere near as often.
Can I ask how you use Tasker to automate the BT switching? I've not used that (I use Setting Profiles instead which I understand does roughly the same thing), so am curious what kind of rule you have that's useful for this.
Cheers.

TheMegaMan_ said:
Can I ask how you use Tasker to automate the BT switching? I've not used that (I use Setting Profiles instead which I understand does roughly the same thing), so am curious what kind of rule you have that's useful for this.
Click to expand...
Click to collapse
I use the following rules:
On wifi connection turn off bluetooth
On wifi disconnection wait 30 seconds and turn bluetooth on.
If not wifi connected & not bluetooth connected turn bluetooth off and on every 5 minutes.
If not wifi connected & not bluetooth connected and incoming call turn bluetooth off and on.
If not wifi connected & not bluetooth connected when display switched on turn bluetooth off and on.
The battery drain hasn't been a problem, if I go away or won't be using my car for a while I disable tasker. Of course this doesn't help when it keeps asking for the pin.

daveaus said:
I use the following rules:
Click to expand...
Click to collapse
Ah, cunning! Of course...toggle it when it's not already connected. Prifile Settings doesn't seem to let me toggle things like BT directly, although I could probably do so by setting some appropriate profiles.
I'll have to experiment...or just buy Tasker, instead!
daveaus said:
Of course this doesn't help when it keeps asking for the pin.
Click to expand...
Click to collapse
True, but so far in my case, I've only had that when I've tried to initiate connection from the car. Hopefully your trick will mean I don't need to do that so often.

Anyone found a gingerbread rom (or any rom!) with improved Bluetooth?

I have found the bluetooth to be terrible on the desire. I have got about 3 devices that my phone just refuses to pair with.
Currently I am trying to get it to connect with an Elm 327 Obd scanner. No luck, it asks for a pin, then I enter the pin, but it immediately rejects it.
I have tried oxygen rom, leedroid, stock froyo, everything...
I also have a parrot hands free kit that does the same thing, asks for pin, then does nothing...
Something makes me think it might be the radio or something. Except that my phone DOES connect with my scala motorbike helmet... So frustrating
Sent from my HTC Desire using XDA App

[Q] Bluetooth Auto-Connect?

Quick question whether there is an app, mod, or even build.prop edit that would allow my Note II to automatically try to connect to my car's single din Kenwood KDC‑BT952HD. Only thing the head unit tries to do when connected is re-download contacts, but it turns on as soon as my car turns on and it'd be a lot faster if my Note automatically attempted to connect to the head unit instead of the bluetooth popup with listed devices, which I don't even have considering I'm running Whompasaurus V2.9. so if there's any way I could even get the pop up that'd be great too!

I use Tasker to turn on Bluetooth and connect to my earpiece. But I need a trigger and I need to turn on my earpiece. The trigger I use is activating my map app.
So without a trigger, I don't know how to do that.

I'm new to tasker and I'm not sure how to enable the auto-connect through tasker.

I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player

maybe I'm missing something here, so may suggestion by be complete off.
Maybe leaving BT tunred on your GN2 before you get in your car. Or turned it on before you get in the car. I'm assuming the ROM you're using has a BT toggle. The thinking is that your headunit will try to automatically connect to any paired BT devices. If so, the GN2 should automatically connect when the deck does it's search.
This works for me when I try connecting to Jawborn Big Jambox or Jawbone Era or other BT devices I have paired on my GN2. It may be worth nothing I'm on a deoxidized stock rom. But I this also worked when I ran AOSP roms on my Evo 4G such as CM.
If the headunit does not do a pair device search and connect when it turns on, then I would definitely try suggest above. I have no clue, and that's better than nothing.

no autoconnect on GN2
Once you had a BT connection with your car and leave it at the gas station e.g. it won't reconnect when you're back!
Sad, but since then I tried the mighty Tasker and similar apps, but was happy with the app called "Bluetooth Auto Connect".
You can define the simple trigger, when display on....
So whenever I get back into the car, I hit either the menu or start button, that's it. Without unlocking you are back connected.
The only other annoying thing that you might be able to fix with Tasker is, that right after the A2DP establishes the connection the player starts playing the last song, which I obviously don't want most of the time.
Also Play Pause Next etc over BT doesn't work too well on android.

I have a Alpine head unit and as long as my bt is on before I start the car everything syncs automatically.
Sent from my SPH-L900 using Tapatalk 2

Lord Sekhmet said:
I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player
Click to expand...
Click to collapse
That's interesting, I always wonder what exactly secure settings does, but this example helps.
Sent from my SPH-L900 using xda premium

1FstYOTA said:
I have a Alpine head unit and as long as my bt is on before I start the car everything syncs automatically.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I have a Kenwood Dnx6980, and my experience has been that once my phone has been setup to sync ... The Kenwood will talk to it automagically.
This is using AOSP or non stock roms. Ofc.
Sent from my SPH-L900 using Tapatalk 2

Tasker worked for me
Skripka said:
I have a Kenwood Dnx6980, and my experience has been that once my phone has been setup to sync ... The Kenwood will talk to it automagically.
This is using AOSP or non stock roms. Ofc.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Guys I have a Chinese brand double din...MobileVision...or something like that and using Tasker along with Bluetooth autoconnect worked for me. The posts above describe exactly how to set it up and it worked for me.

[email protected] said:
Guys I have a Chinese brand double din...MobileVision...or something like that and using Tasker along with Bluetooth autoconnect worked for me. The posts above describe exactly how to set it up and it worked for me.
Click to expand...
Click to collapse
Bluetooth autoconnect's main feature works for my xperia pro (turn on bluetooth, connect to your selected devices in automatic)
Bluetooth autoconnect's tasker plugin is not working for me. I can use it, sort off, but it does nothing. Like, "Press the button, but there was no reply!"

Well that is odd. I have a Pioneer unit and my phone connects to it as soon as it detects it in range. Even if I turn off BT and then power it on, the phone automatically connects to the head unit without any intervention on my part. Sounds like an issue with your stereo.

No stereo issue. On some of the touch wiz based roms bluetooth DOES NOT auto connect. On most (if not all) aosp roms bluetooth DOES auto connect. Currently on ma7 stock with root and it auto connects. When I was on whomp, jellybombed, and labrats
Sent from my SPH-L900 using Tapatalk 4 Beta

Bluetooth Connection
Hi Guys,
Im glad i found this thread, im wondering if anyone could help me out.
My scenario is, my bluetooth is connected to my car radio playing files. When a call comes in, i need it to disconnect from the car radio and connect to my bluetooth headset, all without turning off bluetooth ( preferable )
My possible solutions are:
1 ) By using automagic, ive managed to get alot done with this app, but this seems beyond it.
2 ) Getting automagic to start an application when a call comes in which will force bluetooth connection to a specific bluetooth device and disconnected from other devices.
Anyone got any suggestions?

devilshady said:
Hi Guys,
Im glad i found this thread, im wondering if anyone could help me out.
My scenario is, my bluetooth is connected to my car radio playing files. When a call comes in, i need it to disconnect from the car radio and connect to my bluetooth headset, all without turning off bluetooth ( preferable )
My possible solutions are:
1 ) By using automagic, ive managed to get alot done with this app, but this seems beyond it.
2 ) Getting automagic to start an application when a call comes in which will force bluetooth connection to a specific bluetooth device and disconnected from other devices.
Anyone got any suggestions?
Click to expand...
Click to collapse
not sure of your rom, but both TW and CM allow you to set whether each connection is Media or Phone. put your headset to phone and your car to media only. when you answer the phone the headset should take over.

Lord Sekhmet said:
I use Tasker to turn on Bluetooth and connect to my earpiece. But I need a trigger and I need to turn on my earpiece. The trigger I use is activating my map app.
So without a trigger, I don't know how to do that.
Click to expand...
Click to collapse
Could you share how you did this? I am completely confused by the interface.
I am wanting the same setup but also for music player and Pandora
I haven't found an example to follow that even comes close.
---------- Post added at 09:54 AM ---------- Previous post was at 09:43 AM ----------
Lord Sekhmet said:
I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player
Click to expand...
Click to collapse
That helps,
I was going task / setting / Bluetooth
Still not sure how to set the trigger however.
[EDIT]
The first few minutes of that video answered my questions.
Sorry, I partied late last night and still kinda loopy.
Sent from my Jedi MasterX Note 2

[Q] Bluetooth issues in a vehicle

Hi everyone,
Got my black Z1c yesterday, love it so far!
However, when I try to use it in my car (Audi A6 2008), I cannot place a call if it was initiated from the car's interface.
The phone connects to BT no probs and shows my car in the devices list as a headset. Incoming calls are reflected on the car's display, and connected to the speaker's/mic of the car. When I place a call from the phone itself - same deal, all works as expected. But when I use the car's controls to dial a number, the car's display shows "connecting", and nothing happens...
Tried to pair/unpair many times, no success. Tried other phones, like iPhone 5, Samsung Ativ S (WP8), Samsung Galaxy S4 Active, HTC One - all work seamlessly. My old Xperia Z was working fine, until I sold it to get the Z1c... I would never expect Z1c to behave like this...
Anyone has similar issues?

Yes mine is the same (ford sync)
Sent from my D5503 using XDA Premium 4 mobile app

Hoagi said:
Bluetooth is a wireless protocol for exchanging data over short distances from fixed and mobile devices, creating personal area networks.
There are two important parameters of Bluetooth devices - class and supported profiles.
"Class" signifies the distance at which a Bluetooth connection is possible. Most mobile devices are Class 2, which means they have a range of up to 10 m. Class 1 devices are rare and have a range of up to 100 feet.
A "profile" is a type of Bluetooth connection. The most common are the Headset (HSP) and Handsfree (HFP) profiles that enable the device to connect to a wireless headset or handsfree.
Some other profiles are OBEX (OBject EXchange) which allows transfer of files, contacts and events; A2DP, which adds support for streaming of stereo sound and AVRC, which allows remote control of playback.
Click to expand...
Click to collapse
... and the reason you have posted this is...?

Aung Thiha said:
try clear caches. All kinds of caches. When I say all kinds, I mean all caches that you can clean. Retry what you want to do. If it does not help, try factory reset and retry your bluetooth connection. if it still does not help, try flash firmware. I guess this is the solution you can count on.
Click to expand...
Click to collapse
Thanks, will try. The phone was just outta box when I was trying it in my car... The car was the first BT device it has ever been paired wtih...

Phone calls work fine on mine.
BUT while we're on the topic of vehicle BT, has anyone got working song info via bluetooth? I thought it was supposed to support avrcp 1.3, but in my car (2013 Ford SYNC) I still get no info about songs I'm listening to and also the voice commands for playing artists or albums don't work.
/Daniel

I use it with my new Golf and the phone functions works as expected but the song info does not show. But they never do with Android phones. My 5s works of course
Sent from my iPhone 5s using Tapatalk

easycure1974 said:
I use it with my new Golf and the phone functions works as expected but the song info does not show. But they never do with Android phones. My 5s works of course
Click to expand...
Click to collapse
In my Toyota Auris 2013 model song info always worked with Walkman app assuming you have tags filled out correctly.
I know there were some issues with tag info in Poweramp I prefer to use but they got that fixed recently. Advanced options to display song info on external BT device is just buried deep in app's settings though.

Everything works fantastic on my BMW F10 (2012) with Navigation Professional, Bluetooth Music with Song Info, Phone with contact pictures (! Didn't even know that was possible until I got the Z10c) and full Message Access Profile with historic E-Mail and SMS access.
The In-Car integration is the main reason why I am torn between iPhone 5s and Xperia Z1c.
The iPhone has the Advantage of "BMW Apps", which allow using Webradio, Facebook, RSS Feeds etc. through the Navigation, as well as iPod Control and Coverart Display.
The Z10 can't do those things, but it can do Bluetooth MAP which is rather important to me also. Webradio can of course be streamed via BT (and controlled on the phone).

help with bluetooth and car kit. please!!!

hey guys after all these years I'm finally back to Android.
I have the HTC One m8 with Verizon and so far I really like it. the only problem is I can't get the Bluetooth to work with my car. Its a 11 Mazda 3, what happens is when it ask for the password for the pairing I enter it (all zeros) after I push okay the car lose the connection and the phone says paired but my car dosent ask for a devise name. I hear there's a problem with this version of Android and Bluetooth into cars. is there like an app i can download or something I can do please someone help. I don't wanna go back to my iPhone

iNFiNiTY125 said:
hey guys after all these years I'm finally back to Android.
I have the HTC One m8 with Verizon and so far I really like it. the only problem is I can't get the Bluetooth to work with my car. Its a 11 Mazda 3, what happens is when it ask for the password for the pairing I enter it (all zeros) after I push okay the car lose the connection and the phone says paired but my car dosent ask for a devise name. I hear there's a problem with this version of Android and Bluetooth into cars. is there like an app i can download or something I can do please somt wanna go back to my iPhone
Click to expand...
Click to collapse
I don't have a Mazda, but have the Verizon M8 and have no issues pairing my phone for both calls and audio, regardless of whatever ROM I've tried. Your car is three years old, so I suspect the problem is there. I would take it into Mazda and see if there is a software update for their entertainment/bluetooth. Also, if you've paired up your phone to anything else previously (headphones, speaker, etc.) you might want to delete those pairings before trying to set it up again. If none of those things work, then you might be out of luck unless you want to upgrade your car stereo. There are many instances where certain devices/cars just don't work well together, but the M8 has the latest bluetooth release available. Good luck.

Thanks for the support and for helping find the Solution!
ebb said:
I don't have a Mazda, but have the Verizon M8 and have no issues pairing my phone for both calls and audio, regardless of whatever ROM I've tried. Your car is three years old, so I suspect the problem is there. I would take it into Mazda and see if there is a software update for their entertainment/bluetooth. Also, if you've paired up your phone to anything else previously (headphones, speaker, etc.) you might want to delete those pairings before trying to set it up again. If none of those things work, then you might be out of luck unless you want to upgrade your car stereo. There are many instances where certain devices/cars just don't work well together, but the M8 has the latest bluetooth release available. Good luck.
Click to expand...
Click to collapse
Think you for your fast response, so I called up my dealership and they said they don't have any updates for my stereo.
But I did find a solution YAY!
1. keep one of the failed pairs in your phone
2. download "Bluetooth Connect and Play"
3. Here are the settings you want:
Bluetooth Receiver is [ON]
when this bluetooth device connects...
[*] Mazda
4. Click the 3 dots in the corner and click "Tweaks"
5. Heres what you want:
When trigger player
(*) Start player on basic bluetooth connect only
Seconds to wait 0
everything else unchecked
6. Make sure all other connections are deleted from your car and then set the car to pair while the code 0000 is on the screen go to your bluetooth settings and delete "Mazda" then click "Mazda" when it comes up enter 0000 and then bluetooth connect and play will come up and music will start playing
7. music will stop and it will ask you to name the device.. cool
8. enjoy wireless music