Sense on JIT - Hero, G2 Touch Android Development

i just want to say that i flashed the latest Cronos JIT patch over my re-packed Modaco rom by Behnaam ...
and i get a whopping 4.5 mflops on average with SenseUI at 650 mhz from Linpack...
WHOOOOOOHOOOOO...look mum... i can flyyyyyyyy
http://www.cronosproject.org/forum/viewtopic.php?f=23&t=89

Nothing new, see my post here:
http://forum.xda-developers.com/showthread.php?p=6830450#post6830450
But with JIT on is just perfect!
Ps how is your unlockscreen?

odin13 said:
i just want to say that i flashed the latest Cronos JIT patch over my re-packed Modaco rom by Behnaam ...
and i get a whopping 4.5 mflops on average with SenseUI at 650 mhz from Linpack...
WHOOOOOOHOOOOO...look mum... i can flyyyyyyyy
http://www.cronosproject.org/forum/viewtopic.php?f=23&t=89
Click to expand...
Click to collapse
What are the steps to install the Cronos update on the Sense enabled ROM. I tried it a few times - complete wipe (factory reset, dalvik cache etc) followed by the Cronos update. Wiped the Dalvik cache again and rebooted. However, it gets into a boot loop. I tried this with the Modaco repack and the turkey42 repack of the GSM ROM.

raajkay said:
What are the steps to install the Cronos update on the Sense enabled ROM. I tried it a few times - complete wipe (factory reset, dalvik cache etc) followed by the Cronos update. Wiped the Dalvik cache again and rebooted. However, it gets into a boot loop. I tried this with the Modaco repack and the turkey42 repack of the GSM ROM.
Click to expand...
Click to collapse
Why do you wipe anything when updating JIT? Where does it say you have to wipe anything?

Feeyo said:
Why do you wipe anything when updating JIT? Where does it say you have to wipe anything?
Click to expand...
Click to collapse
I wiped everything because I got into a boot loop when I didn't wipe. I have learned now that either way, it gets into a boot loop. Would you know why it happens?

raajkay said:
I wiped everything because I got into a boot loop when I didn't wipe. I have learned now that either way, it gets into a boot loop. Would you know why it happens?
Click to expand...
Click to collapse
Try editing the build.prop in system, change dalvik vm to a lower m.
About 32m

Hey Feeyo if your reading this, you might want to upload a NO JIT (just incase)
if you have not already done so.

Lennyuk said:
Hey Feeyo if your reading this, you might want to upload a NO JIT (just incase)
if you have not already done so.
Click to expand...
Click to collapse
I will add a JIT remover patch today.

Added an JIT disabler patch: http://www.cronosproject.org/forum/viewtopic.php?f=23&t=89
Enjoy.

Feeyo, out of curiosity and interest, i would like to know if there's actually any benefit in using your JIT instead of the one that was optionally found in Villain. As far as i know, Villain uses the JIT found in the Desire forums that works in Sense for those guys, and a change in build.prop for dalvik heapsize to 38mb.
Comparing the two files i see no differences in size (except for build.prop which differs slightly).
What are the changes you have done to this?
ps. not sure if the tone of my post is quite right, all i want is to learn if it's any better, or has a 'hero optimization" compared to that Desire JIT enabler. Thanks

i just flashed the Cronos patch over my rom and it works like a charm;
so far i encountered no problems, fc's or anything like that
i have the htc sense lockscreen and this doesn't conflict with the JIT patch from Feeyo
i'm very happy
just switched back to the Behnaam re-pack of the modaco rom because Cronos 1.7 with JIT enabled was draining my battery like a ********
now i have a superfast rom that gives me 30+ hours of battery life

petsasj said:
Feeyo, out of curiosity and interest, i would like to know if there's actually any benefit in using your JIT instead of the one that was optionally found in Villain. As far as i know, Villain uses the JIT found in the Desire forums that works in Sense for those guys, and a change in build.prop for dalvik heapsize to 38mb.
Comparing the two files i see no differences in size (except for build.prop which differs slightly).
What are the changes you have done to this?
ps. not sure if the tone of my post is quite right, all i want is to learn if it's any better, or has a 'hero optimization" compared to that Desire JIT enabler. Thanks
Click to expand...
Click to collapse
Feeyo's versions is based on an update of what Villain have used (see desire forums), it is not fully tested yet, some early reports are good but also some not so good.
It will need time to know if this is better or not.
JIT tends to work well for the first 12-24 hours anyway (no matter what you flash) its the period after where the testing really should start.

odin13 said:
i just flashed the Cronos patch over my rom and it works like a charm;
so far i encountered no problems, fc's or anything like that
i have the htc sense lockscreen and this doesn't conflict with the JIT patch from Feeyo
i'm very happy
just switched back to the Behnaam re-pack of the modaco rom because Cronos 1.7 with JIT enabled was draining my battery like a ********
now i have a superfast rom that gives me 30+ hours of battery life
Click to expand...
Click to collapse
I am not able to JIT enable the ROM with the Cronos patch. How did you go about the installation process?

raajkay said:
I am not able to JIT enable the ROM with the Cronos patch. How did you go about the installation process?
Click to expand...
Click to collapse
put the file on to the root of your sd card, boot into recovery dont wipe anything flash it as you would a ROM if you bootloop download the other update for bootloop if flash it if you have problems flash the JIT Disabler

VillainROM 10.0?
Has anyone tried to use this with VR10.0?

Read this first,
http://forum.xda-developers.com/showthread.php?t=684535
JIT files of Cronos is same with gr0gmint's r2 files. But he was reverted to old version.

This is awesome! Great work Feeyo, keep it up!

wuotr said:
Has anyone tried to use this with VR10.0?
Click to expand...
Click to collapse
Team Villain has their own version

so .. after about 1 day i have had two sudden reboots...
first the phone hangs for a couple of secs and then it instantly reboots
i dunno whether it is the combination of JIT with some programs or the Sense UI
but i'll report back in a couple of days ..

odin13 said:
so .. after about 1 day i have had two sudden reboots...
first the phone hangs for a couple of secs and then it instantly reboots
i dunno whether it is the combination of JIT with some programs or the Sense UI
but i'll report back in a couple of days ..
Click to expand...
Click to collapse
yes, it's unstable

Related

Run your Hero at 660mhz

Beta testing of a new kernel that allows over clocking up to 660mhz. I have no time to do a lot of testing. So far MCR rom 3.2 is stable and fast with it. So I am calling for testers. The kernels are using ramzswap.
Download
Note: It will not work on 2.x rom as it is a 2.6.27 kernel.
This is great news. I would try it, but I have a CDMA Hero.
I think this also works for 2.1 ROM; I'm using Vanillain 1.0 and I went from 145 CPU benchmark to 154...
how to apply?
and does setcpu support this setting yet?
thanks for the work
1) Download the SetCPU in the link
2) Drag the SetCPU file into your SD card
3) Open and install using any file manager (I use Astro)
4) Download the setcpu.txt file into your SD card (not into a folder)
5) Open SetCPU and press Menu > Device Selection > Scroll all the way down to "Custom Frequency Config" (last on the list)
6) Then set up the frequency as you desire
is this based on teknologist's kernel? this shall be included in MCR once stable enough.
Is root needed?
Yes you need root for this to work, and just on a side notice using the overclock widget seems to work to.
worked on my hero i guess.. but how stupid m i, i tried edit the txt file and push into my nexus and try the settings... damm.. f*ck, it did not work at all... damm...
doesn't do anything for me according to linpack. Same amount of Mflops/s
edit: and screen went black and never got out of it.... :S
660 MHz ?? Bye bye batery...
Myriad Group is developing a new virtual machine for android that increases 3x the speed of the system running aplications, with the same hardware, and a optimized use of the batery and will allow richer grafics... The name of the project is Dalvik turbo and it will be show on the Mobile World Congress of Barcelona...
You can read it here: www(dot)mobileburn.com/news.jsp?Id=8684
I hope we can use it to our Hero's ...
Dalvik Turbo looks extremely promising. If 3x performance can actually be achieved, then we have to ask Google... what were you thinking with Dalvik's original design?
Please, read this:
http://android.modaco.com/index.php?s=&showtopic=302182&view=findpost&p=1185063
What do these numbers mean?
Sergio PC said:
Seems to be working fine, you can tell in various instances such as scrolling in menus etc...
Lox_Dev you the man! thanks.
Click to expand...
Click to collapse
BogoMips is not the clock!
It's the efficiency of running a bootonly calibration loop.
This doesn't mean that Lox_Dev work isn't a great thing, though.
so in a nutshell, whith this mod does hero run faster or not?
ermacwins said:
so in a nutshell, whith this mod does hero run faster or not?
Click to expand...
Click to collapse
I don't think so.
Just because your car shows 200mph in the speedometer doesn't mean it can go that fast.
Really, read here: http://android.modaco.com/index.php?s=&showtopic=302182&view=findpost&p=1185063
Uqbar said:
BogoMips is not the clock!
It's the efficiency of running a bootonly calibration loop.
This doesn't mean that Lox_Dev work isn't a great thing, though.
Click to expand...
Click to collapse
Alright i understand ill edit that post to find some explanations.
Thanks man.
Hello I'm flash that kernel and after reboob i see circle showing droid logo => htc =>droid and that replay again and again some clue ?
After a backup I usually wipe everything out before installing a new rom.
Try this.

[Kernel] .29 Alpha for Cyanogenmod 5 Based ROMs 【aHero】 - For the Impatient

[Kernel] .29 Alpha for Cyanogenmod 5 Based ROMs 【aHero】 - For the Impatient
Here's a quick and dirty kernel compile with bluetooth and SetCPU OC both working for this ROM (and any Cyanogenmod based Hero ROM really). Should not be overclocking on boot.
Uses koush anykernel format to make it compatible for any CM based ROM.
I don't plan to update this. I had no intentions of making a Hero kernel so I probably wont be updating this. It was kind of an accident. I don't even have a GSM Hero. Anyways flash and enjoy! Devs can take what I did on my .config and make it good. There's some weird stuff in it.
If this eats your phone please do not hunt me down.
jaymac407 said:
Boots, testing more now..
Update: Wifi works, bluetooth works, OC seems to work (I THINK)
Good work.
Click to expand...
Click to collapse
I copied the netfilter options too. If someone can try to see if Wifi-tether works that would be awesome.
So apparently my kernel boots this aHero and fixes bluetooth. It's a .29 kernel based on the new source code.
Mind you that I might be missing some things. I took around 20 minutes comparing the existing .config and making one that is more similar to the Cyanogenmod .config by eyeballing differences and copying pasting code (yes really). I got really lazy toward the end because the .config was so damn long.
I at least enabled squashfs so the .sqf files decompress for sure now. Set localversion to cyanogenmod. You can see what I did to it in the download link as well, where I have a pastebin of what I did before I disabled perflock.
I also disabled a crap load of debug options that were enabled for some reason.
credits:
cyanogen for CM5. Based .config off his ROM
toastcfh for the kernel source code and being the father of all MSM7K overclocks
koush anykernel
.config here:
http://forum.xda-developers.com/showpost.php?p=6548814&postcount=53
how do i use this on ahero ? just flash it over the rom ?
Is this applicable to VanillaEclair?
Just flash this zip over my aHero?
Re: [Kernel] .29 Beta for Cyanogenmod 5 Based ROMs 【aHero】 - For the Impatient
Dont work for me om cyanogen mod, runs so slow it freezes. Cant get in set cpu and look
Sent from my HTC Hero using Tapatalk
going to test this now. I will update.
it sseems to freeze at boot (aHero 1.0 with JIT)
mine freeze at hero screen
Does it need a wipe and reflash first, or should it be ok to try over current CM ROM ( Vanillain 3.0 test version) ?
furrypotato said:
Does it need a wipe and reflash first, or should it be ok to try over current CM ROM ( Vanillain 3.0 test version) ?
Click to expand...
Click to collapse
There specific patches for the villain roms, theres one for Vanillain 3. There is a thread with them on xda
I tired it on Vanillian but cant seem to get past the lockscreen
I downloaded toastcfh's kernel source, but I didn't have time to compile..
anyway thanks for compiling, and I'll test it and report back soon..
Demologic said:
There specific patches for the villain roms, theres one for Vanillain 3. There is a thread with them on xda
I tired it on Vanillian but cant seem to get past the lockscreen
Click to expand...
Click to collapse
And me. Best wait I guess for a fix later.
Heh, awesome.
Be advised that this sometimes freezes randomly, that's the only bug I can see so far. Especially during going from and to sleep. That's the only issue that needs to be resolved. Apart from that, everything seems to work.
jaymac407 said:
Heh, awesome.
Be advised that this sometimes freezes randomly, that's the only bug I can see so far. Especially during going from and to sleep. That's the only issue that needs to be resolved. Apart from that, everything seems to work.
Click to expand...
Click to collapse
Try in setcpu to make the governor performance, if not msm7k
the ondemand governor code was broked in HTC source in .27
can i download the zip and flash it on ahero 1.0????
xaueious said:
Try in setcpu to make the governor performance, if not msm7k
the ondemand governor code was broked in HTC source in .27
Click to expand...
Click to collapse
Only options are performance and ondemand. Neither option seems to help with the crashes.
i have downloaded the zip on first page and flash over ahero 1.0 without JIT my phone boots and come to lockscreen and then i cant anything

[ROM] 29 June '10 - VillainROM 11.9.1 TEST RELEASE WWE 2.1 by TeamVillain

VillainROM 11.9.1 based on HTC OTA update WWE 2.1.
Fully deodexed beta test pre VR12.0 release
Why VillainROM11.9.1? It means if stuff breaks, tell us and we'll fix it, and the result will be the final VillainROM12 release.
What works:
Livewallpapers (not with sense)
Gallery 3D (With Picasa sync)
Voice Search
Voice Dial
Desire lockscreen
Dalvik2cache by default
Automatic apps2sd, just create an ext partition on SD card and we do the rest.
Recovery ROM patched to wipe dalvik on /cache with wipe dalvik
Everything else
What doesn't work:
Friendstream
What has been added:
19MHz to 748MHz OC kernel
Multi language support (even Greek works!)
Wifi tethering (aNetShare)
USB tethering
compcache enabled and tweaked
low memory management tweaked. NO NEED FOR AUTOKILLER.
cpufreq values set for balanced battery power/cpu performance
Latest busybox
Bash 4.1 (type "exec bash" once you're adb shelled in)
Updated APNs list
Cleaned up kernel CPU frequency table for less battery intensive speed switching
Rosie config screen added (2010-07-01)
Latest Google Maps as of time of release
How to install:
Backup/restore
Nandroid Backup
Wipe
Wipe data
Wipe dalvik cache
Wipe SD:Ext (If you have apps2sd and/or an ext partition)
Flash
Flash VillainROM11.9.1-Full-signed.zip
Reboot system now
A FULL WIPE IS AN ABSOLUTE MUST. DO NOT POST SUPPORT REQUESTS WITHOUT DOING THIS.
Download Here
(Refresh the page to get another mirror)
Code:
md5: 8fbeb43c7d5cf970c1669b2e833c9fa0
Thanks to netarchy for scripting help, kendon with patching the stock ROM, DMzda and Lenny with alpha testing, arshad14, venter and Billias with beta testing. Thanks to AdamM for Rosie config.
Note: This ROM has been built from the OTAs, not from any /system/ dumps.
EDIT:
For Windows users struggling in the dark ages with their cmd prompts that don't understand colours:
Download this script:
http://qap.la/~ninpo/villain/testing/ll
Code:
adb remount
adb push ll /system/xbin/
adb shell chmod 755 /system/xbin/ll
adb shell chown 0:2000 /system/xbin/ll
Then give it a whirl:
Code:
adb shell ll /data/
It also accepts regular ls arguments:
Code:
adb shell ll -al /system/bin/
Enjoy!
For those wondering, Hacre is Ninpo on the VillainROM Forums.
dowmloading now, will try it straight away.
cheeeeeeeeeeeeeeeeeeeeeeeeeeeeers
Oh happy day, thanks for the hard work. I can't wait to test this when I get home.
Link coming soon - how you downloading
Sent from my HTC Hero using XDA App
may I ask, why would this be any different from vr 10.3? they're both build from official 2.1 roms for the gsm hero. one is from europe, the other, asia. ok, same phone still.
Is it like the VR team has learned a few things from vr10 and are doing things differently in vr12 so this will be a better rom than vr10?
because vr10 is supposed to be the ultimate sense rom, no?
how can this be any better? I read the "Added" list above, sure there are some interesting things, but don't all of those things work in vr10.3? as well? maybe the cpu won't change speeds as often now, but in all honesty, will this work any differently than 10.3 did?
I finally left VR after vr10.x because I'm tired of the slowdowns in sense roms. villain superhero2 is much better to me, but oddly has some broken things (considering it's from the same rom I don't quite get it, but hell I'm not the one building the rom so I'm just happy you guys do all this hard work!
But what I really want is a sense rom where I can use whatever launcher I want (I love launcherpro right now) without having to move to a non-sense or almost-non-nense (IE: superhero) rom just to get the speed I need.
will this happen with VR12? or for pure speed is it still better to go with non-sense or partial-sense?
so many questions, sorry, rambling, but I'm confused about the big deal about euro hero 2.1 rom versus asian one. the languages were added, keyboard was changed, so the taiwan rom became the euro rom, no?
silly questions maybe? did I miss something LoL
cheers, thanks for indulging me. I'm su re I'm not the only one wondering this stuff.
rophaq said:
dowmloading now, will try it straight away.
cheeeeeeeeeeeeeeeeeeeeeeeeeeeeers
Click to expand...
Click to collapse
I'm curious what you think compared to superhero 2.0 (which I'm on right now).
try using launcherpro under 11 beta and see how it does compared to launcherpro under superhero 2 for example.
Anyone who grabbed this recently, please redownload if your md5sum does not match:
Code:
8fbeb43c7d5cf970c1669b2e833c9fa0
As there was a last minute fix required right as we went live, lol typical.
To address some questions, especially from dkelley:
This is a -fast- ROM. Fresh boots finish in 5-6 minutes, instead of the 10-15 most previous builds took. From power on to usable UI is under two minutes. It is smooth, it is fast, it is slick.
We've already had alpha and beta testers comparing it to Superhero and that's with Sense. Imagine LauncherPro...
We didn't just go from 10.3 and everything prior to that with some fixes. This is built from the base HTC ROM+OTA updates with further optimisations and fixes applied ourselves.
Apart from the additional European language support, we would not release a ROM if we didn't feel it to be an improvement over what we already have available. That's what 11.9.x is here, for you to help us test, report back bugs, so that VR12 can be the best ROM we've ever released.
dkelley said:
I'm curious what you think compared to superhero 2.0 (which I'm on right now).
try using launcherpro under 11 beta and see how it does compared to launcherpro under superhero 2 for example.
Click to expand...
Click to collapse
Also wondering the differences. +1
and....
Just go to the Application in the Setting,and clear the Sense"Default".
Then you can set LauncherPro(or what ever other Launcher)as your default launcher in any ROM.
just waiting for it to boot now.
will report when it's ready
Again please make sure your update zip matches the md5sum
Code:
8fbeb43c7d5cf970c1669b2e833c9fa0
as we had to make a last minute fix shortly after announcement.
came from super hero were everything worked including apps2sd..... wiped everything flashed but apps2sd not working automatic do you need to run the apps2sd.zip with this rom?
chrisjaggeruk said:
came from super hero were everything worked including apps2sd..... wiped everything flashed but apps2sd not working automatic do you need to run the apps2sd.zip with this rom?
Click to expand...
Click to collapse
are you sure it's not working? it takes a long time to copy thigns over to sd. when I do a titanium backup of 100+ apps after flashign a new rom it fills up app space pretty fast but after 10-20 minutes it lowers space down again in phone memory (not speaknig of 11.9 here but apps2sd in general)
chrisjaggeruk said:
came from super hero were everything worked including apps2sd..... wiped everything flashed but apps2sd not working automatic do you need to run the apps2sd.zip with this rom?
Click to expand...
Click to collapse
No you need to read earlier in the thread where I said to check md5sums. We had a problem with the release we initially went live with (missing /system/sd folder in dir structure) which broke apps2sd.
Please check the md5sum of your .zip, it should be 8fbeb43c7d5cf970c1669b2e833c9fa0
If it isn't, redownload and reflash.
Started off with about 145mb i think. now down to 119mb only installed about 6 things so far
Hacre said:
No you need to read earlier in the thread where I said to check md5sums. We had a problem with the release we initially went live with (missing /system/sd folder in dir structure) which broke apps2sd.
Please check the md5sum of your .zip, it should be 8fbeb43c7d5cf970c1669b2e833c9fa0
If it isn't, redownload and reflash.
Click to expand...
Click to collapse
oops just seen your post will re download and try again mate cheers
so far so good, quick'n'smooth. everything is syncronised, hotmail, google acc,twitter, facebook, etc...plenty of memory left on the phone...amazing staff. a big thank you to all of you, job done
here are a few picks.
Hacre said:
No you need to read earlier in the thread where I said to check md5sums. We had a problem with the release we initially went live with (missing /system/sd folder in dir structure) which broke apps2sd.
Please check the md5sum of your .zip, it should be 8fbeb43c7d5cf970c1669b2e833c9fa0
If it isn't, redownload and reflash.
Click to expand...
Click to collapse
ah. well, there it is.
Is there a new radio out to flash with this rom? preferably one that works with a locked orange hero?
Cheers

[ROM] VillainROM 12.0.0 Final - WWE Android 2.1 by TeamVillain

VillainROM 12.0.0 based on HTC OTA update WWE 2.1.
Deodexed.
What works:
Livewallpapers (enable in Rosie config)
Gallery 3D (With Picasa sync)
Voice Search
Voice Dial
Desire lockscreen
Dalvik2cache by default
Automatic apps2sd, just create an ext partition on SD card and we do the rest.
Recovery ROM patched to wipe dalvik on /cache with wipe dalvik
Everything else
What isn't included:
Eclair Lockscreen
What has been added:
19MHz to 748MHz OC kernel
Multi language support (even Greek works!)
Wifi tethering (aNetShare)
USB tethering
AndChat IRC Client (Thanks to the author for permission)
Genie News Widget
compcache enabled and tweaked
low memory management tweaked. NO NEED FOR AUTOKILLER.
cpufreq values set for balanced battery power/cpu performance
Latest busybox
Bash 4.1 (type "exec bash" once you're adb shelled in)
Updated APNs list
Cleaned up kernel CPU frequency table for less battery intensive speed switching
Modification to the Amon Ra Recovery tool to facilitate proper wiping of Dalvik on /cache.
Latest Google Maps as of time of release
How to install:
Backup/restore
Nandroid Backup
Wipe
Wipe data
Wipe dalvik cache
Wipe SD:Ext (If you have apps2sd and/or an ext partition)
Flash
Flash VillainROM12.0.0-Full-signed.zip
Reboot system now
A FULL WIPE IS AN ABSOLUTE MUST. DO NOT POST SUPPORT REQUESTS WITHOUT DOING THIS.
By all means try flashing with just a dalvik wipe, but if you have problems, wipe first and re flash.
Download here
Code:
md5:061b3a43d4c05e4fdb61ebd206a408e5
Thanks to netarchy for scripting help, kendon with patching the stock ROM, DMzda, Revoked and AdamM with extensive testing and fixes, thanks to everyone who downloaded and installed VR11.9.1 and reported all the issues they found.
Note: This ROM has been built from the OTAs, not from any /system/ dumps.
Enjoy!
1st
Woohoo awesome! I'm number one! Downloading now!
Great news.
Presumably, like the previous test release, this is also de-Odexed?
trip hazard said:
Great news.
Presumably, like the previous test release, this is also de-Odexed?
Click to expand...
Click to collapse
Correct, good catch, I edited the OP.
testing it now, and thumbs up
Is anyone trying this rom ? Hello where are you people !
VillainROM 11 has been working flawlessly for me all day with significantly greater battery life than 10, and any other 2.1 ROM for that matter! Hoping this is will be my last flash for some time.
Flashed after dalvik wipe from 11, add all seems well. Are there any changes from 11
Sent from my HTC Hero using XDA App
Just to say like the boot screen, is it possible to get the progress bar on a normal boot, not just first boot?
Sent from my HTC Hero using XDA App
UbuntuBhoy said:
Flashed after dalvik wipe from 11, add all seems well. Are there any changes from 11
Sent from my HTC Hero using XDA App
Click to expand...
Click to collapse
Lots of stuff in the OP that wasn't in 11. Livewallpapers, Rosie config, Friendstream, News widget fixed, etc.
Great work as usual! Downloading now.
And one more to say that after a dalvik wipe from 11.9.1 everything is fast and stable.
First ROM (besides your test release) that im 110% satisfied with.
All connections work, WIFI, 3G with GPS and navigator, no problems at all.
Thank-you for your hard work.
Sent from my HTC Hero using Tapatalk
this rom is spot on, fast and stable, big thanks & congratz on a fine rom
INCREDIBLY long boot time, just completely wiped + reflashed as I think it was bootlooping... never had this before on a ROM.
This is the final rom until froyo ones. No more flashes backups etc.. GOOD WORK SUPERB rom. Thank you so much !
Edit :Much much faster without ocerclock widget , and supports Turkish ! ( with morelocale)
Thanks guys for this great rom!
Seems to have everything I want from a rom! I have removed the apps you included (personal choice), but have left things like FriendStream and all the generic Android/HTC Apps.
Seems very fast and stable so far.
Good stuff!
Oh and Dalvik to Cache, hehe, thanks! Love the amount of free ram!
so far so sweet......thanks......
faster than all the previous ones, nice and clean, boot time under 1mn
bootscreen impressive, plenty of memory left, 3.249mflpos. cpu:749
good work. credit goes to all the team,thumbs up.
cheers
rophaq said:
faster than all the previous ones, nice and clean, boot time under 1mn
bootscreen impressive, plenty of memory left, 3.249mflpos. cpu:749
good work. credit goes to all the team,thumbs up.
cheers
Click to expand...
Click to collapse
Your signature is wrong!
should i use setcpu?
because if i use setcpu it reboots allone on 710Mhz
but if i don't use, i have 2.7mflpos

[17 DEC][ROM] DHD Dungphp 1.6 - Tweakers by Vis [Tweaks+ZRAM+Swap+Data2SD] DMKern2.8

ROM Base by Dungphp RUU Desire HD 3.06.405.1, 3.12.405.1 - With sense 3.0 - Android 2.3.5 Tweakers Edition by Visentinel With STABLE DATA2SD by Sibere
****Pay attention to the install procedure****
Reason for ROM
All tweaked out, and virtually unlimited space thanks to siberes DATA2SD made for Desire roms. ZRAM by Dorimanx and Kernel 2.8 by Dorimanx. Dungphp's sense 3 rom is the best sense rom in town and then i came along and made it even better
Tweaks Feature List
Tweaked IO
- NOOP IO Scheduler set to defualt
- 512 IO Cache
-You can change the above with system tuner set at boot with init.d
Tweaked Ram Management
- Latest Legendary Dorimanx's ZRAM Script
- Automatically mounts mmcblk0p3 for sd-based swap
Stripped Sense 3, just the awesome Sense UI
- Sense 3 Stripped of all useless HTC stock apps + libs (Basically Everything)
- Stripped all downloadable GAPPS
- Launcher Pro is Default, There is no Rosie (Doesn't work after stripping HTC Apps) Install any launcher you prefer
All of Dungphp's rom features...
Working:
- Phone, Sound, Camera, Camcorder, GPS, Data, Wifi, bluetooth ...
- Mount, USB Disk, Gallery, 720p videos, Flash with video, sound streaming ...
Bugs:
- Graphical Glitches - Dont try to fix it, aint as bad as anyone thinks... you can live with it ! - or try and flash a .35 kernel, but performance goes down... is it worth it ?
- Sense Customization settings closes without launching the customization app
INSTALL PROCEDURE
MAGLDR partition sizes - Use Last 24mb NAND - 5/330/10
Install the rom as normal with CWM
Reboot and wait for the rom to finish first boot and complete the HTC wizard, wait a couple of minutes at the launcherpro desktop, you may config wifi and some settings but DO NOT add any accounts to accounts and sync.
Reboot
Flash the Data2SD in CWM
Reboot
Install Superuser from the market
I had to strip "everything" I could to get this rom to boot with enough NAND data space to function before rebooting again to install data2sd. I had 22mb data space left on my first boot.
Enjoy
Download - You Need Both
Download the Rom
Download the Data2SD
Screenshots
Attached to thread.
Introducing the...
FutureLog
17 - dec
Fix the "Customize" in settings. One of the HTC Apps was responsible for that
Maybe a Sense 3.5 release but there isn't much difference between 3 and 3.5 for the purposes of this ROM, also I could not shrink a sense 3.5 rom enough for first boot so..
A. I need time to experiment with more stripping ideas
B. Learn how to integrate Siberes Data2SD
C. Figure out why removing the A2SD+ from the sense 3.5 runny roms released here completely breaks them.
ChangleLog
Future 1.2 - Released as CWM update to 1.1
Better Zram Settings - Attached to this post is an updated 02zram. Flash in CWM.
New 2.9 kernel by dorimanx attached - fixes a bluetooth bug.
1.1
First released version
update kernel to dorimanxs 2.8
update zram to new version
1.0
First Version - tested for 48 hours
Benchmark
Avg NAND Speed = 27200.392 KB/s<=> 26.563 MB/s
Test file in /data/data wich is on sdext by data2sd.
I/O Schedulers and devices Tester by iamcxa
seems a great rom be cooked!
kill the rosie.apk and take out the htc screen is a good idea to make the speed up for performance , i did that for my test build ... it's fast and faster.
iamcxa said:
seems a great rom be cooked!
kill the rosie.apk and take out the htc screen is a good idea to make the speed up for performance , i did that for my test build ... it's fast and faster.
Click to expand...
Click to collapse
Thanks Mate i was nervous about what the first person was going to say you give me a smile.
Visentinel said:
Thanks Mate i was nervous about what the first person was going to say you give me a smile.
Click to expand...
Click to collapse
when i opened the thread i also nervous and especially
that is my first thread.
but be relaxed, i think this will be a stable and cool rom!
tank's bro,downloading now
Cool, you would be the first person other than me to use this rom
let me know how it goes asap, i want to be sure 330m system works, 315 worked for me but as you can see i have under 5mb left.
After you flash go to advanced and report errors, mount sdcard and check the cwm log and make sure all the minzips worked, to ensure you didint run out of system partition space.
And remember to enable use last 24 nand in magldr under services.
Graphic glitches...You're wrong. I can't live with that.
Sent from my HTC HD2 using Tapatalk
mzebrowski13 said:
Graphic glitches...You're wrong. I can't live with that.
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Lol your loss.
Sent from my Desire HD using Tapatalk
Visentinel said:
Lol your loss.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
well ,take out glitches but lose performance ... okay that's depending on users.
Visentinel said:
Lol your loss.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Well now you're right ... V
iamcxa said:
well ,take out glitches but lose performance ... okay that's depending on users.
Click to expand...
Click to collapse
The glitches are barely noticeable ! Don't u agree ?
Sent from my Desire HD using Tapatalk
Visentinel said:
The glitches are barely noticeable ! Don't u agree ?
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
yes but seems get problem in buffer, did you noticed this? if the animation is shorter then glitches doesn't display.
see: http://forum.xda-developers.com/showthread.php?t=1386684
iamcxa said:
yes but seems get problem in buffer, did you noticed this? if the animation is shorter then glitches doesn't display.
see: http://forum.xda-developers.com/showthread.php?t=1386684
Click to expand...
Click to collapse
So your thinking this could be fixed in a .32 kernel if someone could figure out why the .35 kernel fixes it by finding the missing part ?
I am simply hoping soon Dorimanx might dev a .35 kernel with his performance modifications, I think he just needs time.
Just an update on this rom, the latest zram script by Dorimanx is clashing with this roms oom settings, I am going to work on tweaking it. I will post an updated zram script for this ROM once I am satisfied with the settings.
-Update
2nd post has CWM flash zip with a better zram script.
Dorimanx Kernel 2.8 had a Bluetooth Bug, attached to 2nd post is updated 2.9 kernel.
can't test now, but thanks anyway for a new sense work for Hd2!
I suggest to update kernel to 2.9 in order to fix bt bug
I will test this rom next week
Visentinel said:
So your thinking this could be fixed in a .32 kernel if someone could figure out why the .35 kernel fixes it by finding the missing part ?
I am simply hoping soon Dorimanx might dev a .35 kernel with his performance modifications, I think he just needs time.
Just an update on this rom, the latest zram script by Dorimanx is clashing with this roms oom settings, I am going to work on tweaking it. I will post an updated zram script for this ROM once I am satisfied with the settings.
-Update
2nd post has CWM flash zip with a better zram script.
Dorimanx Kernel 2.8 had a Bluetooth Bug, attached to 2nd post is updated 2.9 kernel.
Click to expand...
Click to collapse
yes, that is what i want to say, I think that should has possible be fix. but if someday DM decide to coding .35 ... well, I thought we put it away temporary and try our best for cooking rom first, and if possible then we could try to fix and coding kernel together. because kernel builder not to many but have lot of chefs, so i thought maybe we should join to kernel part to find out the bugs.
iamcxa said:
yes, that is what i want to say, I think that should has possible be fix. but if someday DM decide to coding .35 ... well, I thought we put it away temporary and try our best for cooking rom first, and if possible then we could try to fix and coding kernel together. because kernel builder not to many but have lot of chefs, so i thought maybe we should join to kernel part to find out the bugs.
Click to expand...
Click to collapse
It's a good idea but atleast for me I know nothing of kernels, I can't even figure out how to compile a kernel lol, I have tried.
I will ask dorimanx if he is willing to assist in this tho, I will offer him my full support to test.
Sent from my Desire HD using Tapatalk
If anyone has any sod issues just let me know il make an update to stop loading sd based swap. Usually sd swap is the reason for it.
Posted from my tweaked DHD.

Categories

Resources