Develop Bugs

For All Those Who Stuck In The Boot Screen - Try Mamaich Method !!!

Before 1 month my UNIVERSAL stuck on boot screen and like every one I'll start to test everything - including TASK 28 command to return him back but without succsess. Before 2 days some one put a thread about formating DOC and I remembered that I was try to format my DOC and after few weeks my Universal was stuck so MAMAICH wrote this:
mamaich said:
if you can enter bootloader - use "task 28 55aa", this would restore DOC to its original layout.
If you cannot - contact service center.
Click to expand...
Click to collapse
After this .... gues what .... EVERYTHIG run back to normal again
I will repeat myself:
MAMAICH
IF SOME ONE SAY THAT YOU'RE NOT A GOD - HI LIES !!!
AFTER THIS EVERYTHING IS RUNING OK ON MY OLD UNIVERSAL!!!
Thank you very very very MUCH !!!
Thank you again !!!
Hope this work to most of you

Oh My God !!!!! My Jasjar Recovered !!!!!!!
Thanks Alot !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

where is this task28 55aa? cus im in the bootloader screen but i cant get anything else to work

Step by Step :
get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset)
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .
For task 28 55aa in mtty success , will show the message (attachment )
DONE .

i can only choose from COM1, COM2, and COM3, it doesnt find usb, and ive try reconnecting in

i find you must kill the wcescomm, wcesmgr and rapimgr exe's using task manager before you get the 'usb' option in mtty (kills activesync)

rite got a window come up in the progam
typed "task 28 55aa"
next line came as "USB>"
so is that it done? cus i aint seen anything else happen?

afaik, thats it
now reset back into the bootloader again and load a (whole, inc radio) ROM

stupid question here, but the update i installed earlier effed it up, so where can i get one that def works, and how do i install it on lol, im think

If you want to make sure it works i suggest getting the latest rom from your carrier (orange? - http://www1.orange.co.uk/business/download/m5000/M5000ruu.exe)
then you can upgrade (if you want to) to other, perhaps custom roms and a later radio ROM.

i got o2 rom im trying to install but it says it can only do it thru activesync, but that wont find my xda, any ideas how to bypass that?

thats because you killed activesync in the last process, start it again (from the start menu) and the upgrade should work

restarted my laptop and still activesync wont reckonise my xda, any other ideas? (its still boot loader mode, if i do a normal reset the screen just loads red and scrambled)

start the update process while in bootloader mode, you don't need activesync at all.

yeh i got the rom to install on it, went to soft restart it like it said, press 0 to conitinue, and wat a suprise a red, green and blue scrambled fuzzy screen, any ideas where to go now?

have you installed the rom yet? if not you need to reset it into bootloader mode (http://wiki.xda-developers.com/index.php?pagename=Universal_Resets) and then start the rom upgrade.

yeh i reset it in bootloader mode, and i installed the new rom from the o2 website, but it didnt work, so i need a rom that either puts it back to original 02 settings or rom that at least allows me to get a workin screen up again

what was wrong with the o2 one you had?

i went to sell my phone, so i wanted to clear the data permanently, but i thought id put an update on it to add to its features aswell, but the update effed it up big style, and now i cant sell a broken phone

someone add to wiki.

My FSC-n560 is bricked. Help please!

Hi!
I was using Newplow's WM6 038 ROM with my N560.
Yesterday I tried to write another ROM(WM6 038 with 8MB pagepool) but during update got an error.. It said it just failed.
Now my N560 is stuck on booting screen(people climbing mountain..)
I tried Warm, Cold, Hard reset but with no luck.
Even the power button doesn't work so I had to remove battery. When I insert battery it powers on by itself.
I can enter bootloader screen by pushing power+record button so I tried to copy rom image file to SD card but it doesn't work.
I tried two ROMs(OS_213U.nbf from Original WM5 ROM and Newplow's) and 3 SD Cards(2GB SD, 1GB MicroSD with Adopter, 16GB SDHC)
Is there any recovery tutorial in bootloader mode?
Help me please!
Sorry for my English.

Have you tried flashing a ROM through the computer rather than the memory card? Try going into bootloader and flashing that way rather than the card.

The pagepool ROM is meant for N560s that have been upgraded to 128Mb RAM... have you upgraded the internal RAM to 128Mb? If you have not, then this may have caused your problem.
I had this problem when flashing to 038 normal RAM (from 035). A hard reset reset to the normal start screen, but nothing worked. However, trying a new burn with the Loox flash tool restarted the process and it worked. I found the cure was to make sure you hard reset the N560 before doing a burn. It appears to be that you have to do this to release enough RAM for the burn program to reside and for "working" storage. You may not have done this.
I suggest you try simply re-running the flashtool with SD/SDHC cards removed, battery in place, on the cradle via your PC, even though it appears stuck. The signals coming from the USB link may wake up the bootloader routine in the N560?

Solved the problem! Thanks for your comments!
I asked same question in Newplow's guestbook and the person who made pagepool rom answered. I used MTTY to revive my pda.
What I did is in below post. need translation
http://4pda.ru/forum/index.php?showtopic=55274

Hi all,
I have the same problem. N560 is stick on the himalaya picture. I tried to falsh from WM5 to new rom for Wm6 and after installation the pda stuked. So I did a warm reset and now only the start picture is apperaing. Problem is that battery is down now.
Can someone give more info on the process followed to revive the PDA ? I just cannont read russian (may be Jinsu77 ?)
Many thanks for support in advance

same problem here please please please someone help us
the only thing i can do is the l c:\os_213u.nbf on mtty program and nothing else happend to the machine
sorry for my english

read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.

It was me asking on Newplow's guestbook.
In case you're using Vista, you need some trick to be able to rom update. Read below.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
And then you need to download MTTY (I used version 1.42, got it by googling) and follow below steps.
(used google translation from 4pda.ru)
------------------------------------------------------------
For rom update without ActiveSync.
1) take this set of extract, copy it to the folder with the firmware.
2) copy the file os_213u.nbf example in C: \
3) You press the button Recorder + food and poke in the hole reset (Recorder button and hold until you eat dolphins)
4) plug the device to a PC, the Task Manager, shooting process - wcescomm.exe
5) Run mtty, choose Port: USB, connect.
6) If mtty caused an error and shut down, simply restart mtty, if not typed commands, then repeat the procedure with paragraph 3.
7) in mtty command, enter: (first letter in kommande - a little l l от слова from the word L L oad)
> l l c:\os_213u.nbf c: \ os_213u.nbf
Since the end of the process will be an inscription about the error, remove the device from the PC.
9) Run rom update, zhmete "next", until you see dolphins.
10), plug the device to a PC and program.
---------------------------------------------------------------
Hope this helps you all

in advance sorry for my english
I am doing all the instructions carefully and the mtty show this
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,1A0F023Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
the pda shos the dolphins and the full blue bar
after without change anything i run the PocketLOOX5xxFlashTool that i have in the same folder with the :
EnterBootLoader.exe
OS_213U.nbf (originally rom)
RUUServer.dll
RUU.dll
and the only thing i can see is that the PocketLOOX5xxFlashTool is trying to find the pda without any luck
also the pda is stucked in the same screen with the dolphins and the blue bar
do you see any mistake in this procedure

Helppp!!! please

tuluba said:
Helppp!!! please
Click to expand...
Click to collapse
have you closed EVERY process of activesync before proceding with mtty?

I close the wcescomm.exe and the rapimgr.exe is there anything else?

The pocket LOOX 5xx FlashTool cant connect with the N560 and at the and says that Error"The language in this Flash Image update (ENGLISH) differs from that on your device()!" and i have always english rom exept maybe from the last rom "the killer" with the 128MB rom that i dont know if it is an english or something else because the device never opens to see

After flashing in MTTY(don't care about error messages), you need to unplug your n560 from PC. And then proceed romupdate until you see the dolphin picture. Now you plug n560 to PC and cilck next and wait for a while.. Hope it works!

I change the language of the rom and it works
thank very much all of you

At all they have Probs with flash from SD Card: only use a Card with 512MB! I think a Card greater then can't read by the Bootloader....

hey.
i am compeletly new here. I have the same with my n560. I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP

if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)

Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????

ChrisDo said:
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
Click to expand...
Click to collapse
You can usually get back to the boot loader if you do a hard reset. I am sure you know how, if not you will find it in the FSC CDROM manual that came with the device. Let us know if this works? I have got stuck at this point too, so I know it works..... hopefully!

I canoot start, i cannot repair ROM

Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.

Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!

I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.

Power+Camera+reset button with ur touch pen

sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?

OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!

exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734

manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!

Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.

problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx

slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life

i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english

WM 6.5 for T-Mobile MDA III

Hello,
if got the T-Mobile MDA III with WM6.0.
Now i want to update my ROM with WM 6.5, bit i only become the following error:
Your image has corrupted. please check your update utility.
Can anyone help me???
i hope you can help me.
thx
markus

try to re-download the rom and make sure you run a USPL first if it's your first upgrade. Search the forum if you need help

it dosn´t works
i´ve tried 5 different roms but no one works.
its the second upgrade on the fon.

Try a new update of SPL, files here= http://forum.xda-developers.com/showthread.php?t=311403
Download "ArtemisUSPL.zip"
1. Unzip
2. Connect your phone to computer, make sure activesync is enabled (green icon)
3. Run start_uspl.exe on your computer and wait until process finishes
4. The phone reboot.
When boot is done, you are CID unlock forever normally so you can flash all rom you want.
Then, You can flash now your rom, just run RUU from your rom folder and normally it's good.
If it always don't work, give us all the number show in your 1st screen when the phone boot (IPL, SPL ...)

yes, tell us what numbers you get on your screen
also what error are you getting
and what OS are you on....vista? XP ? Did you get an activesync connection before you tried flashing?
also try putting phone into bootloader mode first and then flashing, sometimes helps. (hold down RECORD/NOTES button when you reset)
once you've got an error number ( eg error 260 ) you can try searching the forum for that error number and see how everyone else has coped with it.

How to upgrade ROm with nbh file

As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).

The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.

thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted

stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .

You can download my ROMs, they come with the full package

trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help

stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...

stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?

Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP

Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.

strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?

Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.

From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.

thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading

stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )

Lol I can't belive I forgot to tell you that!

It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?

Thank you, here you go!

sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!

nevermind, it worked ok on the second attempt!