Develop Bugs

[27.05.2010 Neopeek][ANDROID Froyo + Eclair + Ion] ext2-filesystems - NoSquash

Hi all,
just wanted to let you know that i succeeded in putting Android on EXT2 of internal memory.
As I am also involved in Projects like MeeGo, Bada & Others you may contribute to this builds and help me making this builds better. I will post all Project updates here but as stated above I will more frequently visit my own website due to the other Projects. If you need urgent support in this builds you may leave me a message on my website.
Please have a look at my website if you are interested in contributing.
My Website: Contribute Android
UPDATE 27.05.2010: View original article: Android Froyo Eclair Ion Builds
Why moving to ext2 filesystem and leaving root-filesystem contained in squash / image files?
A squashed / imaged root filesystems had to be unsquashed til now if you ever wanted to make changes in them! Therefore all files could be placed directly into the root of your memory (commonyl FAT32).
ext2 is a linux-only filesystem and you will have to get some tricky tools to get it read in Windows. But in Linux you have now the possibility to write directly into files or even update the filesystem as you want. Possible scenarios are placing archives into it to update Android and so on.
We think that until now a lot of users had problems with the squash filesystem and expect to contribute more users to Android-Porting with ext2. Squashfstools won't be needed any more.
If you are an unexperienced user or don't know how to get a virtual system with Ubuntu running:
Don't hesitate to ask us in the communiyt for help. Now let's start:
Step 1: Partitioning your memory!
Please install Gparted in Ubuntu and partition your internal memory (Diamond) or SD-Card (other devices) as seen below in the screenshot (1 x Fat32, 1x ext2, 1x linux-swap):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 2: Extracting files onto ext2
* sudo umount /media/disk-1 /*Notice: this could also be something like /media/disk or /media/disk1223-dsf232 etc.! You have to locate the ext2 filesystem which you have partitioned above */
* sudo mkfs.ext2 /dev/sdb2
* sudo mkdir /media/neopeek
* sudo mount -t ext2 /dev/sdb2 /media/neopeek
* sudo tar -xzvf ~/Desktop/neopeek_android.tar.gz -C /media/neopeek /* Alternatively: Neopeek_Android_2.1.tar.gz oder Neopeek_Android_Froyo.tar.gz */
* sudo umount /media/neopeek
Step 3: Extracting files onto FAT32
Download HARET-Paket.zip including latest Kernel. Extract the contents directly onto the root of the FAT32-Partition. That'S it! Unplug your device / sd-card and run Android by executing "HARET.EXE".
Download Android Froyo Eclair Ion
So that's my birthday gift for myself and for you. If anyone wanna make me a gift then move to my site and register / connect to get the latest updates by mail before they appear here and to support my upcoming website!
[/B]
Thanks goes to: XDAndroid-Project, Balsat for the latest builds and many others. You know who you are!
Build notices: Based on XDAndroid's and Balsat's autobuild service for rootfs and kernel. Special thanks go to Balsat for introducing EXT2
Android Ion has buggy WiFi but runs like Myn's Donut!
Android 2.1 runs better for me on ext2. It's the XDAndroid build. On ext2 I can watch videos without stuttering. It's a little bit smoother for me. Test it out!
Android Froyo: This is for the freaks of you! Unproductive / Instable but worth a try hrhrhrrr!
Again i will state this here that it is clear for everyone: This builds are not mine cause I think some of you may think so. The build rootfs is made by Balsat but I have written an tutorial for you and republished builds so that you can get it working with EXT2. The HARET-Packet is modified by me as I couldn't find one from Balsat. Also I will provide you with support / help on how to partition your memory correctly. Especially windows users and beginners will need this support. In the next days / weeks I will port / cook further Android builds on my own and again this will be EXT2.
This thread is intended for introducing EXT2 for all of you who didn't know that it was possible. I either didn't knew it and no one informed me about this. Sure, I inform you!
For anyone having problems with partitioning: Try using fdisk command in console! This should look like this for your $GB internal memory or SD card with equal capacity:
sudo umount /dev/sdb1 or /dev/sdc1 (also sdb2 / 3 if exist)
sudo fdisk /dev/sdb
Press "d" to delete partitons
Select "1" (redo this if you already had mislucked tries with selecting "2" and "3")
Press "n" -> then "p" -> then "1" -> press "enter" -> type "600" or type "+1500M" -> press "enter"
Press "t" -> press "1" -> press "b" -> press "w"
Now you should have partitioned a FAT32 and can use GPARTED to create ext2 and linux-swap (notice: linux-swap-creation only needed for future builds and for testing. No need to create it if you don't wanna test)

Reserved for updates
Reserved....

reserved for updates Part2
Reserved2...

Looking forward to seeing it! I sense a wave of donuts coming...
Also, happy birthday!

Good luck. I hope this time we can have the android.
count on you.
respects

I hope so to,
Will this build have a good battery life so we can use it daily as OS?
Good luck and happy birthday!

good luck and happy birthday

Happy Birthday! We hope that the "diandroid" very fast and stable rom will!

Looking forward too it! And Happy Bday!!

very good man and happy birthday to you!!

do you have a link for your android 1.6? I am looking for a 1.6 w/ working wifi. not found yet. Thanks!

hao214 said:
do you have a link for your android 1.6? I am looking for a 1.6 w/ working wifi. not found yet. Thanks!
Click to expand...
Click to collapse
look arround, on all builds wifi is working, dont be so lazy
vatoloco haerzlichen glueckwunsch zum geburtstag
gruss

Happy Birthday to you.. Man this is best news I have heard in last one and half years !!!
Really looking forward to it. Will definitly test it for you even if its unstable

Can't wait to try your Android build =)

happy birthday

Happy birthday!..waiting for your release

There are already working android avaliable ? Like the one shown in above signature ?

Trying
Hey men...
Im trying your build but i cant synchronizing with my google account...
Anyone have the same issue?

which build are you trying??????????

suhas_sm said:
There are already working android avaliable ? Like the one shown in above signature ?
Click to expand...
Click to collapse
of course..there is XDANDROID,Myn's Warm Donut (the fastest bulid i saw),there is glossy android,Klinux's sense bulid and many other....you can find it in the raphael's android forum or in the blackstone's android forum or here

OpenRUU for Linux & Mac - NEW! Extract rom.zip from any RUU! BETA2

OpenRUU - RUU Shell Script For Linux & Mac
This is a shell script to flash an official RUU from HTC.
You do not need root.
Prerequisites:
Wine - Only needed to extract a rom from an RUU.
The script will:
NEW! Extract a rom.zip from an RUU & works on any device!
Get your current ROM version
Get Your Current HBOOT Version
Get Your Battery %
Reboot into RUU Mode
Flash the ROM using fastboot or NEW! Flash the rom in HBOOT without a PC!
Reboot your phone
Enjoy!
DOWNLOADS:
RUU Exract Version (beta) http://forum.xda-developers.com/attachment.php?attachmentid=350639&stc=1&d=1277632079]
If you can, please donate so I can afford better hosting, I also have some cool features to implement when I get proper hosting too. (If you can host a rom.zip, please PM me.)
Donate - GBP
Donate - Euro
Donate - Dollars
Post here with any bugs/comments so my turkeys can get to work!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Reserved for q&a

Reserved #2

Nice job! Well done

With beta2 I have cleaned up the fastboot scripts alot & general cleaning up of the scripts.

Is this the method for unrooting the HTC and return to stock roms? Like it is done when executing the ruu.exe in windows.

You should add a prerequisites section.
Not everybody has wine installed be default.

adwinp said:
You should add a prerequisites section.
Not everybody has wine installed be default.
Click to expand...
Click to collapse
Done.
10char

Just one question quickly. Say I extract the rom.zip from one of the official 2.1 RUU's - will it be flashable in such a way that I don't lose my custom recovery image? In other words, is the SPL removed?

MrPadie said:
Just one question quickly. Say I extract the rom.zip from one of the official 2.1 RUU's - will it be flashable in such a way that I don't lose my custom recovery image? In other words, is the SPL removed?
Click to expand...
Click to collapse
Nothing is removed or added, just the same as using an HTC ruu on windows.
Sent from Steve Job's Android Dungeon with my HTC Hero

I see. Just a heads up - wine for mac does not allow the RUU install to get past the initial loading screen. Wine error is:
Code:
fixme:storage:create_storagefile Storage share mode not implemented.
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library ARUGlobal.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe" failed, status c0000135

MrPadie said:
I see. Just a heads up - wine for mac does not allow the RUU install to get past the initial loading screen. Wine error is:
Code:
fixme:storage:create_storagefile Storage share mode not implemented.
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library ARUGlobal.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe" failed, status c0000135
Click to expand...
Click to collapse
That's normal if you are just seeing the loading screen. You have to hit enter on the script just before it dissapears. I'm working on a better solution.
Sent from Steve Job's Android Dungeon with my HTC Hero

Ah, I see. I already tried to hit enter at that point, and it didn't find it - must have not been copied over yet. However, at the same time, I manually watched the temporary directory as it was being created and I didn't see the rom.zip file appear, from start to finish. Has it worked for you on Mac yet? Never the less, I achieved what I wanted with Windows...one of the very little things I can achieve with it
Keep up the good work, really great script.
Mr P.

Hello,
I have a problem with OpenRUU explained on modaco forum
Edit : It's OK, goldcard issue
Thank

Will this work if the RUU is not working ?
Hi,
Will openRUU extract a rom form the RUU to work on my hero if the RUU is not working in the exe mode on windows and giving signature error (even with goldcard).
I have a stock rom 2.73.405.66 and a custom recovery ClockWokMod 2.0.1.3 and I have not been able to downgrade to 2.73.405.5 using the "RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe" file with the latest HTC sync running and 2 different goldcards. Always a signature error.
Will openRUU work using the same RUU exe and my hero ?
Thanks,
Sean.

42turkeys said:
Nothing is removed or added, just the same as using an HTC ruu on windows.
Sent from Steve Job's Android Dungeon with my HTC Hero
Click to expand...
Click to collapse
thx mate..

Sign of a noob: I thought I knew what I was doing
Okay, ran the script as directed. It fell down a couple of times, so I altered a line in 1extractrom.sh to point to scripts/linux/cptoworkingdir.sh instead of scripts/cptoworkingdir.sh, then added a trailing "/" to the adb-linux push line in scripts/linux/desire.sh, after which it progressed smoothly and worked fine.
The phone boots okay into fastboot, recovery and into the OS. At least, I assume it boots okay...it certainly makes all the right beeps and buzzes. I can't be sure it's working okay because.....the screen is completely blank.
Not a flicker of life. I know it boots okay into fastboot, because I can connect to it with fastboot on my Ubuntu box, but I can't see a darned thing on the Desire's screen. No little red circle at first power-on. No boot screens or animation. Nothing.
So...what did I do wrong? Am I missing something obvious?

HTC Wildfire is not listed as an option, is it supported by the tool?

I was wondering the same thing it would be great if this works on the Wildfire.

Well, to be honest if this is using Wine then it is pretty useless.
Anyway, does it work on the HD2 Leo ??

Android on HTC Touch Pro Problem

Hi,
I want to install Android on my HTC Touch Pro and I want to also do that Dual Boot program. Problem is that I can't get android to work.
I downloaded Android, and it is not installing well. After I boot, the top bar of the Android comes, but it seems all grainy, and my mobile restarts :/ I tried changing to a different RAPH startup.txt, but it just crashes in the middle -.-
Pics: (sorry, they are HUGE)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas anybody?!

Don't try changing to a different startup.txt! Make sure you're using the right file for your phone model. You could also try simply redownloading XDANDROID.

Which RAPH do you have?
Perhaps you need to read the FAQ.
Also, 1) don't take huge pics and post them to a thread - resize them and provide links if anything, although the pics seem useless TBH. 2) post in the build thread, don't create a new thread. Thanks.

@Ben_duder
I downloaded so many lol
@arrrgh
Thanks for that FAQ page, I know I have a RAPH100 now
1. Didn't notice how big they were until I posted them
2. Link to thread pls
Thanks for the help till now every1
EDIT: My download doesn't have RAPH100, but RAPH, RAPH500 and RAPH800 -.-
Is RAPH equivilant to RAPH100?
EDIT2: Ok, so i finally got a RAPH100 one, and it was installing. The last message was 'mp_dma : busy'
It kept on going after a bit, until screen calibration, i didn't even have the time to calibrate, as it kept on going.
Only to get 'stuck' on mp_dma : busy...again
Whilst writing this, it started again....only to get 'stuck'.....AGAIN...on mp_dma : busy....AGAIN!!
Is it normally like that? Does this site have live shat or smthn? Or can some1 PM their MSN/Skype so I can have 'live help' lol

Yes, it is "normal". What shouldn't be normal is the fact that you can't find the RAPH100 startup in the full bundle from THIS thread(for FroYo) or THIS thread (for Gingerbread). Keep in mind, FroYo is more complete and Gingerbread is still in alpha stages even though it seems more "stable" than FroYo.
Additionally, if you just want to be able to boot, the magic number we are looking for is 10 minutes. However, if you aren't getting to the XDAndroid boot animation, this might mean you aren't doing something right. Also, you'll need to grab the ts-calibration file for your device from either thread and put it in the same folder as haret

Hmm, I seem to have got it to work. It look me around 10 minutes to complete It seems ok (I downloaded the new XDAndroid from the official Wiki page). All works fine, incl. camera and Wi-Fi.
Now, I want to do the dual Boot thing. I have the exe downloaded, but now its a new set of CAB and EXT files. I'm going to opt for what seemes to be the newer version (v 1.0.6.0) but when i extract that and open a the file, I get 5 new files
Gen.Y DualBOOT QVGA v1.0.6.0 - Storage Card.cab
Gen.Y DualBOOT VGA v1.0.6.0 - Internal Storage.cab
Gen.Y DualBOOT VGA v1.0.6.0 - Storage Card.cab
Gen.Y DualBOOT WQVGA v1.0.6.0 - Storage Card.cab
Gen.Y DualBOOT WVGA v1.0.6.0 - Storage Card.cab
no idea what to do next.

If you have a RAPH100 use Gen.Y DualBOOT VGA v1.0.6.0 - Storage Card.cab. If you have a DIAM100 use Gen.Y DualBOOT VGA v1.0.6.0 - Internal Storage.cab
NOTE/hint
One installs to internal storage/soldered microSD and the other installs to the storage card/microSD

R^7Z said:
If you have a RAPH100 use Gen.Y DualBOOT VGA v1.0.6.0 - Storage Card.cab. If you have a DIAM100 use Gen.Y DualBOOT VGA v1.0.6.0 - Internal Storage.cab
NOTE/hint
One installs to internal storage/soldered microSD and the other installs to the storage card/microSD
Click to expand...
Click to collapse
Yeh i'll do that.
And I understood the Internal Storage and Storage card bit.
Also, I seem to get A LOT of lag when I play a game, is it normal? Probs coz the phone ain't too power full maybe

I did it, and it works well, it just tells me Android missing :S :S

Is haret in anything other than the root of the microSD? If not, it won't pick it up. There is a trick to get it to recognize the build in something other than the root of the microSD but you'll need to check in that thread where you got the dualboot program.

Yea the dualboot program is really a WinMo issue. You need to set the registry entry for it to work correctly.
But since it's not an Android or even an XDAndroid issue, I'd prefer you to post Gen.Y related questions in the correct section of the forum. Thanks.

@R^7Z
Haret is in Storage Card/bootand. And I forgot where I got the dualboot program though lol.
@arrrghhh
First of all, I'll thank you yest, as I'm restricted to 5 per day.
Also, link to where I can find this thread/section.
Thanks for all the help guys

In short if you want to use that program, you will need to visit the thread where you got the dualboot program from OR push everything up a level. In other words, cut and paste everything under the andboot folder to the root of the microSD and it should work like a charm, my friend!

R^7Z said:
In short if you want to use that program, you will need to visit the thread where you got the dualboot program from OR push everything up a level. In other words, cut and paste everything under the andboot folder to the root of the microSD and it should work like a charm, my friend!
Click to expand...
Click to collapse
What was the reason they told us to do an andboot folder then?

Well aside from "organization", not much else
I honestly only run one build because it is my preference to do so. Most who know what they are doing (or at least more than I do), use the rel_path=andboot option. "6 one way, half a dozen the other" is what I say.

R^7Z said:
Well aside from "organization", not much else
I honestly only run one build because it is my preference to do so. Most who know what they are doing (or at least more than I do), use the rel_path=andboot option. "6 one way, half a dozen the other" is what I say.
Click to expand...
Click to collapse
Well, apart from the fact that I understood NOTHING from that previous post, I want to say that it worked like a charm I cut all the files in the andbooot file to the right place, and what do you know, it worked!
I have a tiny thing to ask you guys Its laggy, and I mean VERY laggy. When i play games, like Angry Birds and such, it jumps, makes it tedious and not really fun to use. I do understand that my phone wasn't built for Android, and that Android needs higher system specs then Win Mobile (it also lags a bit on Win Mobile LOL) but maybe there is a fix to that.
When I check phone settings, it says I'm running Android version 2.2.2, which I think is the latest version, so maybe going to a previous version will make it better. I'm ready to take a small downgrade, only if I will still be able to use all my stuff (3G, camera, wi-fi etc.) I'm hoping to make Android my permanent OS, but with it being this laggy, I'd rather not.
Any ideas

S5660 - GIOPRO v1.6 (Android 2.3.6)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot :
Changelog:
Base on XXKTF Android 2.3.6 same feature as v1.5
Phiexz Kernel Version 2.1 with CWM 5.0.2.7 Recovery
Universal Mega Bass + Beats Audio Credit to wiendyn Geva Ardhany
Major bugs fix
All changelog - http://tinypaste.com/330a9dcd
Instructions :
SD Card Partition (optional)
If you need to use A2SD Darktremor very recomended you create ext2 partition on your
sdcard before you start flashing, if you don't want it you can skip this step.
Partition can be create using Partition Wizard, download here
Step to create partition.
1. Inset your SD Card to card reader (donot use phone)
2. Run Partition Wizard
3. Right click on SDCard select Move/Resize
4. Select your partition size
5. Click OK
6. Right click on unallocated space
7. Click Create
8. It will show a warning, click yes
9. Choose Create as Primary
10. Partition type Ext2/Ext3/Ext4
11. Cluster size 4Kb
12. Click Ok
13. Click Apply
14. Done
15. Now insert the SD Card to your phone
Flashing
1. Turn off your phone
2. PressHome + Volume [-] + Power button until it show downloading...
2. Connect your phone to PC
3. Run ODIN and insert all needed file
Code:
OPS = GIO_v1.0.ops
One package = GioPro_v1.X.tar
4. Click Start and wait until your phone reboot.
5. If you see a triangle after reboot just touch menu and select "reboot system now".
6. Enjoy
A2SD
To start a2sd run this command using ADB and wait until your phone reboot
Code:
adb shell
su
a2sd cachesdreset
If you want an extreem a2sd add this command
Code:
a2sd datasd
Download : (no other mirror please)
v1.6 - http://ul.to/tpw8z8ax mirror: http://turbobit.net/cc27f8p5prdx.html
Old build :
v1.5 - http://ul.to/n2u72auj Mirror: http://turbobit.net/86dmdtjdar9r.html (include CWM Recovery - Some user having problem with this version)
v1.5 non CWM - http://ul.to/0k9on6if Mirror: http://turbobit.net/em7o4le7gw9u.html
v1.4 - http://ul.to/wfxr8vbm mirror: http://turbobit.net/rgxdyvh1q8iv.html
All build -http://tinypaste.com/471c290a
GioPro v1.2 video review by
waqasshahzad1986
_____________________________________________
[FONT="Comic Sans
MS"]>>> SUPPORT MY WORK WITH A SMALL DONATION! <<<[/FONT]

I have some questions:
. Does this ROM support swap partition? With the GIO we'll need this feature.
. Do I need to backup my SD card as this is the first time I use darktremor and from the look of thing I need to partition my SD card right? Can you elaborate on how to use this feature?
Thanks.

bigeyes0x0 said:
I have some questions:
. Does this ROM support swap partition? With the GIO we'll need this feature.
. Do I need to backup my SD card as this is the first time I use darktremor and from the look of thing I need to partition my SD card right? Can you elaborate on how to use this feature?
Thanks.
Click to expand...
Click to collapse
it not support swap yet.
for using a2sd darktremor you need to make partition on your sdcard first before flashing, after you finish flashing just run a2sd cachesdreset from adb.

i think it's better if you included how to use it....
not all user here is an expert user...
and my question is, how about the compass sensor, is it working?

thanks, i think this is the first custom rom for gio on the internet!
is it possible to add some screenshots?

Which app?
Removed some unwanted App
Click to expand...
Click to collapse

GioPro Update v1.3
see first post...

Can i use it with Baseband S5660XXKB8 ?

May I ask what was specifically changed with "Batery life & performance tweak (Special thanks to code28h4p)", I tried to do a forum search but turned up with nothing.
Thanks, your custom rom is getting more interesting.

Thanks
Nicely done
works great only the a2sd gui settings are new to me
can you give me some instructions

nice job, its saves internal phones and ram very much, also i instal automemory , its getting battery saves also cools percentage battery (maybe next u change whole status bar)..
my question is,
1. did a2sd cachereset its get invalid command? i change it to cachesd
2. iam enable dalvik to ext. via adb
3. its not shown up in asd gui mem info? but its still work right?
any way its better 5 times than stock rom, god job dude.

I saw you have removed some apps, but I use Allshare can you give an external link for download?
thank you.

is there customrecovery for gio ????????????

I have a question. How you did this ROM? What you used?

nice
nice job my friend,
works good,
love the CRT animation on my gio.
i would love to have more updates coming.
keep it up.
greets from amsterdam

Nice custom ROM rachmat3.
i like the CRT Animation.
Can't wait for the next version.

I did flash with your given rom on my GIO but i faced two problem.
1. at the time of selecting PDA file it given me an error message "Invalid Item"
2. There is no battery percentage and CRT animation.
Hope you will help me soon.

Unwanted app removed (AllShare, Stock Clock, Dual Clock Widget, Book Store, Music Store, Hangman)
Click to expand...
Click to collapse
These are still present :-(

Rachmat3 said:
5. To start a2sd run this commang using ADB and wait until your phone reboot
Code:
[B]adb shell
su
a2sd cachesdreset[/B]
6. If you want an extreem a2sd add this command
Code:
[B]a2sd datasd[/B]
7. Done.
To start CRT Animation:
Setting > Display > Animation > Pilih "All animations"
Click to expand...
Click to collapse
i don't understand this code..use app?
terminal emulator?
help me plz..i use app2sd..it crashes @@

A2sd crashes everytime i try to open the gui
any sugesstions ??????????

Working Android V2.2.2 Froyo-beta3 for SCH M710/M715(T*Omina2-Korean)&SPHM8400KTShow

Working Android V2.2.2 Froyo-beta3 for SCH M710/M715(T*Omina2-Korean)&SPHM8400KTShow
Working Android V2.2.2 Froyo-beta3 for SCH M710/M715(T*Omina2-Korean)&SPHM8400KTShow
Special thanks to:
@ kgp700 from Modaco.com for making M715 kernel
@ ccllzz from myrom.5d6d.com for installation GHOST
@ Froyo for making Android for Omina2
@ to all for your contribution....
-----------------------
This thread I will show you how to make ANDROID work with SHC-M710/715 T*Omina2 Korean (GT-i8000 Omina2) step by step with figures; If you like it, just say thanks to me and above guys.
****** Special Note: This version is not I8000 Andrews adaptation. But of SHW-M110S change,
Step1) Format My storage with 3 partitions (Fat32, Ext2, Swap linux) by using MiniTool Partition Wizard Home Edition
Based on below sizeit is important for next step)
Fat32 : 5980MB
Ext2 (Linux): 1500MB
Swap Linux: 345MB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step2) Using Ghost32 Ver11.5.1
Disk-Partition-From Image
A long time, need some patience - about 10mins
3) Important step (you must have DOWNLOADED the ghost image and files HERE!!! or Mediafire and Rapidshare )
- copy all files in folder name Startup file to the root of My storage (Fat32)
- using ghost32.exe to ghost 0627.GHO or M715_Android.GHO image files to Ext2 Linux
******* M715_Android.GHO is optimize with default English language after boot
=> after done all above step just boot in WM6.x.x to run Haret.exe from the root of My Storage and waiting...
DISCOVERY yourself with M715 Android OS....
It is very easy for you to change OS language from Chinese to English by follow symbol of setting (first option is language selection)
========
MOD stick this thread up, thanks
Discussions are encouraged here, please don't SPAM
--------
Some pictures:

Please send me another link for this file
I can't download from both of above links
Thanks

It would be also nice to thank original authors and tell that it's only modification of original version for Omnia 2...

nhatnn said:
Please send me another link for this file
I can't download from both of above links
Thanks
Click to expand...
Click to collapse
i'll upload another download link soon, due to my internet to slow. it is about 750MB for English Ghost image with some optimizations (remove chinese applications)
Update DOWNLOAD link aready:
Important step (you must have DOWNLOADED the ghost image and files HERE!!! or Mediafire Rapidshare

coolpixs4 said:
i'll upload another download link soon, due to my internet to slow. it is about 750MB for English Ghost image with some optimizations (remove chinese applications)
Click to expand...
Click to collapse
it looks very good. i cant wait to install it. can you share rom as zip file. i think it is more smaller than ghost image. thanks for sharing

Unlock pattern
Hi,
I just installed this on my Omnia and after android boots I need to enter an unlock pattern.
What is the unlock pattern?

polixen said:
Hi,
I just installed this on my Omnia and after android boots I need to enter an unlock pattern.
What is the unlock pattern?
Click to expand...
Click to collapse
------------------
you put password pattern like "Z", sorry for forgotting remove pass
Suggested software for increase battery life:
- setcpu_2.24-donate.apk (set CPU min 133MHz-Max 800MHz)
- Easy_Battery_Saver_Task_Killer_2.4.1.apk (select intelligent mode)
- Advance Task Killer Free/Pro
please post your info about battery usage here:
like this image:
in my case: - display 30%, sell standby 41% (time without signal 12%), android system 11%, Phone idle 28% dailer 13%
With this apps installed, your HP can standby about ~1.5days, and normal usage (phone+sms+a bit wifi) about 1days. It is still lower than WM6.5 (standby 4days, normal use 3days)

Im sorry for that question but im not sure is that version will work on european I8000 Gt ?
Regards
Plz post some details about stability etc.

I really like your Room
It so good!
Ah! Why you know http://www.tinhte.vn/threads/1065252/ ?
It's Vietnamese Forum!
Do you know Vietnamese?
However! So Fantasic! I love it!
Have a problem with 3G?
I can't connect to Android Market or any conecting?
A, I want to boot phone with Android!
I Found it http://forum.xda-developers.com/showthread.php?t=623792
But it is not active with your Android version ?
Please!
Thanks You

an1000 said:
I really like your Room
It so good!
Ah! Why you know http://www.tinhte.vn/threads/1065252/ ?
It's Vietnamese Forum!
Do you know Vietnamese?
However! So Fantasic! I love it!
Have a problem with 3G?
I can't connect to Android Market or any conecting?
A, I want to boot phone with Android!
I Found it http://forum.xda-developers.com/showthread.php?t=623792
But it is not active with your Android version ?
Please!
Thanks You
Click to expand...
Click to collapse
----------
Find another Dual boot solution on www.modaco.com
If you find it please stick the link here also for others. Thanks !
HERE is the link for DualBoot: http://www.modaco.com/topic/330758-rapidboot-to-o2droid-updated-to-v11/page__st__40

Have a problem with internet 3g and all connection. I cant connect to internet market ?Can you fix it please?.
---------- Post added at 04:32 AM ---------- Previous post was at 04:29 AM ----------
Have a problem with internet 3g and other connections. I cant connect to internet market apps?
And the batterY status always "chArging”
Cant connect to pc for document.
Can you fix it please?.