vibration pattern - Touch Pro2, Tilt 2 Windows Mobile General

does anyone know the registry key for the vibration pattern, ive been looking and looking, but i just cant seen to find it, or does anyone know of an application that will do the same thing, thanks btw, this post is from my tilt 2, via opera 9.7

I would be curious to know this as well, the standard length for the ring vibration is much too long in my opinion.

I agree, and the zzz zzz zzz that the phone does when its on vibrate and you get an SMS is annoying and it lags sometimes too

i want to know how to change the amount of times my phone vibrates because whenever i get a text message my phone vibrates 3-4 times i want it to vibrate once or twice!

Related

Overclock on incoming call

Is there a possibility to overclock my Artemis when there is an incoming call? My device needs about 5 secs from powering on to ringing. I guess this could be accelerated by boosting the cpu to 270 MHz for 10 secs while receiving a call.
mhuhn said:
Is there a possibility to overclock my Artemis when there is an incoming call? My device needs about 5 secs from powering on to ringing. I guess this could be accelerated by boosting the cpu to 270 MHz for 10 secs while receiving a call.
Click to expand...
Click to collapse
Most ,if not all pocketpc phone devices need about 3 seconds before they ring ,there used to be a hack which eliminated that delay or at least significantly reduced this time ,i'll get back to you when i find it.
use smaller file for ringtone.
use .wma file instead mp3 or even .mid
My phone seems to lock up whenever I get a call and might answer after 10 seconds or might not answer at all. Has anyone else seen this? It seems to happen when I am on the phone dialler and an incoming call comes in.
It's very annoying because it means I have to take the battery out to stop it from ringing
I tried doing a hard reset and tried removing the o2 custom apps (it's an orbit) but I still have the problem.
I'm using spb mobile shell which I really like, but I'm wondering whether that's the cause of the problem
Hi. It's funny - my phone seems to ring immediately when there is a call, but an SMS is different. If off, the phone will switch on, and the screen lights up, but the text message can take up to 30 seconds before it actually displays. I know that a message is on its way now because the screen lights.. Very odd..
Hiznibz54 said:
Hi. It's funny - my phone seems to ring immediately when there is a call, but an SMS is different. If off, the phone will switch on, and the screen lights up, but the text message can take up to 30 seconds before it actually displays. I know that a message is on its way now because the screen lights.. Very odd..
Click to expand...
Click to collapse
Same problem here.
mital said:
My phone seems to lock up whenever I get a call and might answer after 10 seconds or might not answer at all. Has anyone else seen this? It seems to happen when I am on the phone dialler and an incoming call comes in.
It's very annoying because it means I have to take the battery out to stop it from ringing
I tried doing a hard reset and tried removing the o2 custom apps (it's an orbit) but I still have the problem.
I'm using spb mobile shell which I really like, but I'm wondering whether that's the cause of the problem
Click to expand...
Click to collapse
How many contacts do you have? Sounds too me you might have too many entries so when receive incoming call, WM5 take a while to match the number in contacts

Vibrate function sucks in WM6

I couldn't find anyone else complaining about this which surprised me.
I have tried all ROM's so I assume this is a WM6 issues but in WM5 with my 8525 when using the vibrate function whether it be for phone calls or new emails etc it would be a nice long constant vibrate.
Now with WM6 the vibrate function is a wimpy ass short 3 vibrate pulses. I mean I carry my phone right on my belt and I can barely feel it go off sometimes.
Is there a way to change this in anyway?
It vibrates AND sucks and you Complain ??
(sorry, couldn't resist....)
HAHA
but its my phone not my girl
Man I can't believe I'm the only one that this bothers and I can't find anyway to change it :-(
wbless said:
It vibrates AND sucks and you Complain ??
(sorry, couldn't resist....)
Click to expand...
Click to collapse
LOL! 10/10
Finally usable vibrate, the wm5 constant vibrate was so loud and hard that it was impossible to hear ring tone beneath it
WM5 used to sound like a cow mooing if on a wooden desk.
wbless said:
It vibrates AND sucks and you Complain ??
(sorry, couldn't resist....)
Click to expand...
Click to collapse
Now that's funny
Anyway, to try and give a possible solution (cos I don't always just complain about people posting repeat questions ) I remember reading something about ring \ vibrate patterns ages ago...
If you look in the blue angel wiki reg hacks page (here) there is a section about a third of the way down about phone settings and there's quite a bit there.
I've not tried it but it seems likely to be the fix
Good luck!
Yes but that is for just the standard ringtone because I already tried it. That hack doesn't do anything to the vibrate function for new email notification..
So my search continues but thanks..
wbless said:
It vibrates AND sucks and you Complain ??
(sorry, couldn't resist....)
Click to expand...
Click to collapse
some people are hard to please
I love the three short bursts... just enough to tell me theres a message but not too much to make my trousers look like there's a ferret in there trying to escape (like in WM5)!
unwired4 said:
I love the three short bursts... just enough to tell me theres a message but not too much to make my trousers look like there's a ferret in there trying to escape (like in WM5)!
Click to expand...
Click to collapse
Honestly I thought the same thing at first but I have noticed recently that I am missing them because its just not strong enough..Heck if I could up the amount of times to like 6 maybe that might help also..
Ok so to change the vibrate function during a phone call ring its
Phone Ringtone Script [HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
Change the value of "Script"
Here's the code:
a - stands for display
r - repeat/replay the script again
c - sets the volume C50, c150, c100
f - means flash .. f1 flash for 1 second and f0 stands for flash continuously
p -means play ringtone
v- vibrate then incorporate te]with number to state how many seconds it will vibrate example. v3 vibrate for 3seconds or v0 for continous
w - stands for wait or pause then specify how many seconds like w3(wait for 3 seconds)
Click to expand...
Click to collapse
So I figure with any luck I could find a registry setting for the vibrate on new email notification. The best I could find is under
HKEY CURRENT USER/CONTROLPANEL/NOTIFICATIONS
the ones at the top reprsent all of what you have for settings under sound notifications which I want but under the new email one theres no value called script.
Anyone else who is a bit more familiar with registry settings give me any ideas or anything?
thanks
kha said:
Finally usable vibrate, the wm5 constant vibrate was so loud and hard that it was impossible to hear ring tone beneath it
Click to expand...
Click to collapse
I agree I could not stand the wm5 vibrate, I am constantly using im+ and that constant vibrate would freeze the device when I would receive simultaneous messages.
my phone is still vibrate like WM5, long and non-stop.
WM5 was too much, I definitely prefer WM6 vibrate, but think something halfway between would be better.
It seems to me that not only is it not continuous but it doesn't vibrate as hard, thoguht hat might be because the motor takes too long to get up to full speed, so the 3 bursts don't get it running flat out?
Definitely an opportunity for someone to put together a little application to make it easy to customise.
Has anyone been able to find where this is in the registry? I have reverted back to wm5 and would like to change it to the wm6 3 pulse vibrate rather then the continuous.
Has anyone figured this out yet?
The long continuous one of wm5 was really annoying (esp. when phone is sat on the desk) but at least I didn't miss calls / not see texts/emails arrive.
I would prefer something inbetween. Perhaps 2x 1 sec bursts.
I don't have WM6 yet, but have been reading these threads before I do apply it -- and THIS is why.
good thing you reported back nahgum. I agree it's long and annoying, but at least if ur in a position that you can't glance at your phone, you know whether someone called or txted.
For those saying WM5 is long -- it would be great to find a way to do something like 2 1 2 for phone and 3 3 3 3 3 for txt. MrDSL is on the right track, just gotta find the key -- then someone could probably whip a little gui to make it nice and smooth.
I have WM6 (Black Satin) and it still has the long long vibration, which is quite annoying.
Any idea how to change to the 3 short pulses mentioned in this thread?
The registry tweak is quite limited (cannot have pulsing vibrations while playing ringtone).
Thanks!
You guys should look into a program called "Phone Alarm". It allows you to change the vibration feature to your heart's content.

Vibrate in WM6

I been using several different cooked WM6 rom for the past few months and the vibrate changes in WM6.
In WM5 the vibrate is like one long continually vibrate for about 6 seconds or so but whenever I Flash WM6 roms the vibrate will start pusling like 1 second then pause then 1 second and pause for about 6 second total.
I am not feeling the pulsing vibrate or keep missing it when it in my thick pants pocket or jacket and I been trying to find a setting or regedit to restore the vibrate back to one continually vibrate like it was in WM5.
I have search with no luck and does anyone know how to change the vibrate pulse and timing in WM6 or setting for the vibrate?
I know it WM6 rom because vibrate goes back to what is was when I go back to WM5.
Thank You
Bill
Have you tried going to phone>menu>options>phone and set the keypad setting to long tones and the ring type to vibrate and ring, this is how I have mine set up and it is one long vibrate.
boz said:
Have you tried going to phone>menu>options>phone and set the keypad setting to long tones and the ring type to vibrate and ring, this is how I have mine set up and it is one long vibrate.
Click to expand...
Click to collapse
Yeah I tried that and it works when phone rings but it the text message or emails or IM notifications etc that I wanted to have long vibrate like on the WM5 and it still pulse vibrate with the phone setting on long vibrate.
Sorry I should had added in my previous post that it was the notifications from txt or mms or emails or IM that I am trying to set long vibrate to but thanks for trying!
Thank you
Bill
does anyone know if there a binary in the registery that I can change the pulsing vibrate to one long vibrate in notification?
Thanks
Bill

Possible to disable screen for incomming calls?

I dont know if anybody can help, but the 1 thing that annoys my about my BA/wm6 is when you get a call, the screen is active, so when your geting it out of your bag or wher ever your touching the screen and loading up progs and stuff.
So is there a app or anything that will disable the screen when its ringing? At the moment Im using slide to unlock, and that will disabled the screen when calls are connected but not when ringing???
so why does the software companion make it?
I think to see the contacts incoming call!
Jejeje think about it... it cant be done man
Ive made it a tad better cos theres a option in s2u that ive found and it displays the s2u screen when you get a incomming call with just answer and end buttons at the bottom of the screen. I wanted those buttons gone aswel, but you cant have everything can you. The most important thing that Ive got rid of the today screen when you receive incomming calls.

weak vibration from droid incredible HELP!!

ok so ive installed apps such ass smart vibrator and vibseq i believe vibseq didnt even work .... the smart vibration is changeable.. but not rreally to my liking...... can anyone tell me other way to make the phone vibrate harder... i can barly hear when my phone is in my hostle.... hahhaahh
There are more punctuation marks in the world than "...". Lawdy, at least read what you're typing.
If your not "satisfied" with the vib motor, I think you're stuck getting a new "phone".
ok so ive installed apps such ass smart vibrator and vibseq i believe vibseq didnt even work .... the smart vibration is changeable.. but not rreally to my liking...... can anyone tell me other way to make the phone vibrate harder... i can barly feel it vibrate when my phone is in my hostler.... sorry if this is a repost or if it got answered already i did a search but couldnt find anything on this...
To add to this is there a way to make it vibrate multiple times for an incoming text. My police department sends me a text message for a swat callout but it only beeps or vibrates once. Is there a way to make it keep going off until I acknowledge it?
psalm462 said:
To add to this is there a way to make it vibrate multiple times for an incoming text. My police department sends me a text message for a swat callout but it only beeps or vibrates once. Is there a way to make it keep going off until I acknowledge it?
Click to expand...
Click to collapse
psalm462 - I believe "Missed Call" can provide the functionality you're looking for.

Categories

Resources