Hey guys, I'm sure most of you have realized that the camera on the evo sticks out like crazy, so how do you rest it on the table? i'm always paranoid I'll mess up the camera
I'm 99% sure the kick stand would solve that dilemma. But hey I'm no genius
Kshawn said:
I'm 99% sure the kick stand would solve that dilemma. But hey I'm no genius
Click to expand...
Click to collapse
I don't want to pull out the kickstand every time I put down my phone, i'm likely just going to get two rubber bumpers to put up near the top corners.
Is it really that big of a pain to deploy the kickstand?
chazglenn3 said:
Is it really that big of a pain to deploy the kickstand?
Click to expand...
Click to collapse
EVERY SINGLE TIME, yes
Not to mention more chance of it getting broken
mrono said:
I don't want to pull out the kickstand every time I put down my phone, i'm likely just going to get two rubber bumpers to put up near the top corners.
Click to expand...
Click to collapse
~Agrees.
That what i'd probably do. A very small one.
I kickstand it. It takes half a second to pop it out with my ring finger.
get a full-body case for the phone
TheBiles said:
I kickstand it. It takes half a second to pop it out with my ring finger.
Click to expand...
Click to collapse
That's what I thought. I'm sure I will do the same. The kickstand is aluminum, right? Little chance of breaking it...
Personally I bought a screen protector and set it face down. Everyone wins!
i probably won't kickstand it too often.. all u need is some dumbass to walk by, accidentally hit ur phone and send it flying.. good bye evo
I never kickstand it when I want to set it down. I just put yet on its back and even though the camera glass is touching the table it doesn't have any scratches.
Sent from my HTC Evo 4G using Tapatalk
pretty much any case will wolve the problem, honestly, I'm probably going to cut out a circular protector for the glass on the camera, that way i both don't need a case, and I don't have to kickstand it ALL the time(most of the time i probably will just because the kickstand is awesome and i can use it as a clock if needed).
If the covering over the lens is real glass, then scratching will likely not happen. Glass used in these situations is extremely scratch-resistant.
I wont want to pull the stand out every time either. That would get to be a PITA. Im going to look at body gloves also
I saw one of best buy's demo models on dislay in the store and the camera didnt seem to poke out far enough to hit a surface. Of course this is based off of visual estimation. Plus I cant imagine the HTC developers would overlook something like that.
I'd just use the kickstand or put it back in the pocket.
I's just wanna show the kickstand off.. "Yeah, my phone can sit up... Whatever you know I get the best stuff..."
Dorick said:
Hey guys, I'm sure most of you have realized that the camera on the evo sticks out like crazy, so how do you rest it on the table? i'm always paranoid I'll mess up the camera
Click to expand...
Click to collapse
Put it in a case
mrono said:
I don't want to pull out the kickstand every time I put down my phone, i'm likely just going to get two rubber bumpers to put up near the top corners.
Click to expand...
Click to collapse
I cut up some pieces of leftover bike tape (the stuff that goes on the handlebars) and made a little box around it, its soft and feels good in your hands, protects the EVO's (strangely unprotected) camera BUT does admittedly make it look a bit ... odd. As odd as it may look, it does completely put my mind at ease about messing up/scratching the lens.
HTC placed a kickstand at the back so you wouldn't worry about things like this. So I guess we should use it for it's intended purpose.
Related
So I decided to NOT but a case around my pretty phone an go naked for a bit. The concern is about the camera lens. I have been getting more and more "careless" with the phone.. not putting it on a soft napkin and just laying it on a table. I have a screen protector on the front so maybe I should just lay it face down. But I am wondering.. anyone have an issue with the camera without using a hard case? The lens actually seems pretty strong....
I've never used an extra case for a phone, they already come with a nice sexy hard plastic one. However with the Evo i would never use it without a screen protector. I think the lens is decently strong, it can take being set down on. Still be careful though.
I use nothing at all not even a screen protector..and it's in perfect condition..i hope it stays like that
-------------------------------------
Sent from my Htc Evo 4g
I am hunting for a case right now. The phone got pushed by someone's elbow across the table and the sound nearly made my ears bleed and my heart stop. Luckily it didn't do anything to the raised camera, but I am not risking it again.
The Nexus lens is a lot like the Evo lens. I've had mine going for 3 months with rough use and there are a few tiny scratches on the lens, but nothing major. it doesn't effect the image quality at all.
I wouldn't be too worried
my zagg came with a cut out for the camera, going to just drop that on there
I got rid of my Hard case and got the Zagg full body and seidio holster my camera is holding up fine no scratches and i don't lay it flat on the screen
Do what I do...
Pop open the back case, and put on a square piece of CLEAR tape (not the scotch kind), packaging tape seems to work pretty well. Make sure it doesn't overlap on to the back speaker as it can reduce the phone's loudness. Then put the case back on. From time to time just replace the tape when it gets too scratched up.
Screen protector and nothing else. I normally leave the phone screen down on the desk.
I am not that concerned about the camera. There is always a way to replace parts on these phones (you can replace the screen 'relatively' easily also). I am sure I would be able to replace the camera cover/plastic/glass piece.
going streaking
been using it with out any screenprotectir abd case, not a single scratch *knock on wood* the new age screens are not ment to be used with a screen protector, and case just BLAH UGLY
I use a black silicon case and screen protector. I went nude for a while and I was just too nervous about it. The case is easy to take off, so if I let someone play with it, I often just take it off first so they can see just how nice the phone is. Something I like about the case is that the lens doesn't touch the surface when I lay it down - and I don't lay it on the screen, not that it would matter.
Another plus is that it doesn't slip out of my pocket like it used to (and any other phones I've had) when I'm active. Lots of pluses. Just too bad this particular one doesn't look that cool (not bad though). I'd really like to find a similar case that actually looks cool, maybe sporty.
I always use the kickstand and just prop up my phone. I am having no issues at all.
no case no nothing
it's gonna get wear and tear
but you're gonna get a new phone in 1 - 2 years anyway right
I always use a case to keep the phone in good condition for when I sell it after I'm done with it. It always gets top dollar since all the other used ones online being sold are junked up. But to each their own I suppose. Good luck!
No case, no screen protector. Looks like it did when I got it June 4th.
I just ordered this today: http://www.handhelditems.com/product_info.php?cPath=3524_5132_7769&products_id=135999
And it's cheap and it looks like it will do the job just fine with out adding much profile. I'd choose this over a naked alternative. Mine is partially naked, it has a screen protector and has been fine since.
I'll let you know how this case is when I get it.
rutter9 said:
I always use a case to keep the phone in good condition for when I sell it after I'm done with it. It always gets top dollar since all the other used ones online being sold are junked up. But to each their own I suppose. Good luck!
Click to expand...
Click to collapse
Same here. I always sell mine cause they still look new. I sold my Moment when I got my EVO and got $230 for it on eBay.
Sent from my EVO using Tapatalk
I don't use a case and the camera is just fine, no scratches at all. I even dropped my phone on concrete like, the 3rd day I got it (missed my pocket lol) and the phone is completely fine, aside from a scratch on one of the corners that isn't noticeable unless you're looking for it. Speaking of which... I WANT A BUMPER CASE!! like this.. except black lol.
http://thenextweb.com/mobile/2010/06/11/pictures-of-iphone-4-bumper-cases-surface/
if anyone finds one let me know
I do not have any screen protector or case, and (until I get a dock) I set my phone down camera face down. I got it opening day and have no scratches on the screen, but there are tiny, minute scratches on the camera lens glass. Though they are contained within the black, non-lens area that reads "8.0 Megapixels". It almost seems like this was intentionally done, as when you set the phone down on the camera, it's at an angle and the viewable part of the lens doesn't seem to touch the table. Photos I take are unaffected. It seems harmless and I will keep going "naked" with mine. I'll try and take a close up pic of the affected area if anyone wants to see.
I've been really careful with the phone but got my first scratch on the lense yesterday. It must have happened in my pocket yet I only keep the phone by itself in there. The Evo is a beautiful phone but having that protruding lens is a retarded design.
I recently picked up a cheap, generic lanyard for use with the Note and have found that it completely changed the way I hold and use the phone. It makes holding the phone a lot more comfortable and allows for full single hand usage of the phone. Also, I have done some drop tests and it pretty much drop-proofs the phone (linked below is a video of a drop test I did). I HIGHLY recommend getting one of these, if only for the increased flexibility it gives you when using it single-handed.
How it Helps Single-Handed Use
Because the lanyard I got has a clip on it I am able to detach the lanyard part of it and just have a little “tail” of sorts on the phone. I almost always have this tucked between my middle and ring finger when holding the phone, as it allows me to comfortably hold the phone without needed to support it from the bottom of the phone with a finger. It is hard to explain, so I took a video of it (linked below). This manner of holding the phone means that the ONLY part of the hand that needs touch the phone is the middle and ring fingers on the center of the back plate of the phone. The traction from the skin on the back plate keeps it from moving left/right, gravity keeps it from moving up, and the string connecting the bottom of the back plate to the tips of my middle/ring fingers keeps it from falling. It basically feels like the phone is floating in your hand when holding it like this. It allows you not only to comfortably hold it and use your thumb, but use both your thumb and index finger for zooming and panning as well! And, if you tilt the phone in your hand, you can reach ANY part of the screen with your thumb. You can manipulate the phone however you like, by doing this, without fear of dropping it because the string is firmly between the two fingers.
(This video is in HD so you can press the 720P button and make it fullscreen to see more)
http://www.youtube.com/watch?v=QMQ32JT3Uk8
Drop-Proofing
The video shows it the best but you can drop the phone however you want and it will be caught by the lanyard every time. The back plate is fit so securely into the phone that it does not budge, not a single clip of the back plate has come undone in any of my tests (and in one of my tests I flung it around in a circle on the end of the lanyard). Quite amazing really, defeats the need for an OtterBox for me.
(This video is in HD so you can press the 720P button and make it fullscreen to see more)
http://www.youtube.com/watch?v=kXFOAuDcmRU
More Pics
Pic 1
Pic 2
Pic 3
----
If you like this post thank me by pressing the 'Thanks' button
A+ for creativity.
Hey, watched your vids. How are you using this 1 handed? It looks like you've somehow got the thick part of the lanyard up close to the phone in that video...
nice work.
By the way, did you hurt your finger doing this mod ?
copualt3: Thanks!
gerizafa:
Hopefully the linked photo below illustrates it more clearly. I simply tuck the lanyard attachment between my middle and ring finger and it holds the phone.
http://i66.photobucket.com/albums/h260/piranha_pilot/IMG_0988.jpg
blobotorian:
Thanks! And lol no I didn't, I accidentally cut myself while absent-mindedly taking knives out of the dishwasher.
would it **** u off if the back cover fell off and ur phone smashed?
bamboo12 said:
would it **** u off if the back cover fell off and ur phone smashed?
Click to expand...
Click to collapse
I too use a lanyard, but have mine attached to the flip case back (also at the speaker hole).
Firmly pulling the flap away from the lanyard, and nothing happens. It's not coming off by accident.
BTW... I have a much smaller lanyard with nice leather detailing. Without ever consciously thinking about it, I have gotten into the havit of leaving the lanyard dangling out of my pocket, and my hand subconsciously goes through the lanyard every time I take the phone out of my pocket.
I plan on using a Nillkin TPU case which has strap holes and an SGP Asturias leather handstrap on my imaginary Note. I say imaginary because it's all just an idea, I might get one, I might not. The dev community is so good for the SGS2 that I'll just miss having so many options and tweaks.
@unsinkable can u post some pictures
I did this exactly, sturdy at first but I kind of have the feeling that plastic grill will break some day.
Still better than having the whole phone break after a fall tho.
Not having included a proper lanyard hook like in SGS2 was a huge shortcoming for note designers. SGS2 had the con of an unproperly placed lanyard in the top part of the phone, but still!
I'm finding it rather difficult to get my lanyard's string through my speaker phone grill.
It is in fact hard, the typical lanyard end-cords are thicker than the space avaialble in the grill, but if you push attentively enough, or use the help of a tiny object like a de-tipped needle, to push the loop in the middle for you, it is then pretty easy to do the job.
manhattan212 said:
I'm finding it rather difficult to get my lanyard's string through my speaker phone grill.
Click to expand...
Click to collapse
Hmm just remove the back plate first and then tuck it in and out?
broke mine.
My lanyard broke the little bar behind the speaker.
I personally don't think much force was used to make this happen.
It didn't break it off completely, just one side. So I pushed it back in, so that cosmetically it looks ok -but I certainly can't attach a lanyard on it again.
I'll have to find a case/shell with a lanyard loop.
Incidentally, does anyone know if it's possible to get a replacement back panel?
manhattan212 said:
My lanyard broke the little bar behind the speaker.
I personally don't think much force was used to make this happen.
It didn't break it off completely, just one side. So I pushed it back in, so that cosmetically it looks ok -but I certainly can't attach a lanyard on it again.
I'll have to find a case/shell with a lanyard loop.
Incidentally, does anyone know if it's possible to get a replacement back panel?
Click to expand...
Click to collapse
Metal ones to be found on ebay
Sent from TapaTalk on my Samsung Galaxy Note
thanks for the vids . .
but seems a bit much to wear a wrist leash to carry a cell phone?. .
manhattan212 said:
I'll have to find a case/shell with a lanyard loop.
Click to expand...
Click to collapse
Please share if you do find one. I'd also be interested in a case with a lanyard loop spot!
mcatt66 said:
thanks for the vids . .
but seems a bit much to wear a wrist leash to carry a cell phone?. .
Click to expand...
Click to collapse
I thought so at first but it soon becomes 2nd nature (5 weeks now)
zkyevolved said:
Please share if you do find one. I'd also be interested in a case with a lanyard loop spot!
Click to expand...
Click to collapse
the ringke case in the thin case thread has lanyard holes
zkyevolved said:
Please share if you do find one. I'd also be interested in a case with a lanyard loop spot!
Click to expand...
Click to collapse
Nillkin has one. They're fairly easy to find on ebay. I think they have multiple colors, or something.
It's only been 1 week and the poor quality, flimsy back cover is showing wear and tear. It won't get into its allocated slot, and by the looks of it, seems that it became a fraction shorter.
It always seems click in better for me if I start at the bottom and work up.
TareX said:
It's only been 1 week and the poor quality, flimsy back cover is showing wear and tear. It won't get into its allocated slot, and by the looks of it, seems that it became a fraction shorter.
Click to expand...
Click to collapse
You're not putting it in correctly. Gotta make sure the bottom tabs are before you start snapping the rest. I have more success getting the right tab in first and messing around till the other tab falls in and the bottom of the cover kisses the phone.
My grandma beat me down and took my nexus. Sent from a jitterbug with beats by dre.
SOLVED: Thanks to this guy from androidcentral:
"Originally Posted by DBVille: And, make SURE the hooks aren't bent up. I am betting the hooks have been bent up, at least on one side, from trying to push it closed. (dont ask how I know). Look very closely at the hooks. Put your finger nail under them and pry them up/apart from the back if they are too close to the cover to engage the clips on the phone. When done right, it just snaps on. But, you must get the bottom done first."
The hooks were bent up... fixed them with my nails. Now it snaps back on. Still pretty cheap though.
Or user error?
My grandma beat me down and took my nexus. Sent from a jitterbug with beats by dre.
you're not supposed to snap in the bottom hooks, you lock them in first, then snap in the ones rest...
wonshikee said:
you're not supposed to snap in the bottom hooks, you lock them in first, then snap in the ones rest...
Click to expand...
Click to collapse
+1 this is how I do it...common sense...
Sent from my Galaxy Nexus using XDA App
Happen to me too the first week. I'm a pro now.
Sent from my Galaxy Nexus using xda premium
God, the build quality and camera are a real disappointment on this phone. thanks for the tip on bending up the tabs.. worked for me..
never the OP's fault that he doesnt know how to put the back cover on.. always Samsung's fault for not making it tard proof.
Zepius said:
never the OP's fault he doesnt know how to put the back cover on.. always Samsung's fault for not making tard proof.
Click to expand...
Click to collapse
Admittedly the back cover of the GN is one of the more complicated ones to put back onto the phone.
Do not force it on - if you do it right, it will go back on with just a little pressure. Like others said before you have to start at the bottom latches and work your way up from there. Note that the bottom latches are different from the others and do not snap in like the rest.
I'm extremely pleased with the build quality of this phone! A product feels VERY well build when you can't make it flex slightly or make the battery cover creak by squeasing the phone a certain way! Looking at you, HTC! The DInc, Thunderbolt, and Rezound that I've had all suffered from that. (Though I couldn't make the Thunderbolt flex)
And anytime you drop an HTC phone, first the battery door flies in the air, then the battery pops out -.-
Samsung on the other hand, the Nexus is VERY solid, battery door doesn't creak nor does the frame. No creaking sounds at all. I cannot flex the phone. What is it with people dissing Samsung for making plastic phones, what do you want them to do? Engineer a new compound? Geez
As so many have pointed out, the cover doesn't snap at the bottom; you start there by inserting the bottom hooks, then snap the sides and top.
In fact, I've found the easiest, most effective way to do it is laying out face down, insert the bottom hooks, then zip up both sides together with my thumbs, finishing with effortlessly snapping the top in.
As for the build, I couldn't disagree more strongly. The back design is brilliant. The phone overall is rock solid, and has solved the common back pop-off battery pop-out of most phones today.
Sent from my Galaxy Nexus using xda premium
I was at a Verizon store last night. Picked up the phone from the display they had it in. The back cover fell off along with the security device. Does the cover have issues staying on? Would a case solve this issue?
Tisosview said:
I was at a Verizon store last night. Picked up the phone from the display they had it in. The back cover fell off along with the security device. Does the cover have issues staying on? Would a case solve this issue?
Click to expand...
Click to collapse
There is no issue if you put it on correctly.
Sent from my Galaxy Nexus using Tapatalk
Careful because our store model had a broken back cover since day one. Two sided take is holding it together at the moment.
Tisosview said:
I was at a Verizon store last night. Picked up the phone from the display they had it in. The back cover fell off along with the security device. Does the cover have issues staying on? Would a case solve this issue?
Click to expand...
Click to collapse
Happens at all the stores. Some have ziptied the backcover back on . However, it really is a non issue. In the case of the store phones, the heavy security device that is glued onto the back cover, pulls very hard at the back cover and it creates issues. In reality, given that it is a completely flat piece of plastic that is sitting flush against your phone with no handles, there is no way to exert even remotely the same amount of outward forces on the back cover.
While removing and putting on the backcover doesn't feel great, the cover does a great job, helps keep the phone slim and light, and looks pretty damn good. The store model did put me off due to this same issue with the security device, but I have had absolutely no issues with the backcover, or the phone feeling flimsy (and I came to the GN from the OG!).
LOL the back cover is well built imo. Just because it is thin does not mean it is of poor construction.The people who are having problems just aren't bothering to learn how to put it on. You don't just snap the whole thing on. Put any backcover on incorrectly and you risk damaging it.
I remove my back cover regularly to swap SIMs and although I've had it since release day not only does it look the same as it did when I bought it but it functions perfectly too (stays on nice and tight).
TLDR; If your tabs are bent you're doing it wrong. Don't blame design for your lack of intelligence.
Thank you for the replies. It is reassuring.
I found it funny that the security really didn't work for this device. Since the alarm didn't go off when the back fell off.
Bottom tabs get bent up
I've had my GN for a little over a week. The problem that I have, and I assume the others have, is that the tabs at the bottom get bent up so that they can't hook in.
I bent them down with my fingernail so that they are horizontal again, and it clicked in fine.
My concern is that this is already a problem after a week, and plastic can only take so much bending and fatigue before it totally breaks, which will eventually occur. I would imagine that at least some people who have had their GNs since launch have already experienced this.
Frankly, I think this is a manufacturing issue that Samsung should ultimately address.
I just want to know how you guys without screen protectors or cases feel about putting the phone face down when listening to music or something...
Are you afraid of scratches?
Guess it depends on the table/surface, but I'd never like to make a practice of it. I guess at worse it's scratching the top/bottom and not the middle, but more than likely it's going to scratch the plastic bezel on the top/bottom which looks terrible when it happens.
I just leave it back-down so I don't risk it.
I've only had mine for about two weeks but yes I'm not comfortable putting it face down unless it's on a smooth surface like my bed or bag or something like that.
People who are worried about scratches won't leave the phone naked in the first place.
My friend never puts any protector or case on his phones and his argument is 'it's just a phone, not my girlfriend. Why protect it so well when I'm gonna toss it away for a new one in about 1.5 years?'
MilkPudding said:
People who are worried about scratches won't leave the phone naked in the first place.
My friend never puts any protector or case on his phones and his argument is 'it's just a phone, not my girlfriend. Why protect it so well when I'm gonna toss it away for a new one in about 1.5 years?'
Click to expand...
Click to collapse
That's not necessarily true. Sure it might be from some people but not for me and I'm sure others as well. I care a lot about my products but I just love the way my GNex feels and looks without any cases and screen protectors. I guess I'm taking a risk by not protecting it but for the time being I'm going to enjoy it the way it is.
MilkPudding said:
Why protect it so well when I'm gonna toss it away for a new one in about 1.5 years?
Click to expand...
Click to collapse
Resale value of unlocked phones. If I smash my gnex, so be it. But I like to put a screen protector, and one of those 3m decals a-la gelaskin or decalgirl, etc... so that way my keys or change or table scratch that instead.
mongoro said:
Resale value of unlocked phones. If I smash my gnex, so be it. But I like to put a screen protector, and one of those 3m decals a-la gelaskin or decalgirl, etc... so that way my keys or change or table scratch that instead.
Click to expand...
Click to collapse
I don't get why people don't put their phone in a separate pocket to avoid scratches from change, keys etc
Just dun put keys n ur phone in da same pocket ..
3bs11 said:
That's not necessarily true. Sure it might be from some people but not for me and I'm sure others as well. I care a lot about my products but I just love the way my GNex feels and looks without any cases and screen protectors. I guess I'm taking a risk by not protecting it but for the time being I'm going to enjoy it the way it is.
Click to expand...
Click to collapse
I guess you will eventually pick a side - either throws on a case/protector or just use it normally and forget about scratches. It's hard to be using something everyday and worrying about it all the time.
mongoro said:
Resale value of unlocked phones. If I smash my gnex, so be it. But I like to put a screen protector, and one of those 3m decals a-la gelaskin or decalgirl, etc... so that way my keys or change or table scratch that instead.
Click to expand...
Click to collapse
If you are thinking about reselling the phone then yes, it makes sense to protect it well. For him, he either took it apart or tossed it away LOL.
MilkPudding said:
People who are worried about scratches won't leave the phone naked in the first place.
Click to expand...
Click to collapse
Not really... I hate the feel of cases and screen protectors especially, so I'm extra careful with my phone because it's not protected.
I put mine facedown down on a supposedly smooth table and when i picked it up, scratches! Be safe just don't put it face down on anything but a soft surface - as suggested above. It is just a phone, but it is a very nice and expensive phone!
I can't stand those skins and screen protectors, takes away from the natural beauty of the phone. I have a SPG leather case so if it is face down, and it really never is I put it face down on the case.
I do take extra care of mt phones though because I like to switch up about every year. It is great for resale, plus more cash for towards the next phone.
Glass is hard, but not that hard. There are a ton of substances that can easily scratch it. I don't put it face down unless it's in a case.
Ask yourself, what would Moh do?
mudferret said:
Ask yourself, what would Moh do?
Click to expand...
Click to collapse
Nerd alert.
martonikaj said:
Nerd alert.
Click to expand...
Click to collapse
Word.
Sent from my Galaxy Nexus using xda premium
on my bed i put it face down on my fur blanket...and in my pocket its on its own with nothing else....i slide the phone in my pocket with my palm facing the screen, and when its in my pocket, i flip the screen to face my leg! zero scratches (so far) and ive had it for a few months
Why should I put the phone face down to start with? I can't show off my rainbow LED notifications if that's the case
Sent from my Galaxy Nexus using xda premium
We would put our phone face down to increase volume when listening to music?
I decided to put a protector on mine. While I like the look and feel of the screen better without it, it just isn't worth the risk to me. I plan on having this phone for a while. (I had my DroidX for almost two years prior to getting the Galaxy Nexus).
Besides, it is rarely your car keys that scratch the screen (because we are generally careful about those). More often than not it is something really small like a piece of sand or a tiny rock in your pocket or on the table that will get you. Unless you blow out your pockets and sweep the table before you put your phone down, you are likely to get a scratch eventually.
sic0048 said:
I decided to put a protector on mine. While I like the look and feel of the screen better without it, it just isn't worth the risk to me. I plan on having this phone for a while. (I had my DroidX for almost two years prior to getting the Galaxy Nexus).
Besides, it is rarely your car keys that scratch the screen (because we are generally careful about those). More often than not it is something really small like a piece of sand or a tiny rock in your pocket or on the table that will get you. Unless you blow out your pockets and sweep the table before you put your phone down, you are likely to get a scratch eventually.
Click to expand...
Click to collapse
I always take the inside of my pocket out and brush off lint, or whatever in there! I just cleaned my screen with a lint free cloth and put it under a light to verify no scratches...and I found zero! Not even a lint scratch! Phew! Lol
Sent from my Nexus Prime
so, i've got way too much time on my hands and was looking for a brushed aluminum style back cover to match our cameras online. I could find nothing. i started looking into the process of melting aluminum, which is surprisingly easy, as is creating the brushed effect. as of right now i currently have my back cover pushed into some drywall mud (no modeling clay) and drying so that i can form the second half of my mold. just thought i would inform you guys of my insanity!
TL;DR : trying to make an aluminum back cover from scratch.
extravillager said:
so, i've got way too much time on my hands and was looking for a brushed aluminum style back cover to match our cameras online. I could find nothing. i started looking into the process of melting aluminum, which is surprisingly easy, as is creating the brushed effect. as of right now i currently have my back cover pushed into some drywall mud (no modeling clay) and drying so that i can form the second half of my mold. just thought i would inform you guys of my insanity!
TL;DR : trying to make an aluminum back cover from scratch.
Click to expand...
Click to collapse
I wonder how that will work as far as cooling is concerned. Post some pics when you've got it all set.
dbjungle said:
I wonder how that will work as far as cooling is concerned. Post some pics when you've got it all set.
Click to expand...
Click to collapse
I think antenna reception would be a bigger concern. Still, I would totally plunk down some cash to buy one, if you figure out how to do something easily repeatable...
Keep us posted, this sounds like a really cool idea!
i'll definitely let you guys know how it goes. good to know people care because it will keep me from stopping half-way through. haha. i'll probably do most of it this weekend. the drywall mud was pretty dumb, im probably going to use a greensand mold and see what i can do with that. ill just do the dividing line along the back of the back cover.
the bad news: greensand is hard as hell to find at stores or anything
good news: i have scrap aluminum, and i can borrow my girlfriend's dad's propane torch. i went out and bought plaster of paris tonight. Going to set up the mold tomorrow morning and once it is hardened i can start the process of melting+pouring+setting the aluminum in the mold.
turns out walmart sells plaster of paris in a big purple box covered in flowers, which made it somewhat difficult to find considering nobody there knew what it was....
bottom half of the mold is set and drying. here's hoping i can get it back out. haha.
Looks like it might be kinda hard making sure the holes for the speaker are cut out properly!
i made sure the plaster got far enough into the holes to make an imprint, but not far enough to seal the back to the mold.
extravillager said:
i made sure the plaster got far enough into the holes to make an imprint, but not far enough to seal the back to the mold.
Click to expand...
Click to collapse
thats good! Do you have a dremel or something else to smoothen out edges? Molds typically create a lot of extra garbage on the side that needs to be cut off... Your using aluminum right?
If yours comes out good and doesnt hinder the signal quality too bad, i think i might do the same
PMad said:
thats good! Do you have a dremel or something else to smoothen out edges? Molds typically create a lot of extra garbage on the side that needs to be cut off... Your using aluminum right?
If yours comes out good and doesnt hinder the signal quality too bad, i think i might do the same
Click to expand...
Click to collapse
yeah, i've got plenty of tools and scrap aluminum. depending on how well it turns out/how it affects the phone i may offer to sell them to people on here.
that isnt to say that buying one will be the only way to get one. I will be sure to post a full and detailed tutorial when i am finished for anyone adventurous enough to attempt it.
No to be a pessimist but did you notice that there is something on the original cover that seems to be taped in the cover? I figure an antenna?
How will you do it?
sent from LG OPTIMUS LTE using Tapatalk
I've noticed no difference in signal quality with the back cover removed so I don't think the back cover's antenna helps a whole lot lol.
Sent from my LG-P930 using XDA
stemalo said:
No to be a pessimist but did you notice that there is something on the original cover that seems to be taped in the cover? I figure an antenna?
How will you do it?
sent from LG OPTIMUS LTE using Tapatalk
Click to expand...
Click to collapse
i've been without a back cover while it is setting for about a day now and haven't noticed any adverse effects.
bottom mold is done, and looking pretty good besides a few air bubbles that i need to fill.
You may want to look at the back cover a little more closely. The warning message to not scratch the sheet makes me think the back cover also helps to serve as an antenna possibly??? Not sure, but it seems odd to have the warning.
About the sticker being an antennae, that never crossed my mind. For some reason I always assumed it was something to distribute heat away from the battery.
Both possibilities seem very plausible though.
schwin97 said:
You may want to look at the back cover a little more closely. The warning message to not scratch the sheet makes me think the back cover also helps to serve as an antenna possibly??? Not sure, but it seems odd to have the warning.
Click to expand...
Click to collapse
it crossed my mind. however, like i said earlier, i was using the phone without a back for over a day and a half and didnt notice any adverse side effects (aside from the battery falling out.)
schwin97 said:
You may want to look at the back cover a little more closely. The warning message to not scratch the sheet makes me think the back cover also helps to serve as an antenna possibly??? Not sure, but it seems odd to have the warning.
Click to expand...
Click to collapse
I think thats for NFC
nfc would be nice. How do we use it if its there?
Sent from my LG-P930 using XDA App