Help with my sd card - Desire General

Ok so recently i tried flashing modaco r3 rom and then i rebooted, but then it was stuck in the quietly brilliant screen for quite a while then tried flashing again and i still got the same problem. I then tried restoring via nandroid but i still got the quietly brilliant screen for a long time. I then tried putting the backup onto my other sd which is 8gb (was using 16gb sd before) i then restored and it booted but now i wanna know how to get my 16gb sd working again because ive refomatted it and everything and it still doesnt work with my desire
So can anybody help me?

Just out of curiosity, did you wipe before flashing the custom ROM?
And for the SD card issue - I would recommend recreating the partition and formatting it, rather than just reformatting it.

Had the same problem. I repartioned SD but did not convert to ext3. that did the tricj for me

Re-Partition the SdCard with an Ext3 Partition and use APPS2sd+ This worked fine for me !

xtcislove said:
Re-Partition the SdCard with an Ext3 Partition and use APPS2sd+ This worked fine for me !
Click to expand...
Click to collapse
ok thx will try this now

wow that was easy...it works thanks guys for your help

Related

Error when installing App2SD

Hi, i am trying to install app2sd using the Nimbu guide found here : http://nimbu.amorvi.com/2010/05/how-to-root-your-htc-desire/
However, when i follow that guide and start to flash from the sd card, i get this error:
E:Can't symlink /system/xbin/[
E:Failure at line5:
symlink busybox SYSTEM:xbin/[
The card i am using to flash the app2sd is NOT partitioned. Is this an issue?
Here is some other info on my phone
- i have an orange phone, but i reflashed to the 1.21.... generic rom
- After installing this rom, i flashed the radio back to this one: update-bravo-radio-32.30.00.28U_4.05.00.11-signed.zip
If you need any more info let me know and thanks for your help
ok, just to update this...
i have now managed to install app2sd by reinstalling rootedupdate.zip
HOWEVER, now when i turn my phone on it just goes to the white HTC screen and hangs there, it doesnt ever boot up. Can anyone shed any light as to why its doing this and how i can fix it?
i have partitioned the SD card and did install it with a goldcard
in the mean time im gonna flash back to a non app2sd rom
anyone know why it might be doing this? it just hangs on the white htc splash screen straight after powering on
gyro11 said:
anyone know why it might be doing this? it just hangs on the white htc splash screen straight after powering on
Click to expand...
Click to collapse
If you are stuck in a boot loop, then like you suggested, it's most likely because you have not partitioned the SD Card.
You only need to create a Gold Card if your phone is software branded and is running a non-generic rom.
but ive rebooted the phone with a partitioned SD card and that doesnt work...Does the card i install App2sd need to be partioned?
gyro11 said:
but ive rebooted the phone with a partitioned SD card and that doesnt work...Does the card i install App2sd need to be partioned?
Click to expand...
Click to collapse
You replace the Gold Card sd card with your normal sd card. Then in recovery, you need to partition your SD card, this is for the benefit of allocating extra space with the ext partition, which is used specifically for the installation of App data.
That's why it is recommened to set a 0MB swap, ext2 with 512MB (for apps), and the rest of the partition to FAT32.
Make sure you wipe Factory Reset, Dalvik, Cache, SD:EXT and then flash the ROM. After you have done this and while you are still in recovery (don't reboot phone yet), install Apps2SD zip (only if you are installing a ROM that does not include Apps2SD). Power off phone and then insert your sd card into the phone (not the Gold Card). You then enter Recovery Mode again and partition the SD card accordingly.
ok, but im not sure your understanding (i might be wrong...)
I have 2 sd cards....1 which is a gold card which is NOT partitioned and contains the install file for app2sd
and 1 which is the sdcard i run in my phone under normal operation.
I am ONLY using the non partitioned card to install app2sd. As soon as it is installed i remove this card and insert the Partitioned card
Does this make sense? So i know that a partioned sd card Must be used when running the phone with apps2sd, but do i need a Partioned goldcard just to install it? i can i just use a standard goldcard for the installation (and then put in the partioned card after installation) (note...i am using a goldcard as i have an orange uk desire with a generic rom)
Ah yes i understand you now. Yep, the Gold Card should not be partitioned, only formatted as FAT32. After you have used the Gold Card to install Apps2SD, you then insert the other SD card and partition using that.
-------------------------------------
Sent via the XDA Tapatalk App
ok, so that is how i had it, with the partioned sdcard, but i am still getting the white htc splash screen and not getting any further. Any idea why this might be happening?
im installing it on the 1.21... update
try ext3 , NOT ext2
that did it for me.
rhedgehog said:
try ext3 , NOT ext2
that did it for me.
Click to expand...
Click to collapse
Do you mean to select the option:
SD:ext2 to ext3
as i have already done that and it didnt work
Hmm... strange...
Have you tried repartitioning your sd card? Set the values for swap and ext to zero, then check to see if it boots ok.
-------------------------------------
Sent via the XDA Tapatalk App
MasDroid said:
Hmm... strange...
Have you tried repartitioning your sd card? Set the values for swap and ext to zero, then check to see if it boots ok.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
nope, just tried with these settings and unfortunately still no luck. I even tried it without any sdcard in there at all and still the same result.
Could the radio version have anything to do with it? as (other than the update) thats the only other thing ive flashed to it
gyro11 said:
nope, just tried with these settings and unfortunately still no luck. I even tried it without any sdcard in there at all and still the same result.
Could the radio version have anything to do with it? as (other than the update) thats the only other thing ive flashed to it
Click to expand...
Click to collapse
What Radio version did you flash exactly? I don't think that would cause a problem unless you flashed an incompatible version. Are you running Bootloader 0.75.0000 or 0.80.0000?
I would suggest you flash back to stock Radio and then flash back to stock ROM also, as this will restore the stock Kernel. Then after that, carefully take it step by step and try again.
From the steps you have carried out, it all sounds ok to me. When you attempt this again after returning everything to stock, try a ROM that already includes Apps2SD, leaving you to just partition the SD card (after wiping and flashing the custom ROM while in Recovery).
The rom im using is the rootupdate base (1.15) with the 1.21... generic rom manually installed.
I then flashed the following radio:
update-bravo-radio-32.30.00.28U_4.05.00.11-signed.zip
This is really annoying as im finding myself flashing my phone daily now to get this working. I appreciate all your help but i think now im just gonna wait for a stable release of froyo to come onto the forums and update with that
Thats the stock radio version that you re-flashed so don't see how that would cause a problem.
-------------------------------------
Sent via the XDA Tapatalk App

Stuck on boot (post-A2SD)

Hey,
First, I'd like to thank everyone who's contributed to these forums. I've been visiting often lately and the progress is awesome. And, this is my first post =)
So, I rooted my Desire. Made a nandroid backup using ROM Manager, and started trying different ROMs. I finally decided to go back to the stock ROM, and so restored my backup.
Then I decided to install a2sd. So I booted into AM Recovery, restored factory defaults, and wiped the cache. I then installed the zip from the same menu (r1-a2sd-desire-dalvik-fresh-signed.zip) and proceeded to partitioning. SWAP=0, ext2=384. Then I upgraded(?) ext2 to ext3 (again, from the same recovery menu).
And now, when I reboot my device it gets stuck on the first HTC splash screen. It doesn't even reach the animation. I've heard it takes some time to write caches or something but it's been at least 15 minutes already. Any ideas?
Of course, I know I can always restore my nandroid backup, but I want to get a2sd working.
Ok, first go back to Recovery. Did you wipe the SD:EXT partition too?
Wipe the following:
Factory Reset
Dalvik Cache
SD: EXT
Make sure your card is formatted as FAT32.
You may have to reflash the actual stock rom.
If you can get hold of another sd card, download the stock rom zip and apps2sd zip and place onto sd card using a card reader or another phone that accepts micro sd cards, re-insert sd card into phone, enter recovery, wipe everything, flash stock rom, apply Apps2SD zip in recovery zip after, then partition with 0Mb swap, 512Mb ext2, rest to FAT32. Convert ext2 to ext3.
-------------------------------------
Sent via the XDA Tapatalk App
Just to clarify, when you say flash stock rom, you mean rootedupdate.zip right? (The one used in the rooting process)
UPDATE: Ok, I just did it with rootedupdate.zip but got the same problem. I wiped to factory defaults, wiped the caches, and SD: EXT. Then installed rootedupdate.zip. Then installed Apps2SD, partitioned to your recommended values, and converted ext2 to ext3.
Still, HTC boot logo has been there for a good 10 min. It didn't even reach the animation. I've heard it could take some time to update caches or something like that. Could it possibly take that long?
Lil.Fl0w said:
Just to clarify, when you say flash stock rom, you mean rootedupdate.zip right? (The one used in the rooting process)
UPDATE: Ok, I just did it with rootedupdate.zip but got the same problem. I wiped to factory defaults, wiped the caches, and SD: EXT. Then installed rootedupdate.zip. Then installed Apps2SD, partitioned to your recommended values, and converted ext2 to ext3.
Still, HTC boot logo has been there for a good 10 min. It didn't even reach the animation. I've heard it could take some time to update caches or something like that. Could it possible take that long?
Click to expand...
Click to collapse
Try in this exact order:
UPDATE: Ok, I just did it with rootedupdate.zip but got the same problem. I wiped to factory defaults, wiped the caches, and SD: EXT, partitioned to your recommended values, and converted ext2 to ext3. Then installed rootedupdate.zip. Then installed Apps2SD
shawe_ewahs said:
Try in this exact order:
UPDATE: Ok, I just did it with rootedupdate.zip but got the same problem. I wiped to factory defaults, wiped the caches, and SD: EXT, partitioned to your recommended values, and converted ext2 to ext3. Then installed rootedupdate.zip. Then installed Apps2SD
Click to expand...
Click to collapse
Ok this is driving me nuts. I did exactly as you asked and it reached the same problem - stuck on the HTC boot screen before the animation even starts.
Funny thing is, I tried installing Amer's bravox ROM which includes Apps2SD (after partitioning my SD of course) and it worked! I'm sure it did because I tried installing a few apps and internal memory barely changed, and did the "su ls -l /data" test as well.
I'm just lost now. Btw, I'm not using a goldcard but I can boot just fine into recovery and all, and my device is not locked.
Any ideas? I've attached the Apps2SD zip I tried. It's worth mentioning, I've tried downloading it from quite a few different sources.
EDIT: I have a feeling the problem lies where BOOT is formatted during the Apps2SD installation. Is it supposed to?
I did everything you did in the first post and my desire gets stuck at htc loading screen. I followed the installation guide from here and just realized that it is actually not meant for bootloader .80 http://nimbu.amorvi.com/2010/05/how-to-root-your-htc-desire/#comments
What can I do to fix all these? Help needed urgently
benleong2008 said:
I did everything you did in the first post and my desire gets stuck at htc loading screen. I followed the installation guide from here and just realized that it is actually not meant for bootloader .80 http://nimbu.amorvi.com/2010/05/how-to-root-your-htc-desire/#comments
What can I do to fix all these? Help needed urgently
Click to expand...
Click to collapse
That post only says the rooting procedure is different for .80, not Apps2SD.
Like I mentioned before, I'm not sure what the problem is, but ROMs with Apps2SD built in work just fine, so that's what I'm doing.
Lil: In the past, Ive tried the a2sd file you attached and I was also not able to boot past the HTC screen so I just used MCR 3.1 with app2sd+.
You may want to try flashing the ROM with a gold card. I have an unbranded Desire and I need to use the gold card when I rooted or need to re-flash to stock. HTH.
amf said:
You may want to try flashing the ROM with a gold card. I have an unbranded Desire and I need to use the gold card when I rooted or need to re-flash to stock. HTH.
Click to expand...
Click to collapse
You mean reflashing rootedupdate.zip with a gold card? Because I remember trying without one, and it didn't work. Then I tried with one, and was a hassle. Tried again without, and it did work. So I'm guessing I might've missed something the first time I tried without a gold card..?
But from what I understood, it doesn't matter. As long as you're rooted you don't need a gold card, and the rooting process either works all the way or doesn't at all. Did I get something wrong?
And, just to make sure I understood you right, using a gold card should allow me to use the zip above?
If I remember it correctly, I copied the ROM I'm flashing to a gold card and used that card to flash the ROM.

Un-partitioning SD card?

Hi guys,
I couldn't find anything about this (I did try searching before posting this thread, so I hope I am not repeating a common question!).... I wish to unpartition my sd card and just go back to a normal fat32 partition....
So far I have tired windows disk management and Rom Manager, which just allows you to ADD a ext partition with no luck!
Can anyone else guide me how to achieve this?
Regards!
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
cargobr151 said:
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
Click to expand...
Click to collapse
:O Thanks, which recovery should I be using? :s
System recover? clockworkmod using the fake flash method? because I don't see the Partition SD Card menu anywhere else and i've tried both!
I know its right in front of me somewhere, I just can't see it, D'oh!
use the one from rooting folder
Bah,
I ended up using GPart live cd to undo it!!
Thanks for the responses guys, hopefully this will help someone else who needs it!
cargobr151 said:
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
Click to expand...
Click to collapse
Sorry for using your thread, however I don't have that Partition SD Card option on my Desire, when I go into recovery?
jacobtc said:
Sorry for using your thread, however I don't have that Partition SD Card option on my Desire, when I go into recovery?
Click to expand...
Click to collapse
That's fine, it's why I created the thread!
If you just want to partition you can use ROM Manager (but this requires root)
you need the recovery file (entitled 'pushfiles' or something) from the risk-free root package to partition/un-partition the card.
Else, you can use a GPart live CD, which makes it really easy!
Hope that helps buddy...
r5ingh said:
That's fine, it's why I created the thread!
If you just want to partition you can use ROM Manager (but this requires root)
you need the recovery file (entitled 'pushfiles' or something) from the risk-free root package to partition/un-partition the card.
Else, you can use a GPart live CD, which makes it really easy!
Hope that helps buddy...
Click to expand...
Click to collapse
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
However in recovery, when I try to mount sd-ext it fails to do so Don't know why...
jacobtc said:
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
However in recovery, when I try to mount sd-ext it fails to do so Don't know why...
Click to expand...
Click to collapse
If you're using a2sd+ then you need to change your ext2 partition to ext3, Also, I don't believe that you need a swap partition anymore...
Try that!
r5ingh said:
If you're using a2sd+ then you need to change your ext2 partition to ext3, Also, I don't believe that you need a swap partition anymore...
Try that!
Click to expand...
Click to collapse
Cool, now I can mount the ext partition in recovery! Thanks!
jacobtc said:
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
Click to expand...
Click to collapse
Was that a 16gb card or a 265gb?
Sent from my HTC Desire using XDA App
GANJDROID said:
Was that a 16gb card or a 265gb?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
lol, lets give the guy a break.... we all know it was a 256GB Flash card!
Anywhooo, I have another question, so I think i'll hijack my own thread!
Guys, whats the most efficient way to backup/restore and move apps between roms? I've ended up manually re-installing installed apps 2/3 times now, I was going between roms that did/didn't support a2sd. Also, should there be any consideration to any specific backup options available in the various tools?
Thanks in advance!
Hi, my phone got bricked using GPart live to turn my ext 2 into a 3 partition. Everything went fine using the program, turned off Usb storage, went into market and tried to download a program, when it started to install the screen when black.
Now I cant boot with sdcard in, I don't come past the white HTC screen
Without SDcard it starts loading the system but the loading is a never ending loop.
Tried to format SD with fakeflash, dosent help
Tried reflashing my rom with wipe and everything, dosent help
Any ideas?
prove said:
Hi, my phone got bricked using GPart live to turn my ext 2 into a 3 partition. Everything went fine using the program, turned off Usb storage, went into market and tried to download a program, when it started to install the screen when black.
Now I cant boot with sdcard in, I don't come past the white HTC screen
Without SDcard it starts loading the system but the loading is a never ending loop.
Tried to format SD with fakeflash, dosent help
Tried reflashing my rom with wipe and everything, dosent help
Any ideas?
Click to expand...
Click to collapse
I would say, firstly try to get your phone working by wiping it clean and re flashing the rom. Use a different memory card just to get up and running. Then you can concentrate on fixing you card..
Although that seems like a very strange issue, are you sure you formatted your card correctly with GPart? (eg, exactly 512 MB/1024MB?) I'm a n00b myself so I would also wait for some of the more experienced users to offer their input. lol
r5ingh said:
I would say, firstly try to get your phone working by wiping it clean and re flashing the rom. Use a different memory card just to get up and running. Then you can concentrate on fixing you card..
Although that seems like a very strange issue, are you sure you formatted your card correctly with GPart? (eg, exactly 512 MB/1024MB?) I'm a n00b myself so I would also wait for some of the more experienced users to offer their input. lol
Click to expand...
Click to collapse
Solved it by using AM recovery, repair + new partition solved the problem! Gonna reflash 2.0 again since i messed up the wiping somehow and then keep this until the rooted 2.2 is out!

[Q] LeeDroid 2.2d No boot with SD

I just updated to LeeDroid 2.2d with A2SD+ on Sunday. Everything was working fine until this afternoon a bunch of apps popped up with an error at the same time. After force closing them I decided to reboot the phone. When rebooting, it never got past the HTC screen. I pulled the battery and tried a few times with the same result. If I remove my SD card the phone boots and and everything works (except the apps on the sd). Is my SD card defective? I can still see some files in recovery mode, but I cant find the LeeDroid zip that I used to flash the rom.
Phone: HTC Desire A8182
S-On
HBOOT 0.83.0001
Radio 5.10.05.23
Any help is much appriciated.
Thanks,
Jordan
You could try formatting SD External and wipe everything else and reinstall LeeDroid. Do this if you're really sure. Shouldn't be a problem.
Hope this helps
Hi,
I had a similar problem a few days ago although the circumstances leading up to it were a little different from yours.
I had developed a bad habit of just popping out the battery without powering off to change sim cards. On one of those occasions the phone would not reboot past the HTC screen. I guessed that I had corrupted something so checked the SD card first as this was the easiest to do. The FAT32 partition was OK but the EXT3 partition had become corrupted.
I just reformatted the EXT3 partition. Afterwards the phone would boot up correctly.
Hope this helps,
Matt
Thanks for the help. I can read the fat32 partition fine so I'm guessing the ext3 partition it corrupt. How can I reformat ext3 without Rom manager?
Thanks
Jordan
Sent from my HTC Desire using XDA App
If you are using the ClockworkMOD recovery, it's hidden in the advanced menu.

[Q] HELP Runnymede AIO Black screen

Ive installed this rom twice and on the 1st or 2nd (im not sure ) i get a black screen. Does anybody know how to fix it ?
vinsta11 said:
Ive installed this rom twice and on the 1st or 2nd (im not sure ) i get a black screen. Does anybody know how to fix it ?
Click to expand...
Click to collapse
Please mention the steps u followed while installing the ROM in details?
Do u have a 512+ MB ext4 partition on ur SD card? If you have, then check whether properly partitioned ur SD card thru 4EXT recovery or something.
Ermm I was on another 3.5 sense rom so i decided to flash a different one but my ext partition was too small. i then used partition magic to format and then create a 1gb ext4 partition i then wiped everything and flashed the rom and all i got was a black screen. I wiped the sd card again and formatted it again and put the old rom back on and it didnt boot it just force closed everything so I formatted the card AGAIN and then tried the old rom and it worked. I dont know what im doing wrong ?
Partition your SD card for 1GB ext4 using GPartedLive or 4Ext recovery. You can even check the alignment and health of Fat32 and ext partitions through 4Ext.
Do a clean wipe before you install this.
Stock hboot or CM7/r2?

Categories

Resources