Some of you guys might share one issue that I have with my blackstone device:
when waking up the phone, the unlock-slider remains unresponsive for two or so seconds. Thanks to edwardandtubs this has been resolved now. There's a simple registry value that needs to be changed in order to make the unlock-slider response immediately after waking up the device.
That key is:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]"FirstCalibration"
Change the value from "1" to "0", softreset and you're done. Or download the cab I made, install it and softreset your device. It will change the registry entry for you.
According to edwardandtubs it's best to softreset the device by using the stylus and the softreset button on the back of the blackstone rather than softresetting it via software..
Can confirm this works with EnergyROM 23569 Sense 2.5 May 16th Co0kie's Home Tab
Thanks dkp1977
hi,
i have hd with 6.1 stock rom ...
i have battle ,when i make a phone call ,to unlock it.
the lock icon , remained unresponsive and i had to keep on pressing..icon.. two or three times to get response...!
( problem is ...my phone is set by me, to turn off screen ..also i have a tweak ..to lock screen on top of that )
with this reg . tweak ,i hardly touch icon and it unlocks ..!!!!!
no delay ...
working really smooth ,
thank you for sharing
willcor
Amazing stuff, this has been a niggly bug for ages. Many thanks
further to my above post,
i have also notice .......
when i " wake " phone from sleep and unlock it ..
there is... no lag on the homescreen and homescreen response, is immediately and very smooth .......!!!
this reg. tweak should also be in the
xda wiki - hd
" tweaks ,tricks and tips for your blackstone...!!" section.
thank you ..again
willcor
The guys who came up with that reg tweak deserve your props, mates. I just made an installable cab.
Just need a slider tweak that works nice and fast for htc sense on the blackstone, that can lag big time at times
This is what I've been looking for. Awesome. I'm gonna test it right now.
Must admit, I thought I thought it was just my HD being bloody slow off the mark.
But just installed, and that's sooo much better
Much thanks for this little one
cab is not working for me, using Energy.BLACKSTONE.23569.Sense2.5.Cookie.Jun.06.Release2. Tried again after hard reset, same result.
but the manual way, i.e. changing the reg in regeditor works. anyway, thank you! credits to you for sharing and to the one who performed the magic
Related
@all,
!!!PLEASE KEEP THIS AN INFORMATIVE THREAD!!!!
being part of the tester team, I feel we should collect findings in here, rather than in the "old version 4.0"-thread!
so here we go:
- no problems on my hero (german mdaciii, without wifi)
- no touchflo integrated ( or am I blind?)-- SOLVED
many thanx
thormdac said:
@all,
being part of the tester team, I feel we should collect findings in here, rather than in the "old version 4.0"-thread!
so here we go:
- no problems on my hero (german mdaciii, without wifi)
- no touchflo integrated ( or am I blind?)
many thanx
( @tom:should this not be in your intrest, pls. let me know-I will remove thread in this case )
Click to expand...
Click to collapse
Use finger from the top bar, to the bottom bar
thormdac said:
@all,
being part of the tester team, I feel we should collect findings in here, rather than in the "old version 4.0"-thread!
so here we go:
- no problems on my hero (german mdaciii, without wifi)
- no touchflo integrated ( or am I blind?)
many thanx
( @tom:should this not be in your intrest, pls. let me know-I will remove thread in this case )
Click to expand...
Click to collapse
Touch Flo enable = Simple do a slide from top toolbar on the bar down to the buttom toolbar
Cheers..!
where is the new romm 4.1 for download? please, thanks
@imstill,
Deleted to keep as an information thread only
@tom,
btw.: device information displays rom version as v4.0wwe
thormdac said:
@imstill,
believe me, I am definately NOT blind. (thanx for your comment here)
@tom,
I have investigated more than once: no touchflo nowhere to be found! neither under settings, nor in programs or elsewhere!
btw.: device information displays rom version as v4.0wwe
Click to expand...
Click to collapse
Hey thormdac my friend..!
[email protected] only Joked.Hope u understand.I update support Touch Flo cube not button.
If u don't understand see this video :
http://youtube.com/watch?v=zQBOespJRfU
Cheers...!
and again [email protected] only Joked.U and [email protected] also very good man for me.
I found only two little things:
1- the clock on the top bar is not sinchronized with the htc home clock (when this switch, the first switch about 10 seconds after)
2- every time I make a call the receiver volume is always set at min. also if I set to max.
Anyway, they are not important and Tom is great.
Weehaa... looks great...
I´m really curious about it.
Deleted to keep as an information thread only
Deleted to keep as an information thread only
Deleted to keep as an information thread only
More Findings
1. Touchflo works well without the hardware button...when you finally find it
2. No obvious signs of the auto vibrate sound profile issue, either when adding an appointment or when an appointment come around. Haven't tested the auto profile yet though - just enjoying not having to turn my system sound back on every five minutes
3. The camera seems to work quickly and properly - nothing new or sexy to it, but working is sexy enough for me
4. The touchflo cube config module is better and slicker
5. It feels more stable and a bit faster - highly subjective, I know
6. I thought I had a few issues with ActiveSync at first - dropping connections, USb device not recognised -but that seems to have settled down
7. I haven't yet found anything I could describe as a bug but I'm still looking
Tom's done a very good job here - good work fella! He copped a little unfair flak around 4.0, as did the testers. This is not a commercial release - it's what you want to make of it. If you don't like it, or it doesn't work it's no-one's fault, just your tough luck. That's the risk you embrace when you move off of the OEM ROM. If it doesn't work don't donate - it IS optional - and use a different ROM.
This will do nicely for me in the meantime.
I don't make it for "Donate"
For all : I don't make it for "Donate"
Remember i make it for us.And make it because i like this work...
Have people donated to me and said.He already donated and tell me need share link for him.
I don't want share link because this only beta version.Still have bugs.I need test and Fix it before release v4.1.My Rom always free for all people like my Rom.Donate to me if u like my work, don't donate and tell i need make.. ect ect..
Please understand me...!
thormdac said:
where i come this is also making fun of people!
may it be as it is, I feel like closing this thread--it wasnt ment for gossipping around!
Click to expand...
Click to collapse
You have PM
just a suggestion
Hi tom... everything goes well and works ok except that phonepad input problem.. bythe way i have a suggestion to the cube enabling process.. as far as i know in the actual HTC touch the cube is enebled when your slide the finger from top to bottom.. I think you have reversed it .. in this rom and the previous one exit is by this method.. If you can modify this setting easily can u update in the final version... If u cant also no problem as this rom is great.. Keep up the good work....
cheers and good luck to your studies...
Hi all
AFter install tomtom software whit tomtom Home the button 1 is set whit tomtom.I have copy touchflo.lnk from /windows/applauncher to /windows/startmenu/programs (this file is hidden) and set button 1 for start touchflow now
tnx tom
infido said:
Hi all
AFter install tomtom software whit tomtom Home the button 1 is set whit tomtom.I have copy touchflo.lnk from /windows/applauncher to /windows/startmenu/programs (this file is hidden) and set button 1 for start touchflow now
tnx tom
Click to expand...
Click to collapse
Any question........
if settings/connections/Usb to pc/ Enable advanced network functionality is check my activesync not work
sorry i have solve this problem of drivers on my pc
I just want to say, I would help Tom if I could. My B&B4.0 works still fine.
diego1810 said:
2- every time I make a call the receiver volume is always set at min. also if I set to max.
Click to expand...
Click to collapse
definately cant confirm this! running smoothly here!
One issue,
not Rom related (i think)
installed TCMP 0.72 RC1 and FlashVideoBundle.
When going to www.youtube.com.
Explores hangs.
But it is the only issue i could find
Till now i have found just about everything in xda! Even a similar thread for the same problem but no solution at all!
Thing is, my hd takes too long to wake up for an incoming call..resulting in missed calls all the time..Ring starts in about 3,5 tones..!!! It wakes almost instandly (backlight) but it takes a lot of time to draw the picture etc and THEN starts ringing..
[i am on MIRIS V18 wm6.5, using the default WM dialer with the sliders (not htc's one!) and csdev for autolocking after wake up]
I had similar problems in many roms, even 6.1 .. with the fastest one being 1,5 tone then ring.. Its allready too long for me! I have tried some tweaks, i am not using mp3 for ringtone, using instant ring from hdtweak and no ring delay setting etc..still no luck..
What can be done? I know that many users have the same problem, even with stock roms.. Its same for such a device to be able to do everything sooo sweat but not the phone function!!
So any special tricks?? (font, gdi cache etc settings?) i heard that with sktools and advanced configuration tool etc you can do actually much about that!
Feel free to post your experinces as well, hoping that someone can provide us with a solution or a worthy workaround..!!
I've got the same problem, always have to call people back. Mostly takes about 5 seconds before the answerbutton works, while ringtone is already pissing off the other passengers in the bus
I still think the slow buildip is caused by Wisbar Advance, I used the HD Tweak aswell.
Very Good POST yes you are right many peoples have the same problem i have the same problem!
So i try with HD tweak "Ring without delay" i try with Advanced config and etc Again the same really when someone ring me no matter from the ringtone or anything the phone start ringing after few seconds!
I make few test and what i saw is that if the phone is sleeping when someone call you take longer your phone to wake up and ring
then i try again with no sleepy phone, again ring with delay so i can say if the phone sleep he need few seconds to ring like 5 seconds if the phone not sleep he need 3-4 seconds But at all This is serious problem and maybe is time we to fix this!
I don`t see any point this device to be able to do so much things and we always to Upgrade them but the phone function that we use everyday to make us troubles!
I have this problem with the stock room when the phone was brand new, after i flash the phone with Davideuck V 5 have the same and now im with Davideuck v7 and again is the same ! so no matter what kind of room or radio version you use this problem is real... and really the phone ring with DELAY
Will be perfect if anyone can find desigion of this problem and our phones to start ring immediately without any delay !
Thanks
I have been struggling for months with well-known this 2-sec (far more than this !) delay. The HD tweak didn't work for me either. Furthermore, it has been reported that even if this setting is changed, it is self-reset after a soft reset !
The only solution I found is replacing the HD Caller ID with the WM default one. It is very ugly compared to the modern HTC one, but now my phone takes only 1 sec to respond, that is, wake up, show the Caller ID screen and start ringing.
This replacement can be done from the settings of the HD tweak.
Please let me know if this works for you ! I'm running stock ROM.
Yes if we use the default WM dialer the PHONE is very very fast and ring without ANY delay but its very UGLY so maybe the problem is in the dailer!
Like i say no matter what room you use yes its the same for me with the default WM and the phone just think faster than me
Maybe some programers must to chek this out why this heppand maybe the HD dialer is too heavy?
Yes,thats true! But i am using wm dialer, not htc's one!! Still far from fast..(although i am on wm 6.5 where the default wm dialer with the answering sliders looks awesome, its buggy and slow as hell..[because it needs that the phone is locked in order to run so])
So as i asked around in a major greek forum i have found out that 99% of hd users have the same issue! [that 1% doesn't give a s&@t !]
Here too..What can we do about it..?I am starting to think the 1,5 tone delay as acceptable value..[told you i am on 3+ right now!!] Does anybody know if windows 6.5 that lock with external programm [like csdev] on wake up take normaly so long? Ideas...?
it's always not a good idea to fresh new rom too often
coolmicko said:
it's always not a good idea to fresh new rom too often
Click to expand...
Click to collapse
That has nothing to do with the problem man..!
If we could find a way to minimize the load on wakeup!! (so the hd has nothing to load more than the phone function!)is it possible?
Like i told you with the default WM dialer with WM 6.1 the phone ring without delay and is like every normal phone so this mean that the problem is in the dialer..
I think that the HD dialer is too heavy or buggy and this is the reason why take so long to wake up.. the phone!
Maybe some programers must to chek this out what is the diference betwen the default WM dialer and HD dialer we all know what is the diference.. but i mean the diference not how they look like how they are made and all other litle codec files..
So maybe we can find solution to update the HD dialer to be fast as the default WM one..
No matter you are with WM 6.5 and etc.. because till the problem is not solved no matter what room you will use the dialers will be the same made from the same files..
to resolve this we need to know what exactly is the problem to be able to fix it!
Like i say i think that we can find answers in the DIALER but im not programer..
this is very true and this is a very good post gonna supscribe to instant email about it right now ... i think the problem is not only in the dialer i have a stock rom and i had the problem since the very first day but i got a greater delay after installing spb pocket plus while i am not actually using manilla anymore and even a greater delay after installing wisbar advance 3 ... maybe the solution would be in the processor priorities i dont know
So far, i haven't found any solution .
I already made the same post a few months ago :
http://forum.xda-developers.com/showthread.php?p=3902624#post3902624
there's got to be a way guys!!
Some time ago, both sides recording was a total NO(!) for htc devices!! They say it was HARDWARE ISSUE and nothing could be done!(for over a year+) Then .. ICR and..voila! We even got tmc now! !
Is it possible to have the slugiest of all phones?? no way!
I think is a question of time we to find solution for our problem with the phone ringing delay!
Managed to get it to 1,5 rings in the same situation!( as i described before, no rom change etc..i was on 3,5 + rings remember!!)
I installed advanced config tool and played with the phone and performance settings.. performance almost set to max values..(font cache etc..)
Phone settings no delay, end key delay from 3000ms to 0 etc..(there are some settings there, so be sure to know what you are doing or backup first!)
Think i can get it to 1..!which will be extremely fast from what i experienced so far!!
Note: the improvements are for the second+ call after a softreset! The first one is ALWAYS slugish!!
Hi kostasalfa,
Mind posting your Adv Config settings? Thanks.
After long... long search I found maybe a solution:
HKCU\ControlPanel\Sounds\RingTone0
Script value to av0pr
I'm going to test but it seems the true way ^^ (thx to AX3L)
D'rath
Ok .. not a "true" solution but got INSTANT ring! (before the end of the first tone!!)
As i said i was on wm 6.5 using the kinda buggy default lock etc...After my advan.config setting which was an improvement i did the following! Stopped csdev and so the deafult lock! I did go back to S2U2 !! (warning,important: set delay after wake up to 300 or better 400 ms!!) And then i tried resco contact manager!(again!) But there is a new beta free for all of you in their forum!( http://www.resco.net/forums/ShowPost.aspx?PostID=24957 ) Set it to HANDLE INCOMING CALLS! Soft reset.. and voila!! (install s2u2 in device..resco better in sd!)
As i said..not a true solution but i GOT INSTANT RING!!
DONT FORGET TO USE HD TWEAK TO REVERT TO DEFAUL WM DIALER, NOT HTC;S ONE!!!
Try abd tell me if it worked for you!
i use the new energy rom 6.5 standard hav no problems with ring time or receive any late calls or miss calls u guys must check out the roms before loading them
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
tatou said:
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
Click to expand...
Click to collapse
Good news! Resco did it i think..
(i may try the energy rom as wingtytn suggested but i dont think its a roms issue..Ps:wingtytn try to call yourself from another phone to see WHEN it starts ringing..if you got no issues i would lke to know!you use wm stadar dialer?etc!)
Hey, I know this is already in a thread, but I wanted to get it out to the masses as there is alot more chance of someone being able to help me this way...and my problem is really buggin me!
Cheers guys!
Quote:
Originally Posted by bmanashe View Post
Anyone else notice how slow the keyboard is on the new updated kernal rom (6.5.1 a)...also, cant double tap to zoom in opera!! Great great GREAT rom, but annoying problems that make me wanna revert back to 6.5q!! any fixes anyone? anyone kno an ezinput version I can change to to solve this problem? or an opera registry fix to allow double tap to zoom??
Cheers guys....
You change the repeat rate from registry
\HKCU\ControlPanel\Keybd\RepeatRate default 8->4 (or less)
Had no probl. w. double tap to zoom in Opera. You can check the Opera setup with about:config from your browser
bmanashe said:
Hey, thanks for your speedy reply!! if it were not for people like yourself my diamond would be a very dull device indeed!!
Right, I changed the repeat rate and tried from 4 to 3 to 2 right down to 0 and it seems to have no affect on my problem...for example, on my older builds, if i repeatedly pressed '.....' it would input the dots for however many times I pressed the button into my text, even if it did take a few seconds to catch up...now wen I write a text or somethin, i have to wait until the last letter I have pressed is on screen before I can enter a new letter...if I type too quickly, it misses out loads of letters until it feels ready to recieve a new one...before I could just type away and I always knew it would catch up with itself and remember what I had pressed a few milliseconds ago!! now I can repeatedly hit '.......' and only 1 dot will appear on screen! i have to wait a second before I press '.' again! same with backspace....i used to be able to hit backspace repeatedly very quickly and delete a whole load of text, even if it took a second to catch up, now I press it several times and only 1 letter deletes!! I have to wait a few milliseconds to press backspace again before I can delete another letter! very very tedious!! any ideas??! its really buggin me, its ruining the way I text and email. its not just the dots or backspace...every letter is the same, so its basically impossible to type quickly... I've tried another keyboard 2! 'fingerkeyboard' which is really nice and looks great, but it does the same thing!! last build (6.5q) worked fine and the same way as my original 6.1 rom.
Also with opera, I had alook at the config options, but could not see an option to enable double tap to zoom! I dont suppose you know a registry tweak for that aswel do ya??
Looking forward to your reply!
Kind regards
Ben
Click to expand...
Click to collapse
Can any1 help??! is no-one else that upgraded to Bsb 6.5.1 A/S finding that texting is slower??! its not just the keyboard tho...I notice even when I'm scrolling in Opera or through my list of programmes, I flick my finger quite fast (Like I used to on the other roms) yet the screen does not keep up like it used to!! It gives me the vibration feedback on every finger stroke, but only scrolls if I move my finger abit slower!! someone who upgraded must have the same problem??! plz help..there must be a registry tweek out there sumwhere to increase the reaction speed of the screen..??
Ok first off searched for a day or two and i could not find anything to help the problem that i have with my new tilt2. Its driving me crazy! i went from a touch pro(att fuze) to a tp2(att tilt 2) and the tp2 screen only goes to landscape when the keyboard goes out period, no landscape in photo or any thing tf3d at all. i installed gyrator and that works great in windows programs but not tf3d. Am i the only one who is having this problem? Any help would be greatly appreciated
Thanks
I believe Gyrator doesn't work with TF3D. Try installing changescreen, enabling it (it's not enabled by default) and deleting "manila" as an exception on the exceptions tab. Save your configuration and you're good to go.
add these to your registry:
hkcu\software\htc\htcsensor\gsensor\modulename\
create a string named Manila with a value of \Windows\manila.exe
and
hkcu\software\htc\htcsensor\gsensor\whitelist\
creat a string named Manila with a value of Manila
great thanks alot for the help & i really appreciate it a bunch but but is there any way you can you Dumb it down a little bit for me? Please thanks hahahah
troys5250 said:
great thanks alot for the help & i really appreciate it a bunch but but is there any way you can you Dumb it down a little bit for me? Please thanks hahahah
Click to expand...
Click to collapse
How much more dumbed down can it get?
Uninstall gyrator.
Download this program:
http://forum.xda-developers.com/showthread.php?t=468488
Run the configuration program for it. Go to the exceptions page and select the options you want for Manilla. Save the settings. Soft reset.
troys5250 said:
great thanks alot for the help & i really appreciate it a bunch but but is there any way you can you Dumb it down a little bit for me? Please thanks hahahah
Click to expand...
Click to collapse
Here install this ..
You should try alinging the screen first. Had the same prob . Did what Jack said to the reg to no avail. Then I remembered my 3 yr old jacked my tp2. He pressed his way to the align screen tab. I jus ok'ed out, never finishing the alingment. Then the screen stopped auto rotating. I jus alinged the screen and presto, the tf3d Today screen auto rotated by its self. So try it.
cj_moniz said:
You should try alinging the screen first. Had the same prob . Did what Jack said to the reg to no avail. Then I remembered my 3 yr old jacked my tp2. He pressed his way to the align screen tab. I jus ok'ed out, never finishing the alingment. Then the screen stopped auto rotating. I jus alinged the screen and presto, the tf3d Today screen auto rotated by its self. So try it.
Click to expand...
Click to collapse
It was Jack's reg hack that made my today screen auto aling again and not the align screen utility. Sorry for waisting space.
Hi,
I want to point out, this small (cab) found a rom for HD2 Laurentius26 (Thanks) link: http://forum.xda-developers.com/showthread.php?t=1044596, running on a HD MINI. It allows automatic rotation (landscape). I did tests on the main features of HD MINI, from start menu seems to work well. Obviously does not work perfect on home screen and dialer. is useful to me for example, in the Remove Programs screen.....
As Laurentius26 realized, would be nice to create for HD MINI, a dialer (phone keypad) to insert into a rom cooked .... combined with the cab autorotate.
hi, does it work in the sense? i mean for example in the music tab..does it rotate into landscape same as on hd2?
hi, I tried it now because I did not know if it worked, because I do not use Music tab.
It 'clear that they can not run those programs, which have no skin in the landscape. The CAB autorotate changes the (log system) on the instructions MANILA. I think! but inside 56KB adds nothing !!!!!
In fact, I think, Laurentius26 on ROM FOR HD2 added skins to PHONE DIALER to operate in landscape.
As I have said does not work with all programs in rom: dialer (phone keypad), etc. HOME SCREEN. . MUSIC TAB LANDASCAPE in fact it does not work with BSB Tweaks !!!!!
Do not be hard for something that is given for FREE!
First of all there are already a few threads which specifically discuss about this matter with different apps (Probably around 3).
As mentioned above, the problem does not lies on the AutoRotate app but Manilla itself so unless someone is willing to create HVGA landscape Manilla skin there wont be any landscape Manilla view for our HD Mini.
Considering the low activity of HVGA skin and app development, the chance is slim ....
In fact it is so Ahinigami. I cooked a Rom for hd mini. I'm looking at this work, an application that allows autorotate COMPLETE, to be included in ROM.
(As I said above) I opened this thread with the hope, too, that someone could make a skin for HD MINI laurentis26 as it did, at least for the telephone keypad.
But here it seems only .......... : download and install!
Update
And in fact sometimes life rewards bold .......
I was reminded that long ago I published a thread (TUTORIAL MOBILE MAGIC).
From that folder (attached to the thread) I managed to build a (cab package) and fully functional. I think I continue on this road ....
telephone keypad, is it the usual dialer we're using "cprog"?
If yes, it does support landscape mode ....
I just downloaded the dialer to pack kitchens.
then placed on ROM to HD2. but I just did download.
in the little free time I'm looking for a good rom to join HD mini. Now I'm considering O2_uk
anyway .... and now that I think I can do now a (cab package), if I can send you a private pm
UPDATE:
I understood the potential of HD MINI. I spent a little time,
and I made a special cab for PHOTON. is the dialer pad (telephone keypad) that I said above.
From the first test seems to work fine (I used MOBILE MAGIC) is enclosed SCREENSHOT 2/ 3 / 4. Thanks to Ahinigami to the stimulus.
removed in error
Hi.
Thanks for Auto-rotate
If you create a cab , please upload it ...
If you're planning to cook AutoRotate app into your rom, I suggest using simpler and smaller app specifically just for this purpose.
I've tried the cab you attached in the first post and it was quite buggy (Sense tab is not functioning properly such as alignment) and without any blacklist/whitelist feature.
On the other hand Mobile Magic (Beta) is a rich feature app but comes with larger footprint.
If you've the time, pls do try out ChangeScreen. It has a simple and easy to use interface and smaller footprint.
-----------------------------------------------------------------------------
Btw, if you're planning to include AutoRotate app into your Rom, do you plan to allow just a few selected app such as Shell32 (Start Menu), dialer, and Sense (When possible)?
Some programs are not rotate friendly and will stop working properly once rotated so you should take this into account too.
Hi Ahinigami ,
ChangeScreen I tested (I did not know) but absolutely bad (on my rom). It should immediately crash and lock system. I could not even evaluate the memory usage when this program is resident in memory.
However, I'm working on another program, and I am considering just the memory used, depending on the version used the same program. In fact, the features that I want to achieve are: the fluidity of the graphics, speed, low memory but also the workers!
For the delay on the dialer cab I apologize! Patience!
But I do not eat with it! I do this for a hobby ...... but I also have my job!
For tonight than upload a new thread in the dialer pad and the cab to rotate + tutorial. Afternoon do the last test and upload!!!
I see, take your time .... Having a new developer for HD Mini is a good news itself for me.
There is nothing I can do for you but I could at least help you to try out your new app and rom when released.
Ahinigami Thanks!
is a pleasure for me to be of help! Experience together!
About go to the link: http://forum.xda-developers.com/showthread.php?t=1064807
I hope good news .... for you ..... for you all.
Hola, great work you´re doing here
I´ve been comparing the Mini and the HD2 for a while now, and even though I´ve also achieved to rotate (force rotation) Manila/Sense, it´s not ported to landscape yet (7c60907d_manila, 22e41977_manila, 14394200_manila) and has never been. The fact is that we should have to decompile and mode some of the manila core files for it, assigning in those files the corresponding positions for the elements...
Now, if all you want to do is to be able to rotate everything else, that´s easier since a few reg entries will do that for quite some apps (see L26 rotation cab) OR by using a very simple and powerfull app like xHook or xtask. I use it on both my Mini and HD2 (yep, with Laurentius beta ROMs) and I can rotate "on demand" everything (except sense) by simply assigning the winflag softkey to the rotation of 270 degrees within xtask
Hi BHS_ Interceptor,
Thank you very much.
You gave some very interesting news!
I think it is the right way, ......
In fact that's what I'm trying to implement. From your suggestions, I will try to work .... because I want to get the final result that you wrote above. Well.
oregon69 said:
Hi BHS_ Interceptor,
Thank you very much.
You gave some very interesting news!
I think it is the right way, ......
In fact that's what I'm trying to implement. From your suggestions, I will try to work .... because I want to get the final result that you wrote above. Well.
Click to expand...
Click to collapse
Hola Oregon, glad my post was useful. If there is anything else I can do, just let me know.
Btw, if you simply use the reg keys and also enable autorotate, the behaviour on the Mini will not suffer except on Sense. You would have to add a lot of exe´s to the white list and after installing new apps, some of this would have/need to be added as weel. Using xTask/xHook, you don´t have to worry about white list nor anything else, even about registry, since it rotates on demand what ever and when ever you press the set Key. You can also assign another key for it, but I like the win flag since we already have another one right below the softkey. If you replace the winfla icon with a "rotate" icon" then all looks perfect as well
Btw, on my HD2 (I´m also a member in Laurentius Platinum Beta team) I have assigned the button through the "build in" taskmanager Leo is using for the ROM...