Hi, I´m from Argentina and the thing is that I have no signal, it says No Service in almost everywhere. I´ve been reading some and realized that in here I need the bands 850/1900, is there any way to make it work?
I´ve searched for this but couldn´t find anything
Thanks!!!!!!!
which rom are you using?
which radio rom do you have?
have you checked the phone settings (phone->menu->options->network)? there you can search your available networks and depending on your rom, even set frequencies. in general, the BA supports 850, 900, 1800 and 1900mhz networks w/o problems.
have you tested the sim card in another phone? maybe there really is no reception at your location.
facumastandrea said:
Hi, I´m from Argentina and the thing is that I have no signal, it says No Service in almost everywhere. I´ve been reading some and realized that in here I need the bands 850/1900, is there any way to make it work?
I´ve searched for this but couldn´t find anything
Thanks!!!!!!!
Click to expand...
Click to collapse
Nice to see another Argentinean in the site (I was feeling alone for a moment )
It could be that your SIM card is not working properly. Also, try to soft reset and see if that solves the issue (it could be that you removed the battery and the radio drivers didn't load back up).
hi, the sim works great. I´ve traid lots of radios and roms.
I thought I was the only one from Argentina
Your ba works ok? can you upload the rom and radio you´re using? please? I´ve tried everything
thanks!!!!
both the rom and the radio stated in egz's signature are to be found in my signature's download collection.
facumastandrea said:
hi, the sim works great. I´ve traid lots of radios and roms.
I thought I was the only one from Argentina
Your ba works ok? can you upload the rom and radio you´re using? please? I´ve tried everything
thanks!!!!
Click to expand...
Click to collapse
I am not in Argentina, but rather from Argentina
Do what Chef says, as he mentioned both radio and rom are there.
ok thx you both, but I thought that worked in Argentina.
Is there any tool I cna use to set up the bands I need?? I´ve tried a cab called bandsel_bwwa on wm2003 and it only lets me choose 850 Or 1900 and another one that did let me choose 850/1900 but it didn´t work. Maybe the radio version? I have the 1.13.00.
Thanks again for the help
facumastandrea said:
ok thx you both, but I thought that worked in Argentina.
Is there any tool I cna use to set up the bands I need?? I´ve tried a cab called bandsel_bwwa on wm2003 and it only lets me choose 850 Or 1900 and another one that did let me choose 850/1900 but it didn´t work. Maybe the radio version? I have the 1.13.00.
Thanks again for the help
Click to expand...
Click to collapse
You should be able to go to Phone\Settings and in there I believe that there should be an option called "Network Options" or "Network Tools". Roam around there for a bit until you get to band selection. Sorry I cannot give you more specific instructions, but I honestly don't remember. This should be set to automatic though...
Related
Hi,
My XDA1/T-Mobile PPC is on the XDA Developers SER 1.2 ROM and it has utility wherein I can change GSM mode from GSM900 to GSM 900/1800 to GSM 1900. I recently upgraded through the T-Mobile WM2003 ROM and Radio exe file. Now, I wish to have that utitlity again becuase now I am in asia and it is practical to have the GSM 900/1800. But I am also been goind to the US from time to time so I don't want to lose the 1900 BAnd. Is there a utility somewhere where I can change band?
I saw somewhere that I can change band via the bootloader: I am not familiar with the bootloader can somebody tell me how to change my band to 900/1800? Is it easy if I want the 1900 band back beacuse I'll be going to the states in a months time, and after that I will be back in Asia again (so I have to change to 900/1800 again). Pls help. Thanks.
BTW my device information is as follows:
Hardware Ver. PW10B1
ROM: 4.01.16 ENG
Radio: 6.25.02
try changing which rom you have, maybe that will change the band
Changing Bands
Try,
:arrow: http://wiki.xda-developers.com/wiki/ChangingBandsWithBootloader
Hi,
If your device is B type, that means it's 900/1900 MHz (plz refer to the rear sticker and don't rely on the device info data!) ... so, in Asia you are stuck with 900 MHz ... anyway, changing the band from the bootloader is not that safe action ... some times it make the xda hang a need a many hard reset actions to get back.
I would advice you to get XDA II which is tri-band by design.
The latest official US T-Mobile ROM v4.01.16 still allows the bands to be switched within the OS, whereas with the latest official US ATT ROM vA.30.09 said to be able to switch automatically.
Thanks for the replies. So it is not recommended to switch bands with bootloader?
reydiodj: What do you mean by switching bands within OS? Does that mean I can still get 18000 frequencies?[/b]
thanks for the replies. No need for me to change the band, my device already works perfectly now.
I have a serious problem . I have t mobile hermes unlocked and it has schaps latest rom on it 3.57a When i put my simcard in it it reads the simcontacts and the sim menu but it keeps on searching for signals....Any body know any solution?
plz some1 help mee
Wat is your radio version?
TripleQ said:
Wat is your radio version?
Click to expand...
Click to collapse
Oh i forgot to mention i have 1.50 radio
Well, to help you we will need some information... like...
Did it ever work for you?
What radio ROM version did it work with?
What OS version did it work with?
Did you do the flashing?
Basically, anything that might help us, will help you.
todd_jg said:
Well, to help you we will need some information... like...
Did it ever work for you?
What radio ROM version did it work with?
What OS version did it work with?
Did you do the flashing?
Basically, anything that might help us, will help you.
Click to expand...
Click to collapse
I bought a new hermes and since then i was using my sim which is still working perfectly on all roms and all os but i have changed my network now and simcard of new network doesnt get signals although i can open sim menu and sim contacts...
So i dont know whether it an os prob or a radio prob....
I have a tmob hermes and it was unlocked i dont know whether it is a problem in unlocking....
Even the telenor sim refuses to work
All sims are 32k
Hope i have provided enough info
max414 said:
I bought a new hermes and since then i was using my sim which is still working perfectly on all roms and all os but i have changed my network now and simcard of new network doesnt get signals although i can open sim menu and sim contacts...
So i dont know whether it an os prob or a radio prob....
I have a tmob hermes and it was unlocked i dont know whether it is a problem in unlocking....
Even the telenor sim refuses to work
All sims are 32k
Hope i have provided enough info
Click to expand...
Click to collapse
So, you took out the sim (and all was working).
Then you put in a new sim and it did not detect network.
Then you put the old one back and now IT does not detect network either.
is that right? it seems that it cannot be OS or operator issue since this combination of OS/Radio worked before. maybe I have missed something. If it were me, I would just reflash everything.
todd_jg said:
So, you took out the sim (and all was working).
Then you put in a new sim and it did not detect network.
Then you put the old one back and now IT does not detect network either.
is that right? it seems that it cannot be OS or operator issue since this combination of OS/Radio worked before. maybe I have missed something. If it were me, I would just reflash everything.
Click to expand...
Click to collapse
No the old sim is still working fine and and receives full reception but when i insert new sim hermes keeps on searching for network....
Hello any body have this problem?
max414 said:
Hello any body have this problem?
Click to expand...
Click to collapse
Check with ur operator if the new card supported 3G. Yes I know that u can use 2G,BUT some Simcards working NOT on 3G mobiles if they not support 3G
Abo Forat said:
Check with ur operator if the new card supported 3G. Yes I know that u can use 2G,BUT some Simcards working NOT on 3G mobiles if they not support 3G
Click to expand...
Click to collapse
The sim which is working fine wiith my hermes is also 2g caz we dont have 3g in pakistan...and the sim which doesnt work is also 2g.....
wHAT IS WRONG???
max414 said:
The sim which is working fine wiith my hermes is also 2g caz we dont have 3g in pakistan...and the sim which doesnt work is also 2g.....
Click to expand...
Click to collapse
just flashed new schaps 3.54c rom and latest 1.51 radio rom,but the problem is still there...Hermes can register on waridtel but not on other networks ........
max414 said:
just flashed new schaps 3.54c rom and latest 1.51 radio rom,but the problem is still there...Hermes can register on waridtel but not on other networks ........
Click to expand...
Click to collapse
any body in pakistan using a hermes?????
any help?..................
no body have this prob?
Sounds like it is a SIM problem. Does your new service provider lock their SIMs to a particular phone, is the SIM properly activated? Or perhaps a bad SIM? Contact your service provider for a solution.
Max,
Sounds like you don't have the correct operator settings input into the Hermes. Here in the UK you can do this by either using Schaps Tools or finding the correct operator settings cab and running that on your Hermes first.
I would take the advice given earlier and check with the service provider that your new SIM can be used in any unlocked phone.
Once that is confirmed then I would ask them for their operator settings.To find out what settings you need click on Start>Settings>Personal>Phone and then go through the tabs that are presented to you.
Hope this helps.
Oh, by the way, read up on the wiki that supports Schaps 357a ROM. You can glean loads of useful information in there.
Cheers
WB
I think it's likely to be either something that was mentioned earlier (your new SIM might not work in a 3G phone - just because your old network sim works doesn't mean your new one will)
-or-
you could try looking in the phone options to see if the network band selection has been incorrectly selected manually or, select the correct one manually and see if this has an effect. If not, I suspect the operator's SIMs won't work in the hermes.
HTH,
Smiffy.
max414 said:
Hello any body have this problem?
Click to expand...
Click to collapse
thx,Let me make this clear that the sim(ufone) which refuses to work in hermes,I am currently using it in my 3g phone(NOkia 6680)already without any problems and i have already played with schaps tools and selecting various bands from menu but all my efforts were in vain.
Out of five operators in pakistan,only one works fine with hermes and none of other work.....This seems to b very strange as i can open sim contacts,sim messages and sim menu is there as well...and if i search for a network manually it gets the network,but it doesnt get registered on the network..just keeps on searching.
any comments on this?
Please
I need XXJPH
without csc
to keep my 850mhz
If anyone can do for us?
From already thank you very much
*#*#4636#*#* click phone info, click menu button and select select radio band and finally select usa band (that will enable 850 and 1900 for both edge and 3g) or automatic.
Worked fine for me but eventually a CSC file will come out.
decepticon said:
*#*#4636#*#* click phone info, click menu button and select select radio band and finally select usa band (that will enable 850 and 1900 for both edge and 3g) or automatic.
Worked fine for me but eventually a CSC file will come out.
Click to expand...
Click to collapse
It does not work for me only works 1900MHz
and if I put another csc
gives me error
criskelo said:
It does not work for me only works 1900MHz
and if I put another csc
gives me error
Click to expand...
Click to collapse
May want to go back to 2.1 until a proper 2.2 build comes out with the proper CSC then if you are in a predominately 850 coverage area.
I am sure once the leaks start coming out for different regions we will get them.
I had the same problem on the i9000T.
The 850Mhz got disabled with JPH.
I flashed back to an official 2.1, updated CSC and got 850Mhz back.
Then flashed JPH back and retained 850Mhz.
clubtech said:
I had the same problem on the i9000T.
The 850Mhz got disabled with JPH.
I flashed back to an official 2.1, updated CSC and got 850Mhz back.
Then flashed JPH back and retained 850Mhz.
Click to expand...
Click to collapse
Where did you get your ROM at that gave you back the 850mhz? Can you post up the ROM so we can use it? My original i9000T ROM backup got messed up somehow.
Thanks!
Jouten said:
Where did you get your ROM at that gave you back the 850mhz? Can you post up the ROM so we can use it? My original i9000T ROM backup got messed up somehow.
Thanks!
Click to expand...
Click to collapse
Download firmware Canada 850mhz
http://www.samfirmware.com/WEBPROTECT-i9000.htm
criskelo said:
Download firmware Canada 850mhz
http://www.samfirmware.com/WEBPROTECT-i9000.htm
Click to expand...
Click to collapse
does the jph have spanish in swype? i was almost sure it did not (i ask cause you are from argentina, just like me )
EDIT: ok, maybe JP6 was the one without spanish in swype
Criskelo, I have an GT-i9000T, that lost 850 Band.
I flash with the Canada firmware, from WEBPROTECT.
pda:i9000ugjh2
phone i9000ugjh2
csc i9000bmcjh2
but i cant connect with movistar in hsdpa 850mhz. Only Edge
? whick may be the problem ?
Thanks
Here we are, I post the european config files for 850 / 1900 / 2100 network
You can use it on the RUTEM_U3_01.14.2 last deblured rom.
All you have to do is replace the folder in etc/system/
ATT
will those files work on ATT because of the 1900 and 850, or would I need the exact ATT version?
Yep , normaly they will work on ATT network, except for 2100 who is not present on your network. give a try.
If these files don't work , the best thing to do is reflash the original ATT rom or if you didn't change in your original rom,
and backup the frequency folder /etc/motorola/"bp_nvm_default" .
To do this you will need to room your device and pick up the folder with rootexplorer.
but normaly you won't have to do that because of the similar freQ
great!
ok, Ill try this with the newer de-blurred rom, because I can't seem to find the original att rom anywhere, hopefully this unbricks the phone!
nixonpjoshua said:
ok, Ill try this with the newer de-blurred rom, because I can't seem to find the original att rom anywhere, hopefully this unbricks the phone!
Click to expand...
Click to collapse
Here it is:
http://www.megaupload.com/?d=DIDRJSZ1
Please report us EVERYTHING on your AT&T Flipout.
Did you manage to unblur it?
Did you brick it? With which ROM?
Have you tried the modified recovery?
Best Regards.
Is there SBF available for the Rogers Canada branded Flipout?
Sent from my DROID2 GLOBAL
Does anybody have config files for British retail Flipout?
I've flashed RUTHEM_U3_01.14.2(Debranded ROM for Central Europe) which seems to work great, but I have some issues with signal reception I didn't have with the original ROM. I assume the reason is in band configuration, according to and-developers.com, my original ROM used 900/2100 and the new one uses 850/2100. Standard for my region is GSM 900, DCS 1800, UMTS 2100.
Thank you in advance.
GSM 900/2100 Configuration Files
I managed to get these files myself, so if you have UK retail Flipout and you encountered signal reception issues after flashing RUTEM_U3_01.14.2, these configs might help.
question
I from argentina , bands here according to http://www.mobileworldlive.com/maps/network.php?cid=3206&cname=Argentina
are 850/1900, but when i see for example france i found http://www.mobileworldlive.com/maps/network.php?cid=123&cname=France
i found it has 900/1800/2100, can i install U3_01.14.2 with the 850/1900/2100 config file??
thanks for your answeres
dalkor said:
I managed to get these files myself, so if you have UK retail Flipout and you encountered signal reception issues after flashing RUTEM_U3_01.14.2, these configs might help.
Click to expand...
Click to collapse
Thanks for these.
Where did you find them by the way and also are these from the latest uk rom?
Nice one
Acefx said:
Here we are, I post the european config files for 850 / 1900 / 2100 network
You can use it on the RUTEM_U3_01.14.2 last deblured rom.
All you have to do is replace the folder in etc/system/
Click to expand...
Click to collapse
hi,
I just installed RUTEM_U3_01.14.2 and would like to make it support 1900 network too with your conf files, however I can't find any /etc/system folder in my phone, only /System/etc but no bp_nvm folder inside
Where do I put your files ?
UPDATE:
found: /system/etc/motorola/bp_nvm_default/
Waiting for confirmation that this works with ATT...please let me know when someone finds out
dalkor said:
Does anybody have config files for British retail Flipout?
I've flashed RUTHEM_U3_01.14.2(Debranded ROM for Central Europe) which seems to work great, but I have some issues with signal reception I didn't have with the original ROM. I assume the reason is in band configuration, according to and-developers.com, my original ROM used 900/2100 and the new one uses 850/2100. Standard for my region is GSM 900, DCS 1800, UMTS 2100.
Thank you in advance.
Click to expand...
Click to collapse
I noticed the exact same thing, I have a European 900/2100 phone I'm using in Canada. My provider is 1900, so I never had 3G to begin with, but after flashing 1.14.2 my 2G reception weakened and EDGE turned to GPRS. I scared myself enough getting stuck at the Moto screen playing with basebands the first time, I think I'll wait a bit more before I go in for round two
suoko - Did copying these config files over improve 1900 signal? Did you have connectivity at all before, or was it just 2G, but after copying these new config files it is 3G?
kiwikonnections said:
suoko - Did copying these config files over improve 1900 signal? Did you have connectivity at all before, or was it just 2G, but after copying these new config files it is 3G?
Click to expand...
Click to collapse
my network uses 2100 only so 3g worked without modifications. I did this just in case I sell the phone
Hi
I can't fint the folder /etc/system... I looked into /system/etc, but I don't have a folder named GSM...
Suggestion? How can I check if the modded file are working?
Edit:
I'm very sorry! I missed the edit just three posts before mine... I got it!
MGA2009 said:
Here it is:
http://www.megaupload.com/?d=DIDRJSZ1
Please report us EVERYTHING on your AT&T Flipout.
Did you manage to unblur it?
Did you brick it? With which ROM?
Have you tried the modified recovery?
Best Regards.
Click to expand...
Click to collapse
Are you still keeping this file? Can you upload it to another site?
Thanks
heloo there. my issue is not at all related to root or custom roms. its just that i am not able to get any network coverage at many places including my home. but network is good out in the open. also i tried my sim in other cellphones as well. network's great. i had the same issues before rooting the phone. so is there any solution to this???
Switch to gsm from settings>wireless>mobile networks
India has better gsm receptors
gobz said:
Switch to gsm from settings>wireless>mobile networks
India has better gsm receptors
Click to expand...
Click to collapse
i am on gsm network itself. i have no prolems in open spaces. just that i have poor or no network indoors. and when i use the same sim in my micromax a52, the network is very good indoors too....
Whats your Radio version ?
Go to settings>about phone>see under Baseband Version.
wasimk32 said:
whats your radio version ?
Go to settings>about phone>see under baseband version.
Click to expand...
Click to collapse
13.45.55.24_h_3.35.15.31
mrunal.zode said:
13.45.55.24_h_3.35.15.31
Click to expand...
Click to collapse
So,all you need is to flash a newer radio.
you can find it here.
Download Radio_13.55.55.24H_3.35.20.10 version.
You should only use cwm 2.x version to flash this.
hey the update did really help me a little. but not as expected. thanx newayz...