Related
Well, I have rooted my phone with unrevoked it installed the recovery mod 2.5.0.7 and I'm a bout to flash my phone. Thing is though I've been here for a while.
The story goes like this.. Relatively chronological..
I download HBOOT drivers install them on my Windows 7 64bit. I then download and run unrEVOked3, hook up my phone and choose charge only. unrevoked3 does it's thing and everything seems fine. I partition the SDcard with 6,5gb fat32 and 1gb ext4. Then i go into recovery i then go to wipe data/factory reset and chose it. Then i cant find dalvik data at first but i later find it, so i wipe that. Then I chose to install zip from sdcard which earlier moved. The InsertCoin A2SD+ 1.0.9 mod.
It starts up finds the file and starts flashing or so it seems.
It stops, and I cant remember the error message. So, I go searching cant really find anything except the fact that I should have wiped cache partitions also.. So I go back do a full wipe again and run it.
Then I get this error message: ( i tried again with a Cyanogen mod, and i got assert_failed write_raw_image...)
- assert failed: Package_extract_file("boot.img","/tmp/boot.img")
E: Error in /sdcard/InsertCoin_GB_Sense2.1_A2SD+_1.0.9.zip
(status 7)
Installation aborted..
I then find the baadnwz irc and ask for help there.. repartition my sdcard with gparted, and run through it all again...
Same error..
I then notice that CWMR is saying:
E: Cant fint MISC:
E: Cant mount Cache:recovery/command
E:Cant find misc:
E:Cant mount cache:recovery/log
E: cant fin misc:
I ask if this is normal, NO, is the clear answer i get.. so i test different things, new repartition correct sized and everything..
Still same..
Then I go and download the Froyo RUU and install it reset everything (of course i forgot to sync my contacts..) and i do everything from the top root, cwrm and try flashing but the same errors are still there..
So i then create this thread hoping that this error already isnt here after search.. And hoping someone can help me..?
I'm running the HTC Desire on HBOOT 0.93.0001, radio 5.11.05.27.
Worst thing is no matter how many times i wiped the different things no changes were made on the phone, when i rebooted i still got up my original bckgrnd image and everything...
So, what is going on?
It might be worth watching a few vids and reading a few guides. Here's a start http://forum.xda-developers.com/showthread.php?t=1016084. Also, don't worry. I messed up too when I first started to root and flash.
I can't remember what the status 7 error is and how to fix it. Think it's just to re-download the rom and try again.
If you have PVT4 device, you need to use AmonRA recovery.
I guess you're S-ON? If S-OFF try recovery from my sig.
Ironically I have used the tutorial in the development forum.. Used all the videos i could find, except s-off cause i was told i didnt have to do that when i was just flashing a new ROM..
How do i know if i have a pvt4 device?
edit: i found out.. im a pvt4 device..
Then root again, download recovery from my sig unpack .img and choose "custom recovery" in unrevoked and select it.
You can also use AmonRA recovery.
Or if you don't want to root again, S-OFF and flash new recovery in fastboot.
I don't really understand why they made CWM default recovery in unrevoked, people have so many issues with it. :-(
Sent from my HTC Desire using XDA App
spike0209 said:
Well, I have rooted my phone with unrevoked it installed the recovery mod 2.5.0.7 and I'm a bout to flash my phone. Thing is though I've been here for a while.
The story goes like this.. Relatively chronological..
I download HBOOT drivers install them on my Windows 7 64bit. I then download and run unrEVOked3, hook up my phone and choose charge only. unrevoked3 does it's thing and everything seems fine. I partition the SDcard with 6,5gb fat32 and 1gb ext4. Then i go into recovery i then go to wipe data/factory reset and chose it. Then i cant find dalvik data at first but i later find it, so i wipe that. Then I chose to install zip from sdcard which earlier moved. The InsertCoin A2SD+ 1.0.9 mod.
It starts up finds the file and starts flashing or so it seems.
It stops, and I cant remember the error message. So, I go searching cant really find anything except the fact that I should have wiped cache partitions also.. So I go back do a full wipe again and run it.
Then I get this error message: ( i tried again with a Cyanogen mod, and i got assert_failed write_raw_image...)
- assert failed: Package_extract_file("boot.img","/tmp/boot.img")
E: Error in /sdcard/InsertCoin_GB_Sense2.1_A2SD+_1.0.9.zip
(status 7)
Installation aborted..
I then find the baadnwz irc and ask for help there.. repartition my sdcard with gparted, and run through it all again...
Same error..
I then notice that CWMR is saying:
E: Cant fint MISC:
E: Cant mount Cache:recovery/command
E:Cant find misc:
E:Cant mount cache:recovery/log
E: cant fin misc:
I ask if this is normal, NO, is the clear answer i get.. so i test different things, new repartition correct sized and everything..
Still same..
Then I go and download the Froyo RUU and install it reset everything (of course i forgot to sync my contacts..) and i do everything from the top root, cwrm and try flashing but the same errors are still there..
So i then create this thread hoping that this error already isnt here after search.. And hoping someone can help me..?
I'm running the HTC Desire on HBOOT 0.93.0001, radio 5.11.05.27.
Worst thing is no matter how many times i wiped the different things no changes were made on the phone, when i rebooted i still got up my original bckgrnd image and everything...
So, what is going on?
Click to expand...
Click to collapse
try this, we have same problem... http://forum.xda-developers.com/showthread.php?p=16320099#post16320099
Somehow, installing alpharev and s-offing the phone, and then installing a new recovery helped me. Im now running cyanogen 7 om my phone
Hello all.
I have tried to get my phone up and running for the 3 past days now.
I have been googling and trying everything to get it to work.
I am getting AN errors like this one: cant access to system/csc/TEN/system ´.
everytime I try to install official thrue Odin 4.42 using this firmware: S5660XXKTU_S5660XXKTA_S5660TENKT2
Then it boots and goes into revovery
I managed to get enhanced236 working. But then there was a problem with TWLauncher.
I did a factory resett in the phone and then it all got Fu"#% up. Now I cant even wipe data from CWM, nor original recovery
FCC ID:A3LGTS5660
SSN: -S5660GSMH
Hoping someone can help me out.
I am getting this error when trying to install official firmware:
--Appling Muti-CSC --
Cant access to ´/system/csc/TEN/system´.
I cant wipe data, It will freeze or just reboot into recovery again.
____________________
If I root and install CWM (signed_cwm-5.0.2.7-flashablezip-ext4only.zip)
I get these errors:
E: cant mount /cache/recovery/command
E: cant mount /cache/recovery/log
E: cant open /cache/recovery/log
E: cant mount /cache/recovery/last_log
E: cant open /cache/recovery/last_log
Then if I wipe cache theese errors disapears.
But no I cant wipe data(factory reset)
It freezes or reboots.
If I try to install enhanched or another firm it will stopp when wiping data.
If I choose not to format it freezes wfen skipping format and wipe.
Please help...
GizmoPower said:
I am getting this error when trying to install official firmware:
--Appling Muti-CSC --
Cant access to ´/system/csc/TEN/system´.
I cant wipe data, It will freeze or just reboot into recovery again.
____________________
If I root and install CWM (signed_cwm-5.0.2.7-flashablezip-ext4only.zip)
I get these errors:
E: cant mount /cache/recovery/command
E: cant mount /cache/recovery/log
E: cant open /cache/recovery/log
E: cant mount /cache/recovery/last_log
E: cant open /cache/recovery/last_log
Then if I wipe cache theese errors disapears.
But no I cant wipe data(factory reset)
It freezes or reboots.
If I try to install enhanched or another firm it will stopp when wiping data.
If I choose not to format it freezes wfen skipping format and wipe.
Please help...
Click to expand...
Click to collapse
signed_cwm-5.0.2.7-flashablezip-ext4only.zip
wrong recovery!
Stock is not ext4!
use other recovery and errors should be gone
And download cwmext4+rfs
Sent from my GT-S5660 using xda app-developers app
I´ve tried everything..
I dont get what I am doing wrong.
I just tried another recovery ( signed_cwm-5.0.2.7-flashablezip-ext4+rfs )
Flashed stock rom ( S5660XXKTU_S5660XXKTA_S5660TENKT2_HOME.tar) with Odin 4.4.2
Same errors:
Cant access to /system/csc/TEN/system
Can someone please explain in detail how I can get it working.
Dont mind falshing a nonstock rom.
Thanx
GizmoPower said:
I´ve tried everything..
I dont get what I am doing wrong.
I just tried another recovery ( signed_cwm-5.0.2.7-flashablezip-ext4+rfs )
Flashed stock rom ( S5660XXKTU_S5660XXKTA_S5660TENKT2_HOME.tar) with Odin 4.4.2
Same errors:
Cant access to /system/csc/TEN/system
Can someone please explain in detail how I can get it working.
Dont mind falshing a nonstock rom.
Thanx
Click to expand...
Click to collapse
Here's a thread with a lot of info about flashing, including a step by step guide.
X-zone said:
Here's a thread with a lot of info about flashing, including a step by step guide.
Click to expand...
Click to collapse
Thanks but..
I think you forgot the link
GizmoPower said:
Thanks but..
I think you forgot the link
Click to expand...
Click to collapse
Woops! Here it is! http://forum.xda-developers.com/showthread.php?t=2394513
Sent from my GT-S5660 using xda app-developers app
Hi,
im new here and have a problem with mounting the SD card with the recoveries "4EXT Recovery Touch 1.0.0.5 RC8" and the "CWM PhilZ Touch 6.40.7". No error occurs but no storage device is displayed on the computer when connected with USB.
Mounting with TWRP 2.6.3.0 works.
The reason why i want to change to another recovery is that i want to use the Mokee kitkat rom. And unfortunately flashing the rom with TWRP fails (also with the 4EXT recovery)
Error messag with 4EXT:
"set_metadata_recursive: some changes failed
E: Error in /sdcard/_rom/MK44.4-ace-140829-RELEASE.zip
(Status 7)
Installation aborted."
Error message in TWRP:
"set_metadata_recursive: some changes failed
E: Error executing updater binary in zip '/sdcard/_rom/MK44.4-ace-140829-RELEASE.zip'"
However I managed to flash the rom with the CWM recovery but also mounting the SD within the running Mokee ROM fails.
The ROM is great and i want to use it really bad, could anyone give me some advices please, how i could get this work for me?
Thanks in advance.
i just tested TWRP 2.7.1.0 and USB mounting does not work there either.
Anyone else got this problem?
hi guys i don't know if you guys are familiar with this problem ,but my phone booths to recovery mode everytime i turn it on i've tried flashing the enewman file i747ucufne4 stock-rooted-detex.zip but it didn't work it goes as far as
formatting system
,cache,dalvik
extracting system
symlinking
setting permissioms
set-metadata-recursive:some changes faild
E: Error in/external-sd/i747ucufne4-stock-rooted-deodex.zip
(status 7)
installation aborted.
can someone please tell me what i'm doing wrong? in download mode the phone reads
odin mode
product name:sgh-i747
current binary:custom
system status:custom
qualcom secureboot:enable
warranty bit:1
bootloader RPswrev:3
and the clockworkmod recovery installed is v6.0.1.2 can you guys lend some assistance please.
The status 7 error can happen if your recovery is outdated. I believe 6.0.4.7 is the most recent CWM.
Hello,
i just unlocked bootloader and installed twrp and it all went fine..
until i wanted to fully wipe my device, i did this via twrp.
after 20Minuts, nothing happend, the bar was still white and gray (not even a little bit blue)
and it kept stuck on ''twrp formatting data using make_ext4fs function''.
i knew this wasn't a good idea, but i decided to turn off my phone,
and now, everytime when i turn it on on the normal way it just redirrects me to TeamWin in a bootloop.
even if i want to go to recovery mode i keep stuck in that bootloop, so there is nothing i can do right now, i only can stick at Fastboot Mode but nothing else,
Is there any way to fix this problem?
Using ASUS ZENFONE 2 551ML
I hope you did a backup of your system before? Otherwise just download the latest full image:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.174-user.zip
place it on your internal sdcard (via adb push) and then flash it normally with TWRP. Please note that the procedure can take up to 30 minutes, where the formatting is the procedure taking the longest time...
TheSSJ said:
I hope you did a backup of your system before? Otherwise just download the latest full image:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.174-user.zip
place it on your internal sdcard (via adb push) and then flash it normally with TWRP. Please note that the procedure can take up to 30 minutes, where the formatting is the procedure taking the longest time...
Click to expand...
Click to collapse
How to he flash stock rom by twrp?
Download and flash this via twrp http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
Make sure you flash Supersu before you flash the rom.
mr_gourav2000 said:
How to he flash stock rom by twrp?
Click to expand...
Click to collapse
It's all written there...adb push on the phone, flash the zip normally via twrp, wait and done
TheSSJ said:
It's all written there...adb push on the phone, flash the zip normally via twrp, wait and done
Click to expand...
Click to collapse
but i cant use twrp on my phone because its stuck in bootloop, or what do you mean? (english not my main language)
please give me some proper step by step instructions, i would really apreciate that!
thanks anyway your awesome!
Man, I misread your post, sorry...I thought you could boot only into twrp
If you still have fastboot, why not flashing twrp 2.8.x.x?
Code:
Fastboot flash recovery nameofrecovery.img
Fastboot reboot recovery
Otherwise you could flash stock system with this guide: http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
It's a lot to read
wow, that is something really helpfull, there is still hope to revive my phone
i'll let you know how it turnt out xd
thanks alot!!
i fixed recovery mode, so thats already one step further. Oefff @TheSSJ thanks for the help.
But now i get some other problems, when i try to wipe my phone i get the error like ''unable to mount /data'' and ''unable to wipe dalvik''
and all other kinds of these errors, i get the same problem when i was installing rom. isn't there anything or a way to fully wipe all this **** so i can install a fresh rom.
i flashed custom rom and this is error log i get. its all full written down.
E: could not mount /data and unable to find crypto footer.
E: unable to mount /data
E: unable to recreate /data/media folder.
updating partition details...
E: unable to mount /data
... done
E: unable to mount storage.
E: unable to mount /data/media during GUI startup
Full SELinux support is present.
E: unable to mount /data/media/twrp. twrps when trying to read settings file.
E:unable to mount /data
MTP enabled
E: unable to mount /data
E: unable to mount /data
E: unable to mount /data
Installing external_sd/UL-Z00A-WW-2.20.40.174-user.zip ...
Checking for MD5 file...
Skipping MD5 check: no MD5 File found
Device image SKU:
OTA image SKU: WW
assert failed: getprop ("ro.build.asus.sku") == ''WW''
E: Error executing updater binary in zip '/external_sd_UL-Z00A-WW-2.20.40.174-user.zip'
Error flashing zip '/external_sd_UL-Z00A-WW-2.20.40.174-user.zip'
Updating Partition Details...
E:unable to mount /data
... done
E: unable to mount storage.
Failed
Seems you don't have a WW image installed, do you have a CN Software? Then you need another Software of course
what do you mean with ww & cn software?
sorry but im new in this.. but im really interested so can you please explain a little bit?
how can i get this other software! thanks!!!
Where did you buy your Phone? what does the packaging state? WW, CN, TW, etc? These 2 letters must be written in uppercase somewhere, then we will know which software to flash, there is a check where your phone's software is compared to the zip you are trying to flash:
assert failed: getprop ("ro.build.asus.sku") == ''WW''
Which TWRP did you flash?
ohhh yes, i do have CN software Probably, as it is buyed from china.
Where can i find this other type software?
thanks!
colldor200 said:
ohhh yes, i do have CN software Probably, as it is buyed from china.
Where can i find this other type software?
thanks!
Click to expand...
Click to collapse
There you go: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-CN-2.20.40.159-user.zip
I think flashing will still fail though...but pls try first,maybe it'll work
i tryed it, i get the same error :/
Update: i changed from CN to WW.
Because of this i reflashed to twrp 3.0 and it works properly and now wiping shows no problem anymore.
I also got the WW ota zip but dont know how to install that.
Anyway, i tryed to install xaosp rom (even if my ota is still CN)
And it showed no problems at all!
BUT when i tryed to startup my phone it sticks with the asus logo and wont go any further, not a bootloop, it just sticks at the asus logo.
We are Always getting more and more steps further into fixing my phone, thanks for that @TheSSJ were almost there ?
colldor200 said:
Update: i changed from CN to WW.
Because of this i reflashed to twrp 3.0 and it works properly and now wiping shows no problem anymore.
I also got the WW ota zip but dont know how to install that.
Anyway, i tryed to install xaosp rom (even if my ota is still CN)
And it showed no problems at all!
BUT when i tryed to startup my phone it sticks with the asus logo and wont go any further, not a bootloop, it just sticks at the asus logo.
We are Always getting more and more steps further into fixing my phone, thanks for that @TheSSJ were almost there
Click to expand...
Click to collapse
You could try flashing cm13 first and then xosp:
First wipe data/cache
Then flash cm13
Boot up and hope that it works
Reboot to recovery
Wipe data/cache
Flash xosp and maybe a kernel that fits (FlareM?)
Boot to system again
You could try flashing cm13 first and then xosp:
First wipe data/cache
Then flash cm13
Boot up and hope that it works
Reboot to recovery
Wipe data/cache
Flash xosp and maybe a kernel that fits (FlareM?)
Boot to system again
Click to expand...
Click to collapse
sorry for the kinda late answer, but yes i followed your instructions, and it works completely, after cm13 i also immediately installed gapps.
i skipped xaosp im fine with cm13
Thanks alot @TheSSJ for all the help my phone is fully fixed now and even working faster then before its like super fast.
thanks again your great!