I've got my Desire hooked up to my headunit.
It works great apart from tracknames which I can live without and switching albums/artists .
Anyone know of a workaround or setting so you can switch which artist/album you are currently listening too? I'd imagine it would be the Up/Down arrows on my headunit but this doesn't change anything.
Switching tracks works fine btw.
Related
Hey guys, just got my TP2 recently.
I'm using a Nokia BH-503 with them, the 503 worked fine with my Mogul and I was able to control the playback in any program through the buttons on the side (play, pause, next ect.) of the heatset.
With my TP2, I don't have any problem connecting it, but the buttons do nothing - so I can't control the music playback in TCMP for example.
Does anyone have any ideas about what could be causing this?
Thanks for the help.
I'm running Tilt2 default rom.
Just wondering whether anyone else has connected their phone (I have a HD7) to a car kit or similar?
Here's my experience with Parrot Mki9100.
Using the parrot controls:
Most things work. Play and pause work, voice control works either by syncing your contacts to the parrot or by not syncing and then using the phones voice control.
For some reason if you pause the music you cant press play on the parrot kit again, you have to go back into the phone to press play.
Forward and back for tracks works, the skip forward and back doesnt.
Of course you can control from the phone however you want. I'm sad that the promised voice control of the zune interface didnt come through.
But the biggest problem is a slight crackle with the music. It's not a massive problem and I've not used any other devices so it might be that I'm expecting too much of bluetooth a2dp and i'm happy using it like this. But at certain types during songs which have lots of guitar going on you get a crackle.
I was trying to work out if it was the phone or parrot, so i've connected my phone to my laptop, playing music now and the same lovely crackle. Anyone else experienced the same?
Thanks and hope this was helpful to someone
I just connected mine to my car for A2DP as well (Samsung Focus). It streams music fine but my play/pause/skip controls don't work (they did on my WM 6.1 device). I also have the same issue of having to use the phone to resume after a call.
I get the slight distortion as well at HF (just from tweeters). I believe this is b/c A2DP includes compression in the protocol (its not full 20-20k bandwidth). Its only on a few songs for me and something I can live with.
I am experiencing the same thing. However, the bluetooth stack on wp7 is way...way better and works with parrot better than any of the previous wm versions.
does anyone know of any models of car stereo that you can hook a g2 into and control the g2's music player (or that has a corresponding separate music playing app that is controllable at least). i'd like to be able to hook up my phone by usb and then use the deck controls (or even better the controls on my wheel) to skip forward / back / pause, etc.
i've been searching and everything says "ipod/iphone" compatible and nothing mentions android. at best they say that the music will play thru via usb, but not whether or not you'll actually be able to control the music too.
thanks for the info
Dave
The Desire Z works with all (the) cars (I have tried) that have Bluetooth. You have to switch to BT Audio not just BT Phone, but then the controls work just fine.
Pretty much ANY USB automotive HU will work fine. It does NOT play music through the USB as fruitjunk does though... you plug the phone in, enable MASS STORAGE MODE, and use the HU to browse/select/play the mp3 file. The audio decoding happens in the HU, not the phone. No need to do things the iDiot way.
Alternatively, you need a BT HU that supports AVRCP, then you can use the HU to control the phone's media application.
thanks
hey thanks to both of you. great info. just out of curiosity, do you guys actually use these features? and what head unit are you using?
thanks
I use a Sony bt3600u stereo that works fine with BT. Allows pausing/Playing, Skipping forwards & backwards of tracks on the stock music app.
Doesn't display track names etc (Just says 'BT Audio') but that doesn't bother me.
This is my stereo: Link
Hope that helps
I have a Verizon G3 but figure this forum gets more eyeballs, and perhaps this is a universal Bluetooth issue.
I use the LG Tone+ HBS-730 headset with my phone. If I go into a music app and start playing music through my headphones with the app, no problem. But, let's say I pause music for a while, or turn the headphones off for a bit. I turn the headphones back on, press the play button on the right side, and nothing happens. The headset is still on - I can long-press a button and get the double-beep, but my music won't play. Sometimes it does, but most of the time, it doesn't. I switched from the stock Music player to Rocket Player, which has proven to be a little more successful.
Is there a setting I'm missing somewhere, or is this a common BT occurrence? Control is through the AVRCP BT profile, I believe. I know on my G2 I'd sometimes lose control sync with my phone, where I couldn't skip or pause the track through my headphones. This new problem seems like a magnification of that problem.
Overall, I do find the BT performance a little worse than the G2. I get more audio drops when the phone is in my pocket, but this is when I'm outside and BT is not great outside in general.
Thanks everyone - I have five days to decide if I want to return this phone, between this and some signal problems.
bluetooth connects. calls ok. media plays on device.
WheresTrent said:
I have a Verizon G3 but figure this forum gets more eyeballs, and perhaps this is a universal Bluetooth issue.
I use the LG Tone+ HBS-730 headset with my phone. If I go into a music app and start playing music through my headphones with the app, no problem. But, let's say I pause music for a while, or turn the headphones off for a bit. I turn the headphones back on, press the play button on the right side, and nothing happens. The headset is still on - I can long-press a button and get the double-beep, but my music won't play. Sometimes it does, but most of the time, it doesn't. I switched from the stock Music player to Rocket Player, which has proven to be a little more successful.
Is there a setting I'm missing somewhere, or is this a common BT occurrence? Control is through the AVRCP BT profile, I believe. I know on my G2 I'd sometimes lose control sync with my phone, where I couldn't skip or pause the track through my headphones. This new problem seems like a magnification of that problem.
Overall, I do find the BT performance a little worse than the G2. I get more audio drops when the phone is in my pocket, but this is when I'm outside and BT is not great outside in general.
Thanks everyone - I have five days to decide if I want to return this phone, between this and some signal problems.
Click to expand...
Click to collapse
I come from the philippines and i have the g3 also. my bluetooth connection was fine it connected to my car and headset but now it only receives calls but does not play music through my bluetooth headphones. when i press the play button on my headset it plays on the device itself. checked under bluetooth setting and call and media and audio was checked.
my device is rooted. i did a factory reset but the problem remains unfixed. please help. i have installed g3 tweaksbox but i dont see any mods that is related to music apps. i dont know what to do. i have considered unrooting and flashing stock rom.
Also interested in this, as I have the same issue but my car.
Op, did you ever find a fix, or work around?
OP
Do you have any other BT programs loaded? I had something similar when I had the Sony app and a Garmin app loaded. Both use BT to connect to their devices and they were interfering. I removed the Garmin one and my play/pause button started working again
Alan
Tried connecting the phone to my car stereo (cheap third party unit). It paired okay, everything looked like it was working. But I wasn't getting an audio. The headunit displayed the song title, and I could pause or skip to the next track just fine. Media volume on the phone is up, and I assume there is no second bluetooth volume slider I'm missing. I can use the mic on the headunit and it gets send to the phone just fine. Haven't tried one of my headphones to see if they work.
Anyone have any issue with bluetooth or maybe there's a setting I'm missing?
E: Should add I'm on the xiaomi.eu 8.8.9 Beta.
Tried a couple of headsets and they work fine. Guess it's just my cheap radio doesn't like my phone or vice versa.
Same thing here. Changing Bluetooth codec from aac to sbc in developer options fixes it but only temporary. Changing codecs doesn't stick. What a bummer.