I recently turned my phone off, and when i turned it on im getting ActiveSync errors, sometimes it disconnects, wont sync, gtalk stops working, etc etc,
As far as i know it only happens on Wifi, when i disconect and reconect the wifi it all seems to work well ... until it happens again
anyone ...
This problem is not simply related to Exchange (since you make reference to gtalk). When you're experiencing the problems, can you still browse the internet on your phone? Do you get with problem with all wireless access points or just some (how many have you tried)?
Related
Hello,
I can easyly syncronize with USB or Bluetooth.
I've set a WiFi connection to my ADSL router, it works fine, I can scan the LAN (with ScanIP) and see my PC, but no way to sync...
Though Active Sync 3.8 is installed.
Some of you succeeded, what's the magic ? ? ?
Thanks for sharing,
Jean-Jacques
How to guide
Have a look @ this
http://www.wifizard.com/tutorialsXP/sync/index.htm
cchris
Cool link, added to my Favorites, thnks for shareing that with us
Superb
Excellent, if only everything was explained like this, keep it up!!!!
It was already here...
I had actually found it on this forum a few months ago...
But since I had put it into my favourites I figured it would have taken me about the same time to give it you than to tell you "go and and look for it"!
Glad it helped.
Chris
I struggled with this for awhile and could not get it working. The issue was I had was in the PC WINS setting I had left the LMHOSTS Lookup enabled. As soon as I unchecked that and had the Netbios tab checked it synced up. Thanks for the link. Now I can wifi sync.
another gotcha
I read every thread I could find on several forums regarding activesync via wifi and yet I could not get it to work. Then I finally read on a thread that the PPC network card "My network card connects to:"should be set to connect to WORK not The INTERNET. I changed that one setting and bingo, activesync instantly connected via wifi (I already had a partnership created while connected via USB). Of course to have the PPC connect to the Internet via wifi, you have to set it back but that is easy enough to accomplish.
David
Re: another gotcha
dtidmore said:
Then I finally read on a thread that the PPC network card "My network card connects to:"should be set to connect to WORK not The INTERNET. I changed that one setting and bingo, activesync instantly connected via wifi (I already had a partnership created while connected via USB). Of course to have the PPC connect to the Internet via wifi, you have to set it back but that is easy enough to accomplish.
David
Click to expand...
Click to collapse
On my SX66, I don't have to change back to "the Internet" to surf; I just leave it set to "Work".
New problem...activesync connects but
Well, I had everything working, now I have a new issue. I can successfully sync via usb and BT connects. When turn off BT and then tell activesync running on the BA to sync, activesync on both the PC and the BA indicate that they are connected (as BT is off and the BA is out of the cradle, it is obvious that they are connected via WiFi at this point). Then the "looking for changes" meter starts advancing and when it gets about 1/3 of the way finished, it just stops. Both the PC and the BA still show connected and activesync still indicates that it is trying. After several minutes of the no more progress, the PC side activesync indicates that there was a synchronization error.
Any ideas. I have uninstalled activesync 3.8 and reinstalled. I have run the outlook repair utility just in case there was something weird with my outlook pst file (it was clean).
Thanks
David
I have this problem too - I find if i soft reset the unit (and sometimes my computer too) then it works fine. anyone got any ideas?
Tried the soft reset ....
I tried the soft reset on the PPC as well as rebooting the PC and still activesync stops progressing during the sync process about 1/3 of the way thru and eventually reports the synchronization error. I have noted that during BT or usb syncing, the process pauses at the same place for just a split second and then zooms thru the remaining 2/3s of the process. It is like activesync is waiting for somekind of a handshake or acknowledgement from the PPC. I hope someone can shed some light on this.
david
Re: Tried the soft reset ....
dtidmore said:
I tried the soft reset on the PPC as well as rebooting the PC and still activesync stops progressing during the sync process about 1/3 of the way thru
Click to expand...
Click to collapse
Have you tried turning off synchronise 'Files' in the activesync options? sometimes funny files can cause this problem?
Only syncing...
The only things I am trying to sync are my contacts, tasks and calendar. I even tried unchecking even those items so that I was essentially NOT syncing anything but activesync via WiFi still stalls at about 1/3 complete. As I did have WiFi/ActiveSync working for a day or so with NO issues and nothing has changed (or I guess I should say, I changed nothing), this is a real mystery.
David
I often lose my data connection. Only thing I know of to do is reboot, which takes a while. Any way I can force data connection back on? I cannot choose it Comm manager.
Hi Rocky2,
I have the *exact* same problem. I don't have a solution, though.
I've tried disabling all other connections (Bluetooth, WiFi, Activesyc) but no go.
It appears that the connection must be automatically started when there is an application asking for it (e.g. PocketIE). The error mesage I get is that the "The current connection cannot be used for your request. Please end the current connection and try again."
This suggests that it thinks there is a connection, so it doesn't need to start GPRS. I haven't been able to find out which connection is active.
Mike
It's frustrating because even firing up an application that needs the connection (Outlook e-mail, for example) won't start the data connection. Instead, Outlook fails because it cannot connect to server. Maybe WM6 will be better about this.
Tmobile wm6‘s tzones starts up the data connection even after you losing it everytime I try.
Try turning off the radio, then back on. This should force a new connection.
Hi merde,
Turning off the radio doesn't work for me. Besides is very slow too (typing sim pin code..). Even with all connections disabled, some how the connection manager still thinks there is a connection.
Like rocky I'm hoping WM6 resolves it.
I'm considering a hard reset, see what that does..
Hm...
It appears I have the same problem for Wifi... Today it happened twice that I had a wifi connection but no SSID (network name). And then same problems like with the GPRS...
Strange
Mike
Hi friends,
I have a terrible problem with my fine TouchPro2.
It constantly loses the wifi-connection. My old TouchPro1 never had these issues.
I have the actual HTC stockROM installed. Tried WiFiMonster - but again. After a few seconds it loses the connection.
Sometimes I'm able to download three, four mails, but then it breaks again :-(
Any idea?
re
To be more specific: WiFi goes off after 30 sec. or so. :-(
does wifi turn off? or simply disconnect? if it's disconnecting, first thing i'd do is reboot my router with wifi enabled on the phone and see if the connection improves. if wifi is physically turning off i'd guess it's an issue in the rom. maybe try another rom? and make sure wifi is set to "best performance" on phone.
Is this everywhere or on a specific router?
Does your connection drop after a certain activity (e.g. screen going into standby, opening a specific program, etc.)? Also, have you tried to backup your device and perform a hard reset?
Similar Problems
I've been having similar problems for about two weeks now.
I have tried several things like hard reset, soft reset, changing the rom, playing with the wireless connection and just about everything in the connection folder but no.
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection. However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
If anyone have any suggestion(s), I would greatly appreciated it.
solved...
Thx guys,
I performed a Hardreset and testet one by one the installed software... and found it: I installed a CommManager and it caused the WiFi-Problem :-(
thx
biddle said:
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection.
Click to expand...
Click to collapse
What do you mean "slows down the phone"?
biddle said:
However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
Click to expand...
Click to collapse
If your wifi connects but you cant get out, check to make sure you don't have the proxy box checked in connection settings. I have seen this box mysteriously become checked in the past.
Just a little comment
I will be getting TP2 very soon, but speaking of WiFi problems in general..
I had 3 phone: TyTN II, Samsung Omnia & iPhone 3g. only the TyTN could connect to WiFi at home while the other two can connect but will not get any data... however, they worked flawlessly in numerous other locations...
the problem was with my linksys router
apparently some older routers not compatible with the newer devices...
just wanted to share
Ok. As of today, it seems to be working, thanks for the help. However, I think it might have been my router. I think it had something to do with overheating because I put my modem on top of it. But the funny part was, everything, with the exception of my phone, was connecting. However, the connection was never really strong or reliable.
Anywho, thanks for the suggestion, even though it didnt really help me, I appreciate the gesture.
Hi All,
I am trying to share my laptops internet connection with my Defy via a virtual miniport adapter(using a program called connectify)...my phone gets connected perfectly and I am able to surf the net on my phone..but only for a short time. After a while if I just let the phone be on standby for a while, it loses the internet connectivity. It remains connected to the hotspot(on my pc) but somehow there is no internet on the phone anymore. However if I turn off the wifi on my Defy and put it back again, the internet is back. I have tried almost everything but nothing seems to work. Initially i thought the problem might be with the connectify software on my system so tried using other softwares such as virtual router intel mywifi technology etc. I even tried to create a virtual wifi miniport manually from the command line but same problem everytime. I tried to change the wifi sleeo policy in my phone to never and that did not help too. I am running stock Froyo on my Defy. Sometimes when I turn off wifi and turn it back on it wont even connect to the access point, keeps showing scanning...connecting...scanning...connecting...then finally disconnected. I just cant understand what is wrong. If someone can throw some light on this...it would be really helpful, its almost 20 days since I am breaking my head over this.
Thanks
this might help
Install connectify and select wifi security mode as Ad-Hoc,WEP,this worked for me the defy sometimes seems to have a problem with WPA2.
This has been plaguing me for a while and it's making me hate this phone. I've also seen this issue pop around the internet so it's not just me.
What happens is the wifi stays connected to the router but has no connectivity (i've tried pinging the gateway when it happens, the connection is dead although it is listed in the router as connected). And it happens totally random, sometimes it works entire day, sometimes it happens every hour or worse. This seems to have gotten worse with MM. I used to be able to fix it with turning wifi off/on but now even reboot wont help (it connects to the router but immediately says no internet on wifi), i have to reset wifi on the router for it to start working. I have 2 other androids (kitkat, lolipop), an iphone 5, tablet with a hybrid OS, 2 laptops and a desktop on the wifi working without issues so that kinda rules out the router as the sole culprit (it's a Technicolor crap from my ISP that i can't change, i can only buy an additional AP but i have no idea it will help). Ofc, when the connectivity is lost, the phone is still connected to the wifi, hence doesn't switch to network and i stop receiving notifications, which is driving me insane (also a work phone).
I recently installed an app ("wifi connection manager", the app itself is fairly useless, half the stuff doesn't really work that well, and all the options are really things you can do manually) that has a background service that i thought would keep the connection alive. It worked for about a week and then all of a sudden it stopped. I've tries everything else, short of reflashing the phone.
So after ****ing around for the 1000th time, trying to figure it out i realized that turning the WMM off (router QoS) stops the connectivity issues. Problem with this solution is that my download rate over the wifi drops by half immediately (from 50mbit to 25) and after a while all the wifi connections start to deteriorate to the point where it becomes painfully slow. What's more puzzling however is that when i do turn it off, the G4 connects via 802.11g (and for some reason this makes the connection not lose connectivity). Other devices connect via 802.11n whether WMM is off or on (except the desktop, which has an old wifi card, also on 11g).
Sorry for the wall of text. This and the anticipation of a bootloop is making me seriously regret my purchase.
So my two questions are:
1. Is there a way for me to force the G4 to connect via 802.11g even when WMM is On ? It obviously chooses how to connect on it's own.
2. Given the history of events, is there a network guy somewhere here that could identify wth is going on ?
Thanks a lot for those that made it this far