Develop Bugs

How to replace the data port

Hey guys-- got back from the t-mobile store and they told me the data port is dead (from water damage). It turns on with a fresh battery fine, but apparently I'm getting an error code. That code is probably that the data port is messed up because I can't charge my battery. I'm assuming I have to replace it. Does anyone know of a video tutorial or something that will show me how to do it?
thanks.

the chances of the data port being physically damaged by water is very slim- I think they are trying to tell you the circuitry is faulty. If you had ripped the charger out and bent or broke the port, then I could see it- but water cannot bend or break that way and corrosion is unlikely unless its been sitting a while.
Back to the original subject though, I just replaced a faulty USB port on my friends Moto Q. It wasnt bad, but you need a very small pencil iron (I use a station) and good eyes, otherwise you will bridge the tiny connections and be fubar'd.

gospeed.racer said:
the chances of the data port being physically damaged by water is very slim- I think they are trying to tell you the circuitry is faulty. If you had ripped the charger out and bent or broke the port, then I could see it- but water cannot bend or break that way and corrosion is unlikely unless its been sitting a while.
Back to the original subject though, I just replaced a faulty USB port on my friends Moto Q. It wasnt bad, but you need a very small pencil iron (I use a station) and good eyes, otherwise you will bridge the tiny connections and be fubar'd.
Click to expand...
Click to collapse
Where did you find the port to replace it with...

find a bricked one on ebay or something..or someone selling one with a cracked screen etc...use it for parts

welp, i've never soldered... guess you gotta learn sometime. ports are bout 25 bucks... Guess I have a new hobby. Or maybe I should just buy an external battery charger... soldering sounds more fun though. Yeah, what i meant by getting an error code is when i plug in the charging cord into the cell phone, I get a red light instead of yellow/orange. But, I have to push up on the cable where i insert it into the port to get anything. So, its not dead, but either dying or drunk....... drunk from oil.... which it swam in... and got sick from. vegetable oil, not motor oil... which would be a waste of oil. Anyways, thanks for the replies and if you stumble upon a vid for the dash, please post it. I found some on blackberries, but not an excaliber.

sorry browser problem (double posted)

my friend sourced his usb port from Mouser (P/N 538-67503-1020) for $1.12 each. I still have one (he got a spare) but I dont have a dash to take apart and compare the pins. I assume they are all the same generic port, but the pin spacing could differ
http://www.mouser.com/Search/ProductDetail.aspx?qs=7zcQ9RRVJlhHWuXYKEhKMg==

that's pretty sweet speed. I bookmarked that webpage (dunno why really). I could just always link from here; but anyway, I received a new battery that I ordered before the geniouses at t-mobile told me that a red light is an error code, my old battery is perfectly fine, my data port is broken, and no... a new battery won't fix it. *** what's my point you ask?***
They don't know jack fecal matter. I just popped in the new battery and 1) my phone turned on, 2) my charging light turned orange, 3) my plug doesn't need adjusting to charge the phone, and just now 4) my phone has signaled to my through a pretty green light that the new battery just finished charging.
So, to recap, the guys at t-mobile said my port was fried and that all my problems were due to that. My theory was that oil (and come to find out water) damage caused the battery to malfunction and thereby refused to allow a current to charge it resulting in the errors. Turns out, I was right.
Thanks speed and all for your replies. If I need a cheap miniusb port in the future, I now have a good source. Now, Anyone know if a new lcd will fix the splotchy marks on my screen (look like dark puddle spots). I'll post a pic in a new post in a minute.

Yah you can grab a new LCD off ebay (fairly cheap) and then go to youtube and youtube "fix dash screen" and there is a tutorial on there that will guide you on replacing your screen.

just make sure its the lcd thats the problem- the outer clear part that you can touch is separate, and comes with the case. Mine are scratched to hell on both my Dash's but I refuse to buy new cases to fix them

i dunno what's up anymore
I don't know what to think of this thing anymore. This morning it wouldn't turn on, even though I had the green light on the device as it was plugged in all night. So, I kept fiddling with it hoping it would turn on so I could have ATT do a remote hard reset. Well... it wouldn't cooperate. So, I left it alone. Then this evening I was about ready to bury it and I tried the power button one last time and it turned on. But, the battery was really low and I got the red light again when I plugged it in. I guess the battery got a bit of a charge in itself just sitting there. So, perhaps the t-mobile guys do know what they're talking about. Well... i did actually get the orange light while it was on for that sweet minute, which should mean its charging, but I guess its not actually charging the battery. I suppose the last way to go is external charger. I'll probably pick one up off ebay for 15 bucks.

[Q] Could I be getting electric shocks from my Desire?

Am I imagining it or is my Desire giving me mini electric shocks?
It's just like a tingling sensation from around the edge of the phone. **Edit Anyone know what sort of multimeter I would need to test this and what settings I would use**
Should I take my phone back - I only got it last week?
Also the phone seems to heat up towards the lower quarter of the back under use - is this also normal?
Thanks

Coastline said:
Am I imagining it or is my Desire giving me mini electric shocks?
It's just like a tingling sensation from around the edge of the phone. **Edit Anyone know what sort of multimeter I would need to test this and what settings I would use**
Should I take my phone back - I only got it last week?
Also the phone seems to heat up towards the lower quarter of the back under use - is this also normal?
Thanks
Click to expand...
Click to collapse
Electric shocks are not normal, warming up is.
Sent from my Evil Lair using Doomsday Device

I know what you mean by the electric shocks. A buddy of mine had the exact same problem with his desire. He walked around for a week getting zapped as he wasn't sure if he was imagining it. Take it back to HTC. Your phone needs to be serviced.

does this only happen if the phone is connected via the USB port to some external device like a notebook or your AC adapter? Then it's normal.
Does this also happen if it's not connected to anything? Then it's not normal
Heat:
Yes, it's normal. The CPU with a small heat spreader is located at the bottom of the desire. And the CPU produces heat. The Desire can get really warm, so nothing to worry about.

This happens when it's not plugged into anything.
Thought I was going nuts but I don't think so - well no more than usual.
Anyone have any suggestions for testing this. I have a multimeter but have no idea what I should do with it! :-(

put your Desire on a wooden desk and touch it with only one finger on the bronze colored edge. Do you get a shock then?
Or do you only get a shock while holding it in your hand? Maybe because there's a high voltage between the edge and the USB connector?
set your multimeter to Voltage. Put one probe on the edge of the Desire (without touching the Desire with your finger or anything else), the other probe to the ground, e.g. a conductive heater or a blank heating pipe or the ground pole in your wall socket (but be careful ).
Measure both DC and AC voltages. Any high voltages? Something above a few mV?
Also measure the voltage between the casing and the USB socket frame.

My theory... metal casing + static charge = electric schock! Used to get these in clothes stores
Sent from my HTC Desire using XDA App

I can't get any reading of my multimeter but I must admit to not really knowing what I'm doing!
"Static" .....hmmm I wonder!

Well, it's gone to be examined! They may even send it to HTC to be tested!
Lady in the shop gave me that knowing "you're a looney" look!
When I mentioned it was more like a tingle than a shock she smiled and said "Maybe that's why they call it a 'Desire' "! Should have seen that one coming!
Maybe it is just me and static but as I haven't had it on any of my previous HTC phones there must be something with the design that amplifies it!
Just have to wait and see...

Coastline said:
Maybe it is just me and static but as I haven't had it on any of my previous HTC phones there must be something with the design that amplifies it!
Just have to wait and see...
Click to expand...
Click to collapse
Well it would just be the metal rim around the phone and the electrons on your fingers...
Sent from my HTC Desire using XDA App

Have my phone back from Vodafone:
"They are pleased to say the fault has been fixed"
"One of our engineers has thoroughly tested your phone. The repair centre was unable to identify a fault with your phone.
"As part of the repair process we have given your phone a full internal service including upgrading the software as this is how many faults are fixed!
So - the fault that they couldn't find is now fixed and my phone has new spark plugs and fresh oil!
Don't you just love automated letters!
So it's looking like it must be a static issue! Guess I'll just have to live with it!

cooooool....

Charging Issue

Hi guys,
i have some issues with charging my inc2.
it is not accepting any charge anymore, tried diffrent chargers, cables, even on my pc but nothing. The orange charging LED just flashes slowly on and off...
Any ideas?

Need to replace phone or replace charging port.
Sent from my Galaxy Nexus using xda app-developers app

Snake-Plissken said:
Hi guys,
i have some issues with charging my inc2.
it is not accepting any charge anymore, tried diffrent chargers, cables, even on my pc but nothing. The orange charging LED just flashes slowly on and off...
Any ideas?
Click to expand...
Click to collapse
Yes, unfortunately it is a known hardware issue. Over time, the charging port starts coming loose. Like mentioned above, you CAN fix it yourself. There are video tutorials on YouTube and the replacement part can be had for under $10. If your device is still under warranty, Verizon will replace the phone. If it's not under warranty (or if you just want to give it a go), the port replacement process is pretty straightforward.

I might give it a try. Does anybody have a video or a link?
The weird thing is, that the battery is discharging very fast, could it be just a bad battery?
Sent from my GT-N7100 using Tapatalk 2

Could b the back door on your inc 2. I believe you need the back door on to charge cuz it goes thru contacts on the back. I dropped mine one day and charging and getting signal was almost impossible till I figured that out and bought a new one

Ok.
Seems to charge now. Won't touch it until it is full. After that I will check what is going on.
I don't know where this issue came from.never dropped it nothing. It was even in a Otterbox
Sent from my GT-N7100 using Tapatalk 2

The issue stems from regular use. The charging port is essentially held in place only by the connections to the board. Repeatedly plugging and unplugging the power cable causes it to break over time.

actually just replaced the charger port on my incredible 2 today. It really wasn't that difficult at all. If you have any questions feel free to PM me

yeah it has to be replaced. happened to me last month. It's honestly like the worst flaw with this phone

Snake-Plissken said:
Ok.
Seems to charge now. Won't touch it until it is full. After that I will check what is going on.
I don't know where this issue came from.never dropped it nothing. It was even in a Otterbox
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Def need to replace it. Same issues I was having at one point with it randomly taking charge. I found that if the charger is plugged in a held a certain level ( i placed the phone on a flat surface with a book under the cord for leverage) it would charge just fine.
If you are rooted and sending back, make sure you revert to stock to avoid any annoyances.

I've managed to solve this issue without messing around with the phone's innards (the last time I did it was a disaster and I was forced to buy an entirely new phone). It's not pretty, but if you twist a rubber band around the micro usb end of your charger, plug your phone in, twist that same rubber band around the phone itself, and make sure the connection very tight, you might get some more life out of your charger port.
Ugh. I can't wait for my upgrade.

Nice name there Dave.
sent from my paranoid android

gdwy89 said:
I've managed to solve this issue without messing around with the phone's innards (the last time I did it was a disaster and I was forced to buy an entirely new phone). It's not pretty, but if you twist a rubber band around the micro usb end of your charger, plug your phone in, twist that same rubber band around the phone itself, and make sure the connection very tight, you might get some more life out of your charger port.
Ugh. I can't wait for my upgrade.
Click to expand...
Click to collapse
While, I give you major kudos points for MacGuyver-ing a solution, that's more of a quick band-aid than a real fix. I could imagine having a rubber band around the phone could potentially hinder usage.
But hey, way to think outside the box! :good:

Card83 said:
While, I give you major kudos points for MacGuyver-ing a solution, that's more of a quick band-aid than a real fix. I could imagine having a rubber band around the phone could potentially hinder usage.
But hey, way to think outside the box! :good:
Click to expand...
Click to collapse
Thank you. You're telling me. Do you know how hard it is to use a touch screen with a rubber band across it? Oy.
Right. The caveat here, of course, is that this technique will only help charge your phone until the charging port becomes so disconnected from the board that no amount of force will reestablish this contact. And this will inevitably happen because you're going to keep plugging and unplugging your phone from the charger which is what created the issue in the first place.
If you know you have big, sweaty, idiot hands (like me) that are going to destroy your phone if you take it apart (like me) and you can tough it out: more power to you. The other alternative is to buy an external battery charger and a second battery. The disadvantages here are pretty obvious (e.g. you have to carry a second battery around; if you forget a second battery, you can't ask another Android user to borrow their phone charger, etc.).

[Q] Is it the Battery or is it something else?

Hi there.
My Mother has a One V which she is really happy about. But recently she says that it has been draining the battery so fast. At first i didnt really believe it (you know old people and tech), and asked if she had charged it correctly. She then told me that the charging process was also quite strange.. She had plugged it in one night, and the phone displayed that it was charging.. Then 8 hours after, in the morning it had only charged 2% ! This doesnt happen all the time, but only some times.
Now she has given it to me and hope that i can fix it. At first im just going to factory reset it, even though i dont think that is the problem. But i have noticed that what she is telling me is true to some extend. I have had the phone sitting on the table all night. No simcard and no nothing.. It had only used about 5%, but as soon as i began using it, to take backup and prepare for the reset oh boy.. It uses 1% in merely seconds! Approx 26 seconds per 1%!
I think this is rather strange and im unsure if the battery is the problem.. Do you guys have any ideas ?

Oh and i have to say that the phone is running newest stock software. It has never been rooted or anything like that.

Well, the charger port is probably bad. My first htc one m8 and my droid incredible 2 both have weak ports on them from the factory. Send it in for warranty and say nothing < about a possible bad charging port if it still has warranty. And, if nothing Less try a brand new charger, and see if that one works and if it's loose when it's plugged in. If it Is loose with new charger it's a bad charger port.

Yeah this confuses me as well. It happens once every few months. The battery drains really fast and charging is extremely slow. The first time this happened my One V dropped from 100% to 27% in 20 minutes! And just like it randomly happens it randomly goes; battery consumption goes back to normal after a day or two.
A possible reason is the charger and USB cable that is used. My cable is worn out so that might be why charging is slow but it doesn't explain why the battery drains so fast even when the phone is disconnected from the charger. So the only reasonable explanation would be some hardware problems in the battery pack.
But this is all just me guessing... I don't know for sure.

tylerleo said:
Well, the charger port is probably bad. My first htc one m8 and my droid incredible 2 both have weak ports on them from the factory. Send it in for warranty and say nothing < about a possible bad charging port if it still has warranty. And, if nothing Less try a brand new charger, and see if that one works and if it's loose when it's plugged in. If it Is loose with new charger it's a bad charger port.
Click to expand...
Click to collapse
It could be the charger port. I tried cleansing it with a toothpick (heard dust could be the problem), but the problem persists
swhatevers said:
Yeah this confuses me as well. It happens once every few months. The battery drains really fast and charging is extremely slow. The first time this happened my One V dropped from 100% to 27% in 20 minutes! And just like it randomly happens it randomly goes; battery consumption goes back to normal after a day or two.
A possible reason is the charger and USB cable that is used. My cable is worn out so that might be why charging is slow but it doesn't explain why the battery drains so fast even when the phone is disconnected from the charger. So the only reasonable explanation would be some hardware problems in the battery pack.
But this is all just me guessing... I don't know for sure.
Click to expand...
Click to collapse
The problem here is that it happens every second time or so the phone is charged at the moment. But i have bought a new battery and will try and change it. Ill write here how it goes and if there is a improvement, so that you know where the problem relies if you are thinking about doing the same.

Same problem here. Every few months the battery drops from > 50% to 2% or so. This happens within some minutes and my phone gets really hot.
But normaly I use it with a 2 amp charger and I think this happens more often if I use chargers with 1 amp.
Edit: This happened for me with every rom I used.

I changed the battery two days ago, and i can already feel a huge improvement.. 8 hours ago i took it out from the charger. Data and Bluetooth has been on all day. Been browsing a little, and sent som SMS and stuff like that.. 65% now.
The conclusion must be that in my case at least, it was a battery hardware fault.

I'm also thinking about replacing my battery, was replacing it easy?

jonas2790 said:
I'm also thinking about replacing my battery, was replacing it easy?
Click to expand...
Click to collapse
Yes it was actually pretty easy. Although i have done it on my One S too, and that was even easier.
Some recommendations: Get your self a repair tool kit before you start. Everything has been so much easier for me after i got that. It is all the money worth it . This is what i got http://www.ebay.co.uk/itm/261399617620?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT <- They ship worldwide.
The battery i brought : http://www.ebay.co.uk/itm/321303229844?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
First i took the plate off at the bottom of the phone (the one where there behind is sim card and sd card). Unscrewed all six screws. Once done you can take all the plastic off the large plastic part (the one below the simcard and sd card when inserted, and covering everything behind the outer cover). This part is also taped/glued, but should not be a problem to get off.
After you have taken that off, use a pry tool to pry the plate open around the camera lens and flash (beware that this plate is also taped together. Unscrew the last screw behind.
Now comes the tricky part. You need another more solid pry tool to pry the lcd/board out from the front. Use the pry tool in between the screen and the cover of the phone, and all the way around. The LCD and board needs to come out from the phones front.
After that the battery becomes visible. There is nothing special to getting the plug out for it as far as i can remember and should just be pulled towards the battery to get it out. Battery is glue to the inside of the phone, but using the solid pry tool you should be able to get it out. If you order the battery i linked to, it comes with new 3M tape.
Heres a video showing it pretty good i think:
https://www.youtube.com/watch?v=gPasbSobzwA

Da9L said:
Yes it was actually pretty easy. Although i have done it on my One S too, and that was even easier.
Some recommendations: Get your self a repair tool kit before you start. Everything has been so much easier for me after i got that. It is all the money worth it . This is what i got http://www.ebay.co.uk/itm/261399617620?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT <- They ship worldwide.
The battery i brought : http://www.ebay.co.uk/itm/321303229844?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
First i took the plate off at the bottom of the phone (the one where there behind is sim card and sd card). Unscrewed all six screws. Once done you can take all the plastic off the large plastic part (the one below the simcard and sd card when inserted, and covering everything behind the outer cover). This part is also taped/glued, but should not be a problem to get off.
After you have taken that off, use a pry tool to pry the plate open around the camera lens and flash (beware that this plate is also taped together. Unscrew the last screw behind.
Now comes the tricky part. You need another more solid pry tool to pry the lcd/board out from the front. Use the pry tool in between the screen and the cover of the phone, and all the way around. The LCD and board needs to come out from the phones front.
After that the battery becomes visible. There is nothing special to getting the plug out for it as far as i can remember and should just be pulled towards the battery to get it out. Battery is glue to the inside of the phone, but using the solid pry tool you should be able to get it out. If you order the battery i linked to, it comes with new 3M tape.
Heres a video showing it pretty good i think:
https://www.youtube.com/watch?v=gPasbSobzwA
Click to expand...
Click to collapse
Aah so it was the battery pack after all!! Interesting to know.
Glad it worked out for you and thanks for the battery replacement links.
My One V is retired but since the battery is cheap I will buy one and replace it just in case I ever need the phone as backup.

Question Z Fold 3 'Too Cold To Charge' after water damage

Okay, hello XDA Forums peoples! Ive been lurking here for like a decade. I feel bad for bothering you nice people, but now I'm at my wits end with this phone.
Okay, so, long story short:
Z Fold 3, let it run the One U.I. 4 update, bricked the whole phone, wouldnt come back on. This happens a week away from being out of warranty. So i get samsung to agree to let Asurion/uBreakiFix repair it (I almost always fix my own electronics, I hate Asurion, I've had problems dealing with them before, but its free so whatever). Well they get it working, i asked what they did and they were basically like 'uhhh idk'. I assume it was just an 'unplug the battery and plug it back in' kind of thing.
Anyways fast forward to a couple months ago. Im walking along the creek, i always keep my phone in my backpack for safety. Zipper on my backpack comes open some, phone falls out and directly into the water for about 3-5 seconds. Goes black within 15 minutes. Alright, so it seems like maybe the boys who worked on this didnt seal it back properly. Whatever.
I let it dry for about 4 or 5 days. Comes back on, everything works except the front screen's digitizer(which is cool for me, because the inside screen still works fine) and its reporting too cold to charge, so now once the battery runs out i have a new foldable brick! Yay! I check the battery temperature thats reported in settings and its completely fine. I hit it with a hair dryer for like 5 minutes to try and trip the thermometer, and nothing happens.
I tried some cheap shots in the dark, i replace the USB charging board, i replace the wireless charging coil, both of which have thermistors on other older samsung phones, so i figured it was a decent guess. Still too cold to charge.
So I find a schematic, or not exactly a schematic, but like a boardview, i guess. So at least i know where the thermistors are to check them. Theres about 10 thermistors on the main and sub boards. 5 of which are covered by metal shielding which i am just terrified of trying to remove, mainly because i havent done it before. So i check the other half.
The thermistors used in these phones are like inverse, so they have less resistance for higher temps and more resistance for lower temps. If one of them is dead, it will have like "maximum resistance", right? Which would report the coldest possible temperature, right? So that all makes sense, to me at least.
The 5 i can get to with my meter to check, they seem to work completely fine. From what research ive done they seem to be like 100k resistors when measured at ~70 degrees f, and i can watch the resistance go up and down when its cooled or heated past that temperature. Okay, perfect. That all checks out.
Because the other ones are under some metal shielding, i assume theyre most likely fine because any water would have a harder time getting in there. So i skip to the most expensive option so far: i buy two replacement batteries. The schematics do not include the battery, so i dont know where the thermistors are on my current batteries to check them, if that was the problem.
Well, batteries came yesterday, i pop them in, still too cold to charge. I've already ran the phone dead checking it, so i cant do any further diagnostics with the phone on. And now the most i get is a Yield sign with a thermometer in it when i plug it in.
Okay, so... Idk?? This problem is starting to get over my head. What do y'all think? It seems like my options are becoming more limited and expensive.
I can try and put a big blob of solder on the top of the shielding and pull it off to check the remaining thermistors, which seems to be how people remove those things. I also have have hot air at my disposal, which is always risky with tiny things because too high airspeed might blow components away on the board and then i'll probably cry.
It could just be a connector somewhere on some flex cable? Maybe? I mean like maybe what if one of them is for reporting temperature, and water corrosion is stopping it from sending a signal through???
Im fine with doing whatever, but i just want a charged battery first so i can recover my data before i do anything that drastic. I mean, back in the day they had 4 big pads on a removable battery. You could buy a universal samsung battery charger or rig a USB cable to charge it, but I have literally no idea what to do here. Does anyone know of some specialized battery charger that will connect to these flex cables?? That would be a gigantic help right now. Or if i knew where to get a Z Fold 3 just to pop it open and charge my battery with? Or maybe just sit there for 2 hours holding two wires to the positive and negative pins?!??!?? I dont know. Someone throw ideas at me, please!

Might be worth buying a bench power supply and either injecting voltage through the phone or connecting it to the cells to trickle charge them back up? Im not an expert it these just throwing ideas