Customer ID error while rooting? - Desire General

Every time I run the root update utility, it gets to a point where it says something along the lines of Customer ID error. I don't know what the problem is!? Can anyone help me out please?

Hmmm... might be related to the GoldCard. Did you mange to create one successfully? (It shouldn't have given any 'do you want to format the drive?' messages when connecting the phone in Windows, in USB Disk Drive mode.

That's what I thought might've happened, but I'm pretty sure that it didn't, and unlike in the past the HXD Editor successfully wrote the goldcard.

Tiny Linux
Hi guys, trying to load the Tiny Linux ISO referred to on Paul's page, however my pc boots up, recognises the disk, starts to load Linux then black screen......anyone else had this? Not sure what to do next, desperately want to root my phone......help.............

ummm... silly question, I know, but... you did press enter at the first prompt, didn't you? (it will hang a bit, then start the actual boot process)
alternatively, you might want to try the 'rooting from windows' method posted here in another thread, instead:
http://forum.xda-developers.com/showthread.php?t=673277

cezarL said:
ummm... silly question, I know, but... you did press enter at the first prompt, didn't you? (it will hang a bit, then start the actual boot process)
alternatively, you might want to try the 'rooting from windows' method posted here in another thread, instead.
Click to expand...
Click to collapse
LOL......yeah did that.........i get some text appear about installing ADB etc, but then immediately after the screen goes black. How long does it take before you get the desktop on normally? Cheers Andy

I've even tried reformatting the SD card and reconverting it into a Goldcard, and the update utility still gives me error 131, Customer ID error, use correct utility.

about 20-30secs after pressing enter. are you booting it in a vm, or did you burn it to a cd and use it on the computer? (vm's might be buggy)

ipodtouch, what bootloader version do you have? if it's 0.80, then you can't root the device. not yet, at least.

No I'm using the guide for Windows.

cezarL said:
ipodtouch, what bootloader version do you have? if it's 0.80, then you can't root the device. not yet, at least.
Click to expand...
Click to collapse
It's definitely at 0.75 when In check it after booting with back held down.

cezarL said:
about 20-30secs after pressing enter. are you booting it in a vm, or did you burn it to a cd and use it on the computer? (vm's might be buggy)
Click to expand...
Click to collapse
Hi, thanks for your replies. Burnt to a CD, booted via the cd. I get past the press enter bit, I have about 10 lines of text, it says "DONE" then the screen goes black....I dont suppose it matters that I am running a digital connector from my graphics card does it??????? Attached a photo of where it gets to, immediately after the last line of text appears as "DONE", the screen goes blank and stays like it....

murdoch1 said:
Hi, thanks for your replies. Burnt to a CD, booted via the cd. I get past the press enter bit, I have about 10 lines of text, it says "DONE" then the screen goes black....I dont suppose it matters that I am running a digital connector from my graphics card does it??????? Attached a photo of where it gets to, immediately after the last line of text appears as "DONE", the screen goes blank and stays like it....
Click to expand...
Click to collapse
Ok.......I think I may be getting somewhere......I tried pressing F2 when asked to press Enter. I get a load of options. I have tried TINYCORE and then used the setting to switch on text mode only. This resulted in the following command prompt being dsiplayed:-
[email protected]: ~$
Is this what would appear within the terminal window? Would I then be able to use the following commands?
SUDO MKDIR /NMT/cdrom
etc etc etc???????

Yes, that should be a good text prompt.

The Professor said:
Yes, that should be a good text prompt.
Click to expand...
Click to collapse
Thanks.....so.....just want to re-cap the process. I have made the goldcard..On it I have the rootedupdate.zip file.. do i just follow the steps below? Is there anything missing from the steps below as initially Paul had supplied a testRUU.exe file?
# Turn off your HTC desire, then turn it back on with the 'back' button held down. You'll see 'FASTBOOT' written on the screen in a red box. Connect the phone to the computer.
# In the terminal window, enter the following commands:
CODE
sudo mkdir /mnt/cdrom
sudo mount /dev/cdrom /mnt/cdrom
cd /mnt/cdrom/root
sudo ./step1.sh
# When this step has completed, using the optical trackball, navigate to the 'BOOTLOADER' and then 'RECOVERY' option on the menu, using the volume buttons to move and the power button to select. Then, again in the terminal window, enter the following commands:
CODE
sudo ./step2.sh
# When this has completed, your device should be at the 'recovery' screen. Select the 'wipe' option, then select the option to apply an update zip from sdcard, and select 'rootedupdate.zip'. This will take a little while, so go make a nice cup of tea. When the flash has finished, reboot, and you are DONE!

That's all correct if you've burned it to CD-ROM and you only have the one drive in the system. If it's on USB (as I did it) or you have multiple drives, you may have to hunt for the right one. If you do need to hunt, try using the fdisk command to show all drives; then you should be able to use mount /dev/whatever (cdrom1,flash,sdc1, etc).
Try the cdrom option first, then come back if that doesn't work.
To clarify, step1 pushes the new RUU, flashes what it needs to, then step2 puts you in recovery so you can flash the new ROM.

The Professor said:
That's all correct if you've burned it to CD-ROM and you only have the one drive in the system. If it's on USB (as I did it) or you have multiple drives, you may have to hunt for the right one. If you do need to hunt, try using the fdisk command to show all drives; then you should be able to use mount /dev/whatever (cdrom1,flash,sdc1, etc).
Try the cdrom option first, then come back if that doesn't work.
To clarify, step1 pushes the new RUU, flashes what it needs to, then step2 puts you in recovery so you can flash the new ROM.
Click to expand...
Click to collapse
Sorry Professor. I am confused now. Do I need to have the testRUU anywhere or do I not need this?
What are you referring to when you said "if you've burnt it to cd-rom?"......are you referring to tinylinux or the testRUU? As you can tell I am a little nervous and want to be sure I have everything needed to root the phone....

If you took Paul's tinylinux iso, it contains the Testruu file in one of the directories already on there. In other words, if you took the iso he linked and burned it to CD, you should be able to follow the directions word for word once you get to the TL command prompt, which you have. His step1 and step2 scripts will take care of everything, there's nothing extra besides the rootedupdate.zip that you need to worry about.

You don't need testruu with the .iso, it's included in the 'step1' phase (downgrades your rom to an unrooted 504.3 versio). 'step2' will push the required files for entering recovery mode, and also the rooted version of the current stock rom (504.4 - which is what you'll end up with after flashing).

Has anyone got any ideas about my problem please?

Related

[Q]Help With Getting passed the adb loop step

Every since the root method came out, I've been trying to root my phone for hours and hours and I haven't been able to. Since this is a problem for quite a few other users, I figured we should have a thread just for this problem since the rooting thread is over 30 pages long at this point.
My problem is that I see the device in offline mode for a few seconds, and after that it displays an empty list again.
What I'd like to know from people who managed to root their phones, if they had to try something different from the instructions to get passed the adb loop step where you have to catch the device in offline mode? What OS are you running (Win, Mac, Linux and x86 or x64)? How many times did you try?
I got past the loop by hitting ctrl c as soon as it detected the device it worked for me. it seems if you let the loop continue and you get device not connected you have to try again. I was able to get this to work consistently twice.
Getting the adb portion of this is what took me the longest in the rooting process.
Had your same problem on Ubuntu
Had same problem on windows 7 64 bit
UNTIL:
installed pda net - then htc sync, then removed android device driver, then installed the (r3) driver from android sdk... the update you can download through their program.
After that it worked like a charm first time.
my best advice is to start running the loop just before you click recovery from the boot loader screen.
Once you got it, theres no need to be quick with control C - it stays there.
- Faylix / local
the PDANET program seems to mess with the offline loop thing.
Once I closed it, it goes through just fine..
The only problem im having is that im getting a E:Failid to verify whole-file signature when i push the update.zip
And also I've used both Windows 7 64bit and XP 32bit to no avail...
My guess is its all about the drivers. I must have mine all mixed up. I am stuck in loop with no device found either. I will try one more time with pdanet off but Ive tried on a pc without it too anyways.
Someone really needs to write an indepth guide like the G1 because drivers arent even meantioned in the guide and I know its a big part of it especially if you have had other android devices before with sdk plus adb. One thing I do notice is all of us with the loop issue have touble with the device showing in device manager. It displays android 1.0 instead of mts or adb whatever it supposed to be. If your device isnt recognized from hboot it wont make the proper jump into recovery. Hence the loop issue. Can anyone with root ellaborate this a bit more?
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
shinkinrui said:
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
Click to expand...
Click to collapse
You are a godsend. Spent the last two hours trying to time this just right by doing Step 2 and 3 over and over and over. 5 minutes after reading this post - Hello, Clockwork.
Lol
shinkinrui said:
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
Click to expand...
Click to collapse
I was having some trouble to, I found something else that I was gonna add but it was only on my end... I didn't have the same problem rooting my wifes. I will watch this thread and if I see any more posts I will drop my piece. Im glad someone else could post this before I could.
shinkinrui said:
@jnight
You're very close. I had this happen to me too. What's happening to you is the first try failed but the update.zip still got pushed to the SD Card. Here's what you do:
1) adb push ota.zip /sdcard/update.zip
2) Type in "push update.zip /sdcard/" on your computer but don't push enter yet
3) Choose "install update.zip" in the phone. AS SOON AS the green bar appears behind the letters, press enter on your computer.
If you miss the timing and don't see clockwork recovery, you NEED to go back to my step 1("adb push ota.zip /sdcard/update.zip") or it will continue to fail no matter how many times you try because you HAVE to start with ota.zip as the update.zip on the SD card. The trick is getting the phone to verify the signature from the ota.zip and replacing it with update.zip to enter the clockwork recovery. Once you're in clockwork recovery, it's a breeze- just follow the rest of the stickied root tutorial. Hope this helped
Click to expand...
Click to collapse
Thanks Man, I guess I was pressing the Enter button to fast...
Got past eveything except the "SU" it says "Permission Denied"
NM about this post for some reason it started working after I installed "Setcpu". Went in to Terminal emulator and it gives me the # just fine..
For some reason its just ADB that gives Permission Denied..
"Step 18.
adb install Superuser.apk (If this looks like it works, but says it cannot locate directories, make sure you can find your device using adb devices… If things still don't work, my best advice is to start over)
Step 19.
After Superuser is installed try to use adb to shell to your device.
adb shell
you will get a $
Then type su
Superuser should pop-up asking if you give permission, do so.
Your $ should turn into a #. If so, you have root."
Make sure you run this or you wont get SU rights, this programs needs to be installed to allow the SU rights.
AngelsShadow said:
"Step 18.
adb install Superuser.apk (If this looks like it works, but says it cannot locate directories, make sure you can find your device using adb devices… If things still don't work, my best advice is to start over)
Step 19.
After Superuser is installed try to use adb to shell to your device.
adb shell
you will get a $
Then type su
Superuser should pop-up asking if you give permission, do so.
Your $ should turn into a #. If so, you have root."
Make sure you run this or you wont get SU rights, this programs needs to be installed to allow the SU rights.
Click to expand...
Click to collapse
Thank you thank you....
I've been repeating myself over and over regarding this...
It's the Number 1 issue why people can't Root & Flash to the ENGINEER Build!!
Still a no go
Marvin,
I am still getting the two device OFFLINE showing after going into recovery from hboot. I deleted ALL of the HTC SYNC software and drivers and ONLY installed PDAnet. I now can see the MY TOUCH SLIDE device when connected in hboot, unfortunately I still am having the same stupid problem. So since it's not showing android 1.0 anymore and still having the same problems, we might have to explore some other avenues. FOR THE LOVE OF ROOT SOMEONE PLEASE HELP US!!!
If you run loop and go to recovery and only see the device offline a couple times then it goes away, I do not think it is a driver issue at that point. As someone in the root thread explained, the loop is simply trying to catch the device in ADB mode as it's going into recovery. And then, randomly, it will "stick" in ADB mode. Now, I am not sure if there is a difference between our devices for those of us having trouble getting the ADB mode to stick.
Ok, I'm giving up. I have tried this hundreds and hundreds of times. I know I've followed the instructions the correct way (I've seen the video and read countless forum posts). This simply cannot be done on my phone. I am going to take it to the store and try to exchange it, perhaps for a black one.
Does anyone else have any suggestions?
as i posted in the other thread i was having problems trying to get adb "stick" open when i went from the bootloader into recovery so i went into the file explorer and right clicked on my computer then went to manage devices then went to the driver tab then clicked on update driver right before i went into recovery and this is what finally worked for me. the purpose wasnt to change the driver the purpose was to trick my computer into keeping adb open
Re: Getting passed the adb loop step
I had to hit power on phone and enter on pc at almost the same time to get it working. Then I realized that after you reboot, it boots back to your normal phone not recovery and then adb devices it shows up.
-------------------------------------
Sent via the XDA Tapatalk App
Re: Getting passed the adb loop step
Ugh none of these tricks have worked for me.. Still Stuck .. Maybe it's a computer issue.. Guess ill try a friends computer..
-------------------------------------
Sent via the XDA Tapatalk App
Maybe/hopefully someone will find a different/easier way to root these for those of us stuck here. I've also tried, exhausting many many things, everything from timing of hitting loop/recovery, all the way to almost completely breaking the ADB driver on my PC. This is thoroughly frustrating the hell out of me.
By the way, add "ECHO OFF" (without the quotes) to the top of the batch file. It makes it easier to see when it reads out the offline devices.
Re: Getting passed the adb loop step
If you go to settings then pc connection . What seeting should it be? Drive , sync, or charge?
-------------------------------------
Sent via the XDA Tapatalk App

Unlock NAND on MAC anyone?

tryin to get mac to adb to device, but cannot get it to work.
anyone have success? would like to test these nice roms out.
thanks
nitty917 said:
tryin to get mac to adb to device, but cannot get it to work.
anyone have success? would like to test these nice roms out.
thanks
Click to expand...
Click to collapse
I did it on my MBP. What problems are you having?
I did it on my macbook..
I also did it on my Mac. Like someone else said what specifically is the issue you're encountering?
there is a post in about using Terminal app from the market to do this and it works!
brianb7590 said:
I did it on my MBP. What problems are you having?
Click to expand...
Click to collapse
thanks, I cant get it to communicate in terminal,
i have no idea. i dloaded the sdk, dragged the adb from tools folder,
onto the terminal, it opens up all the adb commands but after that i cant type
nothing.
nitty917 said:
thanks, I cant get it to communicate in terminal,
i have no idea. i dloaded the sdk, dragged the adb from tools folder,
onto the terminal, it opens up all the adb commands but after that i cant type
nothing.
Click to expand...
Click to collapse
Don't drag it to the terminal.
I would navigate to the directory where you stored the SDK and go to the tools folder and run it that way or you search up how to set your PATH to include the tools folder.
nitty917 said:
tryin to get mac to adb to device, but cannot get it to work.
anyone have success? would like to test these nice roms out.
thanks
Click to expand...
Click to collapse
Like the others who have already replied, I also did it on my mac and was a complete noob. It was only through much trial, error, YouTube, and 3 other sites that I figured it out. Needless to say I'm now fluent in adb and would be happy to answer any questions you have since I was in exactly the same shoes as you last weekend. Below are the biggest things you need to know when you start:
1. When you plug the phone into your computer make sure you select "Charge Only." If you select "Use Phone as Disk Drive" you won't be able to write to the phone, only read. I ran in circles for a long time getting "Read-Only File System" errors and it was all due to having the phone mounted as drive.
2. Make sure you have USB Debugging turned on. After that, you should be able to communicate with the phone fine.
3. ADB - The instructions are nearly identical regardless of operating system but on a mac you need to add "./" (without the quotes) before adb commands. For example, lets say I have a file on my desktop called "Test_File.img" that I want to push to the root of the sdcard. On my Mac I would type "./adb push /Users/Bryan/Desktop/Test_File.img /sdcard/" (without the quotes of course) & (Bryan is my Username)
4. To avoid any issues make sure none of the folders or file names you are working with have spaces in the name.
Hopefully all this helps and does no lead to more confusion than when you started. Again, if there are any specific errors you are seeing post them here and either I or someone else would be happy to answer them.
Bryan
okolowicz said:
Like the others who have already replied, I also did it on my mac and was a complete noob. It was only through much trial, error, YouTube, and 3 other sites that I figured it out. Needless to say I'm now fluent in adb and would be happy to answer any questions you have since I was in exactly the same shoes as you last weekend. Below are the biggest things you need to know when you start:
1. When you plug the phone into your computer make sure you select "Charge Only." If you select "Use Phone as Disk Drive" you won't be able to write to the phone, only read. I ran in circles for a long time getting "Read-Only File System" errors and it was all due to having the phone mounted as drive.
2. Make sure you have USB Debugging turned on. After that, you should be able to communicate with the phone fine.
3. ADB - The instructions are nearly identical regardless of operating system but on a mac you need to add "./" (without the quotes) before adb commands. For example, lets say I have a file on my desktop called "Test_File.img" that I want to push to the root of the sdcard. On my Mac I would type "./adb push /Users/Bryan/Desktop/Test_File.img /sdcard/" (without the quotes of course) & (Bryan is my Username)
4. To avoid any issues make sure none of the folders or file names you are working with have spaces in the name.
Hopefully all this helps and does no lead to more confusion than when you started. Again, if there are any specific errors you are seeing post them here and either I or someone else would be happy to answer them.
Bryan
Click to expand...
Click to collapse
If you're going to be using adb on a regular basis, and want to avoid typing "./" before each command, you can add the android sdk tools path to your .bash_profile file in your home directory. Something along the lines of:
export PATH=${PATH}:/path_for_ur_sdk_folder_location/android-sdk-mac_86/tools
mocalve said:
If you're going to be using adb on a regular basis, and want to avoid typing "./" before each command, you can add the android sdk tools path to your .bash_profile file in your home directory. Something along the lines of:
export PATH=${PATH}:/path_for_ur_sdk_folder_location/android-sdk-mac_86/tools
Click to expand...
Click to collapse
That wont be saved. It goes away after every reboot.
Fixter said:
That wont be saved. It goes away after every reboot.
Click to expand...
Click to collapse
True, if you enter it from the command line. But if you add it to the .bash_profile file , it will stick... at least on my Mac Pro it does...
mocalve said:
True, if you enter it from the command line. But if you add it to the .bash_profile file , it will stick... at least on my Mac Pro it does...
Click to expand...
Click to collapse
If I add those entering nano .bash_profile and enter that command and the pressing Ctrl X and Yes it will stick?
Fixter said:
If I add those entering nano .bash_profile and enter that command and the pressing Ctrl X and Yes it will stick?
Click to expand...
Click to collapse
It should... although I use vi instead of nano. Regardless, after saving the .bash_profile, you'll have to fully exit the terminal application and restart for the path setting to take effect. After that, it'll be in effect every time you start terminal.
mocalve said:
It should... although I use vi instead of nano. Regardless, after saving the .bash_profile, you'll have to fully exit the terminal application and restart for the path setting to take effect. After that, it'll be in effect every time you start terminal.
Click to expand...
Click to collapse
Nano is way cleaner. And yeah. It got applied.

[HOWTO] Complete Linux rooting guide (from stock to custom and back)

This post will no longer be updated and is pretty much for the archives at this point. It detailed the rooting process for Linux users right after the Slide was first rooted. Since then, newer, more foolproof methods have been devised. For those rooting their phones today (or any point since T-Mobile's OTA update), please see this link: http://forum.xda-developers.com/showthread.php?t=780213. It says it's Ubuntu-specific, but the instructions there should apply to any GNOME desktop and any other desktop with slight modification. Thanks for the comments on this thread. I hope it helped.
Most of this is not new information, but it's all in one post for the first time. I post it in case Linux (and probably MacOS) users need clarification on the process. It should keep people from having to dig in deep threads to find all the info needed. I only added the loop.sh for Linux and the partitioning information.
For all the following, I assume that the reader knows how his computer works, but not necessarily Android rooting.
Preliminary Information
1. As always, make backups and take notes. You might want to make a list of installed apps you want to reinstall later, for example.
2. Install adb. Download it here: http://developer.android.com/sdk/index.html. adb is a little program distributed as part of the Android software development kit (SDK). Its job is to communicate with the phone from a shell (terminal). To install adb, I strongly suggest you copy the adb file from the tools directory into your system's /usr/local/bin directory. This way, it will always be in your path. If you don't intend to do development work on Android applications, feel free to delete the rest of the SDK after installing adb.
3. Start adb as root. In more traditional Linux distros, this can be done by typing "adb devices" in a root terminal ("su" then "adb devices"). In Ubuntu-based distros, "sudo adb devices" followed by your password should do the trick. You'll get a message about the adb daemon being started. If not, sometimes typing "adb root" or "adb start-server" as root will do the trick.
4. Make sure your phone has "USB Debugging" checked off in Settings > Application > Development
5. It may not make any difference, but I turn off the "disk drive" option, so that my SD card doesn't mount when the phone is plugged in via USB (unless I need it to).
Partitioning the SD Card (Optional)
This is an optional step, as ROMs are coming out now that allow swapsace (virtual memory) and apps2sd (installing applications to the SD-card rather than on the phone's internal memory). Right now, most Slide ROMs support apps2fat32, so the whole card can be left as is (one, big, fat32 partition). If your desired ROM supports apps2sd using an ext2 or ext3 partition, you can save some headache later by doing this step first. If you don't want it, just skip to the next section.
1. Using the package manager for your Linux distro, install parted. GNOME users have a great, graphical frontend to this utility called gparted. KDE users have the KDE Partition Manager available to them. I only have gparted, but the instructions should be similar for all variants. The graphical frontends take a lot of the pain away from using parted (automatically formatting for ext4, for example). For the braver souls, there is a much more detailed tutorial for using vanilla parted from the command line here: http://forum.xda-developers.com/showpost.php?p=4098568&postcount=1.
2. Mount your sd-card, either using the "disk drive" function of the phone, or in an external card reader.
3. Make a backup of your sd-card by simply copying and pasting to a new folder.
4. Start up the partition manager of your choice with root permissions (using gksu or kdesu).
5. Make sure your desktop environment (KDE or GNOME) or a terminal doesn't have a file manager window open to the sd-card partition. You can't unmount a partition that's being accessed.
6. Find out which device node is assigned to the partition by typing "dmesg" in a terminal. The last few lines should tell you how it's assigned. Mine was /dev/sdg1, for example.
7. Using the dropdown menu, select your sd-card partition in parted.
8. Right-click on the partition in the bottom pane of the window and select "unmount".
9. Delete the partition using the same, right-click menu.
10. Now you're left with free space to configure as you see fit. You use the same right-click menu to create partitions.
11. When done, click "apply" and the partition manager will create and format the partitions you've selected.
12. When done, the computer should mount two partitions from the card, one for apps, the other for user data. Copy your backed-up files to the larger partition.
NB: Android phones can work with a smallish ext* partition at the beginning of the card for apps (around 512MB should be more than enough for almost anyone), a super-small swapspace in the middle (no more than 32MB, if any at all--it's up for debate whether the Slide benefits from swapspace at all), and the rest of the card formatted as FAT32 for the "normal" partiton. I'll leave those decisions to those who have the need and desire. Also, whether to use ext2,3, or 4 for the apps partition is a matter for debate, and some kernels for other phones didn't support the newer versions at all. All that is beyond the scope of this howto, mainly because I won't be trying it out.
NB2: Eugene has released Koushik Dutta's recovery scripts that can help automate the partitioning process. It can be done directly from recovery, rather than on the computer. I much prefer the old way, as it gives more flexibility. For reference, the post with instructions is found here: http://forum.xda-developers.com/showpost.php?p=6993132&postcount=1.
Getting root (original HOWTO at: http://forum.xda-developers.com/showpost.php?p=6820344&postcount=1)
The following instructions are "the old way" to gain root. There is a new method found at: http://forum.xda-developers.com/showpost.php?p=7658764&postcount=1 that seems to be a saner process, but I have not tested it as of yet.
1. Download the Slide Root package: http://outboundlink.us/anxo/dr_ta_1...ttp://www.4shared.com/file/IfrPbWG7/Root.html
2. Extract it somewhere convenient (I'm using the Desktop folder here. I'm also renaming the folder "slideroot" to keep things simple).
3. Open a terminal and cd to the slideroot folder you just created.
4. The "loop.bat" file here is of no use to you. Use a text editor to make your own loop.sh file, or edit loop.bat and rename it when you're done. It should contain the following:
Code:
#!/bin/sh
watch -n .50 adb devices;
done
5. Power on the slide while holding down the Volume-down button. This will bring you to the bootloader screen (three droids on skateboards). Plug the Slide in via USB.
6. Just to make sure everything is working correctly, type "adb devices" in the terminal to make sure the system is seeing your phone properly. If so, run your loop.sh by typing "sh loop.sh".
7. Use the Volume-down button on the phone to select "recovery" and press the power button to enter. The terminal will flash a few messages like "offline" and "recovery". When the phone's screen shows an icon of a phone with a red triangle, you know it worked.
8. Press Volume-up and Power together to enter the recovery menu on the phone.
9. Now, back in your terminal, hit "ctrl-C" to cancel the loop.sh script.
10. Type "adb push ota.zip /sdcard/update.zip" and hit enter.
11. Type "adb push update.zip /sdcard" but DO NOT hit enter yet.
12. This step requires some coordination and timing. On the phone, select "run update.zip" and press the power button. When you see a little greenish progress bar at the bottom in the background, hit enter in your terminal.
13. If it worked as planned, the phone will see the keys from the first file you pushed, and then use the file you're pushing now to run clockwork recovery. If not, don't worry. Just repeat. I haven't had to do it more than once yet.
14. Once this is done, reboot the phone from the menu system and wait. You can use "adb devices" in the terminal to see if the phone is detected.
15. Type "adb shell" and look for the "$" prompt. If you type "su" you should get a "#" (root) prompt. Give yourself a pat on the back.
Installing the Engineering ROM (original HOWTO at http://forum.xda-developers.com/showpost.php?p=6821968&postcount=1)
A. Now that your phone is rooted, you can "downgrade" it to the Engineering ROM. This gives a better recovery environment that allows other ROMs to be installed (custom ROMs are signed with the test keys; the original recovery will not install them since it looks for your carrier's keys.)
B. Download two files: http://outboundlink.net/anxo/dr_ta_1/goto.php?DR_id=1359&linkout=http%3A//www.4shared.com/file/OsmF_ZD7/ESPRIMG.html and http://www.4shared.com/file/sz0VO2TL/SlideEng-package.html.
C. I extracted the SlideEng-package.zip, copied the contents inside loose to the Desktop, and copied the ESPRIMG file to my sd card.
1. cd to the Desktop and type "adb push flash_image /data/local" and hit enter.
2. Type "adb push mtd0.img /data/local" and hit enter.
3. Start an adb root shell as above ("adb shell" then "su")
4. Type "cd /data/local"
5. Type "chmod 04755 mtd0.img" and "chmod 04755 flash_image". I didn't change any permissions on the other files in that folder, just in case.
6. Type "./flash_image misc ./mtd0.img" and hit enter.
7. Power off the phone.
8. Holding Volume-down, power the phone back up. The recovery will scan the sd card and automatically detect the update file (from step "C" above) and prompt to install it. Hit Volume-up to install.
9. You're done. Just reboot the phone after the update and you're good to go. The boot process will be a little longer this time around.
Updating the Radio (May be optional) (Original HOWTO at: http://forum.xda-developers.com/showpost.php?p=6856313&postcount=1)
I leave this section here for archive purposes. Since switching the ROM to ChiefzReloaded's OTA in the "Installing a custom ROM" section below, this step is no longer necessary, as it contains the newest radio. Unless you're installing a custom ROM released before the last T-Mobile over-the-air update, feel free to skip this section.
When we downgraded the system to the Engineering ROM, we downgraded our radio as well. The following instructions will bring us back to the stock radio version.
1. Download the following file: http://files.androidspin.com/downloads.php?dir=chiefzreloaded/ROM/&file=Newest_Slide_Radio.zip and copy it to your sd-card.
2. Remember that update.zip way back in the rooting section? The one found in the slideroot package? Copy it to your sd-card as well, if it's not already there. I deleted the one on my sd-card and re-copied it, just in case. It contains the clockwork recovery and can be left on your sd-card for future upgrades.
3. Reboot the phone into recovery (should be easy now.)
4. Select "apply update.zip from sd card" to start clockwork recovery. No looping necessary anymore!
5. From the clockwork menu system, apply the Newest_Slide_Radio.zip file you just copied over.
6. Once that's done, just reboot. The boot process will take longer and you'll see a few crazy icons before the system finally loads up. When all is finished and you're back to the home screen, the phone will pop up a dialog telling you the update was successful.
Installing a Custom ROM (Original HOWTO at: http://forum.xda-developers.com/showpost.php?p=6827968&postcount=1)
For this install, I'm using the new OTA update rooted by ChiefzReloaded. Complete information on this ROM is here: http://forum.xda-developers.com/showpost.php?p=7534163&postcount=1. Like the older SLIDEMEROOT2 I had here before, I picked it because it's mainly the same, stock ROM the phone shipped with, but with root. I had way too many "fast, stable, feature-packed" custom ROMs on other phones that really weren't that fast or stable. I don't want to lose the use of my camera/camcorder to have live wallpapers, for example. These instructions will work for any custom ROM (adjusting for the new ROM in step 1 and 4.)
1. Download the following file: http://db.androidspin.com/androidspin_filedownload.asp?release=330&type=1 and copy it to your sd card.
2. Boot the phone into recovery mode.
3. From the recovery menu, select "apply update.zip from sd card". As stated earlier, this update.zip file contains the clockwork recovery. Applying it like an update will always load clockwork from now on.
4. In the clockwork menu, select "apply any zip from sd card" and select CR_Mod_1.35.531_OTA.zip.
5. Let the update take its course, reboot, wait, and enjoy.
Going Back to Stock (Just in case) (Original HOWTO at: http://forum.xda-developers.com/showpost.php?p=6994424&postcount=1)
There may come a time when you might need your phone just the way it came from the store. It could be that you're tired of custom ROMs, a feature you find you can't live without is broken, or you need to return the phone for warranty purposes. If it gets to that point, here's how:
1. Download the following file: http://outboundlink.net/anxo/dr_ta_1/goto.php?DR_id=1359&linkout=http%3A//www.4shared.com/file/x7HRRsbM/ESPRIMG_2_.html and copy it to your sd-card.
2. Reboot the phone into recovery (just the regular one, not clockwork). The file will be automatically detected.
3. After checking the file, you'll have to hit Volume-Up to confirm the flash.
4. Once done, reboot and the Slide will be good as new.
Very nice!
I kind of wish I would have seen this before I rooted this morning!
I just rooted mine this afternoon. Figured I'd put it up while I still had it in my head.
Excellent summary!
I also wish I'd seen this before muddling through the other guides myself. Thanks for posting it!
Quick question. I plan on rooting my MyTouch Slide within the next couple days. I was just reading over your list and thought I'd try to move the adb file first. After I moved it to /usr/local/bin, and then opened a root terminal. I typed "adb", but nothing came up about a dameon being started. It looked like I had asked for the man page. Any idea why? Or if it started it anyway?
The first time you run adb, do so as root "sudo adb devices", "sudo adb root" or the equivalent. It will start the daemon. A normal user (ie, not superuser) will not have the permissions to start a daemon.
When you run just "adb" without any options, it shows you the command-line options you can use with adb. Most Linux command-line apps work the same way when run without options.
beartard,
huge props to you. this is, by far, the best guide for rooting anything that i have ever used, and certainly for the slide.
as mac osx is a *nix system, this worked great. none of the steps were missing, everything was a normal sized font, and left justified, and took me from the stock to a custom rom flawlessly.
thanks a bunch.
really.
I'm very glad it worked for you. Thanks! Did you have to do anything differently under MacOS? I used to use it before OS X came out. I know the newer versions are based on *nix, but I didn't know how similar they were underneath.
I didn't do very much differently.
I started with "How to get Root" section, as I didn't want to partition my sdcard and already had the SDK installed (obviously, though I really need to look into working with it more, as right now it scares the bejesus out of me).
I used a "do while [1]" style (I love accidentally rhyming) loop.sh file though, mostly because my terminal couldn't understand "watch" for some silly reason.
Your guide was just the one that felt the least like a tween myspace page (no offense to the other guides).
Ok, I am re-rooting my slide after having to get a replacement. I am trying to get it done using the newest ubuntu. I am a newb to ubuntu but I was able to get adb setup. When the device is booted up normally I can adb devices and recognize the device.
When I boot the phone into fast boot and adb it does not find anything. I went ahead and ran the loop.sh file and started recovery And saw the device pop up for a split second so I CTRL-C.
It does the same thing that it did when I rooted my old slide With XP. It saw the device but as soon as I CTRL-C its gone. I can do a battery pull, rerun the loop and boot into recovery and it wont find it.
Is this crap gonna be the same as on windows where you just gotta get lucky and get it to recognize? Sit here for hours on end every day until it gets recognized?????
By the way I am running everything as Root by typing sudo su in terminal before I start.
sultan.of.swing said:
Ok, I am re-rooting my slide after having to get a replacement. I am trying to get it done using the newest ubuntu. I am a newb to ubuntu but I was able to get adb setup. When the device is booted up normally I can adb devices and recognize the device.
When I boot the phone into fast boot and adb it does not find anything. I went ahead and ran the loop.sh file and started recovery And saw the device pop up for a split second so I CTRL-C.
It does the same thing that it did when I rooted my old slide With XP. It saw the device but as soon as I CTRL-C its gone. I can do a battery pull, rerun the loop and boot into recovery and it wont find it.
Is this crap gonna be the same as on windows where you just gotta get lucky and get it to recognize? Sit here for hours on end every day until it gets recognized?????
By the way I am running everything as Root by typing sudo su in terminal before I start.
Click to expand...
Click to collapse
I'm not sure what the problem is, man. I've never had to try more than once using the process above. You're using a new install of ubuntu. Do you have adb from the latest sdk?
Just added the link to a new method for rooting and updated a few minor points.
Updated partitioning info to reflect what's actually going on in the MT3GS world.
Changed custom ROM to ChiefzReloaded's OTA, eliminating the need for the "updating the radio" section.
Beartard, I want to say thank you for taking the time for typing this all out. It worked like a charm with not one problem. I have spread your link to others so they can get the same satisfaction I got from this thread. Thanks again

[Tutorial] Rooting Your Device in Linux

Root Galaxy Nexus (Either GSM or LTE) in Linux (Personally in Ubuntu)
Disclaimer: I am not at fault for anything you have done to your phone (ie. Brick, break, etc.). You are doing this at your own discression. I am merely stating what I did to unlock/root my phone.
Tutorial Broken Down Into Three Sections
I. Unlocking the bootloader
II. Installing Clockwork Mod Recovery
III. Installing SuperUser
Resources
1. Super User (used by flashing in Clockwork): http://download.clockworkmod.com/test/su.zip
You can get the latest version here: SuperUser by ChainsDD
2. Clockwork – based by carrier
1. Verizon (CDMA) version: CMW Galaxy Nexus
File name:*recovery-clockwork-5.5.0.4-toro.img
MD5:*b2d31c29b7ef785f9c0802a12264d322
File size:*5,263,360*(bytes)​
2. GSM version: CMW Galaxy Nexus
File name:*recovery-clockwork-5.5.0.2-maguro.img
MD5:*445887336a863573997ccbaeedddc984
File size:*5,427,200*(bytes)​
Unlocking Bootloader
Part 1: Unlock
1. First off, you need to download the adb drivers. There have been mentions of just getting the drivers, but I actually have the entire SDK. You can download it here. http://developer.android.com/sdk/index.html
2. Plug in your device, then open up Terminal (Ctrl + Alt + T) and type in: “lsusb” (without quotes). This will pull up all the devices plugged into your usb slots. Look for the one that says samsung (others have found google, but please make note).
3. Find the device, then find where it says ID. After where it says ID, it should have a number/letter mix such as “04e8” or such. Make note of that for later.
4. Go to http://developer.android.com/guide/developing/device.html . This will give the instructions on how to Install the device drivers (specific to each manufacturer). Start from where it says “4. Set up your system to detect your device.”
5. Go to your internal and cd to platform-tools. (This should include both adb and fastboot.) Put your phone into fast boot. (Do this by holding the power, volume up, and volume down buttons while phone is off).
6. Once in fastboot, go back to your computer and type in “sudo fastboot oem unlock”. This will bring up the option to unlock your phone's bootloader on your device's screen. It will give you a disclaimer, and it will say that if you unlock, it will wipe all of your phone's data. Scroll to Yes using the vol up or vol down buttons, and select it with the power button.
7. If you boot straight from there, you will go through a series of boot loops (it was 2 for me) then will be prompted to go through the process of setting up your Google account again. again.​
Congratulations, your phone is now unlocked. However, this doesn't mean that you have rooted your phone.
Rooting
Part 2: Putting Clockwork Mod Recovery On Your Phone
(do step one for preparation of Part 3)
1. First, we will want to push su.zip to your phone's Internal storage or “sdcard” partition. Open up Terminal and type the command “adb push 'directory_of_su.zip'/su.zip /sdcard/”. Hit enter/return and it should transfer over. (Based on the quality of usb cord, times of transfer may vary.)
To make this easier, put su.zip into the directory of adb. Then all you have to use for the command is “adb push su.zip /sdcard/”.​EDIT:
After you root, you have to delete /system/recovery-from-boot.p and reflash or else every time you reboot, the recovery partition will be written over by android. This can either be done in terminal (phone or comp) or by a file manager with root access (such as Root Explorer).
Reference: http://forum.xda-developers.com/showthread.php?t=1392336
Thanks vihil
2. Put your phone in fastboot mode again (vol up + vol down + power)
3. Go back to Terminal and type in “fastboot flash recovery 'whatever the file name is'”. This will flash CWM (Clockwork Mod) onto your phone, deleting your phone's stock recovery image.
EDIT: If it doesn't work, i.e. due to permissions, run with sudo​
Part 3: Flashing Super User onto your phone.
1. Next, go into Clockwork by hitting the volume up or down buttons till you see recovery mode. Hit the power button to enter Clockwork.
2. Scroll down (using volume buttons) till you get to “install zip from sd card”. Use the power button to select it.
3. Scroll down to “su.zip” and select it. Then, hit the selection for installing the zip file.
4. Go back using the “Go Back” selection to return to the main screen.
5. Reboot the system using the “reboot system”.​
Congratulations! You now have Root access!!!
Have fun with Flashing ROMs!
Special Thanks to scary alien on androidforums.com and jcarrz1 on XDA
Reserved
Reserved......
Thanks a lot I was looking for exactly this. Appreciated. Will try in a few hours when I get my phone.
Downloaded the sdk file but have no idea what to do. My windows computer died and it would be a lot easier on that to do all this but all I have is a computer with linux currently so if anyone would be kind enough to tell me how to install sdk I'd appreciate it. I seen the read me and seen it says execute "android" first but I don't know how to do that. I realize this is incredibly annoying to the xda hive mind trust me I hate needing help like this I'm nothing close to a noob as far as rooting flashing and all that good stuff I'm just unfortunately stuck with only Linux. I'd really really appreciate it.
under the tools folder there is a script called android, u can either run it in a terminal or hopefully if u were to click it, it was ask if u want to run it!
If you want to run it, you can just cd to it in terminal, then do "./android" and that should do the trick.
./ is the way you execute scripts in linux.
Seems like my fastboot is stuck on `waiting for device`. I have the fastboot screen on my GN.
Before rebooting into fastboot `adb devices` successfully showed a device (i.e., usb debugging is enabled, dunno whether it is needed for the unlocking):
$ fastboot oem unlock
< waiting for device >
Any idea?
EDIT: Found the solution. After doing a `fastboot devices` it told me "no permissions fastboot" so I needed to be root on my computer for it to work.
FadedLite said:
If you want to run it, you can just cd to it in terminal, then do "./android" and that should do the trick.
./ is the way you execute scripts in linux.
Click to expand...
Click to collapse
Thank you! That worked correctly and installed it. Now the next step to check the usb and if its there does not work, I might be entering this incorrectly but I typed just lsusb and enter nothing happened, held down ctrl, alt, t then typed in lsusb and nothing happened then just copied that entire part encase I was suppose to and got this.
[[email protected] ~]$ (Ctrl, Alt, T): lsusb
bash: syntax error near unexpected token `:'
Like I said I'm not expecting help because I know XDA doesn't like noobie questions, I will be greatly appreciative if you have patience with me and will even be willing to donate once I unlock the BL and root it. Thank you again.
C-4Nati said:
Thank you! That worked correctly and installed it. Now the next step to check the usb and if its there does not work, I might be entering this incorrectly but I typed just lsusb and enter nothing happened, held down ctrl, alt, t then typed in lsusb and nothing happened then just copied that entire part encase I was suppose to and got this.
[[email protected] ~]$ (Ctrl, Alt, T): lsusb
bash: syntax error near unexpected token `:'
Like I said I'm not expecting help because I know XDA doesn't like noobie questions, I will be greatly appreciative if you have patience with me and will even be willing to donate once I unlock the BL and root it. Thank you again.
Click to expand...
Click to collapse
You don't really need that step. Since '04e8' is Samsung and you have a Samsung device it will likely always be 04e8.
Part 1, 3. and 4. can be summarized as following:
Put the following line into /etc/udev/rules.d/51-android.rules:
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666", GROUP="plugdev"
Execute: chmod a+r /etc/udev/rules.d/51-android.rules
Type the following to verify it is working: "adb devices" It should display something like:
List of devices attached
01492B093401000F device
Part 1, 6. should probably changed to "sudo fastboot oem unlock"
Also, Part 2, 1. the preparation makes no sense to me: "(do step one for preparation of Part 3)". How can I go into Clockwork recovery before completing Part 2? Since Part 2 is about installing Clockwork...
Edit: And I just realised, C-4Nati, you should not write the "(Ctrl, Alt, T):" out.. that's just a shortcut to open a terminal. Just "lsusb" is fine. Then it should work.
---------- Post added at 11:33 AM ---------- Previous post was at 11:09 AM ----------
For anyone wondering why the step by step instructions in the OP do not work:
You need to flash the Clockwork recovery and install su.zip before you can remove the /system/recovery-from-boot.p (and if you follow that link provided it will cost you around $3.50 but you should be able to do it manually, will try to figure it out).
---------- Post added at 11:38 AM ---------- Previous post was at 11:33 AM ----------
(I couldn't find the /system/recovery-from-boot.p on my GN filesystem but maybe someone else does)
To remove /system/recovery-from-boot.p:
$ adb shell
$ su
# mount -o rw,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
# rm /system/recovery-from-boot.p
# mount -o ro,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
For simplicity, you can shorten that to: mount -o rw,remount /system
You can also delete it from a terminal on the phone or any file manager that allows root access. I think the free ES file explorer has root options.
vihil said:
You don't really need that step. Since '04e8' is Samsung and you have a Samsung device it will likely always be 04e8.
Part 1, 3. and 4. can be summarized as following:
Put the following line into /etc/udev/rules.d/51-android.rules:
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666", GROUP="plugdev"
Execute: chmod a+r /etc/udev/rules.d/51-android.rules
Type the following to verify it is working: "adb devices" It should display something like:
List of devices attached
01492B093401000F device
Part 1, 6. should probably changed to "sudo fastboot oem unlock"
Also, Part 2, 1. the preparation makes no sense to me: "(do step one for preparation of Part 3)". How can I go into Clockwork recovery before completing Part 2? Since Part 2 is about installing Clockwork...
Edit: And I just realised, C-4Nati, you should not write the "(Ctrl, Alt, T):" out.. that's just a shortcut to open a terminal. Just "lsusb" is fine. Then it should work.
---------- Post added at 11:33 AM ---------- Previous post was at 11:09 AM ----------
For anyone wondering why the step by step instructions in the OP do not work:
You need to flash the Clockwork recovery and install su.zip before you can remove the /system/recovery-from-boot.p (and if you follow that link provided it will cost you around $3.50 but you should be able to do it manually, will try to figure it out).
---------- Post added at 11:38 AM ---------- Previous post was at 11:33 AM ----------
(I couldn't find the /system/recovery-from-boot.p on my GN filesystem but maybe someone else does)
To remove /system/recovery-from-boot.p:
$ adb shell
$ su
# mount -o rw,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
# rm /system/recovery-from-boot.p
# mount -o ro,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
Click to expand...
Click to collapse
for needing to type in lsusb, i found that as somewhat of a precaution. I had seen on other threads that others had their device show up as either google or samsung. So i just figured rather check first instead of installing both or something.
for the preparation, basically you do that since your phone is already on. after flashing cwm, you would have to boot back into your phone, push the file to your sdcard, then boot back into recovery. All it does is that it saves just a bit of time.
As for the sudo fastboot, I didn't actually have to do that, but i'll add it, Thanks.
As for the cwm terminal commands, i'll add that as well. Thanks again.
FadedLite said:
Part 3: Flashing Super User onto your phone.
1. Next, go into Clockwork by hitting the volume up or down buttons till you see recovery mode. Hit the power button to enter Clockwork.
2. Scroll down (using volume buttons) till you get to “install zip from sd card”. Use the power button to select it.
3. Scroll down to “su.zip” and select it. Then, hit the selection for installing the zip file.
4. Go back using the “Go Back” selection to return to the main screen.
5. Reboot the system using the “reboot system”.​Congratulations! You now have Root access!!!
Have fun with Flashing ROMs!
Click to expand...
Click to collapse
not yet. after flashing su-bin-3.0.3.2-efghi-signed.zip (which is just the binary), the user still needs to flash Superuser-3.0.7-efghi-signed.zip, to have Superuser.apk placed in /system/app, otherwise GUI apps won't have access to su. (unless, of course, the zip you are linking here has them both)
It's preferable to have users linked to ChainsDD website, there people will find latest binaries and Superuser.apk. I also don't see any mention to him in the OP. Even if this is a tutorial, don't forget to give credit where needed.
Some help for an Ubuntu Noob/Not a Noob to Windows
Hi all,
Long story short, I no longer have Windows (nor a way to load Windows without a purchase; I'd rather not). So I have a fresh install of Ubuntu Linux 11.10. I have read this guide and some of the helpful responses and have yet to be able to get adb and fastboot up and running. I am beginning to understand the nuances of Ubuntu and have tackled adb and fastboot in Windows but Ubuntu is different. I would say I have put in two 12 hour sessions with no desire to pack it in and go back to Windows (I am avoiding a VM as well).
Here is where I seem to be stuck (mind you I have done a fresh install numerous times to start with a fresh playing field in case I have messed up something): Whether downloading the full SDK through Eclipse (cos I'd like to dev apps soon and why not have it?) or downloading the SDK on its own, I get it without fail. The steps leading up to entering in commands for terminal so that the computer recognizes either just my Nexus or a slew of OEMs are easy enough but maybe I am messing up. It is where getting the computer to see my device (udev steps) I can't seem to get it right. I have even looked at other guides for reference (most seem messy and convoluted) but keep coming back here.
I know you probably need more to go on and I am sooooooo willing to tell more. I just hope someone is down to help a brother out. Like I said, I just need some direction. I have manually rooted and all that jazz, just in windows. Thanks in advance for your help.
jmar
jmartino5920 said:
Hi all,
Long story short, I no longer have Windows (nor a way to load Windows without a purchase; I'd rather not). So I have a fresh install of Ubuntu Linux 11.10. I have read this guide and some of the helpful responses and have yet to be able to get adb and fastboot up and running. I am beginning to understand the nuances of Ubuntu and have tackled adb and fastboot in Windows but Ubuntu is different. I would say I have put in two 12 hour sessions with no desire to pack it in and go back to Windows (I am avoiding a VM as well).
Here is where I seem to be stuck (mind you I have done a fresh install numerous times to start with a fresh playing field in case I have messed up something): Whether downloading the full SDK through Eclipse (cos I'd like to dev apps soon and why not have it?) or downloading the SDK on its own, I get it without fail. The steps leading up to entering in commands for terminal so that the computer recognizes either just my Nexus or a slew of OEMs are easy enough but maybe I am messing up. It is where getting the computer to see my device (udev steps) I can't seem to get it right. I have even looked at other guides for reference (most seem messy and convoluted) but keep coming back here.
I know you probably need more to go on and I am sooooooo willing to tell more. I just hope someone is down to help a brother out. Like I said, I just need some direction. I have manually rooted and all that jazz, just in windows. Thanks in advance for your help.
jmar
Click to expand...
Click to collapse
Are you getting a "waiting on device" message or something similar when you run adb or fastboot?
Forget about the udev nonsense (not important really until you start developing full time) and just drop a sudo before your commands.
You can shoot me a PM or a gtalk (same username as my xda) if you want and I'd be more than happy to help you get your system going.
Thanks, still a bit more annoying that Windows but this tutorial makes it easy.
Sorry if this is ignorant, but can I use these instructions with Unix & terminal on Mac OS X? I'm thinking yes???
I rooted mine in linux as well... No problems. For some reason I was able to do it much easier though...
I did the fastboot oem unlock step above (Part 1). Rebooted then installed superuser from the android market. Then I installed Clockworkmod from the android market.
Done.
Not sure if I'm missing out on something by doing it this way but so far I've had no issues....

[Q] My S3 stuck in boot loop

Hello,
if is one here to help me i wil give him thousands bottles with beers.
My s3 is stuck in boot loop, i cant to pass samsung logo, i cant to go in cwm or download mode. I have tried to connect on my pc via usb cable but nothing is happening, i have all drivers installed but odin cant to recognized my phone, i think debugging mode is off. When the phone is off and i connect the charger he show me battery what he trying to get power but is not green.
I attach two photos to be more suggestive.
How can to pass this logo to go in cwm or to make this phone to be recognized by odin?
Thank you for reading me and for your answers.
regards,
florin
DobreaFlorin said:
Hello,
if is one here to help me i wil give him thousands bottles with beers.
My s3 is stuck in boot loop, i cant to pass samsung logo, i cant to go in cwm or download mode. I have tried to connect on my pc via usb cable but nothing is happening, i have all drivers installed but odin cant to recognized my phone, i think debugging mode is off. When the phone is off and i connect the charger he show me battery what he trying to get power but is not green.
I attach two photos to be more suggestive.
How can to pass this logo to go in cwm or to make this phone to be recognized by odin?
Thank you for reading me and for your answers.
regards,
florin
Click to expand...
Click to collapse
First question.. Do you have the I9300 (is the international version of the S3) Sprint version is SPH-L710.. If you have the 710 and flashed I9300 stuff.. you probably bricked your phone. If you DO have the I9300 version, I would pop over to that section of the forums and ask there... Here's the I9300 Section. http://forum.xda-developers.com/forumdisplay.php?f=1563
They are not compatible sadly due to different hardware, so flashing something from here will break your I9300.
Ive been where you are about three times. What i have had to do is plug my phone into the computer and have terminal or cmd prompt open.
I have to navigate to a folder that has ADB in it.
I start the bootloop on the phone and when i see the samsung logo boot up i execute the command
./adb reboot recovery
in windows i think you have to go
adb
reboot recovery
not sure though because i currently dont have a windows machine at my disposal. But you have to time this right. There is a few seconds in the bootloop where you have the ability to adb into the phone and force it to reboot into recovery this way you can flush the bad rom/kernel you accidentally flashed.
Hope this helps.
Thank you for your helpp, quick answers, you are the best form internet. All the time i get solve here in xda.
Solved, my battery it was under 25% and he cant to pass on download mode, i charged to 100% and now i can to flash what i want in download mode.
Thank you again for your quick answers.
Regards,
Florin
Hamspiced said:
Ive been where you are about three times. What i have had to do is plug my phone into the computer and have terminal or cmd prompt open.
I have to navigate to a folder that has ADB in it.
I start the bootloop on the phone and when i see the samsung logo boot up i execute the command
./adb reboot recovery
in windows i think you have to go
adb
reboot recovery
not sure though because i currently dont have a windows machine at my disposal. But you have to time this right. There is a few seconds in the bootloop where you have the ability to adb into the phone and force it to reboot into recovery this way you can flush the bad rom/kernel you accidentally flashed.
Hope this helps.
Click to expand...
Click to collapse
hello can you please be specific how to go in adb folder can you please assist with if some kind of tutorial is there I have the same problem and I havent slept from last two nights trying to solve it please help me
rishidgr8143 said:
hello can you please be specific how to go in adb folder can you please assist with if some kind of tutorial is there I have the same problem and I havent slept from last two nights trying to solve it please help me
Click to expand...
Click to collapse
What S3 do you have and exactly what is wrong with it?
Have a great day!
edfunkycold said:
What S3 do you have and exactly what is wrong with it?
Have a great day!
Click to expand...
Click to collapse
I have GT-I9305
i installed cm 10.2 few days ago
it restarted suddenly and keeps restarting again and again
I cant enter into recovery mode nor in download mode
I some how manage to enter into recovery mode it starts again and give no time wipe factory data same is with download mode
please help me
rishidgr8143 said:
I have GT-I9305
i installed cm 10.2 few days ago
it restarted suddenly and keeps restarting again and again
I cant enter into recovery mode nor in download mode
I some how manage to enter into recovery mode it starts again and give no time wipe factory data same is with download mode
please help me
Click to expand...
Click to collapse
Ok your in the wrong section, this is Sprint d2spr. So you should be posting in the forum for your device.
But most likely what you have is SDS sudden death syndrome. Which means your power button has failed. Very common on the S3 devices. Try jiggling the power button maybe blowing some compressed air into the power button area. See if it will dislodge. It is a known defect.
Have a great day!
edfunkycold said:
Ok your in the wrong section, this is Sprint d2spr. So you should be posting in the forum for your device.
But most likely what you have is SDS sudden death syndrome. Which means your power button has failed. Very common on the S3 devices. Try jiggling the power button maybe blowing some compressed air into the power button area. See if it will dislodge. It is a known defect.
Have a great day!
Click to expand...
Click to collapse
Thanks I will try doing that. I hope this works
Stuck at splash screen.
Help! I have a D2SPR and was flashing my nightly for 9/6/13 CM10.2... and now I can't get past the splash screen. What, if anything, can I do to get recovery to boot? (yes, it was a dirty flash(
Power button + volume up + home button at same time should get you into recovery.
Have a great day!
same issue
I have the Sprint SPH-L710 and flashed a Cyanogenmod nightly this morning. At this point, the phone will not boot. I can get to the Samsung screen but there it hangs. I can also get the phone connected to a computer and Odin sees it but I can't do much else with it. Any thoughts on how to force it into recovery from Odin? Any help would be much appreciated.
midkemiapug said:
I have the Sprint SPH-L710 and flashed a Cyanogenmod nightly this morning. At this point, the phone will not boot. I can get to the Samsung screen but there it hangs. I can also get the phone connected to a computer and Odin sees it but I can't do much else with it. Any thoughts on how to force it into recovery from Odin? Any help would be much appreciated.
Click to expand...
Click to collapse
I was able to get into recovery mode after flashing the CWM recovery mod from here: http://forum.xda-developers.com/showthread.php?t=2391616. I also took a look at the Cyanogenmod forum here: http://forum.cyanogenmod.com/topic/77958-20130906-stuck-on-boot-screen-dont-install/.
johnbistricky said:
Help! I have a D2SPR and was flashing my nightly for 9/6/13 CM10.2... and now I can't get past the splash screen. What, if anything, can I do to get recovery to boot? (yes, it was a dirty flash(
Click to expand...
Click to collapse
Pull battery then do the recovery button combo. It is a a known issue that that nightly doesn't boot. You could just dirty flash another nightly that does work. May break some things though.
------------------------
Sprint Galaxy S3
Need Help? PM
Hit the "Thanks" button if I helped!
@rishidgb
what ive had to do in the past to resolve these issues. Ill Copy/Paste the instructions i have used to Install ADB on my past computers but ill also throw links for the origionals at the bottom of the post.
1. Verify Battery is at least 50% charged. I usually do this by turning the phone off and plugging it into the charger, you should be able to see the battery charging up.
2. Install ADB on your computer. I have a mac, and this was kind of a pain in the ass to do at first but ill explain.
Mac-
1. Download the latest Android SDK from Google: Android SDK - http://developer.android.com/sdk/index.html
2. Extract the ZIP file to your desired location
3. To get ADB, you need to install the SDK: Installing the SDK - http://developer.android.com/sdk/installing/index.html
If you are not a developer and not planning to develop, then just download the following zip file containing only the ADB tool and
proceed with the tutorial: ADB - http://esausilva.com/wp-content/plu...silva.com/misc/android/platform-tools-osx.zip
Create an environment variable (Optional) **This is good because once you create the variable you dont have to navigate to the ADB folder every time to use it.
1. Open Terminal
2. Type cd ~ this will take you to your home directory
3. Type touch .profile this will create a hidden file named profile
4. Type open -e .profile this will open the file you just created in TextEdit
In the file, type export PATH=${PATH}:/pathToTheAndroidSdkFolder/android-sdk-mac_86/platform-tools
Save file, close TextEdit, Quit Terminal, and Relaunch Terminal
NOTE: By creating an environment variable you won’t need to cd to the Android/tools folder every time you want to run ADB
You are good to go, type in terminal adb devices, this should give you a serial number, which corresponds to your phone. Looks something like this:
List of devices attached
HT99PHF02521 device
NOTE: If you did not create an environment variable, then cd to the AndroidSDK/platform-tools folder, then type ./adb devices
Also make sure you have your phone plugged in and have USB Debugging turned on (Settings > Applications > Development)
In Android 4.2.x and up Developer Options is hidden, to make it visible, do the following
Tap seven times in Build Number: Settings > About Phone > Build Number
You will get a message saying you have enabled Developer Options or something like that, go back to Settings and you will see Developer Options in there.
PC-
Step 1: Head over to this link to download the latest version of Android SDK. http://developer.android.com/sdk/index.html
Step 2: Extract the contents of the downloaded file to your hard drive. Within the unzipped “sdk” folder, you’ll find another folder labeled ‘platform-tools’. Since we’re interested in only ADB and Fastboot, this is the one that we’re looking for.
Step 3: Move the platform-tools folder to a convenient location on your PC. The root of C: drive is usually a good idea. I also recommend renaming the folder to something easier, like C:\Android-adb.
By this point, ADB is essentially set up, but to use it, you’ll first need to navigate your command prompt window to this Android-adb folder, and then run all ADB commands inside it. Since it’s too much hassle for most users, we’ll add this location to Windows’ System Path Variable, so you can run ADB commands from anywhere.
Step 4: Right-click the Computer icon on your desktop, and go to Properties.
Step 5: Under System Properties, go to the Advanced tab, and click Environment Variables.
Step 6: The system variables are contained within the lower pane. Locate “Path” here, highlight it, and click the Edit button.
Step 7: There will already be a string of locations here; navigate to the very end, and add the following text (assuming that you have chosen C:\Android-adb as the folder; otherwise, enter whatever path you’ve located adb at):
;C:\Android-adb
Click OK, finally.
Your ADB folder is now configured, and you can run both ADB and Fastboot commands from anywhere in command prompt. To verify, connect your Android device to PC with USB Debugging enabled, launch a command prompt window, and type “adb devices” (without quotes). The daemon will start up, and all connected devices will be listed.
Mac Instructions
http://esausilva.com/2010/10/02/how-to-set-up-adb-android-debug-bridge-in-mac-osx/
Pc Instructions
http://www.redmondpie.com/how-to-set-up-android-adb-and-fastboot-on-windows-tutorial/
Now that ADB is installed. If you find yourself in a Bootloop, OR you find yourself in a situation where it wont pass by the boot animation, open up terminal or command prompt. Then type Adb Devices, it should recognize your device and list the serial. And from there you can use the command:
Adb Reboot Recovery
From there you can wipe/Factory Restore and then Flash a new rom.
If you cannot reboot recovery but ADB still sees your phone. You can use command ADB shell to open a linux command prompt through your phone to push and pull files. Ive done this to push roms when the phone wouldnt mount properly.
I know this isnt "THAT" thorough, however ADB has litterally saved my ass a BUNCH of times. Id reccomend setting it up if you flash frequently.
Sorry it took me a couple days to respond, i am not on XDA as much as i used to be.
RE:
Thanks for documenting this.
So any solutions/ideas to people who can't get our computer's to recognize our device? Unfortunately, that's the position I'm in

Categories

Resources